IFB ML-12170721 Mitchell Bridge Timber.pdf

STATE OF NORTH CAROLINA

Department of Transportation

Invitation for Bid: 54-ML-12170721

Treated Lumber

Date Issued: March 26, 2025

Bid Opening Date: April 7, 2025 At 2:00 PM ET

Direct all inquiries concerning this IFB to:

Michael Lingenfelter

Procurement Specialist II

Email: mwlingenfelter@ncdot.gov

Phone: 919-707-2642 mailto:mwlingenfelter@ncdot.gov

Ver. 11/2023

Invitation for Bids #

54-ML-12170721

For internal State agency processing, including tabulation of bids, provide your company’s eVP (Electronic Vendor Portal) Number. Pursuant to G.S. 132-1.10(b) this identification number shall not be released to the public. This page will be removed and shredded, or otherwise kept confidential, before the procurement file is made available for public inspection.

This page shall be filled out and returned with your bid.

Failure to do so shall be sufficient cause to reject your bid.

Vendor Name

Vendor eVP #

Note: For a contract to be awarded to you, your company (you) must be a North Carolina registered vendor in good standing. You must enter the vendor number assigned through eVP (Electronic Vendor

Portal). If you do not have a vendor number, register at https://vendor.ncgov.com/vendor/login

Electronic responses ONLY will be accepted for this solicitation.

https://vendor.ncgov.com/vendor/login

Ver: 11/2023 1

EXECUTION

In compliance with this Invitation for Bids (IFB), and subject to all the conditions herein, the undersigned Vendor offers and agrees to furnish and deliver any or all items upon which prices are bid, at the prices set opposite each item within the time specified herein.

By executing this bid, the undersigned Vendor understands that false certification is a Class I felony and certifies that:

this bid is submitted competitively and without collusion (G.S. 143-54), that none of its officers, directors, or owners of an unincorporated business entity has been convicted of any violations of Chapter 78A of the General Statutes, the Securities Act of 1933, or the Securities Exchange Act of 1934 (G.S. 143-59.2), and it is not an ineligible Vendor as set forth in G.S. 143-59.1.

Furthermore, by executing this bid, the undersigned certifies to the best of Vendor’s knowledge and belief, that:

it and its principals are not presently debarred, suspended, proposed for debarment, declared ineligible or voluntarily excluded from covered transactions by any Federal or State department or agency.

As required by G.S. 143-48.5, the undersigned Vendor certifies that it, and each of its sub-Contractors for any Contract awarded as a result of this IFB, complies with the requirements of Article 2 of Chapter 64 of the NC General Statutes, including the requirement for each employer with more than 25 employees in North Carolina to verify the work authorization of its employees through the federal E-Verify system.

As required by Executive Order 24 (2017), the undersigned vendor certifies will comply with all Federal and State requirements concerning fair employment and that it does not and will not discriminate, harass, or retaliate against any employee in connection with performance of any Contract arising from this solicitation.

G.S. 133-32 and Executive Order 24 (2009) prohibit the offer to, or acceptance by, any State Employee associated with the preparing plans, specifications, estimates for public Contract; or awarding or administering public Contracts; or inspecting or supervising delivery of the public Contract of any gift from anyone with a Contract with the State, or from any person seeking to do business with the State. By execution of this bid response to the IFB, the undersigned certifies, for Vendor’s entire organization and its employees or agents, that Vendor are not aware that any such gift has been offered, accepted, or promised by any employees or agents of Vendor’s organization.

By executing this bid, Vendor certifies that it has read and agreed to the INSTRUCTION TO VENDORS and the NORTH CAROLINA GENERAL TERMS AND CONDITIONS incorporated herein. These documents can be accessed from the ATTACHMENTS page within this document.

Failure to execute/sign bid prior to submittal will render bid invalid and it WILL BE REJECTED. Late bids cannot be accepted.

COMPLETE/FORMAL NAME OF VENDOR:

STREET ADDRESS: P.O. BOX: ZIP:

CITY & STATE & ZIP: TELEPHONE NUMBER: TOLL FREE TEL. NO:

PRINCIPAL PLACE OF BUSINESS ADDRESS IF DIFFERENT FROM ABOVE (SEE INSTRUCTIONS TO VENDORS ITEM #21):

PRINT NAME & TITLE OF PERSON SIGNING ON BEHALF OF VENDOR: FAX NUMBER:

VENDOR’S AUTHORIZED SIGNATURE: DATE: E-MAIL:

Department of Transportation

Refer ALL Inquiries regarding this IFB to:

Michael Lingenfelter mwlingenfelter@ncdot.gov 919-707-2642

Invitation for Bids # 54-ML-12170721 Bids will be publicly opened: April 7, 2025, at 2:00 PM ET

Using Agency: NC Department of Transportation Commodity No. and Description: 301300 Structural Building Products- Treated Lumber Requisition No.: PR20345

Bid Number: 54-ML-12170721 Treated Lumber Vendor: ____________________________________

Ver: 11/2023 2

FOR STATE USE ONLY: Offer accepted and Contract awarded this _______ day of _______________, 2025, As indicated on the attached Certification, by ______________________________________________________

VALIDITY PERIOD

Offer shall be valid for at least ninety (90) days from date of bid opening, unless otherwise stated here: ______ days, or if extended by mutual agreement of the parties. Any withdrawal of this offer shall be made in writing, effective upon receipt by the agency issuing this

IFB.

BID ACCEPTANCE

If your bid is accepted, all provisions of this IFB, along with the written results of any negotiations, shall constitute the written agreement between the parties (“Contract”). The NORTH CAROLINA GENERAL TERMS AND CONDITIONS are incorporated herein and shall apply.

Depending upon the Goods or Services being offered, other terms and conditions may apply, as mutually agreed.

(Authorized Representative of Department of Transportation)

Ver: 11/2023 3

Table of Contents

1.0 PURPOSE AND BACKGROUND

2.0 GENERAL INFORMATION

2.1 INVITATION FOR BID DOCUMENT

2.2 E-PROCUREMENT FEE

2.3 NOTICE TO VENDORS REGARDING IFB TERMS AND CONDITIONS

2.4 IFB SCHEDULE

2.5 BID QUESTIONS

2.6 BID SUBMITTAL

2.7 BID CONTENTS

2.8 ALTERNATE BIDS

2.9 DEFINITIONS, ACRONYMS, AND ABBREVIATIONS

3.0 METHOD OF AWARD AND BID EVALUATION PROCESS

3.1 METHOD OF AWARD

3.2 CONFIDENTIALITY AND PROHIBITED COMMUNICATIONS DURING EVALUATION

3.3 BID EVALUATION PROCESS

3.4 PERFORMANCE OUTSIDE THE UNITED STATES

3.5 INTERPRETATION OF TERMS AND PHRASES

4.0 REQUIREMENTS

4.1 PRICING

4.2 PRODUCT IDENTIFICATION

4.3 TRANSPORTATION AND IDENTIFICATION

4.4 DELIVERY

4.5 WARRANTY

4.6 HUB PARTICIPATION

4.7 VENDOR’S REPRESENTATIONS

4.8 FINANCIAL STABILITY

4.9 AGENCY INSURANCE REQUIREMENTS MODIFICATION

5.0 PRODUCT SPECIFICATIONS

SPECIFICATIONS

5.2 CERTIFICATION AND SAFETY LABELS

5.3 DEVIATIONS

6.0 CONTRACT ADMINISTRATION

6.1 CONTRACT MANAGER

6.2 CONTINUOUS IMPROVEMENT

6.3 ACCEPTANCE OF WORK

6.4 INVOICES

6.5 DISPUTE RESOLUTION

6.6 PRODUCT RECALL

6.7 CONTRACT CHANGES

7.0 ATTACHMENTS

Ver: 11/2023 4

ATTACHMENT A: PRICING

ATTACHMENT B: INSTRUCTIONS TO VENDORS

ATTACHMENT C: NORTH CAROLINA GENERAL TERMS & CONDITIONS

ATTACHMENT D: HUB SUPPLEMENTAL VENDOR INFORMATION

ATTACHMENT E: RESERVED

ATTACHMENT F: LOCATION OF WORKERS UTILIZED BY VENDOR

ATTACHMENT G: CERTIFICATION OF FINANCIAL CONDITION

ATTACHMENT H: VENDOR REQUEST FOR EO50 PRICE-MATCHING

Ver: 11/2023 5

1.0 PURPOSE AND BACKGROUND

The purpose of this Invitation for Bid (IFB) is to obtain pricing from Vendors to furnish and deliver Treated Lumber to North Carolina Department of Transportation, Mitchell Bridge Maintenance, Spruce Pine, NC. The requested items are needed to maintain inventory.

The intent of this solicitation is to award an Agency Specific Contract.

Bids shall be submitted in accordance with the terms and conditions of this IFB and any addenda issues hereto.

2.0 GENERAL INFORMATION

2.1 INVITATION FOR BID DOCUMENT

The IFB is comprised of the base IFB document, any attachments, and any addenda released before Contract award, which are incorporated herein by reference.

2.2 E-PROCUREMENT FEE

ATTENTION: The E-Procurement fee may apply to this solicitation. See paragraph entitled ELECTRONIC PROCUREMENT of the North Carolina General Terms and Conditions.

General information on the E-Procurement Services can be found at: http://eprocurement.nc.gov/.

2.3 NOTICE TO VENDORS REGARDING IFB TERMS AND CONDITIONS

It shall be the Vendor’s responsibility to read the Instructions to Vendors, the North Carolina General Terms and Conditions, all relevant exhibits and attachments, and any other components made a part of this IFB and comply with all requirements and specifications herein. Vendors also are responsible for obtaining and complying with all Addenda and other changes that may be issued in connection with this IFB.

If Vendors have questions or issues, or exceptions regarding any component within this IFB, those must be submitted as questions in accordance with the instructions in the BID QUESTIONS Section. If the State determines that any changes will be made as a result of the questions asked, then such decisions will be communicated in the form of an IFB addendum. The State may also elect to leave open the possibility for later negotiation of specific provisions of the Contract that have been addressed during the question-and-answer period, prior to contact award.

Other than through this process or negotiation under 01 NCAC 05B.0503, the State rejects and will not be required to evaluate or consider any additional or modified terms and conditions submitted with Vendor’s bid. This applies to any language appearing in or attached to the document as part of the Vendor’s bid that purport to vary any terms and conditions or Vendors’ instructions herein or to render the bid non-binding or subject to further negotiation. Vendor’s bid shall constitute a firm offer that shall be held open for the period required herein (“Validity Period” above).

The State may exercise its discretion to consider Vendor proposed modifications. By execution and delivery of this IFB Response, the Vendor agrees that any additional or modified terms and conditions, whether submitted purposely or inadvertently, shall have no force or effect, and will be disregarded unless expressly agreed upon through negotiations and incorporated by way of a Best and Final Offer (BAFO). Noncompliance with, or any attempt to alter or delete, this paragraph shall constitute sufficient grounds to reject Vendor’s bid as nonresponsive.

2.4 IFB SCHEDULE

The table below shows the intended schedule for this IFB. The State will make every effort to adhere to this schedule.

Event Responsibility Date and Time

Issue IFB State March 26, 2025 Submit Written Questions Vendor April 1, 2025 Submit Bids Vendor April 7, 2025, by 2:00PM ET http://eprocurement.nc.gov/

Ver: 11/2023 6

Public bid opening for this solicitation will be conducted via conference call. Vendors may use the links below or use the call-in number to join the bid opening April 7, 2025, at 2:00 PM ET.

Microsoft Teams Need help?

Join the meeting now

Meeting ID: 284 635 107 197

Passcode: SQ6SN743

Dial in by phone

+1 984-204-1487,,500859380# United States, Raleigh

Find a local number

Phone conference ID: 500 859 380#

Join on a video conferencing device

Tenant key: ncgov@m.webex.com

Video ID: 118 169 389 9

More info

For organizers: Meeting options | Reset dial-in PIN

2.5 BID QUESTIONS

Upon review of the IFB documents, Vendors may have questions to clarify or interpret the IFB in order to submit the best bid possible. To accommodate the Bid Questions process, Vendors shall submit any such questions by the “Submit Written Questions” date and time provided in the IFB SCHEDULE Section above, unless modified by Addendum.

Written questions shall be e-mailed to mwlingenfelter@ncdot.gov by the date and time specified above. Vendors will enter “IFB # 54-LC-12161260 Questions” as the subject for the email. Question submittals will include a reference to the applicable IFB section and be submitted in a format shown below:

Reference Vendor Question

IFB Section, Page Number Vendor question …?

Questions received prior to the submission deadline date, the State’s response, and any additional terms deemed necessary by the State will be posted in the form of an addendum to the electronic Vendor Portal (eVP), https://evp.nc.gov, and shall become an Addendum to this IFB. No information, instruction or advice provided orally or informally by any State personnel, https://aka.ms/JoinTeamsMeeting?omkt=en-US https://teams.microsoft.com/l/meetup-join/19%3ameeting_MTY2ZmRhYjctZDFiNC00NDM4LTk4NzEtZDEzZTk1ZDMxNDMy%40thread.v2/0?context=%7b%22Tid%22%3a%227a7681dc-b9d0-449a-85c3-ecc26cd7ed19%22%2c%22Oid%22%3a%2215a62572-3b2d-4401-a9e3-d8e44277917e%22%7d tel:+19842041487,,500859380 https://dialin.teams.microsoft.com/c102d528-0544-4660-b869-294e85047e28?id=500859380 https://www.webex.com/msteams?confid=1181693899&tenantkey=ncgov&domain=m.webex.com https://teams.microsoft.com/meetingOptions/?organizerId=15a62572-3b2d-4401-a9e3-d8e44277917e&tenantId=7a7681dc-b9d0-449a-85c3-ecc26cd7ed19&threadId=19_meeting_MTY2ZmRhYjctZDFiNC00NDM4LTk4NzEtZDEzZTk1ZDMxNDMy@thread.v2&messageId=0&language=en-US https://dialin.teams.microsoft.com/usp/pstnconferencing https://evp.nc.gov/

Ver: 11/2023 7 whether made in response to a question or otherwise in connection with this IFB, shall be considered authoritative or binding.

Vendors shall rely only on written material contained in an Addendum to this IFB.

2.6 BID SUBMITTAL

IMPORTANT NOTE: This is an absolute requirement. Vendor shall bear the risk of late submission due to unintended or unanticipated delay. It is the Vendor’s sole responsibility to ensure its bid has been received as described in this IFB by the specified time and date of opening. The date and time of receipt will be marked on each bid when received. Any bid or portion thereof received after the bid submission deadline will be rejected.

All proposal responses shall be submitted electronically via the electronic Vendor Portal (eVP). Additional information can be found at the eVP updates for Vendors link: https://eprocurement.nc.gov/news-events/evp-updates-vendors.

Failure to submit a bid in strict accordance with these instructions shall constitute sufficient cause to reject a Vendor’s bid(s).

Vendors are strongly encouraged to allow sufficient time to upload bids.

Critical updated information may be included in Addenda to this IFB. It is important that all Vendors responding on this IFB periodically check the State’s eVP website for any Addenda that may be issued prior to the bid opening date. All Vendors shall be deemed to have read and understood all information in this IFB and all Addenda thereto.

2.7 BID CONTENTS

Vendors shall populate all attachments of this IFB that require the Vendor to provide information and include an authorized signature where requested. Failure to provide all required items, or Vendor’s submission of incomplete items, may result in the State rejecting Vendor’s bid, in the State’s sole discretion

Vendor IFB responses shall include the following items and attachments, which shall be arranged in the following order:

a) Completed and signed version of EXECUTION PAGES, along with the body of the IFB.

b) Signed receipt pages of any addenda released in conjunction with this IFB, if required to be returned.

c) Completed version of ATTACHMENT A: PRICING

d) Completed version of ATTACHMENT D: HUB SUPPLEMENTAL VENDOR INFORMATION

e) Completed version of ATTACHMENT F: LOCATION OF WORKERS UTILIZED BY VENDOR

f) Completed and signed version of ATTACHMENT G: CERTIFICATION OF FINANCIAL CONDITION

g) Completed and signed version of ATTACHMENT H: VENDOR REQUEST FOR EO50 PRICE-MATCHING, if applicable

2.8 ALTERNATE BIDS

Unless provided otherwise in this IFB, Vendor may submit alternate bids for comparable Goods, various methods or levels of Service(s), or that propose different options. Alternate bids must specifically identify the IFB requirements and advantage(s) addressed by the alternate bid. Any alternate bid, in addition to the marking described above, must be clearly marked with the legend: “Alternate Bid # 54-LC-12161260 [for ‘name of Vendor’]”. Each bid must be for a specific set of Goods and Services and must include specific pricing. If a Vendor chooses to respond with various offerings, each must be offered with a separate price and be contained in a separate bid. Each bid must be complete and independent of other bids offered.

2.9 DEFINITIONS, ACRONYMS, AND ABBREVIATIONS

Relevant definitions for this IFB are provided in 01 NCAC 05A .0112 and in the Instructions to Vendors referenced below which are incorporated herein by this reference.

https://eprocurement.nc.gov/news-events/evp-updates-vendors

Ver: 11/2023 8

3.0 METHOD OF AWARD AND BID EVALUATION PROCESS

3.1 METHOD OF AWARD

North Carolina G.S. 143-52 provides a general list of criteria the State shall use to award contracts, as supplemented by the additional criteria herein. The Goods or Services being procured shall dictate the application and order of criteria; however, all award decisions shall be in the State’s best interest.

All responsive bids will be reviewed, and award or awards will be based on the responsive bid(s) offering the lowest price that meets the specifications to include any required verifications set out herein such as but not limited to past performance, references, and financial documents.

While the intent of this IFB is to award a Contract(s) to a single Vendor for all line items, the State reserves the right to make separate awards to different Vendors for one or more line items, to not award one or more line items or to cancel this IFB in its entirety without awarding a Contract, if it is considered to be most advantageous to the State to do so.

If a Vendor selected for award is determined by the State to be a non-resident of North Carolina, all responsive bids will be reviewed to determine if any of them were submitted by a North Carolina resident Vendor who requested an opportunity to match the price of the winning bid, pursuant to Executive Order #50 and G.S. 143-59 (for more information, please refer to ATTACHMENT H: VENDOR REQUEST FOR EXECUTIVE ORDER #50 PRICE MATCHING. If such bid(s) are identified, the State will then determine whether any such bid falls within the price-match range, and, if so, make a Contract award in accordance with the process that implements G.S. 143-59 and Executive Order #50.

The State reserves the right to waive any minor informality or technicality in bids received.

3.2 CONFIDENTIALITY AND PROHIBITED COMMUNICATIONS DURING EVALUATION

While this IFB is under evaluation, the responding Vendor, including any subcontractors and suppliers, is prohibited from engaging in conversations intended to influence the outcome of the evaluation. See the Paragraph 29 of the Instructions to Vendors entitled COMMUNICATIONS BY VENDORS.

Each Vendor submitting a bid to this IFB, including its employees, agents, subcontractors, suppliers, subsidiaries and affiliates, is prohibited from having any communications with any person inside or outside the using agency; issuing agency; other government agency office or body (including the purchaser named above, any department secretary, agency head, members of the General Assembly and Governor’s office); or private entity, if the communication refers to the content of Vendor’s bid or qualifications, the content of another Vendor’s proposal, another Vendor’s qualifications or ability to perform a resulting contract, and/or the transmittal of any other communication of information that could be reasonably considered to have the effect of directly or indirectly influencing the evaluation of proposals, the award of a contract, or both.

Any Vendor not in compliance with this provision shall be disqualified from evaluation and award. A Vendor’s proposal may be disqualified if its subcontractor and/or supplier engage in any of the foregoing communications during the time that the procurement is active (i.e., the issuance date of the procurement until the date of contract award or cancellation of the procurement). Only those discussions, communications or transmittals of information authorized or initiated by the issuing agency for this IFB, or inquiries directed to the purchaser named in this IFB regarding requirements of the IFB (prior to proposal submission) or the status of the award (after submission) are excepted from this provision.

3.3 BID EVALUATION PROCESS

Only responsive submissions will be evaluated.

The State will conduct an evaluation of responsive Bids, as follows:

Bids will be received according to the method stated in the Bid Submittal section above.

Ver: 11/2023 9

All bids must be received by the issuing agency not later than the date and time specified in the IFB SCHEDULE Section above, unless modified by Addendum. Vendors are cautioned that this is a request for offers, not an offer or request to contract, and the State reserves the unqualified right to reject any and all offers at any time if such rejection is deemed to be in the best interest of the State.

At the date and time provided in the IFB SCHEDULE Section above, unless modified by Addendum, the bids from each responding Vendor will be opened publicly and all offers (except those that have been previously withdrawn, or voided bids) will be tabulated. The tabulation shall be made public at the time it is created. When negotiations after receipt of bids is authorized pursuant to G.S. 143-49 and 01 NCAC 05B.0503, only the names of offerors and the Goods and Services offered shall be tabulated at the time of opening. If negotiation is anticipated, cost and price shall become available for public inspection at the time of the award. Interested parties are cautioned that these costs and their components are subject to further evaluation for completeness and correctness and therefore may not be an exact indicator of a vendor’s pricing position.

At their option, the evaluators may request oral presentations or discussions with any or all Vendors for clarification or to amplify the materials presented in any part of the bid. Vendors are cautioned, however, that the evaluators are not required to request presentations or other clarification—and often do not. Therefore, all bids should be complete and reflect the most favorable terms available from the Vendor. Prices bid cannot be altered or modified as part of a clarification.

Bids will generally be evaluated, based on completeness, content, cost and responsibility of the Vendor to supply the requested Goods and Services. Specific evaluation criteria are listed in Section 3.1 METHOD OF AWARD.

Upon completion of the evaluation process, the State will make Award(s) based on the evaluation and post the award(s) to the State’s eVP website under the IFB number for this solicitation. Award of a Contract to one Vendor does not mean that the other bids lacked merit, but that, all factors considered, the selected bid was deemed most advantageous and represented the best value to the State.

The State reserves the right to negotiate with one or more Vendors, or to reject all original offers and negotiate with one or more sources of supply that may be capable of satisfying the requirement, and in either case to require Vendor to submit a Best and Final Offer (BAFO) based on discussions and negotiations with the State.

3.4 PERFORMANCE OUTSIDE THE UNITED STATES

Vendor shall complete ATTACHMENT F: LOCATION OF WORKERS UTILIZED BY VENDOR. In addition to any other evaluation criteria identified in this IFB, the State may also consider, for purposes of evaluating proposed or actual contract performance outside of the United States, how that performance may affect the following factors to ensure that any award will be in the best interest of the State:

a) Total cost to the State

b) Level of quality provided by the Vendor

c) Process and performance capability across multiple jurisdictions

d) Protection of the State’s information and intellectual property

e) Availability of pertinent skills

f) Ability to understand the State’s business requirements and internal operational culture

g) Particular risk factors such as the security of the State’s information technology

h) Relations with citizens and employees

i) Contract enforcement jurisdictional issues

3.5 INTERPRETATION OF TERMS AND PHRASES

This IFB serves two functions: (1) to advise potential Vendors of the parameters of the solution being sought by the State; and

(2) to provide (together with other specified documents) the terms of the Contract resulting from this procurement. The use of phrases such as “shall,” “must,” and “requirements” are intended to create enforceable contract conditions. In determining whether bids should be evaluated or rejected, the State will take into consideration the degree to which Vendors have proposed or failed to propose solutions that will satisfy the State’s needs as described in the IFB. Except as specifically stated in the IFB, Ver: 11/2023 10 no one requirement shall automatically disqualify a Vendor from consideration. However, failure to comply with any single requirement may result in the State exercising its discretion to reject a bid in its entirety.

4.0 REQUIREMENTS

This Section lists the requirements related to this IFB. By submitting a bid, the Vendor agrees to meet all stated requirements in this Section, as well as any other specifications, requirements, and terms and conditions stated in this IFB. If a Vendor is unclear about a requirement or specification or believes a change in a requirement would allow for the State to receive a better bid, the Vendor is encouraged to submit these items in the form of a question during the question-and-answer period in accordance with the Bid Questions Section above.

4.1 PRICING

Bid price shall constitute the total cost to the State for delivery fully assembled and ready for use, including all applicable charges for shipping, delivery, handling, administrative and other similar fees. Complete ATTACHMENT A: PRICING FORM and include in Vendor’s response.

4.2 PRODUCT IDENTIFICATION

SUITABILITY FOR INTENDED USE

Vendors are requested to offer only items directly complying with the specifications herein or comparable items which will provide the equivalent capabilities, features and diversity called for herein. The State reserves the right to evaluate all bids for suitability for the required use and to award the one best meeting requirements and considered to be in the State’s best interest.

4.3 TRANSPORTATION AND IDENTIFICATION

The Vendor shall deliver Free-On-Board (FOB) Destination to any requested location within the State of North Carolina with all transportation costs and fees included in the total bid price.

When an order is placed using a purchase order, the purchase order number shall be shown on all packages and shipping manifests to ensure proper identification and payment of invoices. If an order is placed without using a purchase order, such as via phone, the Buyer’s name shall be show on all packages. A complete packing list shall accompany each shipment. Vendors shall not ship any products until they have received an order.

4.4 DELIVERY

The Vendor shall deliver Free-On-Board (FOB) Destination to the following location(s):

Mitchell Bridge Maintenance 902 Greenwood Rd

Spruce Pine, NC 28777

*24 HOUR DELIVERY NOTICE REQUIRED, contact Adam Cain @ 828-765-2449 or Justin Rice @ 828-250-3360*

**Delivery shall be Monday through Friday 7:00am-3:00pm**

Vendor should complete delivery within sixty (60) consecutive calendar days after receipt of purchase order.

For completion by Vendor: Delivery will be made from __________________________________________ (city, state) within _____ consecutive calendar days after receipt of purchase order. Promptness of delivery may be used as a factor in the award criteria.

4.5 WARRANTY

The manufacturer’s standard warranty shall apply. Vendors shall provide a copy of the manufacturer’s standard warranty upon request from NCDOT.

Ver: 11/2023 11

4.6 HUB PARTICIPATION

Pursuant to North Carolina General Statute G.S. 143-48, it is State policy to encourage and promote the use of small, minority, physically handicapped, and women contractors in purchasing Goods and Services. As such, this IFB will serve to identify those Vendors that are minority owned or have a strategic plan to support the State’s Historically Underutilized Business program by meeting or exceeding the goal of 10% utilization of diverse firms as 1st or 2nd tier subcontractors. Vendor shall complete

ATTACHMENT D: HUB SUPPLEMENTAL VENDOR INFORMATION.

4.7 VENDOR’S REPRESENTATIONS

If the bid results in an award, Vendor agrees that it will not enter any agreement with a third party that may abridge any rights of the State under the Contract. If any Services, deliverables, functions, or responsibilities not specifically described in this solicitation are required for Vendor’s proper performance, provision and delivery of the Service and deliverables under a resulting Contract, or are an inherent part of or necessary sub-task included within such service, they will be deemed to be implied by and included within the scope of the contract to the same extent and in the same manner as if specifically described in the Contract. Unless otherwise expressly provided herein, Vendor will furnish all of its own necessary management, supervision, labor, facilities, furniture, computer and telecommunications equipment, software, supplies and materials necessary for the Vendor to provide and deliver the Services and/or other Deliverables. ½

4.8 FINANCIAL STABILITY

As a condition of contract award, the Vendor must certify that it has the financial capacity to perform and to continue to perform its obligations under the Contract; that Vendor has no constructive or actual knowledge of an actual or potential legal proceeding being brought against Vendor that could materially adversely affect performance of this Contract; and that entering into this Contract is not prohibited by any contract, or order by any court of competent jurisdiction

Each Vendor shall certify it is financially stable by completing the ATTACHMENT G: CERTIFICATION OF FINANCIAL CONDITION.

The State is requiring this certification to minimize potential performance issues from contracting with a Vendor that is financially unstable. This Certification shall be deemed continuing, and from the date of the Certification to the expiration of the Contract, the Vendor shall notify the State within thirty (30) days of any occurrence or condition that materially alters the truth of any statement made in this Certification.

4.9 AGENCY INSURANCE REQUIREMENTS MODIFICATION

A. Default Insurance Coverage from the General Terms and Conditions applicable to this Solicitation:

☒ Contract value in excess of the Small Purchase threshold, but up to $1,000,000.00

5.0 PRODUCT SPECIFICATIONS

SPECIFICATIONS

The specific items and any specifications that the Purchasing Agency is seeking are listed below. Items offered by the Vendor must meet or exceed the listed Specifications.

Treated Lumber and Post in compliance with N.C. Department of Transportation Standard Specifications for Roads and Structures, January 2024, and any addenda thereto.

All Structural Timber and Lumber is to be inspected, approved, and stamped by a Firm listed on the NCDOT Materials and Test Vendor List. For a list of approved Inspectors (Producers/Supplier), please go to https://apps.ncdot.gov/vendor/approvedproducts/Producer.aspx.

For completion by Vendor: Inspector (Producer/Supplier) Utilized ____________________________________________ to inspect, approve, and stamp Structural Timber and Lumber.

https://apps.ncdot.gov/vendor/approvedproducts/Producer.aspx

Ver: 11/2023 12

Item # Specifications

2” x 6” x 18’ Treated Lumber

• Southern Yellow Pine

• Grade No. 1 Dense

• S1S1E

• 0.60 CCA

2” x 6” x 16’ Treated Lumber

• Southern Yellow Pine

• Grade No. 1 Dense

• S1S1E

• 0.60 CCA

2” x 6” x 20’ Treated Lumber

• Southern Yellow Pine

• Grade No. 1 Dense

• S1S1E

• 0.60 CCA

1.5” x 8” x 18’ Treated Lumber

• Southern Yellow Pine

• Grade No. 1 Dense

• S1S1E

• 0.60 CCA

12” x 12” x 30’ Treated Lumber

• Southern Yellow Pine

• Grade No. 1 Dense

• S1S1E

• 0.60 CCA

4” x 10” x 30’ Treated Lumber

• Southern Yellow Pine

• Grade No. 1 Dense

• S1S1E

• 0.60 CCA

N.C. Department of Transportation Standard Specifications for Roads and Structures, January 2024

SECTION 1082

STRUCTURAL TIMBER AND LUMBER

1082-1 GENERAL

Ver: 11/2023 13

Use Southern Pine timber and lumber graded in accordance with the current grading rules of the Southern Pine Inspection Bureau unless otherwise specified or approved by the Engineer. Use stress rated grades equal to or higher than the grades specified in this section or as otherwise specified in the contract. For temporary crossings, the use of stress rated lumber having stress ratings below those specified may be used if approved by the Engineer.

Have all wood products, including any preservative treatment, inspected and/or tested by an NCDOT approved commercial inspection company before it is delivered to the project. Provide industry standard commercial inspection reports and treatment test reports for each shipment of treated wood products before its use on the project. Perform inspections of preservative treated materials in accordance with American Wood Protection Association (AWPA) Standard M2. In addition, brand, hammer mark, ink stamp or tag each piece with the inspection company’s unique mark to indicate it has been inspected. All inspections shall be completed at no cost to the Department.

1082-2 UNTREATED TIMBER AND LUMBER

Lumber that is 2 inches to 4 inches thick and 2 inches to 4 inches wide shall conform to Structural Light Framing, Grade No. 1 Dense MC19. Lumber that is 2 inches to 4 inches thick and 6 inches wide or wider shall conform to Structural Joists and Planks, Grade No. 1 Dense MC19. Lumber that is 5 inches and thicker along the least dimension shall conform to Dense or Select Structural (Sel Str). Rough lumber will be acceptable except where surfacing is called for by the contract. Rough lumber may vary ± 1/4 inch from the dimensions shown on the contract or bill of material.

1082-3 TREATED TIMBER AND LUMBER

(A) General

Grade marked lumber will not be required. Brand or ink stamp each piece of treated lumber in accordance with the AWPA Standard M6. After treatment, handle the timber and lumber carefully to avoid breaking through the treated layer. This includes using rope slings, without sudden dropping, breaking of the fibers, bruising, or penetrating the surface with tools or hooks. All drilled holes or cuts should be at least 1 foot above the earth to limit the potential for decay, with the exception of sign and guardrail end unit posts which are allowed.

(B) Bridges, Fender Systems and Piles

Lumber for bridges or fender systems that is 2 inches to 4 inches thick and 2 inches to 4 inches wide shall conform to Structural Light Framing, Grade No. 1 Dense. Lumber for bridges or fender systems that is 2 inches to 4 inches thick and 6 inches wide and wider shall conform to Structural Joists and Planks, Grade No. 1 Dense. Timbers for bridges or fender systems that are 5 inches and thicker along the least dimension shall conform to Structural Lumber, Dense or Select Structural (Sel Str). Lumber for fender systems shall conform to Dense or Select Structural (Sel Str).

Timber for piles shall meet ASTM D25 except that the timber shall be Southern Pine.

Rough lumber will be acceptable except where surfacing is called for by the contract or bills of material. Rough lumber may vary ± 1/4 inch from the dimensions shown in the plans or bill of material.

(C) Guardrail Posts, Block outs and related components

Sawn timbers for guardrail posts, block outs and related components shall be Southern Pine, conforming to Grade No. 1. Rough lumber will be acceptable. An allowable tolerance of 3/8 inch scant will be permitted from nominal dimensions.

(D) Fence Posts and Braces

Sawn fence posts and braces shall be Southern Pine, S4S, and conform to Grade No. 2 for posts up to 4 inches x 4 inches in cross section, and Grade No. 1 for posts larger than 4-inch x 4 inch in cross section.

Round posts and braces shall meet Sub article 1050-2(A).

Ver: 11/2023 14

(E) Signposts and Battens

Lumber for sign posts no larger than 4 inches x 4 inches shall conform to Structural Light Framing, Grade No. 1.

Lumber for signposts larger than 4 inches x 4 inches and lumber for sign battens shall conform to Timbers, Grade No. 1. Use fully dressed S4S lumber for signposts and battens.

A tolerance of 1/2 inch scant will be permitted from nominal dimensions of signposts. A tolerance of 1 inch under and 3 inches over will be permitted in the length of the post.

(F) Poles

Timber for poles shall meet ANSI O5.1 except the timber shall be either treated Southern Pine or treated Coastal Douglas Fir. Use 40 feet Class 3 poles unless otherwise specified in the contract.

1082-4 PRESERVATIVE TREATMENT

(A) General

All timber and lumber are required to be treated with a preservative treatment in accordance with AASHTO M 133 or AWPA Standards, using a wood preservative registered by the US Environmental Protection Agency under the Federal Insecticide, Fungicide and Rodenticide Act.

Preservative treated wood products will not be accepted for use unless they have been inspected and found satisfactory, both before and after treatment as provided in Article 1082-1 and shall be delivered to the project site in a condition acceptable to the Engineer.

Use treating plants that have laboratory facilities at the plant site for use of the inspector in accordance with AWPA Standard T1.

In areas of frequent human contact, the use of chromated copper arsenate (CCA) treated wood is not permitted.

Instead use material treated to the applicable AWPA Use Category with an appropriate preservative system permitted by EPA. “Frequent human contact” is defined as areas include decking, handrail and canopy posts, and rails of pedestrian bridges; other instances of human contact areas may include fencing, decorative borders, and other uses of treated wood at recreational facilities such as welcome centers, rest areas and weigh stations.

(B) Timber Preservatives

Use timber preservatives conforming to AASHTO M-133 or AWPA Standard U1, Section 4, Table 1.

(C) Bridges, Fender Systems and Piles

Treat timber and lumber for bridges and fender systems in accordance with AASHTO M-133 or AWPA Standard U1, Commodity Specification A: Sawn Products.

Treat piles in accordance with AWPA Standard U1, Commodity Specification E: Round Timber Piling.

(D) Guardrail Posts, Block outs and Related Components

Treat guardrail posts, block outs and related items in accordance with AASHTO M-133 or AWPA Standard U1, Commodity Specification A: Sawn Products, UC4B. The same type of preservative is to be used throughout the entire length of the project.

(E) Fence Posts and Braces

Treat sawn posts and braces in accordance with AASHTO M-133 or AWPA Standard U1, Commodity Specification A. Sawn Products, UC4B.

Treat round posts and braces in accordance with AASHTO M-133 or AWPA Standard U1, except require retention of preservative as below.

Ver: 11/2023 15

Before treatment, peel round posts and braces cleanly for their full length, remove all bark and cambium, and trim all knots and projections flush with the surface of the surrounding wood. Machine peeling will be permitted.

Cut the ends to the proper length before treatment.

The same type of preservative shall be used throughout the entire length of the project.

(F) Signposts and Battens

Treat signposts and battens in accordance with AASHTO M-133 or AWPA Standard U1, Commodity Specification A: Sawn Products UC4B.

The same type of preservative shall be used throughout the entire length of the project.

All timber shall have moisture content of not greater than 19% before treatment. Redry timber treated with chromated copper arsenate after treatment until it has moisture content of not greater than 25%.

(G) Poles

Treat poles in accordance with AASHTO M-133 or AWPA Standard U1, Commodity Specification D: Poles, UC4C.

The same type of preservative shall be used throughout the entire length of the project.

5.2 CERTIFICATION AND SAFETY LABELS

All manufactured items and/or fabricated assemblies subject to operation under pressure, operation by connection to an electric source, or operation involving a connection to a manufactured, natural, or LP gas source shall be constructed and approved in a manner acceptable to the appropriate state inspector which customarily requires the label or re-examination listing or identification marking of the appropriate safety standard organization; such as the American Society of Mechanical Engineers for pressure vessels; the Underwriters Laboratories and /or National Electrical Manufacturers’ Association for electrically operated assemblies; or the American Gas Association for gas operated assemblies, where such approvals of listings have been established for the type of device offered and furnished. Further, all items furnished shall meet all requirements of the Occupational Safety and Health Act (OSHA), and state and federal requirements relating to clean air and water pollution.

5.3 DEVIATIONS

The nature of all deviations from the Specifications listed herein shall be clearly described by the Vendor. Otherwise, it will be considered that items offered by the Vendor are in strict compliance with the Specifications provided herein, and the successful Vendor shall be required to supply conforming goods. Deviations shall be explained in detail on an attached sheet. However, no implication is made or intended by the State that any deviation will be acceptable. Do not list objections to the North Carolina General Terms and Conditions in this section.

6.0 CONTRACT ADMINISTRATION

All Contract Administration requirements are conditioned on an award resulting from this solicitation. This information is provided for the Vendor’s planning purposes

6.1 CONTRACT MANAGER

The Vendor should be required to designate and make available to the State a contract manager. The contract manager shall be the State’s point of contact for Contract related issues and issues concerning performance, progress review, scheduling, and service.

Contract Manager Point of Contact

Name:

Ver: 11/2023 16

Office Phone #:

Mobile Phone #:

Email:

6.2 CONTINUOUS IMPROVEMENT

The State encourages the Vendor to identify opportunities to reduce the total cost the State. A continuous improvement effort consisting of various ideas to enhance business efficiencies as performance progresses.

6.3 ACCEPTANCE OF WORK

Performance of the work and delivery of Goods shall be conducted and completed at least in accordance with the Contract requirements and recognized and customarily accepted industry practices. Performance shall be considered complete when the Services or Goods are approved as acceptable by the Contract Administrator.

Acceptance of work products shall be based on the following criteria: N.C. Department of Transportation Standard Specifications for Roads and Structures, January 2024, Section 1082, Structural Timber and Lumber, and conformance with all other listed specifications.

The State shall have the obligation to notify Vendor, in writing ten (10) calendar days following completion of such work or delivery of a deliverable described in the Contract that it is not acceptable. The notice shall specify in reasonable detail the reason(s) it is unacceptable. Acceptance by the State shall not be unreasonably withheld; but may be conditioned or delayed as required for reasonable review, evaluation, installation, or testing, as applicable to the work or deliverable. Final acceptance is expressly conditioned upon completion of all applicable assessment procedures. Should the work or deliverables fail to meet any specifications, acceptance criteria or otherwise fail to conform to the Contract, the State may exercise any and all rights hereunder, including, for Goods deliverables, such rights provided by the Uniform Commercial Code, as adopted in North Carolina.

6.4 INVOICES

Vendor shall invoice the Purchasing Agency. The standard format for invoicing shall be Single Invoices meaning that the Vendor shall provide the Purchasing Agency with an invoice for each order. Invoices shall include detailed line-item information to allow Purchasing Agency to verify pricing at point of receipt matches the correct price from the original date of order. At a minimum, the following fields shall be included on all invoices:

Vendor’s Billing Address, Customer Account Number, NC Contract Number, Order Date, Buyer’s Order Number, Manufacturer Part Numbers, Vendor Part Numbers, Item Descriptions, Price, Quantity, and Unit of Measure.

Mail Invoices to: NCDOT Bridge Maintenance Division 13 20 Old Hwy 74 Ashville, NC 28803 Or email invoices to: sdnelon1@ncdot.gov and jrrice@ncdot.gov

INVOICES MAY NOT BE PAID UNTIL AN INSPECTION HAS OCCURRED AND THE GOODS ACCEPTED.

6.5 DISPUTE RESOLUTION

During the performance of the Contract, the Parties agree that it is in their mutual interest to resolve disputes informally. Any claims by the Vendor shall be submitted in writing to the State’s Contract Manager for resolution. Any claims by the State shall be submitted in writing to the Vendor’s Project Manager for resolution. The Parties shall agree to negotiate in good faith and use all reasonable efforts to resolve such dispute(s).

Ver: 11/2023 17

During the time the Parties are attempting to resolve any dispute, each shall proceed diligently to perform their respective duties and responsibilities under this Contract. The Parties will agree on a reasonable amount of time to resolve a dispute. If a dispute cannot be resolved between the Parties within the agreed upon period, either Party may elect to exercise any other remedies available under the Contract, or at law. This provision, when agreed in the Contract, shall not constitute an agreement by either party to mediate or arbitrate any dispute.

6.6 PRODUCT RECALL

Vendor expressly assumes full responsibility for prompt notification to the Buyer listed on the face of this IFB of any product recall in accordance with the applicable state or federal regulations. The Vendor shall support the State, as necessary, to promptly replace any such products, at no cost to the State.

6.7 CONTRACT CHANGES

Contract changes, if any, over the life of the Contract shall be implemented by contract amendments agreed to in writing by the State and Vendor. Amendments to the contract can only be made through the contract administrator.

The remainder of this page is intentionally left blank

Ver: 11/2023 18

7.0 ATTACHMENTS

ATTACHMENT A: PRICING

Complete and return the Pricing associated with this IFB, which can be found in the table below:

Item # QTY UOM DESCRIPTION UNIT PRICE EXTENDED PRICE

1 150 EA

2” x 6” x 18’ Treated Lumber

• Southern Yellow Pine

• Grade No. 1 Dense

• S1S1E

• 0.60 CCA

2 50 EA

2” x 6” x 16’ Treated Lumber

• Southern Yellow Pine

• Grade No. 1 Dense

• S1S1E

• 0.60 CCA

3 50 EA

2” x 6” x 20’ Treated Lumber

• Southern Yellow Pine

• Grade No. 1 Dense

• S1S1E

• 0.60 CCA

4 100 EA

1.5” x 8” x 18’ Treated Lumber

• Southern Yellow Pine

• Grade No. 1 Dense

• S1S1E

• 0.60 CCA

5 20 EA

12” x 12” x 30’ Treated Lumber

• Southern Yellow Pine

• Grade No. 1 Dense

• S1S1E

• 0.60 CCA

6 100 EA

4” x 10” x 30’ Treated Lumber

• Southern Yellow Pine

• Grade No. 1 Dense

• S1S1E

• 0.60 CCA

TOTAL EXTENDED PRICE: $ __________________________

Ver: 11/2023 19

**IMPORTANT NOTICE**

RETURN THE REQUIRED ATTACHMENTS WITH YOUR RESPONSE

FOLLOW THE LINKS TO ACCESS EACH ATTACHMENT

Ver: 11/2023 20

ATTACHMENT B: INSTRUCTIONS TO VENDORS

The Instructions to Vendors, which are incorporated herein by this reference, may be found here:

https://ncadmin.nc.gov/formnorth-carolina-instructions-vendors032023/download?attachment

ATTACHMENT C: NORTH CAROLINA GENERAL TERMS & CONDITIONS

The North Carolina General Terms and Conditions, which are incorporated herein by this reference, may be found here:

https://www.doa.nc.gov/form-north-carolina-general-terms-and-conditions-11-2023/open

ATTACHMENT D: HUB SUPPLEMENTAL VENDOR INFORMATION

Complete and return the Historically Underutilized Businesses (HUB) Vendor Information form, which can be found at the following link:

https://www.doa.nc.gov/pandc/onlineforms/form-hub-supplemental-vendor-information-9-2021/download

(THIS ATTACHMENT MUST BE COMPLETED AND RETURNED)

ATTACHMENT E: RESERVED

ATTACHMENT F: LOCATION OF WORKERS UTILIZED BY VENDOR

Complete and return the Location of Workers Utilized by Vendor, which can be found at the following link:

https://www.doa.nc.gov/pandc/onlineforms/form-location-workers-09-2021/download

(THIS ATTACHMENT MUST BE COMPLETED AND RETURNED)

ATTACHMENT G: CERTIFICATION OF FINANCIAL CONDITION

Complete, sign, and return the Certification of Financial Condition, which can be found at the following link:

https://www.doa.nc.gov/pandc/onlineforms/form-certification-financial-condition-09-2021/download

(THIS ATTACHMENT MUST BE COMPLETED AND RETURNED)

ATTACHMENT H: VENDOR REQUEST FOR EO50 PRICE-MATCHING

Complete, sign, and return the Vendor Request for EO50 Price-Matching, which can be found at the following link:

https://files.nc.gov/ncdoa/pandc/OnlineForms/Form_Vendor-Price-Matching-Opportunity_09.2021.pdf

(THIS ATTACHMENT TO BE COMPLETED AND RETURNED ONLY WHEN VENDOR IS ELIGIBLE)

*** Failure to Return the Required Attachments May Eliminate Your Response from Further Consideration *** https://ncadmin.nc.gov/formnorth-carolina-instructions-vendors032023/download?attachment https://urldefense.com/v3/__https:/www.doa.nc.gov/form-north-carolina-general-terms-and-conditions-11-2023/open__;!!OrxsNty6D4my!-C7mmXGditS_q2Dq3xD-Jyx5847LGHkCfu2N1vFsNjRbeKVng4vBk871pre2BvvhY0u8e64f70a7pkiALIu6JOKVLdt0p43_IGvjQA$…