JOTFOC_70Z08521P40089B00.pdf
PDF 48 KB Posted
- Attached to
- Resistor, Variable Federal contract opportunity
- Solicitation number
- 70Z08521Q40089B00
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| FBO SHIPPING REQUIREMENTS.docx | DOCX document | |
| FBO PAYMENT TERMS.docx | DOCX document | |
| 70Z08521Q40089B00 - RFQ.docx | DOCX document | |
| FAR Clauses - 70Z08521P40089B00.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PROJECT/TASK
NUMBER
CODE
ONE LEVEL ABOUT CONTRACTING OFFICER TELEPHONE NUMBER DATE
SIMPLIFIED ACQUISITION PROCEDURES (SAP)
JUSTIFICATION FOR OTHER THAN FULL AND OPEN COMPETITION (J&A)
SOLICITATIONS MAY BE LIMITED TO ONE SOURCE ONLY IF THE CONTRACTING OFFICER DETERMINES THAT ONLY ONE SOURCE IS REASONABLY AVAILABILE. THIS DETERMINATION MUST BE SUPPORTED WITH FULL JUSTIFICATION FOR SOLE SOURCE FROM CUSTOMER. WHEN THE CUSTOMER DESCRIBES AN ITEM WITH A PURCHASE DESCRIPTION WHICH LIMITS THE AVAILABILITY TO ONE SOURCE, THE JUSTIFICATION MUST EXPLAIN WHY THE ITEM IS THE ONLY ONE THAT WILL MEET THE GOVERNMENT’S REQUIREMENT. STATEMENTS SUCH AS “ONLY KNOWN SOURCE” OR “ONLY SOURCE WHICH CAN MEET THE REQUIRED DELIVERY DATE” ARE INADEQUATE TO SUPPORT A SOLE SOURCE PURCHASE. THE CUSTOMER SHALL PROVIDE THE FOLLOWING INFORMATION:
PURCHASE REQUEST OR REQUISTION NUMBER ESTIMATED AMOUNT (OVER $3,000 BUT NOT EXCEEDING $150,000)
BRIEF DESCRIPTION OF SUPPLIES OR SERVICES REQUIRED, AND THE INTENDED USE
UNIQUE CHARACTERISTICS THAT LIMIT AVAILABILITY TO ONLY ONE SOURCE, WITH THE REASON NO OTHER SUPPLIES OR SERVICES CAN BE USED.
REASON THAT SUGGESTED SOURCE IS THE ONLY SOURCE WHICH CAN PROVIDE THE SUPPLIES OR SERVICES
EXPLAIN WHY AN ADEQUATE PURCHASE DESCRIPTION OR OTHER INFORMATION SUITABLE TO SOLICIT BY FULL AND OPEN COMPETITION HAS NOT BEEN
DEVELOPED OR ARE NOT AVAILABLE
PROVIDE A STATEMENT OF ACTIONS, IF ANY, THE GOVERNMENT MAY TAKE TO REMOVE OR OVERCOME ANY BARRIERS TO COMPETITION BEFORE FUTURE
ACQUISITIONS ARE REQUIRED
SIGNATURE AND TITLE OF CUSTOMER
TELEPHONE NUMBER
DATE
SIGNATURE OF CONTRACTING OFFICER TELEPHONE NUMBER DATE
| SOLICITATIONS MAY BE LIMITED TO ONE SOURCE ONLY IF THE CONTRACTING OFFICER DETERMINES THAT ONLY ONE SOURCE IS REASONABLY AVAILABILE THIS DETERMINATION MUST BE SUPPORTED WITH FULL JUSTIFICATION FOR SOLE SOURCE FROM CUSTOMER WHEN THE CUSTOMER DESCRIBES AN ITEM WITH A PURCHASE DESCRIPTION WHICH LIMITS THE AVAILABILITY TO ONE SOURCE THE JUSTIFICATION MUST EXPLAIN WHY THE ITEM IS THE ONLY ONE THAT WILL MEET THE GOVERNMENTS REQUIREMENT STATEMENTS SUCH AS ONLY KNOWN SOURCE OR ONLY SOURCE WHICH CAN MEET THE REQUIRED DELIVERY DATE ARE INADEQUATE TO SUPPORT A SOLE SOURCE PURCHASE THE CUSTOMER SHALL PROVIDE THE FOLLOWING INFORMATION: |
| PURCHASE REQUEST OR REQUISTION NUMBER: |
| PROJECTTASK NUMBER: |
| ESTIMATED AMOUNT OVER 3000 BUT NOT EXCEEDING 150000: |
| BRIEF DESCRIPTION OF SUPPLIES OR SERVICES REQUIRED AND THE INTENDED USE: Purchase of: Three (03) Vaneaxial Fans, NSN 5905-01-449-2399, P/N: 4400A1220-1 |
OEM: L3 Henschel CAGE: 23905
Used on WLB-225 UNIQUE CHARACTERISTICS THAT LIMIT AVAILABILITY TO ONLY ONE SOURCE WITH THE REASON NO OTHER SUPPLIES OR SERVICES CAN BE USED: Th~s procurement is to purchase a potentiometer assembly used m the Ship's Control System (SCS) Bow and Stern Thruster Control Panels installed aboard the WLB buoy tender The SCS controls all of the functions of the bow and stem thrusters. The thrusters are used for precision maneuvering of the ship at low speeds and wide working on aids to navigation.
Th=s =s the initial procurement for th=s assembly. They wdl be used to alleviate on board repair part shortages and for system stock. Only OEM parts are guaranteed fit and operate properly with the parts being replaced.
| REASON THAT SUGGESTED SOURCE IS THE ONLY SOURCE WHICH CAN PROVIDE THE SUPPLIES OR SERVICES: The Coast Guard did not purchase the manufacturer's proprietary data rights, and therefore, cannot determine with certainty that an alternative part number would mount to, interface with, or operate effectively with Coast Guard Cutters. Failure of an alternative part, not conforming to the OEM's specifications, could cause damage to the cutters. |
| EXPLAIN WHY AN ADEQUATE PURCHASE DESCRIPTION OR OTHER INFORMATION SUITABLE TO SOLICIT BY FULL AND OPEN COMPETITION HAS NOT BEEN DEVELOPED OR ARE NOT AVAILABLE: L3 Henschelis the Original Equipment Manufacturer (OEM) for this part. When Coast Guard purchased the original equipment there were no requirements for manufacturer's drawings, detailed parts lists, design or testing procedures. OEM is the only know manufacturer that has the techniques, design specifications, testing, quality assurance capability, and documentation necessary to manufacture this part used on WLM-175 class Coast Guard Cutters. |
| PROVIDE A STATEMENT OF ACTIONS IF ANY THE GOVERNMENT MAY TAKE TO REMOVE OR OVERCOME ANY BARRIERS TO COMPETITION BEFORE FUTURE ACQUISITIONS ARE REQUIRED: COR will continue to conduct market research with a focus on locating vendors that are able to meet requirements, however without technical data described above obtaining full and open competition will be difficult. The Coast Guard cannot require any vendor to release proprietary information. |
| SIGNATURE AND TITLE OF CUSTOMER: |
| CODE: |
| TELEPHONE NUMBER: |
| DATE: |
| SIGNATURE OF CONTRACTING OFFICER: |
| CODE_2: |
| TELEPHONE NUMBER_2: |
| DATE_2: |
| ONE LEVEL ABOUT CONTRACTING OFFICER: |
| CODE_3: |
| TELEPHONE NUMBER_3: |
| DATE_3: |
File details come from the government source that posted it. Updated .