MAS - Vinsys Information Technology, Inc. - GS35F211GA

Authorized Federal Acquisition Service

Multiple Award Schedule (MAS)

Contract #: GS-35F-211GA

02/07/2017 – 02/06/2027

Authorized Federal Acquisition Service IT Schedule Pricelist Contract # GS35F211GA

Dated February 02 2024

Period Covered by Contract 2/7/17 – 2/6/2027

Special Item No. 54151S Information Technology Professional Services

FPDS Code D301 IT Facility Operation and Maintenance

FPDS Code D302 IT Systems Development Services

FPDS Code D306 IT Systems Analysis Services

FPDS Code D307 Automated Information Systems Design and Integration Services

FPDS Code D308 Programming Services

FPDS Code D310 IT Backup and Security Services

FPDS Code D311 IT Data Conversion Services

FPDS Code D313 Computer Aided Design/Computer Aided Manufacturing (CAD/CAM) Services

FPDS Code D316 IT Network Management Services

FPDS Code D317 Creation/Retrieval of IT Related Automated News Services, Data Services, or Other Information Services

(All other information services belong under Schedule 76)

FPDS Code D399 Other Information Technology Services, Not Elsewhere Classified

Special Item No. 54151HEAL Health IT Services

Cloud services (all associated labor

Cognitive computing

Conversion and implementation support

Database planning and design

Internet of Things (IoT)

IT project management

Migration services (of all kinds)

Network services

Programming

Resources and facilities management

Systems analysis, design, and implementation

Note 1: All non-professional labor categories must be incidental to and used solely to support hardware, software and/or professional services, and cannot be purchased separately.

Note 2: Offerors and Agencies are advised that the Group 70 – Information Technology Schedule is not to be used as a means to procure services which properly fall under the Brooks Act. These services include, but are not limited to, architecture, engineering, mapping, cartographic production, remote sensing, geographic information systems, and related services. FAR 36.6 distinguishes between mapping services of an A/E nature and mapping services which are not connected nor incidental to the traditionally accepted A/E Services.

Note 3: This solicitation is not intended to solicit for the reselling of IT Professional Services, except for the provision of implementation, maintenance, integration, or training services in direct support of a product.

Under such circumstances the services must be performance by the publisher or manufacturer or one of their authorized agents.

Special Item No. 511210 Term Software Licenses and Perpetual Software Licenses

Term Software Licenses

Software maintenance as a product includes the publishing of bug/defect fixes via patches and updates/upgrades in function and technology to maintain the operability and usability of the software product. It may also include other no charge support that are included in the purchase price of the product in the commercial marketplace. No charge support includes items such as user blogs, discussion forums, on-line help libraries and FAQs (Frequently Asked Questions), hosted chat rooms, and limited telephone, email and/or web-based general technical support for user’s self-diagnostics.

Software maintenance as a product does NOT include the creation, design, implementation, integration, etc. of a software package.

These examples are considered software maintenance as a service – which is categorized under a difference SIN (54151).

FSC CLASS 7030 - INFORMATION TECHNOLOGY SOFTWARE

Large Scale Computers

- Operating System Software

- Application Software

- Electronic Commerce (EC) Software

- Utility Software - Communications Software

- Core Financial Management Software

- Ancillary Financial Systems Software

- Special Physical, Visual, Speech, and Hearing Aid Software Microcomputers

- Operating System Software

- Application Software

- Electronic Commerce (EC) Software

- Utility Software - Communications Software

- Core Financial Management Software

- Ancillary Financial Systems Software

- Special Physical, Visual, Speech, and Hearing Aid Software

NOTE: Offerors are encouraged to identify within their software items any component interfaces that support open standard interoperability. An item’s interfaces may be identified as interoperable on the basis of participation in a Government agency-sponsored program or in an independent organization program. Interfaces may be identified by reference to an interface registered in the component registry located at http://www.core.gov.

Perpetual Software Licenses

Software maintenance as a product includes the publishing of bug/defect fixes via patches and updates/upgrades in function and technology to maintain the operability and usability of the software product. It may also include other no charge support that are included in the purchase price of the product in the commercial marketplace. No charge support includes items such as user blogs, discussion forums, on-line help libraries and FAQs (Frequently Asked Questions), hosted chat rooms, and limited telephone, email and/or web-based general technical support for user’s self-diagnostics.

Software maintenance as a product does NOT include the creation, design, implementation, integration, etc. of a software package.

These examples are considered software maintenance as a service.

FSC CLASS 7030 - INFORMATION TECHNOLOGY SOFTWARE

Large Scale Computers

- Operating System Software

- Application Software

- Electronic Commerce (EC) Software

- Utility Software - Communications Software

- Core Financial Management Software

- Ancillary Financial Systems Software

- Special Physical, Visual, Speech, and Hearing Aid Software Microcomputers

- Operating System Software Application Software

- Electronic Commerce (EC) Software Utility Software

- Communications Software - Core Financial Management Software Ancillary Financial Systems Software

- Special Physical, Visual, Speech, and Hearing Aid Software

NOTE: Offerors are encouraged to identify within their software items any component interfaces that support open standard interoperability. An item’s interface may be identified as interoperable on the basis of participation in a Government agency-sponsored program or in an independent organization program. Interfaces may be identified by reference to an interface registered in the component registry located at http://www.core.gov.

Special Item No. 54151 Maintenance of Software as a Service

Software maintenance as a service creates, designs, implements, and/or integrates customized changes to software that solve one or more problems and is not included with the price of the software. Software maintenance as a service includes person-to-person communications regardless of the medium used to communicate, telephone support, on- line technical support, customized support, and/or technical expertise which are charged commercially.

Software maintenance as a service is billed arrears in accordance with 31 U.S.C. 3324.

SPECIAL ITEM NUMBER 611420 - TRAINING COURSES

Includes training.

NOTE: This SIN can only be used to offer Information Technology Training Courses.

FSC/PSC Class U012 EDUCATION/TRAINING- INFORMATION TECHNOLOGY/TELECOMMUNICATIONS

TRAINING

Training Courses for Information Technology Equipment and Software

Special Item No. 54151HACS – Cyber Security

Cybersecurity is the ability to protect or defend the use of cyberspace from cyber-attacks. Cybersecurity is an umbrella term that incorporates different information technology (IT) strategies that protect networks (e.g., identity management, risk management, incident management, and privacy). Information Assurance employs measures that protect and defend information and information systems by ensuring their availability, integrity, authentication, confidentiality, and non-repudiation. These measures include providing for restoration of information systems by incorporating protection, detection, and reaction capabilities. As IT has continued to evolve, so have the threats to data security, individual privacy, and the continued operation of the Federal

Government’s IT assets.

518210C Cloud Computing and Cloud Related IT Professional Services

Includes commercially available cloud computing services such as Infrastructure as a Service (Iaa S), Platform as a Service

(Paa S), and Software as a Service (Saa S) and emerging cloud services. IT professional services that are focused on providing the types of services that support the Government ’s adoption of, migration to or governance/management of Cloud computing. Specific labor categories and/or fixed price solutions (e.g. migration services, etc.) that support activities associated with assessing Cloud solutions, refactoring workloads for Cloud solutions, migrating legacy or other systems to

Cloud solutions, providing management/governance of Cloud solutions, DevOps, developing cloud native applications or other

Cloud oriented activities.

NOTE: Subject to Cooperative Purchasing

FSC/PSC Class D305 IT AND TELECOM- TELEPROCESSING, TIMESHARE, AND CLOUD COMPUTING Cloud

Computing Services

Vinsys Information Technology Inc

44330 Mercure Circle, Suite#254

Dulles, Virginia. 20166

Phone: 703-371-4120

Fax: 703-880-7557 partner@vinsysinfo.com

Attn: Sreedhar Chanamolu

Products and ordering information in this Authorized Information Technology Schedule Pricelist are also available on the GSA

Advantage! System (http://www.gsaadvantage.gov).

http://www.gsaadvantage.gov/

TABLE OF CONTENTS

INFORMATION FOR ORDERING ACTIVITIES APPLICABLE TO ALL SPECIAL

ITEM NUMBERS

TERMS AND CONDITIONS APPLICABLE TO INFORMATION TECHNOLOGY (IT)

PROFESSIONAL SERVICES AND HEALTH IT SERVICES (SPECIAL ITEM

NUMBER 54151S, 54151HACS , 54151HEAL, and 518210C)

TERMS AND CONDITIONS APPLICABLE TO IT PROFESSIONAL SERVICES

(SPECIAL IDENTIFICATION NUMBER 54151S

TERMS AND CONDITIONS APPLICABLE TO HEALTH IT SERVICES (SPECIAL

IDENTIFICATION NUMBER 54151HEAL)

TERMS AND CONDITIONS APPLICABLE TO TERM SOFTWARE LICENSES,

PERPETUAL SOFTWARE LICENSES (SPECIAL ITEM NUMBER 511210) AND

MAINTENANCE AS A SERVICE (SPECIAL ITEM NUMBER 54151) OF GENERAL-

PURPOSE COMMERCIAL INFORMATION TECHNOLOGY SOFTWARE

TERMS AND CONDITIONS APPLICABLE TO PURCHASE OF TRAINING COURSES

FOR GENERAL PURPOSE COMMERCIAL INFORMATION TECHNOLOGY

EQUIPMENT AND SOFTWARE (SPECIAL ITEM NUMBER 611420)

USA COMMITMENT TO PROMOTE SMALL BUSINESS PARTICIPATION

PROCUREMENT PROGRAMS

BEST VALUE

BLANKET PURCHASE AGREEMENT

FEDERAL SUPPLY SCHEDULE

BASIC GUIDELINES FOR USING “CONTRACTOR TEAM ARRANGEMENTS”

INFORMATION FOR ORDERING ACTIVITIES APPLICABLE TO ALL SPECIAL ITEM NUMBERS

SPECIAL NOTICE TO AGENCIES: Small Business Participation

SBA strongly supports the participation of small business concerns in the Federal Acquisition Service. To enhance Small

Business Participation SBA policy allows agencies to include in their procurement base and goals, the dollar value of orders expected to be placed against the Federal Supply Schedules, and to report accomplishments against these goals.

For orders exceeding the micropurchase threshold, FAR 8.404 requires agencies to consider the catalogs/pricelists of at least three schedule contractors or consider reasonably available information by using the GSA Advantage! on-line shopping service

(www.gsaadvantage.gov). The catalogs/pricelists, GSA Advantage! and the Federal Acquisition Service Home Page

(www.gsa.gov/fas) contain information on a broad array of products and services offered by small business concerns.

This information should be used as a tool to assist ordering activities in meeting or exceeding established small business goals. It should also be used as a tool to assist in including small, small disadvantaged, and women-owned small businesses among those considered when selecting pricelists for a best value determination.

For orders exceeding the micropurchase threshold, customers are to give preference to small business concerns when two or more items at the same delivered price will satisfy their requirement.

1. GEOGRAPHIC SCOPE OF CONTRACT

Domestic delivery is delivery within the 48 contiguous states, Alaska, Hawaii, Puerto Rico, Washington, DC, and U.S.

Territories. Domestic delivery also includes a port or consolidation point, within the aforementioned areas, for orders received from overseas activities.

Overseas delivery is delivery to points outside of the 48 contiguous states, Washington, DC, Alaska, Hawaii, Puerto Rico, and

U.S. Territories.

Offerors are requested to check one of the following boxes:

[ ] The Geographic Scope of Contract will be domestic and overseas delivery.

[ ] The Geographic Scope of Contract will be overseas delivery only.

[X] The Geographic Scope of Contract will be domestic delivery only.

2. CONTRACTOR’S ORDERING ADDRESS AND PAYMENT INFORMATION

Vinsys Information Technology Inc 44330 Mercure Circle, Suite#254, Dulles, Virginia. 20166. Phone: 703-371-4120

Fax: 703-880-7557; partner@vinsysinfo.com

Contractor must accept the credit card for payments equal to or less than the micro-purchase for oral or written orders under this contract. The Contractor and the ordering agency may agree to use the credit card for dollar amounts over the micro-purchase threshold (See GSAR 552.232-79 Payment by Credit Card). In addition, bank account information for wire transfer payments will be shown on the invoice. The following telephone number(s) can be used by ordering activities to obtain technical and/or ordering assistance: 703-371-4120

3. LIABILITY FOR INJURY OR DAMAGE

The Contractor shall not be liable for any injury to ordering activity personnel or damage to order activity property arising from the use of equipment maintained by the Contractor, unless such injury or damage is due to the fault or negligence of the Contractor.

Dated June 28, 2019

Period Covered by Contract 2/7/17 – 2/6/2022

Dated

Period Covered by Contract 2/7/17 – 2/6/2

4. STATISTICAL DATA FOR GOVERNMENT ORDERING OFFICE COMPLETION OF STANDARD

FORM 279

Block 9: G. Order/Modification Under Federal Schedule Contract

Block 16: Data Numbering System (DUNS) Number: 145153560

Block 30: Type of Contractor: B. Other Small Business, SBA 8(a)

Block 31: Woman-Owned Small Business - No

Block 37: Contractor's Taxpayer Identification Number (TIN): 20-0388747

a. CAGE Code: 6PWX3

b. Contractor has registered with the Central Contractor Registration Database.

5. FOB DESTINATION

6. DELIVERY SCHEDULE

a. TIME OF DELIVERY: The Contractor shall deliver to destination within the number of calendar days after receipt of order (ARO), as set forth below:

SPECIAL ITEM NUMBER DELIVERY TIME (Days ARO)

54151S, 54151HEAL As Negotiated

b. URGENT REQUIREMENTS: When the Federal Supply Schedule contract delivery period does not meet the bona fide urgent delivery requirements of an ordering activity, ordering activities are encouraged, if time permits, to contact the

Contractor for the purpose of obtaining accelerated delivery. The Contractor shall reply to the inquiry within 3 workdays after receipt. (Telephonic replies shall be confirmed by the Contractor in writing.) If the Contractor offers an accelerated delivery time acceptable to the ordering activity, any order(s) placed pursuant to the agreed upon accelerated delivery time frame shall be delivered within this shorter delivery time and in accordance with all other terms and conditions of the contract.

7. DISCOUNTS

Prices shown are NET Prices; Basic Discounts have been deducted.

a. Prompt Payment: None

b. Quantity: None

c. Dollar Volume: None

d. Other Special Discounts (i.e. Government Education Discounts, etc.): None

8. TRADE AGREEMENTS ACT OF 1979, as amended

All items are U.S. made end products, designated country end products, Caribbean Basin country end products, Canadian end products, or Mexican end products as defined in the Trade Agreements Act of 1979, as amended.

9. STATEMENT CONCERNING AVAILABILITY OF EXPORT PACKING

10. SMALL REQUIREMENTS

The minimum dollar of orders to be issued is $100.00

11. MAXIMUM ORDER

All dollar amounts are exclusive of any discount for prompt payment.

a. The Maximum Order for the following Special Item Numbers (SINs) is $500,000:

Special Item Number 54151S - Information Technology Professional Services

Special Item Number 54151HEAL – Health Information Technology Services

Special Item Number 518210C - Cloud Computing and Cloud Related IT Professional Services

Dated February 02, 2024

Period Covered by Contract 2/7/17 – 02/7/2027.

Special Item Number 54151HACS – Cyber Security

Special Item No. 70-500 Order-Level Materials

12. ORDERING PROCEDURES FOR FEDERAL SUPPLY SCHEDULE CONTRACTS

Ordering activities shall use the ordering procedures of Federal Acquisition Regulation (FAR) 8.405 when placing an order or establishing a BPA for supplies or services. These procedures apply to all schedules.

a. FAR 8.405-1 Ordering procedures for supplies, and services not requiring a statement of work.

b. FAR 8.405-2 Ordering procedures for services requiring a statement of work.

13. FEDERAL INFORMATION TECHNOLOGY/TELECOMMUNICATION STANDARDS REQUIREMENTS

Ordering activities acquiring products from this Schedule must comply with the provisions of the Federal Standards Program, as appropriate (reference: NIST Federal Standards Index). Inquiries to determine whether specific products listed herein comply with Federal Information Processing Standards (FIPS) or Federal Telecommunication Standards (FED-STDS), which are cited by ordering activities, shall be responded to promptly by the Contractor.

13.1 FEDERAL INFORMATION PROCESSING STANDARDS PUBLICATIONS (FIPS PUBS): Information

Technology products under this Schedule that do not conform to Federal Information Processing Standards (FIPS) should not be acquired unless a waiver has been granted in accordance with the applicable "FIPS Publication." Federal Information

Processing Standards Publications (FIPS PUBS) are issued by the U.S. Department of Commerce, National Institute of

Standards and Technology (NIST), pursuant to National Security Act. Information concerning their availability and applicability should be obtained from the National Technical Information Service (NTIS), 5285 Port Royal Road, Springfield, Virginia 22161. FIPS PUBS include voluntary standards when these are adopted for Federal use. Individual orders for FIPS PUBS should be referred to the NTIS Sales Office, and orders for subscription service should be referred to the NTIS Subscription Officer, both at the above address, or telephone number (703) 487-4650.

13.2 FEDERAL TELECOMMUNICATION STANDARDS (FED-STDS): Telecommunication products under this

Schedule that does not conform to Federal Telecommunication Standards (FED-STDS) should not be acquired unless a waiver has been granted in accordance with the applicable "FED-STD." Federal Telecommunication Standards are issued by the U.S. Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security

Act. Ordering information and information concerning the availability of FED-STDS should be obtained from the GSA, Federal Acquisition Service, Specification Section, 470 East L’Enfant Plaza, Suite 8100, SW, Washington, DC 20407, telephone number (202)619-8925. Please include a self-addressed mailing label when requesting information by mail.

Information concerning their applicability can be obtained by writing or calling the U.S. Department of Commerce, National

Institute of Standards and Technology, Gaithersburg, MD 20899, telephone number (301)975-2833.

14. CONTRACTOR TASKS / SPECIAL REQUIREMENTS (C-FSS-370) (NOV 2003)

a. Security Clearances: The Contractor may be required to obtain/possess varying levels of security clearances in the performance of orders issued under this contract. All costs associated with obtaining/possessing such security clearances should be factored into the price offered under the Multiple Award Schedule.

b. Travel: The Contractor may be required to travel in performance of orders issued under this contract. Allowable travel and per diem charges are governed by Pub.L. 99-234 and FAR Part 31 and are reimbursable by the ordering agency or can be priced as a fixed price item on orders placed under the Multiple Award Schedule. Travel in performance of a task order will only be reimbursable to the extent authorized by the ordering agency. The Industrial Funding Fee does NOT apply to travel and per diem charges.

c. Certifications, Licenses and Accreditations: As a commercial practice, the Contractor may be required to obtain/possess any variety of certifications, licenses and accreditations for specific FSC/service code classifications offered.

All costs associated with obtaining/ possessing such certifications, licenses and accreditations should be factored into the price offered under the Multiple Award Schedule program.

Period Covered by Contract 2/7/17 –2/7/2027

000000\\\\\\\\\00022022/6/2022.

d. Insurance: As a commercial practice, the Contractor may be required to obtain/possess insurance coverage for specific FSC/service code classifications offered. All costs associated with obtaining/possessing such insurance should be factored into the price offered under the Multiple Award Schedule program.

e. Personnel: The Contractor may be required to provide key personnel, resumes or skill category descriptions in the performance of orders issued under this contract. Ordering activities may require agency approval of additions or replacements to key personnel.

f. Organizational Conflicts of Interest: Where there may be an organizational conflict of interest as determined by the ordering agency, the Contractor’s participation in such order may be restricted in accordance with FAR Part 9.5.

g. Documentation/Standards: The Contractor may be requested to provide products or services in accordance with rules, regulations, OMB orders, standards and documentation as specified by the agency’s order.

h. Data/Deliverable Requirements: Any required data/deliverables at the ordering level will be as specified or negotiated in the agency’s order.

i. Government-Furnished Property: As specified by the agency’s order, the Government may provide property, equipment, materials or resources as necessary.

j. Availability of Funds: Many Government agencies’ operating funds are appropriated for a specific fiscal year.

Funds may not be presently available for any orders placed under the contract or any option year. The Government’s obligation on orders placed under this contract is contingent upon the availability of appropriated funds from which payment for ordering purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are available to the ordering Contracting Officer.

k. Overtime: For professional services, the labor rates in the Schedule should not vary by virtue of the Contractor having worked overtime. For services applicable to the Service Contract Act (as identified in the Schedule), the labor rates in the Schedule will vary as governed by labor laws (usually assessed a time and a half of the labor rate).

15. CONTRACT ADMINISTRATION FOR ORDERING ACTIVITIES

Any ordering activity, with respect to any one or more delivery orders placed by it under this contract, may exercise the same rights of termination as might the GSA Contracting Officer under provisions of FAR 52.212-4, paragraphs (l) Termination for the ordering activity’s convenience, and (m) Termination for Cause (See 52.212-4)

16. GSA ADVANTAGE!

GSA Advantage! is an on-line, interactive electronic information and ordering system that provides on-line access to vendors' schedule prices with ordering information. GSA Advantage! will allow the user to perform various searches across all contracts including, but not limited to:

(1) Manufacturer;

(2) Manufacturer's Part Number; and

(3) Product categories.

Agencies can browse GSA Advantage! by accessing the Internet World Wide Web utilizing a browser (ex.: NetScape). The

Internet address is http://www.gsaadvantage.gov.

17. PURCHASE OF OPEN MARKET ITEMS

NOTE: Open Market Items are also known as incidental items, noncontract items, non-Schedule items, and items not on a

Federal Supply Schedule contract. Ordering Activities procuring open market items must follow FAR 8.402(f).

For administrative convenience, an ordering activity contracting officer may add items not on the Federal Supply Multiple

Award Schedule (MAS) -- referred to as open market items -- to a Federal Supply Schedule blanket purchase agreement

(BPA) or an individual task or delivery order, only if-

(1) All applicable acquisition regulations pertaining to the purchase of the items not on the Federal Supply

Schedule have been followed (e.g., publicizing (Part 5), competition requirements (Part 6), acquisition of commercial items (Part 12), contracting methods (Parts 13, 14, and 15), and small business programs (Part

19));

(2) The ordering activity contracting officer has determined the price for the items not on the Federal Supply

Schedule is fair and reasonable;

(3) The items are clearly labeled on the order as items not on the Federal Supply Schedule; and

(4) All clauses applicable to items not on the Federal Supply Schedule are included in the order.

18. CONTRACTOR COMMITMENTS, WARRANTIES AND REPRESENTATIONS

a. For the purpose of this contract, commitments, warranties and representations include, in addition to those agreed to for the entire schedule contract:

(1) Time of delivery/installation quotations for individual orders;

(2) Technical representations and/or warranties of products concerning performance, total system performance and/or configuration, physical, design and/or functional characteristics and capabilities of a product/equipment/ service/software package submitted in response to requirements which result in orders under this schedule contract.

(3) Any representations and/or warranties concerning the products made in any literature, description, drawings and/or specifications furnished by the Contractor.

b. The above is not intended to encompass items not currently covered by the GSA Schedule contract.

c. The maintenance/repair service provided is the standard commercial terms and conditions for the type of products and/or services awarded.

19. OVERSEAS ACTIVITIES

The terms and conditions of this contract shall apply to all orders for installation, maintenance and repair of equipment in areas listed in the pricelist outside the 48 contiguous states and the District of Columbia, except as indicated below:

Domestic Delivery Only

Upon request of the Contractor, the ordering activity may provide the Contractor with logistics support, as available, in accordance with all applicable ordering activity regulations. Such ordering activity support will be provided on a reimbursable basis and will only be provided to the Contractor's technical personnel whose services are exclusively required for the fulfillment of the terms and conditions of this contract.

20. BLANKET PURCHASE AGREEMENTS (BPAs)

The use of BPAs under any schedule contract to fill repetitive needs for supplies or services is allowable. BPAs may be established with one or more schedule contractors. The number of BPAs to be established is within the discretion of the ordering activity establishing the BPA and should be based on a strategy that is expected to maximize the effectiveness of the

BPA(s). Ordering activities shall follow FAR 8.405-3 when creating and implementing BPA(s).

21. CONTRACTOR TEAM ARRANGEMENTS

Contractors participating in contractor team arrangements must abide by all terms and conditions of their respective contracts. This includes compliance with Clauses 552.238-74, Industrial Funding Fee and Sales Reporting, i.e., each contractor (team member) must report sales and remit the IFF for all products and services provided under its individual contract.

22. INSTALLATION, DEINSTALLATION, REINSTALLATION

The Davis-Bacon Act (40 U.S.C. 276a-276a-7) provides that contract in excess of $2,000 to which the United States or the

District of Columbia is a party for construction, alteration, or repair (including painting and decorating) of public buildings or public works with the United States, shall contain a clause that no laborer or mechanic employed directly upon the site of the work shall receive less than the prevailing wage rates as determined by the Secretary of Labor. The requirements of the

Davis-Bacon Act do not apply if the construction work is incidental to the furnishing of supplies, equipment, or services. For example, the requirements do not apply to simple installation or alteration of a public building or public work that is incidental to furnishing supplies or equipment under a supply contract. However, if the construction, alteration or repair is segregable and exceeds $2,000, then the requirements of the Davis-Bacon Act apply.

23. SECTION 508 COMPLIANCE.

I certify that in accordance with 508 of the Rehabilitation Act of 1973, as amended (29 U.S.C. 794d), FAR 39.2, and the

Architectural and Transportation Barriers Compliance Board Electronic and Information Technology (EIT) Accessibility

Standards (36 CFR 1194) General Services Administration (GSA), that all IT hardware/software/services are 508 compliant:

Yes X

The offeror is required to submit with its offer a designated area on its website that outlines the Voluntary Product

Accessibility Template (VPAT) or equivalent qualification, which ultimately becomes the Government Product Accessibility

Template (GPAT). Section 508 compliance information on the supplies and services in this contract are available at the following website address (URL): www.vinsysinfo.com.

The EIT standard can be found at: www.Section508.gov/.

24. PRIME CONTRACTOR ORDERING FROM FEDERAL SUPPLY SCHEDULES.

Prime Contractors (on cost reimbursement contracts) placing orders under Federal Supply Schedules, on behalf of an ordering activity, shall follow the terms of the applicable schedule and authorization and include with each order

(a) A copy of the authorization from the ordering activity with whom the contractor has the prime contract

(unless a copy was previously furnished to the Federal Supply Schedule contractor); and (b) The following statement:

This order is placed under written authorization from _______ dated _______. In the event of any inconsistency between the terms and conditions of this order and those of your Federal Supply Schedule contract, the latter will govern.

25. INSURANCE—WORK ON A GOVERNMENT INSTALLATION (JAN 1997) (FAR 52.228-5)

(a) The Contractor shall, at its own expense, provide and maintain during the entire performance of this contract, at least the kinds and minimum amounts of insurance required in the Schedule or elsewhere in the contract.

(b) Before commencing work under this contract, the Contractor shall notify the Contracting Officer in writing that the required insurance has been obtained. The policies evidencing required insurance shall contain an endorsement to the effect that any cancellation or any material change adversely affecting the Government's interest shall not be effective—

(1) For such period as the laws of the State in which this contract is to be performed prescribe; or

(2) Until 30 days after the insurer or the Contractor gives written notice to the Contracting Officer, whichever period is longer.

(c) The Contractor shall insert the substance of this clause, including this paragraph (c), in subcontracts under this contract that require work on a Government installation and shall require subcontractors to provide and maintain the insurance required in the Schedule or elsewhere in the contract. The Contractor shall maintain a copy of all subcontractors' proofs of required insurance and shall make copies available to the Contracting Officer upon request.

26. SOFTWARE INTEROPERABILITY.

Offerors are encouraged to identify within their software items any component interfaces that support open standard interoperability. An item’s interface may be identified as interoperable on the basis of participation in a Government agency-sponsored program or in an independent organization program. Interfaces may be identified by reference to an interface registered in the component registry located at http://www.core.gov.

http://www.vinsysinfo.com/ http://www.vinsysinfo.com/ http://www.section508.gov/ http://www.section508.gov/ http://www.core.gov/ http://www.core.gov/ http://www.core.gov/

27. ADVANCE PAYMENTS

A payment under this contract to provide a service or deliver an article for the United States Government may not be more than the value of the service already provided or the article already delivered. Advance or pre-payment is not authorized or allowed under this contract. (31 U.S.C. 3324)

TERMS AND CONDITIONS APPLICABLE TO INFORMATION TECHNOLOGY (IT) PROFESSIONAL

SERVICES AND HEALTH IT SERVICES (SPECIAL ITEM NUMBER 54151S, 54151HACS, 54151HEAL, and 518210C)

1. SCOPE

a. The prices, terms and conditions stated under Special Item Numbers 54151S, 54151HACS, 54151HEAL, 518210C

Information Technology Professional Services apply exclusively to IT Professional Services within the scope of this

Information Technology Schedule.

b. The Contractor shall provide services at the Contractor’s facility and/or at the ordering activity location, as agreed to by the Contractor and the ordering activity.

2. PERFORMANCE INCENTIVES I-FSS-60 Performance Incentives (April 2000)

a. Performance incentives may be agreed upon between the Contractor and the ordering activity on individual fixed price orders or Blanket Purchase Agreements under this contract.

b. The ordering activity must establish a maximum performance incentive price for these services and/or total solutions on individual orders or Blanket Purchase Agreements.

c. Incentives should be designed to relate results achieved by the contractor to specified targets. To the maximum extent practicable, ordering activities shall consider establishing incentives where performance is critical to the ordering activity’s mission and incentives are likely to motivate the contractor. Incentives shall be based on objectively measurable tasks.

3. ORDER

a. Agencies may use written orders, EDI orders, blanket purchase agreements, individual purchase orders, or task orders for ordering services under this contract. Blanket Purchase Agreements shall not extend beyond the end of the contract period; all services and delivery shall be made, and the contract terms and conditions shall continue in effect until the completion of the order. Orders for tasks which extend beyond the fiscal year for which funds are available shall include

FAR 52.232-19 (Deviation – May 2003) Availability of Funds for the Next Fiscal Year. The purchase order shall specify the availability of funds and the period for which funds are available.

b. All task orders are subject to the terms and conditions of the contract. In the event of conflict between a task order and the contract, the contract will take precedence.

4. PERFORMANCE OF SERVICES

a. The Contractor shall commence performance of services on the date agreed to by the Contractor and the ordering activity.

b. The Contractor agrees to render services only during normal working hours, unless otherwise agreed to by the

Contractor and the ordering activity.

c. The ordering activity should include the criteria for satisfactory completion for each task in the Statement of Work or Delivery Order. Services shall be completed in a good and workmanlike manner.

d. Any Contractor travel required in the performance of IT Services must comply with the Federal Travel Regulation or Joint Travel Regulations, as applicable, in effect on the date(s) the travel is performed. Established Federal

Government per diem rates will apply to all Contractor travel. Contractors cannot use GSA city pair contracts.

5. STOP-WORK ORDER (FAR 52.242-15) (AUG 1989)

(a) The Contracting Officer may, at any time, by written order to the Contractor, require the Contractor to stop all, or any part, of the work called for by this contract for a period of 90 days after the order is delivered to the Contractor, and for any further period to which the parties may agree. The order shall be specifically identified as a stop-work order issued under this clause. Upon receipt of the order, the Contractor shall immediately comply with its terms and take all reasonable steps to minimize the incurrence of costs allocable to the work covered by the order during the period of work stoppage. Within a period of 90 days after a stop-work is delivered to the Contractor, or within any extension of that period to which the parties shall have agreed, the Contracting Officer shall either-

(1) Cancel the stop-work order; or

(2) Terminate the work covered by the order as provided in the Default, or the Termination for Convenience of the Government, clause of this contract.

(b) If a stop-work order issued under this clause is canceled or the period of the order or any extension thereof expires, the Contractor shall resume work. The Contracting Officer shall make an equitable adjustment in the delivery schedule or contract price, or both, and the contract shall be modified, in writing, accordingly, if-

(1) The stop-work order results in an increase in the time required for, or in the Contractor's cost properly allocable to, the performance of any part of this contract; and

(2) The Contractor asserts its right to the adjustment within 30 days after the end of the period of work stoppage; provided, that, if the Contracting Officer decides the facts justify the action, the Contracting Officer may receive and act upon the claim submitted at any time before final payment under this contract.

(c) If a stop-work order is not canceled and the work covered by the order is terminated for the convenience of the

Government, the Contracting Officer shall allow reasonable costs resulting from the stop-work order in arriving at the termination settlement.

(d) If a stop-work order is not canceled and the work covered by the order is terminated for default, the Contracting

Officer shall allow, by equitable adjustment or otherwise, reasonable costs resulting from the stop-work order.

6. INSPECTION OF SERVICES

In accordance with FAR 52.212-4 CONTRACT TERMS AND CONDITIONS--COMMERCIAL ITEMS (MAR 2009)

(DEVIATION I - FEB 2007) for Firm-Fixed Price orders and FAR 52.212-4 CONTRACT TERMS AND CONDITIONS

COMMERCIAL ITEMS (MAR 2009) (ALTERNATE I OCT 2008) (DEVIATION I – FEB 2007) applies to Time-and-

Materials and Labor-Hour Contracts orders placed under this contract.

7. RESPONSIBILITIES OF THE CONTRACTOR

The Contractor shall comply with all laws, ordinances, and regulations (Federal, State, City, or otherwise) covering work of this character. If the product of a task order is software, then FAR 52.227-14 (Dec 2007) Rights in Data – General, may apply.

8. RESPONSIBILITIES OF THE ORDERING ACTIVITY

Subject to security regulations, the ordering activity shall permit Contractor access to all facilities necessary to perform the requisite IT Professional Services.

9. INDEPENDENT CONTRACTOR

All IT Professional Services performed by the Contractor under the terms of this contract shall be as an independent

Contractor, and not as an agent or employee of the ordering activity.

10. ORGANIZATIONAL CONFLICTS OF INTEREST

a. Definitions.

“Contractor” means the person, firm, unincorporated association, joint venture, partnership, or corporation that is a party to this contract.

“Contractor and its affiliates” and “Contractor or its affiliates” refer to the Contractor, its chief executives, directors, officers, subsidiaries, affiliates, subcontractors at any tier, and consultants and any joint venture involving the Contractor, any entity into or with which the Contractor subsequently merges or affiliates, or any other successor or assignee of the Contractor.

An “Organizational conflict of interest” exists when the nature of the work to be performed under a proposed ordering activity contract, without some restriction on ordering activities by the Contractor and its affiliates, may either (i) result in an unfair competitive advantage to the Contractor or its affiliates or (ii) impair the Contractor’s or its affiliates’ objectivity in performing contract work.

b. To avoid an organizational or financial conflict of interest and to avoid prejudicing the best interests of the ordering activity, ordering activities may place restrictions on the Contractors, its affiliates, chief executives, directors, subsidiaries and subcontractors at any tier when placing orders against schedule contracts. Such restrictions shall be consistent with FAR 9.505 and shall be designed to avoid, neutralize, or mitigate organizational conflicts of interest that might otherwise exist in situations related to individual orders placed against the schedule contract. Examples of situations, which may require restrictions, are provided at FAR 9.508.

11. INVOICES

The Contractor, upon completion of the work ordered, shall submit invoices for IT Professional services. Progress payments may be authorized by the ordering activity on individual orders if appropriate. Progress payments shall be based upon completion of defined milestones or interim products. Invoices shall be submitted monthly for recurring services performed during the preceding month.

12. PAYMENTS

For firm-fixed price orders the ordering activity shall pay the Contractor, upon submission of proper invoices or vouchers, the prices stipulated in this contract for service rendered and accepted. Progress payments shall be made only when authorized by the order. For time-and-materials orders, the Payments under Time-and-Materials and Labor-Hour Contracts at FAR

52.212-4 (MAR 2009) (ALTERNATE I – OCT 2008) (DEVIATION I – FEB 2007) applies to time-and-materials orders placed under this contract. For labor-hour orders, the Payment under Time-and-Materials and Labor-Hour Contracts at FAR

52.212-4 (MAR 2009) (ALTERNATE I – OCT 2008) (DEVIATION I – FEB 2007) applies to labor-hour orders placed under this contract. 52.216-31(Feb 2007) Time-and Materials/Labor-Hour Proposal Requirements—Commercial Item

Acquisition. As prescribed in 16.601(e)(3), insert the following provision:

(a) The Government contemplates award of a Time-and-Materials or Labor-Hour type of contract resulting from this solicitation. (b) The offeror must specify fixed hourly rates in its offer that include wages, overhead, general and administrative expenses, and profit. The offeror must specify whether the fixed hourly rate for each labor category applies to labor performed by—

(1) The offeror;

(2) Subcontractors; and/or

(3) Divisions, subsidiaries, or affiliates of the offeror under a common control.

13. RESUMES

Resumes shall be provided to the GSA Contracting Officer or the user ordering activity upon request.

14. INCIDENTAL SUPPORT COSTS

Incidental support costs are available outside the scope of this contract. The costs will be negotiated separately with the ordering activity in accordance with the guidelines set forth in the FAR.

15. APPROVAL OF SUBCONTRACTS

The ordering activity may require that the Contractor receive, from the ordering activity's Contracting Officer, written consent before placing any subcontract for furnishing any of the work called for in a task order.

16. DESCRIPTION OF IT PROFESSIONAL SERVICES AND PRICING

a. The Contractor shall provide a description of each type of IT/IAM Service offered under Special Item Numbers

54151S IT Professional Services, 54151HACS Cyber Security services, 518210C Cloud Computing and Cloud

Related IT Professional Services and 54151HEAL Health IT Services should be presented in the same manner as the

Contractor sells to its commercial and other ordering activity customers. If the Contractor is proposing hourly rates, a description of all corresponding commercial job titles (labor categories) for those individuals who will perform the service should be provided.

b. Pricing for all IT/IAM Professional Services shall be in accordance with the Contractor’s customary commercial practices; e.g., hourly rates, monthly rates, term rates, and/or fixed prices, minimum general experience and minimum education.

LABOR CATEGORIES

Labor Category Descriptions

Lead Java Developer

Under general supervision, assists in research and fact-finding to develop or modify information systems. Assists in preparing detailed specifications from which programs will be written. Designs, codes, tests, debugs, documents and maintains those programs. Minimum/General Minimum/General Experience: 8 years

Minimum Education Requirements: BA

Senior Quality Analyst

Under general supervision develops testing guidelines and policies, baseline requirements and test plans. Ensures developed functional software components fully implement baseline requirements possible. Provides requirements analysis, development of test plans, procedures, scripts and reports. Responsibility: Only for specific programs assigned.

Minimum/General Minimum/General Experience: 8 years

Solutions Architect

Provides technical knowledge and analysis of specialized applications and operational environments, high-level functional systems analysis, design, integration, documentation, and implementation advice on exceptionally complex problems that necessitate high level knowledge of the subject matter for effective implementation. Participates as needed in all phases of software development with emphasis on the planning, analysis, modeling, simulation, testing, integration, documentation and presentation phases.

Minimum/General Experience: 8 years

Oracle DBA

Under direct supervision, administers, and troubleshoots relational databases. Responsible for daily database function to include backup and recovery as well as disaster planning. Responsible for designing code and providing development support as needed. Supports and assists in the development of applications. Responsibility: Specific aspects of assigned projects. Minimum/General Experience: 8 years

Software Configuration Manager:

Provides technical/management leadership on major tasks or technology assignments. Establishes goals and plans that meet project objectives. Has domain and expert technical knowledge.

Directs and controls activities for a client, having overall responsibility for financial management, methods, and staffing to ensure that technical requirements are met. Interactions involve client negotiations and interfacing with senior management.

Minimum/General Experience: 10 years

Senior C++ Developer

Under general supervision, assists in research and fact-finding to develop or modify information systems. Assists in research and factfinding to develop or modify information systems. Assists in preparing detailed specifications from which programs will be written. Designs, codes, tests, debugs, documents and maintains those programs.

Minimum/General Experience: 7 years

Senior DevOps Engineer

Provides technical knowledge and analysis of specialized applications and operational environments, high-level functional systems analysis, design, integration, documentation, and implementation advice on exceptionally complex problems that necessitate high-level knowledge of the subject matter for effective implementation. Participates as needed in all phases of software development with emphasis on the planning, analysis, modeling, simulation, testing, integration, documentation and presentation phases. Minimum/General Experience: 7 years

Minimum Education Requirements: BS

Senior Net Developer

Under general supervision, assists in research and fact-finding to develop or modify information systems. Assists in preparing detailed specifications from which programs will be written. Designs, codes, tests, debugs, documents and maintains those programs.

Project Manager

Leads teams of smaller projects or assists more senior program management on larger programs. Analyzes new and complex project related problems and creates innovative solutions involving finance, scheduling, technology, methodology, tools, and solution components.

Solution Engineer

Experience with Asp.net, C#, Angular JS, Bootstrap, SQL Server 2012.

Experience with Mongo DB, Web APIs and RESTful web/cloud services.

Experience in real world delivery

Experience as Lead in the design of program specifications and the implementation of software solutions.

Functional Responsibility:

Create and Develop Web Application specifications

Development and Delivery of web forms in ASP.NET, including C#, SQL Server, AngularJS and Node.js.

Develop specifications for full-stack apps which include Web server, relational database, and client-side servers

Design pattern specifications using object-oriented analysis/design

Perform Testing/Evaluation

Perform unit testing of programs and systems

Perform Code Review

Monitor and implement information technology quality assurance standards.

Minimum/General Experience: 7 Years

Education: B.S. or M.S. in Computer Science or equivalent degree or experience

Senior System Administrator

Experience in network engineering, business application, and database administration functions to implement desktop and server systems

Experience with AWS stack (Compute, Storage, Database, Network, Management and IAM

Experience implementing industry best-practices regarding privacy, security, and regulatory compliance.

Proficiency in SQL Server, Oracle and Postgres.

Functional Responsibility:

Perform maintenance and troubleshooting

Perform network and security audits.

Perform and test routine system backups and restores

Anticipate, mitigate, identify, troubleshoot, and resolve hardware and software problems on servers, input/output fleet, and workstations and escalate incidents as necessary

Recommend, schedule, and perform software and hardware improvements, upgrades, patches, reconfigurations, and/or purchases.

Perform management and administration of operating systems & end user software

Manage communications (e-mail) and connection solutions, including workstation connectivity, local area networks, company Web site, intranet, and Internet applications.

Manage end user accounts, permissions, access rights, and storage allocations in accordance with best-practices regarding privacy, security, and regulatory compliance

Perform network asset management, including…