MATERIAL ORDERING DATA 2.pdf

MATERIAL ORDERING DATA

MIL-S-24149

IDN: N4523A - 2287 - 1003

ICN: 38CTB469W2 KO: S09 KOI: 019

Paragraph 6.2 Ordering Data

A. MIL-S-24149C, STUDS, WELDING, AND ARC SHIELDS (FERRULES),

GENERAL SPECIFICATION FOR, dated 27 MAR 1989.

REINSTATEMENT NOTICE 2, dated 21 AUG 2000 INCLUDING AMENDMENT 1, dated 01 DEC 1989.

B. Current issue of DODISS is to be cited in the solicitation (see 2.1.1 and 2.2).

C. Type of stud and arc shield (see 1.2):

Type I – Carbon steel studs, fluxless weld-end

Type II – Carbon steel studs, solid flux or aluminum flux coated weld-end

Type III – Aluminum alloy studs, bulb weld-end

Type IV – Aluminum alloy studs, cone protection weld-end

Type V – Corrosion-resistant steel studs, solid flux weld-end

Type VI – Carbon steel studs, tipped or pointed weld-end

Type VII – Aluminum alloy studs, tipped or pointed weld-end

Type VIII – Corrosion-resistant steel studs, tipped or pointed weld-end

D. Applicable Military Specification Sheet part numbers: N/A

E. First article inspection is not required. (see 3.2, 4.3 and 6.4)

F. Type of protective coating or treatment (see 3.6): N?A

G. If inspection conditions are other than specified (see 4.4.2): N/A

H. Level of preservation and packing requirements (see 5.1): N/A

I. When fire-retardant requirements are required (see 5.1(a)(1)(2): N/A

Additional Data Requirements:

ASTM-B446, UNS N06625GRADE 1, COND HF ANNEALED AND PICKLED

Prepared By: Kurt Weber

Code: 250.2