King Nutronics MN 3666 SOW Draft3.doc

Draft Statement of Work King Nutronics model 3666-10K-3

1. INTRODUCTION

The Naval Air Systems Command (NAVAIR) Metrology and Calibration Program (METCAL) has a duty to provide calibration standards to the depot level and intermediate calibration laboratories to verify the operations of naval aviation support equipment across the fleet. The King Nutronics Automated Pressure Calibration (APC) model number (M/N) 3666-10K-3 has been found to be capable of providing inter-service pressure calibration workload.

2. BACKGROUND

The King APC M/N 3666 in the NAVAIR METCAL inventory enables users to calibrate almost any type of pressure gauge, transducer, transmitter, or switch including the following: vacuum, compound, absolute and high-pressure devices. The Calibrator consists of a Pressure Controller, a Pressure Intensifier, a Nitrogen Cylinder, a Thermal Printer and an Accessory Kit. The replenishment of the M/N 3666-10K-3 will result in greater reliability, maintainability and overall turnaround time for a calibration which would improve fleet readiness. All orders and interfacing will be done through King Nutronics.

3. SCOPE

The scope of this effort is to procure fifty (50) King M/N 3666-10K-3 APCs with the option to procure two (2) additional quantities of fifty (50) units each.

4. APPLICABLE DOCUMENTS

N/A

5. REQUIREMENTS

5.1 Hardware Requirements

5.1.1 The Contractor shall furnish 50 King M/N 3666-10K-3 APCs. Additionally, if ordered, the Contractor shall provide two (2) option quantities of fifty (50) units each in accordance with the ordering periods in table 1 below.

Table 1 King M/N 3666-10K-3 APC delivery Quantities

King APC, C-Model, Strain Gauge, M/N 3666-10K-3

King APC, C-Model, Strain Gauge, M/N 3666-10K-3 Option 1

King APC, C-Model, Strain Gauge, M/N 3666-10K-3 Option 2

5.2 Logistics Requirements

5.2.1 Calibration Certification with Report and/or Certificate of Conformance Report (CDRL A001). A calibration certification and/or Certificate of conformance with calibration data shall be provided in accordance with CDRL

A001.

5.2.2 Instrument Calibration Procedure (ICP) (CDRL A002). The Original Equipment Manufacturer’s (OEM) ICP shall be provided for calibrating the M/N 3666-10K-3 in accordance with CDRL A002.

5.2.3 Release and/or Version Number of Each Item of Firmware and Software (CDRL A003). The firmware and software used to operate each and every calibration standard procured on any individual delivery order under this contract shall be of the same release and version. No deviation or substitution of firmware and/or software shall be done without the approval of the US Government. The contractor shall provide the US Government the release and/or version number of each item of firmware and software included in the calibration standard in accordance with CDRL A003, Software/Firmware Version Description.

5.2.4 Software/Firmware Change Request (CDRL A004). When an item of firmware or software needs to be changed a Software/Firmware Change Request shall be submitted to the US Government in accordance with CDRL A004.

5.2.5 Repairable Parts list (CDRL A005). A repairable parts list shall be provided to the Government for each standard installed in accordance with CDRL A005.

5.2.6 Operator/Service Manual(s) (CDRL T001). Technical manuals describing how to operate the M/N 3666-10K-3 shall have information on operator safety, operating procedures for the system and preventative maintenance. Service manuals shall contain information on safety for servicers of the M/N 3666-10K-3 and instructions on repairing and maintaining components the OEM designates as user serviceable. Technical manual(s) for the operation and/or service of the M/N 3666-10K-3 Automatic Pressure Calibrator shall be provided in accordance with CDRL T001.

5.2.7 Technical Manuals (CDRL T001). Operator and Service manual(s) shall be provided in accordance with CDRL T001. The service manual shall include an illustrated parts breakdown. The operator’s manual or section in a combined manual shall provide preventive maintenance and safety information.

5.2.8 Warranty. The manufacturer shall provide the minimum commercial warranty for the calibration standard of at least one (1) calendar year from date of shipment.

5.2.9 Warranty Sticker. Each calibration standard shall have a sticker affixed to the outside of the unit enclosure.

6. GOVERNMENT FURNISHED PROPERTY

N/A

6.1 Government Furnished Material

N/A

6.2 Government Furnished Equipment

N/A

6.3 Government Furnished Information

N/A