Letter RFP SPRRA2-22-R-0029 - LM LTC SPARES (Initial Population 17 NSNs).pdf

DEFENSE LOGISTICS AGENCY

Aviation

5201 MARTIN ROAD

Redstone Arsenal, Alabama 35898

IN REPLY

REFER

DLA AHCA

August 12, 2022

Lockheed Martin Corporation

5600 W Sand Lake Rd

MP 125

Orlando, FL 32819-8907

RE: Letter Request for Proposal SPRRA2-22-R-0029

Mr. Garrett Laustra, The Defense Logistics Agency (DLA) wishes to add a new subsumable contract to the Captains of Industry

(COI) contract, SPE4AX-22-D-9000 which will include an initial population of seventeen (17) National

Stock Numbers (NSNs). These NSNs will support the Hellfire Missile Weapon System. See Enclosure 1, “Initial Population and Identification of Requirements”.

DLA Contracting Team Identification:

Jennifer Triolo, DLA Aviation- Huntsville Contracting Officer

E-mail: jennifer.triolo@dla.mil, Phone: (256) 303-3127

Kiaunna Blevins, DLA Aviation- Huntsville Contract Specialist

E-mail: kiaunna.blevins@dla.mil, Phone: (256) 214-9518

A. Please adhere to the following timelines:

1. Indicate your intention to provide a responsive add-on proposal to this RFP in writing within five (5) business days. It is requested that a negative response be accompanied by an explanation. Responses shall be provided to the contracting team identified above.

2. Your response is requested as soon as possible. If you choose to submit an add-on proposal, it shall be submitted before 4:00 p.m. Central Standard Time (CST), October

15, 2022 mailto:jennifer.triolo@dla.mil, mailto:kiaunna.blevins@dla.mil, B. Instructions:

1. The Captains of Industry contract (SPE4AX-22-D-9000) shall govern the

Contractor’s and Government’s rights and obligations.

2. Contract clauses are governed by the COI contract. However, the COI contract allows for clauses to be removed at the subsumable level. If Lockheed Martin takes exception to any clauses within the COI, both parties will discuss and reach an agreement to remove any non-applicable clauses prior to award.

3. This RFP is not an authorization to start work.

4. Please ensure that you read the entire RFP, prior to submitting your proposal. Your proposal shall be in full compliance with the instructions of this RFP.

5. The Proposal must be certified to the 3-Year best estimated quantity (BEQ), which is determined as the highest priced alternative to the Government.

6. Your proposal shall remain valid for a minimum of one hundred and eighty (180) days from receipt by the government.

C. Proposal Content/Cost/Price Supporting Documentation. At a minimum your proposal shall include the following:

1. The Government contemplates Firm-Fixed-Pricing for this add-on Subsumable contract in accordance with the overarching basic contract, and requests pricing for three (3) years.

This is an RFP for NSN support requirements generated by the Tactical Aviation and

Grounds Munitions (TAGM) Project Office to be used on the Hellfire Missile Weapon

System which includes, but is not limited to, the JAGM, ROMEO, M36E7, and M299 programs.

2. The offeror shall prepare one summary schedule. Along with the summary schedule, the offeror shall provide fully supportable cost data which substantiates the offeror’s summary schedule for the part numbers (P/Ns). Submission must include working excel formulas, if applicable. Submission shall be in accordance with FAR 15.408, Table 15-2, Instructions for Submitting Cost/Price Proposals When Certified Cost or Pricing Data are required.

Back up documentation shall detail the labor categories to be used, labor hours proposed by category, material and equipment cost, and a total cost breakdown. The offeror shall also provide supporting cost/price documentation for all proposed subcontractors, to include the proposed type of subcontract.

a. To comply with this solicitation, the offeror is required to price for the following Fiscal Years: Fiscal Year 2023 (FY23) through Fiscal Year

2025 (FY25).

b. Please price for the best estimated quantity (BEQ) for all seventeen (17)

NSNs for FY23, FY24, and FY25. Please complete Enclosure 4, “Pricing and Delivery Schedule Years 1-3” to include your proposed prices.

c. Per FAR 15.408 Table 15-2, cost analyses must be performed by the offeror for subcontracts identified in the Consolidated Bill of Materials as having total proposed pricing that exceeds the regulatory threshold indicated in FAR Part

15.403-4, Requiring Certified Cost or Pricing Data for the 3-year BEQs only.

Fair and reasonable subcontractor analysis in accordance with FAR 15.404-

3(b) Subcontract Pricing Considerations shall be provided for the 3-year BEQs only.

d. The government did not provide separate Subcontract Line Item Numbers (SLINs) to accommodate items that may require reusable shipping containers. However, if an item requires a reusable shipping container, a SLIN may be added to allow the offeror to price the item with a shipping container. The offeror shall propose the most expeditious delivery schedule for each item.

e. The Government’s requested delivery schedule is detailed in Enclosure 4. Please complete Enclosure 4, “Pricing and Delivery Schedule Years 1-3” to include your proposed delivery schedules.

f. A First Article Test (FAT) is required for the majority of the 17 NSNs within the initial population list. If Lockheed Martin wishes to request a FAT Waiver, please fill out a FAT Waiver Worksheet (Enclosure 3) and submit back to us PRIOR to your proposal. For any P/Ns which have been in continuous production within the past three years, please submit documentation with the contract numbers associated with those P/Ns to expedite the FAT waiver process.

g. An un-sanitized cost break-down (all cost information, all rates/dollars) shall also be provided in a Microsoft Excel File.

h. In support of the proposed Indirect Expense Rates, RTN, IOTs and its subcontractor(s) shall provide documentation of the most recent Indirect

Expense Rates, to include, at least one of the following (A, B, or C):

A. Forward Pricing Rate Agreements (FPRAs) with DCAA or DCMA

B. Forward Pricing Rate Recommendations (FPRR) from DCAA or DCMA

C. Forward Pricing Rate Proposal (FPRP), Approved Provisional Rates

Proposal or other statement of current rates including three (3) years of

Incurred Cost Submissions to DCAA detailing pools and bases (by expense accounts) information which validates the calculations or three (3) years historical actual detailing pools and bases (by expense accounts) information which validates the calculations.

Note: The rates reflected in the FPRA, FPRR, FPRP, Approved Provisional

Rates Proposal or other statement of current rates shall directly match the proposed rates as detailed in the proposal. If the rates do not match, the offeror shall provide sufficient detail explaining how the proposed rates are realistic.

i. Identify key business unit personnel related to contracting, technical and pricing questions and known DCMA or DCAA business unit points of contact (POCs) to expedite the question/review process.

j. In accordance with FAR clause 52.215-22, Limitation on Pass-Through Charges –

Identification of Subcontract Effort, if Lockheed Martin intends to subcontract more than 70 percent of the total cost of work to be performed under the resulting add-on, Lockheed Martin shall identify in its proposal a description of the value-added provided by Lockheed Martin as related to the work to be performed by the subcontractor(s) as defined by FAR clause 52.215-23, Limitations on Pass-

Through Charges.

k. Lockheed Martin shall identify and address in its proposal all actual or potential

Organizational Conflicts of Interests (OCIs), per FAR 9.5, or state that there are no known potential OCIs. If any actual or potential OCIs are identified, then

Lockheed Martin shall submit a mitigation plan.

l. All communications SHALL be submitted in writing ONLY AND directly to both the contracting officer and contracting specialist identified on the first page of this RFP. Lockheed Martin shall not contact any other Government personnel other than the person(s) identified above. Contacting any

Government personnel other than the individual(s) identified above could result in an organizational conflict of interest (OCI).

m. No assumptions, terms, conditions, caveats or exceptions submitted within your proposal, in response to this RFP, will be accepted or incorporated into the basic contract. All assumptions shall be addressed and/or resolved through the use of the question-and-answer period.

n. Lockheed Martin shall submit their Small Business Plan with their proposal as a separate document SBxxxx.doc. This enclosure will be used to ensure Lockheed

Martin is on track to meet the goals established in the base contract.

o. This document contains technical data whose export is restricted by the Arms

Export Control Act (Title 22, U.S.C., SEC 2751 ET SEQ.) or Executive Order

12470. Violation of these export laws are subject to severe criminal penalties.

p. Effective August 13, 2020, the offeror, by submission of its quotation, represents it: 1) will not provide covered telecommunications equipment or services to the Government in the performance of any contract, subcontract or other contractual instrument resulting from this solicitation in accordance with

FAR 52.204-24(d)(1); 2) does not use covered telecommunications equipment or services, or use any equipment, system, or service that uses covered telecommunications equipment or services IAW FAR 52.204-24(d)(2); and 3) does not provide covered defense telecommunications equipment or services as part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument IAW

DFARS 252.204-7016(c).

Be advised; however, that this requirement has been advertised in SAM.gov website for viewing by the general public. In the event another supplier indicates interest in responding to the requirement as a result of viewing the synopsis, a formal solicitation will be issued to accommodate that supplier.

If you have any questions, feel free to contact Kiaunna Blevins and/or Jennifer Triolo identified on the first page of this RFP.

Sincerely, Jennifer Triolo

Contracting Officer

E-mail: jennifer.triolo@dla.mil

Phone: (256) 303-3127

Enclosures:

1. Initial Population and Identification of Requirements

2. Packaging Requirements (17 NSNs)

3. FAT Waiver Worksheet

4. Pricing and Delivery Schedule Years 1-3 (Initial Population 17 NSNs) mailto:jennifer.triolo@dla.mil

This information/supporting documentation is part of your request.

Contact the buyer if you have any questions about the acquisition offer/quote requirements.

FIRST ARTICLE WAIVER WORKSHEET

Request for Information and Supporting Documentation

BUYER'S NAME

Revision E 12 March 2020

1. CURRENT ACQUISITION INFORMATION:

NOUNPART #

CONTRACTOR NAME

NSN

TOP DRAWING #

SOLICITATION/CONTRACT # CONTRACTOR CAGE

REVISION LEVEL

2. TYPE OF REQUEST:

Full Waiver: Includes waiver of all First Article Testing as required by the TDP, contract and/or solicitation.

Partial Waiver: Includes waiver of only a specific test(s) of the First Article Test requirement as required by the Technical Data Package (TDP), contract and/or solicitation. Partial waivers not acceptable on Aviation items.

TDP Reference(s) of test(s) to be waived: (Please be specific and reference specification paragraph and/or drawing note as appropriate).

3. JUSTIFICATION TO SUPPORT WAIVER REQUEST: (Check and complete all that apply)

Remarks (if needed)

A) CURRENT OR RECENT PRODUCTION

YES NOCRITICAL SAFETY ITEM (CSI)

1) Has the item been manufactured and delivered for a DoD contract within the past 3 years?

3) If past DoD contract delivery was sub-tier to an OEM, is this direct DoD contract delivery utilizing the same manufacturing planning?

4) Since the last delivery for a DoD contract, has there been any manufacturing changes to the following:

Technical Data, Drawings, or Configuration?

2) For the past delivery contracts cited above, where was the item actually manufactured?

NO, continue to section 3B.

YES, provide date, contract number, and substantiation in Remarks.

Date Contract #

IN-HOUSE PRODUCTION, Provide copies of DD-250s, work orders, proof of installation on delivered end item, or other substantiation of past delivery within the past 3 years SUB-TIER SUPPLIER/VENDOR, Provide copies of purchase orders, shipping receipts of delivery, or other substantiation of sub-tier past delivery; in addition to DD-250s of end item delivery, within the past 3 years

Frozen planning, processes, procedure?

Facilities or location?

Equipment or tooling?

Sub-tier suppliers or processors?

N/A NO YES,Provide revision level/date and details in Remarks

N/A YES

NO, provide planning revision level/date in Remarks

N/A NO YES,Provide revision level/date and details in Remarks

N/A NO YES,Provide details in Remarks

N/A NO YES,Provide details in Remarks

N/A NO YES,Provide company/CAGE&qualification in remarks

Provide a full explanation justifying why duplicate testing is unnecessary:

National Stock Number

Contract No.

Date of First Article Approval

Nomenclature

Part Number

Remarks:

If NO, please describe the differences in detail below and include any considerations these changes will require for the First Article Test waiver request

Date of FAT Approval

Issuing Government Agency

- Was the above contract manufactured at the same facilities using the same equipment, processes, procedures, and subcontractors in which the current item will be produced?

B) - Has there been a successful completion of a FAT for the same item on a contract within the past three years and the item tested per the same requirements as those referenced in the solicitation and/or contract? YES, complete fill-ins >

NO, enter remarks below

YES, proceed to Section 4

NO, enter remarks below

C) - Has there been a successful performance of a first article test on the next higher assembly within the past three (3) years?

A waiver may be requested in order to eliminate duplication of testing on the lower assembly.

YES, complete fill-ins below on Next Higher Assembly

NO, continue to 3.D.

- Was the next higher assembly manufactured at the same facilities using similar equipment, processes, and procedures in which the current item will be produced? YES, proceed to Section 4.

NO, explain below

Remarks:

National Stock Number

Date of First Article Approval

Nomenclature

Part Number

D) - Has there been a successful completion of a First Article for a similar item on a contract within the past three (3) years and the item tested per the same requirements as those referenced in the solicitation and/or contract.

YES, complete fill-ins below on similar item

NO, continue to 3.E.

- Was the similar item manufactured at the same facilities using similar equipment, processes, and procedures in which the current item will be produced? YES, proceed to Section 4.

NO, explain below

Other: A waiver or partial waiver of the FAT is being requested based on the following:

Please be specific and attach supporting documentation* as appropriate:E)

4. OTHER PERTINENT INFORMATION

There are or have been quality issues (history) for this or similar items such as Quality Escapes, Product Quality Deficiency Reports (PQDRs), Corrective Action Requests, and/or show-cause letters. Please discuss/provide resolutions below:A)

There have been changes to the manufacturing data (e.g. drawing revisions that change materials, dimensions, processes, inspection or testing requirements) or subcontractors used to manufacture the items successfully in the past.

Please describe below.

B)

There have been Requests for Waiver/Deviation submitted or Material Review Board (MRB) actions related to manufacture of this item. Please describe below. C)

5. ATTACH SUPPORTING DOCUMENTATION

6. SUBMISSION

The submitter, by signing the below certifies that the above statements are true and correct.

Please provide printed name, signature, company address, and phone number where you can be reached. Again, the signer must be an agent of the company.

PRINTED NAME

COMPANY NAME

PHONE NUMBER

TITLE

COMPANY ADDRESS

Signature

*See the solicitation/contract for information on submitting supporting documentation, as well as, additional requirements regarding First Article Test Waiver requests.

The add, open, and remove buttons are the preferred attachment method.

If attachments do not open, please go to the attachment window by opening View>Show/Hide>Navigation Panes> Attachments to save the attachments to local computer for viewing.

This information/supporting documentation is part of your request.

Contact the buyer if you have any questions about the acquisition offer/quote requirements.

FIRST ARTICLE WAIVER WORKSHEET

Request for Information and Supporting Documentation

Revision E

12 March 2020

1. CURRENT ACQUISITION INFORMATION:

2. TYPE OF REQUEST:

3. JUSTIFICATION TO SUPPORT WAIVER REQUEST: (Check and complete all that apply)

Page of

A)

CURRENT OR RECENT PRODUCTION

1) Has the item been manufactured and delivered for a DoD contract within the past 3 years?

3) If past DoD contract delivery was sub-tier to an OEM, is this direct DoD contract delivery utilizing the same manufacturing planning?

4) Since the last delivery for a DoD contract, has there been any manufacturing changes to the following:

Technical Data, Drawings, or Configuration?

2) For the past delivery contracts cited above, where was the item actually manufactured?

Frozen planning, processes, procedure?

Facilities or location?

Equipment or tooling?

Sub-tier suppliers or processors?

Page of

- Was the above contract manufactured at the same facilities using the same equipment, processes, procedures, and subcontractors in which the current item will be produced?

B)

- Has there been a successful completion of a FAT for the same item on a contract within the past three years and the item tested per the same requirements as those referenced in the solicitation and/or contract?

C)

- Has there been a successful performance of a first article test on the next higher assembly within the past three (3) years?

A waiver may be requested in order to eliminate duplication of testing on the lower assembly.

- Was the next higher assembly manufactured at the same facilities using similar equipment, processes, and procedures in which the current item will be produced?

D)

- Has there been a successful completion of a First Article for a similar item on a contract within the past three (3) years and the item tested per the same requirements as those referenced in the solicitation and/or contract.

- Was the similar item manufactured at the same facilities using similar equipment, processes, and procedures in which the current item will be produced?

Page of

E)

4. OTHER PERTINENT INFORMATION

A)

B)

C)

5. ATTACH SUPPORTING DOCUMENTATION

6. SUBMISSION

The submitter, by signing the below certifies that the above statements are true and correct. Please provide printed name, signature, company address, and phone number where you can be reached. Again, the signer must be an agent of the company.

*See the solicitation/contract for information on submitting supporting documentation, as well as, additional requirements regarding First Article Test Waiver requests.

The add, open, and remove buttons are the preferred attachment method.

If attachments do not open, please go to the attachment window by opening

View>Show/Hide>Navigation Panes>

Attachments to save the attachments to local computer for viewing.

8.2.1.4029.1.523496.503679

Buyers-name:

NOUN:

PART_NO:

CONTARCTOR-NAME:

NSN:

TOP-DRAWING:

COntarct-NO:

CAGE:

REVISION:

FULL-WAIVER:

PART-WAIVER:

A2-REMARKS:

CurrentPage: 1.00000000

CurrentPage: 2.00000000

CurrentPage: 3.00000000

PageCount: 3.00000000

PageCount: 3.00000000

PageCount: 3.00000000

ResetButton1:

A3REMARKS:

CSI_Y:

CSI_N:

TextField8:

C3_NORADIO:

C3YESRADIO:

date3:

C3_explanation:

C3-NSN:

C3-ContractNO:

C3-FATDATEAPPROVAL:

C3-NOMENCALTURE:

C3-PN:

C3-REMARKS:

B3RemarksforNO:

FATAPPROVALDATE:

CONTRACTNO:

IGA:

B3YESRADIO:

B3_NORADIO:

B3-NOREMARKS2:

C3YESRADIO2:

C3_NORADIO2:

D3_Remarks:

D3-NSN:

D3-ContractNO:

D3-FATDATEAPPROVAL:

D3-NOMENCALTURE:

D3-PN:

D3YESRADIO:

D3_NORADIO:

D3YESRADIO2:

D3_NORADIO2:

NumericField1: 0

TextField7:

SignatureField1:

Button1:

Button2:

ListBox1:

Button3:

RadioButtonStyle1:

RadioButtonStyle2:

RadioButtonStyle3:

RadioButtonStyle4:

RadioButtonStyle5:

RadioButtonStyle6:

RadioButtonStyle7:

RadioButtonStyle8:

YEAR 1 -- AA

Identification of Requirements BEQ Production Lead Time Desired Lockheed Martin Proposed

CLIN CLIN ORDER YEAR CAGE NSN P/N NOMENCLATURE YR 1 FAT Req'd? Without FAT (DACA) With FAT (DACA) TOTAL UNIT PRICE TOTAL NUMBER PER MONTH TO BE DELIVERED DELIVERY (MONTHS AFTER DATE OF AWARD) NOTES

1001 AA 04939 5998-01-577-1892 13556272 CIRCUIT CARD ASSEMB 3 YES 780 1170

1002 AA 04939 5998-01-576-9946 13556302 CIRCUIT CARD ASSEMB 3 YES 360 540

1003 AA 04939 1336-01-596-4913 13556353 WARHEAD SECTION,GU 3 YES 360 540

1004 AA 04939 5998-01-588-1593 13556368 CIRCUIT CARD ASSEMB 3 NO 1380 2070

1005 AA 04939 1337-01-507-7460 13587584 ROCKET MOTOR ASSY 3 YES 360 540

1006 AA 04939 1336-01-595-4646 13556393 PRECURSOR WH, TACI 3 NO 360 N/A

1007 AA 04939 1420-01-611-9105 13556524 TRAINER, GUIDANCE SE 3 NO 480 N/A

1008 AA 04939 1440-01-484-9151 13593120 ELECTRONIC ASSEMBLY 36 YES 780 1170

1009 AA 04939 5998-01-495-1141 13593140 CIRCUIT CARD ASSEMB 84 YES 720 1080

1010 AA 04939 5995-01-495-6043 13593138 WIRING HARNESS,BRAN 2 YES 990 1485

1011 AA 04939 1420-01-678-4173 13674115-019 SEEKER SECTON ASSY 3 YES 450 675

1012 AA 04939 5998-01-669-9884 13674477-009 ELEC COMPONENT ASSY 3 YES 450 675

1013 AA 04939 1420-01-593-8201 13556381 CONTROL SECTION,GUI 5 YES 360 540

1014 AA 04939 1420-01-673-9461 13674110-049 GDNCE SECTION ASSY 3 NO 450 675

1015 AA 04939 5998-01-495-1145 13593170 ELECTRONIC COMPONEN 2 YES 1080 1620

1016 AA 04939 1410-01-686-9184 13688209 SENSOR GROUP 6 YES 360 N/A

1017 AA 04939 1420-01-686-9216 13688208 GYRO OPTICS ASSEMBL 3 YES 360 N/A

0018C1

0019B1

0020B1

0021C1

0022C1

0023C1

0024C1

0025C1

0026B1

YEAR 2 -- AB

Identification of Requirements BEQ Production Lead Time Desired Lockheed Martin Proposed

CLIN CLIN ORDER YEAR CAGE NSN P/N NOMENCLATURE YR 2 FAT Req'd? Without FAT (DACA) With FAT (DACA) TOTAL UNIT PRICE TOTAL NUMBER PER MONTH TO BE DELIVERED DELIVERY (MONTHS AFTER DATE OF AWARD) NOTES

2001 AB 04939 5998-01-577-1892 13556272 CIRCUIT CARD ASSEMB 3 YES 780 1170

2002 AB 04939 5998-01-576-9946 13556302 CIRCUIT CARD ASSEMB 3 YES 360 540

2003 AB 04939 1336-01-596-4913 13556353 WARHEAD SECTION,GU 3 YES 360 540

2004 AB 04939 5998-01-588-1593 13556368 CIRCUIT CARD ASSEMB 3 NO 1380 2070

2005 AB 04939 1337-01-507-7460 13587584 ROCKET MOTOR ASSY 3 YES 360 540

2006 AB 04939 1336-01-595-4646 13556393 PRECURSOR WH, TACI 3 NO 360 N/A

2007 AB 04939 1420-01-611-9105 13556524 TRAINER, GUIDANCE SE 3 NO 480 N/A

2008 AB 04939 1440-01-484-9151 13593120 ELECTRONIC ASSEMBLY 36 YES 780 1170

2009 AB 04939 5998-01-495-1141 13593140 CIRCUIT CARD ASSEMB 60 YES 720 1080

2010 AB 04939 5995-01-495-6043 13593138 WIRING HARNESS,BRAN 2 YES 990 1485

2011 AB 04939 1420-01-678-4173 13674115-019 SEEKER SECTON ASSY 3 YES 450 675

2012 AB 04939 5998-01-669-9884 13674477-009 ELEC COMPONENT ASSY 3 YES 450 675

2013 AB 04939 1420-01-593-8201 13556381 CONTROL SECTION,GUI 5 YES 360 540

2014 AB 04939 1420-01-673-9461 13674110-049 GDNCE SECTION ASSY 3 NO 450 675

2015 AB 04939 5998-01-495-1145 13593170 ELECTRONIC COMPONEN 2 YES 1080 1620

2016 AB 04939 1410-01-686-9184 13688209 SENSOR GROUP 6 YES 360 N/A

2017 AB 04939 1420-01-686-9216 13688208 GYRO OPTICS ASSEMBL 3 YES 360 N/A

0018C1

0019B1

0020B1

0021C1

0022C1

0023C1

0024C1

0025C1

0026B1

YEAR 3 -- AC

Identification of Requirements BEQ Production Lead Time Desired Lockheed Martin Proposed

CLIN CLIN ORDER YEAR CAGE NSN P/N NOMENCLATURE YR 3 FAT Req'd? Without FAT (DACA) With FAT (DACA) TOTAL UNIT PRICE TOTAL NUMBER PER MONTH TO BE DELIVERED DELIVERY (MONTHS AFTER DATE OF AWARD) NOTES

3001 AC 04939 5998-01-577-1892 13556272 CIRCUIT CARD ASSEMB 3 YES 780 1170

3002 AC 04939 5998-01-576-9946 13556302 CIRCUIT CARD ASSEMB 3 YES 360 540

3003 AC 04939 1336-01-596-4913 13556353 WARHEAD SECTION,GU 3 YES 360 540

3004 AC 04939 5998-01-588-1593 13556368 CIRCUIT CARD ASSEMB 3 NO 1380 2070

3005 AC 04939 1337-01-507-7460 13587584 ROCKET MOTOR ASSY 3 YES 360 540

3006 AC 04939 1336-01-595-4646 13556393 PRECURSOR WH, TACI 3 NO 360 N/A

3007 AC 04939 1420-01-611-9105 13556524 TRAINER, GUIDANCE SE 3 NO 480 N/A

3008 AC 04939 1440-01-484-9151 13593120 ELECTRONIC ASSEMBLY 36 YES 780 1170

3009 AC 04939 5998-01-495-1141 13593140 CIRCUIT CARD ASSEMB 60 YES 720 1080

3010 AC 04939 5995-01-495-6043 13593138 WIRING HARNESS,BRAN 2 YES 990 1485

3011 AC 04939 1420-01-678-4173 13674115-019 SEEKER SECTON ASSY 3 YES 450 675

3012 AC 04939 5998-01-669-9884 13674477-009 ELEC COMPONENT ASSY 3 YES 450 675

3013 AC 04939 1420-01-593-8201 13556381 CONTROL SECTION,GUI 5 YES 360 540

3014 AC 04939 1420-01-673-9461 13674110-049 GDNCE SECTION ASSY 3 NO 450 675

3015 AC 04939 5998-01-495-1145 13593170 ELECTRONIC COMPONEN 2 YES 1080 1620

3016 AC 04939 1410-01-686-9184 13688209 SENSOR GROUP 6 YES 360 N/A

3017 AC 04939 1420-01-686-9216 13688208 GYRO OPTICS ASSEMBL 3 YES 360 N/A

0018C1

0019B1

0020B1

0021C1

0022C1

0023C1

0024C1

0025C1

0026B1

YEAR 4 -- AD

Identification of Requirements BEQ Production Lead Time Desired Lockheed Martin Proposed

CLIN CLIN ORDER YEAR CAGE NSN P/N NOMENCLATURE YR 4 FAT Req'd? Without FAT (DACA) With FAT (DACA) TOTAL UNIT PRICE TOTAL NUMBER PER MONTH TO BE DELIVERED DELIVERY (MONTHS AFTER DATE OF AWARD) NOTES

4001 AD 04939 5998-01-577-1892 13556272 CIRCUIT CARD ASSEMB 3

4002 AD 04939 5998-01-576-9946 13556302 CIRCUIT CARD ASSEMB 3

4003 AD 04939 1336-01-596-4913 13556353 WARHEAD SECTION,GU 3

4004 AD 04939 5998-01-588-1593 13556368 CIRCUIT CARD ASSEMB 3

4005 AD 04939 1337-01-507-7460 13587584 ROCKET MOTOR ASSY 3

4006 AD 04939 1336-01-595-4646 13556393 PRECURSOR WH, TACI 3

4007 AD 04939 1420-01-611-9105 13556524 TRAINER, GUIDANCE SE 3

4008 AD 04939 1440-01-484-9151 13593120 ELECTRONIC ASSEMBLY 36

4009 AD 04939 5998-01-495-1141 13593140 CIRCUIT CARD ASSEMB 60

4010 AD 04939 5995-01-495-6043 13593138 WIRING HARNESS,BRAN 2

4011 AD 04939 1420-01-678-4173 13674115-019 SEEKER SECTON ASSY 3

4012 AD 04939 5998-01-669-9884 13674477-009 ELEC COMPONENT ASSY 3

4013 AD 04939 1420-01-593-8201 13556381 CONTROL SECTION,GUI 5

4014 AD 04939 1420-01-673-9461 13674110-049 GDNCE SECTION ASSY 3

4015 AD 04939 5998-01-495-1145 13593170 ELECTRONIC COMPONEN 2

4016 AD 04939 1410-01-686-9184 13688209 SENSOR GROUP 6

4017 AD 04939 1420-01-686-9216 13688208 GYRO OPTICS ASSEMBL 3

0018C1

0019B1

0020B1

0021C1

0022C1

0023C1

0024C1

0025C1

0026B1

YEAR 5 -- AE

Identification of Requirements BEQ Production Lead Time Desired Lockheed Martin Proposed

CLIN CLIN ORDER YEAR CAGE NSN P/N NOMENCLATURE YR 5 FAT Req'd? Without FAT (DACA) With FAT (DACA) TOTAL UNIT PRICE TOTAL NUMBER PER MONTH TO BE DELIVERED DELIVERY (MONTHS AFTER DATE OF AWARD) NOTES

5001 AE 04939 5998-01-577-1892 13556272 CIRCUIT CARD ASSEMB 3

5002 AE 04939 5998-01-576-9946 13556302 CIRCUIT CARD ASSEMB 3

5003 AE 04939 1336-01-596-4913 13556353 WARHEAD SECTION,GU 3

5004 AE 04939 5998-01-588-1593 13556368 CIRCUIT CARD ASSEMB 3

5005 AE 04939 1337-01-507-7460 13587584 ROCKET MOTOR ASSY 3

5006 AE 04939 1336-01-595-4646 13556393 PRECURSOR WH, TACI 3

5007 AE 04939 1420-01-611-9105 13556524 TRAINER, GUIDANCE SE 3

5008 AE 04939 1440-01-484-9151 13593120 ELECTRONIC ASSEMBLY 36

5009 AE 04939 5998-01-495-1141 13593140 CIRCUIT CARD ASSEMB 60

5010 AE 04939 5995-01-495-6043 13593138 WIRING HARNESS,BRAN 2

5011 AE 04939 1420-01-678-4173 13674115-019 SEEKER SECTON ASSY 3

5012 AE 04939 5998-01-669-9884 13674477-009 ELEC COMPONENT ASSY 3

5013 AE 04939 1420-01-593-8201 13556381 CONTROL SECTION,GUI 5

5014 AE 04939 1420-01-673-9461 13674110-049 GDNCE SECTION ASSY 3

5015 AE 04939 5998-01-495-1145 13593170 ELECTRONIC COMPONEN 2

5016 AE 04939 1410-01-686-9184 13688209 SENSOR GROUP 6

5017 AE 04939 1420-01-686-9216 13688208 GYRO OPTICS ASSEMBL 3

0018C1

0019B1

0020B1

0021C1

0022C1

0023C1

0024C1

0025C1

0026B1

YEAR 6 -- AF

Identification of Requirements BEQ Production Lead Time Desired Lockheed Martin Proposed

CLIN CLIN ORDER YEAR CAGE NSN P/N NOMENCLATURE YR 6 FAT Req'd? Without FAT (DACA) With FAT (DACA) TOTAL UNIT PRICE TOTAL NUMBER PER MONTH TO BE DELIVERED DELIVERY (MONTHS AFTER DATE OF AWARD) NOTES

6001 AF 04939 5998-01-577-1892 13556272 CIRCUIT CARD ASSEMB 3

6002 AF 04939 5998-01-576-9946 13556302 CIRCUIT CARD ASSEMB 3

6003 AF 04939 1336-01-596-4913 13556353 WARHEAD SECTION,GU 3

6004 AF 04939 5998-01-588-1593 13556368 CIRCUIT CARD ASSEMB 3

6005 AF 04939 1337-01-507-7460 13587584 ROCKET MOTOR ASSY 3

6006 AF 04939 1336-01-595-4646 13556393 PRECURSOR WH, TACI 3

6007 AF 04939 1420-01-611-9105 13556524 TRAINER, GUIDANCE SE 3

6008 AF 04939 1440-01-484-9151 13593120 ELECTRONIC ASSEMBLY 36

6009 AF 04939 5998-01-495-1141 13593140 CIRCUIT CARD ASSEMB 60

6010 AF 04939 5995-01-495-6043 13593138 WIRING HARNESS,BRAN 2

6011 AF 04939 1420-01-678-4173 13674115-019 SEEKER SECTON ASSY 3

6012 AF 04939 5998-01-669-9884 13674477-009 ELEC COMPONENT ASSY 3

6013 AF 04939 1420-01-593-8201 13556381 CONTROL SECTION,GUI 5

6014 AF 04939 1420-01-673-9461 13674110-049 GDNCE SECTION ASSY 3

6015 AF 04939 5998-01-495-1145 13593170 ELECTRONIC COMPONEN 2

6016 AF 04939 1410-01-686-9184 13688209 SENSOR GROUP 6

6017 AF 04939 1420-01-686-9216 13688208 GYRO OPTICS ASSEMBL 3

0018C1

0019B1

0020B1

0021C1

0022C1

0023C1

0024C1

0025C1

0026B1

YEAR 7 -- AG

Identification of Requirements BEQ Production Lead Time Desired Lockheed Martin Proposed

CLIN CLIN ORDER YEAR CAGE NSN P/N NOMENCLATURE YR 7 FAT Req'd? Without FAT (DACA) With FAT (DACA) TOTAL UNIT PRICE TOTAL NUMBER PER MONTH TO BE DELIVERED DELIVERY (MONTHS AFTER DATE OF AWARD) NOTES

7001 AG 04939 5998-01-577-1892 13556272 CIRCUIT CARD ASSEMB 3

7002 AG 04939 5998-01-576-9946 13556302 CIRCUIT CARD ASSEMB 3

7003 AG 04939 1336-01-596-4913 13556353 WARHEAD SECTION,GU 3

7004 AG 04939 5998-01-588-1593 13556368 CIRCUIT CARD ASSEMB 3

7005 AG 04939 1337-01-507-7460 13587584 ROCKET MOTOR ASSY 3

7006 AG 04939 1336-01-595-4646 13556393 PRECURSOR WH, TACI 3

7007 AG 04939 1420-01-611-9105 13556524 TRAINER, GUIDANCE SE 3

7008 AG 04939 1440-01-484-9151 13593120 ELECTRONIC ASSEMBLY 36

7009 AG 04939 5998-01-495-1141 13593140 CIRCUIT CARD ASSEMB 60

7010 AG 04939 5995-01-495-6043 13593138 WIRING HARNESS,BRAN 2

7011 AG 04939 1420-01-678-4173 13674115-019 SEEKER SECTON ASSY 3

7012 AG 04939 5998-01-669-9884 13674477-009 ELEC COMPONENT ASSY 3

7013 AG 04939 1420-01-593-8201 13556381 CONTROL SECTION,GUI 5

7014 AG 04939 1420-01-673-9461 13674110-049 GDNCE SECTION ASSY 3

7015 AG 04939 5998-01-495-1145 13593170 ELECTRONIC COMPONEN 2

7016 AG 04939 1410-01-686-9184 13688209 SENSOR GROUP 6

7017 AG 04939 1420-01-686-9216 13688208 GYRO OPTICS ASSEMBL 3

0018C1

0019B1

0020B1

0021C1

0022C1

0023C1

0024C1

0025C1

0026B1

YEAR 8 -- AH

Identification of Requirements BEQ Production Lead Time Desired Lockheed Martin Proposed

CLIN CLIN ORDER YEAR CAGE NSN P/N NOMENCLATURE YR 8 FAT Req'd? Without FAT (DACA) With FAT (DACA) TOTAL UNIT PRICE TOTAL NUMBER PER MONTH TO BE DELIVERED DELIVERY (MONTHS AFTER DATE OF AWARD) NOTES

8001 AH 04939 5998-01-577-1892 13556272 CIRCUIT CARD ASSEMB 3

8002 AH 04939 5998-01-576-9946 13556302 CIRCUIT CARD ASSEMB 3

8003 AH 04939 1336-01-596-4913 13556353 WARHEAD SECTION,GU 3

8004 AH 04939 5998-01-588-1593 13556368 CIRCUIT CARD ASSEMB 3

8005 AH 04939 1337-01-507-7460 13587584 ROCKET MOTOR ASSY 3

8006 AH 04939 1336-01-595-4646 13556393 PRECURSOR WH, TACI 3

8007 AH 04939 1420-01-611-9105 13556524 TRAINER, GUIDANCE SE 3

8008 AH 04939 1440-01-484-9151 13593120 ELECTRONIC ASSEMBLY 36

8009 AH 04939 5998-01-495-1141 13593140 CIRCUIT CARD ASSEMB 60

8010 AH 04939 5995-01-495-6043 13593138 WIRING HARNESS,BRAN 2

8011 AH 04939 1420-01-678-4173 13674115-019 SEEKER SECTON ASSY 3

8012 AH 04939 5998-01-669-9884 13674477-009 ELEC COMPONENT ASSY 3

8013 AH 04939 1420-01-593-8201 13556381 CONTROL SECTION,GUI 5

8014 AH 04939 1420-01-673-9461 13674110-049 GDNCE SECTION ASSY 3

8015 AH 04939 5998-01-495-1145 13593170 ELECTRONIC COMPONEN 2

8016 AH 04939 1410-01-686-9184 13688209 SENSOR GROUP 6

8017 AH 04939 1420-01-686-9216 13688208 GYRO OPTICS ASSEMBL 3

0018C1

0019B1

0020B1

0021C1

0022C1

0023C1

0024C1

0025C1

0026B1

YEAR 9 -- AI

Identification of Requirements BEQ Production Lead Time Desired Lockheed Martin Proposed

CLIN CLIN ORDER YEAR CAGE NSN P/N NOMENCLATURE YR 9 FAT Req'd? Without FAT (DACA) With FAT (DACA) TOTAL UNIT PRICE TOTAL NUMBER PER MONTH TO BE DELIVERED DELIVERY (MONTHS AFTER DATE OF AWARD) NOTES

9001 AI 04939 5998-01-577-1892 13556272 CIRCUIT CARD ASSEMB 3

9002 AI 04939 5998-01-576-9946 13556302 CIRCUIT CARD ASSEMB 3

9003 AI 04939 1336-01-596-4913 13556353 WARHEAD SECTION,GU 3

9004 AI 04939 5998-01-588-1593 13556368 CIRCUIT CARD ASSEMB 3

9005 AI 04939 1337-01-507-7460 13587584 ROCKET MOTOR ASSY 3

9006 AI 04939 1336-01-595-4646 13556393 PRECURSOR WH, TACI 3

9007 AI 04939 1420-01-611-9105 13556524 TRAINER, GUIDANCE SE 3

9008 AI 04939 1440-01-484-9151 13593120 ELECTRONIC ASSEMBLY 36

9009 AI 04939 5998-01-495-1141 13593140 CIRCUIT CARD ASSEMB 60

9010 AI 04939 5995-01-495-6043 13593138 WIRING HARNESS,BRAN 2

9011 AI 04939 1420-01-678-4173 13674115-019 SEEKER SECTON ASSY 3

9012 AI 04939 5998-01-669-9884 13674477-009 ELEC COMPONENT ASSY 3

9013 AI 04939 1420-01-593-8201 13556381 CONTROL SECTION,GUI 5

9014 AI 04939 1420-01-673-9461 13674110-049 GDNCE SECTION ASSY 3

9015 AI 04939 5998-01-495-1145 13593170 ELECTRONIC COMPONEN 2

9016 AI 04939 1410-01-686-9184 13688209 SENSOR GROUP 6

9017 AI 04939 1420-01-686-9216 13688208 GYRO OPTICS ASSEMBL 3

0018C1

0019B1

0020B1

0021C1

0022C1

0023C1

0024C1

0025C1

0026B1

Initial Population (17 NSNs)

Identification of Requirements - Spares SPRRA2-22-R-0029

Program PRON NSN NIIN PART NUMBER NOUN Year 1 BEQ Year 2 BEQ Year 3 BEQ Year 4 BEQ Year 5 BEQ Year 6 BEQ Year 7 BEQ Year 8 BEQ Year 9 BEQ Approved Cage Codes NAICS # OF EMPLOYEES AMRC Code AMRC Exp Date FAT Req'd? FAT Waiver? PLT w/out FAT (DACA) PLT w/ FAT (DACA) WARNINGS ON TDPL

ROMEO 16M00182 5998-01-577-1892 015771892 13556272 CIRCUIT CARD ASSEMB 3 3 3 3 3 3 3 3 3 04939 334412 750 3D 4/11/27 YES NO 780 1170 W-A-R-N-I-N-G! DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT

ROMEO 14M00771 5998-01-576-9946 015769946 13556302 CIRCUIT CARD ASSEMB 3 3 3 3 3 3 3 3 3 04939 334412 750 3D 4/11/27 YES NO 360 540 W-A-R-N-I-N-G! DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT

ROMEO 12M00530 1336-01-596-4913 015964913 13556353 WARHEAD SECTION,GU 3 3 3 3 3 3 3 3 3 04939 336414 1250 3N 4/11/27 YES NO 360 540 W-A-R-N-I-N-G! DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT

W-A-R-N-I-N-G! THIS TDPL INDICATES DOCUMENTATION THAT IS CLASSIFIED

ROMEO 12M00491 5998-01-588-1593 015881593 13556368 CIRCUIT CARD ASSEMB 3 3 3 3 3 3 3 3 3 04939 334412 750 3Q 3/22/25 NO YES- Thru 10/22/2022 1380 2070 W-A-R-N-I-N-G! DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT

ROMEO 05M00041 1337-01-507-7460 015077460 13587584 ROCKET MOTOR ASSY 3 3 3 3 3 3 3 3 3 04939 335312 1000 3P 3/21/27 YES NO 360 540 W-A-R-N-I-N-G! THIS ITEM REQUIRES OHM SPECIFICATIONS W-A-R-N-I-N-G! DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT

W-A-R-N-I-N-G! THIS TDPL INDICATES DOCUMENTATION THAT IS CLASSIFIED

ROMEO 22M00125 1336-01-595-4646 015954646 13556393 PRECURSOR WH, TACI 3 3 3 3 3 3 3 3 3 04939 336414 1250 4D 4/18/27 NO N/A 360 N/A W-A-R-N-I-N-G! DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT

M36E7 12M00773 1420-01-611-9105 16119105 13556524 TRAINER, GUIDANCE SE 3 3 3 3 3 3 3 3 3 04939 336419 1000 3Q 3/23/25 NO N/A 480 N/A W-A-R-N-I-N-G! THIS ITEM REQUIRES OHM SPECIFICATIONS W-A-R-N-I-N-G! DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT

W-A-R-N-I-N-G! THIS TDPL INDICATES DOCUMENTATION THAT IS CLASSIFIED

M299 02M00110 1440-01-484-9151 014849151 13593120 ELECTRONIC ASSEMBLY 36 36 36 36 36 36 36 36 36 04939 336415 1250 3Q 3/23/25 YES NO 780 1170 W-A-R-N-I-N-G! DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT

M299 02M00770 5998-01-495-1141 014951141 13593140 CIRCUIT CARD ASSEMB 84 60 60 60 60 60 60 60 60 04939 334412 750 3D 4/9/23 YES NO 720 1080 W-A-R-N-I-N-G! THIS IS A PART NUMBER BUY; NO DOCUMENTATION IS TO BE PROVIDED

M299 02M00393 5995-01-495-6043 014956043 13593138 WIRING HARNESS,BRAN 2 2 2 2 2 2 2 2 2 04939 335931 500 3D 4/5/27 YES NO 990 1485 W-A-R-N-I-N-G! DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT

W-A-R-N-I-N-G! THIS TDPL INDICATES DOCUMENTATION THAT IS CLASSIFIED

JAGM 22M00232 1420-01-678-4173 016784173 13674115-019 SEEKER SECTON ASSY 3 3 3 3 3 3 3 3 3 04939 336419 1000 4P 4/18/27 YES NO 450 675 W-A-R-N-I-N-G! DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT

W-A-R-N-I-N-G! THIS TDPL INDICATES DOCUMENTATION THAT IS CLASSIFIED

JAGM 18M00063 5998-01-669-9884 016699884 13674477-009 ELEC COMPONENT ASSY 3 3 3 3 3 3 3 3 3 04939 334412 750 4D 3/22/23 YES NO 450 675 W-A-R-N-I-N-G! DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT

JAGM 16M00181 1420-01-593-8201 015938201 13556381 CONTROL SECTION,GUI 5 5 5 5 5 5 5 5 5 04939 336319 1000 3D 3/23/27 YES NO 360 540 W-A-R-N-I-N-G! DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT

W-A-R-N-I-N-G! THIS TDPL INDICATES DOCUMENTATION THAT IS CLASSIFIED

JAGM 18M00365 1420-01-673-9461 016739461 13674110-049 GDNCE SECTION ASSY 3 3 3 3 3 3 3 3 3 04939 336419 1000 4P 7/11/27 NO N/A 450 675 W-A-R-N-I-N-G! THIS TDPL INDICATES DOCUMENTATION THAT IS CLASSIFIED

W-A-R-N-I-N-G! THIS IS A PART NUMBER BUY; NO DOCUMENTATION IS TO BE PROVIDED

M299 02M00391 5998-01-495-1145 014951145 13593170 ELECTRONIC COMPONEN 2 2 2 2 2 2 2 2 2 04939 334412 750 3D 4/11/27 YES NO 1080 1620 W-A-R-N-I-N-G! DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT

ROMEO 20M00145 1410-01-686-9184 016869184 13688209 SENSOR GROUP 6 6 6 6 6 6 6 6 6 04939 336414 1250 4D 3/29/26 YES NO 360 N/A W-A-R-N-I-N-G! THIS ITEM REQUIRES OHM SPECIFICATIONS W-A-R-N-I-N-G! DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT

ROMEO 20M00146 1420-01-686-9216 016869216 13688208 GYRO OPTICS ASSEMBL 3 3 3 3 3 3 3 3 3 04939 336419 1000 4D 4/18/27 YES NO 360 N/A W-A-R-N-I-N-G! THIS ITEM REQUIRES OHM SPECIFICATIONS W-A-R-N-I-N-G! DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT

AMRC descriptions

AMRC Descriptions:

3D: Acquire, for the second or subsequent time, directly from the actual manufacturer. The data needed to acquire this part competitively is not physically available, it cannot be obtained economically, nor is it possible to draft adequate specifications or any other adequate, economical description of the material for a competitive solicitation.

3N: Acquire, for the second or subsequent time, directly from the actual manufacturer. Manufacture of this part requires special test and/or inspection facilities to determine and maintain ultra-precision quality for its function or system integrity. Substantiation and inspection of the precision or quality cannot be accomplished without such specialized test or inspection facilities.

3Q: Acquire, for the second or subsequent time, directly from the actual manufacturer. The Government does not have adequate data, lacks rights to data, or both needed to purchase this part from additional sources. The Government has been unable to economically buy the data or rights to the data, although the part has been undergoing full screening for 12 or more months. Breakout to competition has not been achieved, but current, continuing actions to obtain necessary rights to data or adequate, reprocurement technical data indicate breakout to competition is expected to be achieved. This part may be a candidate for reverse engineering or other techniques to obtain technical data.

3P: Acquire, for the second or subsequent time, directly from the actual manufacturer. The rights to use the data needed to purchase this part from additional source(s) are not owned by the Government and cannot be purchased, developed, or otherwise obtained. It is uneconomical to reverse engineer this part. This code is used in situations where the Government has the data but does not own the rights to the data.

4P: Acquire, for the first time, directly from the actual manufacturer. The rights to use the data needed to purchase this part from additional source(s) are not owned by the Government and cannot be purchased, developed, or otherwise obtained. It is uneconomical to reverse engineer this part. This code is used in situations where the Government has the data but does not own the rights to the data.

Packaging - Mil or Comm

MILITARY (DS7029 - DS7033) OR COMMERCIAL Supplemental Info

YR1 YR2 YR3 YR4 YR5 YR6 YR7 YR8 YR9 NSN I. II. III. IV. V. VI. VII. VII. IX X VIIIA.

CLINs Weight Length Width Depth (MP) (CD) (PM) (WM) (CD) (CT) (UC) (IC) (PK) (SM) (OPI)

1 1001 2001 3001 4001 5001 6001 7001 8001 9001 5998-01-577-1892 N/A YES YES Military B 001 000 1.8 10.5 6.0 4.0 GX 1 00 K3 LT A ED 00 F 39 M N/A

2 1002 2002 3002 4002 5002 6002 7002 8002 9002 5998-01-576-9946 N/A YES YES Military B 001 000 1.9 10.5 10.5 4.0 GX 1 00 K3 LT A NS 00 Q 39 M NS- FASTPACK CONTAINER (XC9)

3 1003 2003 3003 4003 5003 6003 7003 8003 9003 1336-01-596-4913 ALX5964913 / N/A YES YES Military A 001 000 120.5 38.3 22.0 12.8 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A

4 1004 2004 3004 4004 5004 6004 7004 8004 9004 5998-01-588-1593 N/A YES YES Military B 001 000 1.0 10.5 10.5 4.0 GX 1 0 K3 LT A NS 00 Q 39 M NS - FASTPACK CONTAINER (XC9), NSN 8115-01-057-1244

5 1005 2005 3005 4005 5005 6005 7005 8005 9005 1337-01-507-7460 AL00000909/ 13587584 YES YES Military A 001 000 36.0 28.0 10.0 10.0 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A

6 1006 2006 3006 4006 5006 6006 7006 8006 9006 1336-01-595-4646 TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD

7 1007 2007 3007 4007 5007 6007 7007 8007 9007 1420-01-611-9105 ALX6119105 YES YES Military B 001 000 48.0 31.0 17.0 14.5 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A

8 1008 2008 3008 4008 5008 6008 7008 8008 9008 1440-01-484-9151 AL14849151 YES YES Military A 001 000 89.0 44.5 15.5 11.8 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A WPM MUST BE ISPM-15 COMPLIANT;MARK CONTAINERS WITH 01&19 SM' s

9 1009 2009 3009 4009 5009 6009 7009 8009 9009 5998-01-495-1141 N/A YES YES Military B 001 000 3.0 18.5 12.5 3.0 GX 1 00 K3 LT A NS 00 Q 39 M NS - FASTPACK "XC7" (8115-01-019-4085)

10 1010 2010 3010 4010 5010 6010 7010 8010 9010 5995-01-495-6043 N/A YES YES Military B 001 000 1.5 10.0 10.0 5.0 41 1 00 EA NA A ED 00 Q 00 M N/A

11 1011 2011 3011 4011 5011 6011 7011 8011 9011 1420-01-678-4173 TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD

12 1012 2012 3012 4012 5012 6012 7012 8012 9012 5998-01-669-9884 TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD

13 1013 2013 3013 4013 5013 6013 7013 8013 9013 1420-01-593-8201 ALX5938201 / 13556381 YES YES Military A 001 000 15.0 16.5 14.5 14.5 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A

14 1014 2014 3014 4014 5014 6014 7014 8014 9014 1420-01-673-9461 TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD

15 1015 2015 3015 4015 5015 6015 7015 8015 9015 5998-01-495-1145 N/A YES YES Military B 001 000 13.4 34.5 12.5 7.5 41 1 00 EA NA D ED 00 F 00 M N/A

16 1016 2016 3016 4016 5016 6016 7016 8016 9016 1410-01-686-9184 N/A YES YES Military B 001 000 6.9 12.5 12.5 12.5 GX 1 00 K3 LT D ED 00 F 39 M N/A

17 1017 2017 3017 4017 5017 6017 7017 8017 9017 1420-01-686-9216 TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD