Material Ordering Data- All.pdf

MATERIAL ORDERING DATA

ASME B1.1

Any specification that is referenced in this Material Order Data sheet is required to be to the latest revision at time of award.

IDN: N4523A 3274-1200

ICN: 38CTB469W2 KO: S09 KOI: 040

Paragraph 6.2 Ordering Data

A. ASME B1.1, UNIFIED INCH SCREW THREADS (UN AND UNR THREAD

FORM), dated 2019.

B. Quantity: 16 C. Size: .625" DIA. X 2.01" LG. [THREAD LENGTH PER ATTACHED SKETCH] D. Type: 11UNC-2A

Additional Data Requirements: CHEMICAL AND MECHANICAL PROPERTIES MUST MEET THE REQUIREMENTS OF ASTM B446/B446M (UNS N06625, GR-1) dated 01

NOV 2022

REQUIRED MINIMUM STRENGTH OF STUDS IS 80 KSI.

All unit, intermediate and shipping containers must be marked in accordance with MIL-STD-129. Refer to DLA Procurement Note C20 for further instructions

Prepared By: kurtis weber

Code: 250.2

FED-STD-H28

p 1 of 1

Any specification that is referenced in this Material Order Data sheet is required to be to the latest revision at time of award.

IDN: N4523A 3274-1201

ICN: 38CTB469W2 KO: S09 KOI: 041

Paragraph 6.2 Ordering data

A. FED-STD-H28/2B, SCREW-THREAD STANDARDS FOR FEDERAL SERVICES,

SECTION 2 UNIFIED INCH SCREW THREADS-UN AND UNR THREAD FORMS

dated 20 AUG 1991. VALID NOTICE 3 dated 27 FEB 2019.

B. Quantity: 16 C. Size: 0.375" DIA. X 5.125" LG. [THREAD LENGTH PER ATTACHED SKETCH].

D. Type: 16UNC-2A

Additional requirements:

CHEMICAL and MECHANICAL PROPERTIES MUST MEET THE REQUIREMENTS OF ASTM B446 (INCONEL, UNS N06625) dated 01 APR 2019

All unit intermediate and shipping containers must be marked in accordance with MIL-STD-129. Refer to DLA Procurement Note C20 for further instructions.

Prepared By: Kurt Weber

MIL-S-24149

IDN: N4523A - 3274 - 1201

ICN: 38CTB469W2 KO: S09 KOI: 041

Any specification that is referenced in this Material Order Data sheet is required to be to the latest revision at time of award.

Paragraph 6.2 Ordering Data

A. MIL-S-24149C, STUDS, WELDING, AND ARC SHIELDS (FERRULES),

GENERAL SPECIFICATION FOR, dated 27 MAR 1989.

REINSTATEMENT NOTICE 2, dated 21 AUG 2000 INCLUDING AMENDMENT 1, dated 01 DEC 1989.

B. Current issue of DODISS is to be cited in the solicitation (see 2.1.1 and 2.2).

C. Type of stud and arc shield (see 1.2):

Type I – Carbon steel studs, fluxless weld-end

Type II – Carbon steel studs, solid flux or aluminum flux coated weld-end

Type III – Aluminum alloy studs, bulb weld-end

Type IV – Aluminum alloy studs, cone protection weld-end

Type V – Corrosion-resistant steel studs, solid flux weld-end

Type VI – Carbon steel studs, tipped or pointed weld-end

Type VII – Aluminum alloy studs, tipped or pointed weld-end

Type VIII – Corrosion-resistant steel studs, tipped or pointed weld-end

D. Applicable Military Specification Sheet part numbers: N/A E. First article inspection is not required. (see 3.2, 4.3 and 6.4) F. Type of protective coating or treatment (see 3.6): N/A G. If inspection conditions are other than specified (see 4.4.2): N/A H. Level of preservation and packing requirements (see 5.1): LEVEL C I. When fire-retardant requirements are required (see 5.1(a)(1)(2): N/A

Additional Data Requirements:

SEE ATTACHED DRAWING FOR FURTHER SPECIFICATIONS/DETAILS.

MANUFACTURER SHALL TAKE ALL PRECAUTIONS NECESSARY TO

PRECLUDE THE ENTRAPMENT OF FLUIDS, DEBRIS OR ANY GAPS BETWEEN

THE FLUX BALL AND THE FLUX BALL CAVITY. FAILURE TO DO SO WILL

RESULT IN UNACCEPTABLE WELDS. THE INFORMATION CONTAINED IN

MANUFACTURER SHALL NOTE THAT THIS DOCUMENT APPLIES ONLY TO

THE FLUX AND FLUX BALL CAVITY REQUIREMENTS.

MIL-S-24149

Prepared By: Kurt Weber Code: 250

IDN: N4523A 3274-1202

ICN: 38CTB469W2 KO: S09 KOI: 048

B. Quantity: 6 C. Size: 0.625" DIA. X 2.75" LG [THREAD LENGTH PER ATTACHED SKETCH] D. Type: 11UNC - 2A

Additional Data Requirements: Chemical and mechanical properties must meet the requirements of ASTM B446/B446M (UNS N06625, GR-1) dated 01 NOV 2022.

REQUIRED MINIMUM STRENGTH OF STUDS IS 80 KSI.

IDN: N4523A 3274-1203

ICN: 38CTB469W2 KO: S09 KOI: 047

B. Quantity: 33 C. Size: 1.5" DIA. X 3.75" LG. [THREAD LENGTH PER ATTACHED SKETCH] D. Type: 12UNJF -2A

Additional Data Requirements: Chemical and Mechanical properties must meet the requirements of ASTM B446/B446 (UNS N06625, GR-1] dated 01 NOV 2022 Required minimum strength of studs is 80 ksi.

All unit intermediate and shipping containers must be marked in accordance with

IDN: N4523A 3274-1204

ICN: 38CTB469W2 KO: S09 KOI: 046

B. Quantity: 13 C. Size: 0.875" DIA. X 2.62" LG. [THREAD LENGTH PER ATTACHED SKETCH] D. Type: 9UNC -2A requirements of ASTM B446/B446M (UNS N06625 GR-1) dated 01NOV2022

Required minimum strength of studs is 80 ksi.

IDN: N4523A 3274-1205

ICN: 38CTB469W2 KO: S09 KOI: 044

B. Quantity: 5 C. Size: 0.625" DIA. X 2.66" LG. [THREAD LENGTH PER ATTACHED SKETCH] D. Type: 11UNC -2A

Additional Data Requirements: Chemical and Mechanical Properties must meet the requirements of ASTM B446/B446M (UNS N06625, GR-1) dated 01NOV 2022327

Required minimum strength of studs is 80 ksi.

IDN: N4523A 3274-1206

ICN: 38CTB469W2 KO: S09 KOI: 043

B. Quantity: 17 C. Size: 0.625" X 2.56" LG. [THREAD LENGTH PER ATTACHED SKETCH] D. Type: 11UNC -2A requirements of ASTM B446/B446M (UNS N06625., GR-1) dated 01 NOV 2022

Required minimum strength of studs is 80 ksi.