HC102818R00180001.docx

HC102818R0018

Section B - Supplies or Services and Prices

Software Support

FFP

Puget Sound Naval Shipyard

INSTALL 1005751

SOLID EDGE CLASSIC FLOATING (UNIQUE HOST ID METHOD) - ANNUAL MAINTENANCE

BRAND NAME/SOLE SOURCE: BN

MFR PART NR: SE320TC-M

FOB: Destination

PURCHASE REQUEST NUMBER: N4215818MP80045

NET AMT

Software Support

Puget Sound Naval Shipyard

INSTALL 1005751

SOLID EDGE XpresRoute - FLOATING - ANNUAL MAINTENANCE

BRAND NAME/SOLE SOURCE: BN

MFR PART NR: SE306-M

NET AMT

Software Support

Puget Sound Naval Shipyard

INSTALL 1005751

SOLID EDGE WIRE HARNESS DESIGN FLOATING - ANNUAL

BRAND NAME/SOLE SOURCE: BN

MFR PART NR: SE361-M

NET AMT

Software Support

Puget Sound Naval Shipyard

INSTALL: 1011107

Learning Advantage NX Membership Cast

BRAND NAME/SOLE SOURCE: BN

MFR PART NR: TG30002C-M

NET AMT

Software Support

Puget Sound Naval Shipyard

INSTALL: 1011107

NX S/W and Doc Media Site Set-Windows

BRAND NAME/SOLE SOURCE: BN

MFR PART NR: UG10000-WISD-M

NET AMT

Software Support

Puget Sound Naval Shipyard

INSTALL: 1011107

NX Render

BRAND NAME/SOLE SOURCE: BN

MFR PART NR: UG10660-M

NET AMT

Software Support

FFP

Puget Sound Naval Shipyard

INSTALL: 1011107

NX Visualize Shape

BRAND NAME/SOLE SOURCE: BN

MFR PART NR: UG10665-M

NET AMT

Software Support

Puget Sound Naval Shipyard

INSTALL: 1011107

NX Advanced Designer Bundle

BRAND NAME/SOLE SOURCE: BN

MFR PART NR: UG10765-M

NET AMT

Software Support

Puget Sound Naval Shipyard

INSTALL: 1011107

NX Open C and C++ Runtime

BRAND NAME/SOLE SOURCE: BN

MFR PART NR: UG12210-M

NET AMT

Software Support

Puget Sound Naval Shipyard

INSTALL: 1011107

NX Open Automation Studio Bundle

BRAND NAME/SOLE SOURCE: BN

MFR PART NR: UG12270-M

NET AMT

Software Support

Puget Sound Naval Shipyard

INSTALL: 1011107

NX Open Runtime Package

BRAND NAME/SOLE SOURCE: BN

MFR PART NR: UG12250-M

NET AMT

Software Support

Puget Sound Naval Shipyard

INSTALL: 1107107

Imageware Polygon Modeling

BRAND NAME/SOLE SOURCE: BN

MFR PART NR: A724-M

NET AMT

Software Support

Puget Sound Naval Shipyard

INSTALL: 1107107

Imageware Evaluation

BRAND NAME/SOLE SOURCE: BN

MFR PART NR: A738-M

NET AMT

Software Support

Puget Sound Naval Shipyard

INSTALL: 1107107

Imageware Surfacing

BRAND NAME/SOLE SOURCE: BN

MFR PART NR: A740-M

NET AMT

Software Support

Puget Sound Naval Shipyard

INSTALL: 1107107

Imageware Point Processing

BRAND NAME/SOLE SOURCE: BN

MFR PART NR: A742-M

NET AMT

Software Support

Puget Sound Naval Shipyard

INSTALL: 1107107

Imageware Inspection

BRAND NAME/SOLE SOURCE: BN

MFR PART NR: A743-M

NET AMT

Software Support

Puget Sound Naval Shipyard

INSTALL: 1109035

Imageware Polygon Modeling

BRAND NAME/SOLE SOURCE: BN

MFR PART NR: A724-M

NET AMT

Software Support

Puget Sound Naval Shipyard

INSTALL: 1109035

Imageware Evaluation

BRAND NAME/SOLE SOURCE: BN

MFR PART NR: A738-M

NET AMT

Software Support

Puget Sound Naval Shipyard

INSTALL: 1109035

Imageware Surfacing

BRAND NAME/SOLE SOURCE: BN

MFR PART NR: A740-M

NET AMT

Software Support

Puget Sound Naval Shipyard

INSTALL: 1109035

Imageware Point Processing

BRAND NAME/SOLE SOURCE: BN

MFR PART NR: A742-M

NET AMT

Software Support

Puget Sound Naval Shipyard

INSTALL: 1000397

Solid Edge Classic-Floating

BRAND NAME/SOLE SOURCE: BN

MFR PART NR: SE320TC-M

NET AMT

Software Support

Puget Sound Naval Shipyard

INSTALL: 1289016

Solid Edge Classic-Floating

BRAND NAME/SOLE SOURCE: BN

NET AMT

Software Support

Puget Sound Naval Shipyard

INSTALL: 1289016

Solid Edge XpressRoute Floating

BRAND NAME/SOLE SOURCE: BN

MFR PART NR: SE306-M

NET AMT

Software Support

Pearl Harbor Naval Shipyard

INSTALL: 1016379

Learning Advantage NX Membership Cast

BRAND NAME/SOLE SOURCE: BN

NET AMT

Software Support

Pearl Harbor Naval Shipyard

INSTALL: 1016379

NX Advanced Sheet Metal

BRAND NAME/SOLE SOURCE: BN

MFR PART NR: NX30111-M

NET AMT

Software Support

Pearl Harbor Naval Shipyard

INSTALL: 1016379

NX S/W and Doc Media Site Set-Windows

BRAND NAME/SOLE SOURCE: BN

NET AMT

Software Support

Pearl Harbor Naval Shipyard

INSTALL: 1016379

NX Render

BRAND NAME/SOLE SOURCE: BN

MFR PART NR: UG10660-M

NET AMT

Software Support

Pearl Harbor Naval Shipyard

INSTALL: 1016379

NX Advanced Designer Bundle

BRAND NAME/SOLE SOURCE: BN

NET AMT

Software Support

Pearl Harbor Naval Shipyard

INSTALL: 1016379

NX Manufacturing Bundle

BRAND NAME/SOLE SOURCE: BN

MFR PART NR: UG10770-M

NET AMT

Software Support

Pearl Harbor Naval Shipyard

INSTALL: 1016379

NX Turning

BRAND NAME/SOLE SOURCE: BN

MFR PART NR: UG11210-M

NET AMT

Software Support

Pearl Harbor Naval Shipyard

INSTALL: 1016379

NX Post Builder

BRAND NAME/SOLE SOURCE: BN

MFR PART NR: UG11216-M

NET AMT

Software Support

Pearl Harbor Naval Shipyard

INSTALL: 1016379

NX Sheet Metal

BRAND NAME/SOLE SOURCE: BN

MFR PART NR: UG11430-M

NET AMT

Software Support

Pearl Harbor Naval Shipyard

INSTALL: 1016379

NX Open C and C++ Runtime

BRAND NAME/SOLE SOURCE: BN

NET AMT

Software Support

Pearl Harbor Naval Shipyard

INSTALL: 1016379

NX Motion Simulation

BRAND NAME/SOLE SOURCE: BN

MFR PART NR: UG11031-M

NET AMT

Software Support

Pearl Harbor Naval Shipyard

INSTALL: 1373973

Solid Edge Classic Floating (Unique Host ID Method)

BRAND NAME/SOLE SOURCE: BN

NET AMT

Software Support

Pearl Harbor Naval Shipyard

INSTALL: 1394605

FEMAP (Node Locked)

BRAND NAME/SOLE SOURCE: BN

MFR PART NR: E002-M

NET AMT

Software Support

Pearl Harbor Naval Shipyard

INSTALL: 1394605

NX Nastran Upgrade for FEMAP (Node Locked)

BRAND NAME/SOLE SOURCE: BN

MFR PART NR: E500-M

NET AMT

Software Support

Portsmouth Naval Shipyard

INSTALL: 1020567

NX Total Machining - Maintenance

BRAND NAME/SOLE SOURCE: BN

MFR PART NR: NX13430-M

NET AMT

Software Support

Portsmouth Naval Shipyard

INSTALL: 1020567

NX AdvacedMetal Design

BRAND NAME/SOLE SOURCE: BN

MFR PART NR: NX30111-M

NET AMT

Software Support

Portsmouth Naval Shipyard

INSTALL: 1020567

NX S/W and Doc Media Site Set-Windows

BRAND NAME/SOLE SOURCE: BN

NET AMT

Software Support

Portsmouth Naval Shipyard

INSTALL: 1020567

NX Manufacturing Bundle

BRAND NAME/SOLE SOURCE: BN

NET AMT

Software Support

Portsmouth Naval Shipyard

INSTALL: 1020567

NX Sheet Metal

BRAND NAME/SOLE SOURCE: BN

MFR PART NR: UG11430-M

NET AMT

Software Support

Portsmouth Naval Shipyard

INSTALL: 1020567

NX Open C and C++ Runtime

BRAND NAME/SOLE SOURCE: BN

NET AMT

Software Support

Portsmouth Naval Shipyard

INSTALL: 1020567

Learning Advantage

BRAND NAME/SOLE SOURCE: BN

MFR PART NR: TG30000-M

NET AMT

Software Support

Portsmouth Naval Shipyard

INSTALL: 1018375

NX Advanced Designer Bundle

BRAND NAME/SOLE SOURCE: BN

NET AMT

Software Support

Portsmouth Naval Shipyard

INSTALL: 1024842

NX License Borrow Option

BRAND NAME/SOLE SOURCE: BN

MFR PART NR: NX21001-M

NET AMT

Software Support

Portsmouth Naval Shipyard

INSTALL: 1024842

NX S/W and Doc Media Site Set-Windows

BRAND NAME/SOLE SOURCE: BN

NET AMT

Software Support

Portsmouth Naval Shipyard

INSTALL: 1024842

NX Gateway

BRAND NAME/SOLE SOURCE: BN

MFR PART NR: UG10100-M

NET AMT

Software Support

Portsmouth Naval Shipyard

INSTALL: 1024842

NX Advanced Designer Bundle

BRAND NAME/SOLE SOURCE: BN

NET AMT

Software Support

Portsmouth Naval Shipyard

INSTALL: 1024842

NX Open C and C++ Runtime

BRAND NAME/SOLE SOURCE: BN

NET AMT

Software Support

Portsmouth Naval Shipyard

INSTALL: 1356539

Solid Edge Classic-Floating (Unique Host ID Method) - Annual Maintenance

BRAND NAME/SOLE SOURCE: BN

NET AMT

Software Support

Norfolk Naval Shipyard

INSTALL: 1009379

NX S/W and Doc Media Site SE-Windows

BRAND NAME/SOLE SOURCE: BN

NET AMT

Software Support

Norfolk Naval Shipyard

INSTALL: 1009379

NX Manufacturing Bundle

BRAND NAME/SOLE SOURCE: BN

NET AMT

Software Support

Norfolk Naval Shipyard

INSTALL: 1009379

NX Turning

BRAND NAME/SOLE SOURCE: BN

MFR PART NR: UG1210-M

NET AMT

Software Support

Norfolk Naval Shipyard

INSTALL: 1009379

NX Post Builder

BRAND NAME/SOLE SOURCE: BN

NET AMT

Software Support

Norfolk Naval Shipyard

INSTALL: 1009379

NX Nurbs Path Generator

BRAND NAME/SOLE SOURCE: BN

MFR PART NR: UG11275-M

NET AMT

Software Support

Norfolk Naval Shipyard

INSTALL: 1009379

NX Open C and C++ Runtime

BRAND NAME/SOLE SOURCE: BN

NET AMT

Software Support

Norfolk Naval Shipyard

INSTALL: 1009379

NX NC Simulation Add-on-Annual Maintenance - 7 months to sync

BRAND NAME/SOLE SOURCE: BN

MFR PART NR: NX30434-M

NET AMT

Software Support

Norfolk Naval Shipyard

INSTALL: 1009379

Simcenter Structures

BRAND NAME/SOLE SOURCE: BN

MFR PART NR: SC13500-M

NET AMT

Software Support

Norfolk Naval Shipyard

INSTALL: 1009379

NX Rapid Prototyping

BRAND NAME/SOLE SOURCE: BN

MFR PART NR: UG2070-M

NET AMT

Software Support

Norfolk Naval Shipyard

INSTALL: 1018276

Learning Advantage NX Membership Cast

BRAND NAME/SOLE SOURCE: BN

NET AMT

Software Support

Norfolk Naval Shipyard

INSTALL: 1018276

NX Wire EDM Add-On

BRAND NAME/SOLE SOURCE: BN

MFR PART NR: NX30431-M

NET AMT

Software Support

Norfolk Naval Shipyard

INSTALL: 1018276

NX S/W and Doc Media Site Set - Windows

BRAND NAME/SOLE SOURCE: BN

NET AMT

Software Support

Norfolk Naval Shipyard

INSTALL: 1018276

NX Advanced Designer Bundle

BRAND NAME/SOLE SOURCE: BN

NET AMT

Software Support

Norfolk Naval Shipyard

INSTALL: 1018276

NX Manufacturing Bundle

BRAND NAME/SOLE SOURCE: BN

NET AMT

Software Support

Norfolk Naval Shipyard

INSTALL: 1018276

NX Turning

BRAND NAME/SOLE SOURCE: BN

NET AMT

Software Support

Norfolk Naval Shipyard

INSTALL: 1018276

NX Post Builder

BRAND NAME/SOLE SOURCE: BN

MFR PART NR: UG11216-M

NET AMT

Software Support

Norfolk Naval Shipyard

INSTALL: 1212025

Solid Edge Classic-Floating (Unique Host ID Method)

BRAND NAME/SOLE SOURCE: BN

NET AMT

Section E - Inspection and Acceptance

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

Section F - Deliveries or Performance

DELIVERY INFORMATION

31-DEC-2018

1400 FARRAGUT AVENUE

BLDG. 850-A, 5TH FLOOR

BREMERTON WA 98314-5001

ELIZABETH MALHIOT

(360) 476-8650

N4523A

31-DEC-2018

N4523A

31-DEC-2018

N4523A

31-DEC-2018

N4523A

31-DEC-2018

N4523A

31-DEC-2018

N4523A

31-DEC-2018

N4523A

31-DEC-2018

N4523A

31-DEC-2018

N4523A

31-DEC-2018

N4523A

31-DEC-2018

N4523A

31-DEC-2018

N4523A

31-DEC-2018

N4523A

31-DEC-2018

N4523A

31-DEC-2018

N4523A

31-DEC-2018

N4523A

31-DEC-2018

N4523A

31-DEC-2018

N4523A

31-DEC-2018

N4523A

31-DEC-2018

N4523A

31-DEC-2018

N4523A

31-DEC-2018

N4523A

31-DEC-2018

N4523A

31-DEC-2018

PEARL HARBOR NAVAL SHIPYARD & IMF UIC N32253

BUILDING 167 RECEIVING

667 SAFEGUARD ST STE 100

JBPHH HI 96860-5033

CHELYSE LORENZO

808-473-8000 EXT 6296

N32253

31-DEC-2018

N32253

31-DEC-2018

N32253

31-DEC-2018

N32253

31-DEC-2018

N32253

31-DEC-2018

N32253

31-DEC-2018

N32253

31-DEC-2018

N32253

31-DEC-2018

N32253

31-DEC-2018

N32253

31-DEC-2018

N32253

31-DEC-2018

N32253

31-DEC-2018

N32253

31-DEC-2018

N32253

31-DEC-2018

PORTSMOUTH NAVAL SHIPYARD

BUILDING 170, 2ND FLOOR

PORTSMOUTH NH 03804-5000

NICHOLAS MARTIN

207-438-6363

N39040

31-DEC-2018

N39040

31-DEC-2018

N39040

31-DEC-2018

N39040

31-DEC-2018

N39040

31-DEC-2018

N39040

31-DEC-2018

N39040

31-DEC-2018

N39040

31-DEC-2018

N39040

31-DEC-2018

N39040

31-DEC-2018

N39040

31-DEC-2018

N39040

31-DEC-2018

N39040

31-DEC-2018

N39040

31-DEC-2018

BUILDING 74-2, CODE 1236

PORTSMOUTH VA 23709

JULIE REYNOLDS

757-396-8816

N42158

31-DEC-2018

N42158

31-DEC-2018

N42158

31-DEC-2018

N42158

31-DEC-2018

N42158

31-DEC-2018

N42158

31-DEC-2018

N42158

31-DEC-2018

N42158

31-DEC-2018

N42158

31-DEC-2018

N42158

31-DEC-2018

N42158

31-DEC-2018

N42158

31-DEC-2018

N42158

31-DEC-2018

N42158

31-DEC-2018

N42158

31-DEC-2018

N42158

31-DEC-2018

N42158

Section G - Contract Administration Data

Section I - Contract Clauses

CLAUSES INCORPORATED BY REFERENCE

CLAUSES INCORPORATED BY FULL TEXT

52.204-9000 POINTS OF CONTACT (AUG 2005)

Contracting Officer Name: Tricia L. Singler Organization/Office Symbol: DITCO/PL8321 Phone No.: 618-229-9378 E-Mail Address: tricia.l.singler.civ@mail.mil

Contract Specialist Name: Tricia L. Singler Organization/Office Symbol: DITCO/PL8321 Phone No.: 618-229-9378 E-Mail Address: tricia.l.singler.civ@mail.mil

COR/Mission Partner Point of Contact (Note: To be filled in upon contract award) Name:

Organization/Office Symbol:

Phone No.:

E-Mail Address:

Contractor Point of Contact Contractor Legal Business Name:

DUNS:

CAGE CODE:

Contractor POC:

E-Mail Address:

Phone Number:

Fax Number:

(End of clause)

52.204-9001 CONTRACT/ORDER CLOSEOUT—FIXED-PRICE, TIME-AND-MATERIALS, OR LABOR-HOURS (JAN 2007)

Timely contract closeout is a priority under this contract/order. The Contractor shall submit a final invoice within ninety (90) calendar days after the expiration of this contract/order, unless the Contractor requests and is granted an extension by the Contracting Officer, in writing. In addition, and concurrent with the submission of the final invoice, the Contractor shall notify the Contracting Officer of the amount of excess funds that can be deobligated from this contract/order so the closeout process can begin as soon as possible upon expiration of this contract/order. A bilateral contract/order closeout modification will be forwarded to the Contractor by the Contracting Officer and must be signed by the Contractor and returned to the Contracting Officer within thirty (30) calendar days of issuance of the modification. A Contractor’s failure to respond and/or sign the bilateral closeout modification within thirty (30) calendar days of receipt will constitute approval of the terms of the modification and the modification will subsequently be processed unilaterally by the Contracting Officer to deobligate excess funds and close this contract/order.

If this contract/order contains option periods, the Contractor is required to submit an invoice within ninety (90) calendar days after expiration of the base period of performance and the expiration of each exercised option period of performance to allow for deobligation of excess funds that were obligated in those respective periods of performance.

52.209-9000 ORGANIZATIONAL AND CONSULTANT CONFLICTS OF INTEREST (OCCI) (DEC 2014)

(a) An offeror shall identify in its proposal, quote, bid or any resulting contract, any potential or actual Organizational and Consultant Conflicts of Interest (OCCI) as described in FAR Subpart 9.5. This includes actual or potential conflicts of interests of proposed subcontractors. If an offeror identifies in its proposal, quote, bid or any resulting contract, a potential or actual conflict of interests the offeror shall submit an Organizational and Consultant Conflicts of Interest Mitigation Plan to the contracting officer. The Organizational and Consultant Conflicts of Interest Mitigation Plan shall describe how the offeror addresses potential or actual conflicts of interest and identify how they will avoid, neutralize, or mitigate present or future conflicts of interest.

(b) Offerors must consider whether their involvement and participation raises any OCCI issues, especially in the following areas when:

(1) Providing systems engineering and technical direction.

(2) Preparing specifications or work statements and/or objectives.

(3) Providing evaluation services.

(4) Obtaining access to proprietary information.

(c) If a prime contractor or subcontractor breaches any of the OCCI restrictions, or does not disclose or misrepresents any relevant facts concerning its conflict of interest, the government may take appropriate action, including terminating the contract, in additional to any remedies that may be otherwise permitted by the contract or operation of law.

52.212-1 INSTRUCTIONS TO OFFERORS--COMMERCIAL ITEMS (JAN 2017)

(a) North American Industry Classification System (NAICS) code and small business size standard. The NAICS code and small business size standard for this acquisition appear in Block 10 of the solicitation cover sheet (SF 1449). However, the small business size standard for a concern which submits an offer in its own name, but which proposes to furnish an item which it did not itself manufacture, is 500 employees.

(b) Submission of offers. Submit signed and dated offers to the office specified in this solicitation at or before the exact time specified in this solicitation. Offers may be submitted on the SF 1449, letterhead stationery, or as otherwise specified in the solicitation. As a minimum, offers must show--

(1) The solicitation number;

(2) The time specified in the solicitation for receipt of offers;

(3) The name, address, and telephone number of the offeror;

(4) A technical description of the items being offered in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary;

(5) Terms of any express warranty;

(6) Price and any discount terms;

(7) "Remit to" address, if different than mailing address;

(8) A completed copy of the representations and certifications at FAR 52.212-3 (see FAR 52.212-3(b) for those representations and certifications that the offeror shall complete electronically);

(9) Acknowledgment of Solicitation Amendments;

(10) Past performance information, when included as an evaluation factor, to include recent and relevant contracts for the same or similar items and other references (including contract numbers, points of contact with telephone numbers and other relevant information); and

(11) If the offer is not submitted on the SF 1449, include a statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation. Offers that fail to furnish required representations or information, or reject the terms and conditions of the solicitation may be excluded from consideration.

(c) Period for acceptance of offers. The offeror agrees to hold the prices in its offer firm for 30 calendar days from the date specified for receipt of offers, unless another time period is specified in an addendum to the solicitation.

(d) Product samples. When required by the solicitation, product samples shall be submitted at or prior to the time specified for receipt of offers. Unless otherwise specified in this solicitation, these samples shall be submitted at no expense to the Government, and returned at the sender's request and expense, unless they are destroyed during preaward testing.

(e) Multiple offers. Offerors are encouraged to submit multiple offers presenting alternative terms and conditions, including alternative line items (provided that the alternative line items are consistent with subpart 4.10 of the Federal Acquisition Regulation), or alternative commercial items for satisfying the requirements of this solicitation. Each offer submitted will be evaluated separately.

(f) Late submissions, modifications, revisions, and withdrawals of offers:

(1) Offerors are responsible for submitting offers, and any modifications, revisions, or withdrawals, so as to reach the Government office designated in the solicitation by the time specified in the solicitation. If no time is specified in the solicitation, the time for receipt is 4:30 p.m., local time, for the designated Government office on the date that offers or revisions are due.

(2)(i) Any offer, modification, revision, or withdrawal of an offer received at the Government office designated in the solicitation after the exact time specified for receipt of offers is “late” and will not be considered unless it is received before award is made, the Contracting Officer determines that accepting the late offer would not unduly delay the acquisition; and--

(A) If it was transmitted through an electronic commerce method authorized by the solicitation, it was received at the initial point of entry to the Government infrastructure not later than 5:00 p.m. one working day prior to the date specified for receipt of offers; or

(B) There is acceptable evidence to establish that it was received at the Government installation designated for receipt of offers and was under the Government's control prior to the time set for receipt of offers; or

(C) If this solicitation is a request for proposals, it was the only proposal received.

(ii) However, a late modification of an otherwise successful offer, that makes its terms more favorable to the Government, will be considered at any time it is received and may be accepted.

(3) Acceptable evidence to establish the time of receipt at the Government installation includes the time/date stamp of that installation on the offer wrapper, other documentary evidence of receipt maintained by the installation, or oral testimony or statements of Government personnel.

(4) If an emergency or unanticipated event interrupts normal Government processes so that offers cannot be received at the Government office designated for receipt of offers by the exact time specified in the solicitation, and urgent Government requirements preclude amendment of the solicitation or other notice of an extension of the closing date, the time specified for receipt of offers will be deemed to be extended to the same time of day specified in the solicitation on the first work day on which normal Government processes resume.

(5) Offers may be withdrawn by written notice received at any time before the exact time set for receipt of offers. Oral offers in response to oral solicitations may be withdrawn orally. If the solicitation authorizes facsimile offers, offers may be withdrawn via facsimile received at any time before the exact time set for receipt of offers, subject to the conditions specified in the solicitation concerning facsimile offers. An offer may be withdrawn in person by an offeror or its authorized representative if, before the exact time set for receipt of offers, the identity of the person requesting withdrawal is established and the person signs a receipt for the offer.

(g) Contract award (not applicable to Invitation for Bids). The Government intends to evaluate offers and award a contract without discussions with offerors. Therefore, the offeror's initial offer should contain the offeror's best terms from a price and technical standpoint. However, the Government reserves the right to conduct discussions if later determined by the Contracting Officer to be necessary. The Government may reject any or all offers if such action is in the public interest; accept other than the lowest offer; and waive informalities and minor irregularities in offers received.

(h) Multiple awards. The Government may accept any item or group of items of an offer, unless the offeror qualifies the offer by specific limitations. Unless otherwise provided in the Schedule, offers may not be submitted for quantities less than those specified. The Government reserves the right to make an award on any item for a quantity less than the quantity offered, at the unit prices offered, unless the offeror specifies otherwise in the offer.

(i) Availability of requirements documents cited in the solicitation. (1)(i) The GSA Index of Federal Specifications, Standards and Commercial Item Descriptions, FPMR Part 101-29, and copies of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained for a fee by submitting a request to--GSA Federal Supply Service Specifications Section, Suite 8100, 470 East L'Enfant Plaza, SW, Washington, DC 20407, Telephone (202) 619-8925, Facsimile (202) 619-8978.

(ii) If the General Services Administration, Department of Agriculture, or Department of Veterans Affairs issued this solicitation, a single copy of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained free of charge by submitting a request to the addressee in paragraph (i)(1)(i) of this provision. Additional copies will be issued for a fee.

(2) Most unclassified Defense specifications and standards may be downloaded from the following ASSIST websites:

(i) ASSIST (https://assist.dla.mil/online/start/).

(ii) Quick Search (http://quicksearch.dla.mil/).

(iii) ASSISTdocs.com (http://assistdocs.com).

(3) Documents not available from ASSIST may be ordered from the Department of Defense Single Stock Point (DoDSSP) by--

(i) Using the ASSIST Shopping Wizard (https://assist.dla.mil/wizard/index.cfm);

(ii) Phoning the DoDSSP Customer Service Desk (215) 697-2179, Mon-Fri, 0730 to 1600 EST; or

(iii) Ordering from DoDSSP, Building 4, Section D, 700 Robbins Avenue, Philadelphia, PA 19111-5094, Telephone (215) 697-2667/2179, Facsimile (215) 697-1462.

(4) Nongovernment (voluntary) standards must be obtained from the organization responsible for their preparation, publication, or maintenance.

(j) Unique entity identifier. (Applies to all offers exceeding $3,500, and offers of $3,500 or less if the solicitation requires the Contractor to be registered in the System for Award Management (SAM) database.) The Offeror shall enter, in the block with its name and address on the cover page of its offer, the annotation ``Unique Entity Identifier'' followed by the unique entity identifier that identifies the Offeror's name and address. The Offeror also shall enter its Electronic Funds Transfer (EFT) indicator, if applicable. The EFT indicator is a four-character suffix to the unique entity identifier. The suffix is assigned at the discretion of the Offeror to establish additional SAM records for identifying alternative EFT accounts (see subpart 32.11) for the same entity. If the Offeror does not have a unique entity identifier, it should contact the entity designated at www.sam.gov for unique entity identifier establishment directly to obtain one. The Offeror should indicate that it is an offeror for a Government contract when contacting the entity designated at www.sam.gov for establishing the unique entity identifier.

(k) System for Award Management. Unless exempted by an addendum to this solicitation, by submission of an offer, the offeror acknowledges the requirement that a prospective awardee shall be registered in the SAM database prior to award, during performance and through final payment of any contract resulting from this solicitation. If the Offeror does not become registered in the SAM database in the time prescribed by the Contracting Officer, the Contracting Officer will proceed to award to the next otherwise successful registered Offeror. Offerors may obtain information on registration and annual confirmation requirements via the SAM database accessed through https://www.acquisition.gov.

(l) Debriefing. If a post-award debriefing is given to requesting offerors, the Government shall disclose the following information, if applicable:

(1) The agency's evaluation of the significant weak or deficient factors in the debriefed offeror's offer.

(2) The overall evaluated cost or price and technical rating of the successful and the debriefed offeror and past performance information on the debriefed offeror.

(3) The overall ranking of all offerors, when any ranking was developed by the agency during source selection.

(4) A summary of the rationale for award;

(5) For acquisitions of commercial items, the make and model of the item to be delivered by the successful offeror.

(6) Reasonable responses to relevant questions posed by the debriefed offeror as to whether source-selection procedures set forth in the solicitation, applicable regulations, and other applicable authorities were followed by the agency.

(End of provision)

52.212-2 EVALUATION--COMMERCIAL ITEMS (OCT 2014)

1. The government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the government, price and other factors considered. Should only one quote be received, then the quote will be evaluated to determine that it is technically acceptable cost reasonable. Otherwise, a lowest priced technically acceptable evaluation methodology with be used, where award will be made on the basis of the lowest evaluated price that meets or exceeds the acceptability standards for non-price factors. The quoted sum of all requirement items will be used to determine the lowest priced offering, which will be evaluated and evaluations will continue to higher priced offerings only until the lowest priced technically acceptable and otherwise properly awardable offering is identified. The following subfactors will be used in evaluating the lowest priced quote.

0. Technically Acceptable Factor: As determined by the government, to be rated acceptable:

0. For the purposes of this procurement only, an authorized reseller is defined as an entity authorized by the OEM to sell their products to the Federal Government and to provide support for the OEM items, including new releases, version upgrades, revisions, corrections of reported errors, enhancements (to include instructions for implementation and operation for all software support levels and product versions), technical support, contractor resolutions to problems or failures, and the most current commercial release or version of the software. Quotations shall include a letter from the OEM confirming that the contractor is an authorized reseller, as defined above, as of the quotation due date. The letter from the OEM shall not be older than 30 days from the date quotations are due, shall be submitted on the OEM's letterhead, and shall be signed by an authorized representative of the OEM.

0. Provide the filled out solicitation and fill out total award amount in block 26, unit price and net amount for all CLINS for the entire brand-name government requirement without requiring additional terms and conditions.

Any quote failing to meet these requirements shall be eliminated from consideration for award. The government reserves the right to eliminate from consideration any quote that does not adhere to administrative requirements of this solicitation.

0. Price Reasonable Factor: The government will verify that all solicitation requirements have been priced, figures are correctly calculated, and prices are presented in a clear and useful format and are reasonable and complete. The government requests all available discounts. The proposed reduced pricing will not be subject to audit.

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL ITEMS (JAN 2017)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(3) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(4) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.)

X (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402).

X (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).

X (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (June 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

X (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2016) (Pub. L. 109-282) (31 U.S.C. 6101 note).

___ (5) [Reserved]

___ (6) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

X (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

___ (8) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Oct 2015) (31 U.S.C. 6101 note).

____ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (July 2013) (41 U.S.C. 2313).

____ (10) [Reserved]

____ (11)(i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (NOV 2011) (15 U.S.C. 657a).

____ (ii) Alternate I (NOV 2011) of 52.219-3.

____ (12) (i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (OCT 2014) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

____ (ii) Alternate I (JAN 2011) of 52.219-4.

____ (13) [Reserved]

X (14)(i) 52.219-6, Notice of Total Small Business Set-Aside (NOV 2011) (15 U.S.C. 644).

____ (ii) Alternate I (NOV 2011).

____ (iii) Alternate II (NOV 2011).

____ (15)(i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644).

____ (ii) Alternate I (Oct 1995) of 52.219-7.

____ (iii) Alternate II (Mar 2004) of 52.219-7.

____ (16) 52.219-8, Utilization of Small Business Concerns (Nov 2016) (15 U.S.C. 637(d)(2) and (3)).

____ (17)(i) 52.219-9, Small Business Subcontracting Plan (Jan 2017) (15 U.S.C. 637(d)(4)).

____ (ii) Alternate I (Nov 2016) of 52.219-9.

____ (iii) Alternate II (Nov 2016) of 52.219-9.

____ (iv) Alternate III (Nov 2016) of 52.219-9.

____ (v) Alternate IV (Nov 2016) of 52.219-9.

____ (18) 52.219-13, Notice of Set-Aside of Orders (NOV 2011) (15 U.S.C. 644(r)).

____ (19) 52.219-14, Limitations on Subcontracting (JAN 2017) (15 U.S.C. 637(a)(14)).

____ (20) 52.219-16, Liquidated Damages—Subcon-tracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)).

____ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (NOV 2011) (15 U.S.C. 657f).

X (22) 52.219-28, Post Award Small Business Program Rerepresentation (July 2013) (15 U.S.C. 632(a)(2)).

____ (23) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (Dec 2015) (15 U.S.C. 637(m)).

____(24) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Dec 2015) (15 U.S.C. 637(m)).

____ (25) 52.222-3, Convict Labor (June 2003) (E.O. 11755).

____(26) 52.222-19, Child Labor--Cooperation with Authorities and Remedies (Oct 2016) (E.O. 13126).

____ (27) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

X (28) 52.222-26, Equal Opportunity (Sept 2016) (E.O. 11246).

X (29) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212).

X (30) 52.222-36, Equal Opportunity for Workers with Disabilities (July 2014) (29 U.S.C. 793).

X (31) 52.222-37, Employment Reports on Veterans (FEB 2016) (38 U.S.C. 4212).

X (32) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).

X (33)(i) 52.222-50, Combating Trafficking in Persons (March 2, 2015) (22 U.S.C. chapter 78 and E.O. 13627).

____ (ii) Alternate I (March 2, 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

____ (34) 52.222-54, Employment Eligibility Verification (Oct 2015). (E. O. 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)

____ (35) 52.222-59, Compliance with Labor Laws (Executive Order 13673) (OCT 2016). (Applies at $50 million for solicitations and resultant contracts issued from October 25, 2016 through April 24, 2017; applies at $500,000 for solicitations and resultant contracts issued after April 24, 2017).

Note to paragraph (b)(35): By a court order issued on October 24, 2016, 52.222-59 is enjoined indefinitely as of the date of the order. The enjoined paragraph will become effective immediately if the court terminates the injunction. At that time, DoD, GSA, and NASA will publish a document in the Federal Register advising the public of the termination of the injunction.

____ (36) 52.222-60, Paycheck Transparency (Executive Order 13673) (OCT 2016).

____ (37)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

____ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

____ (38) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (June, 2016) (E.O. 13693).

____ (39) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (June, 2016) (E.O. 13693).

____ (40) (i) 52.223-13, Acquisition of EPEAT® Registered Imaging Equipment (Jun 2014) (E.O.s 13423 and 13514).

____ (ii) Alternate I (OCT 2015) of 52.223-13.

____ (41)(i) 52.223-14, Acquisition of EPEAT® Registered Televisions (Jun 2014) (E.O.s 13423 and 13514).

____ (ii) Alternate I (Jun 2014) of 52.223-14.

____ (42) 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42 U.S.C. 8259b).

____ (43)(i) 52.223-16, Acquisition of EPEAT[supreg]-Registered Personal Computer Products (OCT 2015) (E.O.s 13423 and 13514).

____ (ii) Alternate I (Jun 2014) of 52.223-16.

X (44) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011) (E.O. 13513).

X (48) 52.225-1, Buy American--Supplies (May 2014) (41 U.S.C. chapter 83).

____ (50) 52.225-5, Trade Agreements (Oct 2016) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

____ (51) 52.225-13, Restrictions on Certain Foreign Purchases (June 2008) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

____ (52) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

____ (53) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150

____ (54) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150).

____ (55) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).

____ (56) 52.232-30, Installment Payments for Commercial Items (Jan…