SOW_DTTrailers_23FEB16.docx

STATEMENT OF WORK

February 23, 2016

USCG MSST (91109)- TDT

Customized Mobile TOC Trailers

U.S. COAST GUARD

Maritime Safety and Security Team 91109 1022 Bay Marina Dr Suite 125 National City, Ca 91950

1.0 Requirements:

This solicitation is set aside for Small Business.

2.0 Scope of Work:

2 New “Customized Tactical Delivery Team (TDT) Response Unit Trailers” shall be fabricated to meet the needs of all deployable TDT members assigned to MSST San Diego 91109. The customized trailers will work to facilitate and accommodate the mobilization of TDT members and set-up of equipment transported during off-site training opportunities. Additionally, trailers will meet the various mission capability requirements of TDT to establish a mobile TOC in remote locations. The following is a summary of all necessary capabilities and characteristics of the proposed Customized TDT Response Unit Trailers:

a. General Characteristics:

· Product: 2016

· Width: 8.5 ft

· Length: 20 ft

· Height: 7.0 ft

· Warranty: 5 YR STR, 3 YR LTD, 1 YR ELEC WARRANTY

· Axles: (2) 5200# Torsion

· Color: White – or Customer Choice

· Cabinet Color: Customer Choice upon contract award

b. Frame Requirements:

· FULL PERIMETER ALUMINUM FRAME

· ALL TUBE CONSTRUCTION

· FLOOR DESIGN : FLAT

· 16" O/C WALL SUPPORTS

· 16" O/C ROOF CROSSMEMBERS : 1" x 3"

· 5000# ZINC TOP WIND JACK

· FRONT DESIGN : FLAT

· 7-WAY PLUG

· COUPLER : 2-5/16"

· 16" O/C FLOOR CROSSMEMBERS

· SPREAD AXLE DESIGN WITH FENDERETTES

· (2) AXLES, 5200# TORSION, EZ LUBE, W/ BRAKES,

· SMOOTH ALUMINUM WHEEL BOXES

· ST225/75R15/LRD RADIAL TIRE ON GREY MOD WHEEL

c. Interior Requirements:

· FLOORING: ADVANTECH 3/4"

· (2) SURFACE MOUNT DOME LIGHTS WITH WALL SWITCH (LED)

· 3/8” PLYWOOD WALLS

· OPEN STUD CEILING

d. Exterior Requirements:

· (1) ROOF VENT

· 3" LOWER RUB RAIL TRIM

· 3" UPPER RUB RAIL TRIM

· .030 ALUMINUM

· ONE PIECE ALUMINUM ROOF

· DOUBLE REAR CARGO DOORS

· 24" ATP STONEGUARD WITH J-RAIL

· LED CLEARANCE & BRAKE LIGHTS

· COLOR MATCHED FRONT CORNERS

· SCREWLESS EXTERIOR

· 32” DOOR- 405 SERIES ENTRY- FLUSH LOCK LATCH

e. Summary of Required Options:

-20 ft 6" ADDITIONAL HEIGHT / FT

- *** REAR DOOR OPENING DOES NOT EXCEED 7' HEIGHT UNLESS OPTIONED SEPARATELY

- *** ENTRANCE DOOR WILL NOT EXCEED 78"

-4 UPGRADE TO ST225/75R15/LRD ON ALUMINUM WHEEL W/SS LUGNUTS

- (1) PREMIUM REAR RAMP DOOR - ATP FLOOR - 4000# RATED (8.5' WIDE)

- CONTINUOUS HINGE

- INCLUDES ATP TRANSITION FLAP

- ALUMINUM BAR LOCKS AND SS HASPS

- (1) POLISHED CAST ALUMINUM CORNERS WITH STAINLESS STEEL FRONT VERTICALS & TOP RADIUS

- *** REQUIRES OPTION TO UPGRADE TO 4" UPPER AND 7" LOWER TRIM - MUST BE SELECTED SEPARATELY ***

- 20 ft UPGRADE TO 7" LOWER TRIM AND 4" UPPER TRIM / FT

- (1) 17' MANUAL AWNING WITH ALUMINUM WEATHERSHIELD

- (1) 18" RECTANGULAR L.E.D. LIGHT - 12V (RECESSED WITH TRIM RING)

- INCLUDES RECESSED TRIM RING

- 2 UPGRADE STANDARD 12V L.E.D. DOME LIGHT TO 18" RECTANGULAR L.E.D. LIGHT - 12V (RECESSED)

- (1) BATTERY - 12V AGM (930 CA, 775 CCA)

- Includes Fuse Panel - No Battery Box

- (1) WALL SWITCH - 12V

- (1) 120V PACKAGE #2

- 50 AMP BREAKER BOX

- EXTERIOR POWER INLET (MOTORBASE) WITH 25' SHORE CORD

- (4) 120V INTERIOR RECEPTS

- (4) 120V 48" FLUORESCENT LIGHTS WITH WALL SWITCH

- RECESSED IF POSSIBLE

- (2) 12V SURFACE MOUNT EXTERIOR HIGH-OUTPUT LED SCENE LIGHTS WITH WALL

SWITCH (7"x3")

- FRAME & WIRE FOR A/C

- 4 UPGRADE LIGHT FROM 120V 48" FLUORESCENT TO 12V 18" RECESSED L.E.D./ EA

- *** BATTERY AND CONVERTER NOT INCLUDED***

- 2 UPGRADE FROM SURFACE MOUNT EXTERIOR HIGH-OUTPUT LED SCENE LIGHT

- 12V (7" X 3") TO (9" X 7")

- CHROME MOUNTING BEZEL - *** DOES NOT INCLUDE WALL SWITCH ***

- (2) INTERIOR 15 AMP RECEPT - 120V

- GFCI PROTECTED WHERE REQUIRED BY CODE

- (1) 55 AMP CONVERTER WITH BATTERY CHARGER

- 5.5 KW ONAN GENERATOR PKG. - GAS (120V/240V)

- 24 GALLON IN FRAME FUEL TANK

- LOCKABLE CAST ALUMINUM FUEL DOOR

- GENERATOR WIRING & PREP

- REMOTE START

- INSULATED GENERATOR COMPARTMENT WITH GALVANIZED LINER

- 36" x 36" 405 SERIES VENTED TOP HINGED GEN DOOR

- 50 AMP AUTO TRANSFER SWITCH

- FUEL GAUGE

- BATTERY - 12V AGM (930 CA, 775 CCA)

- *** INCLUDES BATTERY - ISOLATED TO GENERATOR ONLY ***

- 1 UPGRADE FROM STANDARD INTERIOR GEN COMPARTMENT TO ATP TONGUE-MOUNTED GEN BOX

- INCLUDES 12" EXTENDED TONGUE

- EXPANDED METAL ON FLOOR OF COMPARTMENT

- GEN BOX & DOORS BUILT TO FIT SPECIFIC SIZE OF GEN

- INCLUDES GALVANIZED LINER FOR FRONT WALL OF TRAILER

- DOES NOT INCLUDE INSULATION OR GALVANIZED LINER

- (1) WHISPERMAT ACOUSTIC FOAM FOR GENERATOR COMPARTMENT

- 20 ft UPGRADE TO WHITE VINYL WALLS / FT (STD HEIGHT THRU 18" EXTRA HEIGHT)

- INCLUDES H-MOLDING TRIM - *** DELETES STANDARD 3/8" PLYWOOD ***

- 20 ft WHITE VINYL CEILING / FT 20 ft 1" E.P.S. INSULATED WALLS / FT (STD HEIGHT THRU 18" EXTRA HEIGHT) R-3

- *** 1" E.P.S. (STYROFOAM) ***

- 20 ft 1" E.P.S. INSULATED CEILING / FT R-3

- *** 1" E.P.S. (STYROFOAM) ***

- 20 ft BLACK COIN TPO FLOOR / FT

- (1) 13,500 BTU LOW PROFILE A/C (10.5" OVERALL HEIGHT) - DOMETIC

- THERMOSTAT IS OPTIONAL (THERMOSTAT IS REQUIRED ON DUCTED UNITS)

- DUCTING IS OPTIONAL

- HEAT STRIP IS OPTIONAL

- (1) 8' LOWER ALUMINUM CABINET

- 40"H x 24"D

- (1) 24" WIDE 7-DRAWER ALUMINUM CABINET INSERT - CHALLENGER

- 3 DRAWERS 4.25" EACH, 4 DRAWERS 5.25" EACH

- 100# PER DRAWER MAXIMUM

- 24"W x 39.25"H x 23"D

- (1) 8' UPPER ALUMINUM CABINET

- 18"H x 14"D

- 36 lft AIRLINE TRACK SURFACE MOUNTED / LIN FT

- 1 row just above floor level

- 1 row 36” AFF

- 36 lft AIRLINE TRACK RECESSED IN FLOOR / LIN FT

- (2) ROWS OF 18' EACH

- (1) 46" LED TV

- INCLUDES BACKER & WALL MOUNT - *** REQUIRES TV PREP PACKAGE OR OTHER INPUT ***

- (1) AM/FM/CD/DVD STEREO

- INCLUDES FOUR CUBE SPEAKERS

- INCLUDES ANTENNA

*** RCA RUN, TV, AND/OR TV PREP NOT INCLUDED - MUST BE SELECTED SEPARATELY ***

*** 12V BATTERY NOT INCLUDED ***

- 1 UPGRADE (2) INTERIOR SPEAKERS TO (2) EXTERIOR SPEAKERS

- 2 UPGRADE CUBE SPEAKER TO RECESSED CEILING MOUNTED SPEAKER

- 1 RCA 3-WIRE OUTLET - INTERIOR TO INTERIOR

FROM STEREO TO TV MONITOR

- INCLUDES CONNECTIVITY IN TWO LOCATIONS (BOTH INTERIOR)

- (1) 40" HIGH ATP KICKPLATE FOR WALLS

- (2) FULL SET OF QUICK DISCONNECT TIE DOWN STRAP CLAMPS

- (2) SPARE TIRES W/ RIMS PER TRAILER

3.0 Parts & Labor

Requirements:

1. Quote pricing for parts as separate line items.

2. Quote pricing for labor as a separate line item.

3. Contractor to provide all labor and tools necessary to install new parts.

4. Please note, the U.S. Coast Guard is tax exempt, and can provide exception certificate if requested.

4.0 Delivery/Shipping

Shipping Addresses:

02 Trailers to be shipped to:

MSST San Diego (91109) Tactical Delivery Team ATTN: BOSN2 Andrew Coppa 1022 Bay Marina Drive, Suite 125 National City, CA 91950

POC USCG Tactical Delivery Team: BOSN2 Andrew Coppa, (954) 673-2698

Requirements:

1. If applicable, quote delivery or freight costs as separate line items.

2. Upon award of contract, any applicable freight over $100.00 will require a certified freight bill from the carrier showing the actual freight costs charged to the vendor. Freight cannot be an inflated/mark up/profitable cost line item.

3. Contractor to unload all items and dispose of trash/packing material off base and not in a government recycle or waste container.

image1.jpeg