5342-01-408-5388_JOTFOC_PD.doc

SIMPLIFIED ACQUISITION PROCEDURES (SAP) JUSTIFICATION FOR OTHER THAN FULL AND OPEN COMPETITION (J&A) SOLICITATIONS MAY BE LIMITED TO ONE SOURCE ONLY IF THE CONTRACTING OFFICER DETERMINES THAT ONLY ONE SOURCE IS REASONABLY AVAILABILE. THIS DETERMINATION MUST BE SUPPORTED WITH FULL JUSTIFICATION FOR SOLE SOURCE FROM CUSTOMER. WHEN THE CUSTOMER DESCRIBES AN ITEM WITH A PURCHASE DESCRIPTION WHICH LIMITS THE AVAILABILITY TO ONE SOURCE, THE JUSTIFICATION MUST EXPLAIN WHY THE ITEM IS THE ONLY ONE THAT WILL MEET THE GOVERNMENT’S REQUIREMENT. STATEMENTS SUCH AS “ONLY KNOWN SOURCE” OR “ONLY SOURCE WHICH CAN MEET THE REQUIRED DELIVERY DATE” ARE INADEQUATE TO SUPPORT A SOLE SOURCE PURCHASE. THE CUSTOMER SHALL PROVIDE THE FOLLOWING INFORMATION:

PURCHASE REQUEST OR REQUISTION NUMBER

PR # 2117407B4500AN041

PROJECT/TASK NUMBER

ESTIMATED AMOUNT (OVER $3,000 BUT NOT EXCEEDING

$150,000)

BRIEF DESCRIPTION OF SUPPLIES OR SERVICES REQUIRED, AND THE INTENDED USE

Purchase of ten (10) Anode Kits, Corrosion Prevention, NSN: 5342-01-408-5388, P/N: W3T105513 OEM: EVOQUA WATER TECHNOLOGIES CORP. Cage: 89357

Corrosion Preventive Anode that is mounted on the hull of the 225' WLB & 240' WLBB for the Cathodic Protection System. Each (Kit) Contains the necessary components to replace1.

UNIQUE CHARACTERISTICS THAT LIMIT AVAILABILITY TO ONLY ONE SOURCE, WITH THE REASON NO OTHER SUPPLIES OR SERVICES CAN BE USED.

These Corrosion Prevention Anode Kits are put together specifically for our 225' WLB's & 240' WLBB. The kits include everything needed to properly fasten the anode to the hull of the ship. These Anodes prevent hull corrosion that inherently occurs over time due to the ships marine environment.

REASON THAT SUGGESTED SOURCE IS THE ONLY SOURCE WHICH CAN PROVIDE THE SUPPLIES OR SERVICES The Coast Guard did not purchase the manufacturer's proprietary data rights, and therefore, cannot determine with certainty that an alternative part number would mount to, interface with, or operate effectively with Coast Guard Cutters. Failure of an alternative part, not conforming to the OEM's specifications, could cause damage to the cutters. The manufacturing drawing and specifications have not been purchased by the Coast Guard.

EXPLAIN WHY AN ADEQUATE PURCHASE DESCRIPTION OR OTHER INFORMATION SUITABLE TO SOLICIT BY FULL AND OPEN COMPETITION HAS NOT BEEN DEVELOPED OR ARE NOT AVAILABLE EVOQUA WATER TECHNOLOGIES CORP is the Original Equipment Manufacturer (OEM) for these kits. When Coast Guard purchased the original equipment there were no requirements for manufacturer's drawings, detailed parts lists, design or testing procedures. OEM is only know manufacturer that has the techniques, design specifications, testing, quality assurance capability, and documentation necessary to manufacture these parts as used onboard Coast Guard Cutters.

PROVIDE A STATEMENT OF ACTIONS, IF ANY, THE GOVERNMENT MAY TAKE TO REMOVE OR OVERCOME ANY BARRIERS TO COMPETITION BEFORE FUTURE ACQUISITIONS ARE REQUIRED COR will continue to conduct market research with a focus on locating vendors that are able to meet requirements, however without technical data described above obtaining full and open competition will be difficult. The Coast Guard cannot require any vendor to release proprietary information.

SIGNATURE OF CONTRACTING OFFICER

CODE

TELEPHONE NUMBER

DATE

ONE LEVEL ABOUT CONTRACTING OFFICER

CODE

TELEPHONE NUMBER

DATE