JUSTIFICATION FOR SOLE SOURCE 41029003_Redacted.pdf
PDF 911 KB Posted
- Attached to
- SHORT SLIDE 3D Federal contract opportunity
- Solicitation number
- SPMYM224Q1680
About this file
This document is a Justification for Sole Source ($5k-$250k) for various tubing bending tools and accessories required by the Defense Logistics Agency Land and Maritime. The manufacturer is Pedrick Tool & Machine Co., Inc. and the dealer is Texnet Inc. The total estimated cost for the items is not provided, but the individual part numbers and descriptions are listed, including short slides, spindle extensions, and carbon steel dies and aluminum shoes to bend tubing in various diameters and radii. The required delivery date is not specified. The sole source justification cites the lack of available substitutes for the specialized tooling.
The related federal contract opportunity is a solicitation (SPMYM224Q1680) for a "SHORT SLIDE 3D" requirement, issued by the Defense Logistics Agency Land and Maritime. The solicitation is posted on the SAM.gov website, and electronic submission of quotes is available. Contractors are required to comply with NIST SP 800-171 cybersecurity requirements, unless the items are deemed Commercial Off-The-Shelf (COTS).
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPMYM224Q1680.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
JUSTIFICATION FOR SOLE SOURCE ($5k-$250k) Ref: FAR 13.106(b)
The service or material listed on JML Document # 41029003 thru 41029021 are sole source and competition must be restricted to one source, or to only one brand name for reasons indicated below.
There are no substitutes available for this material.
Restricted to the following source or brand name. Provide original manufacturer's name.
(If a sole source manufacturer distributes via dealers, ALSO provide dealer information.)
Manufacturer: Pedrick Tool & Machine Co., Inc. CAGE: 46137 (Inactive) Manufacturer POC & Phone Nr.: Ralph M Scott, 856-829-8900 Mfr. Address: PO Box 190 Riverton, NJ 08077 Manufacturers Dealer/Rep: Texnet Inc. CAGE: 3DW31 (Pending) Dealer/Rep Address/Phone Number: 763 b Railroad Avenue Florence, NJ 08518 CONTACT: Annette Scarperia Tel: 609-499-9111
_X__ Description of the item or service required, the estimated cost, and required delivery Date.
AS STATED BELOW AND ENCLOSED IN QUOTE. ESTIMATED COST
Description Qty Total Price
JML # 41029003 Short Slide (3D) 1 EA JML # 41029004 1 ¼ INCH Spindle Extension 1 EA JML # 41029005 Carbon steel post die and aluminum shoe to bend ¼ INCH OD tubing to a ¾ INCH (3D) centerline radius, 0-90°, with a holdback clip assembly
1 EA
JML # 41029006 Carbon steel die and aluminum show to bend INCH OD tubing to a 1 INCH (3D) centerline radius, 0-90°, with a holdback clip assembly
1 EA
JML # 41029007 Carbon steel die and aluminum shoe to bend 2 INCH OD tubing to a 1 2 INCH (3D) centerline radius, 0-90°, with a holdback clip assembly
1 EA
JML # 41029008 Carbon steel die and aluminum shoe to bend ¾ INCH OD tubing to a 2 ¼ INCH (3D) centerline radius, 0-90°, with a hold back clip assembly
1 EA
JML # 41029009 Carbon steel die and aluminum shoe to bend 1 INCH OD to a 3 INCH (3D) centerline radius, 0-90°, with holdback back clip assembly
1 EA
JML # 41029010 Carbon steel die and aluminum shoe to bend 1 ¼ INCH OD tubing to a 2 ¾ INCH (3D) centerline radius, 0-90°, with a holdback clip assembly
1 EA
JML # 41029011 Carbon steel die and aluminum shoe to bend 1 2 INCH OD tubing to a 4 2 INCH (3D) centerline radius, 0-90°, with a holdback clip assembly
1 EA
JML # 41029012 Carbon steel die and aluminum shoe to bend 2 INCH OD tubing to a 10 INCH (3D) centerline radius, 0-90°, with a holdback clip assembly
1 EA
JML # 41029013 Short slide (5D) 1 EA JML # 41029014 Carbon steel die and aluminum shoe to bend ¼ INCH OD tubing to a 1 ¼ INCH (5D) centerline radius, 0-90°, with a holdback slip assembly
1 EA 0
JML # 41029015 Carbon steel die and aluminum shoe to bend 3/8 INCH OD tubing to a 1 7/8 INCH (5D) centerline radius, 0-90°, with a holdback slip assembly
1 EA
JML # 41029016 Carbon steel die and aluminum shoe to bend 2 INCH OD tubing to a 2 2 INCH (5D) centerline radius, 0-90°, with a holdback clip assembly
SET
1 EA
File details come from the government source that posted it. Updated .