AG_Tractor_Meets_or_Exceeds_sheet.xlsx
XLSX spreadsheet 14 KB Posted
- Attached to
- 4WD AG Tractor package Federal contract opportunity
- Solicitation number
- JBLM-YTC-DPW-SK18-019
- Issued by
- Department of the Army
View the file
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Sheet1
| 4WD AG TRACTOR | |
| EQUIPMENT SPECIFICATIONS | MEETS OR EXCEEDS |
(Yes or No)
| ENGINE | Horsepower: 167 or more. PTO horsepower: 139 or more. Direct Injection, with Intercooler turbocharger, water-cooled 4 cycle diesel 4 cylinder engine. |
| TRANSMISSION | Continuously variable transmission that offers an infinite number of forward and reverse speeds while maintaining consistent engine rpm. To have electronic adjustable throttle at finger tips as well foot throttle. Push button cruise control. |
| OPERATING WEIGHT | 15,000 lbs to 17,000 lbs without additional weights. Require two 500 lb rear wheel weights each side for a total of 2,000 lbs of rear wheel weight. This is an add on for traction and ballast much like an accessory. Wheel weights, snow blower and mower not to be added in to operating weight for specification requirements. |
| SPEED | 30 MPH or greater |
| ALTERNATOR | 200 amp |
| FUEL TANK CAPACITY | 85 Gallons or more |
| DEF TANK CAPCITY | 10 Gallons or more |
| CAB | Fully enclosed cab, with 4 pillar ROPS for maximum visibility. Heat, defrost and Air conditioning. Front and rear windshield wipers. Air suspension seat with controls and monitor console attached to seat to move up and down with seat. To include a second seat for instructor. Cab doors to lock/unlock by key on outside. Cab on suspension system. Front sun visor, rear retractable sunshade. Radio with Bluetooth connectivity for phone. Tinted glass, doors and steps both sides. 12V outlet, dome light, horn. |
| MONITOR | 12 inch LCD touch screen monitor that shows tractor controls and data, ISO-BUS connected equipment capable |
| WHEELBASE | 105 inches to 110 inches |
| FRONT AXLE | Front axle to have suspension that can be adjusted manually or automatically for stiffness. Drive type with power steering. Auto 4wd function. Electro hydraulic differential lock, with auto diff lock function. |
| REAR AXLE | Flange mount or bar. Bar to be no longer than 110 inches. Electro hydraulic differential lock, with auto diff lock function. |
| PTO | Independent 540/540E/1000/1000E with elector Hydraulic engagement. Auto PTO on/off with 3 point hitch position. 4 speeds with 6 and 21 splines. To have switch on fender to rotate PTO shaft for attaching implements easier. |
| HYDRAULICS | Closed Center, Load Sensing. Total system flow of 40 GPM or more. |
| REAR REMOTES | Minimum of 5 rear variable flow, load sensing remotes with electronic auxiliary control. Switch to activate and can also be activate on monitor. Can also adjust flow with in monitor. |
| FRONT REMOTES | 2 auxiliary remote connections at front of tractor. |
| FRONT 3 POINT HITCH | Front 3 point hitch with 1000 RPM PTO. Shaft and splines to match snow blower. Max lift capacity 7,700 lbs or more. The 2 remotes required in the front are in addition to the raise and lowering circuit of the front hitch. |
| REAR 3 POINT HITCH | Category 3 with telescopic lower links and installed quick hitch. Max lift capacity at lift points 20,700 lbs or more. 24 inches behind 11,700 lbs or more. Electronic position and draft control. Monitor should display position. To have a switch on fender at rear to raise or lower 3 point from the ground for attaching implements. |
| LIGHTING | hazard lights, turn signals front and rear, tail lights. Minimum of 4 rear and 8 front work lights, 2 headlights. |
| TIRES | Front, 540/65R28 Rear 650/65R38 high traction ag/chevron bar type. |
| MIRRORS | Telescopic heated mirrors |
| DRAWBAR | Category 2 drawbar |
| SERVICE/SUPPORT | We need dealer support within 25 miles from the installation. There is a limited amount of manufacturers that have dealer support in the Yakima area. We are often having to run to the dealer for parts and consumable items. Occasionally we have to haul our equipment to the dealer or they come to installation for a service call. We do not have the time or man power to be traveling great distances to get this support. For the reasons mentioned above we ask that consideration be limited to manufacturers that have a dealer with a service and parts department within 25 miles of the Yakima Training Center. |
| MANUALS | To include 2 Operator manuals, request factory parts book, and factory service manual |
| HEAVY DUTY 10 FT DUAL SPINDLE ROTARY MOWER | |
| TYPE | 3 point hitch lift type, category 3, dual spindle, centered mount no offset, quick hitch adaptable. |
| CUTTING WIDTH | 10 feet |
| CONSTRUCTION | 10 Gauge fully welded deck with 1/4 inch thick sidewalls. |
| CUTTING CAPACITY | 3 inch cutting capacity or greater |
| CUTTING HEIGHT | adjustable 2 inches to 12 inches |
| SHOES | Bolt on replaceable shoes |
| BLADE MOUNTS | 2 each, 1 inch x 4 inch bar or greater with 3/16 inch or thicker round pan/stump jumper |
| BLADES | 4 Blades, 1/2 inch X 4 inch or greater heat treated, free swinging suction blades. |
| TIRES | 6" x 9" x 21" caster laminated or larger, mounted on axle that is hydraulically adjustable. |
| DRIVELINE | ASAE Cat 4 with slip clutch protection |
| GEARBOX | Main gearbox rated for 210 HP or more. Spindle gearboxes rated for 200 HP or more |
| GUARDING | chain curtain guards front and back |
| WEIGHT | 2,100 lbs to 2,400 lbs |
| COMPATIBILITY | To be installed on tractor above, rated for and compatible for use on it. |
| SERVICE/SUPPORT | We need dealer support within 25 miles from the installation. There is a limited amount of manufacturers that have dealer support in the Yakima area. We are often having to run to the dealer for parts and consumable items. Occasionally we have to haul our equipment to the dealer or they come to installation for a service call. We do not have the time or man power to be traveling great distances to get this support. For the reasons mentioned above we ask that consideration be limited to manufacturers that have a dealer with a service and parts department within 25 miles of the Yakima Training Center. |
| MANUALS | To include 2 Operator manuals, request factory parts book, and factory service manual |
| 9 FOOT FRONT MOUNT SNOW BLOWER | |
| WEIGHT | 1900 to 2200 lbs |
| WORKING WIDTH | 108 inches |
| MAIN HOUSING MATERIAL | 3/16 inch thick |
| IMPELLER | 32 to 36 inches |
| CHUTE OPENING AT BASE | 15 to 18 inches |
| CHUTE ROTATION | Hydraulic, operated from inside cab. |
| CHUTE DEFLECTOR OPERATATION | Hydraulic, operated from inside cab. |
| SKID SHOES | Outer-Side-Mount, Inner-Rear Mount |
Adjustable & Replaceable
| COMPATIBILITY | To be installed on tractor above, rated for and compatible for use on it. |
| SERVICE/SUPPORT | We need dealer support within 25 miles from the installation. There is a limited amount of manufacturers that have dealer support in the Yakima area. We are often having to run to the dealer for parts and consumable items. Occasionally we have to haul our equipment to the dealer or they come to installation for a service call. We do not have the time or man power to be traveling great distances to get this support. For the reasons mentioned above we ask that consideration be limited to manufacturers that have a dealer with a service and parts department within 25 miles of the Yakima Training Center. |
| MANUALS | To include 2 Operator manuals, request factory parts book, and factory service manual |
Sheet2
Sheet3
File details come from the government source that posted it.