Item Description.pdf
PDF 67 KB Posted
- Attached to
- Keyence Inspection System or Equivalent Federal contract opportunity
- Solicitation number
- FA812520Q0091
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Solicitation - FA812520Q0091.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DEPARTMENT OF THE AIR FORCE
OKLAHOMA CITY AIR LOGISTICS COMPLEX (OC-ALC)
TINKER AIR FORCE BASE OKLAHOMA
Statement of Requirement / Item Description
76 CMXG request the purchase of a Keyence Inspection System or Equivalent. :
One (1) Keyence Inspection System to include the following specifications:
One (1) - OP-88275 Accessory - Certified Calibration Standard To include:
One (1) - VR-A1E VR Software - Standard Software Package (English)
One (1) - VR Support Package
One (1) - VR-5000 Wide Area 3D Measurement System Measurement Controller
One (1) - VR-5200 Wide Area 3D Measurement System Measurement Head
One (1) - VR-H3CA VR Software - Comparison Module
One (1) - VR-H3J VR Software - Measurement Expansion Module
One (1) - VR-H3W VR Software - Profile Composition Module
Inspection System Salient Characteristics:
Hardware:
- Fully motorized X-Y and Z axes.
- Measurement area (minimum) 7.5” x 3.5” x 1.8”
- Operate using 120VAC, 60Hz electrical.
- Compatible at temperatures between 60F and 80F, with relative humidity between 40% and 75%.
- Multiple camera non-contact measurement system.
- White light source for measurement.
- Able to accept test articles weighing up to 9lbs.
- Field of view (at 25x) shall be no less than 0.30” in either direction.
- Field of view (at 120x) shall be no less than 0.075” in either direction.
- Measurement accuracy not to exceed 0.0002” at any level of magnification.
- Must not have any component that weighs greater than 75lbs.
- Must not require additional vibration isolation table.
- Must be provided with NIST-certified XY and Z calibration standard for user calibration.
Software Capabilities:
- Must support BMP, JPEG, & TIFF image file formats.
- Must have automatic part height and width detection
- Must be able to output data as a CSV, STL, ASCII, or STP file (3D CAD data).
- Must be able to perform the following functions o ISO 25178 Surface Roughness measurement o Average step height measurement o Comparative measurement o Volume/surface area measurement o Image stitching o Depth composition & 3D imaging o 2D measurement (distance, multi-pt. radius, diameter, angle, area, etc.)
File details come from the government source that posted it. Updated .