Tech_Pub_3238A_521_A,_PG_24,_31.pdf

MODELS 411 & 481, 412, 413 & 483

(AS VIEWED FROM INBOARD END)(AS VIEWED FROM INBOARD END)

ROTATIONROTATION

CURVE OF IMPELLERCURVE OF IMPELLER

BLADEBLADE

7878 7878

64†64†

666657†57†

3939 1010

37371818

35A*35A*

76767777

23236868

OMITTED WHENOMITTED WHEN

MECHANICAL SEALMECHANICAL SEAL

IS USEDIS USED

SINGLE SEALSINGLE SEAL

COLLARCOLLAR

SEAL COMPONENTSSEAL COMPONENTS

5555 5454

SUCTIONSUCTION

OUTBOARDOUTBOARD

GROUPGROUP

INBOARDINBOARD

GROUPGROUP

DISCHARGEDISCHARGE

PC. NO. 7 NOT REQUIRED FOR PS #1 & #2. REFER PC. NO. 68.PC. NO. 7 NOT REQUIRED FOR PS #1 & #2. REFER PC. NO. 68.

PC. NO. 68 FOR PS #1 & #2 ONLY. FOR OTHER PS REFER PC. NO. 7.PC. NO. 68 FOR PS #1 & #2 ONLY. FOR OTHER PS REFER PC. NO. 7.

* POWER FRAMES 6B, 7A & 7 ONLY.* POWER FRAMES 6B, 7A & 7 ONLY.

PC. NO. 7 NOT REQUIRED FOR PS #1 & #2. REFER PC. NO. 68.PC. NO. 7 NOT REQUIRED FOR PS #1 & #2. REFER PC. NO. 68.

PC. NO. 68 FOR PS #1 & #2 ONLY. FOR OTHER PS REFER PC. NO. 7.PC. NO. 68 FOR PS #1 & #2 ONLY. FOR OTHER PS REFER PC. NO. 7.

† FOR 10x12x18D, SHAFT SLEEVE CONSISTS OF PC. NO. 79, PC. NO. 60, PC. NO. 64 AND PC. NO. 72. † FOR 10x12x18D, SHAFT SLEEVE CONSISTS OF PC. NO. 79, PC. NO. 60, PC. NO. 64 AND PC. NO. 72.

Figure 6. Model 413 & 483 Exploded View

NOTE

WHEN ORDERING SPARE PARTS ALWAYS INCLUDE THE PUMP TYPE, SIZE, SERIAL NUMBER AND THE PIECE

NUMBER FROM THIE EXPLODED VIEW IN THIS MANUAL.

ORDER ALL PARTS FROM YOUR LOCAL AUTHORIZED DISTRUBUTOR, FACTORY BRANCH SALES OFFICE OR

THE FACTORY AT NORTH AURORA, ILLINOIS.

Amendment 17