D M6700124Q1025.pdf

SEE ADDENDUM

(No Collect Calls)

M6700124Q1025 24-Jan-2024

b. TELEPHONE NUMBER

252-466-2844

8. OFFER DUE DATE/LOCAL TIME

04:00 PM 31 Jan 2024

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA X ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

M670019. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

JEFFREY G. PENNY

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

1 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.X

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

M301464451449

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED ORX

SMALL BUSINESS

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

M67001 MARINE CORPS FIELD CONTRACTING SY

ATTN: JEFFREY G. PENNY

PSC BOX 8018

MARINE CORPS AIR STATION

CHERRY POINT NC 28533

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE M30146 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

M30146

KURT AVELLAR

ENVIRONMENTAL AFFAIRS DEPARTMENT (EAD)

BLDG 4223 ACCESS RD

CHERRY POINT NC 28533

TEL: 252-466-3117 FAX:

FAX:

TEL: 252-466-2844 SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

$40,000,000

NAICS:

532490

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT 41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

M6700124Q1025

Section SF 1449 - CONTINUATION SHEET

OPTIONS SUMMARY

PURPOSE: The purpose of this action is to establish a contract for the Leasing of Contractor Owned and Maintenance of Contractor/Government owned Part Washers aboard MCAS, Cherry Point, NC. All services shall be provided in accordance with the Performance Work Statement.

TERM OF CONTRACT: The contractor shall provide the services specified herein for a base period of twelve (12) months commencing at date of award with provisions for two (2) twelve (12) month option periods. The option period may be exercised at the discretion of the Government in accordance with FAR 52.217-9 “Option to Extend the Term of the Contract” (MAR 2000).

PERIODS OF PERFORMANCE AND VALUE. The periods of performance and dollar values for each are as follows:

BASE PERIOD CLIN 0001 through CLIN 0015 $ 12 months ADC

FIRST OPTION CLIN 1001 through CLIN 1015 $ 12 months ADC

SECOND OPTION CLIN 2001 through CLIN 2015 $ 12 months ADC

*TOTAL VALUE *$

* To be provided at award*

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 12 Months Lease of Part Washer

FFP

To include but not limited to all guidelines listed in the Performance Work Statement.

Brand Name or Equal Mfg: Safety Kleen Model 250 30 GL DSPW Quantity: 2 machines (1 Per Building) Location: Bldg 157 West, Bldg 157 East

FOB: Destination

MILSTRIP: M301464451449

PURCHASE REQUEST NUMBER: M301464451449

PSC CD: J079

NET AMT

0002 12 Months Lease of Part Washer

FFP

To include but not limited to all guidelines listed in the Performance Work Statement.

Brand Name or Equal Mfg: Safety Kleen Model 26 Quantity: 2 machines (1 Per Building) Location: Bldg 157 (Heavy Motor Transportation tool room), Bldg 160 (Motor Transportation West)

FOB: Destination

MILSTRIP: M301464451449

0003 12 Months Lease of Part Washer

FFP

To include but not limited to all guidelines listed in the Performance Work Statement.

Brand Name or Equal Mfg: Safety Kleen Model 30 Quantity: 9 machines (1 Per Building) Location: Bldgs 160 East, 160 West, 93, 1018, 4419, 9062, 85, 244, 4576, 0004 12 Months Lease of Part Washer

FFP

To include but not limited to all guidelines listed in the Performance Work Statement.

Brand Name or Equal Mfg: Safety Kleen Model 1077 Quantity: 1 machine (1 Per Building) Location: Bldg 4007 (Motor Transportation Paint Shop)

0005 6 Calls Maintenance of Part Washer

FFP

To include but not limited to all guidelines listed in the Performance Work Statement.

Brand Name or Equal Mfg: Safety Kleen Model 250 30 GL DSPW Quantity: 2 machines (1 Per Building) Location: Bldg 157 West, Bldg 157 East 3 services per machine

0006 6 Calls Maintenance of Part Washer

FFP

To include but not limited to all guidelines listed in the Performance Work Statement.

Brand Name or Equal Mfg: Safety Kleen Model 26 Quantity: 2 machine (1 Per Building) Location: Bldg 157 (Heavy Motor Transportation tool room), Bldg 160 (Motor

4 services per machine

0007 24 Calls Maintenance of Part Washer

FFP

To include but not limited to all guidelines listed in the Performance Work Statement.

Brand Name or Equal Model 30 Quantity: 2 machines (1 Per Building) Location: Bldg 160 East, Bldg 160 West 12 services per machine

0008 30 Calls Maintenance of Part Washer

FFP

To include but not limited to all guidelines listed in the Performance Work Statement.

Brand Name or Equal Model 30 Quantity: 5 machines (1 Per Building) Location: Bldgs 93 (Public Works-WC70), 1018 (Navy Boat Docks), 4419

(MWSS-271 CFR), 9062 (BT-11), 85 (B85-WC45)

6 services per machine

FOB: Destination

MILSTRIP: M301464451449

0009 8 Calls Maintenance of Part Washer

FFP

To include but not limited to all guidelines listed in the Performance Work Statement.

Brand Name or Equal Model 30 Quantity: 2 machines (1 Per Building) Location: Bldgs 244 (CNATT-RQ21 Lab), 4576 (Motor Transportation fuelers) 4 services per machine

FOB: Destination

MILSTRIP: M301464451449

0010 12 Calls Maintenance of Part Washer

FFP

To include but not limited to all guidelines listed in the Performance Work Statement.

Brand Name or Equal Mfg: Safety Kleen Model 1077 Quantity: 1 machine

12 services

0011 12 Calls Maintenance of Part Washer

FFP

To include but not limited to all guidelines listed in the Performance Work Statement.

Government Owned Mfg: Gary Mills Model: Sink; Aqeuous Parts Washer Quantity: 3 machines Location: Bldg 4007 (Motor Transportation Paint Shop) 4 services per machine

FOB: Destination

0012 8 Calls Maintenance of Part Washer

FFP

To include but not limited to all guidelines listed in the Performance Work Statement.

Government Owned Mfg: Clean-O-Matic Model: 500-A Quantity: 2 machines (1 Per Building) Location: Bldg 1667N (VMA-223), 1665N (VMA-231) 4 services per machine

FOB: Destination

MILSTRIP: M301464451449

0013 8 Calls Maintenance of Part Washer

FFP

To include but not limited to all guidelines listed in the Performance Work Statement.

Government Owned Mfg: Smart Washer Model: 28-1 Quantity: 2 machines (1 Per Building) Location: Bldg 3916 (MALS-14 ORD), 1229 (MALS-14 ORD) 4 services per machine

FOB: Destination

MILSTRIP: M301464451449

0014 4 Calls Maintenance of Part Washer

FFP

To include but not limited to all guidelines listed in the Performance Work Statement.

Government Owned Mfg: RAMCO Model: MK24CMS Quantity: 1 machine Location: Bldg 4075 (MALS-14 GSE) 4 services

FOB: Destination

MILSTRIP: M301464451449

0015 4 Calls Maintenance of Part Washer

FFP

To include but not limited to all guidelines listed in the Performance Work Statement.

Government Owned Mfg: Clarus Model: Solvents Part Washer Quantity: 1 machine Location: Bldg 3992 (MALS-14 Van Pad) 4 services

FOB: Destination

MILSTRIP: M301464451449

1001 12 Months OPTION Lease of Part Washer

FFP

To include but not limited to all guidelines listed in the Performance Work Statement.

Brand Name or Equal Mfg: Safety Kleen Model 250 30 GL DSPW Quantity: 2 machines (1 Per Building) Location: Bldg 157 West, Bldg 157 East

1002 12 Months OPTION Lease of Part Washer

FFP

To include but not limited to all guidelines listed in the Performance Work Statement.

Brand Name or Equal Mfg: Safety Kleen Model 26 Quantity: 2 machines (1 Per Building)

1003 12 Months OPTION Lease of Part Washer

FFP

To include but not limited to all guidelines listed in the Performance Work Statement.

Brand Name or Equal Mfg: Safety Kleen Model 30

1004 12 Months OPTION Lease of Part Washer

FFP

To include but not limited to all guidelines listed in the Performance Work Statement.

Brand Name or Equal Mfg: Safety Kleen Model 1077

1005 6 Calls OPTION Maintenance of Part Washer

FFP

To include but not limited to all guidelines listed in the Performance Work Statement.

Brand Name or Equal Mfg: Safety Kleen Model 250 30 GL DSPW Quantity: 2 machines (1 Per Building)

1006 6 Calls OPTION Maintenance of Part Washer

FFP

To include but not limited to all guidelines listed in the Performance Work Statement.

Brand Name or Equal Mfg: Safety Kleen Model 26 Quantity: 2 machine (1 Per Building) Location: Bldg 157 (Heavy Motor Transportation tool room), Bldg 160 (Motor

1007 24 Calls OPTION Maintenance of Part Washer

FFP

To include but not limited to all guidelines listed in the Performance Work Statement.

Brand Name or Equal Model 30 Quantity: 2 machines (1 Per Building) Location: Bldg 160 East, Bldg 160 West

1008 30 Calls OPTION Maintenance of Part Washer

FFP

To include but not limited to all guidelines listed in the Performance Work Statement.

Brand Name or Equal Model 30 Quantity: 5 machines (1 Per Building) Location: Bldgs 93 (Public Works-WC70), 1018 (Navy Boat Docks), 4419

(MWSS-271 CFR), 9062 (BT-11), 85 (B85-WC45)

6 services per machine

1009 8 Calls OPTION Maintenance of Part Washer

FFP

To include but not limited to all guidelines listed in the Performance Work Statement.

Brand Name or Equal Model 30 Quantity: 2 machines (1 Per Building) Location: Bldgs 244 (CNATT-RQ21 Lab), 4576 (Motor Transportation fuelers) 4 services per machine

1010 12 Calls OPTION Maintenance of Part Washer

FFP

To include but not limited to all guidelines listed in the Performance Work Statement.

Brand Name or Equal Mfg: Safety Kleen Model 1077 Quantity: 1 machine

1011 12 Calls OPTION Maintenance of Part Washer

FFP

To include but not limited to all guidelines listed in the Performance Work Statement.

Government Owned Mfg: Gary Mills Model: Sink; Aqeuous Parts Washer Quantity: 3 machines Location: Bldg 4007 (Motor Transportation Paint Shop)

1012 8 Calls OPTION Maintenance of Part Washer

FFP

To include but not limited to all guidelines listed in the Performance Work Statement.

Government Owned Mfg: Clean-O-Matic Model: 500-A Quantity: 2 machines (1 Per Building) Location: Bldg 1667N (VMA-223), 1665N (VMA-231) 4 services per machine

1013 8 Calls OPTION Maintenance of Part Washer

FFP

To include but not limited to all guidelines listed in the Performance Work Statement.

Government Owned Mfg: Smart Washer Model: 28-1 Quantity: 2 machines (1 Per Building) Location: Bldg 3916 (MALS-14 ORD), 1229 (MALS-14 ORD) 4 services per machine

1014 4 Calls OPTION Maintenance of Part Washer

FFP

To include but not limited to all guidelines listed in the Performance Work Statement.

Government Owned Mfg: RAMCO Model: MK24CMS Quantity: 1 machine Location: Bldg 4075 (MALS-14 GSE) 4 services

1015 4 Calls OPTION Maintenance of Part Washer

FFP

To include but not limited to all guidelines listed in the Performance Work Statement.

Government Owned Mfg: Clarus Model: Solvents Part Washer Quantity: 1 machine Location: Bldg 3992 (MALS-14 Van Pad) 4 services

2001 12 Months OPTION Lease of Part Washer

FFP

To include but not limited to all guidelines listed in the Performance Work Statement.

Brand Name or Equal Mfg: Safety Kleen Model 250 30 GL DSPW Quantity: 2 machines (1 Per Building) Location: Bldg 157 West, Bldg 157 East

2002 12 Months OPTION Lease of Part Washer

FFP

To include but not limited to all guidelines listed in the Performance Work Statement.

Brand Name or Equal Mfg: Safety Kleen Model 26 Quantity: 2 machines (1 Per Building)

2003 12 Months OPTION Lease of Part Washer

FFP

To include but not limited to all guidelines listed in the Performance Work Statement.

Brand Name or Equal Mfg: Safety Kleen Model 30

2004 12 Months OPTION Lease of Part Washer

FFP

To include but not limited to all guidelines listed in the Performance Work Statement.

Brand Name or Equal Mfg: Safety Kleen Model 1077

2005 6 Calls OPTION Maintenance of Part Washer

FFP

To include but not limited to all guidelines listed in the Performance Work Statement.

Brand Name or Equal Mfg: Safety Kleen Model 250 30 GL DSPW Quantity: 2 machines (1 Per Building)

2006 6 Calls OPTION Maintenance of Part Washer

FFP

To include but not limited to all guidelines listed in the Performance Work Statement.

Brand Name or Equal Mfg: Safety Kleen Model 26 Quantity: 2 machine (1 Per Building) Location: Bldg 157 (Heavy Motor Transportation tool room), Bldg 160 (Motor

2007 24 Calls OPTION Maintenance of Part Washer

FFP

To include but not limited to all guidelines listed in the Performance Work Statement.

Brand Name or Equal Model 30 Quantity: 2 machines (1 Per Building) Location: Bldg 160 East, Bldg 160 West

2008 30 Calls OPTION Maintenance of Part Washer

FFP

To include but not limited to all guidelines listed in the Performance Work Statement.

Brand Name or Equal Model 30 Quantity: 5 machines (1 Per Building) Location: Bldgs 93 (Public Works-WC70), 1018 (Navy Boat Docks), 4419

(MWSS-271 CFR), 9062 (BT-11), 85 (B85-WC45)

6 services per machine

2009 8 Calls OPTION Maintenance of Part Washer

FFP

To include but not limited to all guidelines listed in the Performance Work Statement.

Brand Name or Equal Model 30 Quantity: 2 machines (1 Per Building) Location: Bldgs 244 (CNATT-RQ21 Lab), 4576 (Motor Transportation fuelers) 4 services per machine

2010 12 Calls OPTION Maintenance of Part Washer

FFP

To include but not limited to all guidelines listed in the Performance Work Statement.

Brand Name or Equal Mfg: Safety Kleen Model 1077 Quantity: 1 machine

2011 12 Calls OPTION Maintenance of Part Washer

FFP

To include but not limited to all guidelines listed in the Performance Work Statement.

Government Owned Mfg: Gary Mills Model: Sink; Aqeuous Parts Washer Quantity: 3 machines Location: Bldg 4007 (Motor Transportation Paint Shop)

2012 8 Calls OPTION Maintenance of Part Washer

FFP

To include but not limited to all guidelines listed in the Performance Work Statement.

Government Owned Mfg: Clean-O-Matic Model: 500-A Quantity: 2 machines (1 Per Building) Location: Bldg 1667N (VMA-223), 1665N (VMA-231) 4 services per machine

2013 8 Calls OPTION Maintenance of Part Washer

FFP

To include but not limited to all guidelines listed in the Performance Work Statement.

Government Owned Mfg: Smart Washer Model: 28-1 Quantity: 2 machines (1 Per Building) Location: Bldg 3916 (MALS-14 ORD), 1229 (MALS-14 ORD) 4 services per machine

2014 4 Calls OPTION Maintenance of Part Washer

FFP

To include but not limited to all guidelines listed in the Performance Work Statement.

Government Owned Mfg: RAMCO Model: MK24CMS Quantity: 1 machine Location: Bldg 4075 (MALS-14 GSE) 4 services

2015 4 Calls OPTION Maintenance of Part Washer

FFP

To include but not limited to all guidelines listed in the Performance Work Statement.

Government Owned Mfg: Clarus Model: Solvents Part Washer Quantity: 1 machine Location: Bldg 3992 (MALS-14 Van Pad) 4 services

PERFORMANCE WORK STATEMENT

1.0 REQUIREMENT. This requirement is for the leasing, servicing and on-call maintenance of solvent and nonsolvent parts cleaners, and solvent recycling units, for regional sites located at Marine Corps Air Station (MCAS), Cherry Point, NC. The contractor shall furnish various types of parts cleaners and ancillary services for leased and Government owned equipment. All parts washers shall be located at MCAS Cherry Point, NC. All hazardous and non-hazardous materials shall be disposed of in accordance with as prescribed by current Environmental Protection Agency (EPA), Federal, State and local laws and codes, and other applicable regulations and directives.

1.1 DELIVERY. All pricing shall be FOB Destination. All machines shall be in place no later than 7 working days after contract award date.

1.2 MCAS CHERRY POINT TASKS. The Contractor shall furnish all personnel, management, transportation, materials, parts, supplies, and equipment required to accomplish deliveries and performance as defined in this RFQ.

1.2.1 The price for lease shall include installation, relocation and removal.

1.2.2 The price for service shall include maintenance, repair, cleaning solution, filtration system and/or filters, parts, and supplies.

1.2.3 The service price shall also include the cost of removal/disposal of hazardous and non-hazardous materials.

1.2.4 Equipment to be Leased and Maintenanced:

Manufacturer Model Quantity Location Service Visit Per Year Safety Kleen 250 30 GL DSPW 2 Machines 1 ea. at Buildings 157 West &

157 East 3 services per machine

Safety Kleen 26 2 Machines 1 ea. at Buildings 157 & 160 West

4 services per machine

Safety Kleen 30 2 Machines 1 ea. at Buildings 160 East & 160 West

12 services per machine

Safety Kleen 30 5 Machines 1 ea. at Buildings 93, 1018, 4419, 9062 & 85

6 services per machine

Safety Kleen 30 2 Machines 1 ea. at Buildings 244 & 4576 4 services per machine

Safety Kleen 1077 1 Machine Building 4007 12 services

1.2.5 Government Owned Equipment to be Maintenanced:

Manufacturer Model Quantity Location Service Visit per year Clean-O-Matic 500-A 2 Machines 1 ea. at Buildings 1667N &

1665N 4 services per machine

Smart Washer 28-1 2 Machines 1 ea. at Buildings 3916 & 1229 4 services per machine

Ramco MK24CMS 1 Machine Building 4075 4 services

Clarus Solvents Parts Washer

1 Machine Building 3992 4 services

Gary Mills Sink; Aqueous Part Washer

3 Machines 3 at Building 3992 4 services per machine

1.3 PERSONNEL. MCAS Cherry Point representatives and associated tasks are: EAD Representative oversees the environmental and solvent tank program management for the Cherry Point organizations (e.g. STATION, 2dMAW, MCCS) and their individual component Units and Departments (i.e. military units, civilian departments);

ORGANIZATION Representative (e.g. STATION, 2dMAW, MCCS) oversee invoicing for the various Units; and UNIT/DEPT Representatives are the ultimate end users of the solvent tanks. No Representative (EAD, ORGANIZATION, or UNIT/DEPT) is authorized to direct the Contractor to perform work that deviates from the contract requirements and specifications without written approval of the CONTRACTING OFFICER (see Section 6.0).

1.4. The following documents are included as a part of this performance work statement where applicable. The version in effect on the date the solicitation is issued shall apply.

Regulation Title Paragraph

Executive Order 13101 Greening the Government Through Waste Prevention, Recycling, and Federal Acquisition

15A NCAC 2q.0503 North Carolina Administrative Code (Title V Air Quality Permit)

Superfund Amendments & Reauthorization Act (SARA), Title

III, Section 313

North Carolina Toxic Air Pollutants 2.2.2 2.2.6

40 CFR Part 261 Protection of the Environment – Identification and Listing of Hazardous Waste

2.2.2 2.2.6

49 CFR 178 Transportation – Specifications for Packaging

4.5.1

40 CFR 263 Protection of the Environment – Standards Applicable to Transportation of Hazardous Waste

4.5.1

40 CFR 262 Protection of the Environment – Standards Applicable to Generation of Hazardous Waste

4.5.3

29 CFR 1910 Occupational Safety and Health Administration (OSHA) (General Industry)

9.4

2.0 PARTS CLEANERS.

2.1 Approved machine manufacturers. All parts washers must be manufactured by accredited companies and carry FM or UL certification for use with flammable materials.

2.1.1 Specifications.

2.1.1.1 All Parts Cleaners provided shall have proven technologies for circulating and capturing dirt and debris from parts being cleaned. The method of accomplishing this shall be at the discretion of the manufacturer.

2.1.1.2 All solvent parts cleaners shall have low vapor pressure to control volatile organic compound (VOC) emissions, be non-photo chemically reactive, non-carcinogenic, and have the least number of constituents which would require regulation pursuant to the requirements of the Superfund Amendments and Reauthorization Act, Title III, Section 313; North Carolina Toxic Air Pollutants; and Title III of 1990 Clean Air Act Amendments, 40 CFR Part 261.

2.1.1.3 All parts cleaners shall also have an adjustable light beaming directly into the parts cleaner with flexible hoses and covers which shall shut-off automatically in case of fire.

2.1.1.4 The electrical power shall be a minimum of 115 volts, AC, 60 Hz, 3.5 amps.

2.1.1.5 Parts cleaners shall be installed allowing serial numbers to be visible without moving any equipment.

2.1.1.6 Parts cleaners with a capacity of 50 to 80 U.S. gallons shall be water based containing no volatile organic compounds (VOC), nitrates, amines, or phosphates; shall protect metals from rusting; be non-photo chemically reactive; non-carcinogenic; and have the least number of constituents which would require regulation pursuant to the requirements of the Superfund Amendments and Reauthorization Act, Title III, Section 313, North Carolina Toxic Air Pollutants;

Title III of 1990 Clean Air Act Amendments, 40 CFR Part 261.

3.0 CLEANING SOLUTION.

3.1 Cleaning solution shall be a recycled or virgin mineral spirits capable of cleaning items and parts from various types of military and non-military equipment. It shall have a flashpoint above 141° Fahrenheit and be nonhazardous, i.e. Aprosolve 680 MIL-PRF-680C NOT .1 Type ll.

3.2 Shall be formulated for the removal of dirt, oil, grease, fuel, carbon, soot, etc.

3.3 Shall not leave any film or residue, after use, which would require additional cleaning and degreasing of items.

4.0 SPECIFIC TASKS.

4.1 Parts Cleaner Installations, Service, Relocations, and Maintenance.

4.1.1 Parts Cleaner Installations, Relocations, and Removals. The Contractor shall provide labor, tools, equipment, and transportation required to install, relocate, and remove all parts cleaners.

4.1.2 Parts Cleaner Maintenance. The Contractor shall provide both routine and on-call maintenance service on all parts cleaners in accordance with the requested service interval listed in the contract line item description. The Contractor shall furnish all repair parts, labor, tools, equipment, and transportation required to accomplish inspecting, cleaning, lubricating, adjusting, calibrating, vacuuming (if required), and repairing items. Contractor shall maintain all equipment in this contract at levels necessary to provide the specified functions to meet the manufacturer's current equipment specifications and applicable Government regulations and directives. The contractor shall provide an annual report on all maintenance records for parts cleaners.

4.2 Cleaning Solution.

The Contractor shall:

4.2.1 Upon initial installation, furnish new parts cleaners with sufficient amounts of new cleaning solution to operate them as prescribed by the manufacturer.

4.2.2 Replenish or replace cleaning solution, as needed, at each service interval to maintain parts cleaner operation as prescribed by the manufacturer. Total change out of the solvent cleaning solution shall only be done if the solution cannot be filtered clean by the parts cleaner.

4.2.3 Handle, transport, and dispose of all non-hazardous and hazardous cleaning solution per EPA, federal, state and local laws and codes, and other applicable regulations.

4.3 Filtration System and/or Filters.

4.3.1 Replace filters with new filters, as needed, at each service interval to maintain parts cleaner operation as prescribed by the manufacturer.

4.3.2 Handle, transport, and dispose of all non-hazardous and hazardous filters, per EPA, federal, state and local laws and codes, and other applicable regulations.

4.4 Additional Contractor Responsibilities.

4.4.1 License. The Contractor or subcontractor shall possess all necessary state and federal licenses and permits, which are required by EPA, federal, state and local laws and codes, and other applicable regulations, for the transport, treatment, storage and disposal of recyclable materials mentioned in this contract. The Contractor shall possess a valid state treatment/storage/disposal (TSD) permit if any co-mingling of solvent occurs within the state. All the above shall be kept current and updated throughout the entire term of the contract and during any resultant activity relating to the performance of the contract. A copy of any permit or license shall be provided within 48 hours of request.

4.4.2 The Contractor shall take proper safety and health precautions to protect Government and Contractor personnel, the public, and the property of others from hazardous waste exposure/contamination.

4.4.3 The Contractor, in the performance of this contract, shall comply with and give all stipulations and representations required by any applicable federal, state, municipal or local law or executive order, or applicable rules, orders, regulations or requirements of any Government department or bureau.

4.4.3.1 Citations against the Contractor for noncompliance with environmental standards are a matter for resolution between the Contractor and the issuing office. Payment of fines and/or penalty charges associated with citations issued by EPA, federal, state, or local officials shall be the responsibility of the Contractor and not made the subject of claims.

4.4.4 The Contractor shall perform contract services in a safe, efficient and lawful manner using trained and qualified personnel. Work shall be accomplished in strict conformity with the best commercial practices for this type of service.

4.4.5 The Contractor shall retain title to all parts cleaners, cleaning solutions, filters (if used), supplies, parts, etc.

4.4.6 Contractor responsibilities: The contractor must ensure a unit representative is present during all service calls. The contractor is responsible for all cleanups of spills or leaks, and disposal of all cleanup materials. Cleanup and disposal will be in accordance with all applicable federal, state, local and municipal laws and regulations. Contractor must provide a copy of their cleanup plan to the contracting officer.

Spills. Incidental drag out and drips are not a spill. However, these must still be reported to the unit representative and the contractor is still responsible for cleanup. All spills greater than drag out or drip must be reported to the unit immediately.

* The Contractor shall assume responsibility for any accidents involving cleaning solution, hazardous and nonhazardous materials, etc., unless the Government is proven to be at fault.*

Unit responsibilities: Unit G-4/S-4 must maintain a copy of the contract, and the unit must ensure a representative is present during all service calls. The unit is responsible for reporting to Fire Department 911 any time a spill is noticed from a parts washer. Fire Department will determine any follow on support from EMD and then EMD will determine if any further reporting is necessary. If required by EMD, a written follow-up report shall be submitted no later than 24 hours after the initial telephonic report.

4.4.7 The Contractor shall assume responsibility for any ground or water pollution resulting from a spill when the Contractor is handling, transporting, or disposing of cleaning solutions, filters, and other hazardous and nonhazardous materials. The Contractor shall clean up the pollution in accordance with EPA, federal, state and local laws and codes, and other applicable regulations, and pay all costs and expenses incurred.

4.4.8 The Contractor shall insure that all equipment used in the performance of this contract is in a safe and serviceable condition per manufacturer’s specifications.

4.5 Department of Transportation Requirements Hazardous Waste.

4.5.1 Utilize containers which meet Department of Transportation requirements (See 49 CFR 178) and requirements of 40 CFR 263.

4.5.2 Provide and prepare hazardous waste manifests which shall be signed by a qualified Environmental Affairs Dept. (EAD) representative at the site prior to removing used cleaning solution or filters from the base, if required by current EPA regulations.

4.5.3 Mark and label containers that have hazardous waste in accordance with 40 CFR 262.

5.0 LIABILITY.

The Government will not be responsible in any way for the Contractor’s personal supplies, equipment, materials, or belongings brought into the buildings or on the grounds to perform services, except contractor owned parts cleaners. This includes loss or damage caused by fire, theft, hurricane, accident, or other disaster.

6.0 CONTRACTOR UNAUTHORIZED WORK PERFORMANCE.

The Contractor shall not perform work that deviates from contract requirements and specifications. If the Contractor deviates from contract requirements and specifications without written approval of the Contracting Officer, such deviation shall be at the risk of the Contractor and any cost related thereto shall be borne by the Contractor.

7.0 CONTRACTOR’S QUALITY CONTROL PROGRAM.

The Contractor shall establish and maintain a complete quality control program to assure the requirements of the contract are provided as specified. When copies of these records are requested by the Government, the Contractor shall furnish them within (8) eight work hours after receiving notification. The Contractor's Quality Control Plan shall include:

7.1 An Inspection Plan covering all machines supplied via this contract. It must specify how the machines are to be inspected (either a scheduled or unscheduled basis), how often inspections shall be accomplished, and the title of the individual(s) who shall perform the inspections.

7.2 The methods for identifying and preventing deficiencies in the quality of service performed, before the level of performance becomes unacceptable.

7.3 Records of all inspections conducted by the Contractor and necessary corrective action taken.

7.4 A parts cleaner service work ticket log to account for the cleaning solution servicing, filtration system cleaning and/or replacement of filter(s) for parts cleaners. This log shall indicate the contract and delivery order number, parts cleaner serial number, unit, section, building number and date parts cleaner was serviced.

7.5 A parts cleaner delivery, relocation, and removal work ticket log. This log shall indicate the contract and delivery order number, parts cleaner serial number, unit, section, building number, and date parts cleaner was delivered, relocated, or removed.

7.6 A parts cleaner maintenance and repair work ticket log. This log shall indicate the contract and delivery order number, parts cleaner serial number, unit, section, building number, and date parts cleaner maintenance or repair was completed.

8.0 RECORDS.

At a minimum the following shall be made available within 48 hours of request:

a. Work Ticket Logs for services, deliveries, relocations, removals, maintenance, and repairs.

b. Complete EPA Form 8700-22 (REV 9-88) “Uniform Hazardous Waste Manifest”, when required.

c. Listing of Quality Control Inspections by date and time.

d. Contractor’s Quality Control Records maintained by date and time as required by the Contractor’s Quality Control Plan.

9. 0 DOCUMENTS AND REQUIRED REPORTS.

9.1 Machine Location and Service Report. The Contractor shall furnish a Machine Location and Service report, every 4 weeks, indicating the following for each parts cleaner: building location, unit, section and serial number;

size of solvent tank and type of solvent used; service dates and serviced by; total number of gallons spent or clean when serviced. All reports shall be generated and delivered in electronic format (Microsoft Excel or Access). A copy of this 4 week report shall be forwarded to both the Organization and EAD Representatives no later than 7 calendar days after completion of service. (Deliverable 1)

9.2 Uniform Hazardous Waste Manifest. When required under 40 CFR 262, the Contractor shall furnish the EAD Representative with a legible generator copy of EPA Form 8700-22 "Uniform Hazardous Waste Manifest" (Manifest) along with a completed “Land Disposal Restriction” (LDR) form on the date of service. (Deliverable 2 and 3) The manifest and LDR shall reflect the total hazardous waste materials collected and transported and all other information necessary to identify the user and location and to facilitate proper disposal. The manifest shall be signed by an EAD employee authorized to sign hazardous waste manifests. Not later than 35 days after transport and delivery of hazardous cleaning solution and filters, the Contractor shall furnish a legible manifest generator copy to the EAD Representative. Resource Conservation and Recovery Act Rules and Regulations for using the Uniform Hazardous Waste Manifest System shall apply.

9.3 Safety Data Sheets (SDS). Prior to initial placement of parts cleaners, a current SDS shall be submitted to the EAD representative for each type of cleaning solvent utilized in support of this contract. The Contractor shall also furnish a current SDS at each location where deliveries are made for each type of cleaning solvent used at that location. (Deliverable 4). SDS shall be furnished upon commencement of the service contract and within 30 calendar days of a change in formulation of cleaning solutions provided. The SDS/MSDS shall identify all hazardous materials furnished by the Contractor.

9.4 OSHA Compliant Operating Instruction Labels. The Contractor shall provide parts cleaners with labeling which will instruct the operator(s) of the parts cleaners how to safely and properly operate them in accordance with OSHA 1910.145 and OSHA 1910.1200. (Deliverable 5)

9.5 Work Ticket. A separate work ticket shall be required for each installation, relocation, removal, maintenance, and/or repair call for parts cleaners. The work ticket shall have a minimum of three parts and shall have clearly marked spaces for the required information. The Contractor shall submit a copy of the required service work ticket to the EAD Representative, as subject matter expert (SME), for approval within 10 business days after award.

(Deliverable 6) If not approved, the contractor shall resubmit, with changes, until approved. Each resubmission shall be within three (3) business days of each rejection.

9.5.1 Contractor shall clearly identify the service being performed. The Unit/Dept Representative will fill out the required Government information. The Contractor is responsible for filling out the required Contractor information. All information shall be written legibly in indelible ink. A copy of the service ticket shall be given to the Unit/Dept Representative for proof of service, at the completion of service.

(Deliverable 7)

9.5.2 A work ticket summary shall be submitted to the Organization and EAD Representatives prior to submittal of the Contractor's invoices for each billing cycle. (Deliverable 8)

9.5.3 The work ticket shall have clearly marked spaces for the following information:

Contract/Delivery Order Number Date/Time Contractor Notified Unit/Dept, Section, Phone Number Model/Serial Number(s) of Equipment, Size, Quantity Installation: Building # & Room # Where Installed _______ Relocation: Building # & Room # Moved From _______/Building # & Room # Moved To _______ Removal: Building # & Room # Removed From _______ Cleaning Solution Service: Amount of solution provided _______ Filtration System Cleaned: Yes_____ No_____ Filter(s) replaced (If used): Quantity _______ On-Call Maintenance: Building #& Room # /Unit Description of Problem/ Technician's Description of Problem Technician's Printed Name and Signature Date/Time Service Completed Unit/Dept Representative's Comments ( ) Work Satisfactory ( ) Work Unsatisfactory Unit/Dept Representative's Printed Name & Signature/Phone #/Date & Time

9.6 Summary Report. At the conclusion of each calendar year (and not later than the 2nd Monday of January), the Contractor shall provide to the EAD representative an annual summary report for each different type of solvent and filters (if used) removed from the serviced units during the period 1 January through 31 December. Weights shall be provided for each waste stream and be reported in pounds. (Deliverable 9)

10.0 DELIVERABLES.

# PARAGRAPH DELIVERABLE FREQUENCY RECIPIENT DUE

1 9.1 Machine

Location and Service Report

Every 4 weeks EAD Representative and Organization

Representative

No later than 7 calendar days after completion of service

2 9.2 EPA FORM

8700-22 “Uniform Hazardous

Waste Manifest”

As required EAD Representative

On date of service

3 9.2 Land Disposal Restriction Form

As required EAD Representative

On date of service

4 9.3 Safety Data Sheet (SDDS)for solvent

Start of contract when solvent formulation is changed

EAD

Representative and at location of each machine

Within 3 working days of start of contract

9.3 Safety Data

Sheet (SDDS)for solvent

When solvent formulation is changed

EAD

Representative and at location of each machine

Within 30 calendar days of a change in formulation

5 9.4 OSHA

Compliant Operating Instruction

Labels

With each installation

On each machine

At time of installation

6 9.5 Work ticket Format Until approved EAD Representative

Initial within 10 business days of contract award, revisions – three

(3) business days after rejection 7 9.5.1 Work Ticket Each service call Copy to

EAD

Representative and Unit/Dept Representative at service location

Upon completion of service call

8 9.5.2 Work Ticket Summary

Each invoice submission

Copy to

EAD

Representative and

Organization Representative

Upon submission of invoice

9 9.6 Summary Report Annually EAD Representative and Organization

Representative

Report due 2nd Monday in

January for period 1 Jan

31 Dec

10.1 Recipient: To be provided at time of award.

11.0 ADDITIONAL INFORMATION.

11.1 Hours of Operation. All contract deliveries and performance shall be accomplished during the hours of 7:30 a.m. to 4:30 p.m., Monday through Friday (except holidays or emergencies observed by this base). The above hours may be changed by mutual agreement between the CONTRACTING OFFICER, and the Contractor.

11.2 Observed Holidays. Federal holidays observed by this base are New Year's Day, Martin Luther King, Jr.'s Birthday, Presidents’ Day, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans Day, Thanksgiving Day, Christmas Day, and other specifically designated days that are mutually agreed upon by the CONTRACTING OFFICER and the Contractor. When a holiday falls on a Sunday, the following Monday will be observed as a legal holiday. When a holiday falls on a Saturday, the preceding Friday is observed as a holiday by U.S. Government agencies.

11.3 Work Schedule Adjustments Due to Emergency Base Closures. In the event of a base closure due to national emergencies, inclement weather conditions (snow and ice storms, hurricanes, tornadoes, etc.) and other emergency situations, notification will be given by TV and radio announcements, telephone, verbal means, etc.

Marine Corps Air Station, Cherry Point, NC weather line phone number is (252) 466-3093. Upon receiving notification by one of the above mediums that the base has returned to normal operations, the Contractor shall resume normal work hours.

11.4 Government Observations. Government personnel such as the Department of Defense Inspection Teams, Navy Auditors, Environmental Inspectors, Contracting, etc., are authorized to observe Contractor operation.

Observing personnel will not interfere with Contractor’s performance.

11.5 Any repairs needed on contractor furnished equipment shall be performed within 48 hours after notification or at the next regular service call, whichever is sooner.

Performance Requirement Summary (PRS)

Objective Standard Location

Acceptable Quality Level

(AQL)

Standard

Quality Assurance Evaluator/Deliverables PoC

Inspection, Type and Frequency

Leasing of Equipment

In accordance with PWS

95% -Timeliness

- Quality -Accuracy

Technical PoC Random Inspection

Maintenance of Government/ Contractor Owned Equipment

In accordance with PWS

95% -Timeliness

- Quality -Accuracy

Technical PoC Random Inspection

UNAUTHORIZED WORK PERFORMANCE

The Contractor shall not perform work that deviates from the purchase order (PO) and the Performance Work Statement (PWS). If the Contractor deviates from the PO and the PWS without approval of the CONTRACT ADMINISTRATOR / CONTRACTING OFFICER, such deviation shall be at the risk of the Contractor and any cost related thereto shall be borne by the Contractor.

CONTRACT ADMINISTRATION

1.0 Contract Administration for the Government

a. The following representative of the Contracting Office shall be contacted for contract administration purposes:

Name: Jeffrey G. Penny Phone: (252) 466-2844 DSN: 582-2844 Email: jeffrey.penny@usmc.mil

2.0 Communications

a. Except as specified in paragraph (b) below, no order, statement, or conduct of Government personnel who visit the contractor’s facilities or in any other manner communicate with contractor personnel during the performance of this contract shall constitute a change under the “Changes” clause of this contract.

b. The contractor shall not comply with any order, direction or request of Government personnel unless it is issued in writing and is signed by the Contracting Officer or is pursuant to specific authority otherwise included as a part of this contract.

c. A Contracting Officer for the Marine Corps Air Station, Cherry Point, NC, is the only person authorized to approve changes in any of the requirements of this contract and, notwithstanding, provisions contained elsewhere in this contract, the said authority remains solely the Contracting Officer’s. In the event the contractor effects any change at the direction of any person other than a designated Contracting Officer, the change will be considered to have been made without authority and no adjustment will be made.

d. The contact information for the Contracting Officer is:

Name: Larry Davis Address: Cherry Point Satellite Contracting Office PSC Box 8018 Bldg. 159, MCAS Cherry Point, NC 28533-0018 Phone: (252) 466-7765 DSN: 582-7765

ADDENDUM TO FAR 52.212-1

1) Submission of Quote

a) The vendor is responsible for ensuring that quotes are received in the Contracting Office no later than 4:00 PM (EDT) on 31 January 2024 as indicated on page one (1) of this solicitation. Failure of vendor’s quote to be received prior to the hour and date specified may result in rejection of the quote.

b) Quotes shall be submitted electronically via email jeffrey.penny@usmc.mil.

c) RFQ Number M6700124Q1025 must be clearly shown in the subject line.

2) Instruction for the Preparation of Quotes: The vendor shall submit the following as part of their quote:

a) Information that demonstrates the vendor’s ability to provide the service in accordance with the requirements of the performance work statement within in the required Period of Performance (POP).

b) Quoted firm-fixed price for each line item shown – for completion of all supplies/services in accordance with the requirements of the Performance Work Statement.

c) Vendor must include unit price and total amount for each line item. Vendor shall quote FOB Destination pricing.

d) Completed SF1449 to include:

i) Signed/completed page 1 (Blocks 17 and 30)

ii) Completed Representations and Certifications: The following representations and certifications must be completed and returned as part of the vendor’s quote

e) Past Performance Information, to include the following:

i) Vendors may submit at least three (3) relevant past performance references. Relevant past performance is defined as performance of contracts similar in technical complexity to this requirement. Include the following information for each contract listed:

(a) Agency or company name.

(b) Contract number (if applicable).

(c) Point of Contact name, phone number and fax number.

(d) Brief description of contract and relevance to this requirement.

(e) Total contract value.

(f) Period of performance.

ii) If a vendor has no relevant past performance history, a vendor must affirmatively state that it possesses no relevant past performance history.

FAR 52.212-3 (Note that vendor is only required to complete paragraph (b) if they have not completed annual representations and certifications via the System for Award Management (SAM) website.)

ADDENDUM TO FAR 52.212-4(C)

Unilateral administrative changes (e.g.,a change in the paying office, line of accounting, cost code or the appropriation data, changing points of contact or telephone numbers, and correct typographical errors) are authorized under this section, so long as the written purchase order change does not affect the substantive rights of the parties and is consistent with customary commercial practice.

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government 0002 Destination Government Destination Government 0003 Destination Government Destination Government 0004 Destination Government Destination Government 0005 Destination Government Destination Government 0006 Destination Government Destination Government 0007 Destination Government Destination Government 0008 Destination Government Destination Government 0009 Destination Government Destination Government 0010 Destination Government Destination Government 0011 Destination Government Destination Government 0012 Destination Government Destination Government 0013 Destination Government Destination Government 0014 Destination Government Destination Government 0015 Destination Government Destination Government 1001 Destination Government Destination Government 1002 Destination Government Destination Government 1003 Destination Government Destination Government 1004 Destination Government Destination Government 1005 Destination Government Destination Government 1006 Destination Government Destination Government 1007 Destination Government Destination Government 1008 Destination Government Destination Government 1009 Destination Government Destination Government 1010 Destination Government Destination Government 1011 Destination Government Destination Government 1012 Destination Government Destination Government 1013 Destination Government Destination Government 1014 Destination Government Destination Government 1015 Destination Government Destination Government 2001 Destination Government Destination Government 2002 Destination Government Destination Government 2003 Destination Government Destination Government 2004 Destination Government Destination Government 2005 Destination Government Destination Government 2006 Destination Government Destination Government 2007 Destination Government Destination Government 2008 Destination Government Destination Government 2009 Destination Government Destination Government 2010 Destination Government Destination Government 2011 Destination Government Destination Government 2012 Destination Government Destination Government 2013 Destination Government Destination Government 2014 Destination Government Destination Government 2015 Destination Government Destination Government

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 12 mths. ADC 12 M30146

KURT AVELLAR

ENVIRONMENTAL AFFAIRS

DEPARTMENT (EAD)

BLDG 4223 ACCESS RD

CHERRY POINT NC 28533

252-466-3117

M30146

0002 12 mths. ADC 12 (SAME AS PREVIOUS LOCATION)

0003 12 mths. ADC 12 (SAME AS PREVIOUS LOCATION)

0004 12 mths. ADC 12 (SAME AS PREVIOUS LOCATION)

0005 12 mths. ADC 6 (SAME AS PREVIOUS LOCATION)

0006 12 mths. ADC 6 (SAME AS PREVIOUS LOCATION)

0007 12 mths. ADC 24 (SAME AS PREVIOUS LOCATION)

0008 12 mths. ADC 30 (SAME AS PREVIOUS LOCATION)

0009 12 mths. ADC 8 (SAME AS PREVIOUS LOCATION)

0010 12 mths. ADC 12 (SAME AS PREVIOUS LOCATION)

0011 12 mths. ADC 12 (SAME AS PREVIOUS LOCATION)

0012 12 mths. ADC 8 (SAME AS PREVIOUS LOCATION)

0013 12 mths. ADC 8 (SAME AS PREVIOUS LOCATION)

0014 12 mths. ADC 4 (SAME AS PREVIOUS LOCATION)

0015 12 mths. ADC 4 (SAME AS PREVIOUS LOCATION)

1001 12 mths. ADC 12 (SAME AS PREVIOUS LOCATION)

1002 12 mths. ADC 12 (SAME AS PREVIOUS LOCATION)

1003 12 mths. ADC 12 (SAME AS PREVIOUS LOCATION)

1004 12 mths. ADC 12 (SAME AS PREVIOUS LOCATION)

1005 12 mths. ADC 6 (SAME AS PREVIOUS LOCATION)

1006 12 mths. ADC 6 (SAME AS PREVIOUS LOCATION)

1007 12 mths.