M67400-18-Q-0040.pdf

M6740018Q0040

Section SF 1449 - CONTINUATION SHEET

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Lot Raids Training

FFP

See Schedule

FOB: Destination

NET AMT

0002 1 Lot Sustenance

FFP

The contractor will provide on-site full hot breakfasts, full hot lunches, and full hot dinners for the training audience and will be served in a cafeteria-style manner.

This includes arrival & departure days. These meals must be in compliance with the Special Operations Forces Nutrition Guide.

See Statement of Work

000201 Meals (Breakfast, Lunch, Dinner)

FFP

000202 Meals (Breakfast, Lunch, Dinner)

FFP

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 N/A N/A N/A Government

0002 N/A N/A N/A Government

000201 N/A N/A N/A N/A

000202 N/A N/A N/A N/A

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 POP 06-APR-2018 TO

30-APR-2018

N/A M13011

SEE SCHEDULE

FPO AP

M13011

0002 N/A N/A N/A N/A

000201 N/A N/A N/A N/A

000202 N/A N/A N/A N/A

STATEMENT OF WORK

STATEMENT OF WORK

Introduction 3d Reconnaissance Battalion requires contracted support to provide its personnel with development, sustainment, refinement, and enhancement of their existing skill sets in the direct-action, specialized limited-scale raid mission set. 3d Reconnaissance Battalion possesses a broad array of conventional and maritime special purpose-oriented tasks as part of their organizational Mission Essential Task List (METL); the quantity and scope of which exceed the capacity of III MEF Expeditionary Operations Training Group (EOTG) to train all subordinate elements of 3d

Recon Battalion, aside from 31st MEU Reconnaissance Detachments. As an operational expeditionary unit providing personnel in support of various combat and special-purpose assignments, 3d Reconnaissance Battalion requires consolidated manpower, materials, and facilities support to further its ability to sustain, refine and enhance proficiency levels in selected tasks and refine existing, multifaceted capabilities within their command. This outsourced specialized limited-scale raids training will include multi-disciplinary subject matter expert (SME) instruction, materials, facilities, and miscellaneous support unavailable within the existing III MEF and Training and

Education Command (TECOM) establishment.

References

1. Pre-Hospital Trauma Life Support/Tactical Combat Casualty Care (PHTLS/TCCC) protocols as established by the

American College of Surgeons Committee on Trauma, the National Association of Emergency Medical Technicians

2. FM 3-05.221 Special Forces Advanced Urban Combat Field Manual

3. NAVMC 3500.55C Reconnaissance Training & Readiness Manual

4. USASOC Approved Breaching and Facility Certification

5. MCRP 2-10A.6 Ground Reconnaissance Operations

6. Special Operations Forces Nutrition Guide 2012

Objectives

1. The contractor will provide a 20 (non-consecutive) day training package at a private training complex that satisfies all requirements of the SOW. The period of performance will be 6 - 30 APR 18. The complex should be no more than a 12-hour drive time or 700 miles from Austin, TX. The training unit requires a single complex that can provide all of the consolidated resources (personnel, materials, facilities, ranges and training areas) to enhance the individual and collective team/platoon-level skills of the force being trained. Individual, Team, Platoon

Standard Operating Procedures (SOP) and Tactics, Techniques, and Procedures (TTP) will be refined and validated upon completion of the training package. A single contractor-provided training complex will be utilized IOT minimize the cost of Transportation of Personnel and Things (TOP/TOT) within the designated period of performance parameter and will be executed in such a manner that maximizes the training time the force has available.

2. The contractor will provide training spaces/ training areas capable of accommodating 30 students in the execution of proposed training package. The Marines must be able to utilize these training areas for classroom instruction, billeting, weapons, ammunition, and gear storage, rehearsals, training, and messing. The trainings area must be capable of supporting all requirements as detailed below.

3. The contractor will provide (30 PAX) four days of TCCC with United States Department of Agriculture (USDA)

Approved Training (USDAAT), designed to develop, refine and enhance the latest operator and corpsman-level tactical medical skill sets in accordance with United States Special Operations Command (USSOCOM), PHTLS/TCCC Committee guidance, and USDA regulations. Hands-on based practical exercises will be conducted during this training IOT maximize learning and retention.

4. The contractor will provide (30 PAX) four days of basic pistol and carbine training to develop a sound base/foundation concentrating on the fundamentals of combat marksmanship in order to predictably/efficiently progress with advanced urban combat-oriented CQC marksmanship and tactics training.

5. The contractor will provide (30 PAX) five days of advanced pistol and carbine training designed to refine, further develop and enhance CQC skill sets needed to safely operate their primary and secondary weapons systems with precision in support of assigned profiles. This training should achieve the end-state of requisite speed and accuracy required to enhance mission success and survivability by continuing to build upon the sound foundation established in the preceding block of weapons training.

6. The contractor will provide (30 PAX) four days of urban combat tactics training designed to develop, sustain, and enhance the basic to advanced skills of dismounted rural/urban movement techniques and CQC tactics in a semi through non-permissive combat environment.

7. The contractor will provide (30 PAX) two days of supported Situational Training Exercises (STX) to fully integrate and evaluate the skills acquired / refined / enhanced during the preceding training. Scenarios will include the use of multiple target / mission sites to include a theater-specific Military Operations in Urban Terrain (MOUT) site, role players, Mission Event Synchronization List (MESL)-fed triggers / branches to closely replicate the operational situations these forces can expect to encounter in-theater. Scenarios shall be derived from mission profiles that expeditionary forces are currently experiencing in theater. Combat trauma mannequins, moulaged patients, and USDAAT models will be incorporated into the STX for sustainment of operational medicine skills and to enhance team treatment, stabilization, and CASEVAC procedures.

Scope The CQC and direct-action courses of fire must meet minimum threshold standards for III MEF EOTG Close-

Quarters Tactics Graduates. Graduate of this period of instruction will be expected to execute all raids-oriented, “E-

Coded” Training and Readiness (T&R) Manual events under the “Raids” category to the 5000-level.

Tasks The Government’s requirements include:

Contractor provided:

1. Facilities / Materials

1.A. Facilities

1.A.1. The facility should possess at a minimum, the below listed specialty ranges, target arrays, training areas, and facilities to fulfill the multidiscipline training and logistical requirements of this

SOW:

1.A.2. Multiple classrooms (audio / visual-capable that seat up to 30 personnel).

1.A.3. Reactive target range with a variety of pistol & carbine-capable pneumatic, automated, and steel targets.

1.A.4. Flat bay, 50 meter range that supports dynamic carbine and pistol engagements.

1.A.5. Minimum of one stand-alone, ballistic to 7.62mm, interior and exterior explosive, mechanical, and ballistic breaching-capable shoothouse.

1.A.6. Training houses shall possess overhead catwalks for evaluative and observation purposes and be quickly reconfigurable to change house layouts.

1.A.7. House shall possess multiple explosive exterior entry points and interior explosive and mechanical breaching points.

1.A.8. Shoothouse shall have a compound wall, possessing multiple explosive and vehicular breach points (indigenous gates and breaching sections).

1.A.9. Compound wall shall possess multiple personnel and vehicular ingress and egress points / gates.

1.A.10. PACOM-specific Maneuver range with concrete & metal construction urban areas

(without compound walls) that offer terrain and vegetation outside the site for ground/vehicle infiltrations that facilitates live fire and simmunitions movement profiles for the force to designated targets ISO STX.

1.A.12.PACOM-specific MOUT complex; complex with concrete & metal construction urban areas (without compound walls) that offer terrain and vegetation outside the site for ground/vehicle infiltrations to support force on force STX

1.A.13. An onsite fitness center with weight room and outdoor recreational area must be provided.

1.A.14. Contractor’s facility will possess Department of Defense (DoD)-compliant arms, ammunition storage rooms, magazines and bunkers IAW DoD 5100.76-M (Physical Security

Manual).

1.A.15. Contactor’s facility will be an approved DoD/ Bureau of Alcohol, Tobacco, & Firearms

(BATF) Class V Receiving Authority.

1.A.16. Contractor’s facility shall not have any day/night/weekend noise restrictions due to the type of training to be conducted.

1.A.17. Contractor’s facility will possess billeting structures large enough to house a minimum of

30 students in open-bay style buildings.

1.A.18. Billeting will have adequate shower, restroom and laundry facilities for same number of students within walking distance of the training areas.

1.A.19. Contractor will be able to provide internet access and be compatible with DoD computer systems.

1.A.20. Billeting units shall possess a team room large enough for gear stowage and with enough tables and chairs to accommodate 30 students.

1.A.21. Contractor’s facility will possess a dining facility large enough to serve 30 students within a short walk from the billeting units.

1.A.22. Contractor’s facility shall possess a fully functional gym complete with weights, nautilus machines, treadmills, medicine balls, kettle bells and other appropriate weight lifting equipment.

1.B. Materials

1.B.1. Minimum contractor material requirements: The awarded contractor will provide:

1.B.2. All targetry materials to include stationary reactive steel, paper re-faces, and specialty target arrays / systems.

1.B.3. Replacement doors and hardware for shoothouse re-configuration cycles.

1.B.4. All USDAAT Models, medical supplies, and scenario support materials.

2. Sustenance

2.A. The contractor will provide on-site full hot breakfasts, full hot lunches, and full hot dinners for the training audience and will be served in a cafeteria-style manner. This includes arrival & departure days. These meals must be in compliance with the Special Operations Forces Nutrition Guide and shall supply a balanced diet to maintain essential performance required for the training activities and also satisfy the following:

2.A.1. Breakfast – full hot breakfast consisting of a minimum of eggs, bacon, sausage, biscuits w/ gravy, cereal, waffles, oatmeal, hash browns, bread/toast, milk, orange juice, coffee, and whole fruit.

2.A.2. Lunch – full hot lunch consisting of a variety of two meats, bread, and full salad bar with multiple dressings, sweet tea, un-sweet tea, water, soups, potatoes, condiments, variety of fruits & vegetables and a dessert.

2.A.3. Dinner – full hot dinner, consisting of a variety of two meats, bread, and full salad bar with multiple dressings, sweet tea, un-sweet tea, water, soups, potatoes, condiments, variety of fruits & vegetables and a dessert.

3. TCCC/USDAAT

3.A. Instructor to student ratios for medical training not to exceed 1:10 during group skills training and 1:4 for practical exercises in patient assessment and USDAAT.

3.B. Skills-based practice and individual student evaluation for all items in the USMC’s individual medical kit, airway management, hemorrhage control, shock treatments and fluid resuscitation, bandaging and splinting, needle thoracostomy/tension pneumothorax management, medical administration, parenteral IVs and IOs, patient carries, stabilization and operational pain management.

3.C. All skills-based practical applications will be presented and demonstrated commensurate with the applicable references’ guidance pertaining to respective levels of training and experience of attending participants of the force being trained.

3.D. Contractor shall conduct three iterations of USDAAT ISO the TCCC portion of the training. Students will be required to manage all injuries consistent with those outlined in TCCC, those seen in combat, and the approved protocols, and to the level described in USMC directives. An overall student to patient ratio of

4:1 is required to maximize hands-on learning (1 patient per 4 students during tabletop and 1 unused patient per 2 students during scenarios).

3.E. Respective training will include a TCCC Pre and Post-test and a pass/fail rate will be provided to the unit. Course completion certificates will be issued to validate compliance with USMC TCCC training requirements.

3.F. Continuing Education Coordinating Board for Emergency Medical Services (CECBEMS)-accredited continuing education units (CEUs) will be required for students who qualify (corpsman and Emergency

Medical Technicians (EMT)).

4. Basic pistol and carbine

7.A. Instructor to student ratio of 1:5 to provide combined assessment and performance evaluated courses of fire to sustain and enhance the requisite levels of knowledge, understanding and basic combat marksmanship skills.

7.B. Urban combat marksmanship instructors to assess, develop, refine and enhance basic performance levels to ensure demonstrated abilities of attending personnel are capable of progressing to the next phase of training IAW the performance objectives as listed below:

7.C. Performance objectives include: weapons safety and manipulations / weapons handling review, combat mindset, fundamentals of combat marksmanship, M4A1 carbine zero confirmation & co-witnessing, line of sight – bore centerline deviation, four-step draw of secondary, search and assessment techniques, transitioning from primary to secondary, retention, reloading techniques, malfunctions, stoppages and immediate/remedial actions, tactical firing positions, multiple target engagement techniques, multiple targets at adverse angles, pivot drills, and low light and near low light firing techniques.

5. Advanced pistol and carbine

8.A. Instructor to student ratio of 1:5 to provide combined assessment and performance evaluated courses of fire to sustain and enhance the requisite levels of knowledge, understanding and basic-advanced urban combat marksmanship skills.

8.B. Advanced urban combat marksmanship instructors to assess, develop, sustain, and enhance intermediate – advanced performance levels to ensure demonstrated abilities of attending personnel are capable of successfully completing the M4A1 / M45 Modified Qualifications (Mod Qual) courses of fire

IAW the performance objectives as listed below:

8.C. Performance objectives include: weapons safety and manipulations / weapons handling review, advanced urban combat marksmanship, reloading techniques (single hand manipulations inclusive), pistol stoppage immediate/remedial actions (single hand manipulations inclusive), carbine malfunctions, stoppages and immediate/remedial actions (hard pull, brass/round over bolt inclusive), rapid aimed firing techniques / recoil management, refine and enhance shooting on the move skills (assault, laterals, obloquies and retrogrades), tactical use of cover and barricades (high & low), known and unknown distance marksmanship applications from ground level and elevated positions, target discrimination techniques, and stress shoots.

6. Urban combat tactics training

9.A. CQC tactics SMEs/instructors capable of providing recent/relevant instruction in the following subject areas:

9.B. Training objectives to include: establishment of the final assault point, pre-assault preparations, tactical movement to entry point, actions at the entry point, single / double stack and six-man tactics/procedures, courtyard entries to indigenous compounds, mechanical, ballistic and interior / exterior explosive breaching procedures, clearing procedures, door procedures, bang procedures, establishment and maintenance of the marshalling area, threat, non-threat and unknown processing, marking procedures, large room procedures, hallway procedures, hallway intersection procedures, landing procedures, interior stack / hold & flow direction, last room procedures, immediate / emergency assaults, down shooter procedures, consolidation & evacuation preparations, Unknown / Tango / Shooter (UTS) report, evacuation procedures, mass casualty procedures, mass extraction of unknowns, rural/urban movement techniques, and reception area / debriefing cycle.

7. STX

10.A. Contractor shall provide SMEs / Instructors in sufficient quantity to effectively design, monitor, assess and evaluate the fully integrated operational scenarios of the force being trained for all aspects of the

STX.

10.B. STX training objectives shall include at a minimum: Rapid Response Planning Process (R2P2) planning inputs, actions in the marshalling area and element launches, movements to target areas, actions in the objective area and on the objective, exploitation of target sites, evacuation & exfiltration, actions on reception and debrief, live-fire and force-on-force simulated munitions exercises.

Government provided:

1. Unit-specific items of equipment will be provided by the unit per their organizational Table of Equipment, i.e.;

3d Reconnaissance Battalion issued load-out items.

2. Individual and team uniforms and equipment per SOPs and Table of Equipment (T/E) (night vision, body armor/assault vests, optics, etc.)

3. M4A1 / M27 Carbine, M45 .45cal Pistol per student

4. SESAMS Conversion Kits for carbine and pistol per student

5. All tactical breaching shotguns

6. AA40 (CTG, 5.56MM JACKETED FRANGIBLE): 40,000 rounds

7. AA54 (CTG, 12 GAGE BREACHING M1030): 100 rounds

8. A059 (CTG, 5.56MM BALL): 120,000 rounds

9. A475 (CTG, .45 CAL BALL): 32,500 rounds

10. AA11 (CTG, 7.62MM NATO SPEC BALL M118 SNGL RD): 100 rounds

11. AA12 (CTG, 9MM FX MKG RED): 5000 rounds

12. AA21 (CTG, 9MM FX MKG BLUE): 5000 rounds

13. AX14 (PRIMER, PERCUSSION, 12 GAUGE): 100 count

14. GG20 (GRENADE, HAND STUN): 400 count

15. G940 (GRENADE, HAND, GREEN SMOKE): 10 count

16. G945 (GRENADE, HAND, YELLOW SMOKE): 10 count

17. G955 (GRENADE, HAND, VIOLET SMOKE): 10 count

18. G982 (GRENADE, HAND, SMOKE, TA): 20 count

19. M456 (CORD, DETONATING PETN, 50 GR): 500 feet

20. M980 (CHARGE, DEMO SHEET ROLL 38FT PETN NEW/FT): 38 feet

21. MM30 (CHARGE, FLEXIBLE 20 GRAM PETN MK140): 50 feet

22. MN08 (IGNITER, TIME BLASTING FUZE, M81): 50 count

23. MM52 (DETONATOR, NON-ELECTRIC MK123 MOD 0): 100 count

24. All interior & exterior explosive breaching expendables, components, priming & initiation systems

25. All communications equipment Items, GPS & specialty NavAid electronics

26. Mechanical breaching tools to include Haligans, sledges, Broco Torches & Quickie Saws

27. All replacement Quickie Saw blades

28. All replacement Broco cutting rods, rod igniters, fuel & O2 canister replenishment

29. Transportation of personnel and things to the awarded contractor’s training complex

30. One Hundred Eighty (180) Meals Ready to Eat (MREs) for STX

Curriculum:

1. TCCC/USDAAT

2. Basic pistol and carbine

3. Advanced pistol and carbine

4. Urban combat tactics training

5. STX

Security:

1. Billeting and non-serialized gear storage areas must be lockable and offer reasonable protection from theft and pilferage.

2. Contractor’s facility will possess DoD-compliant arms, ammunition storage rooms, magazines and bunkers IAW

DoD 5100.76-M (Physical Security Manual).

Place of Performance:

Southern Continental US.

Specific requirements:

1. Contractor shall be located no more than 700 miles, in a straight line, from Austin, TX.

Period of Performance: 6 - 30 APR 18

CLAUSES INCORPORATED BY REFERENCE

52.203-3 Gratuities APR 1984

52.203-5 Covenant Against Contingent Fees MAY 2014

52.203-16 Preventing Personal Conflicts of Interest DEC 2011

52.204-4 Printed or Copied Double-Sided on Postconsumer Fiber

Content Paper

MAY 2011

52.204-7 System for Award Management OCT 2016

52.204-9 Personal Identity Verification of Contractor Personnel JAN 2011

52.204-13 System for Award Management Maintenance OCT 2016

52.204-16 Commercial and Government Entity Code Reporting JUL 2016

52.204-17 Ownership or Control of Offeror JUL 2016

52.204-18 Commercial and Government Entity Code Maintenance JUL 2016

52.204-19 Incorporation by Reference of Representations and

Certifications.

DEC 2014

52.204-20 Predecessor of Offeror JUL 2016

52.209-2 Prohibition on Contracting with Inverted Domestic

Corporations--Representation

NOV 2015

52.209-7 Information Regarding Responsibility Matters JUL 2013

52.209-11 Representation by Corporations Regarding Delinquent Tax

Liability or a Felony Conviction under any Federal Law

FEB 2016

52.209-11 Representation by Corporations Regarding Delinquent Tax

Liability or a Felony Conviction under any Federal Law

FEB 2016

52.212-1 Instructions to Offerors--Commercial Items JAN 2017

52.212-2 Evaluation - Commercial Items OCT 2014

52.212-3 Offeror Representations and Certifications--Commercial

Items

NOV 2017

52.212-4 Contract Terms and Conditions--Commercial Items JAN 2017

52.225-25 Prohibition on Contracting with Entities Engaging in Certain

Activities or Transactions Relating to Iran-- Representation and Certifications.

OCT 2015

52.232-40 Providing Accelerated Payments to Small Business

Subcontractors

DEC 2013

52.233-2 Service Of Protest SEP 2006

52.242-13 Bankruptcy JUL 1995

252.201-7000 Contracting Officer's Representative DEC 1991

252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights SEP 2013

252.203-7005 Representation Relating to Compensation of Former DoD

Officials

NOV 2011

252.204-7004 Alt A System for Award Management Alternate A FEB 2014

252.205-7000 Provision Of Information To Cooperative Agreement Holders DEC 1991

252.209-7004 Subcontracting With Firms That Are Owned or Controlled By

The Government of a Country that is a State Sponsor of

Terrorism

OCT 2015

252.215-7007 Notice of Intent to Resolicit JUN 2012

252.215-7008 Only One Offer OCT 2013

252.222-7007 Representation Regarding Combating Trafficking in Persons JAN 2015

252.225-7048 Export-Controlled Items JUN 2013

252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

JUN 2012

252.232-7010 Levies on Contract Payments DEC 2006

252.243-7002 Requests for Equitable Adjustment DEC 2012

252.244-7000 Subcontracts for Commercial Items JUN 2013

CLAUSES INCORPORATED BY FULL TEXT

Addendum to 52.212-2 Evaluation -- Commercial Items (Oct 2014)

(a)This is a commercial item requirement using Simplified Acquisition Procedures under FAR part 12 and 13, respectively. Evaluation will be conducted using simplified procedures in accordance with FAR 13.106.

(b)The Government will award to the responsible offeror whose quote, conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate quotes:

1) Quality/technical merit

2) Price

3) Past Performance

c) For purposes of evaluation and determination of responsibility, and in accordance with FAR 13.106-2(b)(3), this assessment will primarily be conducted through Federal Awardee Performance and Integrity Information System

(FAPIIS) / Past Performance Information Retrieval System (PPIRS), but may include other authorized methods described. Past performance, for purposes of this evaluation, will be assessed as ‘satisfactory’ or ‘unsatisfactory’ at the discretion of the contracting officer based on the totality of information available. A past performance determination of ‘unsatisfactory’ will exclude the offer from consideration for award.

d) Solicitations for supplies valued less than $1 million will, alternatively, use the past performance evaluation procedures outlined in DFARS 213.106-2 and described in clause 252.213-7000, incorporated herein.

(e) A written notice of award or acceptance of a quote, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the quote, shall result in a binding contract without further action by either party. Before the offer’s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR

EXECUTIVE ORDERS--COMMERCIAL ITEMS (NOV 2017)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017)

(section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L.

113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(3) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(4) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 (19

U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.)

X (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41

U.S.C. 4704 and 10 U.S.C. 2402).

____ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).

____ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (June

2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment

Act of 2009.)

X (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2016) (Pub. L. 109-

282) (31 U.S.C. 6101 note).

___ (5) [Reserved]

___ (6) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div.

C).

___ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub.

L. 111-117, section 743 of Div. C).

X (8) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Oct 2015) (31 U.S.C. 6101 note).

____ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (July 2013) (41

U.S.C. 2313).

____ (10) [Reserved]

____ (11)(i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (NOV 2011) (15 U.S.C. 657a).

____ (ii) Alternate I (NOV 2011) of 52.219-3.

____ (12) (i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (OCT 2014)

(if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

____ (ii) Alternate I (JAN 2011) of 52.219-4.

____ (13) [Reserved]

____ (14)(i) 52.219-6, Notice of Total Small Business Set-Aside (NOV 2011) (15 U.S.C. 644).

____ (ii) Alternate I (NOV 2011).

____ (iii) Alternate II (NOV 2011).

____ (15)(i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644).

____ (ii) Alternate I (Oct 1995) of 52.219-7.

____ (iii) Alternate II (Mar 2004) of 52.219-7.

____ (16) 52.219-8, Utilization of Small Business Concerns (Nov 2016) (15 U.S.C. 637(d)(2) and (3)).

____ (17)(i) 52.219-9, Small Business Subcontracting Plan (Jan 2017) (15 U.S.C. 637(d)(4)).

____ (ii) Alternate I (Nov 2016) of 52.219-9.

____ (iii) Alternate II (Nov 2016) of 52.219-9.

____ (iv) Alternate III (Nov 2016) of 52.219-9.

____ (v) Alternate IV (Nov 2016) of 52.219-9.

____ (18) 52.219-13, Notice of Set-Aside of Orders (NOV 2011) (15 U.S.C. 644(r)).

X (19) 52.219-14, Limitations on Subcontracting (JAN 2017) (15 U.S.C. 637(a)(14)).

____ (20) 52.219-16, Liquidated Damages—Subcon-tracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)).

____ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (NOV 2011) (15 U.S.C.

657f).

____ (22) 52.219-28, Post Award Small Business Program Rerepresentation (July 2013) (15 U.S.C. 632(a)(2)).

____ (23) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged Women-

Owned Small Business Concerns (Dec 2015) (15 U.S.C. 637(m)).

____(24) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business Concerns

Eligible Under the Women-Owned Small Business Program (Dec 2015) (15 U.S.C. 637(m)).

X (25) 52.222-3, Convict Labor (June 2003) (E.O. 11755).

X (26) 52.222-19, Child Labor--Cooperation with Authorities and Remedies (Oct 2016) (E.O. 13126).

X (27) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

X (28) 52.222-26, Equal Opportunity (Sept 2016) (E.O. 11246).

____ (29) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212).

____ (30) 52.222-36, Equal Opportunity for Workers with Disabilities (July 2014) (29 U.S.C. 793).

____ (31) 52.222-37, Employment Reports on Veterans (FEB 2016) (38 U.S.C. 4212).

____ (32) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O.

13496).

X (33)(i) 52.222-50, Combating Trafficking in Persons (March 2, 2015) (22 U.S.C. chapter 78 and E.O. 13627).

____ (ii) Alternate I (March 2, 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

____ (34) 52.222-54, Employment Eligibility Verification (Oct 2015). (E. O. 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in

22.1803.)

____ (35)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (May

2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

____ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

____ (36) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (June, 2016) (E.O. 13693).

____ (37) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners

(June, 2016) (E.O. 13693).

____ (38) (i) 52.223-13, Acquisition of EPEAT® Registered Imaging Equipment (Jun 2014) (E.O.s 13423 and

13514).

____ (ii) Alternate I (OCT 2015) of 52.223-13.

____ (39)(i) 52.223-14, Acquisition of EPEAT® Registered Televisions (Jun 2014) (E.O.s 13423 and 13514).

____ (ii) Alternate I (Jun 2014) of 52.223-14.

____ (40) 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42 U.S.C. 8259b).

____ (41)(i) 52.223-16, Acquisition of EPEAT[supreg]-Registered Personal Computer Products (OCT 2015) (E.O.s

13423 and 13514).

____ (ii) Alternate I (Jun 2014) of 52.223-16.

____ (42) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011) (E.O.

13513).

____ (43) 52.223-20, Aerosols (June, 2016) (E.O. 13693).

____ (44) 52.223-21, Foams (June, 2016) (E.O. 13693).

____ (45)(i) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a).

____ (ii) Alternate I (JAN 2017) of 52.224-3.

____ (46) 52.225-1, Buy American--Supplies (May 2014) (41 U.S.C. chapter 83).

____ (47) (i) 52.225-3, Buy American--Free Trade Agreements--Israeli Trade Act (May 2014) (41 U.S.C. chapter

83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L.

103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

____ (ii) Alternate I (May 2014) of 52.225-3.

____ (iii) Alternate II (May 2014) of 52.225-3.

____ (iv) Alternate III (May 2014) of 52.225-3.

____ (48) 52.225-5, Trade Agreements (Oct 2016) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

____ (49) 52.225-13, Restrictions on Certain Foreign Purchases (June 2008) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

____ (50) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016)

(Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

____ (51) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150

____ (52) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C.

5150).

____ (53) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 4505, 10

U.S.C. 2307(f)).

____ (54) 52.232-30, Installment Payments for Commercial Items (Jan 2017) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).

____ (55) 52.232-33, Payment by Electronic Funds Transfer—System for Award Management (July 2013) (31

U.S.C. 3332).

____ (56) 52.232-34, Payment by Electronic Funds Transfer—Other than System for Award Management (July

2013) (31 U.S.C. 3332).

____ (57) 52.232-36, Payment by Third Party (MAY 2014) (31 U.S.C. 3332).

____ (58) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).

____ (59) 52.242-5, Payments to Small Business Subcontractors (JAN 2017)(15 U.S.C. 637(d)(12)).

____ (60)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C.

Appx. 1241(b) and 10 U.S.C. 2631).

____ (ii) Alternate I (Apr 2003) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.)

_____(1) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495).

_____ (2) 52.222-41, Service Contract Labor Standards (MAY 2014) (41 U.S.C. chapter 67).

_____ (3) 52.222-42, Statement of Equivalent Rates for Federal Hires (MAY 2014) (29 U.S.C. 206 and 41 U.S.C.

chapter 67).

_____ (4) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (Multiple

Year and Option Contracts) (MAY 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

_____ (5) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (MAY

2014) (29 U.S.C 206 and 41 U.S.C. chapter 67).

_____ (6) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for

Maintenance, Calibration, or Repair of Certain Equipment--Requirements (MAY 2014) (41 U.S.C. chapter 67).

_____ (7) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain

Services--Requirements (MAY 2014) (41 U.S.C. chapter 67).

_____(8) 52.222-55, Minimum Wages Under Executive Order 13658 (DEC 2015) (E.O. 13658).

_____ (9) 52.222-62, Paid Sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706).

_____ (10) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (MAY 2014) (42 U.S.C. 1792).

_____ (11) 52.237-11, Accepting and Dispensing of $1 Coin (Sept 2008) (31 U.S.C. 5112(p)(1)).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph

(d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records--Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the

Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1)in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause—

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).

(ii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017)

(section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L.

113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iii) 52.219-8, Utilization of Small Business Concerns (Nov 2016) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $700,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(iv) 52.222-17, Nondisplacement of Qualified Workers (MAY 2014) (E.O. 13495). Flow down required in accordance with paragraph (l) of FAR clause 52.222-17.

(v) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

(vi) 52.222-26, Equal Opportunity (Sept 2016) (E.O. 11246).

(vii) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212).

(viii) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).

(ix) 52.222-37, Employment Reports on Veterans (Feb 2016) (38 U.S.C. 4212).

(x) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).

Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(xi) 52.222-41, Service Contract Labor Standards (May 2014), (41 U.S.C. chapter 67).

(xii) _____ (A) 52.222-50, Combating Trafficking in Persons (March 2, 2015) (22 U.S.C. chapter 78 and E.O.

13627).

_____ (B) Alternate I (March 2, 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

(xiii) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for

Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May 2014) (41 U.S.C. chapter 67.)

(xvii) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain

Services--Requirements (May 2014) (41 U.S.C. chapter 67)

(xiv) 52.222-54, Employment Eligibility Verification (Oct 2015) (E. O. 12989).

(xv)52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015) (E.O. 13658).

(xvi) (A) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a).

(B) Alternate I (JAN 2017) of 52.224-3.

(xvii) 52.222-62 Paid Sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706).

(xviii) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section

862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

(xix) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xx) 52.247-64, Preference for Privately-Owned U.S. Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx

1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the Contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.

(End of clause)

52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998)

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es):

http://farsite.hill.af.mil/

(End of provision)

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

252.204-7011 ALTERNATIVE LINE-ITEM STRUCTURE (SEP 2011)

(a) Line items are the basic structural elements in a solicitation or contract that provide for the organization of contract requirements to facilitate pricing, delivery, inspection, acceptance and payment. Line items are organized into contract line items, subline items, and exhibit line items. Separate line items should be established to account for separate pricing, identification (see section 211.274 of the Defense Federal

Acquisition Regulation Supplement), deliveries, or funding. The Government recognizes that the line item structure in this solicitation may not conform to every offeror's practices. Failure to correct these issues can result in difficulties in accounting for deliveries and processing payments. Therefore, offerors are invited to propose an alternative line item structure for items on which bids, proposals, or quotes are requested in this solicitation to ensure that the resulting contract structure is economically and administratively advantageous to the Government and the Contractor.

(b) If an alternative line item structure is proposed, the structure must be consistent with subpart 204.71 of the

Defense Federal Acquisition Regulation Supplement and PGI 204.71. A sample solicitation line-item structure and a corresponding offer of a proposed alternative line-item structure follow.

Solicitation:

Item No. Supplies/Service Quantity Unit Unit price Amount

0001............................ Computer, Desktop with 20 EA

CPU, Monitor, Keyboard and Mouse.

Alternative line-item structure offer where monitors are shipped separately:

Item No. Supplies/Service Quantity Unit Unit Price Amount

0001............................ Computer, Desktop with 20 EA

CPU, Keyboard and Mouse.

0002............................ Monitor................. 20 EA

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013)

(a) Definitions. As used in this clause--

Department of Defense Activity Address Code (DoDAAC) is a six position code that uniquely identifies a unit, activity, or organization.

Document type means the type of payment request or receiving report available for creation in Wide Area

WorkFlow (WAWF).

Local processing office (LPO) is the office responsible for payment certification when payment certification is done external to the entitlement system.

(b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall--

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training

Course and use the Practice Training Site before submitting payment requests through

WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/.

(e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data

Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:

(1) Document type. The Contractor shall use the following document type(s).

2-in-1

(Contracting Officer: Insert applicable document type(s). Note: If a “Combo” document type is identified but not supportable by the Contractor's business systems, an “Invoice” (stand-alone) and

“Receiving Report” (stand-alone) document type may be used instead.)

(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in

WAWF, as specified by the contracting officer.

Japan

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC M13011

Issue By DoDAAC M67400

Admin DoDAAC M67400

Inspect By DoDAAC ____

Ship To Code ____

Ship From Code ____

Mark For Code ____

Service Approver (DoDAAC) ____

Service Acceptor (DoDAAC) M13011

Accept at Other DoDAAC ____

LPO DoDAAC ____

DCAA Auditor DoDAAC ____

Other DoDAAC(s) ____

(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request.

(5) WAWF email notifications. The Contractor shall enter the email address identified below in the “Send

Additional Email Notifications” field of WAWF once a document is submitted in the system.

benjamin.skarzynski@usmc.mil marcus.schnars@usmc.mil harold.teague@usmc.mil

(g) WAWF point of contact. (1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

mcbb_g4_rco_wawf@usmc.mil

(2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988.

mailto:benjamin.skarzynski@usmc.mil mailto:marcus.schnars@usmc.mil mailto:harold.teague@usmc.mil mailto:mcbb_g4_rco_wawf@usmc.mil

52.212-1 ADDENDUM TO INSTRUCTIONS TO OFFERORS--COMMERCIAL ITEMS (OCT 2015)

The provision at 52.212-1, incorporated by reference, applies with the following changes/additions:

(a) North American Industry Classification System (NAICS) code and small business size standard.

Non-U.S. business concerns of any size are not qualifying entities.

(b) SUBMISSION OF QUOTES:

Submit signed and dated quotes to the office specified in this Request for Quotes (RFQ), or by email or fax using the specified contact information in section (n) below, at or before the exact time specified in block 8 of this RFQ.

Quotes may be submitted electronically (emailed); however, due to government computer firewall security and file size limitations, please be advised that it is the prospective contractor’s responsibility to ensure that the

Contracting Office receives all required documents by the due date/time, including acknowledgment of receipt from the Government.

QUOTES MUST BE SUBMITTED AS INDICATED:

(1) Completed SF1449/SF30. All Pricing and other required information, including:

SF1449

(a) Block 5, The Request for Quote number;

(b) Block 8, The time specified in the Request for Quotes for receipt of quotes;

(c) Block 17a complete, including the name, address, and telephone number of the offeror;

(d) Block 17b if appropriate, "Remit to" address, if different than mailing address;

(e) Unit Price and extended Price for each Contract Line Item Number (CLIN) / sub-CLIN

(f) Block 26, Total Price Quote

(g) Block 12, Discount Terms [provide amplifying information if necessary]

SF30 (if applicable)

(h) SF30 block 15a,b,c; and Acknowledgment of Request for Quotes Amendments, if applicable

(2) Service approach

(a) Description of support facilities for the provided training.

(b) The Offeror shall provide minimum qualifications, certifications, experience, and

Specialized experience that the individuals will possess for each of the support areas identified in the PWS.

(3) Validation of Representations and Certifications

a. Reps/certs completed electronically and registered as current via SAM per 52.212-3 need not be re-submitted. However, the following information MUST be provided with this quotation. Submitting the information affirms that the offeror is registered and current in the SAM database:

Commer…