Item Description - Tate Access Raised Florring.pdf
PDF 114 KB Posted
- Attached to
- Tate Access Raised Flooring Federal contract opportunity
- Solicitation number
- FA8126-23-R-0002
About this file
This document provides an item description for a federal contract solicitation seeking Tate Access Raised Flooring. The solicitation requires approximately eight thousand square feet of raised flooring with twenty-four by twenty-four inch panels at an eighteen-inch finished height. Specific quantities and specifications are outlined for the panels, understructure, stringers, screws, pedestals, airflow panels, and grommets. The related federal contract opportunity is identified as solicitation number FA8126-23-R-0002 issued by the Department of the Air Force Materiel Command Air Force Sustainment Center for Tate Access Raised Flooring in accordance with the item description provided. The opportunity is set aside exclusively for small businesses.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| CSS FA812623R0002.pdf | ||
| BNJ_Tate Access Raised Flooring_Redacted.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Item Description Tate Access Raised Flooring
To be Technically Acceptable, proposals shall propose to the following items and speceifications.
• Eight Thousand (8,000) Square Feet of Raised Flooring, with the following specifications:
a. Access Floor Panel Tate ConCore 1250-24” x 24”, 1/8” HPL Tile With Integral Trim Version, Formica Cheyenne Gray – 2002 each
b. Finish Raised Floor Height 18”
c. Panel Size: 24" x 24"
d. Rolling Load: 10 Passes @ 1,000 lbs
e. Impact Load: 150 lbs
f. Understructure: Bolted Grid (stringer)
• Field Pedestals including Nut, Stud, Tubing, Steel Head and Base Plate for CC1250 Panels (Type 2B Pedestal for 18” Finish Fraised Floor Height) – 2470 each
• Perimeter Pedestal including Nut, Stud Tubing Steel Head and Base Plate for CC1250 Panels ( Type 2B Pedestal for 18” Finish Raised Floor Height) - 450 each
Stringer and Screw:
i. Stringer: 1-1/4" x 3/4" Roll Formed - Galvanized - 4'x4' Pattern- 2160 each
ii. Stringer Screw: 1/4"-20 x 1-3/4" - Flat Head - Attach Stringer to Head -9 boxes / 1000 each – 9000 total Pedestal Head:
i. ¾”-10 UNC nut w/vibration proof locking & corrosion resistant coating
ii. 3/4"-10 UNC steel stud
iii. 11ga die formed galvanized steel head Pedestal Base:
i. 7/8” sq. 16ga wall galvanized tubing
ii. 4” x 4” x 8ga galvanized steel base
• Airflow Panels: 125ea - GrateAire (no dampers), 56% open area - White Powder Coat
• Forty (40) each-Grommet; Koldlok Air Sealing Grommet #K1010
• Forty (40) each Grommet; Koldlok Air Sealing Grommet #K3030
File details come from the government source that posted it. Updated .