Item Description for Back Support Exoskeletons.pdf
PDF 149 KB Posted
- Attached to
- Back Support Exoskeletons Federal contract opportunity
- Solicitation number
- FA8125-25-Q-0004
About this file
This document is a Memorandum for Record describing the requirement for back support exoskeletons. The Air Force Sustainment Center is requesting the purchase of 40 back support exoskeletons, 20 in sizes S/M and 20 in sizes L-XL. The exoskeletons must weigh less than 5 lbs., provide at least 40 lbs. of lift support, have a one-size-fits-all adjustable design, and be harness compatible. Key requirements include machine washable or ozone-cleanable materials, easily identifiable donning/doffing features for emergency egress, and no electrical components. No installation or training is required. The related federal contract opportunity, Solicitation Number FA8125-25-Q-0004, is for the procurement of these back support exoskeletons by the Department of the Air Force Materiel Command Air Force Sustainment Center.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Revised Item Description for Back Support Exoskeletons.pdf | ||
| Solicitation - FA812525Q0004.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DEPARTMENT OF THE AIR FORCE
HEADQUARTERS AIR FORCE SUSTAINMENT CENTER (AFMC)
TINKER AIR FORCE BASE OKLAHOMA
20 September 2024
MEMORANDUM FOR RECORD
SUBJECT: Item Description, A25-007 Exo Suits Backs Scale
1. The 76 AMXG/569th /566th Squadron is requesting utilization of funds for the purchase of back support exoskeletons.
2. Requesting forty (40) back support exoskeletons: twenty (20) of S/M and twenty (20) of
L-XL
o Less than 5 lbs. weight o At least 40 lbs. of lift support o One-size-fits-all style system o Operator-facing self-adjustment.
o No more than 2.5 inches of a silhouette increase during operation o Back must include adjustments for body height, hip width, torso height, leg length, and torso diameter.
o Must be harness compatible. (No need for special approvals, just need capability to wear both at once without impediment to motion or work.)
o Must be machine washable or cleaned via ozone, or a combination of the two.
o Must have easily identifiable donning/doffing features for emergency egress if required.
o Cannot be powered via electric energy of any kind (i.e. cannot use motors, servos, or contain any electrical circuit) o There should be No installation or training required by any outside party.
mailto:brett.stroud.1@us.af.mil
File details come from the government source that posted it. Updated .