SF_30_M00681-15-T-0107.pdf

M0124415SUC4008

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this amendment is to remove the Warranty requirement (CLIN 0008) from the solicitation. The close date is extended from 13 Aug 2015 to 0800 on 17 Aug 2015.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 5

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 12-Aug-2015

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X M00681-15-T-0107

X 9B. DATED (SEE ITEM 11)

23-Jul-2015

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

12-Aug-2015

CODE

REGIONAL CONTRACTING OFFICE-MCIWEST

P O BOX 555027

CAMP PENDLETON CA 92055-5027

M00681 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

M00681-15-T-0107

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

SUPPLIES OR SERVICES AND PRICES

CLIN 0008

The CLIN extended description has changed from Manufacturers warranty system support includes bug fixes, annual software updates, access to the Company's automated helpdesk and phone support, and annual on-site visit to ensure all systems are full being utilized. to Manufacturers warranty system support includes bug fixes, annual software updates, access to the Company's automated helpdesk and phone support, and annual on-site visit to ensure all systems are full being utilized.**This CLIN is not required..

The pricing detail quantity has decreased by 1.00 from 1.00 to 0.00.

DELIVERIES AND PERFORMANCE

The following Delivery Schedule item for CLIN 0008 has been changed from:

DELIVERY DATE QUANTITY SHIP TO ADDRESS UIC

01-SEP-2015 1 M01244

ROSALVA CALDERON

BLG 3219

CANYON AIR DEFENSE COMPLEX

YUMA AZ 85369

928-269-2722 FOB: Origin

M01244

To:

DELIVERY DATE QUANTITY SHIP TO ADDRESS UIC

01-SEP-2015 0 M01244

ROSALVA CALDERON

BLG 3219

CANYON AIR DEFENSE COMPLEX

YUMA AZ 85369

928-269-2722 FOB: Origin

M01244

The following have been modified:

PERFORMANCE WORK STATEMENT

EQUIPMENT PURCHASE THROUGH

PERFORMANCE WORK STATEMENT (PWS)

1. Background: Marine Aviation Weapons and Tactics Squadron (MAWTS-1) provides standardized advanced tactical training and certification of unit instructor qualifications that support Marine Aviation Training and Readiness (T&R). MAWTS-1 accomplishes this by conducting the semiannual Weapons and Tactics Instructors (WTI) Course and supplementary courses of instruction including MAWTS-1 Commanders Course, Marine Division Tactics Course (MDTC), Aviation Ground Support (AGS) Course, and Air Command and Control Officers Course. MAWTS-1 also provides assistance in the development and employment of aviation weapons and tactics.

2. Objectives: MAWTS-1 modeling and simulation supports (4) functional areas:

2.1. Training aviation unit instructors per Marine Corps Order(MCO) 3500.109 accomplished by conducting the semiannual Weapons and Tactics Instructors (WTI) Course.

2.2. Integration of joint Live Virtual Constructive (LVC) agencies such as Air Force Airborne Warning and Control System (AWACS) Mission Training Center (MTC) simulators, 32nd Army Air Missile Defense Command (AAMDC) simulators and Navy Fleet Synthetic Trainers (FST) to train aviation battle staffs during WTI and fleet support.

2.3. Aviation Combat Element ACE LVC training and integration in joint and Marine Air Ground Task Force(MAGTF) exercises such as Large Scale Exersice (LSE) and Integrated Training Exercise ( ITX).

2.4. Test and evaluation of future equipment and Tactics, Techniques, and Procedures per MAWTS-1 charter.

3. Scope: The contractor shall provide all equipment, tools, and materials, support (installation, hardware, and software) other items, and non-personal services necessary to provide MAWTS-1 with a modeling and simulation capability as defined in this PWS for all Weapons and Tactics Instructor courses and supplementary courses annually in accordance with the tasks defined below. The simulation system will be used to support a total of 30 USMC/joint/coalition WTI students per the semiannual WTI class who will learn to manage the simulation scenarios. This is the training audience. Upon completion, those students should know the simulation equipment requirements and have the required managerial skills to produce their own simulation scenario at parent command.

In addition, it is anticipated that there will be 5 USMC simulation system operators per class that will be response cells to the training audience. The response cells will enact commands given by the WTI students. When not in direct support of the WTI course, the simulation equipment will be used in support of supplementary courses and fleet support training offered by MAWTS-1. The equipment will be operated by MAWTS-1 staff and on-site modeling and simulation contractor (not provided by this PWS).

3.1. Period of Performance.

3.1.1. The contractor shall provide these services beginning on 1 September 2015 on-site at the MAWTS-1 training site aboard Marine Corps Air Station, Yuma, Arizona.

4. Applicable Documents. The following regulations apply and guide the requirements of the training:

MCO 3500.109 Marine Corps Aviation Weapons and Tactics Training Program; Navy and Marine Corps (NAVMC) Form 3500.14C Aviation Training and Readiness Program Manual; MCO 1553.3A Unit Training Management;

NAVMC 3500.119 Tactical Air Operations Center Training and Readiness Manual; and NAVMC 3500.95 Direct Air Support Center Training and Readiness Manual.

5. Task 1. The contractor shall provide a fully developed and operational commercial off the shelf (COTS) simulation system equipment and software, as outlined below, for the period outlined in paragraph 3.1 at MAWTS-1 training site aboard Marine Corps Air Station, Yuma, Arizona.

5.1. The contractor will provide all equipment and software required to operate a simulation system. The simulation system must be self-contained, meaning that it comes with all software and hardware required to operate and accomplish the below tasks. Simulation system must run Windows 7 and be information architecture (IA) compliant with Marine Corps IA protocols. MAWTS-1 will have hardware administration rights to the Simulation system in order to apply IA protocols. Simulation system must have the ability to integrate Marine Corps Command and Control (C2) systems with other Marine Corps and joint ground and aviation simulation systems over a federated and Distributed Interactive Simulation (DIS) compliant network.

5.2. The simulation system must replicate air, land, and sea C2 tactical radars. It must produce realistic entities or targets that an operator would see if utilizing real radar vice this simulation system. Not only must this simulation system generate realistic entities that move on pre-scripted paths, but a simulation system operator must be able to dynamically control (or maneuver) each individual entity in real-time.

5.3. The simulation system shall be interoperable, and interface directly with organic Marine Corps tactical air command and control equipment. Specifically, the simulation system shall simulate a radar input which is capable of injecting an air operations scenario directly into the Mobile Tactical Air Operations Module (MTAOM) and Common Aviation Command and Control System (CAC2S) via the same tactical radar ports used by the actual tactical radars (Multi-Radar Tracker (MRT) and/or Multi-Source Correlator Tracker (MSCT) respectively).

5.4. The simulation system, located in the white cell and utilizing a multicast User Datagram Protocol

(UDP) signal, shall have the capability to convert multicast UDP into a unicast UDP signal for transmission and receipt over a tactical Secure Internet Protocol Router (SIPR) network and convert from unicast UDP back to multicast UDP at both the MTAOM and CAC2S field locations. The simulation systems shall have the capability for the UDP conversions to occur in reverse order from both field locations to the white cell.

5.5. The simulation system shall have an intuitive graphical user interface which enables the simulation system operators to easily create realistic and robust combat scenarios and reduce the total number of man-hours used to create the scenario.

5.6. The simulation system shall support the ability for operators, acting as pilots, to take dynamic control of aircraft entities within the scenario in real-time. The simulation system must (1) provide workstations that allow operators to manage the simulation scenario and (2) take control of pre-scripted entities on pre-scripted routing through airspace and dynamic maneuver them on alternative routing at alternative altitudes. The simulation system will include five (5) simulation operator workstations to accomplish this task.

5.7. The simulation system shall be capable of emulating any friendly or threat aircraft, surface to weapons systems, or naval entities. The simulation system must have an extensive library of weapons employment specifications of friendly and threat aircraft, surface, and naval weapons systems that it can emulate.

5.8. The simulation system shall have the ability to import a Theater Battle Management Core System (TBMCS) generated Air Tasking Order (ATO) in United States Message Text Format (USMTF) and generate an air scenario based on that ATO. The ATO contains specific aircraft types, number of aircraft, aircraft routing, departures times and from which airport, weapons load outs, aerial refueling times and fuel amounts, and orbits.

The Airspace Control Order (ACO) contains all of the airspace control measures, (flight paths, restricted operating zones, etc.) that the aircraft are scheduled to fly as identified on the ATO.

5.9. The simulation system, while running a scenario, must allow an operator to create an entity or entities “on-the-fly,” and inject those into the CAC2S without stopping the scenario. The operator must also be able to control each entity’s organic capability (e.g. simulated radar becomes degraded, so it tracks fewer or no targets or a fighter can actually launch its weapons against an enemy fighter or ground target). The operator must be able to control each entity's weapon, sensor, Identify Friend or Foe (IFF), and data link system to include: weapon and sensor systems that can be put in auto-fire mode; having the entity detect and engage opposing forces on its own;

sending aircraft auto-Return To Base (RTB); and executing automated tactics and on routes in and out of target areas. Each entity must also have the ability to be put in an “auto-mode” so that it (1) engages other entities according to realistic weapons employment ranges and (2) will complete a mission and RTB on its own.

5.10. The simulation system shall include realistic damage assessment based on weapon type, warhead size/type, and target size/armor. Based on the employed weapon, the simulation system would produce a battle damage assessment that would be proportional to the size of the weapon used against the target type.

5.11. The simulation system shall have the ability to save and play back a scenario for debriefing and lessons learned in front of the training audience. Playback must have the ability to be run up to, but not limited to 10x speed (meaning 10 seconds playback for every 1 real-time second). Playback must also have the ability to display playback time to the training audience.

5.12. The simulation system shall have the ability to create, move and modify ground unit symbols using Mil-Standard 2525 and Marine Air Ground Task Force (MAGTF) Operations(OPS) TERM and Graphics. This ability should be such that it indicates the locations and identities of friendly and enemy ground units.

5.13. The simulation system, having a local server, must have the ability to connect with two individual

USMC C2 systems; both of which will be geographically displaced from the server, but within Internet-Protocol (IP) connectivity. Each of these units will be expected to generate a tactical air picture. The simulation system must be able to produce and transmit to the USMC C2 systems a simulated radar feed that is unique to each USMC C2 system per their geographic location.

5.14. The simulation system must be Distributed Interactive Simulation (DIS) compliant and have the ability to integrate both voice communication and entity management with joint C2 simulation platforms through the Distributed Mission Operations Network (DMON).

5.15. The simulation system must be able to support four (4) entity manipulation operator consoles and one

(1) scenario editing console simultaneously. When connected to the DMON, the simulation system must be able to support Voice-Over-Internet-Protocol (VOIP) connections for up to three (3) different joint C2 simulation systems.

5.16. The simulation system must have the ability to transmit entities via Mil-Standard 3016, Joint Range

Extension Application Protocol C (Secure Internet Protocol Router Network).

5.17. The contractor shall deliver and set up all equipment and software to the MAWTS-1, Bldg. #406, Marine Corps Air Station, Yuma, AZ 85369 no later than 1 September 2015.

6. Task 2. The contractor shall provide personnel necessary for installation, integration, and testing of the Simulation System. Successful installation is defined as simulation system operational and able to perform all functions as outlined in paragraph 5 (Task 1).

(End of Summary of Changes)