M6786122Q0025_SF1449.pdf

SEE ADDENDUM

(No Collect Calls)

M6786122Q0025 07-Sep-2022

b. TELEPHONE NUMBER

504-697-8343

8. OFFER DUE DATE/LOCAL TIME

01:00 PM 12 Sep 2022

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

M678619. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

LIZBETH ROBLES

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

0 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

M263812148814

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED OR X

SMALL BUSINESSX

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

MARINE FORCES RESERVE

REGIONAL CONTRACTING OFFICE

2000 OPELOUSAS AVE

NEW ORLEANS LA 70114

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE M14101 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

HQ CO, 23RD MARINES REGIMENT

900 COMMODORE LANE

SAN BRUNO CA 94066-0000

TEL: FAX:

FAX:

TEL: SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

NAICS:

339920

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

X

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT 41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

M6786122Q0025

Section SF 1449 - CONTINUATION SHEET

GYM EQUIPMENT AND INSTALLATION

Statement of Work (SOW)

Project: 23rd MAR 4th MARDIV Gym Equipment Package

The site address is:

INSPECTOR-INSTRUCTOR

23D MAR 4TH MARDIV

900 COMMODORE DRIVE

SAN BRUNO, CA 94066

1. Scope: The purchase, delivery, and installation of commercial gym equipment in San Bruno, CA at the site address listed above for 23d Marine Regiment, 4th Marine Division.

2. Project Manager: All required actions will come through the Government Project Manager (PM). The

Government PM will be Master Sergeant Hugo Roman 760-509-6825 (hugo.roman@usmc.mil).

3. Contractor POC: Contractor will provide a project point-of-contact (POC) within 5 days of award. Project POC shall provide:

a. Project plan and milestone schedule 5 days after contract is awarded.

b. Confirmation of coordination for item delivery, project installation, and inventory control with Government

PM within 10 days of contract award.

c. Project closure meeting once project is complete will be coordinate with Government PM (virtual via MS

Teams/Skype or in-person).

d. Performance of work executed within normal business practices.

e. Contractor Project POC will coordinate all changes with Government PM/Contracting Office.

f. Invoice acceptance and processing for payment will occur only after project is completed with all required deliverables.

4. Schedule: Installation date and scope of work should be completed no later than 30 days after the contract has been awarded. However on a case by case basis, if an adjustment to the installation schedule needs to be arranged; coordination with the Government PM is required and can only be approved by the Government PM.

a. Site Visit Dates: Monday – Friday 0800 – 1600 (call Government PM for access)

b. Installation will be conducted during normal working hours, Monday – Friday 0800 – 1600, or at the customer’s discretion and during non-holiday hours.

c. Installation will be completed no later than 30 days from the award date.

5. Contractor Services:

- Contractor is responsible for accurate measurements and proper placement of all equipment requested, inside delivery and installation of all equipment.

- Contractor is responsible for shipping and installation to the area that the equipment is to be delivered and installed, whether temporarily stored or otherwise.

- Contractor must use a trusted/known source for equipment installation. “Trusted/known” will be defined as a service provider that will not void any warranties by utilizing their services. If Contractor utilizes a temporary employment agency (i.e. “Labor Ready”), the workers must have the skill sets for and prior work experience installing commercial quality fitness equipment.

- Contractor is responsible for the installation of all equipment, including applicable flooring based on square footage measurements provided.

6. Discrepancies: The Government reserves the right to refuse final acceptance until all discrepancies have been satisfactorily resolved. The contractor shall prepare a project discrepancy list, report detected issues during meetings, and track all discrepancies until resolved. The Government shall review and monitor all discrepancies and deliverables. The discrepancy list shall include any problem(s) identified during inspections that are conducted by either the contractor or Government, or both. The contractor shall retain a history of discrepancies. Problems identified at any time during the course of this project shall be documented, provided to the Government, and corrected prior to final acceptance.

7. Quality Assurance:

A. This section identifies the method of the Government’s Quality Assurance Plan (QAP) will use to verify the quality of the contractor’s performance.

B. Re-performance of unacceptable services at no additional cost is the preferred course of action when appropriate.

C. If adverse conditions or other factors beyond the Contractor’s control are the cause for failure to meet contract specifications, no remedy will be assessed against the Contractor for failure to perform provided each incidence is documented by the contractor and submitted to the Government PM for approval by the Contracting Officer (KO). If the parties do not agree that the cause is due to factors beyond the Contractor’s control, the Contractor may proceed with a dispute under the contractor’s FAR Clause 52.212- 4.

D. Government PM shall be notified on progress of installation/repairs in order to allow scheduling to witness work at the site.

E. FAILURE TO INSPECT. If the Contractor fails to notify the Government PM that the work is ready for inspection, or the Contractor fails to attend an inspection after notification, then the Government PM may conduct an inspection at his/her own convenience, and his/her findings shall be considered as if they had been mutually agreed upon in a joint inspection, and the Contractor will be considered to have chosen not to correct any deficiencies. See the paragraph entitled “Government Remedies” below for the consequences of this situation.

F. GOVERNMENT REMEDIES. The KO will follow the Service Delivery Summary below, FAR 52.212-4, Contract Terms and Conditions-Commercial Items and 52.246-4 Inspection of Services, for Contractor’s failure to perform satisfactory services or failure to correct non-conforming services.

8. Changes: The Government PM is not authorized to make any changes to this contract. Only a warranted

Contracting Officer (KO) is authorized to make changes to this contract. In the event the contract effects any change at the direction of any person other than the KO, the change will be considered to have been made without authority and no adjustment will be made in the contract price to cover any increase incurred as a result there of.

9. SAFETY GUIDANCE:

Contractors shall adhere to all relevant safety guidance, including (but not limited to):

(a) EM 385-1-1 – U.S. Army Corps of Engineers Safety and Health Requirements Manual

(b) OPNAVINST 5100.23 (series), Navy Occupational Health and Safety Program Manual

(c) MCO 5100.29 (series), Marine Corps Safety Program

(d) MCO 5100.8, Marine Corps Occupational Safety and Health (OSH) Policy Order

(e) NAVMC DIR 5100.8, MARCOR OSH Program Manual

Government PM shall immediately report accidents/injuries sustained during contract performance to the KO and responsible agency safety officials.

Salient Characteristics Requirement List

Preferred Colors - shall apply to all Frame Color: Silver Upholstery Color: Black

0001 - Commercial Treadmill: Brand Name Equivalent: Life Fitness INTDST Integrity Series Treadmill (3)

Shall have shock absorption system to reduce musculoskeletal injuries.

Shall have a 16” 1080p touch screen console Shall have a maximum user weight of up to 400 lbs.

Shall provide a belt wear maintenance notification alert.

Shall have a heart rate monitoring system with capability to connect to other commercial heartrate tracking systems via Telemetry and Bluetooth.

Shall have the capability to reach a maximum speed of 14 mph.

Shall have the capability to produce a 15% incline while in operation.

Shall have a running surface of no less than 60 x 22” Shall have functional/virtual trainer software to help users meet goals and to provide feedback on progress.

Shall have a reading rack, 2 cup holders, and integrated accessory tray.

Shall have a motor system with a 4-HP AC continuous duty and up to 8-HP peak duty.

Shall have an electrical power requirement of 120 volts/20 amp circuit.

Shall have an integrated sensor that detects when user has left the treadmill and prompt user if workout will continue or initiate shut-down protocol.

Shall have side rails and a front rail for additional safety components to minimize fall risks.

Shall be a welded steel frame with roller lift wheels and rear levelers.

Shall have a USB port to charge devices and for software update.

Shall provide multiple training options as standard programming for users.

Shall be compatible to devices using no less than iOS 4.3 and no less than Android 4.0.

0002 - Commercial Elliptical: Brand Name Equivalent: Life Fitness INXDST Integrity Series Elliptical (1)

Shall have a 16” 1080p touch screen console with Bluetooth compatibility & wireless connectivity.

Shall have a heart rate monitoring system with capability to connect to other commercial heartrate tracking systems via Telemetry and Bluetooth.

Shall be compatible to devices using no less than iOS 4.3 and no less than Android 4.0.

Shall have a USB port to charge devices and for software update.

Shall have a maximum user weight of up to 400 lbs.

Shall provide multiple training options as standard programming for users.

Shall have oversized non-slip pedals Shall provide multiple automatic and manual resistance levels.

Shall have resistance controls on moving handlebars.

Shall have front wheels attached to provide easy mobility of equipment.

Shall have a reading rack and integrated accessory tray.

0003 - Commercial Upright Bike: Brand Name Equivalent: Life Fitness INCDST Integrity Series Upright Bike (1)

Shall have a 16” 1080p touch screen console with Bluetooth compatibility & wireless connectivity.

Shall have a heart rate monitoring system with capability to connect to other commercial heartrate tracking systems via Telemetry and Bluetooth.

Shall be compatible to devices using no less than iOS 4.3 and no less than Android 4.0.

Shall have a USB port to charge devices and for software update.

Shall have a maximum user weight of up to 400 lbs.

Shall have non-adjustable handlebars.

Shall have front wheels attached to provide easy mobility of equipment.

Shall have vertical adjustments for oversized unisex seat/saddle.

Shall have integrated water bottle holder.

Shall have frame stabilizer bars and protection plates.

Shall provide multiple training options as standard programming for users.

Shall have wide pedals Shall provide multiple automatic and manual resistance levels.

Shall have resistance controls on handlebars.

0004 - Commercial Recumbent Bike: Brand Name Equivalent: Life Fitness INRDST Integrity Series Recumbent Bike (1)

Shall have a 16” 1080p touch screen console with Bluetooth compatibility & wireless connectivity.

Shall have a heart rate monitoring system with capability to connect to other commercial heartrate tracking systems via Telemetry and Bluetooth.

Shall be compatible to devices using no less than iOS 4.3 and no less than Android 4.0.

Shall have a USB port to charge devices and for software update.

Shall have a maximum user weight of up to 400 lbs.

Shall have non-adjustable handlebars.

Shall have front wheels attached to provide easy mobility of equipment.

Shall have vertical adjustments for oversized unisex seat/saddle.

Shall have integrated water bottle holder.

Shall have frame stabilizer bars and protection plates.

Shall provide multiple training options as standard programming for users.

Shall have wide pedals with straps Shall provide multiple automatic and manual resistance levels.

Shall have resistance controls on handlebars.

0005 - Commercial Indoor Cycle: Brand Name Equivalent: Life Fitness IC5B2 Indoor Cycle (1)

Shall have a self-powered touchscreen LCD display with Bluetooth compatibility & wireless connectivity.

Shall have a heart rate monitoring system with capability to connect to other commercial heartrate tracking systems via Telemetry and Bluetooth.

Shall have a maximum user weight of up to 330 lbs.

Shall have adjustable handlebars with vertical and horizontal adjustments.

Shall have front wheels attached to provide easy mobility of equipment.

Shall have vertical adjustments for unisex seat/saddle with vertical and horizontal adjustments.

Shall have integrated water bottle holder.

Shall have frame stabilizer bars and protection plates.

Shall provide multiple training options as standard programming for users.

Shall have dual-sided SPD pedals Shall provide manual resistance levels.

0006 - Commercial Stair Climber: Brand Name Equivalent: Life Fitness INPMDST Powermill (1)

Shall have a 16” 1080p touch screen console with Bluetooth compatibility & wireless connectivity.

Shall have a heart rate monitoring system with capability to connect to other commercial heartrate tracking systems.

Shall be compatible to devices using no less than iOS 4.3 and no less than Android 4.0.

Shall have a USB port to charge devices and for software update.

Shall have a reading rack, 2 cup holders, and integrated accessory tray.

Shall have a wide non-slip 2-tone stair pattern for added safety and easy visibility.

Shall provide multiple automatic and manual resistance levels.

Shall be a welded steel frame with roller lift wheels and rear levelers.

Shall have 4 wheels attached for easy mobility and positioning.

Shall have support handlebars on each side for supplemental aid to user and to minimize fall or injury risks.

0007 - Commercial Air Bike: Brand Name Equivalent: Assault Fitness AS-ABC Assault Air Bike Classic (1)

Shall be no more than 50” (L) x 23” (W) Shall be manufactured from heavy duty steel.

Shall have a maximum user weight of up to 300 lbs.

Shall be self-powered by user.

Shall have vertical adjustments for unisex seat/saddle with vertical and horizontal adjustments.

Shall include reinforced pedals and crank.

Shall include LCD digital display with visual tracking of: Watts; RPM; Elapsed Time; Distance; Heart

Rate; Interval Training; Calories.

Shall have a steel fan with a diameter no more than 27”.

Shall have industrial grade powder coating.

Shall have adjustable leveling feet for stabilizing.

Shall have include removable transportation/Caster wheels for easy mobility.

0008 - Commercial Ladder Trainer: Brand Name Equivalent: Jacobs Ladder JL2 (1)

Shall be no more than 76” (L) x 27” (W) Shall have a maximum user weight of up to 330 lbs.

Shall be self-powered by user.

Shall include waist belt as safety feature during use.

Shall include built-in digital display with visual tracking of: Elapsed Time; Distance in Feet; Heart Rate;

Rate Feet/Minute; Calories.

Shall include AC Adapter to power the display.

Shall have side handles that support user during use.

Shall have include removable transportation/Caster wheels for easy mobility.

0009 - Commercial Indoor Rower: Brand Name ONLY: Concept2 Model D Indoor Rower (2)

Shall be no more than 96” (L) x 24” (W) Shall weigh no less than 57 lb and have a weight capacity of up to 500 lb Shall provide tools and illustrated instructions for easy assembly Shall include a Performance Monitor 3 (PM3) or most current performance monitor Shall be manufactured with a flywheel design that houses a low maintenance nickel plated chain Shall provide a spiral damper control ranging from 1 – 10 Shall include an Ergonomic handle Shall be manufactured with an aluminum rail and capped with a stainless steel track for proper operation of seat roller Shall include an adjustable monitor arm Shall include an adjustable Flexfoot footrests for quick and easy sizing Shall easily separate in order to transport and for storage Shall be manufactured with Caster wheels for easy mobility

0010 - Commercial Multi-Station Cable Machine: Brand Name Equivalent: Life Fitness MJ5- Multi-Jungle Platform Station (1)

Shall have (1) core tower with multi-station capability Each station shall have its own weight stack.

Stations shall include: (1) Lat Pulldown, (1) Row, (1) Adjustable Pulley Cable Crossover, (1) Triceps

Pushdown, (1) Multi-grip handles for pull-ups Each weight stack shall have a 1:2 resistance ratio Shall have accessory racks for attachment handles

0011 - Commercial Multi-Station Core Tower: Brand Name Equivalent: Life Fitness MJCORE (1)

Shall have 4 separate functioning stations Shall have 4 separate weight stacks

Each weight stack shall have a 1:2 resistance ratio Shall have attachment capability for accessory rack

0012 - Commercial Adjustable Pulley: Brand Name Equivalent: Life Fitness MJAP (1)

Shall have the capability to adjust to different heights Shall have attached locking mechanism built into adjustable pulley system Shall have the capability to move in a horizontal plane Shall have 2:1 pulley ratio Weight stack shall have a minimum of 190 lbs.

0013 - Commercial Lat Pulldown Station: Brand Name Equivalent: Life Fitness MJLP (1)

Shall have fixed single overhead pulley Shall have adjustable rolling pads Shall have a fixed seated pad Weight stack shall have a minimum of 260 lbs.

0014 - Commercial Low Row Station: Brand Name Equivalent: Life Fitness MJRW (1)

Shall have fixed single pulley Shall have an oversized fixed seated pad Shall have three attached platforms for feet placement Weight stack shall have a minimum of 260 lbs.

0015 - Commercial Adjustable Cable Crossover: Brand Name Equivalent: Life Fitness MJACO (1)

Shall have the capability to adjust to different heights Shall have attached locking mechanism built into adjustable pulley system Shall have the capability to move in a horizontal plane Shall have 2:1 pulley ratio Weight stack shall have a minimum of 190 lbs.

0016 - Commercial Handle Accessory Rack: Brand Name Equivalent: Life Fitness MJHAR (1)

Shall attach to the main core tower Shall have a minimum of 6 attached hooks Shall have a minimum of 2 attached posts to hold bar attachments

0017 - Commercial Heavy Duty Half Rack: Brand Name Equivalent: Hammer Strength HDLHRS (2)

Shall be no more than 16.5” (L) x 55.5” (W) x 96.5” (H) Shall have a max user weight of 400 lb.

Shall have a weight training capacity of up to 900 lbs.

Shall have weight storage capability attached to the rack.

Shall have lifting platform insert with bench locking feature.

Shall have a pair of top band pegs and sliding adjustable bottom band pegs attached to the rack.

Shall have a pair of spotter’s platforms attached to rack.

Shall have 2 pairs of different angled rubberized pull-up bar handles.

Shall have power pivot/rotational attached to rack.

Shall have single leg squat bar attached to rack.

0018 - Commercial Rack Weight Storage: Brand Name Equivalent: Hammer Strength HDLSTOR-SA (2)

Shall be no more than 8.25” (L) x 55.5” (W) x 96.5” (H) Shall attach to heavy duty half rack Shall have no less than 10 weight storing post that are 2” in diameter Shall have 2 attachments for storage of barbell collars Shall have 1 attachment for vertical storage of barbell

0019 - Commercial Locking Adjustable Bench: Brand Name Equivalent: Hammer Strength HDLADJ (2) Shall be no more than 50.5” (L) x 25.5” (W) x 18.5” (H) Shall have no less than 6 different press angles Shall have 3 adjustment settings for seated pad portion Shall have bench locking feature when being utilized on Olympic half rack platform Shall have attached lifting handle and transportation/Caster wheels for easy mobility Shall have a max user weight of 400 lbs.

Shall have a weight training capacity of up to 855 lbs.

0020 - Commercial Top Band Pegs: Brand Name Equivalent: Hammer Strength HDLTBP (2)

Shall be attached to top portion of half rack Attachments shall come in pairs

0021 - Commercial Bottom Sliding Band Pegs: Brand Name Equivalent: Hammer Strength HDSBP (2)

Shall be attached to bottom portion of half rack Shall slide forward for use and backwards for storage Attachments shall come in pairs

0022 – Commercial Spotter Platform: Brand Name Equivalent: Hammer Strength HDLSP (2)

Shall attach and detach from half rack without tools to provide optimal positions for spotter Shall provide slip resistant oversized foot platforms Shall have capability for foot platforms to lock into a vertical plane when not in use

0023 – Commercial Adjustable Dock-n-Lock: Brand Name Equivalent: Hammer Strength HDLDL (2)

Shall attach securely to half rack Shall fit and accommodate the placement of a half rack insert Shall provide no less than 9 locking positions for an adjustable bench

0024 – Commercial 2-Handle Pull-up Bar: Brand Name Equivalent: Hammer Strength HDL2PU (2)

Pull-up handle bars shall come in 2 different angles Handles shall be encased with a rubberized casing to improve gripping capability

0025 – Commercial Power Pivot/Landmine: Brand Name Equivalent: Hammer Strength HDLPP (2)

Shall provide the capability to perform a variety of rotational exercises Shall provide locking features to keep Olympic bars secure during use

0026 – Commercial Single Leg Squat Bar: Brand Name Equivalent: Hammer Strength HDLSLS (2)

Shall attach and detach from half rack without tools to provide optimal positions for user Shall provide upholstered rotating pad to improve uses movement while in use

0027 - Commercial 6x8 Lifting, Impact Suppression Platforms: Brand Name Equivalent: Hammer Strength

ISP-6X8 (2)

Shall be no more than 75.5” (L) x 94.5” (W) x 3.25” (H) Shall be manufactured with a 1.5” x 3” steel tube frame Shall have ability to attach to half rack via short base insert Shall have ability to attach platform ramp

0028 - Commercial Half Rack Short Base Insert: Brand Name Equivalent: Hammer Strength HDLHRS (2)

Shall be no more than 16.5” (L) x 42” (W) x 3” (H) Shall have ability to attach to half rack and lifting platform

0029 - Commercial Half Rack Platform Ramp: Brand Name Equivalent: Hammer Strength PF-RAMP-101 (2)

Shall be no more than 9” (L) x 30” (W) x 4” (H) Shall have ability to attach to lifting platform in order to provide easy mobility of bench off/on platform

0030 - Commercial Olympic Bar: Brand Name Equivalent: Rogue Fitness Ohio Power Bar RA0586-BEBR (2)

Shall have a minimum length of 86.52 inches Shall have a minimum bar shaft of 29 millimeters Shall have left, right, and center knurling at grip position Shall have a max weight of 45 lbs.

Shall have PSI tensile strength no more than 205k Shall only accommodate free-weight plates with 2 inch center holes

0031 - Commercial Curl Bar: Brand Name Equivalent: Iron Grip OB-EZ Curl Bar (2)

Shall have a minimum length of 54 inches Shall have a minimum shaft length of 32.75 inches Shall have a minimum sleeve length of 9.5 inches Shall have a minimum shaft diameter of 1.125 inches Shall have a minimum sleeve diameter of 1.965 inches Shall have knurling at each cambered grip position Shall have a max weight of 30 lbs.

Shall have anti-roll bar collars

0032 - Commercial Olympic Barbell Collars: Brand Name Equivalent: Lock-Jaw Pro 2 Collar OBC-LJP2 (8)

Shall have spring loaded snap latch Shall have large clamping lever Shall have interior elastomer pads

0033 - Commercial Multi-Adjustable Bench: Brand Name Equivalent: Hammer Strength FWMAB (1)

Shall have no less than 6 different press angles Shall have 3 adjustment settings for seated pad portion Shall have attached lifting handle and transportation/Caster wheels for easy mobility

0034 - Commercial Decline/Abdominal Bench: Brand Name Equivalent: Hammer Strength FW-DB (1)

Shall have no adjustment settings Shall have rubberized handle dismount support Shall have no less than 4 rolling pads

0035 - Commercial Weight Storage: Brand Name Equivalent: Hammer Strength FW-DWT (2)

Shall have no less than 8 weight storage horns

0036 - Commercial Glute/Ham Bench: Brand Name Equivalent: Hammer Strength BW-GH (1) Shall have adjustable rolling spit upholstered padding for feet placement Shall have half-moon split upholstered padding for mid-section support Shall have fixed split upholstered padding for knee placement Shall have fixed rubberized handles in order to complete adjustments by user and to provide support in mounting and dismounting bench Shall have rubberized feet placement to prevent sliding and slipping during mounting and dismounting bench

0037 - Commercial 10 Pound Hi-Temp Bumper Plates: Brand Name Equivalent: Rogue Fitness HT0004-10-2 (12)

Shall be no more than 1.37” in width Shall be constructed from recycled vulcanized rubber and a 2” stainless steel insert Shall have a diameter NLT 445mm regardless of weight Shall have weight numbers permanently molded into each plate Shall have a center hole NLT 2.015 inches in diameter and not to exceed 2.031 inches diameter

0038 - Commercial 15 Pound Hi-Temp Bumper Plates: Brand Name Equivalent: Rogue Fitness HT0004-15-2

Shall be no more than 1.87” in width Shall be constructed from recycled vulcanized rubber and a 2” stainless steel insert Shall have a diameter NLT 445mm regardless of weight

0039 - Commercial 25 Pound Hi-Temp Bumper Plates: Brand Name Equivalent: Rogue Fitness HT0004-25-2

Shall be no more than 2.25” in width Shall be constructed from recycled vulcanized rubber and a 2” stainless steel insert Shall have a diameter NLT 445mm regardless of weight

0040 - Commercial 35 Pound Hi-Temp Bumper Plates: Brand Name Equivalent: Rogue Fitness HT0004-35-2

Shall be no more than 3.12” in width Shall be constructed from recycled vulcanized rubber and a 2” stainless steel insert Shall have a diameter NLT 445mm regardless of weight

0041 - Commercial 45 Pound Hi-Temp Bumper Plates: Brand Name Equivalent: Rogue Fitness HT0004-45-2

Shall be no more than 3.75” in width Shall be constructed from recycled vulcanized rubber and a 2” stainless steel insert Shall have a diameter NLT 445mm regardless of weight

0042 - Commercial Bumper Plate Storage: Brand Name Equivalent: Hammer Strength FW-BPL (4)

Shall be no more than 72” (L) x 16” (W) x 12” (H) Shall have rubber feet to reduce floor/frame damage and for stabilization Shall have handle and transportation/caster wheels attached to frame for easy mobility

0043 - Commercial 9 Pound Kettlebells: Brand Name Equivalent: Rogue Fitness USC001-9 (2)

Shall have a handle diameter of 1.2” Shall be constructed from a single-piece ductile cast iron with an electrically-applied E-coat finish for added adhesion and corrosion resistance Shall have a flat machined based for steady storage and no wobble Shall have weight numbers debossed/pressed into each kettlebell

0044 - Commercial 13 Pound Kettlebells: Brand Name Equivalent: Rogue Fitness USC001-13 (2)

Shall be constructed from a single-piece ductile cast iron with an electrically-applied E-coat finish for added adhesion and corrosion resistance

0045 - Commercial 18 Pound Kettlebells: Brand Name Equivalent: Rogue Fitness USC001-18 (2)

Shall be constructed from a single-piece ductile cast iron with an electrically-applied E-coat finish for added adhesion and corrosion resistance

0046 - Commercial 26 Pound Kettlebells: Brand Name Equivalent: Rogue Fitness USC001-26 (2)

Shall have a handle diameter of 1.4” Shall be constructed from a single-piece ductile cast iron with an electrically-applied E-coat finish for added adhesion and corrosion resistance

0047 - Commercial 35 Pound Kettlebells: Brand Name Equivalent: Rogue Fitness USC001-35 (2)

Shall have a handle diameter of 1.5” Shall be constructed from a single-piece ductile cast iron with an electrically-applied E-coat finish for added adhesion and corrosion resistance

0048 - Commercial 44 Pound Kettlebells: Brand Name Equivalent: Rogue Fitness USC001-44 (2)

Shall be constructed from a single-piece ductile cast iron with an electrically-applied E-coat finish for added adhesion and corrosion resistance

0049 - Commercial 53 Pound Kettlebells: Brand Name Equivalent: Rogue Fitness USC001-53 (2)

Shall be constructed from a single-piece ductile cast iron with an electrically-applied E-coat finish for added adhesion and corrosion resistance

0050 - Commercial 62 Pound Kettlebells: Brand Name Equivalent: Rogue Fitness USC001-62 (2)

Shall be constructed from a single-piece ductile cast iron with an electrically-applied E-coat finish for added adhesion and corrosion resistance

0051 - Commercial 70 Pound Kettlebells: Brand Name Equivalent: Rogue Fitness USC001-70 (2)

Shall be constructed from a single-piece ductile cast iron with an electrically-applied E-coat finish for added adhesion and corrosion resistance

0052 - Commercial Kettlebell Rack 3 Tier: Brand Name Equivalent: Power Systems 32253084 (1)

Shall be no more than 54 (L) x 25” (W) x 36” (H) Shall have store NLT 18 pairs of kettlebells Shall have rubberized shelves to minimize damage to rack and for improved traction for kettlebells Shall have back lip on each shelf to prevent kettlebells from failing through

0053 - Commercial 10 Pound Medicine Ball: Brand Name Equivalent: D Ball DB14BK10 (1)

Shall have a diameter no less than 14” Shall be made of no less than 3/8” PVC rubber shell Shall have textured surface and raised rib rings for added grip Shall be manufactured to not bounce off any surface it strikes

0054 - Commercial 12 Pound Medicine Ball: Brand Name Equivalent: D Ball DB14BK12 (1)

Shall be made of no less than 3/8” PVC rubber shell

0055 - Commercial 14 Pound Medicine Ball: Brand Name Equivalent: D Ball DB14BK14 (1)

Shall be made of no less than 3/8” PVC rubber shell

0056 - Commercial 16 Pound Medicine Ball: Brand Name Equivalent: D Ball DB14BK16 (1)

Shall be made of no less than 3/8” PVC rubber shell

0057 - Commercial 18 Pound Medicine Ball: Brand Name Equivalent: D Ball DB14BK18 (1)

Shall be made of no less than 3/8” PVC rubber shell Shall have textured surface and raised rib rings for added grip Shall be manufactured to not bounce off any surface it strikes

0058 - Commercial 20 Pound Medicine Ball: Brand Name Equivalent: D Ball DB14BK20 (1) Shall have a diameter no less than 14” Shall be made of no less than 3/8” PVC rubber shell

0059 - Commercial Medicine Ball Rack: Brand Name Equivalent: Champion Sports RPXRACK (1)

Shall have capability of storing NLT 12 14” diameter medicine balls Shall be constructed from heavy-duty, all-steel construction.

Shall have transportation/caster wheels attached to frame for easy mobility Shall be no more than 58” (L) x 21” (W) x 45” (H)

0060 - Commercial 40’ Conditioning Rope: Brand Name Equivalent: Miami Cordage FITPD240 (1)

Shall be constructed from polypropylene material Shall have both ends covered with dense rubberized material for gripping during use Shall have center friction guard to reduce fraying

Shall be NLT 40’ in length and NLT 2” in diameter Shall have a tensile strength of 27,900 lbs.

0061 - Commercial Foam Roller: Brand Name Equivalent: TriggerPoint – Grid 1.0 (4)

Shall be composed of multi-density foam Shall have a hollow core design made of hard plastic Shall have a weight capacity of 500 lbs Shall be no more than 5.5” (L) x 5.5” (W) x 13” (H)

0062 - Commercial Push/Pull Weight Sled: Brand Name Equivalent: Rogue Fitness – RF0554 Dog Sled 1.2 (1)

Shall be constructed of 2x3” 11-gauge steel and tubing and 1/4" plate steel Shall have a pair of no less than 3’ upright push bars to accommodate both high and low push stances with a diameter of no more than 2” Shall accommodate free weights that have a center hole NLT 2.015 inches in diameter and not to exceed

2.031 inches diameter Shall have attachment capabilities to attach a rope or harness via carabiner Shall be no more than 40” (L) x 24” (W) x 40” (H)

Gym Equipment Requirement List

Sub

CLIN

Equipment (short description) Qty Brand Model #

"Brand Name or Equal"

(BN/E)

or "Brand Name Only

(BNO)"

Alt. Brand Offered (if applicable)

Alt. Model Offered (if applicable)

Unit Price

Total Price

Treadmill w/ Console 3 LifeFitness INTDST BN/E

Elliptical Cross Trainer w/ Console 1 LifeFitness INXDST BN/E

Upright Bike w/ Console 1 LifeFitness INCDST BN/E

Recumbent Bike w/ Console 1 LifeFitness INRDST BN/E

Group Exercise Bike w/Console 1 LifeFitness IC5B2 BN/E

0006 Stair Climber 1 LifeFitness INPMDST BN/E

Assault Air Bike 1

Assault Fitness AS-ABC BN/E

Commercial Ladder Trainer (1 per unit) 1

Jacobs Ladder JL2 BN/E

0009 Rower 2 Concept 2 Model D BNO N/A N/A

5-Station Multi Tower 1 Life Fitness MJ5 BN/E

Multi Jungle Core Tower (Need

1) 1 LifeFitness MJ-CORE BN/E

Multi Jungle Adjustable Pulley Station 1 LifeFitness MJAP BN/E

Multi Jungle Lat Pulldown Station 1 LifeFitness MJLP BN/E

Multi Jungle Low Row Station 1 LifeFitness MJRW BN/E

Multi Jungle Adjustable Crossover 1 LifeFitness MJACO BN/E

Multi Jungle Handle Rack 1 LifeFitness MJHAR BN/E

8’ Olympic Heavy Duty Half Rack (Short Base) 2

Hammer Strength HDLHRS BN/E

HD Elite Rack Weight Storage 2

Hammer Strength

HDLSTOR

-SA BN/E

HD Adjustable Bench (for HD racks only-add 1 for each) 2

Hammer Strength HDLADJ BN/E

Top Band Pegs (Pair) 2

Hammer Strength HDLTBP BN/E

Bottom Sliding Band Pegs (Pair) 2

Hammer Strength HDLSBP BN/E

Spotter Platform (pair) 2

Hammer Strength HDLSP BN/E

Adjustable Bench Dock N Lock 2

Hammer Strength HDLDL BN/E

2 Handle Pull Up Bar (2 pair -different angles -rubber sleeve) 2

Hammer Strength HDL2PU BN/E

Power Pivot or "Landmine"(ro tational development) 2

Hammer Strength HDLPP BN/E

Single Leg Squat Bar 2

Hammer Strength HDLSLS BN/E

6'x8" Impact Suppression Platform 2

Hammer Strength ISP-6X8 BN/E

Insert for HDE Half Rack 2

Hammer Strength

HDLHRS-

INS BN/E

Platform Ramp (1 for each Insert requested) 2

Hammer Strength

PF-RAMP-

101 BN/E

20kg Olympic Bar (1 for each HDE Rack requested) 2 Rogue

RA0586-

BEBR BN/E

5’ EZ Curl Bar (1 for each Arm Curl 2 Iron Grip OB-EZ BN/E requested + 1 extra)

Lock-Jaw Pro 2 Collars (2 sets per bar) 8 Lock-Jaw OBC-LJP2 BN/E

Dumbbell Adjustable bench (not for HDE Racks) 1

Hammer Strength FWMAB BN/E

Decline / Abdominal Bench 1

Hammer Strength FW-DB BN/E

0035 Weight Tree 2 Hammer Strength FW-DWT BN/E

Glute/Ham Bench 1

Hammer Strength BW-GH BN/E

0037 10 Pound Plate 12 Rogue

HT0004-

10-2 BN/E

0038 15 Pound Plate 12 Rogue

HT0004-

15-2 BN/E

0039 25 Pound Plate 12 Rogue

HT0004-

25-2 BN/E

0040 35 Pound Plate 12 Rogue

HT0004-

35-2 BN/E

0041 45 Pound Plate 12 Rogue

HT0004-

45-2 BN/E

Bumper Plate Storage Rack – Large (1 for each HDE Rack) 4

Hammer Strength FW-BPL BN/E

9 Pound Kettlebell 2 Rogue USC001-9 BN/E

13 Pound Kettlebell 2 Rogue

USC001-

13 BN/E

18 Pound Kettlebell 2 Rogue

USC001-

18 BN/E

26 Pound Kettlebell 2 Rogue

USC001-

26 BN/E

35 Pound Kettlebell 2 Rogue

USC001-

35 BN/E

44 Pound Kettlebell 2 Rogue

USC001-

44 BN/E

53 Pound Kettlebell 2 Rogue

USC001-

53 BN/E

62 Pound Kettlebell 2 Rogue

USC001-

62 BN/E

70 Pound Kettlebell 2 Rogue

USC001-

70 BN/E

Club KB Rack (Holds 18 indiv. KBs) 1

Power Systems 32253084 BN/E

10 Pound Medicine Ball 1

D-Ball by Mondo

DB14BK1

0 BN/E

12 Pound Medicine Ball 1

D-Ball by Mondo

DB14BK1

2 BN/E

14 Pound Medicine Ball 1

D-Ball by Mondo

DB14BK1

4 BN/E

16 Pound Medicine Ball 1

D-Ball by Mondo

DB14BK1

6 BN/E

18 Pound Medicine Ball 1

D-Ball by Mondo

DB14BK1

8 BN/E

20 Pound Medicine Ball 1

D-Ball by Mondo

DB14BK2

0 BN/E

Mobile Medicine Ball Rack 1

Champion Sports RPXRACK BN/E

2" Battling Ropes (40' Long) 1

Miami Cordage FITPD240 BN/E

Foam Roller (No more than 4 rollers) 4

Trigger Point TP0008 BN/E

0062 Prowler Sled 1 Rogue RF0554 BN/E

52.212-1 (ADDENDUM)

52.212-1, Instructions to Offerors-Commercial Products and Commercial Services Addendum (Nov 2021)

The Contractor’s quoted descriptions shall reflect the characteristics and level of quality that will satisfy the Government’s need as described in the Schedule of Supplies/Services. The quoter must clearly demonstrate that they can meet the solicitation requirements and the requested delivery start date. Delivery lead time after receipt of order for supplies and period of performance for services if different than listed in the solicitation document.

List by line item if the delivery lead time differs from one line item to another. This should be visible on the face of the quote and not incorporated as a link or other attachment.

It is the Government’s intent to award a single firm-fixed price award on an “all-or-none” basis to satisfy this requirement using procedures in accordance with FAR Part 12, Acquisition of Commercial Items, and FAR Part 13, Simplified Acquisition Procedures.

This requirement is a 100% set-aside to small businesses. The applicable NAICS is 339920 and the small business size standard is 750 Employees.

Payment Terms: NET 30. In accordance with DFARS 252.232-7006, invoices under the resulting contract shall be submitted electronically via Wide Area Workflow (WAWF). Specific instructions for invoicing through WAWF are contained in the solicitation.

Any direct customer contact by Quoters is not authorized during the solicitation phase or your quote may be at risk of being eliminated from consideration for this solicitation.

No telephone calls will be accepted regarding this solicitation. Interested quoters shall submit any questions, in writing, electronically to SSgt Robles, L. at lizbeth.robles@usmc.mil.

Quotes shall be submitted no later than 20220912 at 1:00 pm C.S.T. Quotes shall be submitted electronically via electronic mail (e-mail) to SSgt Robles, L. at lizbeth.robles@usmc.mil. Each email may not exceed 5MB in size due to this agency’s server/network restrictions. Vendors may submit multiple emails to ensure a complete quote is received prior to the solicitation closing date and time. Vendors are responsible for ensuring their quotes have been received via email by this date and time specified. Delivery delays that cause a quote to be late are not the responsibility of the Government agency.

Quoters shall provide their full vendor name and any doing business as names as certified in the mandatory System for Awards Management at www.sam.gov. Quotes shall also include a vendor point of contact information (name, phone, and email), address, CAGE Code, and Unique Entity Identifier (UEI) number.

Descriptive literature is required with all quotes for “equal” products (where “brand name or equal” items are being requested). Quoters should submit sufficient descriptive literature to permit the contracting agency to assess whether the product proposed meets all the salient characteristics specified in the solicitation. Quoters quoting "equal" items should provide the brand/make, model, description of the items.

It is the quoters responsibility to furnish sufficient information and detailed specifications to the government to determine acceptability of the quoted item(s). Failure to provide product quotes that meet the salient characteristics may result in quote being considered non-responsive.

(End of provision)

52.212-2 (ADDENDUM)

52.212-2, Evaluation-Commercial Products and Commercial Services Addendum (Nov 2021)

The Government reserves the right to award no contract at all, depending on the quality of quotes submitted. The Government intends to evaluate quotes and issue an order without discussions with vendors. Vendors should not expect requests for clarification or additional information from the Government. Award will be based on the initial evaluation of quotes received in response to the solicitation. However, the Government reserves the right to conduct discussions with vendors if later determined by the Contracting Officer to be necessary. The Government may reject any or all quotes if such action is in the public interest; and may waive informalities and minor irregularities in quotes received.

A comparative evaluation to obtain best value will be performed in accordance with FAR 13.106-2(b)(3) using:

-price;

-and non-price factors of: technical capability and past-performance.

The government reserves the right to select a response that provides benefit to the government that exceeds the minimum, but is not required to do so.

The awarded response may exceed the identified requirements in one or more ways and may or may not provide the lowest price, but does provide benefit to the Government as determined by the KO.

The Government is not bound to make award to a response that exceeds the requirements if it provides no value or benefit to the Government.

The Government may use information such as DoD PPIRS, SPRS and FAPIIS data available from Government sources to evaluate a Quoter's past performance.

Potential awardee will be screened for responsibility in accordance with FAR 9.104.

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Package Gym Equipment

FFP

Purchase, Delivery, & Installation of Gym Equipment. (Refer to salient characteristics list with model/part numbers with Statement of Work.)

FOB: Destination

MILSTRIP: M2638121488140001

PURCHASE REQUEST NUMBER: M263812148814

PSC CD: 7830

NET AMT

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 30-SEP-2022 1 HQ CO, 23RD MARINES REGIMENT

900 COMMODORE LANE

SAN BRUNO CA 94066-0000

FOB: Destination

M14101

CLAUSES INCORPORATED BY REFERENCE

52.204-7 System for Award Management OCT 2018 52.204-13 System for Award Management Maintenance OCT 2018 52.204-16 Commercial and Government Entity Code Reporting AUG 2020

52.204-18 Commercial and Government Entity Code Maintenance AUG 2020 52.212-1 Instructions to Offerors--Commercial Products and

Commercial Services

NOV 2021

52.212-4 Contract Terms and Conditions--Commercial Products and Commercial Services

NOV 2021

52.232-39 Unenforceability of Unauthorized Obligations JUN 2013 52.232-40 Providing Accelerated Payments to Small Business

Subcontractors

NOV 2021

252.203-7000 Requirements Relating to Compensation of Former DoD Officials

SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights SEP 2013 252.203-7005 Representation Relating to Compensation of Former DoD

Officials

NOV 2011

252.204-7003 Control Of Government Personnel Work Product APR 1992 252.204-7015 Notice of Authorized Disclosure of Information for Litigation

Support

MAY 2016

252.204-7016 Covered Defense Telecommunications Equipment or Services -- Representation

DEC 2019

252.204-7017 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services -- Representation

MAY 2021

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services

JAN 2021

252.204-7019 Notice of NIST SP 800-171 DoD Assessment Requirements MAR 2022 252.204-7020 NIST SP 800-171 DoD Assessment Requirements MAR 2022 252.213-7000 Notice to Prospective Suppliers on Use of Supplier

Performance Risk System in Past Performance Evaluations

SEP 2019

252.223-7008 Prohibition of Hexavalent Chromium JUN 2013 252.225-7001 Buy American And Balance Of Payments Program-- Basic JUN 2022 252.225-7001 Buy American And Balance Of Payments Program-- Basic JUN 2022 252.225-7048 Export-Controlled Items JUN 2013 252.225-7055 Representation Regarding Business Operations with the

Maduro Regime

MAY 2022

252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime

MAY 2022

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports

DEC 2018

252.232-7010 Levies on Contract Payments DEC 2006 252.232-7017 Accelerating Payments to Small Business Subcontractors--

Prohibition on Fees and Consideration

APR 2020

252.244-7000 Subcontracts for Commercial Items JAN 2021 252.246-7004 Safety of Facilities, Infrastructure, and Equipment for

Military Operations

OCT 2010

252.246-7008 Sources of Electronic Parts MAY 2018 252.247-7023 Transportation of Supplies by Sea FEB 2019

CLAUSES INCORPORATED BY FULL TEXT

52.204-24 REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO

SURVEILLANCE SERVICES OR EQUIPMENT (NOV 2021)

The Offeror shall not complete the representation at paragraph (d)(1) of this provision if the Offeror has represented that it "does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument" in paragraph (c)(1) in the provision at 52.204-26, Covered Telecommunications Equipment or Services-- Representation, or in paragraph (v)(2)(i) of the provision at 52.212-3, Offeror Representations and Certifications- Commercial Products and Commercial Services. The Offeror shall not complete the representation in paragraph (d)(2) of this provision if the Offeror has represented that it "does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services" in paragraph (c)(2) of the provision at 52.204-26, or in paragraph (v)(2)(ii) of the provision at 52.212-3.

(a) Definitions. As used in this provision-

Backhaul, covered telecommunications equipment or services, critical technology, interconnection arrangements, reasonable inquiry, roaming, and substantial or essential component have the meanings provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

(b) Prohibition.

(1) Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L.

115-232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. Nothing in the prohibition shall be construed to--

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(2) Section 889(a)(1)(B) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L.

115-232) prohibits the head of an executive agency on or after August 13, 2020, from entering into a contract or extending or renewing a contract with an entity that uses any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. This prohibition applies to the use of covered telecommunications equipment or services, regardless of whether that use is in performance of work under a Federal contract. Nothing in the prohibition shall be construed to--

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(c) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for "covered telecommunications equipment or…