18D11879_K-Fitting_Cold_Work_Set.pdf

A

B

C

D

8 7 6 5 4 3 1

D

C

A

12345678

APPROVEDDESCRIPTIONREVZONE

REVISION HISTORY

CHECKED

96916

ANODIZE

CADMIUM PLATE

MACHINE FINISH 125

FINISH TABLENO.

D 18D11879

TITLE

DAISIZE

SCALE REF SHEET OF

REV

OSH

APPROVED

DRAWN

CHECKED

ENGINEER

T.BRITTINGHAM 07-09-2018

1/1FILE NUMBER:

DESTRUCTION NOTICE -FOR UNCLASSIFIED, LIMITED

DOCUMENTS, DESTROY BY ANY METHOD THAT WILL

PREVENT DISCLOSURE OF CONTENTS OR

RECONSTRUCTION OF THE DOCUMENT.

FOR CLASSIFIED DOCUMENTS, FOLLOW THE

PROCEDURES IN DOD 5220.22-M.

APPLICATION

USED ONNEXT ASSY

CONTR NO.

CONTR DWG NO.

THIRD ANGLE PROJECTION

DECIMALS ANGLES

.X=

.XX= .01

.005.XXX=

PARTS LIST

DISTRIBUTION STATEMENT C -DISTRIBUTION AUTHORIZED TO U.S. GOVERNMENT

AGENCIES AND THEIR CONTRACTORS TO PROTECT TECHNICAL DATA REQUIRED

SHALL BE REFERRED TO COMMANDING OFFICER, NAVAL AIR DEPOT

CAD MAINTAINED. CHANGES SHALL BE INCORPORATED BY THE DESIGN ACTIVITY

FOR OFFICIAL USE, AND FOR ADMINISTRATIVE OR OPERATIONAL PURPOSES ONLY,

DETERMINED ON 16 JANUARY 1996. OTHER REQUESTS FOR THIS DOCUMENT

MARINE CORPS AIR STATION, CHERRY POINT, N.C. 28533.

3.

4.

.1

ENGINEER

APPROVED

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

TOLERANCES ON

FRACTIONS

COLD WORK SET, K-FITTING

uuu .5

NAVAL AIR DEPOT

U.S. MARINE CORPS AIR STATION

CHERRY POINT, NC

REV

SH1

REV

STATUS 4.0\4.8\4.8DRAFTING\REL\CSE\18D11879

B

REVSHDWG NO. 18D11879 1

234567

PROTOTYPE SKETCH 7/25/2018

TRAVIS BRITTINGHAM

252-464-8067

NOTES:

1. APPLICABLE STANDARDS/SPECIFICATIONS:

MIL-STD-31000A-2013, TECHNICAL DATA PACKAGES.

ASME Y14.100-2017, ENGINEERING DRAWING PRACTICES.

ASME Y14.5-2009, DIMENSIONING AND TOLERANCING.

MIL-STD-130N-2012, IDENTIFICATION MARKING OF U.S. MILITARY

PROPERTY.

ASTM A29, STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS

FOR STEEL BARS, CARBON AND ALLOY, HOT-WROUGHT.

ASTM A276, STANDARD SPECIFICATION FOR STAINLESS STEEL BARS

AND SHAPES.

MIL-DTL-16232, PHOSPHATE COATING, HEAVY, MANGANESE OR ZINC

BASE.

SAE-AMS2700, PASSIVATION OF CORROSION RESISTANT STEELS.

2. REMOVE ALL BURRS AND SHARP EDGES.

3. USED ON: V-22 AIRCRAFT TO COLD WORK REPAIR THE PANEL

FASTENER HOLES OF THE K-FITTING ASSEMBLY, P/N (97499) 901-

032-622.

4. REF: ISS-WMS TASK NO. 06905385. V-22 SERD 4219. REFERENCED

IN MANUAL A1-V22AB-TIS-000.

5. ITEM IDENTIFICATION: ETCH OR ENGRAVE AS SHOWN IN

ACCORDANCE WITH (IAW) MIL-STD-130 IN .15-INCH-HIGH

CHARACTERS AT APPROXIMATE LOCATION SHOWN.

6. IDENTIFICATION PLATE SHALL BE RIVETED IN PLACE AT

APPROXIMATE LOCATION SHOWN USING BLIND RIVET, P/N

M24243/1B402. IDENTIFICATION PLATE SHALL BE IAW NAVAIR

DRAWING 3909AS9999-7 SUBSTITUTING THE FOLLOWING

INFORMATION:

AAAAAAAAA WITH V-22 K-FITTING COLD WORK SET

XXXXXXX-X WITH 18D11879-1

YYYYY WITH MANUFACTURER’S CAGE CODE

ZZZZZZZZZ WITH THE SERIAL NUMBER

BBBBB-BB-B-BBBB CONTRACT NO.

CCCC-CC-CCC-CCCC WITH NSN

DDDDD WITH 96916

7. PASSIVATE IAW WITH SAE-AMS2700.

8. HEAT TREAT TO TENSILE STRENGTH OF RC41-RC46 OR 190-220 KSI

PER SAE AMS-2759/1.

9. PHOSPHATE COAT IAW MIL-DTL-16232, TYPE M CLASS 2.

10. FIND NO. 26 LOWER DUNNAGE AND FIND NO. 27 UPPER DUNNAGE

SHALL BE IAW A-A-59136, CLASS I, TYPE I, GRADE A, COLOR

BLACK OR GREY. DUNNAGE INSERTS SHALL BE FABRICATED OF

LAMINATED PLANKS BONDED TOGETHER USING 3M HIGH

STRENGTH 90 SPRAY ADHESIVE PER MANUFACTURER’S

INSTRUCTIONS. DUNNAGE INSERTS TO HAVE SKINNED

(UNSKIVED) FINISH ON VISIBLE SURFACES (EXCLUDING CUTOUT

AREAS).

11. THE DIMENSIONS OF FIND NO. 26 AND 27 DUNNAGE SHALL MATCH

THE INTERIOR DIMENSIONS OF FIND NO. 79 STORAGE CASE WITHIN

+/- .12 INCH.

12. FIND NO. 26 AND 27 DUNNAGE SHALL BE PERMANENTLY BONDED TO

THE FIND NO. 79 STORAGE CASE USING 3M HIGH STRENGTH 90

SPRAY ADHESIVE PER MANUFACTURER’S INSTRUCTIONS.

13. FIND NO. 28 INVENTORY PLACARD AND 29 TOOL REFERENCE TABLE

SHALL BE POLYCARBONATE PER A-A-59502, TYPE III, CLASS 1

GRADE A, COLOR CLEAR. ARTWORK SHALL BE SUBSURFACE

PRINTED ON POLYCARBONATE SHEET. UPPER SURFACE SHALL BE

MATTE FINISHED. TEXT AND ARTWORK SHALL BE WHITE OVER

BLACK BACKGROUND. PERMANENCY AND LEGIBILITY

REQUIREMENTS SHALL COMPLY WITH MIL-STD-130. THE PLATE

SHALL BE BACKED WITH 3M HIGH STRENGTH TRANSFER TAPE

WITH ANY OF THE FOLLOWING 3M 300LSE ADHESIVES OR

ADHESIVE WITH EQUIVALENT PROPERTIES OF THE FOLLOWING 3M

PRODUCTS: 9471LE, 9472LE, 9671LE, 9672LE.

14. BOND FIND NO. 28 INVENTORY PLACARD AND FIND NO. 29 TOOL

REFERENCE TABLE TO FIND NO. 27 UPPER DUNNAGE AT

APPROXIMATE LOCATION SHOWN.

15. IDENTIFICATION OF THE SUGGESTED SOURCES OF SUPPLY

HEREON IS NOT TO BE CONSTRUED AS AN ENDORSEMENT BY THE

GOVERNMENT NOR AS A GUARANTEE OF PRESENT OR CONTINUED

AVAILABLILITY AS A SOURCE OF SUPPLY FOR THE ITEMS

DESCRIBED.

PARTS LIST CONTINUED ON SHEET 2

51 1 51439 CBM-8-1-N-1-30-V1 MANDREL, 1/4" 2ND OVERSIZE ø.2458 - .2462 50 1 51439 CBM-8-0-N-1-30-V1 MANDREL, 1/4" 1ST OVERSIZE ø.2298 - .2302 49 1 51439 CBM-6-3-N-1-30-V1 MANDREL, 1/4" NOMINAL ø.2228 - .2232 48 1 51439 CBM-6-1-N-1-30-V1 MANDREL, 3/16" 2ND OVERSIZE ø.1893 - .1897 47 1 51439 CBM-6-0-N-1-30-V1 MANDREL, 3/16" 1ST OVERSIZE ø.1738 - .1742 46 1 51439 CBM-4-4-N-1-30-V1 MANDREL, 3/16" NOMINAL ø.1652 - .1656 45 1 51439 CBSR-8-3-N-1 PRE-COLD WORK REAMER, 5/16" NOMINAL ø.283 - .286 44 1 51439 CBSR-8-1-N-1 PRE-COLD WORK REAMER, 1/4" 2ND OVERSIVE ø.251 - .254 43 1 51439 CBSR-8-0-N-1 PRE-COLD WORK REAMER, 1/4" 1ST OVERSIZE ø.235 - .238 42 1 51439 CBSR-6-3-N-1 PRE-COLD WORK REAMER, 1/4" NOMINAL ø.225 - .228 41 1 51439 CBSR-6-1-N-1 PRE-COLD WORK REAMER, 3/16" 2ND OVERSIVE ø.192 - .195 40 1 51439 CBSR-6-0-N-1 PRE-COLD WORK REAMER, 3/16" 1ST OVERSIZE ø.177 - .180 39 1 51439 CBSR-4-4-N-1 PRE-COLD WORK REAMER, 3/16" NOMINAL ø.169 - .171

38 1 51439 CBSD-8-3-N-1 PRE-REAM DRILL BIT, 5/16" NOMINAL

37 1 51439 CBSD-8-1-N-1 PRE-REAM DRILL BIT, 1/4" 2ND OVERSIVE

36 1 51439 CBSD-8-0-N-1 PRE-REAM DRILL BIT, 1/4" 1ST OVERSIZE

35 1 51439 CBSD-6-3-N-1 PRE-REAM DRILL BIT, 1/4" NOMINAL

34 1 51439 CBSD-6-1-N-1 PRE-REAM DRILL BIT, 3/16" 2ND OVERSIVE

33 1 51439 CBSD-6-0-N-1 PRE-REAM DRILL BIT, 3/16" 1ST OVERSIZE

32 1 51439 CBSD-4-4-N-1 PRE-REAM DRILL BIT, 3/16" NOMINAL

31 1 1 1 1 1 1 1 0KVE6 8492A034 BUSHING .125 ID X .25 OD X .25 L STEEL, RC61

30 1 96916 -30 IDENTIFICATION TAG

29 1 96916 -29 TOOL REFERENCE TABLE .06 X 8.12 X 13.12

28 1 96916 -28 INVENTORY PLACARD .06 X 9.12 X 14.12

27 1 96916 -27 UPPER DUNNAGE

26 1 96916 -26 LOWER DUNNAGE

25 1 96916 -25 SHIELDING PLATE .063 THK X 1.38 WD X 7.30 L 316 SS ASTM A276 1

24 1 96916 -24 SHIELDING PLATE .063 THK X 1.38 WD X 7.30 L 316 SS ASTM A276 1

23 1 96916 -23 SHIELDING PLATE .063 THK X 1.38 WD X 7.30 L 316 SS ASTM A276 1

22 1 96916 -22 SHIELDING PLATE .063 THK X 1.38 WD X 7.30 L 316 SS ASTM A276 1

21 1 96916 -21 SHIELDING PLATE .063 THK X 1.38 WD X 7.30 L 316 SS ASTM A276 1

20 1 96916 -20 SHIELDING PLATE .063 THK X 1.38 WD X 7.30 L 316 SS ASTM A276 1

19 1 96916 -19 SHIELDING PLATE .063 THK X 1.38 WD X 7.30 L 316 SS ASTM A276 1

18 1 96916 -18 LOCATOR ø.88 X 1.42 4140 ASTM A29 1 17 1 96916 -17 LOCATOR ø.88 X 1.42 4140 ASTM A29 1 16 1 96916 -16 LOCATOR ø.88 X 1.42 4140 ASTM A29 1 15 1 96916 -15 LOCATOR ø.88 X 1.42 4140 ASTM A29 1 14 1 96916 -14 LOCATOR ø.88 X 1.42 4140 ASTM A29 1 13 1 96916 -13 LOCATOR ø.88 X 1.42 4140 ASTM A29 1 12 1 96916 -12 LOCATOR ø.88 X 1.42 4140 ASTM A29 1 11 1 96916 -11 GUIDE ø.88 X .88 4140 ASTM A29 1

10 1 96916 -10 HANDLE .25 X 1.38 X 7.20 4140 ASTM A29 1

9 1 1 1 1 1 1 1 96916 -9 HANDLE ASSEMBLY

8 1 96916 -8 BUSHING-HANDLE ASSEMBLY

7 1 96916 -7 BUSHING-HANDLE ASSEMBLY

6 1 96916 -6 BUSHING-HANDLE ASSEMBLY

5 1 96916 -5 BUSHING-HANDLE ASSEMBLY

4 1 96916 -4 BUSHING-HANDLE ASSEMBLY

3 1 96916 -3 BUSHING-HANDLE ASSEMBLY

2 1 96916 -2 BUSHING-HANDLE ASSEMBLY

1 96916 18D11879-1 COLD WORK SET, K-FITTING

-9 -8 -7 -6 -5 -4 -3 -2 -1

FIND NO. NO. REQD PER ASSY

MATERIAL SPEC FINISHDAI

PART OR

IDENTIFYING NO. NOMENCLATURE OR DESCRIPTION STOCK MATERIAL

6.

1 1

1 1

6. 6.

10.

10.10.

10.

13.

13.

13.

13.

11.

11.

C

D

8 7 6 5 4 3 1

D

C

A

12345678

APPROVEDDESCRIPTIONREVZONE

REVISION HISTORY

CHECKED

SEE SHEET 1 FOR NOTES AND PARTS LIST

96916D 18D11879

DAISIZE

SCALE REF SHEET

REVDWG NO.

FILE NO.: 4.

DRAWN

CHECKED

ENGINEER

T.BRITTINGHAM 07-09-2018

NAVAL AIR DEPOT

U.S. MARINE CORPS AIR STATION

CHERRY POINT, NC

4.0\4.0\4.8\4.8DRAFTING\REL\CSE\18D11879

REVSHDWG NO. 18D11879

B

23/4

81 4 81349 M24243/1B402 BLIND RIVET ø.125 X .06 AL ALLOY MIL-R-24243/1E

80 AR 0KVE6 7610A256 SPRAY ADHESIVE, 3M 90 HIGH-STRENGTH 17.6 OZ AEROSOL

79 1 41NJ9 3i-2918-10 STORAGE CASE 10.9 X 18.0 X 29.0 (INT) MIL-STD-810G

78 1 51439 HP-20 MANUAL PULLER & RATCHET WRENCH

77 1 51439 MEN-14A-0823F NOSECAP, 5/16" NOMINAL ø1.50 X 3.50 76 1 51439 MEN-14A-0801F NOSECAP, 1/4" 1ST AND 2ND OVERSIZE ø1.50 X 3.50 75 1 51439 MEN-14A-0623F NOSECAP, 1/4" NOMINAL ø1.50 X 3.50 74 1 51439 MEN-14A-0601F NOSECAP, 3/16" NOMINAL THRU 2ND OVERSIZE ø1.50 X 3.50 73 1 51439 CBR-8-3-N-1-.3130 FINISH REAMER, 5/16" NOMINAL ø.312 - .315 72 1 51439 CBR-8-1-N-1-.2820 FINISH REAMER, 1/4" 2ND OVERSIZE ø.281 - .284 71 1 51439 CBR-8-0-N-1-.2670 FINISH REAMER, 1/4" 1ST OVERSIZE ø.266 - .269 70 1 51439 CBR-6-3-N-1-.2510 FINISH REAMER, 1/4" NOMINAL ø.250 - .253 69 1 51439 CBR-6-1-N-1-.2200 FINISH REAMER, 3/16" 2ND OVERSIZE ø.219 - .222 68 1 51439 CBR-6-0-N-1-.2040 FINISH REAMER, 3/16" 1ST OVERSIZE ø.203 - .206 67 1 51439 CBR-4-4-N-1-.1910 FINISH REAMER, 3/16" NOMINAL ø.190 - .193 66 1 51439 CBG-8-3-N-1 COMBINATION GAGE, 5/16" NOMINAL ø.2830-.2860 , ø.2870 65 1 51439 CBG-8-1-N-1 COMBINATION GAGE, 1/4" 2ND OVERSIZE ø.2510-.2540 , ø.2550 64 1 51439 CBG-8-0-N-1 COMBINATION GAGE, 1/4" 1ST OVERSIZE ø.2350-.2380 , ø.2390 63 1 51439 CBG-6-3-N-1 COMBINATION GAGE, 1/4" NOMINAL ø.2250-.2280 , ø.2290 62 1 51439 CBG-6-1-N-1 COMBINATION GAGE, 3/16" 2ND OVERSIZE ø.1920-.1950 , ø.1970 61 1 51439 CBG-6-0-N-1 COMBINATION GAGE, 3/16" 1ST OVERSIZE ø.1770-.1800 , ø.1810 60 1 51439 CBG-4-4-N-1 COMBINATION GAGE, 3/16" NOMINAL ø.1690-.1710 , ø.1720 59 1 51439 CBMG-8-3-N MANDREL GAGE, 5/16" NOMINAL ø.2782 - .2785 58 1 51439 CBMG-8-1-N MANDREL GAGE, 1/4" 2ND OVERSIZE ø.2453 - .2456 57 1 51439 CBMG-8-0-N MANDREL GAGE, 1/4" 1ST OVERSIZE ø.2293 - .2296 56 1 51439 CBMG-6-3-N MANDREL GAGE, 1/4" NOMINAL ø.2223 - .2226 55 1 51439 CBMG-6-1-N MANDREL GAGE, 3/16" 2ND OVERSIZE ø.1888 - .1891 54 1 51439 CBMG-6-0-N MANDREL GAGE, 3/16" 1ST OVERSIZE ø.1733 - .1736 53 1 51439 CBMG-4-4-N MANDREL GAGE, 3/16" NOMINAL ø.1647 - .1650 52 1 51439 CBM-8-3-N-1-30-V1 MANDREL, 5/16" NOMINAL ø.2787 - .2791

-9 -8 -7 -6 -5 -4 -3 -2 -1

FIND NO. NO. REQD PER ASSY

MATERIAL SPEC FINISHDAI

PART OR

IDENTIFYING NO. NOMENCLATURE OR DESCRIPTION STOCK MATERIAL

COLD WORK SET, K-FITTING

(VIEW SHOWN FOR REFERENCE ONLY)

C

D

8 7 6 5 4 3 1

D

C

A

12345678

APPROVEDDESCRIPTIONREVZONE

REVISION HISTORY

CHECKED

SEE SHEET 1 FOR NOTES AND PARTS LIST

96916D 18D11879

DAISIZE

SCALE REF SHEET

REVDWG NO.

FILE NO.: 4.

DRAWN

CHECKED

ENGINEER

T.BRITTINGHAM 07-09-2018

NAVAL AIR DEPOT

U.S. MARINE CORPS AIR STATION

CHERRY POINT, NC

4.0\4.0\4.8\4.8DRAFTING\REL\CSE\18D11879

REVSHDWG NO. 18D11879

COLD WORK SET, K-FITTING1

8 THIS ROW765432

52 THIS ROW515049484746

59 THIS ROW585756555453

77 THIS ROW767574

2712.

306.

814X

1/3

2814.

29 14.

38 THIS ROW373635343332

45 THIS ROW444342414039

73 THIS ROW727170696867

26 12.

C

D

8 7 6 5 4 3 1

D

C

A

12345678

APPROVEDDESCRIPTIONREVZONE

REVISION HISTORY

CHECKED

SEE SHEET 1 FOR NOTES AND PARTS LIST

96916D 18D11879

DAISIZE

SCALE REF SHEET

REVDWG NO.

FILE NO.: 4.

DRAWN

CHECKED

ENGINEER

T.BRITTINGHAM 07-09-2018

NAVAL AIR DEPOT

U.S. MARINE CORPS AIR STATION

CHERRY POINT, NC

4.0\4.0\4.8\4.8DRAFTING\REL\CSE\18D11879

REVSHDWG NO. 18D11879

B

BUSHING-HANDLE ASSEMBLY8765432

HANDLE ASSEMBLY9

13 14 15 16 17 18

HANDLE10

20°

5.4

.25 STOCK

1.00

7.4°2X

R .62

1.00

R .50

1.62

.05 RADIUS ALL AROUND

HANDLE EDGE

O .7500

.7495 THRU

sO.780 X 90v (NS AND FS)

GUIDE

SCALE 3/1

11 8.

.055

.250

R .010

.010 X 45v

.500-20 UNF-2A-LH

O .875 STOCK

O .7515 .7510

9.

9.

41/1

THD RELIEF O.435 X .15 WIDE

WITH R .01 FILLET

2X .036 X 45v

.711

5.

ETCH OR ENGRAVE NOMENCLATURE FROM

TABLE 1 FOR RESPECTIVE FIND NO. IAW

MIL-STD-130 IN .15-INCH-HIGH CHARACTERS

AT APPROXIMATE LOCATION SHOWN.

FIND NO. NOMENCLATURE

‐2 3/16" NOMINAL

‐3 3/16" 1ST OVERSIZE

‐4 3/16" 2ND OVERSIZE

‐5 1/4" NOMINAL

‐6 1/4" 1ST OVERSIZE

‐7 1/4" 2ND OVERSIZE

‐8 5/16" NOMINAL

TABLE 1

O.140 THRU

sO .625 X 90v

C

D

8 7 6 5 4 3 1

D

C

A

12345678

APPROVEDDESCRIPTIONREVZONE

REVISION HISTORY

CHECKED

SEE SHEET 1 FOR NOTES AND PARTS LIST

96916D 18D11879

DAISIZE

SCALE REF SHEET

REVDWG NO.

FILE NO.: 4.

DRAWN

CHECKED

ENGINEER

T.BRITTINGHAM 07-09-2018

NAVAL AIR DEPOT

U.S. MARINE CORPS AIR STATION

CHERRY POINT, NC

4.0\4.0\4.8\4.8DRAFTING\REL\CSE\18D11879

REVSHDWG NO. 18D11879

B

25 SHIELDING PLATE

R .622X

1.62

40° sOB SEE TABLE 3

OC SEE TABLE 3

TABLE 3

.063 STOCK

242322212019

1.25

.69

O .88 STOCK

2X .02 X 45v 45°

.677

.500

1.3

R .10

OA SEE TABLE 2

.34

SECTION A-A

.500-20 UNF-2B-LH

.120.2525 .2520O

.130

.126O THRU

.270

TABLE 2

LOCATOR

SCALE 3/1

18171615141312

PART NO.

18D11879‐12 0.188

18D11879‐13 0.201

18D11879‐14 0.217

18D11879‐15 0.248

18D11879‐16 0.264

18D11879‐17 0.279

18D11879‐18 0.310

8.

A

A

9.

7.

51/1

ETCH OR ENGRAVE THE RESPECTIVE PART

NUMBER FROM TABLE 2 IN .10-INCH-HIGH

CHARACTERS APPROXIMATELY AS SHOWN

5.5

.30

UNDERCUT O.531 X .120 WIDE

WITH R .01 FILLET

2X .020 X 90v

1.00

ETCH OR ENGRAVE NOMENCLATURE FROM

TABLE 3 FOR RESPECTIVE FIND NO. IAW

MIL-STD-130 IN .15-INCH-HIGH CHARACTERS

AT APPROXIMATE LOCATION SHOWN.

5.

.02 X 45v

FIND NO. NOMENCLATURE

‐19 3/16" NOMINAL 0.225 0.180

‐20 3/16" 1ST OVERSIZE 0.234 0.189

‐21 3/16" 2ND OVERSIZE 0.249 0.204

‐22 1/4" NOMINAL 0.283 0.238

‐23 1/4" 1ST OVERSIZE 0.290 0.245

‐24 1/4" 2ND OVERSIZE 0.306 0.261

‐25 5/16" NOMINAL 0.338 0.293

C

D

8 7 6 5 4 3 1

D

C

A

12345678

APPROVEDDESCRIPTIONREVZONE

REVISION HISTORY

CHECKED

SEE SHEET 1 FOR NOTES AND PARTS LIST

96916D 18D11879

DAISIZE

SCALE REF SHEET

REVDWG NO.

FILE NO.: 4.

DRAWN

CHECKED

ENGINEER

T.BRITTINGHAM 07-09-2018

NAVAL AIR DEPOT

U.S. MARINE CORPS AIR STATION

CHERRY POINT, NC

4.0\4.0\4.8\4.8DRAFTING\REL\CSE\18D11879

REVSHDWG NO. 18D11879

B

2.505X 2.50

1.35

.95

1.80

1.50

.95

7.50

.85

LOWER DUNNAGE26

A

DETAIL A

40°

2.07X

R .5014X

.107X

8.002X

6.307X

.806X

7X `1.25

5.6

.808X R .402X 8X `.50

B

DETAIL B

1.15

R .252X .508X

8X `.50

.6010X

2.355X

2.9010X

4.655X

2.524X

4.022X

.224X

1.722X

.1810X

.2410X

.605X

.406X

.094X

.204X

.382X

10.

O 1.507X `6.50

O .6521X `6.00

R .2042X `.50

(THUMB HOLES LOCATED

APPROXIMATELY AS SHOWN)

O 1.607X `.80 O.40 `5.00

O 1.507X `.50

R .2514X `.50

(THUMB HOLES LOCATED

APPROXIMATELY AS SHOWN)

11.4X

O 1.554X `1.50 O.50 `4.00

R .258X `.50

(THUMB HOLES LOCATED

APPROXIMATELY AS SHOWN)

61/2

7X ` .50

4.00 6.00 2.50

5.00

.38 1.24

1.50

.38

`2.0

`1.62

`.50

R .502X `.50

(THUMB HOLES LOCATED

APPROXIMATELY AS SHOWN)

5.53

2.50

C

D

8 7 6 5 4 3 1

D

C

A

12345678

APPROVEDDESCRIPTIONREVZONE

REVISION HISTORY

CHECKED

SEE SHEET 1 FOR NOTES AND PARTS LIST

96916D 18D11879

DAISIZE

SCALE REF SHEET

REVDWG NO.

FILE NO.: 4.

DRAWN

CHECKED

ENGINEER

T.BRITTINGHAM 07-09-2018

NAVAL AIR DEPOT

U.S. MARINE CORPS AIR STATION

CHERRY POINT, NC

4.0\4.0\4.8\4.8DRAFTING\REL\CSE\18D11879

REVSHDWG NO. 18D11879

B

71/1

16.00

4.50

12.50

7.50

UPPER DUNNAGE

SCALE 1/5

27 10.

` 1.0

2X ` .1

INVENTORY PLACARD

(PHOTOGRAPHICALLY PRINT OR ETCH ITEM NUMBERS IN .12‐INCH‐HIGH CHARACTERS FOR THE RESPECTIVE CUTOUTS

APPROXIMATELY AS SHOWN. CUTOUTS ARE SCALED 1/2 TO THE DIMENSIONS OF FN 26)

28 13.

4.50

ITEM PART NUMBER NOMENCLATURE

1 18D11879-2 BUSHING-HANDLE ASSEMBLY, 3/16" NOMINAL

2 18D11879-3 BUSHING-HANDLE ASSEMBLY, 3/16" 1ST OVERSIZE

3 18D11879-4 BUSHING-HANDLE ASSEMBLY, 3/16" 2ND OVERSIZE

4 18D11879-5 BUSHING-HANDLE ASSEMBLY, 1/4" NOMINAL

5 18D11879-6 BUSHING-HANDLE ASSEMBLY, 1/4" 1ST OVERSIZE

6 18D11879-7 BUSHING-HANDLE ASSEMBLY, 1/4" 2ND OVERSIZE

7 18D11879-8 BUSHING-HANDLE ASSEMBLY,5/16" NOMINAL

8 CBSD-4-4-N-1 PRE-REAM DRILL BIT, 3/16" NOMINAL

9 CBSD-6-0-N-1 PRE-REAM DRILL BIT, 3/16" 1ST OVERSIZE

10 CBSD-6-1-N-1 PRE-REAM DRILL BIT, 3/16" 2ND OVERSIZE

11 CBSD-6-3-N-1 PRE-REAM DRILL BIT, 1/4" NOMINAL

12 CBSD-8-0-N-1 PRE-REAM DRILL BIT, 1/4" 1ST OVERSIZE

13 CBSD-8-1-N-1 PRE-REAM DRILL BIT, 1/4" 2ND OVERSIZE

14 CBSD-8-3-N-1 PRE-REAM DRILL BIT, 5/16" NOMINAL

15 CBSR-4-4-N-1 PRE-COLD WORK REAMER, 3/16" NOMINAL

16 CBSR-6-0-N-1 PRE-COLD WORK REAMER, 3/16" 1ST OVERSIZE

17 CBSR-6-1-N-1 PRE-COLD WORK REAMER, 3/16" 2ND OVERSIZE

18 CBSR-6-3-N-1 PRE-COLD WORK REAMER, 1/4" NOMINAL

19 CBSR-8-0-N-1 PRE-COLD WORK REAMER, 1/4" 1ST OVERSIZE

20 CBSR-8-1-N-1 PRE-COLD WORK REAMER, 1/4" 2ND OVERSIZE

21 CBSR-8-3-N-1 PRE-COLD WORK REAMER, 5/16" NOMINAL

22 CBR-4-4-N-1-.1910 FINISH REAMER, 3/16" NOMINAL

23 CBR-6-0-N-1-.2040 FINISH REAMER, 3/16" 1ST OVERSIZE

24 CBR-6-1-N-1-.2200 FINISH REAMER, 3/16" 2ND OVERSIZE

25 CBR-6-3-N-1-.2510 FINISH REAMER, 1/4" NOMINAL

26 CBR-8-0-N-1-.2670 FINISH REAMER, 1/4" 1ST OVERSIZE

27 CBR-8-1-N-1-.2820 FINISH REAMER, 1/4" 2ND OVERSIZE

28 CBR-8-3-N-1-.3130 FINISH REAMER, 5/16" NOMINAL

29 CBM-4-4-N-1-30-V1 MANDREL, 3/16" NOMINAL

30 CBM-6-0-N-1-30-V1 MANDREL, 3/16" 1ST OVERSIZE

31 CBM-6-1-N-1-30-V1 MANDREL, 3/16" 2ND OVERSIZE

32 CBM-6-3-N-1-30-V1 MANDREL, 1/4" NOMINAL

33 CBM-8-0-N-1-30-V1 MANDREL, 1/4" 1ST OVERSIZE

34 CBM-8-1-N-1-30-V1 MANDREL, 1/4" 2ND OVERSIZE

35 CBM-8-3-N-1-30-V1 MANDREL, 5/16" NOMINAL

36 CBMG-4-4-N MANDREL GAGE, 3/16" NOMINAL

37 CBMG-6-0-N MANDREL GAGE, 3/16" 1ST OVERSIZE

38 CBMG-6-1-N MANDREL GAGE, 3/16" 2ND OVERSIZE

39 CBMG-6-3-N MANDREL GAGE, 1/4" NOMINAL

40 CBMG-8-0-N MANDREL GAGE, 1/4" 1ST OVERSIZE

41 CBMG-8-1-N MANDREL GAGE, 1/4" 2ND OVERSIZE

42 CBMG-8-3-N MANDREL GAGE, 5/16" NOMINAL

43 MEN-14A-0601F NOSECAP, 3/16" NOMINAL THRU 2ND OVERSIZE

44 MEN-14A-0623F NOSECAP, 1/4" NOMINAL

45 MEN-14A-0801F NOSECAP, 1/4" 1ST AND 2ND OVERSIZE

46 MEN-14A-0823F NOSECAP, 5/16" NOMINAL

47 18D11879-19 SHIELDING PLATE, 3/16" NOMINAL

48 18D11879-20 SHIELDING PLATE, 3/16" 1ST OVERSIZE

49 18D11879-21 SHIELDING PLATE, 3/16" 2ND OVERSIZE

50 18D11879-22 SHIELDING PLATE, 1/4" NOMINAL

51 18D11879-23 SHIELDING PLATE, 1/4" 1ST OVERSIZE

52 18D11879-24 SHIELDING PLATE, 1/4" 2ND OVERSIZE

53 18D11879-25 SHIELDING PLATE, 5/16" NOMINAL

54 CBG-4-4-N-1 COMBINATION GAGE, 3/16" NOMINAL

55 CBG-6-0-N-1 COMBINATION GAGE, 3/16" 1ST OVERSIZE

56 CBG-6-1-N-1 COMBINATION GAGE, 3/16" 2ND OVERSIZE

57 CBG-6-3-N-1 COMBINATION GAGE, 1/4" NOMINAL

58 CBG-8-0-N-1 COMBINATION GAGE, 1/4" 1ST OVERSIZE

59 CBG-8-1-N-1 COMBINATION GAGE, 1/4" 2ND OVERSIZE

60 CBG-8-3-N-1 COMBINATION GAGE, 5/16" NOMINAL

61 HP-20 MANUAL PULLER

62 - RATCHET WRENCH

13.00

.06 STOCK

8.00

TOOL REFERENCE TABLE

(PHOTOGRAPHICALLY PRINT OR ETCH IN .12‐INCH‐HIGH

CHARACTERS APPROXIMATELY AS SHOWN)

29 13.

3.50

R 1.002X

2.00

11.4X

14.00

9.00

.06 STOCK

R .504X

R .504X

1.50

4.50

R .504X

8.00

6.50

6.50

11.4X

R .254X