J A_Redacted.pdf

srMpLrFtED ACQUtStTION PROCEDURES (SAp)

JUSTIFICATION FOR OTHER THAN FULL AND OPEN COMPETITION

SOLICITATIONS MAY BE LIMITED TO ONE SOURCE ONLY IF THE CONTMCTING OFFICER DETERMINES THAT ONLY ONE SOURCE IS REASONABLY AVAILABLE. THIS DETERMINATION MUST BE SUPPORTED WITH FULL JUSTIFICATION FOR SOLE SOURCE FROM THE CUSTOMER. WHEN THE CUSTOMER DESCRIBES AN ITEM WITH A PURCHASE DESCRIPTION, WHICH LIMITS THE AVAILABILIry TO ONE SOURCE, THE JUSTIFICATION MUST EXPLAIN WHY THE ITEM IS THE ONLY ONE THAT WILL MEET THE GOVERNMENT'S REQUIREMENT. STATEMENTS SUCH AS "ONLY KNOWN SOURCE'OR'ONLY SOURCE WHICH CAN MEET THE REQUIRED DELIVERY DATE" ARE INADEQUATE TO SUPPORT A SOLE SOURCE PURCHASE. THE CUSTOMER SHALL

PROVIDE THE FOLLOWING INFORMATION:

1. PURCHASE REQUEST OR REQUISITION

NUMBER

3. ESTIMATED AMOUNT (OVER $2,500 BUT NOT

EXCEEDTNG $100,000)

4. BRIEF DESCRIPTION OF SUPPLIES OR SERVICES REQUIRED AND THE INTENDED USE.

This requirement is for the procurement of the following item for use on the MH60T aircraft. This component is required to be replaced during the PDM induction of the aircraft due to corrosion or Unit Mount P/N 6075-4201-110.

5. UNIQUE CHARACTERISTICS THAT LIMIT AVAILABILITY TO ONLY ONE SOURCE, WTH THE REASON NO OTHER SUPPLIES OR

SERVICES CAN BE USED.

Contract Fabrication & Design (CFD) is the original equipment manufacturer (OEM) of the Display Unit Mount Assembly and only CFD has the specifications to modify this component and holds proprietary rights to the data ensuring product integrity for our aircraft specific applications. There were no other sources identified during market research using FedLog, WEBFlis, DOD E-mall, GSA Advantage and lLSmart. Also, additional internet search engine queries did not lead to any known distributors of this material or alternate part numbers associated to be used as a substitute for the intended application.

6. REASON THAT SUGGESTED SOURCE IS THE ONLY SOURCE WHICH CAN PROVIDE THE SUPPLIES OR SERVICES

10 U.S.C. 230a(c)(1 ); FAR 6.302. 1 only one responsible source and no other supplies or services will satisty agency requirements. CFD is the OEM and only known responsible source and no other supplies or services will satisfy agency requirements at this time.

7. EXPLAIN WHY AN ADEQUATE PURCHASE DESCRIPTION OR OTHER INFORMATION SUITABLE TO SOLICIT BY FULL AND OPEN

COMPETITION HAS NOT BEEN DEVELOPED OR ARE NOT AVAILABLE.

Technical date packages, specifications and documentation necessary to enable full and open competition have not been

8. PROVIDE A STATEMENT OF ACTIONS, IF ANY, THE GOVERNMENT MAY TAKE TO REMOVE OR OVERCOME ANY BARRIERS TO COMPETITION BEFORE FUTURE ACQUISITIONS ARE REQUIRED. IF THIS IS A FOLLOW.ON ACTION TO A PREVIOUSLY

COMPETED ACTION, SO STATE.

The USCG does not have the required data or drawings to overcome the limited supplier or sole source barrier to competition due to proprietary data belonging to commercial manufacturers. lt would not be cost effective to acquire the data to compete and overcome the sole source banier. However, the USCG closely monitors the procurement of this material should it become available or cost effective, the USCG would procure the data or drawings to compete for open competition.

CERTIFICA-I'ION, AND SIGNATURE

98. TELEPHONE