MAS - Comptel Inc. - GS35F296BA

GENERAL SERVICES ADMINISTRATION

FEDERAL SUPPLY SERVICE

AUTHORIZED FEDERAL SUPPLY SCHEDULE CATALOG/PRICE LIST

On-line access to contract ordering information, terms and conditions, up-to-date pricing, and the option to create an electronic delivery order is available through GSA Advantage!, a menu-driven database system. The INTERNET address for GSA Advantage! is http://www.gsaadvantage.gov SCHEDULE TITLE: Multiple Award Schedule (MAS)

SPECIAL ITEM NUMBER 54151S - INFORMATION TECHNOLOGY (IT) PROFESSIONAL SERVICES

541511 541512 541519 541513 Custom Computer Programming Services Computer Systems Design Services Other Computer Related Services Computer Facilities Management Services

For more information on ordering from Federal Supply go to this website: www.gsa.gov/schedules Comptel, Inc.

2114 Tysons Executive Ct.

Dunn Loring, VA 22027 Phone: 703-582-7817 * Fax: 703-852-4396 www.comptelinc.com.com Small Disadvantaged Business

General Services Administration Federal Acquisition Service Pricelist current through MAS Refresh#6 Modification #_A885__, dated _8/17/2024, and Modification PO-0028 dated 2/15/2024.

Products and ordering information in this Authorized Information Technology Schedule Pricelist are also available on the GSA Advantage! System (http://www.gsaadvantage.gov).

Table of Contents

CUSTOMER INFORMATION:

1a. TABLE OF AWARDED SPECIAL ITEM NUMBERS (SINs)

SIN

DESCRIPTION

Cooperative Purchasing (RC) and Disaster Recovery Purchasing (STLOC) are available

1b. HOURLY RATES (Services only): See page 17

2. MAXIMUM ORDER*: SIN 54151S $500,000 per order

NOTE TO ORDERING ACTIVITIES: *If the best value selection places your order over the Maximum Order identified in this catalog/pricelist, you have an opportunity to obtain a better schedule contract price. Before placing your order, contact the aforementioned contactor for a better price. The contractor may (1) offer a new price for this requirement (2) offer the lowest price available under this contract or (3) decline the order. A delivery order that exceeds the maximum order may be placed under the schedule contract in accordance with FAR 8.404.

3. MINIMUM ORDER: $100

4. GEOGRAPHIC SCOPE OF CONTRACT: The minimum acceptable geographic scope of this contract is:

Domestic delivery is delivery within the 48 contiguous states, Alaska, Hawaii, Puerto Rico, Washington, DC, and U.S. Territories.

5. POINT(S) OF PRODUCTION: N/A SERVICES

6. DISCOUNT FROM LIST PRICES: Negotiated discount has been applied and the IFF has been added.

7. QUANITY DISCOUNT(S): 1% on orders of $100,000, 1.5% on orders of $150,000, 2.0% on orders of $300,000;

8. PROMPT PAYMENT TERMS: Net 30

10. FOREIGN ITEMS: N/A

11a. TIME OF DELIVERY: 30 days or Negotiated at the task order level.

11b. EXPEDITED DELIVERY: Items available for expedited delivery are noted in this price list or negotiated at the task order level.

11c. OVERNIGHT AND 2-DAY DELIVERY: Overnight and 2-day delivery are available.

Contact the Contractor for rates.

11d. URGENT REQUIRMENTS: Agencies can contact the Contractor’s representative to affect a faster delivery. Customers are encouraged to contact the contractor for the purpose of requesting accelerated delivery.

12. FOB POINT: Destination

13a. CONTRACTOR’S ORDERING ADDRESS AND PAYMENT INFORMATION:

The following telephone number(s) can be used by ordering agencies to obtain technical and/or ordering assistance:

Comptel, Inc.

2114 Tysons Executive Ct.

Dunn Loring, VA 22027 Phone: 703-582-7817 13b. ORDERING PROCEDURES: Ordering activities shall use the ordering procedures described in Federal Acquisition Regulation 8.405-3 when placing an order or establishing a BPA for supplies or services. The ordering procedures, information on Blanket Purchase Agreements (BPA’s) and a sample BPA can be found at the GSA/FSS Schedule Homepage (fss.gsa.gov/schedules).

14. PAYMENT ADDRESS: See 13a.

15. WARRANTY PROVISION: SCW

16. EXPORT PACKING CHARGES: N/A

17. TERMS AND CONDITIONS OF GOVERNMENT PURCHASE CARD ACCEPTANCE: SEE 9.b

18. TERMS AND CONDITIONS OF RENTAL, MAINTENANCE, AND REPAIR (IF APPLICABLE): N/A

19. TERMS AND CONDITIONS OF INSTALLATION (IF APPLICABLE): N/A

20. TERMS AND CONDITIONS OF REPAIR PARTS INDICATING DATE OF

PARTS PRICE LISTS AND ANY DISCOUNTS FROM LIST PRICES (IF AVAILABLE): N/A

20a. TERMS AND CONDITIONS FOR ANY OTHER SERVICES (IF APPLICABLE): N/A

21. LIST OF SERVICE AND DISTRIBUTION POINTS (IF APPLICABLE): N/A

22. LIST OF PARTICIPATING DEALERS (IF APPLICABLE): N/A

23. PREVENTIVE MAINTENANCE (IF APPLICABLE): N/A

24a. SPECIAL ATTRIBUTES SUCH AS ENVIRONMENTAL ATTRIBUTES (e.g.

recycled content, energy efficiency, and/or reduced pollutants): N/A

24b. Section 508 Compliance for Electronic and Information Technology (EIT): If applicable, Section 508 compliance will be adhered to.

The EIT standard can be found at: www.Section508.gov/.

25. CAGE Code: 1CJF9

PROFESSIONAL SERVICES (SPECIAL ITEM NUMBER 54151S)

****NOTE: All non-professional labor categories must be incidental to, and used solely to support professional services, and cannot be purchased separately.

1. SCOPE

a. The prices, terms and conditions stated under Special Item Number 54151S Information Technology Professional Services apply exclusively to IT Professional Services within the scope of this Information Technology Schedule.

b. The Contractor shall provide services at the Contractor’s facility and/or at the ordering activity location, as agreed to by the Contractor and the ordering activity.

2. PERFORMANCE INCENTIVES I-FSS-60 Performance Incentives (April 2000)

a. Performance incentives may be agreed upon between the Contractor and the ordering activity on individual fixed price orders or Blanket Purchase Agreements under this contract.

b. The ordering activity must establish a maximum performance incentive price for these services and/or total solutions on individual orders or Blanket Purchase Agreements.

c. Incentives should be designed to relate results achieved by the contractor to specified targets. To the maximum extent practicable, ordering activities shall consider establishing incentives where performance is critical to the ordering activity’s mission and incentives are likely to motivate the contractor. Incentives shall be based on objectively measurable tasks.

3. ORDER

a. Agencies may use written orders, EDI orders, blanket purchase agreements, individual purchase orders, or task orders for ordering services under this contract. Blanket Purchase Agreements shall not extend beyond the end of the contract period; all services and delivery shall be made and the contract terms and conditions shall continue in effect until the completion of the order. Orders for tasks which extend beyond the fiscal year for which funds are available shall include FAR 52.232-19 (Deviation – May 2003) Availability of Funds for the Next Fiscal Year. The purchase order shall specify the availability of funds and the period for which funds are available.

b. All task orders are subject to the terms and conditions of the contract. In the event of conflict between a task order and the contract, the contract will take precedence.

4. PERFORMANCE OF SERVICES

a. The Contractor shall commence performance of services on the date agreed to by the Contractor and the ordering activity.

b. The Contractor agrees to render services only during normal working hours, unless otherwise agreed to by the Contractor and the ordering activity.

c. The ordering activity should include the criteria for satisfactory completion for each task in the Statement of Work or Delivery Order. Services shall be completed in a good and workmanlike manner.

d. Any Contractor travel required in the performance of IT Services must comply with the Federal Travel Regulation or Joint Travel Regulations, as applicable, in effect on the date(s) the travel is performed. Established Federal Government per diem rates will apply to all Contractor travel. Contractors cannot use GSA city pair contracts.

TOP-WORK ORDER (FAR 52.242-15) (AUG 1989)

(a) The Contracting Officer may, at any time, by written order to the Contractor, require the Contractor to stop all, or any part, of the work called for by this contract for a period of 90 days after the order is delivered to the Contractor, and for any further period to which the parties may agree. The order shall be specifically identified as a stop-work order issued under this clause. Upon receipt of the order, the Contractor shall immediately comply with its terms and take all reasonable steps to minimize the incurrence of costs allocable to the work covered by the order during the period of work stoppage. Within a period of 90 days after a stopwork is delivered to the Contractor, or within any extension of that period to which the parties shall have agreed, the Contracting Officer shall either-

(1) Cancel the stop-work order; or

(2) Terminate the work covered by the order as provided in the Default, or the Termination for Convenience of the Government, clause of this contract.

(b) If a stop-work order issued under this clause is canceled or the period of the order or any extension thereof expires, the Contractor shall resume work. The Contracting Officer shall make an equitable adjustment in the delivery schedule or contract price, or both, and the contract shall be modified, in writing, accordingly, if-

(1) The stop-work order results in an increase in the time required for, or in the contractor's cost properly allocable to, the performance of any part of this contract; and

(2) The Contractor asserts its right to the adjustment within 30 days after the end of the period of work stoppage; provided that, if the Contracting Officer decides the facts justify the action, the Contracting Officer may receive and act upon the claim submitted at any time before final payment under this contract.

(c) If a stop-work order is not canceled and the work covered by the order is terminated for the convenience of the Government, the Contracting Officer shall allow reasonable costs resulting from the stop-work order in arriving at the termination settlement.

(d) If a stop-work order is not canceled and the work covered by the order is terminated for default, the Contracting Officer shall allow, by equitable adjustment or otherwise, reasonable costs resulting from the stop-work order.

6. INSPECTION OF SERVICES

In accordance with FAR 52.212-4 CONTRACT TERMS AND CONDITIONS-- COMMERCIAL ITEMS (MAR 2009) (DEVIATION I - FEB 2007) for Firm-Fixed Price orders and FAR 52.212-4 CONTRACT TERMS AND CONDITIONS COMMERCIAL ITEMS (MAR 2009) (ALTERNATE I OCT 2008) (DEVIATION I – FEB 2007) applies to Time-and-Materials and Labor-Hour Contracts orders placed under this contract.

7. RESPONSIBILITIES OF THE CONTRACTOR

The Contractor shall comply with all laws, ordinances, and regulations (Federal, State, City, or otherwise) covering work of this character. If the end product of a task order is software, then FAR 52.227-14 (Dec 2007) Rights in Data – General, may apply.

8. RESPONSIBILITIES OF THE ORDERING ACTIVITY

Subject to security regulations, the ordering activity shall permit Contractor access to all facilities necessary to perform the requisite IT Professional Services.

9. INDEPENDENT CONTRACTOR

All IT Professional Services performed by the Contractor under the terms of this contract shall be as an independent Contractor, and not as an agent or employee of the ordering activity.

10. ORGANIZATIONAL CONFLICTS OF INTEREST

a. Definitions.

“Contractor” means the person, firm, unincorporated association, joint venture, partnership, or corporation that is a party to this contract.

“Contractor and its affiliates” and “Contractor or its affiliates” refers to the Contractor, its chief executives, directors, officers, subsidiaries, affiliates, subcontractors at any tier, and consultants and any joint venture involving the Contractor, any entity into or with which the Contractor subsequently merges or affiliates, or any other successor or assignee of the Contractor.

An “Organizational conflict of interest” exists when he nature of the work to be performed under a proposed ordering activity contract, without some restriction on ordering activities by the Contractor and its affiliates, may either (i) result in an unfair competitive advantage to the Contractor or its affiliates or (ii) impair the Contractor’s or its affiliates’ objectivity in performing contract work.

b. To avoid an organizational or financial conflict of interest and to avoid prejudicing the best interests of the ordering activity, ordering activities may place restrictions on the Contractors, its affiliates, chief executives, directors, subsidiaries and subcontractors at any tier when placing orders against schedule contracts. Such restrictions shall be consistent with FAR 9.505 and shall be designed to avoid, neutralize, or mitigate organizational conflicts of interest that might otherwise exist in situations related to individual orders placed against the schedule contract. Examples of situations, which may require restrictions, are provided at FAR 9.508.

11. INVOICES

The Contractor, upon completion of the work ordered, shall submit invoices for IT Professional services. Progress payments may be authorized by the ordering activity on individual orders if appropriate. Progress payments shall be based upon completion of defined milestones or interim products. Invoices shall be submitted monthly for recurring services performed during the preceding month.

12. PAYMENTS

For firm-fixed price orders the ordering activity shall pay the Contractor, upon submission of proper invoices or vouchers, the prices stipulated in this contract for service rendered and accepted. Progress payments shall be made only when authorized by the order. For time-materials - materials orders, the Payments under Time-and-Materials and Labor-Hour Contracts at FAR 52.212-4 (MAR 2009) (ALTERNATE I – OCT 2008) (DEVIATION I – FEB 2007) applies to time-and-materials orders placed under this contract. For labor-hour orders, the Payment under Time-and-Materials and Labor-Hour Contracts at FAR 52.2124 (MAR 2009) (ALTERNATE I – OCT 2008) (DEVIATION I – FEB 2007) applies to labor-hour orders placed under this contract. 52.216-31(Feb 2007) Time-andMaterials/Labor-Hour Proposal Requirements—Commercial Item Acquisition. As prescribed in 16.601(e)(3), insert the following provision:

(a) The Government contemplates award of a Time-and-Materials or Labor-Hour type of contract resulting from this solicitation.

(b) The offeror must specify fixed hourly rates in its offer that include wages, overhead, general and administrative expenses, and profit. The offeror must specify whether the fixed hourly rate for each labor category applies to labor performed by—

(1) The offeror;

(2) Subcontractors; and/or

(3) Divisions, subsidiaries, or affiliates of the offeror under a common control.

13. RESUMES

Resumes shall be provided to the GSA Contracting Officer or the user ordering activity upon request.

14. INCIDENTAL SUPPORT COSTS

Incidental support costs are available outside the scope of this contract. The costs will be negotiated separately with the ordering activity in accordance with the guidelines set forth in the FAR.

15. APPROVAL OF SUBCONTRACTS

The ordering activity may require that the Contractor receive, from the ordering activity's Contracting Officer, written consent before placing any subcontract for furnishing any of the work called for in a task order.

16. DESCRIPTION OF IT PROFESSIONAL SERVICES AND PRICING

Please refer to the labor category descriptions and pricing incorporated into this GSA Pricelist.

LABOR CATEGORY DESCRIPTION FOR SIN 54151S

Substitution for Education: Due to the availability or limitation of education, occasionally substitution of experience and industry certifications as referenced below for a professional labor type with additional years of experience will be provided to ordering agency when responding to their IT requirements with the goal of providing the best matched talent. One year of experience shall substitute for one year of education. For example, an employee with no degree may meet the requirement of a Bachelor’s degree by utilizing 4 years of experience. An employee with an Associate's degree may meet the requirement of a Bachelor’s degree by utilizing their Associate's plus two years of experience. Master's degree requirement may be met by utilizing 6 years of experience; an Associate's plus 4 years of experience; or a Bachelor’s degree plus 2 years of experience. PhD requirements may be met with 8 years of experience; an Associate’s degree plus 6 years of experience; a Bachelor’s degree plus 4 years of experience; or a Master’s degree plus 2 years of experience. Substitution between education and experience is solely the acquiring agency’s determination if the substitution is considered acceptable prior to assigning the employee to the task.

PRICING FOR SIN 54151S