JUSTIFICATION FOR SOLE SOURCE_Redacted.pdf

JUSTIFICATION FOR SOLE SOURCE ($5k-$250k) Ref: FAR 13.106(b)

The service or material listed on (Document number)__23003950________ is sole source and competition must be restricted to one source, or to only one brand name for reasons indicated below. There are no substitutes available for this material.

Restricted to the following source or brand name. Provide original manufacturer's name.

(If a sole source manufacturer distributes via dealers, ALSO provide dealer information.)

Manufacturer: Ampco Pumps Company Manufacturer POC & Phone Nr. 800-737-8671 Mfr. Address: 2045 W. Mill Road Glendale, WI 53209 Manufacturers Dealer/Rep: Pump Industries, Inc. / John Osterhout Dealer/Rep Address/Phone Number: 9320 15th. Ave. S C-A, Seattle, WA 98108/206-767-0733

_X__Description of the item or service required, the estimated cost, and required delivery date.

_______PUMP, CENTRIFUGAL, MFR: AMPCO, MODEL: ZC2, SIZE: 3"X2.5" FLANGED CONNECTION, PUMP END MATERIAL: STAINLESS STEEL 316, SEALS-T21-CE/CA/BU, 1OHP, 3PH, 215JM, 230/460V, TEFC MOTOR IMPELLER TRIM: 5.25", Need by Date 12/2/22, Estimated cost _____

__X_Specific characteristics of the material or service that limit the availability to a sole source or particular brand name (unique features, function of the item, etc.).

Describe in detail why only this suggested source can furnish the requirements to the exclusion of other sources.

____The units are direct replacements of the same pumps, Model: ZC2, same as existing S/N:

T-54668-1-1. SIZE: 3"X2.5" FLANGED CONNECTION, PUMP END MATERIAL: STAINLESS STEEL Pump end 316, SEALS-T21-CE/CA/BU, 1OHP, 3PH, Frame: 215JM, 230/460V, TEFC MOTOR IMPELLER TRIM:

5.25", Discharge Flange: 2.5" 150# flat faced flange, Suction: 3" 150" Flat Faced Flange, overall length CP-25-9/16, Overall height: OP-12", Frame Bolt measurements: F-7" x E-4- 1/4", Measurement L: 13-1/4", Measurement D: 5-1/4", Measurement A: 9-5/8", Measurement B:

8-1/8"

__X_The requested material or service represents the minimum requirements of the Government.

CHECK & FILL IN ALL APPLICABLE BLANKS BELOW

__X_The material/service must be compatible in all aspects (form, fit and function) with existing systems presently installed. Justi Describe the equipment you have now and how the new item/service must coordinate, connect, or interface with the existing system.

_____We currently use these models and we will take the old ones out and replace them with the new ones with the same measurements. They go into a connex box outfitted on piping skids that are already ran and ready to set up to the ships system when needed.

___A patent, copyright, or proprietary data limits competition. The proprietary data is:

______NO Patent

__X_These are “direct replacements” parts/components for existing brand name equipment.

__X__Other information to support a sole-source buy:

_____Units have the same dimensions and productions________________________________

I CERTIFY THAT STATEMENTS CHECKED, AND INFORMATION PROVIDED ABOVE, ARE COMPLETE AND CORRECT TO THE BEST OF MY KNOWLEDGE AND DO NOT CONTAIN CLASSIFIED INFORMATION. I UNDERSTAND THAT THE PROCESSING OF THIS SOLE-SOURCE JUSTIFICATION PRECLUDES THE USE OF FULL AND OPEN

COMPETITION.

Contracting Officer Signature Date _________________

DLA Maritime Puget Sound Justification for Sole Source