Federal Supply Schedule GS35F4677G

AUTHORIZED

INFORMATION TECHNOLOGY SCHEDULE PRICELIST

GENERAL PURPOSE COMMERCIAL INFORMATION TECHNOLOGY

EQUIPMENT, SOFTWARE AND SERVICES

Contractor has been awarded cooperative purchasing and disaster recovery programs for all SINs.

SPECIAL ITEM NUMBER 132-8 – PURCHASE OF EQUIPMENT

FSC CLASS 7010 – SYSTEM CONFIGURATION

End User Computers/Desktop Computers

Professional Workstations

Servers

Laptop/Portable/Notebook Computers

FSC CLASS 7025 – INPUT/OUTPUT AND STORAGE DEVICES

Printers

Displays

Graphics, including Video Graphics, Light Pens, Digitizers, Scanners, and Touch Screens

Network Equipment

Storage Devices, including Magnetic Storage, Magnetic Tape, and Optical Disk

FSC CLASS 5805 – TELEPHONE AND TELEGRAPH EQUIPMENT

Audio and Visual Teleconferencing Equipment

SPECIAL ITEM NUMBER 132-12 – MAINTENANCE OF EQUIPMENT, REPAIR SERVICE, AND

REPAIR PARTS/SPARE PARTS (FPDS Code J070 - Maintenance and Repair Service)(Repair Parts/Spare

Parts - See FSC Class for basic equipment)

Repair Service

Repair Parts/Spare Parts

Maintenance

Third Party Maintenance

SPECIAL ITEM NUMBER 132-33 – PERPETUAL SOFTWARE LICENSES

FSC CLASS 7030 - INFORMATION TECHNOLOGY SOFTWARE

Microcomputers

Application Software

SPECIAL ITEM NUMBER 132-51 - INFORMATION TECHNOLOGY (IT) PROFESSIONAL SERVICES

FPDS Code D308 Programming Services

FPDS Code D311 IT Data Conversion Services

NCS TECHNOLOGIES, INC

7669 LIMESTONE DRIVE

GAINESVILLE, VA 20155-4038

Phone: 703-743-8500 Fax: 703-621-1701 http://www.ncst.com Contract Number: GS-35F-4677G

Period Covered by Contract: May 15, 1997 through May 14, 2017 General Services Administration Federal Acquisition Service

Pricelist current through Modification # 0386, dated April 14, 2017.

Products and ordering information in this Authorized Information Technology Schedule Pricelist are also available on the GSA Advantage! System

(http://www.gsaadvantage.gov).

http://www.ncst.com/

TABLE OF CONTENTS

INFORMATION FOR ORDERING ACTIVITIES APPLICABLE TO ALL SPECIAL ITEM NUMBERS

TERMS AND CONDITIONS APPLICABLE TO PURCHASE OF NEW EQUIPMENT (SIN 132-8) AND

MAINTENANCE OF EQUIPMENT, REPAIR SERVICE, AND REPAIR PARTS/SPARE PARTS (SIN 132-12) .. 11

TERMS AND CONDITIONS APPLICABLE TO PERPETUAL SOFTWARE LICENSES (SIN 132-33)

TERMS AND CONDITIONS APPLICABLE TO INFORMATION TECHNOLOGY (IT) PROFESSIONAL

SERVICES (SIN 132-51)

BLANKET PURCHASE AGREEMENTS (BPA)

BPA FORMAT GUIDELINES

CONTRACTOR TEAM ARRANGEMENTS

USA COMMITMENT TO PROMOTE SMALL BUSINES PARTICIPATION PROCUREMENT PROGRAM

NCS TECHNOLOGIES, INC. AUTHORIZED GSA PRICE LIST FOR NEW EQUIPMENT (SIN 132-8) AND

MAINTENANCE OF EQUIPMENT, REPAIR SERVICE, AND REPAIR PARTS/SPARE PARTS (SIN 132-12) . 27

NCS TECHNOLOGIES, INC. AUTHORIZED GSA PRICE LIST FOR PERPETUAL SOFTWARE LICENSES

(SIN 132-33)

NCS TECHNOLOGIES, INC. AUTHORIZED GSA PRICE LIST FOR INFORMATION TECHNOLOGY (IT)

PROFESSIONAL SERVICES (SIN 132-51)

NCS Technologies, Inc. GS-35F-4677G Page 3

703-743-8500

INFORMATION FOR ORDERING ACTIVITIES

APPLICABLE TO ALL SPECIAL ITEM NUMBERS

SPECIAL NOTICE TO AGENCIES: Small Business Participation

SBA strongly supports the participation of small business concerns in the Federal Acquisition Service. To enhance

Small Business Participation SBA policy allows agencies to include in their procurement base and goals, the dollar value of orders expected to be placed against the Federal Supply Schedules, and to report accomplishments against these goals.

For orders exceeding the micropurchase threshold, FAR 8.404 requires agencies to consider the catalogs/pricelists of at least three schedule contractors or consider reasonably available information by using the GSA Advantage!

on-line shopping service (www.gsaadvantage.gov). The catalogs/pricelists, GSA Advantage! and the Federal

Acquisition Service Home Page (www.gsa.gov/fas) contain information on a broad array of products and services offered by small business concerns.

This information should be used as a tool to assist ordering activities in meeting or exceeding established small business goals. It should also be used as a tool to assist in including small, small disadvantaged, and women-owned small businesses among those considered when selecting pricelists for a best value determination.

For orders exceeding the micropurchase threshold, customers are to give preference to small business concerns when two or more items at the same delivered price will satisfy their requirement.

1. GEOGRAPHIC SCOPE OF CONTRACT

Domestic delivery is delivery within the 48 contiguous states, Alaska, Hawaii, Puerto Rico, Washington, DC, and U.S. Territories. Domestic delivery also includes a port or consolidation point, within the aforementioned areas, for orders received from overseas activities.

Overseas delivery is delivery to points outside of the 48 contiguous states, Washington, DC, Alaska, Hawaii, Puerto Rico, and U.S. Territories.

[X] The Geographic Scope of Contract will be domestic and overseas delivery.

[ ] The Geographic Scope of Contract will be overseas delivery only.

[ ] The Geographic Scope of this Contract is domestic delivery only.

2. CONTRACTOR’S ORDERING ADDRESS AND PAYMENT INFORMATION:

Ordering and Payment Address

NCS Technologies, Inc.

7669 Limestone Drive

Gainesville, VA 20155

Contractor must accept the credit card for payments equal to or less than the micro-purchase for oral or written orders under this contract. The Contractor and the ordering agency may agree to use the credit card for dollar amounts over the micro-purchase threshold (See GSAR 552.232-79 Payment by Credit Card). In addition, bank account information for wire transfer payments will be shown on the invoice.

The following telephone number can be used by ordering activities to obtain technical and/or ordering assistance: 703-743-8500.

3. LIABILITY FOR INJURY OR DAMAGE

The Contractor shall not be liable for any injury to ordering activity personnel or damage to ordering activity property arising from the use of equipment maintained by the Contractor, unless such injury or damage is due to the fault or negligence of the Contractor.

4. STATISTICAL DATA FOR GOVERNMENT ORDERING OFFICE COMPLETION OF

STANDARD FORM 279:

NCS Technologies, Inc. GS-35F-4677G Page 4

Block 9: G. Order/Modification Under Federal Schedule Contract

Block 16: Data Universal Numbering System (DUNS) Number: 96-100-3720

Block 30: Type of Contractor: Small Disadvantaged Business

Block 31: Woman-Owned Small Business - No

Block 37: Contractor's Taxpayer Identification Number (TIN): 52-1822366

Block 40: Veteran Owned Small Business (VOSB): No

a. CAGE Code: 1BEK6

b. Contractor has registered with the Central Contractor Registration Database (SAM.gov).

5. FOB DESTINATION

6. DELIVERY SCHEDULE

a. TIME OF DELIVERY: The Contractor shall deliver to destination within the number of calendar days after receipt of order (ARO), as set forth below:

SPECIAL ITEM NUMBER DELIVERY TIME (Days ARO)

132-8 30 Days

132-12 30 Days

132-33 30 Days

132-51 As negotiated

b. URGENT REQUIREMENTS

When the Federal Supply Schedule contract delivery period does not meet the bona fide urgent delivery requirements of an ordering activity, ordering activities are encouraged, if time permits, to contact the

Contractor for the purpose of obtaining accelerated delivery. The Contractor shall reply to the inquiry within 3 workdays after receipt. (Telephonic replies shall be confirmed by the Contractor in writing.) If the Contractor offers an accelerated delivery time acceptable to the ordering activity, any order(s) placed pursuant to the agreed upon accelerated delivery time frame shall be delivered within this shorter delivery time and in accordance with all other terms and conditions of the contract.

7. DISCOUNTS

Prices shown are NET Prices; Basic Discounts have been deducted.

a. Prompt Payment: NET30 days from receipt of invoice or date of acceptance, whichever is later.

b. Quantity: NCS may offer an additional quantity discount on a case-by-case basis. Ordering activities are encouraged to inquire about this discount when placing orders.

c. Dollar Volume: NCS may offer an additional dollar volume discount on a case-by-case basis.

Ordering activities are encouraged to inquire about this discount when placing orders.

d. Other Special Discounts (i.e. Government Education Discounts, etc.): NCS offers the same discounts to these institutions as it does to all other Government customers.

8. TRADE AGREEMENTS ACT OF 1979, as amended

All items are U.S. made end products, designated country end products, Caribbean Basin country end products, Canadian end products, or Mexican end products as defined in the Trade Agreements Act of 1979, as amended.

NCS Technologies, Inc. GS-35F-4677G Page 5

9. STATEMENT CONCERNING AVAILABILITY OF EXPORT PACKING: None

10. SMALL REQUIREMENTS

The minimum dollar of orders to be issued is $100

11. MAXIMUM ORDER (All dollar amounts are exclusive of any discount for prompt payment.)

a. The Maximum Order for the following Special Item Numbers (SINs) is $500,000:

Special Item Number 132-8 – Purchase of Equipment

Special Item Number 132-12 – Maintenance of Equipment, Repair Service and Repair/Spare Parts

Special Item Number 132-33 – Perpetual Software License

Special Item Number 132-51 – Information Technology Professional Services

12. ORDERING PROCEDURES FOR FEDERAL SUPPLY SCHEDULE CONTRACTS

Ordering activities shall use the ordering procedures of Federal Acquisition Regulation (FAR) 8.405 when placing an order or establishing a BPA for supplies or services. These procedures apply to all schedules.

a. FAR 8.405-1 Ordering procedures for supplies, and services not requiring a statement of work.

b. FAR 8.405-2 Ordering procedures for services requiring a statement of work.

13. FEDERAL INFORMATION TECHNOLOGY/TELECOMMUNICATION STANDARDS

REQUIREMENTS

Ordering activities acquiring products from this Schedule must comply with the provisions of the Federal

Standards Program, as appropriate (reference: NIST Federal Standards Index). Inquiries to determine whether or not specific products listed herein comply with Federal Information Processing Standards (FIPS) or Federal Telecommunication Standards (FED-STDS), which are cited by ordering activities, shall be responded to promptly by the Contractor.

13.1 FEDERAL INFORMATION PROCESSING STANDARDS PUBLICATIONS (FIPS PUBS)

Information Technology products under this Schedule that do not conform to Federal Information

Processing Standards (FIPS) should not be acquired unless a waiver has been granted in accordance with the applicable "FIPS Publication." Federal Information Processing Standards Publications (FIPS PUBS) are issued by the U.S. Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security Act. Information concerning their availability and applicability should be obtained from the National Technical Information Service (NTIS), 5285 Port Royal Road, Springfield, Virginia 22161. FIPS PUBS include voluntary standards when these are adopted for Federal use.

Individual orders for FIPS PUBS should be referred to the NTIS Sales Office, and orders for subscription service should be referred to the NTIS Subscription Officer, both at the above address, or telephone number

(703) 487-4650.

13.2 FEDERAL TELECOMMUNICATION STANDARDS (FED-STDS)

Telecommunication products under this Schedule that do not conform to Federal Telecommunication

Standards (FED-STDS) should not be acquired unless a waiver has been granted in accordance with the applicable "FED-STD." Federal Telecommunication Standards are issued by the U.S. Department of

Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security Act.

Ordering information and information concerning the availability of FED-STDS should be obtained from the

GSA, Federal Acquisition Service, Specification Section, 470 East L’Enfant Plaza, Suite 8100, SW, Washington, DC 20407, telephone number (202)619-8925. Please include a self-addressed mailing label

NCS Technologies, Inc. GS-35F-4677G Page 6 when requesting information by mail. Information concerning their applicability can be obtained by writing or calling the U.S. Department of Commerce, National Institute of Standards and Technology, Gaithersburg, MD 20899, telephone number (301)975-2833.

14. CONTRACTOR TASKS / SPECIAL REQUIREMENTS (C-FSS-370) (NOV 2003)

a. Security Clearances: The Contractor may be required to obtain/possess varying levels of security clearances in the performance of orders issued under this contract. All costs associated with obtaining/possessing such security clearances should be factored into the price offered under the

Multiple Award Schedule.

b. Travel: The Contractor may be required to travel in performance of orders issued under this contract. Allowable travel and per diem charges are governed by Pub .L. 99-234 and FAR Part 31, and are reimbursable by the ordering agency or can be priced as a fixed price item on orders placed under the Multiple Award Schedule. Travel in performance of a task order will only be reimbursable to the extent authorized by the ordering agency. The Industrial Funding Fee does

NOT apply to travel and per diem charges.

c. Certifications, Licenses and Accreditations: As a commercial practice, the Contractor may be required to obtain/possess any variety of certifications, licenses and accreditations for specific

FSC/service code classifications offered. All costs associated with obtaining/ possessing such certifications, licenses and accreditations should be factored into the price offered under the

Multiple Award Schedule program.

d. Insurance: As a commercial practice, the Contractor may be required to obtain/possess insurance coverage for specific FSC/service code classifications offered. All costs associated with obtaining/possessing such insurance should be factored into the price offered under the Multiple

Award Schedule program.

e. Personnel: The Contractor may be required to provide key personnel, resumes or skill category descriptions in the performance of orders issued under this contract. Ordering activities may require agency approval of additions or replacements to key personnel.

f. Organizational Conflicts of Interest: Where there may be an organizational conflict of interest as determined by the ordering agency, the Contractor’s participation in such order may be restricted in accordance with FAR Part 9.5.

g. Documentation/Standards: The Contractor may be requested to provide products or services in accordance with rules, regulations, OMB orders, standards and documentation as specified by the agency’s order.

h. Data/Deliverable Requirements: Any required data/deliverables at the ordering level will be as specified or negotiated in the agency’s order.

i. Government-Furnished Property: As specified by the agency’s order, the Government may provide property, equipment, materials or resources as necessary.

j. Availability of Funds: Many Government agencies’ operating funds are appropriated for a specific fiscal year. Funds may not be presently available for any orders placed under the contract or any option year. The Government’s obligation on orders placed under this contract is contingent upon the availability of appropriated funds from which payment for ordering purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are available to the ordering Contracting Officer.

NCS Technologies, Inc. GS-35F-4677G Page 7

k. Overtime: For professional services, the labor rates in the Schedule should not vary by virtue of the

Contractor having worked overtime. For services applicable to the Service Contract Act (as identified in the Schedule), the labor rates in the Schedule will vary as governed by labor laws

(usually assessed a time and a half of the labor rate).

15. CONTRACT ADMINISTRATION FOR ORDERING ACTIVITIES

Any ordering activity, with respect to any one or more delivery orders placed by it under this contract, may exercise the same rights of termination as might the GSA Contracting Officer under provisions of FAR

52.212-4, paragraphs (l) Termination for the ordering activity’s convenience, and (m) Termination for Cause

(See 52.212-4)

16. GSA ADVANTAGE!

GSA Advantage! is an on-line, interactive electronic information and ordering system that provides on-line access to vendors' schedule prices with ordering information. GSA Advantage! will allow the user to perform various searches across all contracts including, but not limited to:

(1) Manufacturer;

(2) Manufacturer's Part Number; and

(3) Product categories.

Agencies can browse GSA Advantage! by accessing the Internet World Wide Web utilizing a browser (ex.:

NetScape). The Internet address is http://www.gsaadvantage.gov

17. PURCHASE OF OPEN MARKET ITEMS

NOTE: Open Market Items are also known as incidental items, noncontract items, non-Schedule items, and items not on a Federal Supply Schedule contract. Ordering Activities procuring open market items must follow FAR 8.402(f).

For administrative convenience, an ordering activity contracting officer may add items not on the Federal

Supply Multiple Award Schedule (MAS) -- referred to as open market items -- to a Federal Supply Schedule blanket purchase agreement (BPA) or an individual task or delivery order, only if-

(1) All applicable acquisition regulations pertaining to the purchase of the items not on the Federal Supply

Schedule have been followed (e.g., publicizing (Part 5), competition requirements (Part 6), acquisition of commercial items (Part 12), contracting methods (Parts 13, 14, and 15), and small business programs

(Part 19));

(2) The ordering activity contracting officer has determined the price for the items not on the Federal

Supply Schedule is fair and reasonable;

(3) The items are clearly labeled on the order as items not on the Federal Supply Schedule; and

(4) All clauses applicable to items not on the Federal Supply Schedule are included in the order.

18. CONTRACTOR COMMITMENTS, WARRANTIES AND REPRESENTATIONS

a. For the purpose of this contract, commitments, warranties and representations include, in addition to those agreed to for the entire schedule contract:

(1) Time of delivery/installation quotations for individual orders;

(2) Technical representations and/or warranties of products concerning performance, total system performance and/or configuration, physical, design and/or functional characteristics and capabilities http://www.gsaadvantage.gov/

NCS Technologies, Inc. GS-35F-4677G Page 8 of a product/equipment/ service/software package submitted in response to requirements which result in orders under this schedule contract.

(3) Any representations and/or warranties concerning the products made in any literature, description, drawings and/or specifications furnished by the Contractor.

b. The above is not intended to encompass items not currently covered by the GSA Schedule contract.

c. The maintenance/repair service provided is the standard commercial terms and conditions for the type of products and/or services awarded.

19. OVERSEAS ACTIVITIES

The terms and conditions of this contract shall apply to all orders for installation, maintenance and repair of equipment in areas listed in the pricelist outside the 48 contiguous states and the District of Columbia, except as indicated below: None

Upon request of the Contractor, the ordering activity may provide the Contractor with logistics support, as available, in accordance with all applicable ordering activity regulations. Such ordering activity support will be provided on a reimbursable basis, and will only be provided to the Contractor's technical personnel whose services are exclusively required for the fulfillment of the terms and conditions of this contract.

20. BLANKET PURCHASE AGREEMENTS (BPAs)

The use of BPAs under any schedule contract to fill repetitive needs for supplies or services is allowable.

BPAs may be established with one or more schedule contractors. The number of BPAs to be established is within the discretion of the ordering activity establishing the BPA and should be based on a strategy that is expected to maximize the effectiveness of the BPA(s). Ordering activities shall follow FAR 8.405-3 when creating and implementing BPA(s).

21. CONTRACTOR TEAM ARRANGEMENTS

Contractors participating in contractor team arrangements must abide by all terms and conditions of their respective contracts. This includes compliance with Clauses 552.238-74, Industrial Funding Fee and Sales

Reporting, i.e., each contractor (team member) must report sales and remit the IFF for all products and services provided under its individual contract.

22. INSTALLATION, DEINSTALLATION, REINSTALLATION

The Davis-Bacon Act (40 U.S.C. 276a-276a-7) provides that contracts in excess of $2,000 to which the

United States or the District of Columbia is a party for construction, alteration, or repair (including painting and decorating) of public buildings or public works with the United States, shall contain a clause that no laborer or mechanic employed directly upon the site of the work shall receive less than the prevailing wage rates as determined by the Secretary of Labor. The requirements of the Davis-Bacon Act do not apply if the construction work is incidental to the furnishing of supplies, equipment, or services. For example, the requirements do not apply to simple installation or alteration of a public building or public work that is incidental to furnishing supplies or equipment under a supply contract. However, if the construction, alteration or repair is segregable and exceeds $2,000, then the requirements of the Davis-Bacon Act apply.

The ordering activity issuing the task order against this contract will be responsible for proper administration and enforcement of the Federal labor standards covered by the Davis-Bacon Act. The proper Davis-Bacon wage determination will be issued by the ordering activity at the time a request for quotations is made for applicable construction classified installation, deinstallation, and reinstallation services under SIN 132-8 or

132-9.

NCS Technologies, Inc. GS-35F-4677G Page 9

23. SECTION 508 COMPLIANCE

I certify that in accordance with 508 of the Rehabilitation Act of 1973, as amended (29 U.S.C. 794d), FAR

39.2, and the Architectural and Transportation Barriers Compliance Board Electronic and Information

Technology (EIT) Accessibility Standards (36 CFR 1194) General Services Administration (GSA), that all

IT hardware/software/services are 508 compliant: Yes, where applicable.

Section 508 compliance information on the supplies and services in this contract are available at the following website address (URL): http://www.ncst.com/content/section-508

The EIT standard can be found at: www.Section508.gov/.

24. PRIME CONTRACTOR ORDERING FROM FEDERAL SUPPLY SCHEDULES.

Prime Contractors (on cost reimbursement contracts) placing orders under Federal Supply Schedules, on behalf of an ordering activity, shall follow the terms of the applicable schedule and authorization and include with each order –

a. A copy of the authorization from the ordering activity with whom the contractor has the prime contract

(unless a copy was previously furnished to the Federal Supply Schedule contractor); and

b. The following statement:

This order is placed under written authorization from _______ dated _______. In the event of any inconsistency between the terms and conditions of this order and those of your Federal Supply Schedule contract, the latter will govern.

25. INSURANCE—WORK ON A GOVERNMENT INSTALLATION (JAN 1997)(FAR 52.228-5)

a. The Contractor shall, at its own expense, provide and maintain during the entire performance of this contract, at least the kinds and minimum amounts of insurance required in the Schedule or elsewhere in the contract.

b. Before commencing work under this contract, the Contractor shall notify the Contracting Officer in writing that the required insurance has been obtained. The policies evidencing required insurance shall contain an endorsement to the effect that any cancellation or any material change adversely affecting the Government's interest shall not be effective—

(1) For such period as the laws of the State in which this contract is to be performed prescribe;

or

(2) Until 30 days after the insurer or the Contractor gives written notice to the Contracting

Officer, whichever period is longer.

c. The Contractor shall insert the substance of this clause, including this paragraph (c), in subcontracts under this contract that require work on a Government installation and shall require subcontractors to provide and maintain the insurance required in the Schedule or elsewhere in the contract. The

Contractor shall maintain a copy of all subcontractors' proofs of required insurance, and shall make copies available to the Contracting Officer upon request.

26. SOFTWARE INTEROPERABILITY

Offerors are encouraged to identify within their software items any component interfaces that support open standard interoperability. An item’s interface may be identified as interoperable on the basis of participation http://www.ncst.com/content/section-508 http://www.section508.gov/

NCS Technologies, Inc. GS-35F-4677G Page 10 in a Government agency-sponsored program or in an independent organization program. Interfaces may be identified by reference to an interface registered in the component registry located at http://www.core.gov.

27. ADVANCE PAYMENTS

A payment under this contract to provide a service or deliver an article for the United States Government may not be more than the value of the service already provided or the article already delivered. Advance or pre-payment is not authorized or allowed under this contract. (31 U.S.C. 3324) http://www.core.gov/

NCS Technologies, Inc. GS-35F-4677G Page 11

TERMS AND CONDITIONS APPLICABLE TO PURCHASE OF

NEW EQUIPMENT (SPECIAL ITEM NUMBER 132-8) AND MAINTENANCE OF

EQUIPMENT, REPAIR SERVICE, AND REPAIR PARTS/SPARE PARTS (SPECIAL

ITEM NUMBER 132-12)

1. MATERIAL AND WORKMANSHIP

All equipment furnished hereunder must satisfactorily perform the function for which it is intended.

2. ORDER

Written orders, EDI orders (GSA Advantage! and FACNET), credit card orders, and orders placed under blanket purchase agreements (BPA) agreements shall be the basis for purchase in accordance with the provisions of this contract. If time of delivery extends beyond the expiration date of the contract, the

Contractor will be obligated to meet the delivery and installation date specified in the original order.

For credit card orders and BPAs, telephone orders are permissible.

3. TRANSPORTATION OF EQUIPMENT

FOB DESTINATION. Prices cover equipment delivery to destination, for any location within the geographic scope of this contract.

4. INSTALLATION AND TECHNICAL SERVICES

a. INSTALLATION. When the equipment provided under this contract is not normally self-installable, the Contractor's technical personnel shall be available to the ordering activity, at the ordering activity's location, to install the equipment and to train ordering activity personnel in the use and maintenance of the equipment. The charges, if any, for such services are listed below, or in the price schedule:

b. INSTALLATION, DEINSTALLATION, REINSTALLATION. The Davis-Bacon Act (40 U.S.C.

276a-276a-7) provides that contracts in excess of $2,000 to which the United States or the District of Columbia is a party for construction, alteration, or repair (including painting and decorating) of public buildings or public works with the United States, shall contain a clause that no laborer or mechanic employed directly upon the site of the work shall receive less than the prevailing wage rates as determined by the Secretary of Labor. The requirements of the Davis-Bacon Act do not apply if the construction work is incidental to the furnishing of supplies, equipment, or services.

For example, the requirements do not apply to simple installation or alteration of a public building or public work that is incidental to furnishing supplies or equipment under a supply contract.

However, if the construction, alteration or repair is segregable and exceeds $2,000, then the requirements of the Davis-Bacon Act apply.

The ordering activity issuing the task order against this contract will be responsible for proper administration and enforcement of the Federal labor standards covered by the Davis-Bacon Act.

The proper Davis-Bacon wage determination will be issued by the ordering activity at the time a request for quotations is made for applicable construction classified installation, deinstallation, and reinstallation services under SIN 132-8 or SIN 132-9.

c. OPERATING AND MAINTENANCE MANUALS. The Contractor shall furnish the ordering activity with one (1) copy of all operating and maintenance manuals which are normally provided with the equipment being purchased.

5. INSPECTION/ACCEPTANCE

NCS Technologies, Inc. GS-35F-4677G Page 12

The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The ordering activity reserves the right to inspect or test any equipment that has been tendered for acceptance. The ordering activity may require repair or replacement of nonconforming equipment at no increase in contract price. The ordering activity must exercise its post-acceptance rights (1) within a reasonable time after the defect was discovered or should have been discovered; and (2) before any substantial change occurs in the condition of the item, unless the change is due to the defect in the item.

6. WARRANTY

a. Unless specified otherwise in this contract, the Contractor’s standard commercial warranty as stated in the contract’s commercial pricelist will apply to this contract.

NOTE: Please refer to the pricelist for the description of the warranty for each item.

b. The Contractor warrants and implies that the items delivered hereunder are merchantable and fit for use for the particular purpose described in this contract.

c. Limitation of Liability. Except as otherwise provided by an express or implied warranty, the

Contractor will not be liable to the ordering activity for consequential damages resulting from any defect or deficiencies in accepted items.

d. If inspection and repair of defective equipment under this warranty will be performed at the

Contractor's plant, the address is as follows:

7. PURCHASE PRICE FOR ORDERED EQUIPMENT

The purchase price that the ordering activity will be charged will be the ordering activity purchase price in effect at the time of order placement, or the ordering activity purchase price in effect on the installation date

(or delivery date when installation is not applicable), whichever is less.

8. RESPONSIBILITIES OF THE CONTRACTOR

The Contractor shall comply with all laws, ordinances, and regulations (Federal, State, City or otherwise) covering work of this character, and shall include all costs, if any, of such compliance in the prices quoted in this offer.

9. TRADE-IN OF INFORMATION TECHNOLOGY EQUIPMENT

When an ordering activity determines that Information Technology equipment will be replaced, the ordering activity shall follow the contracting policies and procedures in the Federal Acquisition Regulation (FAR), the policies and procedures regarding disposition of information technology excess personal property in the

Federal Property Management Regulations (FPMR) (41 CFR 101-43.6), and the policies and procedures on exchange/sale contained in the FPMR (41 CFR part 101-46).

NCS Technologies, Inc. GS-35F-4677G Page 13

TERMS AND CONDITIONS APPLICABLE TO PERPETUAL SOFTWARE LICENSES

(SPECIAL ITEM NUMBER 132-33)

1. INSPECTION/ACCEPTANCE

The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The

Government reserves the right to inspect or test any software that has been tendered for acceptance. The Government may require repair or replacement of nonconforming software at no increase in contract price. The Government must exercise its post acceptance rights (1) within a reasonable time after the defect was discovered or should have been discovered; and (2) before any substantial change occurs in the condition of the software, unless the change is due to the defect in the software.

2. GUARANTEE/WARRANTY

a. Unless specified otherwise in this contract, the Contractor’s standard commercial guarantee/warranty as stated in the contract’s commercial pricelist will apply to this contract.

NOTE: Please refer to the pricelist for the description of the warranty for each item.

b. The Contractor warrants and implies that the items delivered hereunder are merchantable and fit for use for the particular purpose described in this contract.

c. Limitation of Liability. Except as otherwise provided by an express or implied warranty, the

Contractor will not be liable to the Government for consequential damages resulting from any defect or deficiencies in accepted items.

3. TECHNICAL SERVICES

The Contractor, without additional charge to the ordering activity, shall provide a hot line technical support number for the purpose of providing user assistance and guidance in the implementation of the software. The technical support number, 1-888-746-4627, is available from 8:30 to 5pm EST. Technical support can also be obtained from the contractor website at www.ncst.com.

4. UTILIZATION LIMITATIONS - (132-33)

a. Software acquisition is limited to commercial computer software defined to be:

COMMERCIAL COMPUTER SOFTWARE - Computer software which is used regularly for other than

Government purposes and is sold, licensed or leased in significant quantities to the general public at established catalog prices.

b. When acquired by the Government, commercial computer software and related documentation so legend shall be subject to the following:

(1) Title to and ownership of the software and documentation shall remain with the Contractor, unless otherwise specified.

(2) Software licenses are by site and by agency. An agency is defined as a cabinet level or independent agency. The software may be used by any subdivision of the agency (service, bureau, division, http://www.ncst.com/

NCS Technologies, Inc. GS-35F-4677G Page 14 command, etc.) that has access to the site the software is placed at, even if the subdivision did not participate in the acquisition of the software. Further, the software may be used on a sharing basis where multiple agencies have joint projects that can be satisfied by the use of the software placed at one agency's site. This would allow other agencies access to one agency's database. For

Government public domain databases, user agencies and third parties may use the computer program to enter, retrieve, analyze and present data. The user agency will take appropriate action by instruction, agreement, or otherwise, to protect the Contractor's proprietary property with any third parties that are permitted access to the computer programs and documentation in connection with the user agency's permitted use of the computer programs and documentation. For purposes of this section, all such permitted third parties shall be deemed agents of the user agency.

(3) Except as is provided in paragraph 8.b(2) above, the Government shall not provide or otherwise make available the software or documentation, or any portion thereof, in any form, to any third party without the prior written approval of the Contractor. Third parties do not include prime

Contractors, subcontractors and agents of the government who have the Government's permission to use the licensed software and documentation at the facility, and who have agreed to use the licensed software and documentation only in accordance with these restrictions. This provision does not limit the right of the Government to use software, documentation, or information therein, which the Government may already have or obtains without restrictions.

(4) The Government shall have the right to use the computer software and documentation with the computer for which it is acquired at any other facility to which that computer may be transferred, or in cases of disaster recovery, the Government has the right to transfer the software to another site if the Government site for which it is acquired is deemed to be unsafe for Government personnel; to use the computer software and documentation with a backup computer when the primary computer is inoperative; to copy computer programs for safekeeping (archives) or backup purposes; to transfer a copy of the software to another site for purposes of benchmarking new hardware and/or software; and to modify the software and documentation or combine it with other software, provided that the unmodified portions shall remain subject to these restrictions.

(5) "Commercial Computer Software" may be marked with the Contractor's standard commercial restricted rights legend, but the schedule contract and schedule pricelist, including this clause, "Utilization Limitations" are the only governing terms and conditions, and shall take precedence and supersede any different or additional terms and conditions included in the standard commercial legend.

5. SOFTWARE CONVERSIONS - (132-33)

Full monetary credit will be allowed to the Government when conversion from one version of the software to another is made as the result of a change in operating system, or from one computer system to another. Under a perpetual license (132-33), the purchase price of the new software shall be reduced by the amount that was paid to purchase the earlier version.

6. DESCRIPTIONS AND EQUIPMENT COMPATIBILITY

The Contractor shall include, in the schedule pricelist, a complete description of each software product and a list of equipment on which the software can be used. Also, included shall be a brief, introductory explanation of the modules and documentation which are offered.

7. RIGHT-TO-COPY PRICING

The Contractor shall insert the discounted pricing for right-to-copy licenses

NCS Technologies, Inc. GS-35F-4677G Page 15

TERMS AND CONDITIONS APPLICABLE TO INFORMATION TECHNOLOGY (IT)

PROFESSIONAL SERVICES (SPECIAL ITEM NUMBER 132-51)

1. SCOPE

a. The prices, terms and conditions stated under Special Item Number 132-51 Information Technology

Professional Services apply exclusively to IT Professional Services within the scope of this Information

Technology Schedule.

b. The Contractor shall provide services at the Contractor’s facility and/or at the ordering activity location, as agreed to by the Contractor and the ordering activity.

2. ORDERING PROCEDURES

a. Procedures for IT professional services priced on GSA schedule at hourly rates.

(1) FAR 8.402 contemplates that GSA may occasionally find it necessary to establish special ordering procedures for individual Federal Supply Schedules or for some Special Item Numbers (SINs) within a

Schedule. GSA has established special ordering procedures for IT professional services (SIN 132-51) that are priced on schedule at hourly rates. These special ordering procedures which are outlined herein take precedence over the procedures in FAR 8.404.

(2) The GSA has determined that the rates for IT professional services contained in this pricelist are fair and reasonable. However, the ordering office using this contract is responsible for considering the level of effort and mix of labor proposed to perform a specific task being ordered and for making a determination that the total firm-fixed price or ceiling price is fair and reasonable.

(3) When ordering IT professional services ordering offices shall –

(i) Prepare a Request for Quotation:

(A) A performance-based statement of work that outlines, at a minimum, the work to be performed, location of work, period of performance, deliverable schedule, applicable standards, acceptance criteria, and any special requirements (i.e., security clearances, travel, special knowledge, etc.) should be prepared.

(B) A request for quotation should be prepared which includes the performance-based statement of work and requests the contractors submit either a firm-fixed price or a ceiling price to provide the services outlined in the statement of work. A firm-fixed price order shall be requested, unless the ordering office makes a determination that it is not possible at the time of placing the order to estimate accurately the extent or duration of the work or to anticipate cost with any reasonable degree of confidence. When such a determination is made, a labor hour or time-and-materials proposal may be requested. The firm-fixed price shall be based on the hourly rates in the schedule contract and shall consider the mix of labor categories and level of effort required to perform the services described in the statement of work. The firm-fixed price of the order should also include any travel costs or other incidental costs related to performance of the services ordered, unless the order

NCS Technologies, Inc. GS-35F-4677G Page 16 provides for reimbursement of travel costs at the rates provided in the Federal Travel or

Joint Travel Regulations. A ceiling price must be established for labor hour and time and material orders.

(C) The request for quotation may request the contractors, if necessary or appropriate, submit a project plan for performing the task and information on the contractor’s experience and/or past performance performing similar tasks.

(D) The request for quotation shall notify the contractors what basis will be used for selecting the contractor to receive the order. The notice shall include the basis for determining whether the contractors are technically qualified and provide an explanation regarding the intended use of any experience and/or past performance information in determining technical acceptability of responses. If consideration will be limited to schedule contractors who are small business concerns as permitted by paragraph (ii)(A) below, the request for quotations shall notify the contractors that will be the case.

(ii) Transmit the Request for quotation to Contractors:

(A) Based upon an initial evaluation of catalogs and pricelists, the ordering office should identify the contractors that appear to offer the best value (considering the scope of services offered, hourly rates and other factors such as contractors’ locations, as appropriate). When buying IT professional services under SIN 132-51 ONLY, the ordering office, at its discretion, may limit consideration to those schedule contractors that are small business concerns. This limitation is not applicable when buying supplies and/or services under other SINs as well as SIN 132-51. The limitation may only be used when at least three (3) small businesses that appear to offer services that will meet the agency’s needs are available, if the order is estimated to exceed the micro-purchase threshold.

(B) The request for quotation should be to three (3) contractors if the proposed order is estimated to exceed the micro-purchase threshold, but not to exceed the maximum order threshold. For proposed orders exceeding the maximum order threshold, the request for quotation should be provided to additional contractors that offer services that will meet the agency’s needs. Ordering offices should strive to minimize the contractors’ costs associated with responding to requests for proposals for specific orders. Requests should be tailored to the minimum level necessary for adequate evaluation and selection for order placement.

(iii) Evaluate proposals and select the contractor to receive the order:

After responses have been evaluated against the factors identified in the request for quotation, the order should be placed with the schedule contractor that represents the best value and results in the lowest overall cost alternative (considering price, special qualifications, administrative costs, etc.) to meet the Government’s needs.

(6) The establishment of Federal Supply Schedule Blanket Purchase Agreements (BPAs) for recurring services is permitted when the procedures outlined herein are followed. All BPAs for services must define the services that may be ordered under the BPA, along with delivery or performance time frames, billing procedures, etc. The potential volume of orders under BPAs, regardless of the size

NCS Technologies, Inc. GS-35F-4677G Page 17 of individual orders, may offer the ordering office the opportunity to secure volume discounts.

When establishing BPAs ordering offices shall –

(i) Inform contractors in the request for quotation (based on the agency’s requirement) if a single BPA or multiple BPAs will be established, and indicate the basis that will be used for selecting the contractors to be awarded the BPAs.

(A) SINGLE BPA: Generally, a single BPA should be established when the ordering office can define the tasks to be ordered under the BPA and establish a firm-fixed price or ceiling price for individual tasks or services to be ordered. When this occurs, authorized users may place the order directly under the established BPA when the need for service arises. The schedule contractor that represents the best value and results in the lowest overall cost alternative to meet the agency's needs should be awarded the BPA.

(B) MULTIPLE BPAs: When the ordering office determines multiple BPAs are needed to meet its requirements, the ordering office should determine which contractors can meet any technical qualifications before establishing the BPAs. When multiple BPAs are established, the authorized users must follow the procedure in (3)(ii)(B) above, and then place the order with the schedule contractor that represents the best value and results in the lowest overall cost alternative to meet the agency’s needs.

(ii) Review BPAs periodically. Such reviews shall be conducted at least annually. The purpose of the review is to determine whether the BPA still represents the best value (considering price, special qualifications, etc.) and results in the lowest overall cost alternative to meet the agency’s needs.

(5) The ordering office should give preference to small business concerns when two or more contractors can provide the services at the same firm-fixed price or ceiling price.

(6) When the ordering office’s requirement involves both products as well as IT professional services, the ordering office should total the prices for the products and the firm-fixed price for the services and select the contractor that represents the greatest value in terms of meeting the agency’s total needs.

(7) The ordering office, at a minimum, should document orders by identifying the contractor the services were purchased from, the services purchased, and the amount paid. If other than a firm-fixed price order is placed, such documentation should include the basis for the determination to use a labor-hour or time-and-materials order. For agency requirements in excess of the micro-purchase threshold, the order file should document the evaluation of schedule contractors’ proposals that formed the basis for the selection of the contractor that received the order and the rationale for any trade-offs made in making the selection.

b. Ordering Procedures for other services available on schedule at fixed prices for specifically defined services or tasks.

Orders placed pursuant to a Multiple Award Schedule (MAS), using the procedures in FAR 8.404, are considered to be issued pursuant to full and open competition. Therefore, when placing orders under

Federal Supply Schedules, ordering offices need not seek further competition, synopsize the requirement, NCS Technologies, Inc. GS-35F-4677G Page 18 make a separate determination of fair and reasonable pricing, or consider small business set-asides in accordance with subpart 19.5. GSA has already determined the prices of items under schedule contracts to be fair and reasonable. By placing an order against a schedule using the procedures outlined below, the ordering office has concluded that the order represents the best value and results in the lowest overall cost alternative (considering price, special features, administrative costs, etc.) to meet the Government’s needs.

(1) Orders placed at or below the micro-purchase threshold. Ordering offices can place orders at or below the micro-purchase threshold with any Federal Supply Schedule Contractor.

(2) Orders exceeding the micro-purchase threshold but not exceeding the maximum order threshold.

Orders should be placed with the Schedule Contractor that can provide the supply or service that represents the best value. Before placing an order, ordering offices should consider reasonably available information about the service offered under MAS contracts by using the “GSA Advantage!” on-line shopping service, or by reviewing the catalogs/pricelists of at least three Schedule Contractors and selecting the delivery and other options available under the schedule that meets the agency’s needs. In selecting the service representing the best value, the ordering office may consider— (i) special features of the service that are required in effective program performance and that are not provided by a comparable service; and (ii) past performance.

(3) Orders exceeding the maximum order threshold. Each schedule contract has an established maximum order threshold. This threshold represents the point where it is advantageous for the ordering office to seek a price reduction. In addition to following the procedures in paragraph b, above, and before placing an order that exceeds the maximum order threshold, ordering offices shall--

(i) Review additional Schedule Contractors’ catalogs/pricelists or use the “GSA Advantage!”

on-line shopping service;

(ii) Based upon the initial evaluation, generally seek price reductions from the Schedule

Contractor(s) appearing to provide the best value (considering price and other factors); and

(iii) After price reductions have been sought, place the order with the Schedule Contractor that provides the best value and results in the lowest overall cost alternative. If further price reductions are not offered, an order may still be placed, if the ordering office determines that it is appropriate.

NOTE: For orders exceeding the maximum order threshold, the Contractor may:

(A) Offer a new lower price…