Dozer_meets_or_exceeds_sheet.xlsx
XLSX spreadsheet 14 KB Posted
- Attached to
- Dozer with PAT blade Federal contract opportunity
- Solicitation number
- JBLM-YTC-DPW-SK18-006
- Issued by
- Department of the Army
View the file
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Sheet1
| SAILENT CHARACTERISTICS FOR NEW DOZER | ||
| FEATURE | SPECIFICATION | MEETS OR EXCEEDS |
(Yes or No)
| DRAWBAR PULL | A maximum drawbar pull of 57,000 lbs. or greater |
| ENGINE | Horsepower 165 hp or greater. |
Torque 567 lbs. ft. or greater.
Turbocharged with charge air cooler.
Fan hydraulic driven, both auto and manual reversing. variable speed to only run enough to keep engine cool.
Dual element air filter with pre filter TRANSMISSION Automatic, dual-path, hydrostatic.
MUST HAVE 18 or more individual gear selections Capable of full power turns and counter rotation.
Independently selectable reverse speed ratios.
Single-lever steering with speed, direction control, and counter-rotation.
Must be able to switch between engine decel or transmission decel modes by switch in operator station. Both modes shall allow for dozer to come to a complete stop by fully depressing decel pedal.
BRAKES Service: HST (dynamic) braking stops the machine whenever the direction-control lever is moved to neutral or the decelerator is depressed to the detent.
Parking: spring-applied, hydraulically released park brake safety feature engages wet, multiple-disc brakes automatically whenever the engine stops, the operator depresses the decelerator pedal to the brake position, the unit is in neutral for 3 seconds (with detected motion), or the park-lock lever is in the park position; machine cannot be driven with brake applied,
| CAB | Enclosed with Left and Right quarter hinged windows, Tinted safety glass, Dome light, Heater, roof-mounted 24,000 BTU(or greater) air conditioner, Floor mat (4) Windshield wiper/washers for windshield, rear window and doors, AM/FM weather-band radio with Bluetooth (this aids us with communications on fires).-area storage slot with second 12V power port. Heated Air suspension seat. |
| CAB dBA RATING | 75 dBA or less |
| CAB MOUNTS | Oil-filled cab mounts and extensive |
insulation. Cab must tilt 70 deg. Or greater to allow access to internal components
| LIGHTS | Minimum of 2 in grill, 2 on side of cab, 2 rear facing and 1 in engine compartment. LED |
| BATTERIES | Dual Maintenance Free Batteries With Disconnect. |
| CONTROLS | 4 Function Hydraulic Controls for Power-Angle-Tilt (PAT) Include rear Auxiliary plumbing for ripper. |
| UNDERCARRIAGE | Extra Long Track, 45 Link with Extended Life Bushings and 24 inch Extreme Service Shoes. |
| TRACK GAGE | Between 74 inches and 78 inches |
| TRACK ROLLERS | 8 or more each side |
| TRACK LENGTH ON GROUND | 121 inches or more |
| ROCK GUARDS | Must have full length rock guards to protect rollers |
| GROUSERS | Single bar grousers with a tread depth of 2.5 inches or greater. |
| FUEL TANK CAPACITY | 95 US gallons or greater. |
| GRILL | Heavy Duty. Grill and fan assembly can be tipped out to blow out debris by the operator while on a fire. |
| HITCH/DRAWBAR | Hitch/drawbar installed with pin |
| BLADE | 6 way PAT (power angle tilt) |
Width between 128 and 132 inches.
Blade to have additional spill guard/sheet on top of blade to increase protection of spill over on to hydraulic cylinders.
Push button blade "shake" feature to vibrate dirt off of blade.
| BLADE MOUNT | C Frame mount with Horizontal lift cylinders and a heavy duty greasable ball and socket mount from C frame to blade |
| BLADE LIFT HEIGHT | 38 inches above ground or higher. |
| OPERATING WEIGHT | Between 38,000 and 42,000 lbs. (as measured by industry standard with all equipment, full of fuel and operator.) |
| TRAVEL SPEED | Must have maximum travel speed of 6.5 MPH or greater. This speed can be critical on fires. |
| FINAL DRIVES | Double-reduction, planetary final drives mounted independently of track frames for isolation from shock loads |
| SERVICE/SUPPORT | We need dealer support within 25 miles from the installation. There is a limited amount of manufacturers that have dealer support in the Yakima area. We are often having to run to the dealer for parts and consumable items. Occasionally we have to haul our equipment to the dealer or they come to installation for a service call. We do not have the time or man power to be traveling great distances to get this support. For the reasons mentioned above we ask that consideration be limited to manufacturers that have a dealer with a service and parts department within 25 miles of the Yakima Training Center. |
| MANUALS | To include 2 Operator manuals |
Sheet2
Sheet3
File details come from the government source that posted it.