HATCHIE_NWR_CASE_MAG280_SPECIFICATIONS.pdf

SPECIFICATIONS

Project: Hatchie NWR Case IH MAGNUM 280 AFS

PR Number: PPR1017626 Item: Case IH MAGNUM 280 AFS Agricultural Tractor

1. Product Features:

Name of Item: Case IH MAG280 AFS Agricultural Tractor Manufacturer: Case IH Model Number: Magnum 280 AFS Salient Characteristics:

Engine: CASE IH FPT 8.7L, 6 cylinder Rated Engine Power: 280 HP, 209 kW, Max 350 HP, 261 kW @ 2000rpm Rated PTO power (HP SAE): 235 HP, 175kW, 1000 rpm standard Transmission: 19F/ 4R PowerDrive Hydraulic Pump Rated Output: Hi-flow hydraulic Rear Hitch Category: Category 3/3N Number of rear selective control valves: 5 or 6

Transmission heater, 2000 Lbs. inside wheel weights, Tire Pressure Monitor, Wide Rear Fenders, No Rear Maneuvering Wheels, True Ground Speed Radar, AFS Pro 1200 Double Mount, AFS CONCT 5ADV FT, 360 Work Lamp Package, 6 Paddles, ISO Bus Class 2, Brake Assist Steering Cab, Front Axle, Rear Axle, Front weight Frame w/ 6 Fri weights OR 6x120 lbs., PTO, Hitch, Hydraulic Pump, 5 OR 6 Rear Remotes, Front Fenders, Auto guidance, Connectivity 429561 AccuGuide Ready, PCM 4G USA, ISO BUS Class II, TEL 5YR SUB FT RDY, Deluxe Technology Cab, BRAKE ASSIST STEER, Dual Beacon Light w/oA, Engine Block & Trans Heater, 19F Speed Powershift Economy, True Ground Speed Sensor, Cat IV High Capacity Drawbar, Less Front hitch and PTO, Cat 3/3N Long Links Manual, Hi-Flow Hydraulic System 6 EHR Paddles, 5 Electric Remotes, Power Beyond/Motor Return Valves, 1000 RPM PTO Shaft, Class 4.75 Standard Axle, VF420/85R34 R1 W, Rear Axle 4.5in. dia.

x120 in., D 480/80R50 R1W, MFD Front Narrow Fenders, Wide 100.4 in./2550 mm, FWF w/ 6x120Ibs, North American English

Capabilities: The agricultural tractor will be used to prepare, plant and maintain mission critical crops on approximately 1,000 acres of agricultural fields and moist soil units on the refuge. The tractor will be used to pull a Turbo Max 2400MT 24’ wide vertical tillage seedbed preparation tool as well as a John Deere 637 disk. The tractor will be used to pull a John Deere 13 yd. scraper dirt pan used to maintain levees, agricultural fields and roads throughout the refuge.

2. Delivery:

Prices quoted must be FOB Destination “F.o.b. destination” means --Free of expense to the Government delivered, on board the carrier’s conveyance, at a specified delivery point where the consignee’s facility (plant, warehouse, store, lot, or other location to which shipment can be made) is located; and supplies shall be delivered to the destination consignee’s wharf (if destination is a port city and supplies are for export), warehouse unloading platform, or receiving dock, at the expense of the contractor. The Government shall not be liable for any delivery, storage, demurrage, accessorial, or other charges involved before the actual delivery (or “constructive placement” as defined in carrier tariffs) of the supplies to the destination, unless such charges are caused by an act or order of the Government acting in its contractual capacity. If rail carrier is used, supplies shall be delivered to the specified unloading platform of the consignee. If motor carrier (including “piggyback”) is used, supplies shall be delivered to truck tailgate at the unloading platform of the consignee, except when the supplies delivered meet the requirements of Item 568 of the National Motor Freight Classification for “heavy or bulky freight.” When supplies meeting the requirements of the referenced Item 568 are delivered, unloading (including movement to the tailgate) shall be performed by the consignee, with assistance from the truck driver, if requested. If the contractor uses rail carrier or freight forwarder for less than carload shipments, the contractor shall ensure that the carrier will furnish tailgate delivery when required, if transfer to truck is required to complete delivery to consignee.

Contractor responsibilities. The contractor shall -- (1)(i) Pack and mark the shipment to comply with contract specifications; or

(ii) In the absence of specifications, prepare the shipment in conformance with carrier requirements;

(2) Prepare and distribute commercial bills of lading;

(3) Deliver the shipment in good order and condition to the point of delivery specified in the contract;

(4) Be responsible for any loss of and/or damage to the goods occurring before receipt of the shipment by the consignee at the delivery point specified in the contract;

(5) Furnish a delivery schedule and designate the mode of delivering carrier; and

(6) Pay and bear all charges to the specified point of delivery.

3. Delivery Location:

Product shall be delivered to the following location:

Hatchie National Wildlife Refuge- Maintenance Shop 1493 Hillville Loop Road Whiteville, TN 38075

4. Installation:

Prices quoted must include installation. All labor and parts associated with and required for installation are the sole responsibility of the contractor. No assistance or equipment will be provided by the government. Installation shall be completed according to industry standards.

5. Technical Point of Contact (POC):

Hatchie National Wildlife Refuge James Roberts 6772 Hwy 76S Stanton, TN 38069 731-772-0501

6. Delivery Instructions:

No later than three days prior to delivery, please contact the Point of Contact listed above, to arrange a specific time for delivery. Unloading the product is the sole responsibility of the delivery carrier. No labor or equipment will be provided by the government to unload the supplies.

7. Customer Specific Delivery requirements: N/A