Federal Supply Schedule GS35F4050D

AUTHORIZED FEDERAL SUPPLY SERVICE

INFORMATION TECHNOLOGY SCHEDULE PRICELIST

GENERAL PURPOSE COMMERCIAL INFORMATION TECHNOLOGY

EQUIPMENT, SOFTWARE AND SERVICES

Special Item No. 132-8 Purchase of Equipment Special Item No. 132-12 Maintenance, Repair Service and Repair Parts/Spare Parts Special Item No. 132-33 Perpetual Software Licenses Special Item No. 132-34 Maintenance of Software Special Item No. 132-50 Training Courses Special Item No. 132-51 Information Technology Professional Services

Note: All non-professional labor categories must be incidental to and used solely to support hardware, software and/or professional services, and cannot be purchased separately.

SIN 132-8 PURCHASE OF EQUIPMENT

FSC CLASS 7010 - SYSTEM CONFIGURATION

End User Computers/Desktop Computers Professional Workstations Servers Laptop/Portable/Notebook Computers

FSC CLASS 7025 - INPUT/OUTPUT AND STORAGE DEVICES

Storage Devices including Magnetic Storage, Magnetic Tape Storage and Optical Disk Storage Other Input/Output and Storage Devices, Not Elsewhere Classified

SIN 132-12 - MAINTENANCE OF EQUIPMENT, REPAIR SERVICE, AND REPAIR PARTS/SPARE

PARTS (FPDS Code J070 - Maintenance and Repair Service)(Repair Parts/Spare Parts -

Repair Service Repair Parts/Spare Parts

NOTE: Installation must be incidental to, in conjunction with and in direct support of the products sold under SIN 132-8 of this contract and cannot be purchased separately. If the construction, alteration or repair is segregable and exceeds $2,000, then the requirements of the Davis-Bacon Act apply. In applying the Davis-Bacon Act, ordering activies are required to incorporate wage rate determinations into orders, as applicable.

SIN 132-33 - PERPETUAL SOFTWARE LICENSES

FSC CLASS 7030 - INFORMATION TECHNOLOGY SOFTWARE

Microcomputers

Application Software

NOTE: Offerors are encouraged to identify within their software items any component interfaces that support open standard interoperability. An item’s interfaces may be identified as interoperable on the basis of participation in a Government agency-sponsored program or in an independent organization program. Interfaces may be identified by reference to an interface registered in the component registry located at http://www.core.gov

SIN 132-34 - MAINTENANCE OF SOFTWARE

SIN 132-50 - TRAINING COURSES FOR INFORMATION TECHNOLOGY EQUIPMENT AND

SOFTWARE (FPDS Code U012)

SIN 132-51 - INFORMATION TECHNOLOGY (IT) PROFESSIONAL SERVICES

FPDS Code D301 IT Facility Operation and Maintenance FPDS Code D302 IT Systems Development Services FPDS Code D306 IT Systems Analysis Services FPDS Code D316 IT Network Management Services FPDS Code D399 Other Information Technology Services, Not Elsewhere Classified

Note 1: All non-professional labor categories must be incidental to and used solely to support hardware, software and/or professional services, and cannot be purchased separately.

Note 2: Offerors and Agencies are advised that the Group 70 – Information Technology Schedule is not to be used as a means to procure services which properly fall under the Brooks Act. These services include, but are not limited to, architectural, engineering, mapping, cartographic production, remote sensing, geographic information systems, and related services. FAR 36.6 distinguishes between mapping services of an A/E nature and mapping services which are not connected nor incidental to the traditionally accepted A/E Services.

Note 3: This solicitation is not intended to solicit for the reselling of IT Professional Services, except for the provision of implementation, maintenance, integration, or training services in direct support of a product.

Under such circumstances the services must be performance by the publisher or manufacturer or one of their authorized agents.

CompUSA, Inc

14951 N. Dallas Parkway

Dallas, TX 75240

(800) 266-7872, www.compusabusiness.com

Contract Number: GS-35F-4050D

Period Covered by Contract: April 1st, 1996 through March 31st, 2007

CompUSA GS-35F-4050D Pg 2 http://www.core.gov/ http://www.compusabusiness.com/

General Services Administration Federal Supply Service

Pricelist current through Modification PO-06013, effective 6-1-06

Products and ordering information in this Authorized FSS Information Technology Schedule Pricelist are also available on the GSA Advantage! System. Agencies can browse GSA Advantage! by accessing the Federal Supply Service’s Home Page via the Internet at http://www.fss.gsa.gov/

CompUSA GS-35F-4050D Pg 3 http://www.fss.gsa.gov/

Table of Contents

INFORMATION FOR ORDERING OFFICES .......................................................................................................................... 5-12

TERMS AND CONDITIONS APPLICABLE TO PURCHASE OF GENERAL

PURPOSE COMMERCIAL INFORMATION TECHNOLOGY EQUIPMENT

(SPECIAL ITEM 132-8) ........................................................................................................................................................... 13-14

TERMS AND CONDITIONS APPLICABLE TO MAINTENANCE AND REPAIR OF GOVERNMENT-OWNED GENERAL

PURPOSE COMMERCIAL INFORMATION

TECHNOLOGY EQUIPMENT, AFTER EXPIRATION OF GUARANTEE PROVISIONS

(SPECIAL ITEM 132-12) ......................................................................................................................................................... 15-18

TERMS AND CONDITIONS APPLICABLE TO TERM SOFTWARE LICENSE PERPETUAL SOFTWARE LICENSE (SPECIAL ITEM 132-33) AND MAINTENANCE OF SOFTWARE (SPECIAL ITEM 132-34) OF GENERAL PURPOSE

COMMERCIAL INFORMATION TECHNOLOGY SOFTWARE

LICENSES………………………………………………………………………………………………………………...……19-21

TERMS AND CONDITIONS APPLICABLE TO TRAINING OF GENERAL PURPOSE INFORMATION TECHNOLOGY

EQUIPMENT AND SOFTWARE (SPECIAL ITEM 132-50)……………………………………………………………… 22-23

TERMS AND CONDITIONS APPLICABLE TO INFORMATION TECHNOLOGY (IT).....................................................24-28

PROFESSIONAL SERVICES DESCRIPTIONS AND PRICING (SPECIAL ITEM NUMBER 132-51)

USA COMMITMENT TO PROMOTE SMALL BUSINESS PARTICIPATION

PROCUREMENT PROGRAMS

BLANKET PURCHASE AGREEMENTS...............................................................................................................................30-32

BASIC GUIDELINES FOR USING “CONTRACTOR TEAM ARRANGEMENTS”

COMPUSA PRICELIST............................................................................................................................................................34-63

STORE LOCATIONS........................................................................................................................................... 64-78

CompUSA GS-35F-4050D Pg 4

INFORMATION FOR ORDERING OFFICES

APPLICABLE TO ALL SPECIAL ITEM NUMBERS

SPECIAL NOTICE TO AGENCIES: Small Business Participation

SBA strongly supports the participation of small business concerns in the Federal Supply Schedules Program. To enhance Small Business Participation SBA policy allows agencies to include in their procurement base and goals, the dollar value of orders expected to be placed against the Federal Supply Schedules, and to report accomplishments against these goals.

For orders exceeding the micropurchase threshold, FAR 8.404 requires agencies to consider the catalogs/pricelists of at least three schedule contractors or consider reasonably available information by using the GSA Advantage!™ on-line shopping service (www.fss.gsa.gov). The catalogs/pricelists, GSA Advantage!™ and the Federal Supply Service Home Page (www.fss.gsa.gov) contain information on a broad array of products and services offered by small business concerns.

This information should be used as a tool to assist ordering activities in meeting or exceeding established small business goals. It should also be used as a tool to assist in including small, small disadvantaged, and women-owned small businesses among those considered when selecting pricelists for a best value determination.

For orders exceeding the micropurchase threshold, customers are to give preference to small business concerns when two or more items at the same delivered price will satisfy their requirement.

1. Geographic Scope of Contract:

The 48 contiguous states, Alaska, Hawaii, Puerto Rico, the District of Columbia, the U.S. Territories and commonwealths, U.S. Government facilities on the island of Okinawa, Japan, and U.S. Embassies and Consulates and authorized Outside the Continental United Statses (OCUNUS) organizations.

2. Contractor's Ordering Address and Payment Information:

Contractors are required to accept the Government purchase card for payments equal to or less than the micro-purchase threshold for oral or written delivery orders. Government purchase cards will be acceptable for payment above the micro-purchase threshold. In addition, bank account information for wire transfer payments will be shown on the invoice.

The following telephone number(s) can be used by ordering agencies to obtain technical and/or ordering assistance:

Submit all delivery orders to any of the Authorized Sales Locations.

For telephone orders and order status call 1-800-266-7872. Facsimile orders may be placed by dialing any of the Authorized Sales Locations as listed.

Each order will be given an Order Confirmation/Authorization Number (ex: "A10235").

CompUSA will use this sequential number internally to track each order.

All ordering personnel will receive an Order Confirmation Number via a return phone call or faxed note of confirmation.

CompUSA GS-35F-4050D Pg 5

Contractor’s Payment Address:

CompUSA, Inc.

P.O. Box 200670 Dallas, Texas 75320-0670 Attn: Accounts Receivable

The following telephone number can be used by ordering agencies to obtain technical and/or ordering assistance:

1-800-266-7872

3. LIABILITY FOR INJURY OR DAMAGE

The Contractor shall not be liable for any injury to Government personnel or damage to Government property arising from the use of equipment maintained by the Contractor, unless such injury or damage is due to the fault or negligence of the Contractor.

4. Statistical Data for Government Ordering Office Completion of Standard Form 279:

Block 9: G. Order/Modification Under Federal Schedule Block 16: Data Universal Numbering System (DUNS) Number: 12-142-8098 Block 30: Type of Cont ractor - C. Large Business

Block 31: Woman-Owned Small Business - NO Block 36: Contractor's Taxpayer Identification Number (TIN): 75-226-1497

4a. CAGE Code: OBHJ8 4b. Contractor has registered with the Central Contractor Registration Database.

5. FOB Destination

6. DELIVERY SCHEDULE

a. TIME OF DELIVERY: The Contractor shall deliver to destination within the number of calendar days after receipt of order (ARO), as set forth below:

SPECIAL ITEM NUMBER DELIVERY TIME (Days ARO)

132-8 60 Days 132-12 Per MFG 132-33 60 Days 132-34 Per MFG 132-50 Per Class Schedule 132-51 As mutually agreed

b. URGENT REQUIREMENTS: When the Federal Supply Schedule contract delivery period does not meet the bona fide urgent delivery requirements of an ordering agency, agencies are encouraged, if time permits, to contact the Contractor for the purpose of obtaining accelerated delivery. The Contractor shall reply to the inquiry within 3 workdays after receipt. (Telephonic replies shall be confirmed by the Contractor in writing.) If the Contractor offers an accelerated delivery time acceptable to the ordering agency, any order(s) placed pursuant to the agreed upon accelerated delivery time frame shall be delivered within this shorter delivery time and in accordance with all other terms and conditions of the contract.

Priority Service is available to those customers who are unable to wait the normal turn-around time for repairs to their system. The charge is added to the sale above and beyond the regular price of the service to be performed.

CompUSA GS-35F-4050D Pg 6

SKU#921253 Price $70.67

SHIPMENT OF PRODUCTS

For both hardware and software the F.O.B. point is destination for locations within the 48 contiguous states and District of Columbia.

For overseas locations and Alaska, Hawaii and the U.S. territories and commonwealths, the F.O.B point is destination to the port of embarkation within the continental U.S. or F.O.B. origin if CompUSA is required to ship direct to locations outside the continental U.S.

Partial orders may be shipped. If a partial shipment is made, CompUSA will invoice each partial shipment separately. The ordering agency must pay for each shipment as invoiced by CompUSA. Authorization for partial shipment should be stated on the purchase order.

DELIVERY TIME

The standard delivery time is 60 days from the receipt of order.

7. Discounts: Prices shown are NET Prices; Basic Discounts have been deducted.

a. Prompt Payment: Net 30 days from receipt of invoice or date of acceptance, whichever is later.

b. Quantity: None

c. Dollar Volume: None

d. Government Educational Institutions are offered the same discounts as all other Government customers.

8. Trade Agreements Act of 1979, as amended:

All items are U.S. made end products, designated country end products, Caribbean Basin country end products, Canadian end products, or Mexican end products as defined in the Trade Agreements Act of 1979, as amended.

9. Statement Concerning Availability of Export Packing: Export packing is available at extra cost outside the scope of this contract.

10. Small Requirements: The minimum dollar value of orders to be issued is $100.

11. Maximum Order (All dollar amounts are exclusive of any discount for prompt payment.)

a. The Maximum Order value for the following Special Item Numbers (SINs) is $500,000:

Special Item Number 132-8 - Purchase of Equipment Special Item Number 132-12 – Maintenance of Equipment, Repair Service, and Repair Parts/Spare Parts Special Item Number 132-33 - Perpetual Software Licenses Special Item Number 132-34 – Maintenance of Software Special Item Number 132-51 - Information Technology (IT) Professional Services

b. The Maximum Order value for the following Special Item Numbers (SINs) is $25,000:

Special Item Number 132-50 - Training Courses

CompUSA GS-35F-4050D Pg 7

12. USE OF FEDERAL SUPPLY SERVICE INFORMATION TECHNOLOGY SCHEDULE

CONTRACTS. In accordance with FAR 8.404:

Ordering activities shall use the ordering procedures of Federal Acquisition Regulation (FAR) 8.405 when placing an order or establishing a BPA for supplies or services. These procedures apply to all schedules.

a. FAR 8.405-1 Ordering procedures for supplies, and services not requiring a statement of work.

b. FAR 8.405-2 Ordering procedures for services requiring a statement of work.

13. FEDERAL INFORMATION TECHNOLOGY/TELECOMMUNICATION STANDARDS

REQUIREMENTS: Federal departments and agencies acquiring products from this Schedule must comply with the provisions of the Federal Standards Program, as appropriate (reference: NIST Federal Standards Index).

Inquiries to determine whether or not specific products listed herein comply with Federal Information Processing Standards (FIPS) or Federal Telecommunication Standards (FED-STDS), which are cited by ordering offices, shall be responded to promptly by the Contractor.

13.1 FEDERAL INFORMATION PROCESSING STANDARDS PUBLICATIONS (FIPS PUBS):

Information Technology products under this Schedule that do not conform to Federal Information Processing Standards (FIPS) should not be acquired unless a waiver has been granted in accordance with the applicable "FIPS Publication." Federal Information Processing Standards Publications (FIPS PUBS) are issued by the U.S.

Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security Act. Information concerning their availability and applicability should be obtained from the National Technical Information Service (NTIS), 5285 Port Royal Road, Springfield, Virginia 22161. FIPS PUBS include voluntary standards when these are adopted for Federal use. Individual orders for FIPS PUBS should be referred to the NTIS Sales Office, and orders for subscription service should be referred to the NTIS Subscription Officer, both at the above address, or telephone number (703) 487-4650.

13.2 FEDERAL TELECOMMUNICATION STANDARDS (FED-STDS): Telecommunication products under this Schedule that do not conform to Federal Telecommunication Standards (FED-STDS) should not be acquired unless a waiver has been granted in accordance with the applicable "FED-STD." Federal Telecommunication Standards are issued by the U.S. Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security Act. Ordering information and information concerning the availability of FED-STDS should be obtained from the GSA, Federal Supply Service, Specification Section, 470 East L’Enfant Plaza, Suite 8100, SW, Washington, DC 20407, telephone number (202)619-8925. Please include a self-addressed mailing label when requesting information by mail. Information concerning their applicability can be obtained by writing or calling the U.S. Department of Commerce, National Institute of Standards and Technology, Gaithersburg, MD 20899, telephone number (301)975-2833.

14. CONTRACTOR TASKS / SPECIAL REQUIREMENTS (C-FSS-370) (NOV 2001)

(a) Security Clearances: The Contractor may be required to obtain/possess varying levels of security clearances in the performance of orders issued under this contract. All costs associated with obtaining/possessing such security clearances should be factored into the price offered under the Multiple Award Schedule.

(b) Travel: The Contractor may be required to travel in performance of orders issued under this contract. Allowable travel and per diem charges are governed by Pub .L. 99-234 and FAR Part 31, and are reimbursable by the ordering agency or can be priced as a fixed price item on orders placed under the Multiple Award Schedule. The Industrial Funding Fee does NOT apply to travel and per diem charges.

NOTE: Refer to FAR Part 31.205-46 Travel Costs, for allowable costs that pertain to official company business travel in regards to this contract.

(c) Certifications, Licenses and Accreditations: As a commercial practice, the Contractor may be required to obtain/possess any variety of certifications, licenses and accreditations for specific FSC/service code classifications offered. All costs

CompUSA GS-35F-4050D Pg 8 associated with obtaining/ possessing such certifications, licenses and accreditations should be factored into the price offered under the Multiple Award Schedule program.

(d) Insurance: As a commercial practice, the Contractor may be required to obtain/possess insurance coverage for specific FSC/service code classifications offered. All costs associated with obtaining/possessing such insurance should be factored into the price offered under the Multiple Award Schedule program.

(e) Personnel: The Contractor may be required to provide key personnel, resumes or skill category descriptions in the performance of orders issued under this contract. Ordering activities may require agency approval of additions or replacements to key personnel.

(f) Organizational Conflicts of Interest: Where there may be an organizational conflict of interest as determined by the ordering agency, the Contractor’s participation in such order may be restricted in accordance with FAR Part 9.5.

(g) Documentation/Standards: The Contractor may be requested to provide products or services in accordance with rules, regulations, OMB orders, standards and documentation as specified by the agency’s order.

(h) Data/Deliverable Requirements: Any required data/deliverables at the ordering level will be as specified or negotiated in the agency’s order.

(i) Government-Furnished Property: As specified by the agency’s order, the Government may provide property, equipment, materials or resources as necessary.

(j) Availability of Funds: Many Government agencies’ operating funds are appropriated for a specific fiscal year. Funds may not be presently available for any orders placed under the contract or any option year. The Government’s obligation on orders placed under this contract is contingent upon the availability of appropriated funds from which payment for ordering purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are available to the ordering Contracting Officer.

15. CONTRACT ADMINISTRATION FOR ORDERING OFFICES: Any ordering office, with respect to any one or more delivery orders placed by it under this contract, may exercise the same rights of termination as might the GSA Contracting Officer under provisions of FAR 52.212-4, paragraphs (l) Termination for the Government’s convenience, and (m) Termination for Cause (See C.1.)

16. GSA ADVANTAGE!

GSA Advantage! is an on-line, interactive electronic information and ordering system that provides on-line access to vendors' schedule prices with ordering information. GSA Advantage! will allow the user to perform various searches across all contracts including, but not limited to:

(1) Manufacturer;

(2) Manufacturer's Part Number; and

(3) Product categories.

Agencies can browse GSA Advantage! by accessing the Internet World Wide Web utilizing a browser (ex.:

NetScape). The Internet address is http://www.fss.gsa.gov/.

17. PURCHASE OF OPEN MARKET ITEMS

NOTE: Open Market Items are also known as incidental items, noncontract items, non-Schedule items, and items not on a Federal Supply Schedule contract. ODCs (Other Direct Costs) are not part of this contract and should be treated as open market purchases. Ordering Activities procuring open market items must follow FAR 8.402(f).

CompUSA GS-35F-4050D Pg 9 http://www.fss.gsa.gov/

For administrative convenience, an ordering office contracting officer may add items not on the Federal Supply Multiple Award Schedule (MAS) -- referred to as open market items -- to a Federal Supply Schedule blanket purchase agreement (BPA) or an individual task or delivery order, only if-

(1) All applicable acquisition regulations pertaining to the purchase of the items not on the Federal Supply Schedule have been followed (e.g., publicizing (Part 5), competition requirements (Part 6), acquisition of commercial items (Part 12), contracting methods (Parts 13, 14, and 15), and small business programs (Part 19));

(2) The ordering office contracting officer has determined the price for the items not on the Federal Supply Schedule is fair and reasonable;

(3) The items are clearly labeled on the order as items not on the Federal Supply Schedule; and

(4) All clauses applicable to items not on the Federal Supply Schedule are included in the order.

18. CONTRACTOR COMMITMENTS, WARRANTIES AND REPRESENTATIONS

a. For the purpose of this contract, commitments, warranties and representations include, in addition to those agreed to for the entire schedule contract:

(1) Time of delivery/installation quotations for individual orders;

(2) Technical representations and/or warranties of products concerning performance, total system performance and/or configuration, physical, design and/or functional characteristics and capabilities of a product/equipment/ service/software package submitted in response to requirements which result in orders under this schedule contract.

(3) Any representations and/or warranties concerning the products made in any literature, description, drawings and/or specifications furnished by the Contractor.

b. The above is not intended to encompass items not currently covered by the GSA Schedule contract.

19. OVERSEAS ACTIVITIES

The terms and conditions of this contract shall apply to all orders for installation, maintenance and repair of equipment in areas listed in the pricelist outside the 48 contiguous states and the District of Columbia, except as indicated below:

Upon request of the Contractor, the Government may provide the Contractor with logistics support, as available, in accordance with all applicable Government regulations. Such Government support will be provided on a reimbursable basis, and will only be provided to the Contractor's technical personnel whose services are exclusively required for the fulfillment of the terms and conditions of this contract.

20. BLANKET PURCHASE AGREEMENTS (BPAs)

The use of BPAs under any schedule contract to fill repetitive needs for supplies or services is allowable. BPAs may be established with one or more schedule contractors. The number of BPAs to be established is within the discretion of the ordering activity establishing the BPA and should be based on a strategy that is expected to maximize the effectiveness of the BPA(s). Ordering activities shall follow FAR 8.405-3 when creating and implementing BPA(s).

21. CONTRACTOR TEAM ARRANGEMENTS

Contractors participating in contractor team arrangements must abide by all terms and conditions of their respective contracts. This includes compliance with Clauses 552.238-74, Contractor’s Reports of Sales and 552.238-76, Industrial Funding Fee, i.e., each contractor (team member) must report sales and remit the IFF for all products and services provided under its individual contract.

CompUSA GS-35F-4050D Pg 10

22. INSTALLATION, DEINSTALLATION, REINSTALLATION

The Davis-Bacon Act (40 U.S.C. 276a-276a-7) provides that contracts in excess of $2,000 to which the United States or the District of Columbia is a party for construction, alteration, or repair (including painting and decorating) of public buildings or public works with the United States, shall contain a clausae that no laborer or mechanic employed directly upon the site of the work shall received less than the prevailing wage rates as determined by the Secretary of Labor. The requirements of the Davis-Bacon Act do not apply if the construction work is incidental to the furnishing of supplies, equipment, or services. For example, the requirements do not apply to simple installation or alteration of a public building or public work that is incidental to furnishing supplies or equipment under a supply contract. However, if the construction, alteration or repair is segregable and exceeds $2,000, then the requirements of the Davis-Bacon Act applies.

The requisitioning activity issuing the task order against this contract will be responsible for proper administration and enforcement of the Federal labor standards covered by the Davis-Bacon Act. The proper Davis-Bacon wage determination will be issued by the ordering activity at the time a request for quotations is made for applicable construction classified installation, deinstallation, and reinstallation services under SIN 132-8.

23. SECTION 508 COMPLIANCE.

If applicable, Section 508 compliance information on the supplies and services in this contract are available in Electronic and Information Technology (EIT) at the following:

APC http://www.apcc.com/solutions/government/special_products.cfm?solutions=Government%2FEducation

The EIT standard can be found at: www.Section508.gov/.

24. PRIME CONTRACTOR ORDERING FROM FEDERAL SUPPLY SCHEDULES.

Prime Contractors (on cost reimbursement contracts) placing orders under Federal Supply Schedules, on behalf of an ordering activity, shall follow the terms of the applicable schedule and authorization and include with each order

(a) A copy of the authorization from the ordering activity with whom the contractor has the prime contract (unless a copy was previously furnished to the Federal Supply Schedule contractor); and

(b) The following statement:

This order is placed under written authorization from _______ dated _______. In the event of any inconsistency between the terms and conditions of this order and those of your Federal Supply Schedule contract, the latter will govern.

25. INSURANCE—WORK ON A GOVERNMENT INSTALLATION (JAN 1997)(FAR 52.228-5)

(a) The Contractor shall, at its own expense, provide and maintain during the entire performance of this contract, at least the kinds and minimum amounts of insurance required in the Schedule or elsewhere in the contract.

(b) Before commencing work under this contract, the Contractor shall notify the Contracting Officer in writing that the required insurance has been obtained. The policies evidencing required insurance shall contain an endorsement to the effect that any cancellation or any material change adversely affecting the Government's interest shall not be effective—

(1) For such period as the laws of the State in which this contract is to be performed prescribe; or

(2) Until 30 days after the insurer or the Contractor gives written notice to the Contracting Officer, whichever period is longer.

(c) The Contractor shall insert the substance of this clause, including this paragraph (c), in subcontracts under this contract that require work on a Government installation and shall require subcontractors to provide and maintain the insurance required in the Schedule or elsewhere in the contract. The Contractor shall maintain a copy

CompUSA GS-35F-4050D Pg 11 http://www.apcc.com/solutions/government/special_products.cfm?solutions=Government%2FEducation http://www.section508.gov/ of all subcontractors' proofs of required insurance, and shall make copies available to the Contracting Officer upon request.

26. SOFTWARE INTEROPERABILITY.

Offerors are encouraged to identify within their software items any component interfaces that support open standard interoperability. An item’s interface may be identified as interoperable on the basis of participation in a Government agency-sponsored program or in an independent organization program. Interfaces may be identified by reference to an interface registered in the component registry located at http://www.core.gov

27. ADVANCE PAYMENTS

A payment under this contract to provide a service or deliver an article for the United States Government may not be more than the value of the service already provided or the article already delivered. Advance or pre-payment is not authorized or allowed under this contract. (31 U.S.C. 3324)

CompUSA GS-35F-4050D Pg 12 http://www.core.gov/

TERMS AND CONDITIONS APPLICABLE TO PURCHASE OF

GENERAL PURPOSE COMMERCIAL INFORMATION TECHNOLOGY EQUIPMENT

(SPECIAL ITEM NUMBER 132-8)

1. MATERIAL AND WORKMANSHIP

All equipment furnished hereunder must satisfactorily perform the function for which it is intended.

2. ORDER

Written orders, EDI orders (GSA Advantage! and FACNET), credit card orders, and orders placed under blanket purchase agreements (BPA) agreements shall be the basis for purchase in accordance with the provisions of this contract. If time of delivery extends beyond the expiration date of the contract, the Contractor will be obligated to meet the delivery and installation date specified in the original order.

For credit card orders and BPAs, telephone orders are permissible.

3. TRANSPORTATION OF EQUIPMENT

FOB DESTINATION. Prices cover equipment delivery to destination, for any location within the geographic scope of this contract.

4. INSTALLATION AND TECHNICAL SERVICES

Equipment is normally self-installable.

a. INSTALLATION. When the equipment provided under this contract is not normally self-installable, the Contractor's technical personnel shall be available to the Government, at the Government's location, to install the equipment and to train Government personnel in the use and maintenance of the equipment. The charges, if any, for such services are listed below, or in the price schedule:

b. INSTALLATION, DEINSTALLATION, REINSTALLATION. The Davis-Bacon Act (40 U.S.C. 276a- 276a-7) provides that contracts in excess of $2,000 to which the United States or the District of Columbia is a party for construction, alteration, or repair (including painting and decorating) of public buildings or public works with the United States, shall contain a clausae that no laborer or mechanic employed directly upon the site of the work shall received less than the prevailing wage rates as determined by the Secretary of Labor. The requirements of the Davis-Bacon Act do not apply if the construction work is incidental to the furnishing of supplies, equipment, or services. For example, the requirements do not apply to simple installation or alteration of a public building or public work that is incidental to furnishing supplies or equipment under a supply contract. However, if the construction, alteration or repair is segregable and exceeds $2,000, then the requirements of the Davis-Bacon Act applies.

The requisitioning activity issuing the task order against this contract will be responsible for proper administration and enforcement of the Federal labor standards covered by the Davis-Bacon Act. The proper Davis-Bacon wage determination will be issued by the ordering activity at the time a request for quotations is made for applicable construction classified installation, deinstallation, and reinstallation services under SIN 132-8.

c. OPERATING AND MAINTENANCE MANUALS. The Contractor shall furnish the Government with one (1) copy of all operating and maintenance manuals which are normally provided with the equipment being purchased.

CompUSA GS-35F-4050D Pg 13

5. INSPECTION/ACCEPTANCE

The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The Government reserves the right to inspect or test any equipment that has been tendered for acceptance. The Government may require repair or replacement of nonconforming equipment at no increase in contract price. The Government must exercise its postacceptance rights (1) within a reasonable time after the defect was discovered or should have been discovered; and (2) before any substantial change occurs in the condition of the item, unless the change is due to the defect in the item.

6. WARRANTY

a. Unless specified otherwise in this contract, the Contractor’s standard commercial warranty as stated in the contract’s commercial pricelist will apply to this contract.

See price list.

b. The Contractor warrants and implies that the items delivered hereunder are merchantable and fit for use for the particular purpose described in this contract.

c. Limitation of Liability. Except as otherwise provided by an express or implied warranty, the Contractor will not be liable to the Government for consequential damages resulting from any defect or deficiencies in accepted items.

d. If inspection and repair of defective equipment under this warranty will be performed at the Contractor's plant, at the following addresses listed for CompUSA Stores. Defective equipment will be repaired or replaced within 48 hours after receipt.

7. PURCHASE PRICE FOR ORDERED EQUIPMENT

The purchase price that the Government will be charged will be the Government purchase price in effect at the time of order placement, or the Government purchase price in effect on the installation date (or delivery date when installation is not applicable), whichever is less.

8. RESPONSIBILITIES OF THE CONTRACTOR

The Contractor shall comply with all laws, ordinances, and regulations (Federal, State, City or otherwise) covering work of this character, and shall include all costs, if any, of such compliance in the prices quoted in this offer.

9. TRADE-IN OF INFORMATION TECHNOLOGY EQUIPMENT

When an agency determines that Information Technology equipment will be replaced, the agency shall follow the contracting policies and procedures in the Federal Acquisition Regulation (FAR), the policies and procedures regarding disposition of information technology excess personal property in the Federal Property Management Regulations (FPMR) (41 CFR 101-43.6), and the policies and procedures on exchange/sale contained in the FPMR (41 CFR part 101-46).

CompUSA GS-35F-4050D Pg 14

TERMS AND CONDITIONS APPLICABLE TO REPAIR

SERVICE AND REPAIR PARTS/SPARE PARTS FOR GOVERNMENT-OWNED

GENERAL PURPOSE COMMERCIAL INFORMATION TECHNOLOGY

EQUIPMENT (AFTER EXPIRATION OF GUARANTEE/WARRANTY

PROVISIONS AND/OR WHEN REQUIRED SERVICE IS NOT COVERED

BY GUARANTEE/WARRANTY PROVISIONS) AND FOR LEASED EQUIPMENT

(SPECIAL ITEM NUMBER 132-12)

1. SERVICE AREAS

a. The repair service rates listed herein are applicable to any Government location within a 50 mile radius of the Contractor's service points. If any additional charge is to apply because of the greater distance from the Contractor's service locations, the mileage rate or other distance factor shall be stated in paragraphs 7.d and 8.d of this Special Item Number 132-12.

b. When repair services cannot be performed at the Government installation site, the repair services will be performed at the Contractor's plant(s) listed on at one of the CompUSA Stores (attached).

2. REPAIR SERVICE AND REPAIR PARTS/SPARE PARTS ORDERS

a. Agencies may use written orders, EDI orders, credit card orders, blanket purchase agreements (BPAs), or small order procedures for ordering repair service and/or repair parts/spare parts under this contract. Orders for repair service shall not extend beyond the end of the contract period.

b. When repair service is ordered, only one chargeable repairman shall be dispatched to perform repair service, unless the ordering office agrees, in advance, that additional repair personnel are required to effect repairs.

3. LOSS OR DAMAGE

When the Contractor removes equipment to his establishment for repairs, the Contractor shall be responsible for any damage or loss, from the time the equipment is removed from the Government installation, until the equipment is returned to such installation.

4. SCOPE

a. Repair service and repair parts/spare parts shall apply exclusively to the equipment types/models within the scope of this Information Technology Schedule.

5. RESPONSIBILITIES OF THE GOVERNMENT

a. Government personnel shall not attempt repairs to equipment, unless agreed to by the Contractor.

b. Subject to security regulations, the Government shall permit access to the equipment which is to be repaired.

6. RESPONSIBILITIES OF THE CONTRACTOR

For equipment not covered by a warranty, the Contractor's repair service personnel shall complete repairs as soon as possible after notification by the Government that service is required. Within the service areas, this repair service should normally be done within 4 hours after notification.

CompUSA GS-35F-4050D Pg 15

7. REPAIR SERVICE RATE PROVISIONS

a. CHARGES. Charges for repair service will include the labor charge, computed at the rates set forth below, for the time during which repairmen are actually engaged in work, and, when applicable, the charge for travel or transportation.

b. MULTIPLE MACHINES. When repairs are ordered by a Government agency on two or more machines located in one or more buildings within walking distance of each other, the charges will be computed from the time the repairman commences work on the first machine, until the work is completed on the last machine. The time required to go from one machine to another, or from one building to another, will be considered actual work performance, and chargeable to the Government, provided the time consumed in going between machines (or buildings) is reasonable.

c. TRAVEL OR TRANSPORTATION

(1) AT THE CONTRACTOR'S SHOP

(a) When equipment is returned to the Contractor's shop for adjustments or repairs which are not covered by the guarantee/warranty provision, the cost of transportation, packing, etc., from the Government location to the Contractor's plant, and return to the Government location, shall be borne by the Government.

(b) The Government should not return defective equipment to the Contractor for adjustments and repairs or replacement without his prior consultation and instruction.

(2) AT THE GOVERNMENT LOCATION (Within Established Service Areas)

When equipment is repaired at the Government location, and repair service rates are established for service areas or zones, the listed rates are applicable to any Government location within such service areas or zones. No extra charge, time, or expense will be allowed for travel or transportation of repairmen or machines to or from the Government office; such overhead is included in the repair service rates listed.

(3) AT THE GOVERNMENT LOCATION (Outside Established Service Areas)

(a) The repair service rates listed for subparagraph (2) above apply, except that a travel charge of (in accordance with Joint Travel Regulatiuons) per mile for repairmen will apply to the round-trip distance between the geographic limits of the applicable service area and the Government location. Such charge will apply as an additional charge, but it will be limited to one round trip for each request that is made by the ordering activity for repair service, regardless of whether repairs are performed at the Government location or at the Contractor's shop.

(b) When the overall travel charge computed at the above mileage rate is unreasonable (considering the time required for travel, actual and necessary transportation costs, and the allowable Government per diem rate for each night the repairman is required to remain overnight at the Government location), the Government shall have the option of reimbursing the Contractor for actual costs, provided that the actual costs are reasonable and allowable. The Contractor shall furnish the Government with a report of travel performed and related expenses incurred. The report shall include departure and arrival dates, times, and the applicable mode of travel.

d. LABOR RATES

(1) REGULAR HOURS

The Regular Hours repair service rates listed herein shall entitle the Government to repair service during the period 8:00 a.m. to 5:00 p.m., Monday through Friday, exclusive of holidays observed at the Government location. There shall be no additional charge for repair service which was requested during Regular Hours, but performed outside the Regular Hours defined above, at the convenience of the Contractor.

CompUSA GS-35F-4050D Pg 16

(2) AFTER HOURS

When the Government requires that repair service be performed outside the Regular Hours defined above, except Sundays and Holidays observed at the Government location, the After Hours repair service rates listed herein shall apply. The Regular Hours rates defined above shall apply when repair service is requested during Regular Hours, but performed After Hours at the convenience of the Contractor.

(3) SUNDAYS AND HOLIDAYS

When the Government requires that repair service be performed on Sundays and Holidays observed at the Government location, the Sundays and Holidays repair service rates listed herein shall apply. When repair service is requested to be performed during Regular Hours and/or After Hours, but is performed at the convenience of the Contractor on Sundays or Holidays observed at the Government location, the Regular Hours and/or After Hours repair service rates, as applicable, shall apply.

REPAIR SERVICE RATES

REGULAR AFTER SUNDAYS

AND

MINIMUM HOURS HOURS HOLIDAYS

LOCATION CHARGE * PER HOUR ** PER HOUR ** PER HOUR

CONTRACTOR'S SHOP $48.88 $48.88 $74.81 $74.81

GOVERNMENT LOCATION

(WITHIN ESTABLISHED

SERVICE AREAS) $117.70 $88.78 $132.67 $132.67

GOVERNMENT LOCATION

(OUTSIDE ESTABLISHED

SERVICE AREAS) $176.56 $88.78 $132.67 $132.67

*MINIMUM CHARGES INCLUDE 1 FULL HOURS ON THE JOB.

**FRACTIONAL HOURS, AT THE END OF THE JOB, WILL BE PRORATED TO THE NEAREST QUARTER HOUR.

8. REPAIR PARTS/SPARE PARTS RATE PROVISIONS

All parts, furnished as spares or as repair parts in connection with the repair of equipment, unless otherwise indicated in this pricelist, shall be new, standard parts manufactured by the equipment manufacturer. All parts shall be furnished at prices indicated in the current manufacturer’s Contractor's commercial pricelist at a discount of 0% from such listed prices.

9. GUARANTEE/WARRANTY—REPAIR SERVICE AND REPAIR PARTS/SPARE PARTS

a. REPAIR SERVICE

All repair work will be guaranteed/warranted for a period per the applicable manufacturer’s repair service and repair parts program.

b. REPAIR PARTS/SPARE PARTS

All parts, furnished either as spares or repairs parts will be guaranteed/warranted for a period per the applicable manufacturer’s repair service and repair parts program.

CompUSA GS-35F-4050D Pg 17

10. INVOICES AND PAYMENTS

a. Repair Service and Repair Parts/Spare Parts

Invoices for repair service and parts shall be submitted by the Contractor as soon as possible after completion of work. Payment under blanket purchase agreements will be made quarterly or monthly, except where cash payment procedures are used. Invoices shall be submitted separately to each Government office ordering services under the contract. The cost of repair parts shall be shown as a separate item on the invoice, and shall be priced in accordance with paragraph #7, above. PROMPT PAYMENT DISCOUNT, IF APPLICABLE, SHALL BE SHOWN ON THE

INVOICE.

CompUSA GS-35F-4050D Pg 18

TERMS AND CONDITIONS APPLICABLE TO

PERPETUAL SOFTWARE LICENSES (SPECIAL ITEM NUMBER 132-33) AND

MAINTENANCE (SPECIAL ITEM NUMBER 132-34) OF GENERAL PURPOSE

COMMERCIAL INFORMATION TECHNOLOGY SOFTWARE

1. INSPECTION/ACCEPTANCE

The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The Government reserves the right to inspect or test any software that has been tendered for acceptance. The Government may require repair or replacement of nonconforming software at no increase in contract price. The Government must exercise its postacceptance rights (1) within a reasonable time after the defect was discovered or should have been discovered; and (2) before any substantial change occurs in the condition of the software, unless the change is due to the defect in the software.

2. GUARANTEE/WARRANTY

a. Unless specified otherwise in this contract, the Contractor’s standard commercial guarantee/warranty as stated in the contract’s commercial pricelist will apply to this contract.

See price list.

b. The Contractor warrants and implies that the items delivered hereunder are merchantable and fit for use for the particular purpose described in this contract.

c. Limitation of Liability. Except as otherwise provided by an express or implied warranty, the Contractor will not be liable to the Government for consequential damages resulting from any defect or deficiencies in accepted items.

3. TECHNICAL SERVICES

The Contractor, without additional charge to the Government, shall provide a hot line technical support number

(800) 266-7872 for the purpose of providing user assistance and guidance in the implementation of the software.

The technical support number is available from 8:00am to 5:00pm E.S.T.

4. SOFTWARE MAINTENANCE

a. Software maintenance service shall include the following:

Refer to the individual manufacturer maintenance.

b. Invoices for maintenance service shall be submitted by the Contractor on a quarterly or monthly basis, after the completion of such period. Maintenance charges must be paid in arrears (31 U.S.C. 3324). PROMPT

PAYMENT DISCOUNT, IF APPLICABLE, SHALL BE SHOWN ON THE INVOICE.

5. MAINTENANCE (132-34)

a. The Contractor shall honor orders for periods for the duration of the contract period or a lessor period of time.

c. Annual Funding. Renewal of the maintenance orders citing the new appropriation shall be required, if the maintenance is to be continued during any remainder of the contract period.

CompUSA GS-35F-4050D Pg 19

d. Cross-Year Funding Within Contract Period. Where an ordering office’s specific appropriation authority provides for funds in excess of a 12 month (fiscal year) period, the ordering office may place an order under this schedule contract for a period up to the expiration of the contract period, notwithstanding the intervening fiscal years.

e. Ordering offices should notify the Contractor in writing thirty (30) calendar days prior to the expiration of an order, if the maintenance is to be terminated at that time. Orders for the continuation of maintenance will be required if the maintenance is to be continued during the subsequent period.

6. UTILIZATION LIMITATIONS - (132-33, AND 132-34)

a. Software acquisition is limited to commercial computer software defined in FAR Part 2.101.

b. When acquired by the Government, commercial computer software and related documentation so legend shall be subject to the following:

(1) Title to and ownership of the software and documentation shall remain with the Contractor, unless otherwise specified.

(2) Software licenses are by site and by agency. An agency is defined as a cabinet level or independent agency. The software may be used by any subdivision of the agency (service, bureau, division, command, etc.) that has access to the site the software is placed at, even if the subdivision did not participate in the acquisition of the software. Further, the software may be used on a sharing basis where multiple agencies have joint projects that can be satisfied by the use of the software placed at one agency's site. This would allow other agencies access to one agency's database. For Government public domain databases, user agencies and third parties may use the computer program to enter, retrieve, analyze and present data. The user agency will take appropriate action by instruction, agreement, or otherwise, to protect the Contractor's proprietary property with any third parties that are permitted access to the computer programs and documentation in connection with the user agency's permitted use of the computer programs and documentation. For purposes of this section, all such permitted third parties shall be deemed agents of the user agency.

(3) Except as is provided in paragraph 8.b(2) above, the Government shall not provide or otherwise make available the software or documentation, or any portion thereof, in any form, to any third party without the prior written approval of the Contractor. Third parties do not include prime Contractors, subcontractors and agents of the government who have the Government's permission to use the licensed software and documentation at the facility, and who have agreed to use the licensed software and documentation only in accordance with these restrictions. This provision does not limit the right of the Government to use software, documentation, or information therein, which the Government may already have or obtains without restrictions.

(4) The Government shall have the right to use the computer software and documentation with the computer for which it is…