Federal Supply Schedule GS35F4581G

American Systems Corporation GS-35F-4581G Page 1 703.968.6300

AUTHORIZED FEDERAL SUPPLY SERVICE

INFORMATION TECHNOLOGY SCHEDULE PRICELIST

GENERAL PURPOSE COMMERCIAL INFORMATION TECHNOLOGY

EQUIPMENT, SOFTWARE AND SERVICES

Note: American Systems Corporation wishes to participate under the cooperative purchasing and disaster recovery purchasing programs. The following SINs are available to state and local: 132-51.

SIN 132-51 - INFORMATION TECHNOLOGY (IT) PROFESSIONAL SERVICES

FPDS Code D301 IT Facility Operation and Maintenance FPDS Code D302 IT Systems Development Services FPDS Code D306 IT Systems Analysis Services FPDS Code D307 Automated Information Systems Design and Integration Services FPDS Code D308 Programming Services FPDS Code D310 IT Backup and Security Services FPDS Code D311 IT Data Conversion Services FPDS Code D313 Computer Aided Design/Computer Aided Manufacturing (CAD/CAM) Services FPDS Code D316 IT Network Management Services FPDS Code D417 Creation/Retrieval of IT Related Automated News Services, Data Services, or other Information

Services FPDS Code D399 Other Information Technology Services, Not Elsewhere Classified

SIN 132-62 – HOMELAND SECURITY PRESIDENTIAL DIRECTIVE (HSPD-12) PRODUCT AND SERVICE COMPONENTS

American Systems Corporation 14151 Park Meadow Drive, Suite 500

Chantilly, VA 20151 Phone: 703.968.6300

Fax: 703.968.5151 www.americansystems.com

Contract Number: GS-35F-4581G

DUNS: 07-779-9799

Period Covered by Contract: June 28, 1997 to June 27, 2017

General Services Administration, Federal Supply Service

Pricelist current through Modification # PS-0028, dated September 17, 2014.

Products and ordering information in this Authorized FSS Information Technology Schedule Pricelist are also available on the GSA Advantage! System. http://gsaadvantage.gov

American Systems Corporation GS-35F-4581G Page 2

TABLE OF CONTENTS

INFORMATION FOR ORDERING ACTIVITIES APPLICABLE TO ALL SPECIAL ITEM NUMBERS

GENERAL TERMS AND CONDITIONS APPLICABLE TO INFORMATION TECHNOLOGY (IT) PROFESSIONAL

SERVICES (SPECIAL ITEM NUMBER 132-51)

AMERICAN SYSTEMS TERMS AND CONDITIONS APPLICABLE TO INFORMATION TECHNOLOGY (IT)

PROFESSIONAL SERVICES (SPECIAL ITEM NUMBER 132-51)

TERMS AND CONDITIONS APPLICABLE TO AUTHENTICATION SERVICES (HSPD-12) (SPECIAL ITEM NUMBER 132-62)

AMERICAN SYSTEMS CORPORATE OVERVIEW

AMERICAN SYSTEMS IT PROFESSIONAL SERVICE AREAS

AMERICAN SYSTEMS’ AWARDED LABOR CATEGORY DESCRIPTIONS

AMERICAN SYSTEMS’ AWARDED LABOR RATES

American Systems Corporation GS-35F-4581G Page 3

INFORMATION FOR ORDERING ACTIVITIES

APPLICABLE TO ALL SPECIAL ITEM NUMBERS

SPECIAL NOTICE TO AGENCIES: Small Business Participation

SBA strongly supports the participation of small business concerns in the Federal Supply Schedules Program. To enhance Small Business Participation SBA policy allows agencies to include in their procurement base and goals, the dollar value of orders expected to be placed against the Federal Supply Schedules, and to report accomplishments against these goals.

For orders exceeding the micropurchase threshold, FAR 8.404 requires agencies to consider the catalogs/pricelists of at least three schedule contractors or consider reasonably available information by using the GSA Advantage! on-line shopping service (www.fss.gsa.gov). The catalogs/pricelists, GSA Advantage! and the Federal Supply Service Home Page (www.fss.gsa.gov) contain information on a broad array of products and services offered by small business concerns.

This information should be used as a tool to assist ordering activities in meeting or exceeding established small business goals. It should also be used as a tool to assist in including small, small disadvantaged, and women-owned small businesses among those considered when selecting pricelists for a best value determination.

For orders exceeding the micropurchase threshold, customers are to give preference to small business concerns when two or more items at the same delivered price will satisfy their requirement.

1. GEOGRAPHIC SCOPE OF CONTRACT

Domestic delivery is delivery within the 48 contiguous states, Alaska, Hawaii, Puerto Rico, Washington, DC, and U.S.

Territories. Domestic delivery also includes a port or consolidation point, within the aforementioned areas, for orders received from overseas activities.

Overseas delivery is delivery to points outside of the 48 contiguous states, Washington, DC, Alaska, Hawaii, Puerto Rico, and U.S. Territories.

[X] The Geographic Scope of Contract will be Worldwide (Outside the continguous 48 states; Washington, DC;

Alaska, Hawaii, Puerto Rice and US Terrorities)

2. CONTRACTOR'S ORDERING ADDRESS AND PAYMENT INFORMATION:

AMERICAN SYSTEMS

14151 Park Meadow Drive, Suite 500 Chantilly, VA 20151-2272

Contractors are required to accept credit cards for payments equal to or less than the micro-purchase threshold for oral or written delivery orders. Credit cards will be acceptable for payment above the micro-purchase threshold. In addition, bank account information for wire transfer payments will be shown on the invoice.

The following telephone number(s) can be used by ordering activities to obtain technical and/or ordering assistance:

Mr. Joseph Kopfman Vice President, Contracts 703-968-5226 or 1-800-733-2721 Joseph.Kopfman@AmericanSystems.com

Ms. Diane Stegner Director, Pricing 703-968-5210 or 1-800-733-2721 Diane.Stegner@AmericanSystems.com

American Systems Corporation GS-35F-4581G Page 4

3. LIABILITY FOR INJURY OR DAMAGE

The Contractor shall not be liable for any injury to ordering activity personnel or damage to ordering activity property arising from the use of equipment maintained by the Contractor, unless such injury or damage is due to the fault or negligence of the Contractor.

4. STATISTICAL DATA FOR GOVERNMENT ORDERING OFFICE COMPLETION OF STANDARD FORM 279:

Block 9: G. Order/Modification Under Federal Schedule Block 16: Data Universal Numbering System (DUNS) Number: 07-779-9799 Block 30: Type of Contractor - C. Large Business Block 31: Woman-Owned Small Business – NO Block 36: Contractor's Taxpayer Identification Number (TIN): 54-0962497 4a. CAGE Code: 61443 4b. Contractor has registered with the Central Contractor Registration Database.

5. FOB DESTINATION

6. DELIVERY SCHEDULE

a. TIME OF DELIVERY: The Contractor shall deliver to destination within the number of calendar days after receipt of order (ARO), as set forth below:

Special Item Number Delivery Time (Days ARO)

132-51 & 132-62 * *Delivery to be negotiated between Contractor and Ordering Activity

b. URGENT REQUIREMENTS: When the Federal Supply Schedule contract delivery period does not meet the bona fide urgent delivery requirements of an ordering activity, ordering activities are encouraged, if time permits, to contact the Contractor for the purpose of obtaining accelerated delivery. The Contractor shall reply to the inquiry within 3 workdays after receipt. (Telephonic replies shall be confirmed by the Contractor in writing.) If the Contractor offers an accelerated delivery time acceptable to the ordering activity, any order(s) placed pursuant to the agreed upon accelerated delivery time frame shall be delivered within this shorter delivery time and in accordance with all other terms and conditions of the contract.

* Expedited delivery to be negotiated between Contractor and Ordering Activity

7. DISCOUNTS:

Prices shown are NET prices. Basic Discounts have been deducted.

a. Prompt Payment: 0% - 30 days from receipt of invoice or date of acceptance, whichever is later.

b. Quantity: NONE

c. Dollar Volume: NONE

d. Government Educational Institutions are offered the same discounts as all other Government customers.

e. Other: NONE

American Systems Corporation GS-35F-4581G Page 5

8. TRADE AGREEMENTS ACT OF 1979, AS AMENDED:

All items are U.S. made end products, designated country end products, Caribbean Basin country end products, Canadian end products, or Mexican end products as defined in the Trade Agreements Act of 1979, as amended.

9. STATEMENT CONCERNING AVAILABILITY OF EXPORT PACKING:

Export Packing is not available on this contract.

10. SMALL REQUIREMENTS:

The minimum dollar value of orders to be issued is $1,000 for all vendors.

11. MAXIMUM ORDER

Maximum Order (All dollar amounts are exclusive of any discount for prompt payment).

a. The Maximum Order value for the following Special Item Numbers (SINs) is $500,000:

Special Item Number 132-51 - Information Technology (IT) Professional Services

b. The Maximum Order value for the following Special Item Numbers (SINs) is $1,000,000:

Special Item Number 132-62 – HSPD-12 Products and Services

12. ORDERING PROCEDURES FOR FEDERAL SUPPLY SCHEDULE CONTRACTS

Ordering activities shall use the ordering procedures of Federal Acquisition Regulation (FAR) 8.405 when placing an order or establishing a BPA for supplies or services. These procedures apply to all schedules.

a. FAR 8.405-1 Ordering procedures for supplies, and services not requiring a statement of work.

b. FAR 8.405-2 Ordering procedures for services requiring a statement of work.

13. FEDERAL INFORMATION TECHNOLOGY/TELECOMMUNICATION STANDARDS REQUIREMENTS:

Ordering activities acquiring products from this Schedule must comply with the provisions of the Federal Standards Program, as appropriate (reference: NIST Federal Standards Index). Inquiries to determine whether or not specific products listed herein comply with Federal Information Processing Standards (FIPS) or Federal Telecommunication Standards (FED-STDS), which are cited by ordering activities, shall be responded to promptly by the Contractor.

13.1 FEDERAL INFORMATION PROCESSING STANDARDS PUBLICATIONS (FIPS PUBS):

Information Technology products under this Schedule that do not conform to Federal Information Processing Standards (FIPS) should not be acquired unless a waiver has been granted in accordance with the applicable "FIPS Publication."

Federal Information Processing Standards Publications (FIPS PUBS) are issued by the U.S. Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security Act. Information concerning their availability and applicability should be obtained from the National Technical Information Service (NTIS), 5285 Port Royal Road, Springfield, Virginia 22161. FIPS PUBS include voluntary standards when these are adopted for Federal use.

Individual orders for FIPS PUBS should be referred to the NTIS Sales Office, and orders for subscription service should be referred to the NTIS Subscription Officer, both at the above address, or telephone number (703) 487-4650.

13.2 FEDERAL TELECOMMUNICATION STANDARDS (FED-STDS):

Telecommunication products under this Schedule that do not conform to Federal Telecommunication Standards (FED- STDS) should not be acquired unless a waiver has been granted in accordance with the applicable "FED-STD."

Federal Telecommunication Standards are issued by the U.S. Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security Act. Ordering information and information concerning the availability of FED-STDS should be obtained from the GSA, Federal Supply Service, Specification Section, 470 East L’Enfant Plaza, Suite 8100, SW, Washington, DC 20407, (202)619-8925. Please include a self-addressed mailing label when requesting information by mail. Information concerning their applicability can be obtained by writing or calling the U.S. Department of Commerce, National Institute of Standards and Technology, Gaithersburg, MD 20899, (301)975- 2833.

American Systems Corporation GS-35F-4581G Page 6

14. CONTRACTOR TASKS / SPECIAL REQUIREMENTS (C-FSS-370) (NOV 2001)

(a) Security Clearances: The Contractor may be required to obtain/possess varying levels of security clearances in the performance of orders issued under this contract. All costs associated with obtaining/possessing such security clearances should be factored into the price offered under the Multiple Award Schedule.

(b) Travel: The Contractor may be required to travel in performance of orders issued under this contract. Allowable travel and per diem charges are governed by Pub .L. 99-234 and FAR Part 31, and are reimbursable by the ordering agency or can be priced as a fixed price item on orders placed under the Multiple Award Schedule. The Industrial Funding Fee does NOT apply to travel and per diem charges.

NOTE: Refer to FAR Part 31.205-46 Travel Costs, for allowable costs that pertain to official company business travel in regards to this contract.

(c) Certifications, Licenses and Accreditations: As a commercial practice, the Contractor may be required to obtain/possess any variety of certifications, licenses and accreditations for specific FSC/service code classifications offered. All costs associated with obtaining/ possessing such certifications, licenses and accreditations should be factored into the price offered under the Multiple Award Schedule program.

(d) Insurance: As a commercial practice, the Contractor may be required to obtain/possess insurance coverage for specific FSC/service code classifications offered. All costs associated with obtaining/possessing such insurance should be factored into the price offered under the Multiple Award Schedule program.

(e) Personnel: The Contractor may be required to provide key personnel, resumes or skill category descriptions in the performance of orders issued under this contract. Ordering activities may require agency approval of additions or replacements to key personnel.

(f) Organizational Conflicts of Interest: Where there may be an organizational conflict of interest as determined by the ordering agency, the Contractor’s participation in such order may be restricted in accordance with FAR Part 9.5.

(g) Documentation/Standards: The Contractor may be requested to provide products or services in accordance with rules, regulations, OMB orders, standards and documentation as specified by the agency’s order.

(h) Data/Deliverable Requirements: Any required data/deliverables at the ordering level will be as specified or negotiated in the agency’s order.

(i) Government-Furnished Property: As specified by the agency’s order, the Government may provide property, equipment, materials or resources as necessary.

(j) Availability of Funds: Many Government agencies’ operating funds are appropriated for a specific fiscal year.

Funds may not be presently available for any orders placed under the contract or any option year. The Government’s obligation on orders placed under this contract is contingent upon the availability of appropriated funds from which payment for ordering purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are available to the ordering Contracting Officer.

15. CONTRACT ADMINISTRATION FOR ORDERING ACTIVITIES:

Any ordering activity, with respect to any one or more delivery orders placed by it under this contract, may exercise the same rights of termination as might the GSA Contracting Officer under provisions of FAR 52.212-4, paragraphs (l) Termination for the ordering activity’s convenience, and (m) Termination for Cause (See C.1.)

16. GSA ADVANTAGE!

GSA Advantage! is an on-line, interactive electronic information and ordering system that provides on-line access to vendors' schedule prices with ordering information. GSA Advantage! will allow the user to perform various searches across all contracts including, but not limited to:

(1) Manufacturer;

(2) Manufacturer's Part Number; and

(3) Product categories.

American Systems Corporation GS-35F-4581G Page 7

Agencies can browse GSA Advantage! by accessing the Internet World Wide Web utilizing a browser (ex.: NetScape).

The Internet address is http://www.fss.gsa.gov/.

17. PURCHASE OF OPEN MARKET ITEMS

NOTE: Open Market Items are also known as incidental items, noncontract items, non-Schedule items, and items not on a Federal Supply Schedule contract. ODCs (Other Direct Costs) are not part of this contract and should be treated as open market purchases. Ordering Activities procuring open market items must follow FAR 8.402(f).

For administrative convenience, an ordering activity contracting officer may add items not on the Federal Supply Multiple Award Schedule (MAS) -- referred to as open market items -- to a Federal Supply Schedule blanket purchase agreement (BPA) or an individual task or delivery order, only if-

(1) All applicable acquisition regulations pertaining to the purchase of the items not on the Federal Supply Schedule have been followed (e.g., publicizing (Part 5), competition requirements (Part 6), acquisition of commercial items (Part 12), contracting methods (Parts 13, 14, and 15), and small business programs (Part 19));

(2) The ordering activity contracting officer has determined the price for the items not on the Federal Supply Schedule is fair and reasonable;

(3) The items are clearly labeled on the order as items not on the Federal Supply Schedule; and

(4) All clauses applicable to items not on the Federal Supply Schedule are included in the order.

18. CONTRACTOR COMMITMENTS, WARRANTIES AND REPRESENTATIONS

a. For the purpose of this contract, commitments, warranties and representations include, in addition to those agreed to for the entire schedule contract:

(1) Time of delivery/installation quotations for individual orders;

(2) Technical representations and/or warranties of products concerning performance, total system performance and/or configuration, physical, design and/or functional characteristics and capabilities of a product/equipment/ service/software package submitted in response to requirements which result in orders under this schedule contract.

(3) Any representations and/or warranties concerning the products made in any literature, description, drawings and/or specifications furnished by the Contractor.

b. The above is not intended to encompass items not currently covered by the GSA Schedule contract.

19. OVERSEAS ACTIVITIES

The terms and conditions of this contract shall apply to all orders for installation, maintenance and repair of equipment in areas listed in the pricelist outside the 48 contiguous states and the District of Columbia, except as indicated below:

NONE

Upon request of the Contractor, the ordering activity may provide the Contractor with logistics support, as available, in accordance with all applicable ordering activity regulations. Such ordering activity support will be provided on a reimbursable basis, and will only be provided to the Contractor's technical personnel whose services are exclusively required for the fulfillment of the terms and conditions of this contract.

20. BLANKET PURCHASE AGREEMENTS (BPAs)

The use of BPAs under any schedule contract to fill repetitive needs for supplies or services is allowable. BPAs may be established with one or more schedule contractors. The number of BPAs to be established is within the discretion of the ordering activity establishing the BPA and should be based on a strategy that is expected to maximize the effectiveness of the BPA(s). Ordering activities shall follow FAR 8.405-3 when creating and implementing BPA(s).

21. CONTRACTOR TEAM ARRANGEMENTS

Contractors participating in contractor team arrangements must abide by all terms and conditions of their respective contracts. This includes compliance with Clauses 552.238-74, Industrial Funding Fee and Sales Reporting, i.e., each contractor (team member) must report sales and remit the IFF for all products and services provided under its individual contract.

22. INSTALLATION, DEINSTALLATION, REINSTALLATION

American Systems Corporation GS-35F-4581G Page 8

The Davis-Bacon Act (40 U.S.C. 276a-276a-7) provides that contracts in excess of $2,000 to which the United States or the District of Columbia is a party for construction, alteration, or repair (including painting and decorating) of public buildings or public works with the United States, shall contain a clause that no laborer or mechanic employed directly upon the site of the work shall received less than the prevailing wage rates as determined by the Secretary of Labor.

The requirements of the Davis-Bacon Act do not apply if the construction work is incidental to the furnishing of supplies, equipment, or services. For example, the requirements do not apply to simple installation or alteration of a public building or public work that is incidental to furnishing supplies or equipment under a supply contract. However, if the construction, alteration or repair is segregable and exceeds $2,000, then the requirements of the Davis-Bacon Act applies.

The ordering activity issuing the task order against this contract will be responsible for proper administration and enforcement of the Federal labor standards covered by the Davis-Bacon Act. The proper Davis-Bacon wage determination will be issued by the ordering activity at the time a request for quotations is made for applicable construction classified installation, deinstallation, and reinstallation services under SIN 132-8.

23. SECTION 508 COMPLIANCE

If applicable, Section 508 compliance information on the supplies and services in this contract are available in Electronic and Information Technology (EIT) at the following: www.americansystems.com The EIT standard can be found at: www.Section508.gov/.

24. PRIME CONTRACTOR ORDERING FROM FEDERAL SUPPLY SCHEDULES

Prime Contractors (on cost reimbursement contracts) placing orders under Federal Supply Schedules, on behalf of an ordering activity, shall follow the terms of the applicable schedule and authorization and include with each order –

(a) A copy of the authorization from the ordering activity with whom the contractor has the prime contract (unless a copy was previously furnished to the Federal Supply Schedule contractor); and

(b) The following statement:

This order is placed under written authorization from _______ dated _______. In the event of any inconsistency between the terms and conditions of this order and those of your Federal Supply Schedule contract, the latter will govern.

25. INSURANCE—WORK ON A GOVERNMENT INSTALLATION (JAN 1997)(FAR 52.228-5)

(a) The Contractor shall, at its own expense, provide and maintain during the entire performance of this contract, at least the kinds and minimum amounts of insurance required in the Schedule or elsewhere in the contract.

(b) Before commencing work under this contract, the Contractor shall notify the Contracting Officer in writing that the required insurance has been obtained. The policies evidencing required insurance shall contain an endorsement to the effect that any cancellation or any material change adversely affecting the Government's interest shall not be effective—

(1) For such period as the laws of the State in which this contract is to be performed prescribe; or

(2) Until 30 days after the insurer or the Contractor gives written notice to the Contracting Officer, whichever period is longer.

(c) The Contractor shall insert the substance of this clause, including this paragraph (c), in subcontracts under this contract that require work on a Government installation and shall require subcontractors to provide and maintain the insurance required in the Schedule or elsewhere in the contract. The Contractor shall maintain a copy of all subcontractors' proofs of required insurance, and shall make copies available to the Contracting Officer upon request.

26. SOFTWARE INTEROPERABILITY

Offerors are encouraged to identify within their software items any component interfaces that support open standard interoperability. An item’s interface may be identified as interoperable on the basis of participation in a Government agency-sponsored program or in an independent organization program. Interfaces may be identified by reference to an interface registered in the component registry located at http://www.core.gov.

American Systems Corporation GS-35F-4581G Page 9

27. ADVANCE PAYMENTS

A payment under this contract to provide a service or deliver an article for the United States Government may not be more than the value of the service already provided or the article already delivered. Advance or pre-payment is not authorized or allowed under this contract. (31 U.S.C. 3324)

American Systems Corporation GS-35F-4581G Page 10

GENERAL TERMS AND CONDITIONS APPLICABLE TO INFORMATION TECHNOLOGY (IT)

PROFESSIONAL SERVICES (SPECIAL ITEM NUMBER 132-51)

1. SCOPE

a. The prices, terms and conditions stated under Special Item Number 132-51 Information Technology Professional Services apply exclusively to IT Services within the scope of this Information Technology Schedule.

b. The Contractor shall provide services at the Contractor’s facility and/or at the ordering activity location, as agreed to by the Contractor and the ordering activity.

2. PERFORMANCE INCENTIVES

a. Performance incentives may be agreed upon between the Contractor and the ordering activity on individual fixed price orders or Blanket Purchase Agreements under this contract in accordance with this clause.

b. The ordering activity must establish a maximum performance incentive price for these services and/or total solutions on individual orders or Blanket Purchase Agreements.

c. Incentives should be designed to relate results achieved by the contractor to specified targets. To the maximum extent practicable, ordering activities shall consider establishing incentives where performance is critical to the ordering activity’s mission and incentives are likely to motivate the contractor. Incentives shall be based on objectively measurable tasks.

3. ORDER

a. Agencies may use written orders, EDI orders, blanket purchase agreements, individual purchase orders, or task orders for ordering services under this contract. Blanket Purchase Agreements shall not extend beyond the end of the contract period; all services and delivery shall be made and the contract terms and conditions shall continue in effect until the completion of the order. Orders for tasks which extend beyond the fiscal year for which funds are available shall include FAR 52.232-19 (Deviation – May 2003) Availability of Funds for the Next Fiscal Year. The purchase order shall specify the availability of funds and the period for which funds are available.

b. All task orders are subject to the terms and conditions of the contract. In the event of conflict between a task order and the contract, the contract will take precedence.

4. PERFORMANCE OF SERVICES

a. The Contractor shall commence performance of services on the date agreed to by the Contractor and the ordering activity.

b. The Contractor agrees to render services only during normal working hours, unless otherwise agreed to by the Contractor and the ordering activity.

c. The ordering activity should include the criteria for satisfactory completion for each task in the Statement of Work or Delivery Order. Services shall be completed in a good and workmanlike manner.

d. Any Contractor travel required in the performance of IT Services must comply with the Federal Travel Regulation or Joint Travel Regulations, as applicable, in effect on the date(s) the travel is performed.

Established Federal Government per diem rates will apply to all Contractor travel. Contractors cannot use GSA city pair contracts.

5. STOP-WORK ORDER (FAR 52.242-15) (AUG 1989)

a. The Contracting Officer may, at any time, by written order to the Contractor, require the Contractor to stop all, or any part, of the work called for by this contract for a period of 90 days after the order is delivered to the Contractor, and for any further period to which the parties may agree. The order shall be specifically identified as a stop-work order issued under this clause. Upon receipt of the order, the Contractor shall immediately comply with its terms and take all reasonable steps to minimize the incurrence of costs allocable to the work covered by the order during the period of work stoppage. Within a period of 90 days after a stop-work is

American Systems Corporation GS-35F-4581G Page 11 delivered to the Contractor, or within any extension of that period to which the parties shall have agreed, the Contracting Officer shall either-

(1) Cancel the stop-work order; or

(2) Terminate the work covered by the order as provided in the Default, or the Termination for Convenience of the Government, clause of this contract.

b. If a stop-work order issued under this clause is canceled or the period of the order or any extension thereof expires, the Contractor shall resume work. The Contracting Officer shall make an equitable adjustment in the delivery schedule or contract price, or both, and the contract shall be modified, in writing, accordingly, if-

(1) The stop-work order results in an increase in the time required for, or in the Contractor's cost properly allocable to, the performance of any part of this contract; and

(2) The Contractor asserts its right to the adjustment within 30 days after the end of the period of work stoppage; provided, that, if the Contracting Officer decides the facts justify the action, the Contracting Officer may receive and act upon the claim submitted at any time before final payment under this contract.

c. If a stop-work order is not canceled and the work covered by the order is terminated for the convenience of the Government, the Contracting Officer shall allow reasonable costs resulting from the stop-work order in arriving at the termination settlement.

d. If a stop-work order is not canceled and the work covered by the order is terminated for default, the Contracting Officer shall allow, by equitable adjustment or otherwise, reasonable costs resulting from the stop-work order.

6. INSPECTION OF SERVICES

The Inspection of Services–Fixed Price (AUG 1996) (Deviation – May 2003) clause at FAR 52.246-4 applies to firm-fixed price orders placed under this contract. The Inspection–Time-and-Materials and Labor-Hour (JAN 1986) (Deviation – May 2003) clause at FAR 52.246-6 applies to time-and-materials and labor-hour orders placed under this

7. RESPONSIBILITIES OF THE CONTRACTOR

The Contractor shall comply with all laws, ordinances, and regulations (Federal, State, City, or otherwise) covering work of this character. If the end product of a task order is software, then FAR 52.227-14 (Deviation – May 2003) Rights in Data – General, may apply.

8. RESPONSIBILITIES OF THE ORDERING ACTIVITY

Subject to security regulations, the ordering activity shall permit Contractor access to all facilities necessary to perform the requisite IT Services.

9. INDEPENDENT CONTRACTOR

All IT Services performed by the Contractor under the terms of this contract shall be as an independent Contractor, and not as an agent or employee of the ordering activity.

10. ORGANIZATIONAL CONFLICTS OF INTEREST

a. Definitions.

“Contractor” means the person, firm, unincorporated association, joint venture, partnership, or corporation that is a party to this contract.

“Contractor and its affiliates” and “Contractor or its affiliates” refers to the Contractor, its chief executives, directors, officers, subsidiaries, affiliates, subcontractors at any tier, and consultants and any joint venture involving the Contractor, any entity into or with which the Contractor subsequently merges or affiliates, or any other successor or assignee of the Contractor.

American Systems Corporation GS-35F-4581G Page 12

An “Organizational conflict of interest” exists when the nature of the work to be performed under a proposed ordering activity contract, without some restriction on ordering activities by the Contractor and its affiliates, may either (i) result in an unfair competitive advantage to the Contractor or its affiliates or (ii) impair the Contractor’s or its affiliates’ objectivity in performing contract work.

b. To avoid an organizational or financial conflict of interest and to avoid prejudicing the best interests of the ordering activity, ordering activities may place restrictions on the Contractors, its affiliates, chief executives, directors, subsidiaries and subcontractors at any tier when placing orders against schedule contracts. Such restrictions shall be consistent with FAR 9.505 and shall be designed to avoid, neutralize, or mitigate organizational conflicts of interest that might otherwise exist in situations related to individual orders placed against the schedule contract. Examples of situations, which may require restrictions, are provided at FAR 9.508.

11. INVOICES

The Contractor, upon completion of the work ordered, shall submit invoices for IT/EC services. Progress payments may be authorized by the ordering activity on individual orders if appropriate. Progress payments shall be based upon completion of defined milestones or interim products. Invoices shall be submitted monthly for recurring services performed during the preceding month.

12. PAYMENTS

For firm-fixed price orders the ordering activity shall pay the Contractor, upon submission of proper invoices or vouchers, the prices stipulated in this contract for service rendered and accepted. Progress payments shall be made only when authorized by the order. For time-and-materials orders, the Payments under Time-and-Materials and Labor-Hour Contracts at FAR 52.232-7 (DEC 2002), (Alternate II – Feb 2002) (Deviation – May 2003) applies to time-and-materials orders placed under this contract. For labor-hour orders, the Payment under Time-and-Materials and Labor-Hour Contracts at FAR 52.232-7 (DEC 2002), (Alternate II – Feb 2002) (Deviation – May 2003)) applies to labor-hour orders placed under this contract. 52.216-31(Feb 2007) Time-and-Materials/Labor-Hour Proposal Requirements—Commercial Item Acquisition. As prescribed in 16.601(e)(3), insert the following provision:

(a) The Government contemplates award of a Time-and-Materials or Labor-Hour type of contract resulting from this solicitation.

(b) The offeror must specify fixed hourly rates in its offer that include wages, overhead, general and administrative expenses, and profit. The offeror must specify whether the fixed hourly rate for each labor category applies to labor performed by—

(1) The offeror;

(2) Subcontractors; and/or

(3) Divisions, subsidiaries, or affiliates of the offeror under a common control.

13. RESUMES

Resumes shall be provided to the GSA Contracting Officer or the user ordering activity upon request.

14. INCIDENTAL SUPPORT COSTS

Incidental support costs are available outside the scope of this contract. The costs will be negotiated separately with the ordering activity in accordance with the guidelines set forth in the FAR.

15. APPROVAL OF SUBCONTRACTS

The ordering activity may require that the Contractor receive, from the ordering activity's Contracting Officer, written consent before placing any subcontract for furnishing any of the work called for in a task order.

16. DESCRIPTION OF IT SERVICES AND PRICING

Special Item Number (SIN) 132-51 – Professional Information Technology Services

American Systems Corporation GS-35F-4581G Page 13

IT SYSTEMS DEVELOPMENT SERVICES (FPDS Code D302)

Project Planning and Management

Strategic Planning for Technology Programs/Activities

Acquisition and Life Cycle Management

Concept Development and Requirements Definition

Technical Requests For Proposal (RFP) Development

Technical Staff Support

Requirements Management

Configuration Management

Risk Management

System Design, Engineering and Integration

Software Design, Engineering and Integration

Quality Assurance

Verification & Validation (V&V)

Independent Verification and Validation (IV&V)

Test Planning and Monitoring

Test and Evaluation

Integrated Logistics Support

COTS/GOTS Product Evaluation and Selection

Product Compliance Studies and Assessments

Training

IT SYSTEMS ANALYSIS SERVICES (FPDS Code D306)

System Analysis and Design

System Design/Specifications Support

IT Planning, Studies and Assessments

Facilities Support for IT Planning

Requirements Analysis

IT Architecture Analysis, Design and Evaluation

Performance Measurement Analysis

Product Reliability and Maintainability Studies

Quality Assurance

Verification & Validation (V&V)

Independent Verification and Validation (IV&V)

Technical Trade-off Studies and Market Surveys

System Safety

System Security

System Interface Analysis

Project Evaluation Staff Support

Earned Value Analysis Studies

Business Case Analysis

Training

Facilitation Support

Other Information Technology Services, Not Elsewhere Classified (FPDS Code D399)

Program Management

Project Office Staff Support

Risk Management

Requirements Management

Project Planning, Scheduling and Work Breakdown Structure (WBS)

Metrics Planning and Tracking

Earned Value Management

Configuration Management

Quality Management

Program Risk Assessments

Performance Measurement Analysis

Technical Group Facilitation

Project Management Education and Training Services

Test Management

Independent Assessments (Organizational, Technical and Managerial)

IT Strategic Planning

American Systems Corporation GS-35F-4581G Page 14

AMERICAN SYSTEMS TERMS AND CONDITIONS

APPLICABLE TO IT PROFESSIONAL SERVICES (SPECIAL ITEM NUMBER 132-51)

1. ORDER

Agencies may use written orders, EDI orders, credit card orders, blanket purchase orders, individual purchase orders, or task orders for ordering services under this contract. Blanket Purchase Orders shall not extend beyond the end of the contract period.

2. TYPE OF CONTRACT

Orders for services may be in the form of Firm-fixed Price task orders or Time and Material (T&M) task orders with fixed labor hours as delineated in our price proposal.

3. ORDERING PROCEDURES AND PROCESS

The ordering activity should provide AMERICAN SYSTEMS with a detailed Statement of Work (SOW) and request for cost estimate. The SOW should clearly indicate the following:

A description of the specific work required.

Period of performance.

Deliverables.

Acceptance criteria.

Any other pertinent information.

AMERICAN SYSTEMS shall, within a mutually agreed upon time, typically ten working days, provide the ordering officer with a price estimate based upon the established rates contained in the schedule. The price estimate may include the following:

The total hours and price for labor.

Overtime hours for any nonexempt labor categories identified in paragraph F, if required and authorized.

Proposed completion or delivery date.

Milestone requirements for invoicing under fixed price orders.

Local and long distance travel costs (including travel, lodging, per diem and other incidentals).

Total order price.

4. HOURS

Services are normally performed during the customer’s normal prime shift working hours when services are performed at the customer site. Labor rates are based on an eight-hour work day, forty-hour work week, Monday through Friday, excluding Government holidays.

5. LOCAL TRAVEL CHARGES

For assignments of any duration within a 50-mile radius of an AMERICAN SYSTEMS office, mileage to and from the work site will be reimbursed at the current Federally approved mileage rate. Local travel charges also include parking fees, tolls and other related expenses.

6. LONG DISTANCE TRAVEL CHARGES

For travel outside the local travel area, long distance travel costs (travel, lodging, per diem, and other incidentals) will be reimbursed in accordance with the Joint Travel Regulations (JTR) guidelines in effect at the time the travel occurs.

American Systems Corporation GS-35F-4581G Page 15

7. TRAVEL TIME

Travel time spent by AMERICAN SYSTEMS personnel in transit to a work location beyond a 50-mile radius of the AMERICAN SYSTEMS office is considered billable hours. For exempt employees this is not to exceed eight hours per day to or from the work location. For non-exempt employees the billable hours will be the actual hours in transit.

AMERICAN SYSTEMS agrees to use the most reasonable means of transportation in such cases.

8. SERVICES PERFORMED AT GOVERNMENT LOCATIONS

For services performed at Government locations, AMERICAN SYSTEMS assumes that the Government is willing to furnish appropriate work areas, storage space, parking, permits, and access to copiers, telephones, and workstations as may be required.

9. INVOICES AND PAYMENT

Invoices for IT Professional Services shall be submitted by the contractor as soon as possible after completion of the work. Payment under blanket purchase orders will be made quarterly or monthly, except where cash payment procedures are used. Invoices shall be submitted separately to each ordering activity ordering services under the contract. PROMPT PAYMENT DISCOUNT, IF APPLICABLE, SHALL BE SHOWN ON THE INVOICE.

For T&M orders with a period of performance exceeding thirty (30) days, AMERICAN SYSTEMS will invoice monthly for hours worked the previous month. For Fixed Price orders, AMERICAN SYSTEMS will invoice monthly or upon the completion of agreed upon milestone(s).

10. PERSONNEL SECURITY REQUIREMENTS

Requirements which specify the use of contractor personnel with unique and/or high level security clearances (i.e., top secret, special accesses, life style polygraph, etc.) will necessitate that a premium be applied to the labor rates specified herein. In no case shall the total of the premiums applied exceed the requirements specified in Section 1, Information to Ordering Activities, Paragraph 14, “Contractor Tasks/Special Requirements (C-FSS-370) (NOV 2001),” for each delivery order.

American Systems Corporation GS-35F-4581G Page 16

TERMS AND CONDITIONS APPLICABLE TO

AUTHENTICATION PRODUCTS AND SERVICES

(SPECIAL ITEM NUMBER 132-62)

1. ORDER

a. Agencies may use written orders, EDI orders, blanket purchase agreements, individual purchase orders, or task orders for ordering authentication products and services under this contract. Blanket Purchase Agreements shall not extend beyond the end of the contract period; all services and delivery shall be made and the contract terms and conditions shall continue in effect until the completion of the order. Orders for tasks which extend beyond the fiscal year for which funds are available shall include FAR 52.232-19 (Deviation – May 2003) Availability of Funds for the Next Fiscal Year. The purchase order shall specify the availability of funds and the period for which funds are available.

b. All task orders are subject to the terms and conditions of the contract. In the event of conflict between a task order and the contract, the contract will take precedence.

c. When placing an order, ordering activities may deal directly with the contractor or ordering activities may send the requirement to the Program Management Office to received assisted services for a fee.

2. PERFORMANCE OF SERVICES

a. The Contractor shall commence performance of services on the date agreed to by the Contractor and the ordering activity.

b. The Contractor agrees to render services only during normal working hours, unless otherwise agreed to by the Contractor and the ordering activity.

c. The ordering activity should include the criteria for satisfactory completion for each task in the Statement of Work or Delivery Order. Services shall be completed in a good and workmanlike manner.

d. Any Contractor travel required in the performance of the Services under SIN 132-62 must comply with the Federal Travel Regulation or Joint Travel Regulations, as applicable, in effect on the date(s) the travel is performed.

Established Federal Government per diem rates will apply to all Contractor travel. Contractors cannot use GSA city pair contracts.

3. STOP-WORK ORDER (FAR 52.242-15) (AUG 1989)

a. The Contracting Officer may, at any time, by written order to the Contractor, require the Contractor to stop all, or any part, of the work called for by this contract for a period of 90 days after the order is delivered to the Contractor, and for any further period to which the parties may agree. The order shall be specifically identified as a stop-work order issued under this clause. Upon receipt of the order, the Contractor shall immediately comply with its terms and take all reasonable steps to minimize the incurrence of costs allocable to the work covered by the order during the period of work stoppage. Within a period of 90 days after a stop-work is delivered to the Contractor, or within any extension of that period to which the parties shall have agreed, the Contracting Officer shall either-

(1) Cancel the stop-work order; or

(2) Terminate the work covered by the order as provided in the Default, or the Termination for Convenience of the Government, clause of this contract.

b. If a stop-work order issued under this clause is canceled or the period of the order or any extension thereof expires, the Contractor shall resume work. The Contracting Officer shall make an equitable adjustment in the delivery schedule or contract price, or both, and the contract shall be modified, in writing, accordingly, if-

(1) The stop-work order results in an increase in the time required for, or in the Contractor's cost properly allocable to, the performance of any part of this contract; and

(2) The Contractor asserts its right to the adjustment within 30 days after the end of the period of work stoppage; provided that if the Contracting Officer decides the facts justify the action, the Contracting Officer may receive and act upon the claim submitted at any time before final payment under this contract.

American Systems Corporation GS-35F-4581G Page 17

c. If a stop-work order is not canceled and the work covered by the order is terminated for the convenience of the Government, the Contracting Officer shall allow reasonable costs resulting from the stop-work order in arriving at the termination settlement.

d. If a stop-work order is not canceled and the work covered by the order is terminated for default, the Contracting Officer shall allow, by equitable adjustment or otherwise, reasonable costs resulting from the stop-work order.

4. INSPECTION OF SERVICES

The Inspection of Services–Fixed Price (AUG 1996) (Deviation – May 2003) clause at FAR 52.246-4 applies to firm-fixed price orders placed under this contract. The Inspection–Time-and-Materials and Labor-Hour (MAY 2001) (Deviation – May 2003) clause at FAR 52.246-6 applies to time-and-materials and labor-hour orders placed under this

5. RESPONSIBILITIES OF THE ORDERING ACTIVITY

Subject to security regulations, the ordering activity shall permit Contractor access to all facilities necessary to perform the requisite services.

6. INDEPENDENT CONTRACTOR

All services performed by the Contractor under the terms of this contract shall be an independent Contractor, and not as an agent or employee of the ordering activity.

7. ORGANIZATIONAL CONFLICTS OF INTEREST

a. Definitions.

“Contractor” means the person, firm, unincorporated association, joint venture, partnership, or corporation that is a party to this contract.

“Contractor and its affiliates” and “Contractor or its affiliates” refers to the Contractor, its chief executives, directors, officers, subsidiaries, affiliates, subcontractors at any tier, and consultants and any joint venture involving the Contractor, any entity into or with which the Contractor subsequently merges or affiliates, or any other successor or assignee of the Contractor.

An “Organizational conflict of interest” exists when the nature of the work to be performed under a proposed ordering activity contract, without some restriction on ordering activities by the Contractor and its affiliates, may either (i) result in an unfair competitive advantage to the Contractor or its affiliates or (ii) impair the Contractor’s or its affiliates’ objectivity in performing contract work.

b. To avoid an organizational or financial conflict of interest and to avoid prejudicing the best interests of the ordering activity, ordering activities may place restrictions on the Contractors, its affiliates, chief executives, directors, subsidiaries and subcontractors at any tier when placing orders against schedule contracts. Such restrictions shall be consistent with FAR 9.505 and shall be designed to avoid, neutralize, or mitigate organizational conflicts of interest that might otherwise exist in situations related to individual orders placed against the schedule contract. Examples of situations, which may require restrictions, are provided at FAR 9.508.

8. INVOICES

The Contractor, upon completion of the work ordered, shall submit invoices for products and/or services. Progress payments may be authorized by the ordering activity on individual orders if appropriate. Progress payments shall be based upon completion of defined milestones or interim products. Invoices shall be submitted monthly for recurring services performed during the preceding month.

9. PAYMENTS

For firm-fixed price orders the ordering activity shall pay the Contractor, upon submission of proper invoices or vouchers, the prices stipulated in this contract for service rendered and accepted. Progress payments shall be made only when authorized by the order. For time-and-materials orders, the Payments under Time-and-Materials and

American Systems Corporation GS-35F-4581G Page 18

Labor-Hour Contracts at FAR 52.212-4 (MAR 2009) (ALTERNATE I – OCT 2008) (DEVIATION I – FEB 2007) applies to time-and-materials orders placed under this contract. For labor-hour orders, the Payment under Time-and-Materials and Labor-Hour Contracts at FAR 52.212-4 (MAR 2009) (ALTERNATE I – OCT 2008) (DEVIATION I – FEB 2007) applies to labor-hour orders placed under this contract.

11. INCIDENTAL SUPPORT COSTS

Incidental support costs are available outside the scope of this contract. The costs will be negotiated separately with the ordering activity in accordance with the guidelines set forth in the FAR.

12. APPROVAL OF SUBCONTRACTS

The ordering activity may require that the Contractor receive, from the ordering activity's Contracting Officer, written consent before placing any subcontract for furnishing any of the work called for in a task order.

13. DESCRIPTION OF AUTHENTICATION PRODUCTS, SERVICES AND PRICING

Please see awarded pricing for HSPD-12 labor categories starting on Page 32.

American Systems Corporation GS-35F-4581G Page 19

CORPORATE OVERVIEW

AMERICAN SYSTEMS delivers exceptional, systems engineering, technical, and outsourcing services to government and private sector customers.