HAMP_ADA_Lift_Replacement_SOW_8-5-2024pdf.pdf
PDF 615 KB Posted
- Attached to
- FOMC ADA LIFT REPLACEMENT Federal contract opportunity
- Solicitation number
- 140P4225R0006
About this file
This Statement of Work details the requirements for replacing a wheelchair platform lift at the Hampton National Historic Site mansion in Towson, Maryland. The Department of the Interior National Park Service Northeast Region seeks to replace a non-functioning lift with a new system capable of traversing 5 steps with a maximum height of 37.5 inches.
Technical specifications include a 42-inch door opening width, 120v/20A/60Hz electrical service with disconnect switch, and existing reinforcing steel members through the floor that can potentially be reused. The new lift must accommodate standard wheelchairs and mobility service units with passengers, and there is a preference for American-made equipment. The contract will be awarded as a firm-fixed price agreement under solicitation number 140P4225R0006.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Sol_140P4225R0006_Amd_0002.pdf | ||
| Vendor_questions_with_answers_0002.docx | DOCX document | |
| wage_determination_0001.txt | TXT text file | |
| Sol_140P4225R0006_Amd_0001.pdf | ||
| Sol_140P4225R0006.pdf | ||
| clauses_and_provisions.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Hampton National Historic Site is looking to replace a non functioning wheel chair platform lift in the Mansion at 535 Hampton Lane Towson MD 21286. We need to have a wheel chair platform lift that is capable to transit 5 steps with the top one being 37.5 inches high. The current door opening is 42 inces wide. It needs to be able to lift the average wheel chair and or mobility servicing unit with a passenger. Current electrical service is 120v/20A/60Hz with a disconnect switch. Due to the floor structure the old lift is attached to a reinforcing steel members through the floor to the foundation underneath, these members will remain for possible reuse of a new system if needed. The new lift prefertable should be made in America.
File details come from the government source that posted it. Updated .