The file's text, extracted by GovTribe without its formatting.
MATERIAL CHARACTERIZATION TESTING SERVICES
STATEMENT OF WORK (SOW)
1.0 BACKGROUND
The Naval Surface Warfare Center, Dahlgren Division (NSWCDD), Electromagnetic and Sensor Systems Department (Code B), Electronic Warfare and Spectrum Operations Division (Code B30), Advanced Electronic Warfare Prototyping Branch (B35) requires material characterization testing services and expert analysis for a base period of 12-months with one (1) option period of 12-months to follow.
2.0 APPLICABLE DOCUMENTS
N/A
| 3.0 | REQUIREMENTS |
| 3.1 | The Contractor shall provide all the labor, sample prep, and test hardware to perform material characterization and analysis on samples, which are substrate with various materials used in semiconductor manufacturing and photodetector material processes. |
NOTE: The Government anticipates that up to three (3) Fourier Transform Infrared (FTIR) Spectroscopy tests, FTIR, X-ray Photoelectron Spectroscopy (XPS) Interface, X-ray Photoelectron Spectroscopy (XPS) Depth and Raman Spectroscopy tests will be funded at award. Additional tests may be exercised upon requirement needs and funding availability, including Transmission Electron Microscope (TEM), Scanning Electron Microscope (SEM), and Focused Ion Beam (FIB).
3.1.1 The Government anticipates the following test and analysis requirements throughout the base and optional periods:
| Item |
| Test Description |
| Sample Quantity |
| 0001 |
| X-ray Photoelectron Spectroscopy (XPS) Depth |
| 3 |
| 0002 |
| X-ray Photoelectron Spectroscopy (XPS) Interface |
| 3 |
| 0003 |
| Fourier Transform Infrared (FTIR) Spectroscopy |
| 3 |
| 0004 |
| Raman spectroscopy |
| 3 |
| 0006 |
| Transmission Electron Microscope (TEM) |
| 3 |
| 0008 |
| Transmission Electron Microscope (TEM) |
| 3 |
| 0012 |
| Raman Spectroscopy |
| 3 |
| 0018 |
| Raman Spectroscopy |
| 3 |
| 3.1.2 | The Contractor shall be able to provide each and all capabilities listed in the table above. |
| 3.1.3 | The Contractor shall probe each sample at 785nm, 514 nm, 488nm, 405nm during the Raman Spectroscopy tests. |
| 3.1.4 | The Contractor shall notify the Technical Point of Contact (TPOC) identified below at least 5 days prior to performing any tests in order to allow the Government time to coordinate a visit request with the laboratory to witness select testing. |
| 3.1.5 | The Contractor shall handle all samples with care since the Government has limited samples available for performing these tests. |
| 3.1.6 | The Contractor shall perform all services at the Contractor’s facility. |
| 3.1.7 | The Contractor shall coordinate all work with the TPOC identified below. |
| 4.0 | DATA DELIVERABLES |
The Contractor shall provide data results in accordance with (IAW) CDRL A001.
| 5.0 | GOVERNMENT-FURNISHED PROPERTY/MATERIAL/INFORMATION (GFP/GFM/GFI) |
| 5.1 | The Government will provide initial CEPSIS samples within 30 days after receipt of the order. |
| 5.2 | The Government will notify the laboratory prior to all additional sample shipments for test and analysis. |
| 6.0 | SECURITY |
Work performed under this contract is unclassified.
7.0 TRAVEL
The Contractor will not be required to travel in performance of this contract.
8.0 TECHNICAL POINT OF CONTACT (TPOC)
Bill Roberts
NSWCDD/B35
Address: 18444 Frontage Road Suite 327 Phone: 540-653-9213 Email: WILLIAM.R.ROBERTS1@NAVY.MIL