Amendment_0001.pdf

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment your desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE

2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO. (If applicable)

7. ADMINISTERED BY (If other than Item 6) CODE

STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243

FACILITY CODE

9A. AMENDMENT OF SOLICITATION

NO.

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended, is not extended.

12. ACCOUNTING AND APPROPRIATION DATA (If required) copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO.

IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15C. DATE SIGNED

15A. NAME AND TITLE OF SIGNER (Type or print)

16C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

PAGE OF PAGES

6. ISSUED BY CODE

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code) (X)

CODE

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

NSN 7540-01-152-8070

Previous edition unusable

HSCG85-15-Q-P45767

Amendment 0001

USCGC VISE (WLIC 75305) and Barge (68012)

This Amendment answers the following questions. See below:

1. QUESTION: Work Item 20, Umbilical Receptacles & Deck Penetrations, Barge, Replace.

Paragraph 3.8 states “Drawing 75-WAGL 6000-1. A draft of this drawing is available as an AutoCAD drawing format file and also may be viewed with Adobe Acrobat Reader by double clicking on this icon: 75-WAGL 6000-1.pdf.” Please provide the drawing.

ANSWER: Drawing may be requested by contacting Natalie Rodriguez via email at Natalie.J.Rodriguez@uscg.mil.

2. QUESTION: Work Item 2, Hull Fitting (Mooring and Towing), Inspect and Test, Tender;

Work Item D-003, Hull Fittings (Mooring and Towing),, Inspect and Test Barge; and Work Item D-009 Hull Fittings Weight Handling Rigging Hardware, Inspect and Test- Barge.

Items request the contractor to perform visual inspection and NDE of deck fittings that does not require paint removal. Performing even a visual inspection w/o removal of existing coatings will provide minimal results at best. The accepted NDE practices regularly used in this situation are Dye Pen or Magnetic Particle. The removal of coatings is required to perform these processes. The coating system utilized in the areas requires blasting in order to apply Inorganic zinc after testing. There are several items (work items 1, 4 &7) already written in this package that require blasting and coating on the vessel. Addressing these 3 items at the same period will provide a better product at reasonable cost.

ANSWER: Paint removal is necessary for a detailed inspection. Blasting is required for the inorganic zinc that is applied to the construction deck and fittings attached to this deck should have the same coating system.

All other terms and conditions remain unchanged.

This Amendment incorporates the following changes:

See Continuation page

1301 CLAY STREET, SUITE 800N

OAKLAND, CA 94612