MAS - Resilient Solutions 21, Inc. - GS35F087GA

AUTHORIZED

MULTIPLE AWARD SCHEDULE PRICELIST

GENERAL PURPOSE COMMERCIAL INFORMATION TECHNOLOGY

EQUIPMENT, SOFTWARE AND SERVICES

Special Item No. 54151S - Professional IT Services

Note: All non-professional labor categories must be incidental to and used solely to support hardware, software and/or professional services, and cannot be purchased separately.

SPECIAL ITEM NUMBER 54151S - INFORMATION TECHNOLOGY (IT) PROFESSIONAL SERVICES

Other Information Services (All other information services belong under Schedule 76) FPDS Code D399 Other Information Technology Services, Not Elsewhere Classified

Note 1: All non-professional labor categories must be incidental to and used solely to support hardware, software and/or professional services, and cannot be purchased separately.

Note 2: Offerors and Agencies are advised that the Group 70 – Information Technology Schedule is not to be used as a means to procure services which properly fall under the Brooks Act. These services include, but are not limited to, architectural, engineering, mapping, cartographic production, remote sensing, geographic information systems, and related services. FAR 36.6 distinguishes between mapping services of an A/E nature and mapping services which are not connected nor incidental to the traditionally accepted A/E Services.

Note 3: This solicitation is not intended to solicit for the reselling of IT Professional Services, except for the provision of implementation, maintenance, integration, or training services in direct support of a product. Under such circumstances the services must be performance by the publisher or manufacturer or one of their authorized agents.

Resilient Solutions 21 301 Gold Avenue SW, Suite 201 Albuquerque, New Mexico 87102 505-314-2141 www.rs21.io

Contract Number: GS35F087GA

Period Covered by Contract: November 28, 2016 – November 26, 2026

General Services Administration Federal Acquisition Service Products and ordering information in this Authorized Information Technology Schedule Pricelist are also available on the GSA Advantage! System (http://www.gsaadvantage.gov).

Table of Contents

INFORMATION FOR ORDERING ACTIVITIES APPLICABLE TO ALL SPECIAL ITEM

NUMBERS

TERMS AND CONDITIONS APPLICABLE TO INFORMATION TECHNOLOGY (IT)

PROFESSIONAL SERVICES (SPECIAL ITEM NUMBER 54151S)

GSA AWARDED FEDERAL PRICELIST

USA COMMITMENT TO PROMOTE SMALL BUSINESS PARTICIPATION PROCUREMENT

PROGRAMS

BEST VALUE BLANKET PURCHASE AGREEMENT FEDERAL SUPPLY SCHEDULE

INFORMATION FOR ORDERING ACTIVITIES

APPLICABLE TO ALL SPECIAL ITEM NUMBERS

SPECIAL NOTICE TO AGENCIES: Small Business Participation SBA strongly supports the participation of small business concerns in the Federal Acquisition Service. To enhance Small Business Participation SBA policy allows agencies to include in their procurement base and goals, the dollar value of orders expected to be placed against the Federal Supply Schedules, and to report accomplishments against these goals.

For orders exceeding the micropurchase threshold, FAR 8.404 requires agencies to consider the catalogs/pricelists of at least three schedule contractors or consider reasonably available information by using the GSA Advantage! on-line shopping service (www.gsaadvantage.gov). The catalogs/pricelists, GSA Advantage! and the Federal Acquisition Service Home Page (www.gsa.gov/fas) contain information on a broad array of products and services offered by small business concerns.

This information should be used as a tool to assist ordering activities in meeting or exceeding established small business goals. It should also be used as a tool to assist in including small, small disadvantaged, and women-owned small businesses among those considered when selecting pricelists for a best value determination.

For orders exceeding the micropurchase threshold, customers are to give preference to small business concerns when two or more items at the same delivered price will satisfy their requirement.

1. GEOGRAPHIC SCOPE OF CONTRACT:

Domestic delivery is delivery within the 48 contiguous states, Alaska, Hawaii, Puerto Rico, Washington, DC, and U.S. Territories. Domestic delivery also includes a port or consolidation point, within the aforementioned areas, for orders received from overseas activities.

Overseas delivery is delivery to points outside of the 48 contiguous states, Washington, DC, Alaska, Hawaii, Puerto Rico, and U.S. Territories.

Offerors are requested to check one of the following boxes:

For Special Item Number 517312 Wireless Services ONLY, if awarded, list the limited geographic coverage area:

2. CONTRACTOR’S ORDERING ADDRESS AND PAYMENT INFORMATION:

Resilient Solutions 21 301 Gold Avenue SW, Suite 201 Albuquerque, NM 87102 Contractor must accept the credit card for payments equal to or less than the micro-purchase for oral or written orders under this contract. The Contractor and the ordering agency may agree to use the credit card for dollar amounts over the micro-purchase threshold (See GSAR 552.232-79 Payment by Credit Card). In addition, bank account information for wire transfer payments will be shown on the invoice.

The following telephone number(s) can be used by ordering activities to obtain technical and/or ordering assistance:

508-320-9143 (mobile) 505-314-2141 (office) When Authorized Dealers are allowed by the Contractor to bill ordering activities and accept payment, the order and/or payment must be in the name of the Contractor, in care of the Authorized Dealer.

3. LIABILITY FOR INJURY OR DAMAGE

The Contractor shall not be liable for any injury to ordering activity personnel or damage to ordering activity property arising from the use of equipment maintained by the Contractor, unless such injury or damage is due to the fault or negligence of the Contractor.

4. STATISTICAL DATA FOR GOVERNMENT ORDERING OFFICE COMPLETION OF STANDARD FORM 279:

Block 9: G. Order/Modification Under Federal Schedule Contract Block 16: Data Universal Numbering System (DUNS) Number: 07-978-3989 Block 30: Type of Contractor: B – Other Small Business Block 31: Woman-Owned Small Business - No Block 37: Contractor's Taxpayer Identification Number (TIN): 473466415 Block 40: Veteran Owned Small Business (VOSB): none

8. TRADE AGREEMENTS ACT OF 1979, as amended:

All items are U.S. made end products, designated country end products, Caribbean Basin country end products, Canadian end products, or Mexican end products as defined in the Trade Agreements Act of 1979, as amended.

9. STATEMENT CONCERNING AVAILABILITY OF EXPORT PACKING:

10. Small Requirements: The minimum dollar of orders to be issued is $100.

Special Item Number 532420L - Leasing of new electronic equipment Special Item Number 532420R – Daily/Short Term Rental of IT Equipment Special Item Number 33411 - Purchasing of New Electronic Equipment Special Item Number 33411REF - Purchase of Used or Refurbished Equipment Special Item Number 811212 - Maintenance of Equipment, Repair Services and/or Repair/Spare Parts Special Item Number 511210 - Software Licenses Special Item Number 54151 - Software Maintenance Services Special Item Number 54151S - Information Technology Professional Services Special Item Number 54151ECOM - Electronic Commerce Special Item Number 517312 – Wireless Mobility Solutionms Special Item Number 517410 - Commercial Satellite Communications COMSATCOM Transponded Capacity

b. The Maximum Order for the following Special Item Numbers (SINs) is $25,000:

Special Item Number 611420 - Training Courses

c. The Maximum Order for the following Special Item Numbers (SINs) is $1,000,000:

Special Item Number 541519ICAM – Identity, Credential and Access Management (ICAM) Special Item Number 541519PKA – Public Key Infrastructure (PKI) Shared Services Provider (SSP) Program Special Item Number 541519IPV – Homeland Security Presidential Directive 12 Product and Service Components

d. The Maximum Order for the following Special Item Numbers (SINs) is $150,000:

Special Item Number 132-100 - Ancillary Supplies and/or Services

12. ORDERING PROCEDURES FOR FEDERAL SUPPLY SCHEDULE CONTRACTS

Ordering activities shall use the ordering procedures of Federal Acquisition Regulation (FAR) 8.405 when placing an order or establishing a BPA for supplies or services. These procedures apply to all schedules.

13. FEDERAL INFORMATION TECHNOLOGY/TELECOMMUNICATION STANDARDS REQUIREMENTS: ordering activities acquiring products from this Schedule must comply with the provisions of the Federal Standards Program, as appropriate (reference: NIST Federal Standards Index). Inquiries to determine whether or not specific products listed herein comply with Federal Information Processing Standards (FIPS) or Federal Telecommunication Standards (FED-STDS), which are cited by ordering activities, shall be responded to promptly by the Contractor.

13.1 FEDERAL INFORMATION PROCESSING STANDARDS PUBLICATIONS (FIPS PUBS): Information Technology products under this Schedule that do not conform to Federal Information Processing Standards (FIPS) should not be acquired unless a waiver has been granted in accordance with the applicable "FIPS Publication." Federal Information Processing Standards Publications (FIPS PUBS) are issued by the U.S. Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security Act. Information concerning their availability and applicability should be obtained from the National Technical Information Service (NTIS), 5285 Port Royal Road, Springfield, Virginia 22161. FIPS PUBS include voluntary standards when these are adopted for Federal use. Individual orders for FIPS PUBS should be referred to the NTIS Sales Office, and orders for subscription service should be referred to the NTIS Subscription Officer, both at the above address, or telephone number (703) 487-4650.

13.2 FEDERAL TELECOMMUNICATION STANDARDS (FED-STDS): Telecommunication products under this Schedule that do not conform to Federal Telecommunication Standards (FED-STDS) should not be acquired unless a waiver has been granted in accordance with the applicable "FED-STD." Federal Telecommunication Standards are issued by the U.S. Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security Act. Ordering information and information concerning the availability of FED-STDS should be obtained from the GSA, Federal Acquisition Service, Specification Section, 470 East L’Enfant Plaza, Suite 8100, SW, Washington, DC 20407, telephone number (202)619-8925. Please include a self-addressed mailing label when requesting information by mail. Information concerning their applicability can be obtained by writing or calling the U.S. Department of Commerce, National Institute of Standards and Technology, Gaithersburg, MD 20899, telephone number (301)975-2833.

16. GSA ADVANTAGE!

GSA Advantage! is an on-line, interactive electronic information and ordering system that provides on-line access to vendors' schedule prices with ordering information. GSA Advantage! will allow the user to perform various searches across all contracts including, but not limited to:

Agencies can browse GSA Advantage! by accessing the Internet World Wide Web utilizing a browser (ex.: NetScape). The Internet address is http://www.gsaadvantage.gov

17. PURCHASE OF OPEN MARKET ITEMS

NOTE: Open Market Items are also known as incidental items, noncontract items, non-Schedule items, and items not on a Federal Supply Schedule contract. Ordering Activities procuring open market items must follow FAR 8.402(f).

For administrative convenience, an ordering activity contracting officer may add items not on the Federal Supply Multiple Award Schedule (MAS) -- referred to as open market items -- to a Federal Supply Schedule blanket purchase agreement (BPA) or an individual task or delivery order, only if-

The terms and conditions of this contract shall apply to all orders for installation, maintenance and repair of equipment in areas listed in the pricelist outside the 48 contiguous states and the District of Columbia, except as indicated below:

Upon request of the Contractor, the ordering activity may provide the Contractor with logistics support, as available, in accordance with all applicable ordering activity regulations. Such ordering activity support will be provided on a reimbursable basis, and will only be provided to the Contractor's technical personnel whose services are exclusively required for the fulfillment of the terms and conditions of this contract.

20. BLANKET PURCHASE AGREEMENTS (BPAs) The use of BPAs under any schedule contract to fill repetitive needs for supplies or services is allowable. BPAs may be established with one or more schedule contractors. The number of BPAs to be established is within the discretion of the ordering activity establishing the BPA and should be based on a strategy that is expected to maximize the effectiveness of the BPA(s). Ordering activities shall follow FAR 8.405-3 when creating and implementing BPA(s).

21. CONTRACTOR TEAM ARRANGEMENTS

Contractors participating in contractor team arrangements must abide by all terms and conditions of their respective contracts. This includes compliance with Clauses 552.238-74, Industrial Funding Fee and Sales Reporting, i.e., each contractor (team member) must report sales and remit the IFF for all products and services provided under its individual contract.

22. INSTALLATION, DEINSTALLATION, REINSTALLATION

The Davis-Bacon Act (40 U.S.C. 276a-276a-7) provides that contracts in excess of $2,000 to which the United States or the District of Columbia is a party for construction, alteration, or repair (including painting and decorating) of public buildings or public works with the United States, shall contain a clause that no laborer or mechanic employed directly upon the site of the work shall received less than the prevailing wage rates as determined by the Secretary of Labor. The requirements of the Davis-Bacon Act do not apply if the construction work is incidental to the furnishing of supplies, equipment, or services. For example, the requirements do not apply to simple installation or alteration of a public building or public work that is incidental to furnishing supplies or equipment under a supply contract. However, if the construction, alteration or repair is segregable and exceeds $2,000, then the requirements of the Davis-Bacon Act applies.

The ordering activity issuing the task order against this contract will be responsible for proper administration and enforcement of the Federal labor standards covered by the Davis-Bacon Act. The proper Davis-Bacon wage determination will be issued by the ordering activity at the time a request for quotations is made for applicable construction classified installation, deinstallation, and reinstallation services under SIN 33411-8 or 33411REF-9.

23. SECTION 508 COMPLIANCE.

I certify that in accordance with 508 of the Rehabilitation Act of 1973, as amended (29 U.S.C. 794d), FAR 39.2, and the Architectural and Transportation Barriers Compliance Board Electronic and Information Technology (EIT) Accessibility Standards (36 CFR 1194) General Services Administration (GSA), that all IT hardware/software/services are 508 compliant: Yes The offeror is required to submit with its offer a designated area on its website that outlines the Voluntary Product Accessibility Template (VPAT) or equivalent qualification, which ultimately becomes the Government Product Accessibility Template (GPAT). Section 508 compliance information on the supplies and services in this contract are available at the following website address (URL): www.rs21.io The EIT standard can be found at: www.Section508.gov/.

24. PRIME CONTRACTOR ORDERING FROM FEDERAL SUPPLY SCHEDULES.

Prime Contractors (on cost reimbursement contracts) placing orders under Federal Supply Schedules, on behalf of an ordering activity, shall follow the terms of the applicable schedule and authorization and include with each order –

This order is placed under written authorization from _______ dated _______. In the event of any inconsistency between the terms and conditions of this order and those of your Federal Supply Schedule contract, the latter will govern.

26. SOFTWARE INTEROPERABILITY.

Offerors are encouraged to identify within their software items any component interfaces that support open standard interoperability. An item’s interface may be identified as interoperable on the basis of participation in a Government agency-sponsored program or in an independent organization program. Interfaces may be identified by reference to an interface registered in the component registry located at http://www.core.gov.

27. ADVANCE PAYMENTS

A payment under this contract to provide a service or deliver an article for the United States Government may not be more than the value of the service already provided or the article already delivered. Advance or pre-payment is not authorized or allowed under this contract. (31 U.S.C. 3324)

TERMS AND CONDITIONS APPLICABLE TO INFORMATION TECHNOLOGY (IT)

PROFESSIONAL SERVICES (SPECIAL ITEM NUMBER 54151S)

****NOTE: All non-professional labor categories must be incidental to, and used solely to support professional services, and cannot be purchased separately.

6. INSPECTION OF SERVICES

In accordance with FAR 52.212-4 CONTRACT TERMS AND CONDITIONS--COMMERCIAL ITEMS (MAR 2009) (DEVIATION I - FEB 2007) for Firm-Fixed Price orders and FAR 52.212-4 CONTRACT TERMS AND CONDITIONS COMMERCIAL ITEMS (MAR 2009) (ALTERNATE I OCT 2008) (DEVIATION I – FEB 2007) applies to Time-and-Materials and Labor-Hour Contracts orders placed under this contract.

7. RESPONSIBILITIES OF THE CONTRACTOR

The Contractor shall comply with all laws, ordinances, and regulations (Federal, State, City, or otherwise) covering work of this character. If the end product of a task order is software, then FAR 52.227-14 (Dec 2007) Rights in Data – General, may apply.

8. RESPONSIBILITIES OF THE ORDERING ACTIVITY

Subject to security regulations, the ordering activity shall permit Contractor access to all facilities necessary to perform the requisite IT/IAM Professional Services.

9. INDEPENDENT CONTRACTOR

All IT/IAM Professional Services performed by the Contractor under the terms of this contract shall be as an independent Contractor, and not as an agent or employee of the ordering activity.

“Contractor” means the person, firm, unincorporated association, joint venture, partnership, or corporation that is a party to this contract.

“Contractor and its affiliates” and “Contractor or its affiliates” refers to the Contractor, its chief executives, directors, officers, subsidiaries, affiliates, subcontractors at any tier, and consultants and any joint venture involving the Contractor, any entity into or with which the Contractor subsequently merges or affiliates, or any other successor or assignee of the Contractor.

An “Organizational conflict of interest” exists when the nature of the work to be performed under a proposed ordering activity contract, without some restriction on ordering activities by the Contractor and its affiliates, may either (i) result in an unfair competitive advantage to the Contractor or its affiliates or (ii) impair the Contractor’s or its affiliates’ objectivity in performing contract work.

b. To avoid an organizational or financial conflict of interest and to avoid prejudicing the best interests of the ordering activity, ordering activities may place restrictions on the Contractors, its affiliates, chief executives, directors, subsidiaries and subcontractors at any tier when placing orders against schedule contracts. Such restrictions shall be consistent with FAR 9.505 and shall be designed to avoid, neutralize, or mitigate organizational conflicts of interest that might otherwise exist in situations related to individual orders placed against the schedule contract. Examples of situations, which may require restrictions, are provided at FAR 9.508.

11. INVOICES

The Contractor, upon completion of the work ordered, shall submit invoices for IT/IAM Professional services. Progress payments may be authorized by the ordering activity on individual orders if appropriate. Progress payments shall be based upon completion of defined milestones or interim products. Invoices shall be submitted monthly for recurring services performed during the preceding month.

12. PAYMENTS

For firm-fixed price orders the ordering activity shall pay the Contractor, upon submission of proper invoices or vouchers, the prices stipulated in this contract for service rendered and accepted. Progress payments shall be made only when authorized by the order. For time‑and‑materials orders, the Payments under Time‑and‑Materials and Labor‑Hour Contracts at FAR 52.212-4 (MAR 2009) (ALTERNATE I – OCT 2008) (DEVIATION I – FEB 2007) applies to time‑and‑materials orders placed under this contract. For labor‑hour orders, the Payment under Time‑and‑Materials and Labor‑Hour Contracts at FAR 52.212-4 (MAR 2009) (ALTERNATE I – OCT 2008) (DEVIATION I – FEB 2007) applies to labor‑hour orders placed under this contract. 52.216-31(Feb 2007) Time-and-Materials/Labor-Hour Proposal Requirements—Commercial Item Acquisition. As prescribed in 16.601(e)(3), insert the following provision:

(a) The Government contemplates award of a Time-and-Materials or Labor-Hour type of contract resulting from this solicitation.

(b) The offeror must specify fixed hourly rates in its offer that include wages, overhead, general and administrative expenses, and profit. The offeror must specify whether the fixed hourly rate for each labor category applies to labor performed by—

(1) The offeror;

(2) Subcontractors; and/or

(3) Divisions, subsidiaries, or affiliates of the offeror under a common control.

13. RESUMES

Resumes shall be provided to the GSA Contracting Officer or the user ordering activity upon request.

14. INCIDENTAL SUPPORT COSTS

Incidental support costs are available outside the scope of this contract. The costs will be negotiated separately with the ordering activity in accordance with the guidelines set forth in the FAR.

15. APPROVAL OF SUBCONTRACTS

The ordering activity may require that the Contractor receive, from the ordering activity's Contracting Officer, written consent before placing any subcontract for furnishing any of the work called for in a task order.

16. DESCRIPTION OF IT/IAM PROFESSIONAL SERVICES AND PRICING

Resilient Solutions 21 – 54151S Resilient Solutions 21 provides comprehensive program management, big data, modeling, geospatial, visualization, research and development, training, database planning and design, systems analysis and design, network services and programming for government agencies and private sector corporations in markets ranging from national security to urban planning. We work closely with our customers to identify challenges and unlock imaginative solutions that not only help them survive, but also thrive.

Senior Principal

Minimum/General Experience: Fifteen (15) years of experience.

Functional Responsibility: Provides senior leadership of large, complex programs or projects and works with senior management of the client organization to ensure the overall direction and expectations are being met. Functional Responsibility: Guides users in formulating requirements, advises alternative approaches, conducts feasibility studies.

Minimum Education: Masters in Business, Public Administration, or project-related field of study. Two (2) additional years of experience in Business, Public Administration, or project-related field of study may be substituted in lieu of a Masters degree and (4) additional years of experience in Business, Public Administration, or project-related field of study may be substituted in lieu of a Bachelors degree.

Principal

Minimum/General Experience: Ten (10) years of experience.

Functional Responsibility: Demonstrated experience managing project or program tasks.

Minimum Education: Bachelors in Business, Computer Science, or project-related field of study. Four (4) additional years of experience in Business, Public Administration, or project-related field of study may be substituted in lieu of a Bachelors degree.

Consultant

Minimum/General Experience: Ten (10) years of experience.

Functional Responsibility: Leads consulting tasks, oversees data gathering and analysis, establishes task priorities, leads the development of written reports, and oversees other more junior colleagues; provides senior subject matter expertise

Minimum Education: Bachelors in Business, Computer Science, or project-related field of study. Four (4) additional years of experience in Business, Public Administration, or project-related field of study may be substituted in lieu of a Bachelors degree.

Senior Planner

Minimum/General Experience: Eight (8) years of experience.

Functional Responsibility: Schedules and allocates work. Responsible for program planning execution and performance.

Minimum Education: Bachelors in Business, Computer Science, or project-related field of study. Four (4) additional years of experience in Business, Public Administration, or project-related field of study may be substituted in lieu of a Bachelors degree.

Junior Planner

Minimum/General Experience: Six (6) years of experience.

Functional Responsibility: Conducts planning activities and has 6 years experience in area of expertise.

Minimum Education: Bachelors in Business, Computer Science, or project-related field of study. Four (4) additional years of experience in Business, Public Administration, or project-related field of study may be substituted in lieu of a Bachelors degree.

Geospatial Analyst

Minimum/General Experience: Five (5) years of experience.

Functional Responsibility: Creates, organizes and visualizes spatial imagery.

Minimum Education: Bachelors in Business, Computer Science, or project-related field of study. Four (4) additional years of experience in Business, Public Administration, or project-related field of study may be substituted in lieu of a Bachelors degree.

Data Architect

Minimum/General Experience: Three (3) years of experience.

Functional Responsibility: Develops strategies for data acquisitions, archive recovery, and implementation of a database.

Minimum Education: Bachelors in Business, Computer Science, or project-related field of study. Four (4) additional years of experience in Business, Public Administration, or project-related field of study may be substituted in lieu of a Bachelors degree.

Informatics Lead

Minimum/General Experience: Three (3) years of experience.

Functional Responsibility: Responsible for formatting, processing, and communication of information.

Minimum Education: Bachelors in Business, Computer Science, or project-related field of study. Four (4) additional years of experience in Business, Public Administration, or project-related field of study may be substituted in lieu of a Bachelors degree.

Web Expert

Minimum/General Experience: Three (3) years of experience.

Functional Responsibility: Creates interactive, online environments.

Minimum Education: Bachelors in Business, Computer Science, or project-related field of study. Four (4) additional years of experience in Business, Public Administration, or project-related field of study may be substituted in lieu of a Bachelors degree.

Management Analyst

Minimum/General Experience: Two (2) years of experience.

Functional Responsibility: Conducts research and performs analytic tasks directly related to area of expertise.

Minimum Education: Bachelors in Business, Computer Science, or project-related field of study. Four (4) additional years of experience in Business, Public Administration, or project-related field of study may be substituted in lieu of a Bachelors degree.

Associate Planner

Minimum/General Experience: Zero (0) years of experience.

Functional Responsibility: Conducts planning activities.

Minimum Education: Bachelors in Business, Computer Science, or project-related field of study. Four (4) additional years of experience in Business, Public Administration, or project-related field of study may be substituted in lieu of a Bachelors degree.

Business Executive I

Minimum/General Experience: Seven (7) years of experience.

Functional Responsibility: Provides execuitve leadership on business management and oversight.

Minimum Education: Bachelors in Business, Computer Science, or project-related field of study. Four (4) additional years of experience in Business, Public Administration, or project-related field of study may be substituted in lieu of a Bachelors degree.

Business Executive II

Minimum/General Experience: Ten (10) years of experience.

Functional Responsibility: Provides execuitve leadership on business management and oversight.

Minimum Education: Bachelors in Business, Computer Science, or project-related field of study. Four (4) additional years of experience in Business, Public Administration, or project-related field of study may be substituted in lieu of a Bachelors degree.

Business Management Lead

Minimum/General Experience: Five (5) years of experience.

Functional Responsibility: Provides and oversees business management support and oversight.

Minimum Education: Bachelors in Business, Computer Science, or project-related field of study. Four (4) additional years of experience in Business, Public Administration, or project-related field of study may be substituted in lieu of a Bachelors degree.

Business Professional

Minimum/General Experience: Three (3) years of experience.

Functional Responsibility: Provides business management support and oversight.

Minimum Education: Bachelors in Business, Computer Science, or project-related field of study. Four (4) additional years of experience in Business, Public Administration, or project-related field of study may be substituted in lieu of a Bachelors degree.

Senior Data Scientist

Minimum/General Experience: Five (5) years of experience.

Functional Responsibility: Serves as a subject matter expert and consults on data science projects, elements, and methodologies.

Minimum Education: Masters in Data Science, Data Analytics, Computer Science, or project-related field of study. Two (2) additional years of experience in Data Science, Data Analytics, Computer Science, or project-related field of study may be substituted in lieu of a Masters degree and (4) additional years of experience in Data Science, Data Analytics, Computer Science, or project-related field of study may be substituted in lieu of a Bachelors degree.

Data Science Lead

Minimum/General Experience: Three (3) years of experience.

Functional Responsibility: Oversees and consults on data science projects, elements, and methodologies.

Minimum Education: Masters in Business, Computer Science, or project-related field of study. Two (2) additional years of experience in Business, Public Administration, or project-related field of study may be substituted in lieu of a Masters degree and (4) additional years of experience in Business, Public Administration, or project-related field of study may be substituted in lieu of a Bachelors degree.

Data Scientist I

Minimum/General Experience: One (1) year of experience.

Functional Responsibility: Performs and consults on data science projects, elements, and methodologies.

Minimum Education: Bachelors in Business, Computer Science, or project-related field of study. Four (4) additional years of experience in Business, Public Administration, or project-related field of study may be substituted in lieu of a Bachelors degree.

Data Scientist II

Minimum/General Experience: One (1) year of experience.

Functional Responsibility: Performs and consults on data science projects, elements, and methodologies.

Minimum Education: Masters in Business, Computer Science, or project-related field of study. Two (2) additional years of experience in Business, Public Administration, or project-related field of study may be substituted in lieu of a Masters degree and (4) additional years of experience in Business, Public Administration, or project-related field of study may be substituted in lieu of a Bachelors degree.

Data Engineer I

Minimum/General Experience: One (1) year of experience.

Functional Responsibility: Performs technical responsibilities on a project.

Minimum Education: Bachelors in Data Science, Data Analytics, Computer Science, or project-related field of study. Four (4) years of experience in Data Science, Data Analytics, Computer Science, or project-related field of study may be substituted in lieu of a Bachelors degree.

Data Engineer II

Minimum/General Experience: Three (3) years of experience.

Functional Responsibility: Performs technical responsibilities on a project.

Minimum Education: Bachelors in Data Science, Data Analytics, Computer Science, or project-related field of study. Four (4) years of experience in Data Science, Data Analytics, Computer Science, or project-related field of study may be substituted in lieu of a Bachelors degree.

Data Engineer III

Minimum/General Experience: Five (5) years of experience.

Functional Responsibility: Performs and oversees technical responsibilities on a project.

Minimum Education: Bachelors in Data Science, Data Analytics, Computer Science, or project-related field of study. Four (4) years of experience in Data Science, Data Analytics, Computer Science, or project-related field of study may be substituted in lieu of a Bachelors degree.

Data Engineer IV

Minimum/General Experience: Eight (8) years of experience.

Functional Responsibility: Performs and oversees technical responsibilities on a project.

Minimum Education: Bachelors in Data Science, Data Analytics, Computer Science, or…