P-243-0085_RevJ_Chng_1.pdf

REVISION No. J . CHANGE NO. 1 .

PURCHASE SPECIFICATION

FOR PROPULSION SHAFT SLEEVES

(VARIOUS VESSEL CLASSES)

P-243-0085

ORGINATED BY: E. R. Fischer . DATE: 04/91 .

UPDATED BY: Gary W. Pehrson (Change 1 to Revision J) . DATE: 04/10 .

ORIGINATOR’S COMMAND Engineering Logistics Center .

DEPARTMENT / DIVISION: Main Propulsion Branch (026) .

INTERNAL REVIEWER S. Hardsock & D. Heisey . DATE: 07/07 .

SWORB APPROVAL . DATE: .

USCG – SFLC

DATE 04/91

P-243-0085

REVISION: J 07/07

CHANGE: 1 04/10

PURCHASE SPECIFICATION FOR

PROPULSION SHAFT SLEEVES

(VARIOUS VESSEL CLASSES)

1.0 SCOPE

1.1. This purchase specification covers the construction, testing, and packaging of propulsion shaft sleeves used on Coast Guard vessels of various classes.

1.2. Classification – Sleeve DATA SHEET, Number, & Title.

SH. No. VESSEL TITLE

001 210 B Class Sleeve AFT Line Shaft 002 210 B Class Sleeve AFT Tail Shaft 003 210 B Class Sleeve FWD Line Shaft 004 210 B Class Sleeve FWD Tail Shaft 005 140 Class Sleeve AFT Propulsion Shaft 006 140 Class Sleeve FWD Propulsion Shaft

007 DELETED (REV H)

008 DELETED (REV H)

009 160 Class Sleeve Aft Propulsion Shaft

010 DELETED (REV H)

011 DELETED (REV H)

012 DELETED (REV H)

013 DELETED

014 DELETED (REV H)

015 210 A Class Sleeve AFT Tail Shaft 016 210 A Class Sleeve INT Tail Shaft 017 210 A Class Sleeve FWD Tail Shaft 018 160 Class Sleeve FWD Propulsion Shaft

019 DELETED (REV J)

020 378 (719 thru 726) Sleeve FWD Tail & AFT Stern Tube

Prop. Shaft.

021 378 (719 thru 726) Sleeve FWD Stern Tube Prop. Shaft.

022 378 (719 thru 726) Sleeve AFT Tail Prop. Shaft

023 DELETED (REV H)

024 DELETED

025 DELETED

026 270 AB Class Sleeve Tail Propulsion Shaft 027 270 AB Class Sleeve Tail Propulsion Shaft

P-243-0085

REVISION: J 07/07

028 270 AB Class Sleeve Tail Propulsion Shaft 029 270 AB Class Sleeve Tail Propulsion Shaft 030 75 Class Sleeve Propulsion Shaft 031 75 B Class Sleeve Propulsion Shaft 032 270 Class Sleeve Rudder Stock 033 378 (716 thru 726) Sleeve Rudder Stock 034 210 A Class Sleeve Line Shaft 035 210 A Class Sleeve FWD Line Shaft 036 225 Class Sleeve Stern Tube Propulsion Shaft 037 75E & 75C Tail Shaft Sleeves AFT & FWD 038 75F Tail Shaft Sleeves AFT & FWD 039 65WD& 65B Shaft Sleeves Aft, MID, & FWD on B 040 65WD Shaft Sleeve FWD

2.0 APPLICABLE DOCUMENTS

2.1. General – The documents listed in this section are specified in sections 3, 4, or 5 of this specification. This section does not include documents cited in other sections of this specification recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements cited in sections 3, 4, or 5 of this specification, whether or not they are listed.

2.2. Government Documents

2.2.1. SPECIFICATIONS, STANDARDS, PUBLICATIONS and HANDBOOKS – The following specifications and standards form a part of this specification to the extent specified herein. Unless otherwise specified, the versions in effect are those listed in the GSA Index of Federal Specifications, Standards and Commercial Item Descriptions or the current Department of Defense Single Stock Point of Specifications and Standards, (DODSSP) and supplements thereto, cited in the solicitation or contract.

2.3. Coast Guard Documents – The following documents form a part of this specification to the extent specified herein. The documents listed shall be by title and effective date unless otherwise documented.

2.3.1. USCG Surface Forces Logistics Center (SFLC)

a. D-000-0100 REV G, Dated-02/06, Bar Coding for USCG SFLC Material.

P-243-0085

REVISION: J 07/07

2.4. Commercial Documents – The Following documents form a part of this specification to the extent specified herein. The documents shall be the version listed by number and date from the referenced industry organization.

a. American National Standards Institute (ANSI)/ National Conference of Standards Laboratories (NCSL).

b. ANSI/NCSL Z540-1-1994 DATED 1994, Calibration Laboratories and Measuring and Test Equipment – General Requirements

2.4.2. American National Standards Institute (ANSI) / American Society for Quality Control (ASQC)

a. ANSI/ASQC Q9003-1994, DATED 1994 – Quality Systems – Model for Quality Assurance in Final Inspection and Test.

b. Society of Automotive Engineers (SAE)

c. SAE-J-448A, DATED 6/1963, Surface Texture Standard.

2.4.3. American Society for Testing and Materials (ASTM)

a. ASTM-E-1003-05 DATED 2005, Standard Test Method for Hydrostatic Leak Testing.

b. ASTM-B-369-06 DATED 2006, Standard Specification for Copper-Nickel Alloy Castings.

c. ASTM-D-3951-98 DATED 1998, Standard Practice for Commercial Packaging.

2.5. Specification Order of Precedence – In the event of a conflict between the text of this specification and the references cited herein, this specification shall take precedence.

2.6. Document Availability – To obtain the referenced documents see section 6.1.

3.0 REQUIREMENTS

3.1. Material, Construction & Testing – All sleeves produced under this specification shall be cast in accordance with specification ASTM-B-369 using UNS alloy C96400, centrifugal casting rotating mold only.

3.1.1. Only tests specified herein shall apply.

3.2. Sizes, Finish & Tolerances – The sleeves manufactured using this specification shall be finished as directed in the referenced sleeve data sheets and as directed herein.

P-243-0085

REVISION: J 07/07

3.2.1. Tolerances for the outside diameter (O.D), inside diameter (I.D.), & length (LG) shall be as listed here.

a. All O.D.’s, +0.050” – 0.000”

b. All I.D.’s, +0.000” - 0.020”

c. All Lengths, +0.250” - 0.000”

3.2.2. Finish & Run-out – All sleeves provided shall have a run-out of 0.002” variation per foot, but not to exceed a maximum of 0.010” for any sleeve.

a. All finishes shall be in accordance with SAE-J-448, and as listed herein unless otherwise specified on the sleeve data sheet.

1. O.D. – 1000 RMS or smoother

2. I.D. – 600 RMS or smoother

3.2.3. Concentricity – The O.D and I.D. of each sleeve shall be concentric with the axis of rotation to within 0.010” over the sleeve length.

3.3. Material Certification – The contractor shall provide a chemical analysis of the material used, to the Contracting Officer, for each delivery order.

3.3.1. If more than one heat is used, a chemical analysis of the content of each heat shall be provided.

3.3.2 Each chemical analysis shall be labeled with the applicable delivery order number and the ladle capacity.

3.3.3 The tests listed here are NOT required for any sleeve produced using this specification.

a. Mechanical tests.

b. Weldability tests.

3.4. Performance Characteristics – The shaft sleeves shall not exhibit any indications of porosity, and leakage during the hydro tests.

3.4.1. No repairs of sleeves shall be allowed, nor shall non-conforming sleeves be offered to the Coast Guard for acceptance.

3.5. Tests & Inspections – The contractor shall perform a hydrostatic test on each shaft sleeve produced under this specification in accordance with ASTM-E-1003.

3.5.1. This test shall maintain a minimum of 50 lbs of water pressure for a minimum of ten minutes. During this time sleeves shall show no signs of leakage or porosity.

3.5.2 Each sleeve shall be dimensionally inspected in accordance with Section 3.2 of this specification.

P-243-0085

REVISION: J 07/07

3.6. Notifications & Inspections – The contractor shall be responsible for notifying the

Contracting Officer at least seven (7) working days prior to said contractor being ready for any inspections or testing.

4.0 QUALITY ASSURANCE

4.1. General – The contractor shall maintain an inspection system which shall insure that each item offered to the Coast Guard for acceptance or approval conforms to the contract requirements. The inspection system shall be documented and meet the requirements of ANSI/ASQC-Q9003 and available for review by the Coast Guard.

4.2. Records – The contractor shall maintain records of all inspections and tests. The records at a minimum shall indicate the nature and number of observations made, the number and type of deficiencies found, and the corrective action taken.

4.3. Calibration System – The contractor, as well as any subcontractors, shall be required to maintain a test equipment calibration program in compliance with ANSI/NCSL Z540-1. The program shall be documented and traceable to the National Institute of Standards (NIST).

4.4. Responsibility for Inspection – The contractor shall be responsible for the performance of all inspection requirements specified herein. The contractor shall provide space, personnel, and test equipment for the conduct of all inspection requirements. All inspection and testing shall be performed at the contractor’s plant or at other facilities acceptable to the Coast Guard. The Coast Guard reserves the rights to verify or have performed any of the inspections that are deemed necessary to assure that supplies and services conform to the prescribed requirements.

4.5. Responsibility for Compliance – All items shall meet the requirements of this specification. The inspections set forth in this specification shall become part of the contractor’s overall inspection system or quality program. The absence of any inspection requirements in the specification shall not relieve the contractor of the responsibility of assuring that all products or supplies submitted to the government for acceptance comply with all requirements of the contract. Sampling for quality conformance does not authorize submission of known defective material (either indicated or actual) nor does it commit the government to acceptance of defective material.

4.6. Tests & Inspections – The inspections/tests required here and in the appropriate subsection in section 3 are the minimum required and are not intended to supplant any controls, examination, inspections or tests normally employed by the contractor to assure the quality of the item in question.

4.6.1. Hydrostatic Test. Section 3.5.1.

4.6.2. Dimensional Inspection Section 3.5.2.

P-243-0085

REVISION: J 07/07

4.6.3. Material Certification Section 3.3.

4.7. Failure Responsibility – If the specified item fails to pass any inspection/test the contractor shall report the failure and the recommended fix to the Contracting Officer.

If approved, the corrective action on the materials or processes shall be taken in accordance with this section.

4.7.1. General Statements

a. The Contracting Officer reserves the right to totally reject any failed item without considering any suggested corrective action.

b. The inspection/test shall be discontinued until all corrective action has been taken.

c. After all corrective actions have been taken the inspection/test shall be continued or repeated at the option of the Contracting Officer.

d. Acceptance shall be withheld until re-inspection has been shown that the corrective action was successful and the item satisfactorily passes all inspections and tests.

e. All corrective actions shall be documented as part of the contractor’s inspection system and submitted for approval to the Contracting Officer.

f. Each corrective action report shall include, but not be limited to the cause of each defect, corrective action suggested, and the steps taken to prevent a recurrence of each defect.

4.7.2. Test & Inspection Reports

a. One copy of any required inspection, test or tolerance check shall be sent to the

Contracting Officer.

b. A copy of any test, inspection or tolerance report shall be turned over to the Quality

Assurance Representative upon arrival at the contractors’ plant.

4.8. Packing Inspection – The Contracting Officer shall be notified prior to the packaging and marking of the completed units in accordance with Section 3.6 of this specification.

5.0 PRESERVATION, PACKAGING, & MARKING

5.1. Preservation – Each tested and approved sleeve or sleeve set shall be preserved as required in ASTM-D-3951.

5.2. Packaging - Each tested and approved sleeve or sleeve set shall be packaged in a totally enclosed wooden box (This unit Package shall equal a Shipping Container) padded as needed to prevent damage during shipping in accordance with ASTM-D- 3951.

P-243-0085

REVISION: J 07/07

5.3. Marking – Each preserved and packaged item shall be marked in the upper left-hand side of the two longest sides (two opposite sides if square) of each box. If the lettering is stenciled on the lettering shall be at least ¾” high, in black print lettering on a highly contrasting painted background. See the applicable data sheet(s) for the details.

5.3.1. This marking shall consist of the STOCK NUMBER, ITEM NAME, PART NUMBER, CONTRACT NUMBER, GROSS WEIGHT (in lbs.), condition code CONDITION “A”, unit of issue with quantity (i.e. 1-EA) DELIVERY ORDER NUMBER, and the words COAST GUARD SFLC MATERIAL.

5.4. Bar Coding – The Contractor shall supply bar code labels on all CLIN’s except for those that require data submissions only.

a. All bar coded labels shall be in accordance with SFLC specification D-000- 0100.

b. The actual labels shall be Type “V“. Grade “A“, Style “2“, Composition “b” with plastic laminate.

c. Each label shall contain encoded data for the Stock Number.

d. The marking required in Section 5.3 can be applied separately or as part of the

Bar Code Label.

6.0 NOTES

6.1. Coast Guard & Commercial Document Sources

6.1.1. Commercial Documents

a. Society of Automotive Engineers Inc. (SAE)

400 Commonwealth Drive Warrendale, PA 15096 1-877-606-7323

FAX: 1-724-776-0790

www.sae.org

b. American Society for Testing & Materials (ASTM) 100 Barr Harbor Drive West Conshohocken, PA 19428 610-832-9500

FAX: 610-832-9555

www.astm.org

c. American National Standards Institute (ANSI) 25 W. 43rd St.

(Between 5th and 6th Avenues) 4th Floor New York, NY 10036 http://www.sae.org/ http://www.astm.org/

P-243-0085

REVISION: J 07/07

212-642-4900

FAX: 212-398-0023

www.ansi.org

d. American Society for Quality Control (ASQC) 611 East Wisconsin Ave.

Milwaukee, WI 53202 414-272-8575

FAX: 414-272-1734

www.asq.com

6.1.2. Coast Guard Documents

a. USCG Surface Forces Logistics Center

2401 Hawkins Point Road Baltimore, MD 21226-5000 410-762-6471 (Andrea Brehon) ATTN: Contracting Branch, code 046 http://cgweb.sflc.uscg.mil http://www.ansi.org/ http://www.asq.com/ http://cgweb.sflc.uscg.mil/

USCG – SFLC DATA SHEET FOR SPECIFICATION P-243-0085

ORIGINAL: (4/91); REV: “J” (07/07); CHG: “1” (04/10)

DS 001 210 B CLASS AFT LINE SHAFT

Finish in accordance with SAE-J-448 Material in accordance with ASTM-B-369 PP&M in accordance with ASTM-D-3951 ITEM NAME – Sleeve, Aft Line Propulsion Shaft VESSEL USAGE – 210B Class

LENGTH: 41.500”

OUTSIDE DIAMETER: 10.100”

INSIDE DIAMETER: 8.140”

MARKING, shall be as shown below:

STOCK NUMBER 2010-01-094-8938

ITEM NAME Sleeve, Line Shaft AFT

PART NUMBER 620WPC-4301-55-B-PIECE 3

CONTRACT NUMBER See Contract Page 1 DELIVERY ORDER NUMBER See Contract SHIPPING WEIGHT As Determined by Contractor

CONDITION CODE CONDITION A

QUALITY & UNIT OF ISSUE 1-EA

COAST GUARD SFLC MATERIAL

DS 002 210 B CLASS AFT TAIL SHAFT

Finish in accordance with SAE-J-448 Material in accordance with ASTM-B-369 PP&M in accordance with ASTM-D-3951 ITEM NAME – Sleeve, Aft Tail Propulsion Shaft VESSEL USAGE – 210B Class

LENGTH: 54.500”

OUTSIDE DIAMETER: 10.100”

INSIDE DIAMETER: 8.765”

MARKING, shall be as shown below:

STOCK NUMBER 2010-01-222-9322

ITEM NAME Sleeve, Tail Shaft Aft PART NUMBER 620WPC-4301-54-C-Piece 3 CONTRACT NUMBER See Contract Page 1 DELIVERY ORDER NUMBER See Contract SHIPPING WEIGHT As Determined by Contractor

CONDITION CODE CONDITION A

DS 003 210 B CLASS FWD LINE SHAFT

Finish in accordance with SAE-J-448 Material in accordance with ASTM-B-369 PP&M in accordance with ASTM-D-3951 ITEM NAME – Sleeve, Fwd Line Propulsion Shaft

LENGTH: 29.500”

OUTSIDE DIAMETER: 10.100”

INSIDE DIAMETER: 8.010”

STOCK NUMBER 2010-01-187-1763

ITEM NAME Sleeve Line Shaft Fwd

PART NUMBER 620WPC-4301-55-BA2

CONTRACT NUMBER See Contract Page 1 DELIVERY ORDER NUMBER See Contract SHIPPING WEIGHT As Determined by Contractor

CONDITION CODE CONDITION A

DS 004 210 B CLASS FWD TAIL SHAFT

Finish in accordance with SAE-J-448 Material in accordance with ASTM-B-369 PP&M in accordance with ASTM-D-3951 ITEM NAME – Sleeve, Fwd Tail Propulsion Shaft

LENGTH: 40.500”

OUTSIDE DIAMETER: 10.130”

INSIDE DIAMETER: 8.640”

STOCK NUMBER 2010-01-222-9353

ITEM NAME Sleeve, FWD Tail Prop Shaft PART NUMBER 620WPC-4301-54-C-Piece 2 CONTRACT NUMBER See Contract Page 1 DELIVERY ORDER NUMBER See Contract SHIPPING WEIGHT As Determined by Contractor

CONDITION CODE CONDITION A

DS 005 140 AFT Propulsion Shaft

Finish in accordance with SAE-J-448 Material in accordance with ASTM-B-369 PP&M in accordance with ASTM-D-3951 ITEM NAME – Sleeve, Aft Propulsion Shaft

VESSEL USAGE – 140 (ALL)

LENGTH: 69.000”

OUTSIDE DIAMETER: 13.900”

INSIDE DIAMETER: 12.240”

STOCK NUMBER 3120-01-192-5796

ITEM NAME Sleeve, Aft Prop Shaft PART NUMBER 101WYTM243-001-Piece 3 CONTRACT NUMBER See Contract Page 1 DELIVERY ORDER NUMBER See Contract SHIPPING WEIGHT As Determined by Contractor

CONDITION CODE CONDITION A

QUALITY & UNIT OF ISSUE 1-EA

COAST GUARD SFLC MATERIAL

GWPehrson Highlight

DS 006 140’ FWD PROPULSION SHAFT

Finish in accordance with SAE-J-448 Material in accordance with ASTM-B-369 PP&M in accordance with ASTM-D-3951 ITEM NAME – Sleeve, Fwd, Propulsion Shaft

VESSEL USAGE – 140 (ALL)

LENGTH: 23.000”

OUTSIDE DIAMETER: 13.900”

INSIDE DIAMETER: 12.240”

STOCK NUMBER 3120-01-191-6376

ITEM NAME Sleeve, Fwd Prop Shaft PART NUMBER 101WYTM243-001-Piece 2 CONTRACT NUMBER See Contract Page 1 DELIVERY ORDER NUMBER See Contract SHIPPING WEIGHT As Determined by Contractor

CONDITION CODE CONDITION A

QUALITY & UNIT OF ISSUE 1-EA

COAST GUARD SFLC MATERIAL

GWPehrson Highlight

DS 009 160’ AFT PROPULSION SHAFT

Finish in accordance with SAE-J-448 Material in accordance with ASTM-B-369 PP&M in accordance with ASTM-D-3951 ITEM NAME – Sleeve, Aft Propulsion Shaft

VESSEL USAGE – 160WLIC

LENGTH: 31.000”

OUTSIDE DIAMETER: 6.160”

INSIDE DIAMETER: 4.890”

STOCK NUMBER 2010-01-035-2178

ITEM NAME Sleeve, Aft Prop Shaft PART NUMBER 160WLIC-4301-1-Piece 7 CONTRACT NUMBER See Contract Page 1 DELIVERY ORDER NUMBER See Contract SHIPPING WEIGHT As Determined by Contractor

CONDITION CODE CONDITION A

DS 015 210 A CLASS AFT TAIL SHAFT

Finish in accordance with SAE-J-448 Material in accordance with ASTM-B-369 PP&M in accordance with ASTM-D-3951 ITEM NAME – Sleeve, Aft, Aft Propulsion Shaft VESSEL USAGE – 210A Class

LENGTH: 52.500”

OUTSIDE DIAMETER: 12.475”

INSIDE DIAMETER: 10.760”

STOCK NUMBER 2010-01-154-9899

ITEM NAME Sleeve, Aft Prop Shaft PART NUMBER 618WMEC4301-3-Piece 15 CONTRACT NUMBER See Contract Page 1 DELIVERY ORDER NUMBER See Contract SHIPPING WEIGHT As Determined by Contractor

CONDITION CODE CONDITION A

DS 016 210 A CLASS INTER TAIL PROP SHAFT

Finish in accordance with SAE-J-448 Material in accordance with ASTM-B-369 PP&M in accordance with ASTM-D-3951 ITEM NAME – Sleeve, Intermediate Propulsion Shaft

LENGTH: 55.000”

OUTSIDE DIAMETER: 12.100”

INSIDE DIAMETER: 10.699”

STOCK NUMBER 2010-01-154-9900

ITEM NAME Sleeve Int. Prop Shaft PART NUMBER 618WMEC4301-3-Piece 14 CONTRACT NUMBER See Contract Page 1 DELIVERY ORDER NUMBER See Contract SHIPPING WEIGHT As Determined by Contractor

CONDITION CODE CONDITION A

DS 017 210A CLASS FWD, AFT TAIL PROP SHAFT

Finish in accordance with SAE-J-448 Material in accordance with ASTM-B-369 PP&M in accordance with ASTM-D-3951 ITEM NAME – Sleeve, Fwd, Aft Propulsion Shaft

LENGTH: 6.750”

OUTSIDE DIAMETER: 11.975”

INSIDE DIAMETER: 10.400”

STOCK NUMBER 2010-01-313-8079

ITEM NAME Sleeve, Fwd, Aft Prop Shaft PART NUMBER 618WMEC4301-3-Piece 13 CONTRACT NUMBER See Contract Page 1 DELIVERY ORDER NUMBER See Contract SHIPPING WEIGHT As Determined by Contractor

CONDITION CODE CONDITION A

DS 018 160’ FWD PROPULSION SHAFT

Finish in accordance with SAE-J-448 Material in accordance with ASTM-B-369 PP&M in accordance with ASTM-D-3951 ITEM NAME – Sleeve, Fwd Propulsion Shaft

VESSEL USAGE – 160 WLIC

LENGTH: 37.000”

OUTSIDE DIAMETER: 6.160”

INSIDE DIAMETER: 4.896”

STOCK NUMBER 2010-01-035-7328

ITEM NAME Sleeve, Fwd Prop Shaft PART NUMBER 160WLIC-4301-1-Piece 6 CONTRACT NUMBER See Contract Page 1 DELIVERY ORDER NUMBER See Contract SHIPPING WEIGHT As Determined by Contractor

CONDITION CODE CONDITION A

DS 020 378, (715-726) FWD TAIL & AFT STERN TUBE PROPULSION SHAFT

Finish in accordance with SAE-J-448 Material in accordance with ASTM-B-369 PP&M in accordance with ASTM-D-3951 ITEM NAME – Sleeve, Fwd Tail & Aft Stern Tube Propulsion Shafts

VESSEL USAGE – 378 WHEC (715-726)

LENGTH: 50.000”

OUTSIDE DIAMETER: 20.3.75”

INSIDE DIAMETER: 18.125”

STOCK NUMBER 2010-01-141-3515

ITEM NAME Sleeve, Fwd Tail & Aft Stern Tube

PART NUMBER 724WHEC4301-5-PIECE-M72-2, M72-3

CONTRACT NUMBER See Contract Page 1 DELIVERY ORDER NUMBER See Contract SHIPPING WEIGHT As Determined by Contractor

CONDITION CODE CONDITION A

DS 021 378’ (715-726) FWD STERN TUBE PROPULSION SHAFT

Finish in accordance with SAE-J-448 Material in accordance with ASTM-B-369 PP&M in accordance with ASTM-D-3951 ITEM NAME – Sleeve, Fwd Stern Tube Propulsion Shaft

LENGTH: 32.000”

OUTSIDE DIAMETER: 20.225”

INSIDE DIAMETER: 18.025”

STOCK NUMBER 2010-01-141-3516

ITEM NAME Sleeve, Fwd Stern Tube PART NUMBER 724WHEC4301-5-Piece-M72-1 CONTRACT NUMBER See Contract Page 1 DELIVERY ORDER NUMBER See Contract SHIPPING WEIGHT As Determined by Contractor

CONDITION CODE CONDITION A

DS 022 378’ (715-726) AFT TAIL PROPULSION SHAFT

Finish in accordance with SAE-J-448 Material in accordance with ASTM-B-369 PP&M in accordance with ASTM-D-3951 ITEM NAME – Sleeve, Aft Tail Propulsion Shaft

LENGTH: 77.250”

OUTSIDE DIAMETER: 23.250”

INSIDE DIAMETER: 20.900”

STOCK NUMBER 2010-01-141-3517

ITEM NAME Sleeve, Aft Tail Prop Shaft PART NUMBER 724WHEC4301-5-Piece-M72-4 CONTRACT NUMBER See Contract Page 1 DELIVERY ORDER NUMBER See Contract SHIPPING WEIGHT As Determined by Contractor

CONDITION CODE CONDITION A

DS 026 270’ TAIL PROPULSION SHAFT

Finish in accordance with SAE-J-448 Material in accordance with ASTM-B-369 PP&M in accordance with ASTM-D-3951 ITEM NAME – Sleeve, Tail Propulsion Shaft VESSEL USAGE – 270 WMEC A&B Classes

LENGTH: 76.500”

OUTSIDE DIAMETER: 12.350”

INSIDE DIAMETER: 10.525”

STOCK NUMBER 2010-01-345-2314

ITEM NAME Sleeve, Tail Propulsion Shaft PART NUMBER 901WMEC-243-004-Piece 3 CONTRACT NUMBER See Contract Page 1 DELIVERY ORDER NUMBER See Contract SHIPPING WEIGHT As Determined by Contractor

CONDITION CODE CONDITION A

DS 027 270’ TAIL PROPULSION SHAFT

Finish in accordance with SAE-J-448 Material in accordance with ASTM-B-369 PP&M in accordance with ASTM-D-3951

VESSEL USAGE – 270 WMEC A&B Class

LENGTH: 63.750”

INSIDE DIAMETER: 10.450”

STOCK NUMBER 2010-01-345-2315

ITEM NAME Sleeve, Propulsion Shaft PART NUMBER 901WMEC-243-004-Piece 4 CONTRACT NUMBER See Contract Page 1 DELIVERY ORDER NUMBER See Contract SHIPPING WEIGHT As Determined by Contractor

CONDITION CODE CONDITION A

DS 028 270’ TAIL PROPULSION SHAFT

Finish in accordance with SAE-J-448 Material in accordance with ASTM-B-369 PP&M in accordance with ASTM-D-3951

VESSEL USAGE – 270WMEC A&B Class

LENGTH: 73.250”

INSIDE DIAMETER: 10.600”

STOCK NUMBER 2010-01-340-5362

ITEM NAME Sleeve, Propulsion Shaft PART NUMBER 901WMEC-243-004-Piece 2 CONTRACT NUMBER See Contract Page 1 DELIVERY ORDER NUMBER See Contract SHIPPING WEIGHT As Determined by Contractor

CONDITION CODE CONDITION A

DS 029 270’ TAIL PROPULSION SHAFT

Finish in accordance with SAE-J-448 Material in accordance with ASTM-B-369 PP&M in accordance with ASTM-D-3951

VESSEL USAGE – 270’ A&B Class

LENGTH: 49.000”

INSIDE DIAMETER: 10.375”

STOCK NUMBER 2010-01-340-6083

ITEM NAME Sleeve, Propulsion Shaft PART NUMBER 901WMEC-243-004-Piece 5 CONTRACT NUMBER See Contract Page 1 DELIVERY ORDER NUMBER See Contract SHIPPING WEIGHT As Determined by Contractor

CONDITION CODE CONDITION A

DS 030 75’ PROPULSION SHAFT

Finish in accordance with SAE-J-448 Material in accordance with ASTM-B-369 PP&M in accordance with ASTM-D-3951 ITEM NAME – Sleeve, Propulsion Shaft VESSEL USAGE – 75’ Class

LENGTH: 20.500”

OUTSIDE DIAMETER: 5.225”

INSIDE DIAMETER: 4.143”

STOCK NUMBER 2010-01-341-5196

ITEM NAME Sleeve, Propulsion Shaft PART NUMBER 75BWAGL-4301-1Piece 2 CONTRACT NUMBER See Contract Page 1 DELIVERY ORDER NUMBER See Contract SHIPPING WEIGHT As Determined by Contractor

CONDITION CODE CONDITION A

DS 031 75’ B CLASS SLEEVE, PROPULSION SHAFT

Finish in accordance with SAE-J-448 Material in accordance with ASTM-B-369 PP&M in accordance with ASTM-D-3951

VESSEL USAGE – 75’Class

LENGTH: 20.500”

OUTSIDE DIAMETER: 4.975”

INSIDE DIAMETER: 4.143”

STOCK NUMBER 2010-01-342-1947

ITEM NAME Sleeve, Propulsion Shaft PART NUMBER 75B-WAGL-4301-1Piece 16, 33 CONTRACT NUMBER See Contract Page 1 DELIVERY ORDER NUMBER See Contract SHIPPING WEIGHT As Determined by Contractor

CONDITION CODE CONDITION A

DS 032 270’ CLASS SLEEVE RUDDER STOCK

Finish in accordance with SAE-J-448 Material in accordance with ASTM-B-369 PP&M in accordance with ASTM-D-3951 ITEM NAME – Sleeve, Rudder Stock

VESSEL USAGE – 270WMEC A&B

LENGTH: 32.000”

OUTSIDE DIAMETER: 17.750”

INSIDE DIAMETER: 14.375”

STOCK NUMBER 2040-01-F91-0187

ITEM NAME Sleeve, Rudder Stock

PART NUMBER 8504

CONTRACT NUMBER See Contract Page 1 DELIVERY ORDER NUMBER See Contract SHIPPING WEIGHT As Determined by Contractor

CONDITION CODE CONDITION A

DS 033 378’ (716 thru 726) SLEEVE, RUDDER STOCK

Finish in accordance with SAE-J-448 Material in accordance with ASTM-B-369 PP&M in accordance with ASTM-D-3951 ITEM NAME – Sleeve, Rudder Stock

VESSEL USAGE – 378WHEC

LENGTH: 64.500”

OUTSIDE DIAMETER: 22.700”

INSIDE DIAMETER: 20.300”

STOCK NUMBER 3120-01-157-7051

ITEM NAME Sleeve, Rudder Stock

PART NUMBER 378FRAM-W-562-001PC7

CONTRACT NUMBER See Contract Page 1 DELIVERY ORDER NUMBER See Contract SHIPPING WEIGHT As Determined by Contractor

CONDITION CODE CONDITION A

DS 034 210’ A CLASS SLEEVE PROP LINE SHAFT

Finish in accordance with SAE-J-448 Material in accordance with ASTM-B-369 PP&M in accordance with ASTM-D-3951 ITEM NAME – Sleeve, Prop Line Shaft VESSEL USAGE – 210WMEC A Class

LENGTH: 34.000”

OUTSIDE DIAMETER: 11.600”

INSIDE DIAMETER: 10.650”

STOCK NUMBER 2010-01-350-5034

ITEM NAME Sleeve, Prop Line Shaft

PART NUMBER 618WMEC4301-4-PIECE 23

CONTRACT NUMBER See Contract Page 1 DELIVERY ORDER NUMBER See Contract SHIPPING WEIGHT As Determined by Contractor

CONDITION CODE CONDITION A

DS 035 210’A CLASS SLEEVE PROP LINE SHAFT

Finish in accordance with SAE-J-448 Material in accordance with ASTM-B-369 PP&M in accordance with ASTM-D-3951 ITEM NAME – Sleeve, Prop. Line Shaft VESSEL USAGE – 210WMEC A Class

LENGTH: 26.000”

OUTSIDE DIAMETER: 11.600”

INSIDE DIAMETER: 10.650”

STOCK NUMBER 2010-01-350-8399

ITEM NAME Sleeve, Prop Line Shaft

PART NUMBER 618WMEC4301-4-PIECE 24

CONTRACT NUMBER See Contract Page 1 DELIVERY ORDER NUMBER See Contract SHIPPING WEIGHT As Determined by Contractor

CONDITION CODE CONDITION A

DS 036 225’ SLEEVE PROPULSION SHAFT

Finish in accordance with SAE-J-448 Material in accordance with ASTM-B-369 PP&M in accordance with ASTM-D-3951

VESSEL USAGE – 225 WLB

LENGTH: 124.000”

OUTSIDE DIAMETER: 18.250”

INSIDE DIAMETER: 15.750”

STOCK NUMBER 2010-01-445-3407

ITEM NAME Sleeve, Prop Shaft

PART NUMBER 110253017-2

CONTRACT NUMBER See Contract Page 1 DELIVERY ORDER NUMBER See Contract SHIPPING WEIGHT As Determined by Contractor

CONDITION CODE CONDITION A

DS 037 Tail Shaft Sleeves AFT & FWD

Finish in accordance with SAE-J-448 Material in accordance with ASTM-B-369 PP&M in accordance with ASTM-D-3951

VESSEL USAGE – 75E & 75C

LENGTH: 34.000”

OUTSIDE DIAMETER: 5.650”

INSIDE DIAMETER: 4.300”

STOCK NUMBER 2010-01-501-5970

ITEM NAME Sleeve, Shaft Aft & Fwd

PART NUMBER 75E-WLR4301 PC 7 & 15

CONTRACT NUMBER See Contract Page 1 DELIVERY ORDER NUMBER See Contract SHIPPING WEIGHT As Determined by Contractor

CONDITION CODE CONDITION A

DS 038 Tail Shaft Sleeves AFT & FWD

Finish in accordance with SAE-J-448 Material in accordance with ASTM-B-369 PP&M in accordance with ASTM-D-3951

VESSEL USAGE – 75F

LENGTH: 60.000”

OUTSIDE DIAMETER: 5.900”

INSIDE DIAMETER: 4.800”

STOCK NUMBER 2010-01-501-5183

ITEM NAME Sleeve, Shaft Aft & Fwd

PART NUMBER 75F-WLR SLEEVES AFT & FWD

CONTRACT NUMBER See Contract Page 1 DELIVERY ORDER NUMBER See Contract SHIPPING WEIGHT As Determined by Contractor

CONDITION CODE CONDITION A

DS 039 Tail Shaft Sleeves AFT, MID

Finish in accordance with SAE-J-448 Material in accordance with ASTM-B-369 PP&M in accordance with ASTM-D-3951

VESSEL USAGE – 65WD & 65B WD

LENGTH: 38.000”

OUTSIDE DIAMETER: 4.900”

INSIDE DIAMETER: 4.100”

STOCK NUMBER 2010-01-501-4448

ITEM NAME Sleeve, Shaft Aft & Mid

PART NUMBER 65WD4302SLEEVES AFT & MID

CONTRACT NUMBER See Contract Page 1 DELIVERY ORDER NUMBER See Contract SHIPPING WEIGHT As Determined by Contractor

CONDITION CODE CONDITION A

DS 040 Tail Shaft Sleeves FWD

Finish in accordance with SAE-J-448 Material in accordance with ASTM-B-369 PP&M in accordance with ASTM-D-3951

VESSEL USAGE – 65WB

LENGTH: 14.000”

OUTSIDE DIAMETER: 4.900”

INSIDE DIAMETER: 3.600”

STOCK NUMBER 2010-01-501-4450

ITEM NAME Sleeve, Shaft Fwd

PART NUMBER 65WD4302SLEEVE FWD

CONTRACT NUMBER See Contract Page 1 DELIVERY ORDER NUMBER See Contract SHIPPING WEIGHT As Determined by Contractor

CONDITION CODE CONDITION A

DELIVERABLE LIST

CLIN DESCRIPTION QUAN PRICE EACH PRICE TOTAL

0001 For approval, test, inspection, chemical analysis and ladle capacity report in accordance with sections 3.3 and 3.5 of specification P-243-0085 as required for any sleeve ordered in CLIN’s 0002 thru 0030.

1 EA

0002 2010-01-094-8938

Sleeve in accordance with specification P- 243-0085 for the sleeve on Data Sheet 001, titled 210’B Class AFT Line Shaft.

0003 2010-01-222-9322

243-0085 for the sleeve on Data Sheet 002, titled 210’B Class AFT Tail Shaft

0004 2010-01-187-1763

243-0085 for the sleeve on Data Sheet 003, titled 210’B Class FWD Line Shaft

0005 2010-01-222-9353

243-0085 for the sleeve on Data Sheet 004, titled 210’B Class FWD Tail Shaft

0006 3120-01-192-5796

243-0085 for the sleeve on Data Sheet 005, titled 140’ AFT Propulsion Shaft

0007 3120-01-191-6376

243-0085 for the sleeve on Data Sheet 006, titled 140’ FWD Propulsion Shaft

0008 2010-01-035-2178

243-0085 for the sleeve on Data Sheet 009, titled 160’ AFT Propulsion Shaft

0009 2010-01-154-9899 Sleeve in accordance with specification P- 243-0085 for the sleeve on Data Sheet 015, titled 210’ A Class AFT sleeve, Aft Tail Propulsion Shaft

0010 2010-01-154-9900

243-0085 for the sleeve on Data Sheet 016, titled 210’ A Class Intermediate sleeve, Tail

0011 2010-01-313-8079

243-0085 for the sleeve on Data Sheet 017, titled 210’ A Class FWD Sleeve, AFT, 3 EA

0012 2010-01-035-7328

243-0085 for the sleeve on Data Sheet 018, titled 160’ FWD Propulsion Shaft

0013 2010-01-141-3515

243-0085 for the sleeve on Data Sheet 020, titled 378’ (719-726) FWD Tail & AFT Stern tube Propulsion Shaft

0014 2010-01-141-3516

243-0085 for the sleeve on Data Sheet 021, titled 378’ (719-726) FWD Stern Tube

0015 2010-01-141-3517

243-0085 for the sleeve on Data Sheet 022, titled 378’ (719-726) AFT Tail sleeve, 0016 2010-01-345-2314

243-0085 for the sleeve on Data Sheet 026, titled 270’ A&B Class Tail Propulsion

Shaft. 2 EA $_________ $________

0017 2010-01-345-2315

Sleeve in accordance with specification P- 243-0085 for the sleeve on Data Sheet 027, titled 270’ A&B Class Tail Propulsion Shaft

2 EA

0018 2010-01-340-5362

243-0085 for the sleeve on Data Sheet 028, 0019 2010-01-340-6083

243-0085 for the sleeve on Data Sheet 029, 0020 2010-01-341-5196

243-0085 for the sleeve on Data Sheet 030, titled 75’ Propulsion Shaft

0021 2010-01-342-1947

243-0085 for the sleeve on Data Sheet 031, titled 75’ B Class sleeve, Propulsion Shaft

0022 2040-01-F91-0187

243-0085 for the sleeve on Data Sheet 032, titled 270’ A&B Class Rudder Stock.

0023 3120-01-157-7051

243-0085 for the sleeve on Data Sheet 033, titled 378’ (716-726) sleeve, Rudder Stock

0024 2010-01-350-5034

243-0085 for the sleeve on Data Sheet 034, titled 210’ A Class sleeve, Line Propulsion Shaft

0025 2010-01-350-8399

243-0085 for the sleeve on Data Sheet 035, titled 210’ A Class sleeve, Line Propulsion Shaft

0026 2010-01-445-3407

243-0085 for the sleeve on Data Sheet 036, titled 225’ sleeve, Propulsion Shaft

0027 2010-01-501-5970

243-0085 for the sleeve on Data Sheet 037, titled 75’E Sleeve, Propulsion Shaft Aft & Fwd.

0028 2010-01-501-5183

243-0085 for the sleeve on Data Sheet 038, titled 75’F sleeve, Propulsion Shaft Aft & Fwd.

0029 2010-01-501-4448

243-0085 for the sleeve on Data Sheet 039, titled 65WD’ sleeve, Propulsion Shaft Aft & Mid.

0030 2010-01-501-4450

243-0085 for the sleeve on Data Sheet 040, titled 65’WD sleeve, Propulsion Shaft Fwd.

DELIVERY SCHEDULE

CLIN QUAN UNIT OF ISSUE WITHIN

0001 1 EA 45 calendar days after the receipt of a delivery order.

REVIEW 15 days for Coast Guard Review.

0002 1 EA 30 calendar days after final approval of CLIN

0001.

0003 1 EA 30 calendar days after final approval of CLIN

0001.

0004 1 EA 30 calendar days after final approval of CLIN

0001.

0005 1 EA 30 calendar days after final approval of CLIN

0001.

0006 1 EA 30 calendar days after final approval of CLIN

0001.

0007 1 EA 30 calendar days after final approval of CLIN

0001.

0008 1 EA 30 calendar days after final approval of CLIN

0001.

0009 1 EA 30 calendar days after final approval of CLIN

0001.

0010 1 EA 30 calendar days after final approval of CLIN

0001.

0011 3 EA 30 calendar days after final approval of CLIN

0001.

0012 1 EA 30 calendar days after final approval of CLIN

0001.

0013 12 EA 30 calendar days after final approval of CLIN

0001.

0014 1 EA 30 calendar days after final approval of CLIN

0001.

0015 1 EA 30 calendar days after final approval of CLIN

0016 1 EA 30 calendar days after final approval of CLIN

0017 2 EA 30 calendar days after final approval of CLIN

0001.

0018 2 EA 30 calendar days after final approval of CLIN

0001.

0019 2 EA 30 calendar days after final approval of CLIN

0001.

0020 2 EA 30 calendar days after final approval of CLIN

0001.

0021 1 EA 30 calendar days after final approval of CLIN

0001.

0022 2 EA 30 calendar days after final approval of CLIN

0001.

0023 2 EA 30 calendar days after final approval of CLIN

0001.

0024 1 EA 30 calendar days after final approval of CLIN

0001.

0025 1 EA 30 calendar days after final approval of CLIN

0001.

0026 1 EA 30 calendar days after final approval of CLIN

0001.

0027 1 EA 30 calendar days after final approval of CLIN

0001.

0028 EA 30 calendar days after final approval of CLIN

0001.

0029 EA 30 calendar days after final approval of CLIN

0030 EA 30 calendar days after final approval of CLIN

THIS CHANGE SHALL MAKE P-243-0085 REV I, 08/02

CHANGE 1 09/04 TO CHANGE 2 11/04

1.2 ADD New Data Sheets.

037 75E & 75C Tail Shaft Sleeves AFT & FWD 038 75F Tail Shaft Sleeves AFT & FWD 039 65WD& 65B Shaft Sleeves Aft, MID, & FWD on B 040 65WD Shaft Sleeve FWD

DATA

SHEETS

ADD Added Data Sheets 037 thru 040.

Data sheet DS 037 Change Sleeve length from 23.00” to 30.00” CHANGE 1

DS 022 Change Sleeve outside diameter from 23.100” to 23.250” CHANGE 2

THIS CHANGE SHALL MAKE P-243-0085 REV I, 08/02

CHANGE 2 TO CHANGE 3 07/05

Data sheet DS 036 Change Sleeve I.D. from 16.100” to 15.750” O.D. from 18.150” to 18.250” CHANGE 3

THESE CHANGES SHALL MAKE P-243-0085 REV J, 06/07

Data sheet DS 017

DS 009

DS 018

DS 019

DS 034

DS 035

Change

Remove Change Change

Sleeve length from 5.250 to 7.250 due to drawing change lengthening fiberglass wrap area.

Added .250 length to sleeve Added .250 length to sleeve All 65 WYT cutters have been converted to Aqua net shafts, no sleeves.

Added .500 length to sleeve Added .500 length to sleeve

Specification 1.2

2.1 2.2 2.2.1 2.5 3.2.a.1 3.2.a.2 6.1.2.a 6.1.2.b 6.1.2.c 6.1.2.d

Change Change Change Change Change Change Change Change Change Change Change

Deleted info for DS 019 due to shafts being changed to Aqua net, no sleeves.

Added General Statement.

Added Government Documents Added general statement Moved Document Availability from 2.1 to 2.5 Changed tolerance from +0.025 - 0.025 to +0.025 – 0.000 Changed tolerance from +0.010 - 0.010 to +0.000 – 0.010 Updated address and phone numbers Updated address and phone numbers Updated address and phone numbers Updated address and phone numbers

Deliverables CLIN 0013

CLIN 0014-

Removed CLIN due to shaft sleeves no longer needed due to 65WYT going to Aqua net shafts, no sleeves.

Renumbered CLIN’s due to removal of CLIN 0013

Delivery Schedule

CLIN 0031

Removed CLIN due to removal of CLIN 0013 due to 65WYT no longer needing sleeves.

THESE CHANGES SHALL MAKE P-243-0085, REV J 06/07 TO REV J, CHANGE 1

4/10

Specification Cover Sheet

Specification

Added “1” to Change Section, Changed Name in UPDATED Block.

All references to Engineering Logistics Center (ELC) change to Surface Forces Logistics Center (SFLC)

Data sheet All Data

Sheets

DS 020, 021

and 022

DS 020

DS 021

DS 022

DS 032

DS 036

Change

Changed: Header Format of All Data Sheets

Changed: Vessel Usage Data from (719-726) to (715-726)

Changed: Length of 53.000” to 50.000”, O.D. of 20.600” to 20.375”, I.D. of 18.137” to 18.125” Changed: Length of 32.500” to 32.000”.

Changed: Length of 79.250” to 77.250”.

Changed: O.D. of 17.800” to 17.750”; I.D. of 14.300” to 14.375”.

Changed: Length of 122.000” to 124.000”

ACQUISITION PLAN

FAR 7.104 - 7.105

FOR: Requirements Contract For Cu/Ni Shaft Sleeves Used on Various CG Cutters

P.R. * ____________________________________________

Acquisition Planners:

Wayne B. Nickel 410-762-6720, Branch 026

As many as needed

I. ACQUISITION BACKGROUND & OBJECTIVES

A. TECHNICAL HISTORY OF THE ACQUISITION –

The 29 shaft sleeves involved in this procurement action are made of a copper nickel alloy UNS No.

C96400. The sleeves are purchased oversized and rough finished for final finishing during installation on the various propulsion shafts.

B. PROCUREMENT HISTORY OF THE ACQUISITION –

The 29 shaft sleeves involved in this procurement action have been purchased via a requirements contract for the past ten years. They have been used as GFM on several shaft repair & manufacturing contracts covering the same period.

C. ACQUISITION ALTERNATIVES –

None

1) Applicable Conditions -

None

2) Cost -.

See attached Government cost estimate

3) Capacity of Performance - The Coast Guard does not have the facilities available to manufacturer/repair the items listed herein.

4) Delivery or Performance Period Requirements –

5) Trade-offs - N/A

6) Risks - N/A

7) Acquisition Streamlining - N/A

II PLAN OF ACTION

1) Sources -

Techni-Cast Corporation Saint-Gobain Vetrotex America, Inc.

11220 S. Garfield Ave. 750 E. Swedesford Rd South Gate Ca. 90280 Valley Forge, PA 19482-0101 1-800-923-4585 610-341-7670 Fax: 562-861-4259 Fax: 610-341-7470 sales@techni-cast.com Ruth.h.elton@saint-gobain.com

Efunda Inc Johnson Brass and machine Foundry, Inc.

P.O. Box 6440 270 N. Mill Street, P.O. Box 219 Sunnyvale, CA 94088 Saukville, WI 53080 1-800-398-5968 262-377-9440 Fax: 1-408-904-5190 Fax: 262-284-7066 sales@efunda.com Brian.soltes@johnsoncentrifugal.com

Miller Centrifugal Casting Co. Centrifugal Castings Inc.

P.O. Box 456 3320 Parkway Dr. P.O. Box 210 Cecil, PA 15321-0456 Tempe, TX 76504 724-745-0300 1-800-999-9068 Fax: 724-745-0418 Fax: 254-773-1133 contact@millercentrifugal.com csheard@centrifugal.net

Deeco Metals 10-16 Renee Place Irvington, NJ 07111 1-800-272-7784 Fax: 1-800-220-6180 Info@deeco.net

2) Competition - Full and open competition is anticipated.

3) Source Selection Procedure - N/A

4) Contracting Considerations - N/A

5) Budgeting and Funding – Via delivery orders funded individually.

6) Product Descriptions - See specification P-243-0085 and its referenced documents.

7) Priorities, allocations, and allotments - N/A.

8) Contractor versus Government performance - N/A

9) Management information requirements - N/A

10) Make or buy - N/A mailto:Ruth.h.elton@saint-gobain.com mailto:Brian.soltes@johnsoncentrifugal.com mailto:contact@millercentrifugal.com mailto:csheard@centrifugal.net

11) Test and evaluation - Contractor is required to perform the necessary testing as required by the specification.

12) Logistics consideration - N/A

13) Government Furnished Property - N/A

14) Government Furnished Information - N/A

15) Environmental Considerations - N/A

16) Security considerations - N/A

17) Other considerations - N/A

18) Milestones for the acquisition cycle - See Attached

19) Planning for the purchase of Supplies in Economic Quantities - N/A

CHECK APPLICABLE BLOCK

[ X ] This requirement will be based on full & open competition.

[ ] The requirement has been coordinated with the Yard Competition Advocate.

[ ] Attached hereto is the draft Justification for Other Than Full and open competition.

This acquisition plan has been developed by the acquisition planners listed above and is recommended for approval.

W. B. Nickel .

Signature

Signature

Contract Specialists .

Signature Date This plan has been reviewed and discussed with the planners and is approved.

Contracting Officer Signature Date

Signature Date