Federal Supply Schedule GS35F0599U
DOC document 63 KB
- Attached to
- Federal Supply Schedule GS35F0599U Federal contract IDV
- Contract number
- GS35F0599U
- Issued by
- GSA Federal Acquisition Service
View the file
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
AUTHORIZED
INFORMATION TECHNOLOGY SCHEDULE PRICELIST
GENERAL PURPOSE COMMERCIAL INFORMATION TECHNOLOGY
EQUIPMENT, SOFTWARE AND SERVICES
Special Item No. 132-51 Information Technology Professional Services
SIN 132-51 - INFORMATION TECHNOLOGY (IT) PROFESSIONAL SERVICES
| FPDS Code D302 | IT Systems Development Services |
| FPDS Code D306 | IT Systems Analysis Services |
| FPDS Code D307 | Automated Information Systems Design and Integration Services |
| FPDS Code D308 | Programming Services |
| FPDS Code D310 | IT Backup and Security Services |
| FPDS Code D311 | IT Data Conversion Services |
| FPDS Code D316 | IT Network Management Services |
| FPDS Code D399 | Other Information Technology Services, Not Elsewhere Classified |
Note 1: All non-professional labor categories must be incidental to and used solely to support hardware, software and/or professional services, and cannot be purchased separately.
BERICO Technologies, LLC `11130 Sunrise Valley Dr., Suite 300 Reston, VA 20191 www.bericotechnologies.com
| Contract Number: | GS-35F-0599U |
| Period Covered by Contract: | 9/18/2008 – 9/17/2018 |
General Services Administration Federal Acquisition Service Pricelist current through Modification #PA-0019, datedAugust 12, 2013.
Products and ordering information in this Authorized FSS Information Technology Schedule Pricelist are also available on the GSA Advantage! System. Agencies can browse GSA Advantage! by accessing the Federal Acquisition Service’s Home Page via the Internet at http://www.fss.gsa.gov/
TABLE OF CONTENTS
Geographic Scope 3
Statistical Data 4
Terms and Conditions for SIN 132-51 10
Labor Pricing 14
Labor Category Definition 15
INFORMATION FOR ORDERING ACTIVITIES
APPLICABLE TO ALL SPECIAL ITEM NUMBERS
SPECIAL NOTICE TO AGENCIES: Small Business Participation SBA strongly supports the participation of small business concerns in the Federal Acquisition Service. To enhance Small Business Participation SBA policy allows agencies to include in their procurement base and goals, the dollar value of orders expected to be placed against the Federal Supply Schedules, and to report accomplishments against these goals.
For orders exceeding the micropurchase threshold, FAR 8.404 requires agencies to consider the catalogs/pricelists of at least three schedule contractors or consider reasonably available information by using the GSA Advantage! on-line shopping service (www.fss.gsa.gov). The catalogs/pricelists, GSA Advantage! and the Federal Acquisition Service Home Page (www.fss.gsa.gov) contain information on a broad array of products and services offered by small business concerns.
This information should be used as a tool to assist ordering activities in meeting or exceeding established small business goals. It should also be used as a tool to assist in including small, small disadvantaged, and women-owned small businesses among those considered when selecting pricelists for a best value determination.
For orders exceeding the micropurchase threshold, customers are to give preference to small business concerns when two or more items at the same delivered price will satisfy their requirement.
1. GEOGRAPHIC SCOPE OF CONTRACT:
Domestic delivery is delivery within the 48 contiguous states, Alaska, Hawaii, Puerto Rico, Washington, DC, and U.S. Territories. Domestic delivery also includes a port or consolidation point, within the aforementioned areas, for orders received from overseas activities.
Overseas delivery is delivery to points outside of the 48 contiguous states, Washington, DC, Alaska, Hawaii, Puerto Rico, and U.S. Territories.
Offerors are requested to check one of the following boxes:
| [ x ] | The Geographic Scope of Contract will be domestic and overseas delivery. |
| [ ] | The Geographic Scope of Contract will be overseas delivery only. |
| [ ] | The Geographic Scope of Contract will be domestic delivery only. |
For Special Item Number 132-53 Wireless Services ONLY, if awarded, list the limited geographic coverage area:
2. CONTRACTOR’S ORDERING ADDRESS AND PAYMENT INFORMATION:
11130 Sunrise Valley Dr. Suite 300, Reston, VA 21091 Contractors are required to accept credit cards for payments equal to or less than the micropurchase threshold for oral or written delivery orders. Credit cards will not be acceptable for payment above the micro-purchase threshold. In addition, bank account information for wire transfer payments will be shown on the invoice.
The following telephone number(s) can be used by ordering activities to obtain technical and/or ordering assistance:
703-390-9926 x 2004 703-390-9926 x 2009
3. LIABILITY FOR INJURY OR DAMAGE
The Contractor shall not be liable for any injury to ordering activity personnel or damage to ordering activity property arising from the use of equipment maintained by the Contractor, unless such injury or damage is due to the fault or negligence of the Contractor.
4. STATICAL DATA FOR GOVERNMENT ORDERING OFFICE COMPLETION OF STANDARD FORM 279:
Block 9: G. Order/Modification Under Federal Schedule Block 16: Data Universal Numbering System (DUNS) Number: 782014042 Block 30: Type of Contractor - B. Other Small Business
Block 31: Woman-Owned Small Business - No.
Block 36: Contractor's Taxpayer Identification Number (TIN): 20-4066311
| 4a. | CAGE Code: 4G7W6 |
| 4b. | Contractor has registered with the Central Contractor Registration Database. |
| 5. | FOB DESTINATION |
| 6. | DELIVERY SCHEDULE |
| a. | TIME OF DELIVERY: The Contractor shall deliver to destination within the number of calendar days after receipt of order (ARO), as set forth below: |
| SPECIAL ITEM NUMBER | DELIVERY TIME (Days ARO) |
__132-51______As negotiated between Berico Technologies and the _ ______________ ordering activities.
b. URGENT REQUIREMENTS: When the Federal Supply Schedule contract delivery period does not meet the bona fide urgent delivery requirements of an ordering activity, ordering activities are encouraged, if time permits, to contact the Contractor for the purpose of obtaining accelerated delivery. The Contractor shall reply to the inquiry within 3 workdays after receipt. (Telephonic replies shall be confirmed by the Contractor in writing.) If the Contractor offers an accelerated delivery time acceptable to the ordering activity, any order(s) placed pursuant to the agreed upon accelerated delivery time frame shall be delivered within this shorter delivery time and in accordance with all other terms and conditions of the contract.
| 7. | DISCOUNTS: Prices shown are NET Prices; Basic Discounts have been deducted. | |
| a. | Prompt Payment: __0_% - _30__ days from receipt of invoice or date of acceptance, whichever is later. | |
| b. | Quantity: | None |
| c. | Dollar Volume: None | |
| d. | Government Educational Institutions: State that Government Educational Institutions are offered the same discounts as all other Government customers. |
8. TRADE AGREEMENTS ACT OF 1979, as amended:
All items are U.S. made end products, designated country end products, Caribbean Basin country end products, Canadian end products, or Mexican end products as defined in the Trade Agreements Act of 1979, as amended.
9. STATEMENT CONCERNING AVAILABILITY OF EXPORT PACKING:
10. Small Requirements: The minimum dollar value of orders to be issued is $100.
| 11. | MAXIMUM ORDER (All dollar amounts are exclusive of any discount for prompt payment.) |
| a. | The Maximum Order value for the following Special Item Numbers (SINs) is $500,000: |
Special Item Number 132-51 - Information Technology (IT) Professional Services
12. ORDERING PROCEEDURES FOR FEDERAL SUPPLY SCHEDULE CONTRACTS
Ordering activities shall use the ordering procedures of Federal Acquisition Regulation (FAR) 8.405 when placing an order or establishing a BPA for supplies or services. These procedures apply to all schedules.
| a. | FAR 8.405-1 Ordering procedures for supplies, and services not requiring a statement of work. |
| b. | FAR 8.405-2 Ordering procedures for services requiring a statement of work. |
13. FEDERAL INFORMATION TECHNOLOGY/TELECOMMUNICATION STANDARDS REQUIREMENTS: ordering activities acquiring products from this Schedule must comply with the provisions of the Federal Standards Program, as appropriate (reference: NIST Federal Standards Index). Inquiries to determine whether or not specific products listed herein comply with Federal Information Processing Standards (FIPS) or Federal Telecommunication Standards (FED-STDS), which are cited by ordering activities, shall be responded to promptly by the Contractor.
13.1 FEDERAL INFORMATION PROCESSING STANDARDS PUBLICATIONS (FIPS PUBS): Information Technology products under this Schedule that do not conform to Federal Information Processing Standards (FIPS) should not be acquired unless a waiver has been granted in accordance with the applicable "FIPS Publication." Federal Information Processing Standards Publications (FIPS PUBS) are issued by the U.S. Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security Act. Information concerning their availability and applicability should be obtained from the National Technical Information Service (NTIS), 5285 Port Royal Road, Springfield, Virginia 22161. FIPS PUBS include voluntary standards when these are adopted for Federal use. Individual orders for FIPS PUBS should be referred to the NTIS Sales Office, and orders for subscription service should be referred to the NTIS Subscription Officer, both at the above address, or telephone number (703) 487-4650.
13.2 FEDERAL TELECOMMUNICATION STANDARDS (FED-STDS): Telecommunication products under this Schedule that do not conform to Federal Telecommunication Standards (FED-STDS) should not be acquired unless a waiver has been granted in accordance with the applicable "FED-STD." Federal Telecommunication Standards are issued by the U.S. Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security Act. Ordering information and information concerning the availability of FED-STDS should be obtained from the GSA, Federal Acquisition Service, Specification Section, 470 East L’Enfant Plaza, Suite 8100, SW, Washington, DC 20407, telephone number (202)619-8925. Please include a self-addressed mailing label when requesting information by mail. Information concerning their applicability can be obtained by writing or calling the U.S. Department of Commerce, National Institute of Standards and Technology, Gaithersburg, MD 20899, telephone number (301)975-2833.
| 14. | CONTRACTOR TASKS / SPECIAL REQUIREMENTS (C-FSS-370) (NOV 2003) FSS A/L FC 01-5 |
| (a) | Security Clearances: The Contractor may be required to obtain/possess varying levels of security clearances in the performance of orders issued under this contract. All costs associated with obtaining/possessing such security clearances should be factored into the price offered under the Multiple Award Schedule. |
| (b) | Travel: The Contractor may be required to travel in performance of orders issued under this contract. Allowable travel and per diem charges are governed by Pub .L. 99-234 and FAR Part 31, and are reimbursable by the ordering agency or can be priced as a fixed price item on orders placed under the Multiple Award Schedule. Travel in performance of a task order will only be reimbursable to the extent authorized by the ordering agency. The Industrial Funding Fee does NOT apply to travel and per diem charges. |
| (c) | Certifications, Licenses and Accreditations: As a commercial practice, the Contractor may be required to obtain/possess any variety of certifications, licenses and accreditations for specific FSC/service code classifications offered. All costs associated with obtaining/ possessing such certifications, licenses and accreditations should be factored into the price offered under the Multiple Award Schedule program. |
| (d) | Insurance: As a commercial practice, the Contractor may be required to obtain/possess insurance coverage for specific FSC/service code classifications offered. All costs associated with obtaining/possessing such insurance should be factored into the price offered under the Multiple Award Schedule program. |
| (e) | Personnel: The Contractor may be required to provide key personnel, resumes or skill category descriptions in the performance of orders issued under this contract. Ordering activities may require agency approval of additions or replacements to key personnel. |
| (f) | Organizational Conflicts of Interest: Where there may be an organizational conflict of interest as determined by the ordering agency, the Contractor’s participation in such order may be restricted in accordance with FAR Part 9.5. |
| (g) | Documentation/Standards: The Contractor may be requested to provide products or services in accordance with rules, regulations, OMB orders, standards and documentation as specified by the agency’s order. |
| (h) | Data/Deliverable Requirements: Any required data/deliverables at the ordering level will be as specified or negotiated in the agency’s order. |
| (i) | Government-Furnished Property: As specified by the agency’s order, the Government may provide property, equipment, materials or resources as necessary. |
| (j) | Availability of Funds: Many Government agencies’ operating funds are appropriated for a specific fiscal year. Funds may not be presently available for any orders placed under the contract or any option year. The Government’s obligation on orders placed under this contract is contingent upon the availability of appropriated funds from which payment for ordering purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are available to the ordering Contracting Officer. |
| (k) | Overtime: For professional services, the labor rates in the Schedule should not vary by virtue of the Contractor having worked overtime. For services applicable to the Service Contract Act (as identified in the Schedule), the labor rates in the Schedule will vary as governed by labor laws (usually assessed a time and a half of the labor rate). |
15. CONTRACT ADMINISTRATION FOR ORDERING ACTIVITIES: Any ordering activity, with respect to any one or more delivery orders placed by it under this contract, may exercise the same rights of termination as might the GSA Contracting Officer under provisions of FAR 52.212-4, paragraphs (l) Termination for the ordering activity’s convenience, and (m) Termination for Cause (See 52.212-4)
16. GSA ADVANTAGE!
GSA Advantage! is an on-line, interactive electronic information and ordering system that provides on-line access to vendors' schedule prices with ordering information. GSA Advantage! will allow the user to perform various searches across all contracts including, but not limited to:
| (1) | Manufacturer; |
| (2) | Manufacturer's Part Number; and |
| (3) | Product categories. |
Agencies can browse GSA Advantage! by accessing the Internet World Wide Web utilizing a browser (ex.: NetScape). The Internet address is http://www.fss.gsa.gov/.
17. PURCHASE OF OPEN MARKET ITEMS
NOTE: Open Market Items are also known as incidental items, noncontract items, non-Schedule items, and items not on a Federal Supply Schedule contract. ODCs (Other Direct Costs) are not part of this contract and should be treated as open market purchases. Ordering Activities procuring open market items must follow FAR 8.402(f).
For administrative convenience, an ordering activity contracting officer may add items not on the Federal Supply Multiple Award Schedule (MAS) -- referred to as open market items -- to a Federal Supply Schedule blanket purchase agreement (BPA) or an individual task or delivery order, only if-
| (1) | All applicable acquisition regulations pertaining to the purchase of the items not on the Federal Supply Schedule have been followed (e.g., publicizing (Part 5), competition requirements (Part 6), acquisition of commercial items (Part 12), contracting methods (Parts 13, 14, and 15), and small business programs (Part 19)); |
| (2) | The ordering activity contracting officer has determined the price for the items not on the Federal Supply Schedule is fair and reasonable; |
| (3) | The items are clearly labeled on the order as items not on the Federal Supply Schedule; and |
| (4) | All clauses applicable to items not on the Federal Supply Schedule are included in the order. |
| 18. | CONTRACTOR COMMITMENTS, WARRANTIES AND REPRESENTATIONS |
| a. | For the purpose of this contract, commitments, warranties and representations include, in addition to those agreed to for the entire schedule contract: |
| (1) | Time of delivery/installation quotations for individual orders; |
| (2) | Technical representations and/or warranties of products concerning performance, total system performance and/or configuration, physical, design and/or functional characteristics and capabilities of a product/equipment/ service/software package submitted in response to requirements which result in orders under this schedule contract. |
| (3) | Any representations and/or warranties concerning the products made in any literature, description, drawings and/or specifications furnished by the Contractor. |
| b. | The above is not intended to encompass items not currently covered by the GSA Schedule contract. |
| 19. | OVERSEAS ACTIVITIES |
The terms and conditions of this contract shall apply to all orders for installation, maintenance and repair of equipment in areas listed in the pricelist outside the 48 contiguous states and the District of Columbia, except as indicated below:
Upon request of the Contractor, the ordering activity may provide the Contractor with logistics support, as available, in accordance with all applicable ordering activity regulations. Such ordering activity support will be provided on a reimbursable basis, and will only be provided to the Contractor's technical personnel whose services are exclusively required for the fulfillment of the terms and conditions of this contract.
20. BLANKET PURCHASE AGREEMENTS (BPAs) The use of BPAs under any schedule contract to fill repetitive needs for supplies or services is allowable. BPAs may be established with one or more schedule contractors. The number of BPAs to be established is within the discretion of the ordering activity establishing the BPA and should be based on a strategy that is expected to maximize the effectiveness of the BPA(s). Ordering activities shall follow FAR 8.405-3 when creating and implementing BPA(s).
21. CONTRACTOR TEAM ARRANGEMENTS
Contractors participating in contractor team arrangements must abide by all terms and conditions of their respective contracts. This includes compliance with Clauses 552.238-74, Industrial Funding Fee and Sales Reporting, i.e., each contractor (team member) must report sales and remit the IFF for all products and services provided under its individual contract.
22. INSTALLATION, DEINSTALLATION, REINSTALLATION
The Davis-Bacon Act (40 U.S.C. 276a-276a-7) provides that contracts in excess of $2,000 to which the United States or the District of Columbia is a party for construction, alteration, or repair (including painting and decorating) of public buildings or public works with the United States, shall contain a clause that no laborer or mechanic employed directly upon the site of the work shall received less than the prevailing wage rates as determined by the Secretary of Labor. The requirements of the Davis-Bacon Act do not apply if the construction work is incidental to the furnishing of supplies, equipment, or services. For example, the requirements do not apply to simple installation or alteration of a public building or public work that is incidental to furnishing supplies or equipment under a supply contract. However, if the construction, alteration or repair is segregable and exceeds $2,000, then the requirements of the Davis-Bacon Act applies.
The ordering activity issuing the task order against this contract will be responsible for proper administration and enforcement of the Federal labor standards covered by the Davis-Bacon Act. The proper Davis-Bacon wage determination will be issued by the ordering activity at the time a request for quotations is made for applicable construction classified installation, deinstallation, and reinstallation services under SIN 132-8.
23. SECTION 508 COMPLIANCE.
If applicable, Section 508 compliance information on the supplies and services in this contract are available in Electronic and Information Technology (EIT) at the following:
The EIT standard can be found at: www.Section508.gov/.
24. PRIME CONTRACTOR ORDERING FROM FEDERAL SUPPLY SCHEDULES.
Prime Contractors (on cost reimbursement contracts) placing orders under Federal Supply Schedules, on behalf of an ordering activity, shall follow the terms of the applicable schedule and authorization and include with each order –
| (a) | A copy of the authorization from the ordering activity with whom the contractor has the prime contract (unless a copy was previously furnished to the Federal Supply Schedule contractor); and |
| (b) | The following statement: |
This order is placed under written authorization from _______ dated _______. In the event of any inconsistency between the terms and conditions of this order and those of your Federal Supply Schedule contract, the latter will govern.
| 25. | INSURANCE—WORK ON A GOVERNMENT INSTALLATION (JAN 1997)(FAR 52.228-5)28.310 |
| (a) | The Contractor shall, at its own expense, provide and maintain during the entire performance of this contract, at least the kinds and minimum amounts of insurance required in the Schedule or elsewhere in the contract. |
| (b) | Before commencing work under this contract, the Contractor shall notify the Contracting Officer in writing that the required insurance has been obtained. The policies evidencing required insurance shall contain an endorsement to the effect that any cancellation or any material change adversely affecting the Government's interest shall not be effective— |
| (1) | For such period as the laws of the State in which this contract is to be performed prescribe; or |
| (2) | Until 30 days after the insurer or the Contractor gives written notice to the Contracting Officer, whichever period is longer. |
| (c) | The Contractor shall insert the substance of this clause, including this paragraph (c), in subcontracts under this contract that require work on a Government installation and shall require subcontractors to provide and maintain the insurance required in the Schedule or elsewhere in the contract. The Contractor shall maintain a copy of all subcontractors' proofs of required insurance, and shall make copies available to the Contracting Officer upon request. |
26. SOFTWARE INTEROPERABILITY.
Offerors are encouraged to identify within their software items any component interfaces that support open standard interoperability. An item’s interface may be identified as interoperable on the basis of participation in a Government agency-sponsored program or in an independent organization program. Interfaces may be identified by reference to an interface registered in the component registry located at http://www.core.gov.
27. ADVANCE PAYMENTS
A payment under this contract to provide a service or deliver an article for the United States Government may not be more than the value of the service already provided or the article already delivered. Advance or pre-payment is not authorized or allowed under this contract. (31 U.S.C. 3324)
TERMS AND CONDITIONS APPLICABLE TO INFORMATION TECHNOLOGY (IT)
PROFESSIONAL SERVICES (SPECIAL ITEM NUMBER 132-51)
| 1. | SCOPE |
| a. | The prices, terms and conditions stated under Special Item Number 132-51 Information Technology Professional Services and Special Item Number 132-52 Electronic Commerce Services apply exclusively to IT Services within the scope of this Information Technology Schedule. |
| b. | The Contractor shall provide services at the Contractor’s facility and/or at the ordering activity location, as agreed to by the Contractor and the ordering activity. |
| 2. | PERFORMANCE INCENTIVES |
| a. | Performance incentives may be agreed upon between the Contractor and the ordering activity on individual fixed price orders or Blanket Purchase Agreements under this contract in accordance with this clause. |
| b. | The ordering activity must establish a maximum performance incentive price for these services and/or total solutions on individual orders or Blanket Purchase Agreements. |
| c. | Incentives should be designed to relate results achieved by the contractor to specified targets. To the maximum extent practicable, ordering activities shall consider establishing incentives where performance is critical to the ordering activity’s mission and incentives are likely to motivate the contractor. Incentives shall be based on objectively measurable tasks. |
| 3. | ORDER |
| a. | Agencies may use written orders, EDI orders, blanket purchase agreements, individual purchase orders, or task orders for ordering services under this contract. Blanket Purchase Agreements shall not extend beyond the end of the contract period; all services and delivery shall be made and the contract terms and conditions shall continue in effect until the completion of the order. Orders for tasks which extend beyond the fiscal year for which funds are available shall include FAR 52.232-19 (Deviation – May 2003) Availability of Funds for the Next Fiscal Year. The purchase order shall specify the availability of funds and the period for which funds are available. |
| b. | All task orders are subject to the terms and conditions of the contract. In the event of conflict between a task order and the contract, the contract will take precedence. |
| 4. | PERFORMANCE OF SERVICES |
| a. | The Contractor shall commence performance of services on the date agreed to by the Contractor and the ordering activity. |
| b. | The Contractor agrees to render services only during normal working hours, unless otherwise agreed to by the Contractor and the ordering activity. |
| c. | The ordering activity should include the criteria for satisfactory completion for each task in the Statement of Work or Delivery Order. Services shall be completed in a good and workmanlike manner. |
| d. | Any Contractor travel required in the performance of IT Services must comply with the Federal Travel Regulation or Joint Travel Regulations, as applicable, in effect on the date(s) the travel is performed. Established Federal Government per diem rates will apply to all Contractor travel. Contractors cannot use GSA city pair contracts. |
| 5. | STOP-WORK ORDER (FAR 52.242-15) (AUG 1989) |
| (a) | The Contracting Officer may, at any time, by written order to the Contractor, require the Contractor to stop all, or any part, of the work called for by this contract for a period of 90 days after the order is delivered to the Contractor, and for any further period to which the parties may agree. The order shall be specifically identified as a stop-work order issued under this clause. Upon receipt of the order, the Contractor shall immediately comply with its terms and take all reasonable steps to minimize the incurrence of costs allocable to the work covered by the order during the period of work stoppage. Within a period of 90 days after a stop-work is delivered to the Contractor, or within any extension of that period to which the parties shall have agreed, the Contracting Officer shall either- |
| (1) | Cancel the stop-work order; or |
| (2) | Terminate the work covered by the order as provided in the Default, or the Termination for Convenience of the Government, clause of this contract. |
| (b) | If a stop-work order issued under this clause is canceled or the period of the order or any extension thereof expires, the Contractor shall resume work. The Contracting Officer shall make an equitable adjustment in the delivery schedule or contract price, or both, and the contract shall be modified, in writing, accordingly, if- |
| (1) | The stop-work order results in an increase in the time required for, or in the Contractor's cost properly allocable to, the performance of any part of this contract; and |
| (2) | The Contractor asserts its right to the adjustment within 30 days after the end of the period of work stoppage; provided, that, if the Contracting Officer decides the facts justify the action, the Contracting Officer may receive and act upon the claim submitted at any time before final payment under this contract. |
| (c) | If a stop-work order is not canceled and the work covered by the order is terminated for the convenience of the Government, the Contracting Officer shall allow reasonable costs resulting from the stop-work order in arriving at the termination settlement. |
| (d) | If a stop-work order is not canceled and the work covered by the order is terminated for default, the Contracting Officer shall allow, by equitable adjustment or otherwise, reasonable costs resulting from the stop-work order. |
6. INSPECTION OF SERVICES
The Inspection of Services–Fixed Price (AUG 1996) (Deviation – May 2003) clause at FAR 52.246-4 applies to firm-fixed price orders placed under this contract. The Inspection–TimeandMaterials and Labor-Hour (JAN 1986) (Deviation – May 2003) clause at FAR 52.246-6 applies to timeandmaterials and laborhour orders placed under this contract.
7. RESPONSIBILITIES OF THE CONTRACTOR
The Contractor shall comply with all laws, ordinances, and regulations (Federal, State, City, or otherwise) covering work of this character. If the end product of a task order is software, then FAR 52.227-14 (Deviation – May 2003) Rights in Data – General, may apply.
8. RESPONSIBILITIES OF THE ORDERING ACTIVITY
Subject to security regulations, the ordering activity shall permit Contractor access to all facilities necessary to perform the requisite IT Services.
9. INDEPENDENT CONTRACTOR
All IT Services performed by the Contractor under the terms of this contract shall be as an independent Contractor, and not as an agent or employee of the ordering activity.
| 10. | ORGANIZATIONAL CONFLICTS OF INTEREST |
| a. | Definitions. |
“Contractor” means the person, firm, unincorporated association, joint venture, partnership, or corporation that is a party to this contract.
“Contractor and its affiliates” and “Contractor or its affiliates” refers to the Contractor, its chief executives, directors, officers, subsidiaries, affiliates, subcontractors at any tier, and consultants and any joint venture involving the Contractor, any entity into or with which the Contractor subsequently merges or affiliates, or any other successor or assignee of the Contractor.
An “Organizational conflict of interest” exists when the nature of the work to be performed under a proposed ordering activity contract, without some restriction on ordering activities by the Contractor and its affiliates, may either (i) result in an unfair competitive advantage to the Contractor or its affiliates or (ii) impair the Contractor’s or its affiliates’ objectivity in performing contract work.
| b. | To avoid an organizational or financial conflict of interest and to avoid prejudicing the best interests of the ordering activity, ordering activities may place restrictions on the Contractors, its affiliates, chief executives, directors, subsidiaries and subcontractors at any tier when placing orders against schedule contracts. Such restrictions shall be consistent with FAR 9.505 and shall be designed to avoid, neutralize, or mitigate organizational conflicts of interest that might otherwise exist in situations related to individual orders placed against the schedule contract. Examples of situations, which may require restrictions, are provided at FAR 9.508. |
| 11. | INVOICES |
The Contractor, upon completion of the work ordered, shall submit invoices for IT services. Progress payments may be authorized by the ordering activity on individual orders if appropriate. Progress payments shall be based upon completion of defined milestones or interim products. Invoices shall be submitted monthly for recurring services performed during the preceding month.
12. PAYMENTS
For firm-fixed price orders the ordering activity shall pay the Contractor, upon submission of proper invoices or vouchers, the prices stipulated in this contract for service rendered and accepted. Progress payments shall be made only when authorized by the order. For timeandmaterials orders, the Payments under TimeandMaterials and LaborHour Contracts at FAR 52.232-7 (DEC 2002), (Alternate II – Feb 2002) (Deviation – May 2003) applies to timeandmaterials orders placed under this contract. For laborhour orders, the Payment under TimeandMaterials and LaborHour Contracts at FAR 52.232-7 (DEC 2002), (Alternate II – Feb 2002) (Deviation – May 2003)) applies to laborhour orders placed under this contract. 52.216-31(Feb 2007) Time-and-Materials/Labor-Hour Proposal Requirements—Commercial Item Acquisition. As prescribed in 16.601(e)(3), insert the following provision:
(a) The Government contemplates award of a Time-and-Materials or Labor-Hour type of contract resulting from this solicitation.
(b) The offeror must specify fixed hourly rates in its offer that include wages, overhead, general and administrative expenses, and profit. The offeror must specify whether the fixed hourly rate for each labor category applies to labor performed by—
(1) The offeror;
(2) Subcontractors; and/or
(3) Divisions, subsidiaries, or affiliates of the offeror under a common control.
13. RESUMES
Resumes shall be provided to the GSA Contracting Officer or the user ordering activity upon request.
14. INCIDENTAL SUPPORT COSTS
Incidental support costs are available outside the scope of this contract. The costs will be negotiated separately with the ordering activity in accordance with the guidelines set forth in the FAR.
15. APPROVAL OF SUBCONTRACTS
The ordering activity may require that the Contractor receive, from the ordering activity's Contracting Officer, written consent before placing any subcontract for furnishing any of the work called for in a task order.
16. DESCRIPTION OF IT SERVICES AND PRICING
Labor Category Descriptions are listed at the end of this document.
GSA Pricelist
SIN 132-51
| SIN |
| Labor Category |
| GSA Rate w/IFF 9/18/13 - 9/17/14 |
| GSA Rate w/IFF 9/18/14 - 9/17/15 |
| GSA Rate w/IFF 9/18/15 - 9/17/16 |
| GSA Rate w/IFF 9/18/16 - 9/17/17 |
| GSA Rate w/IFF 9/18/17 - 9/17/18 |
| 132-51 |
| Analytical Consultant 3 |
| $161.79 |
| $167.46 |
| $173.32 |
| $179.39 |
| $185.68 |
| 132-51 |
| Analytical Consultant 4 |
| $197.44 |
| $204.35 |
| $211.51 |
| $218.92 |
| $226.58 |
| 132-51 |
| Developer-Software Engineer 2 |
| $161.79 |
| $167.46 |
| $173.32 |
| $179.39 |
| $185.68 |
| 132-51 |
| Developer-Software Engineer 3 |
| $180.08 |
| $186.39 |
| $192.92 |
| $199.67 |
| $206.66 |
| 132-51 |
| Program/Project Manager |
| $198.15 |
| $205.09 |
| $212.28 |
| $219.71 |
| $227.40 |
| 132-51 |
| Senior Software Architect |
| $215.39 |
| $222.93 |
| $230.74 |
| $238.82 |
| $247.18 |
| 132-51 |
| Senior Software Engineer |
| $198.15 |
| $205.09 |
| $212.28 |
| $219.71 |
| $227.40 |
| 132-51 |
| Subject Matter Expert |
| $247.70 |
| $256.38 |
| $265.35 |
| $274.65 |
| $284.26 |
Subject Matter Expert Education : Masters,in Information Systems, Engineering, Business, Political Science, or related discipline Experience: 10 Years Funtional Responsibility: •
· Provides technical knowledge and analysis of highly specialized applications and operational environments, high-level functional systems analysis, design, integration, documentation and implementation advice on exceptionally complex problems that need extensive knowledge of the subject matter for effective implementation
· Participates as needed in all phases of software development with emphasis on the planning, analysis, testing, integration, documentation, and presentation phases
· Provide intelligence expertise and support in CONUS and OCONUS arenas with respect to an intelligence initiative
· Support intelligence operations
· 10 years experience in increasingly responsible positions in the military, academic, or defense industry arena working with senior-level government officials and equivalent personnel
· Highly proficient with briefing executive level government and contractor personnel
· Substantial research in data mining, link analysis, database architecture, and collaborative information systems
· Play an integral role through oversight and testing of new hardware and software solutions
· Skilled in information systems, architecture, software, and software development
· Highly knowledgable regarding programming and development technologies
· Experience in facets of managing large dynamic projects with multi-level deliverables
Analytical Consultant3 Education: Bachelor's in Information Systems, Engineering, Business, Political Science, or related discipline Experience: 5-8 years Functional Responsibility:
· Analyzes process and re-engineering, with an understanding of policy and technical problems and solutions as they relate to the current and future business environment
· Creates process change by integration new processes with existing ones and communicating these changes to appropriate teams
· Recommends and facilitates quality improvement efforts
· Document, according to the customer-defined standard, test procedures and results
· Provide intelligence expertise and support in CONUS and OCONUS arenas with respect to an intelligence initiative
· Support intelligence operations
· 5 year minimum experience in intelligence operations and intelligence policy and regulations (deployed experience preferred)
· Proficient in briefing senior government and contractor personnel
· Knowledgeable of processes to perform network engineering functions including: conceptualization, design, implementation, and optimization
· Must be knowledgeable of assessing evolving user needs, translating those needs into network changes through network reconfiguration, hardware and software acquisitions, installation and test
· Must be knowledgeable in the application of current and emerging network software and hardware technology and protocols
Analytical Consultant4 Education: Bachelor's in Information Systems, Engineering, Business, Political Science, or related discipline Experience: 8-10 years Functional Responsibility:
· Analyzes process and re-engineering, with an understanding of policy and technical problems and solutions as they relate to the current and future business environment
· Creates process change by integration new processes with existing ones and communicating these changes to appropriate teams
· Recommends and facilitates quality improvement efforts
· Document, according to the customer-defined standard, test procedures and results
· Provide intelligence expertise and support in CONUS and OCONUS arenas with respect to an intelligence initiative
· Support intelligence operations
· 8 year minimum experience in intelligence operations and intelligence policy and regulations (deployed experience preferred)
· Proficient in briefing senior government and contractor personnel
· Knowledgeable of processes to perform network engineering functions including: conceptualization, design, implementation, and optimization
· Must be knowledgeable of assessing evolving user needs, translating those needs into network changes through network reconfiguration, hardware and software acquisitions, installation and test
· Must be knowledgeable in the application of current and emerging network software and hardware technology and protocols
Developer - Software Engineer2 *
Education: Bachelor's in Computer Science, Information Systems, Engineering, Business, or related scientific or technical discipline Experience: 3-5 years Functional Responsibility:
· Design, develop, and test application software to fulfill unique requirements on Windows, Unix, or other specified problems
· Build applications using a specified programming language per the customer
· Min 3 years experience developing with scripting, functional and/or object-oriented programming languages
· Min 1 year experience developing Windows applications using Visual Studio or .NET environment
· Min 1 year experience developing Unix applications using make files or comparable build environment
· Demonstrated ability to develop a complex program using Perl, C, C++, Java, or other comparable languages
· Demonstrated ability to build a graphical user interface (GUI) using Java, C#, or comparable language
Developer -Software Engineer3
Education: Bachelor's in Computer Science, Information Systems, Engineering, Business, or related scientific or technical discipline Experience: 5-8 years Functional Responsibility:
· Design, develop, and test application software to fulfill unique requirements on Windows, Unix, or other specified problems
· Build applications using a specified programming language per the customer
· Build Graphic User Interfaces for custom applications
· Respond to evolving requirements in an agile environment
· Min 5 years experience developing with scripting, functional and/or object-oriented programming languages
· Min 1 year experience developing Windows applications using Visual Studio or .NET environment
· Min 1 year experience developing Unix applications using make files or comparable build environment
· Demonstrated ability to develop a complex program using Perl, C, C++, Java, or other comparable languages
· Demonstrated ability to build a graphical user interface (GUI) using Java, C#, or comparable language
Senior Software Engineer
Education: Bachelor's in Computer Science, Information Systems, Engineering, Business, or related scientific or technical discipline Experience: 8-10 years Functional Responsibility:
· Design, develop, and test application software to fulfill unique requirements on Windows, Unix, or other specified problems
· Build applications using a specified programming language per the customer
· Build Graphic User Interfaces for custom applications
· Respond to evolving requirements in an aglie environment
· Provides functional and empirical analysis related to the design, development, and implementation of software systems, including, but not limited to application software, utility software, development software, and diagnostic software
· Participates in the development of test strategies, devices, and systems
• Leads team to design, develop, and test application software to fulfill unique requirements on Windows, Univ, or other specified platforms
· Min 8 years experience developing with scripting, functional and/or object-oriented programming languages
· Min 5 years experience developing Windows applications using Visual Studio or .NET environment or UNIX experience
· Demonstrated ability to develop a complex program using object oriented programming in languages such as Perl, C, C++, Java
· Demonstrated ability to build a graphical user interface (GUI) using Java, C#, or comparable language
· Demonstrated ability to lead a project involving scoping, designing, building and managing developers on a single software project
· Demonstrated ability to execute a complete software life cycle (requirements, design, develop, test, validate, deploy)
Senior Software Architect
Education: Bachelor's in Computer Science, Information Systems, Engineering, Business, or related scientific or technical discipline Experience: 8-10 years Functional Responsibility:
· Must have detailed knowledge of modern software development processes, to include object-oriented development and use of tools, and how to apply them to software application program development
· Must be capable of providing detailed technical support for software development programs with minimal management supervision
· Must be capable of translating operational requirements into detailed software/system requirements
· Must be capable of integrating products into software/system architectures
· Must be able to rapidly understand the use of tools and technologies and integrate them into existing products and processes
· Must have knowledge of distributed systems, and issues regarding database replication and distribution for distributed systems
· Must be capable of providing technical direction to design and development teams, and monitoring progress and productivity through the use of metrics
· Must have a general understanding of communications protocols, and be able to quickly understand the customer's technical guidelines • Min 8 years experience developing with scripting, functional and/or object-oriented programming languages
· Min 5 years experience developing Windows applications using Visual Studio or .NET environment or UNIX experience
· Demonstrated ability to develop a complex program using object oriented programming in languages such as Perl, C, C++, Java
· Demonstrated ability to build a graphical user interface (GUI) using Java, C#, or comparable language.
· Demonstrated ability to lead a project that develops complex software functionality
· Demonstrated ability to execute a complete software life cycle (requirements, design, develop, test, validate, deploy)
· Demonstrated ability to capture organizational data flows, enterprise-level business process (BP) requirements and (re)engineer BPs to harness emerging technologies as associated with enterprise modernization or legacy system integration
· Demonstrated ability to develop overarching solutions through the integration of various technologies
Program/Project Manager
Education: Bachelor's in Computer Science, Information Systems, Engineering, Business, or related scientific or technical discipline Experience: Based on experience and education Functional Responsibility:
· Direct and oversee the planning, execution and performance of all contractor activities associated with the contract
· Serve as the primary representative of the contractor and interface with the govt regarding status of all contractor program and technical activities and all problems, issues or conflicts requiring resolution
· Manage cost, schedule, and performance through the completion of tasks within estimated timeframes and budget constraints
· Schedule and assign duties to subordinate contractors and subcontractors as required and ensure assignments are completed as directed
· Enforce work standards and review and resolve work discrepancies to ensure compliance with contract requirements
· Have ultimate responsibility for the integrity of all work performed and all deliverables received • Significant experience in the federal government acquisition disciplines, demonstrating progressively more responsible assignments
· Experience directly managing Intelligence Community or DoD sponsored task order contract with multiple projects and contractor teams
· Min 3 years experience in detailed management and oversight of a contractor or government team
· Min 3 years experience in conducting requirements analysis, project costing, deliverable tracking, schedule and financial data monitoring and reporting
· Min 2 years experience reviewing and analyzing Financial Expenditure Reports
· Demonstrable knowledge of and ability to apply the Federal Acquisition Regulations (FAR) and DoD 5000 series regulations
*May consider commensurate and appropriate level of experience in exchange for or in conjunction with education
USA COMMITMENT TO PROMOTE
SMALL BUSINESS PARTICIPATION
PROCUREMENT PROGRAMS
PREAMBLE
BERICO Technologies provides commercial products and services to ordering activities. We are committed to promoting participation of small, small disadvantaged and women-owned small businesses in our contracts. We pledge to provide opportunities to the small business community through reselling opportunities, mentor-protégé programs, joint ventures, teaming arrangements, and subcontracting.
COMMITMENT
To actively seek and partner with small businesses.
To identify, qualify, mentor and develop small, small disadvantaged and women-owned small businesses by purchasing from these businesses whenever practical.
To develop and promote company policy initiatives that demonstrate our support for awarding contracts and subcontracts to small business concerns.
To undertake significant efforts to determine the potential of small, small disadvantaged and women-owned small business to supply products and services to our company.
To insure procurement opportunities are designed to permit the maximum possible participation of small, small disadvantaged, and women-owned small businesses.
To attend business opportunity workshops, minority business enterprise seminars, trade fairs, procurement conferences, etc., to identify and increase small businesses with whom to partner.
To publicize in our marketing publications our interest in meeting small businesses that may be interested in subcontracting opportunities.
We signify our commitment to work in partnership with small, small disadvantaged and women-owned small businesses to promote and increase their participation in ordering activity contracts. To accelerate potential opportunities please contact Dan Janes; dan.janes@bericotechnologies.com; (P) 703.224.8300; (F) 703.224.8306.
BEST VALUE
BLANKET PURCHASE AGREEMENT
FEDERAL SUPPLY SCHEDULE
(Insert Customer Name) In the spirit of the Federal Acquisition Streamlining Act (ordering activity) and (Contractor) enter into a cooperative agreement to further reduce the administrative costs of acquiring commercial items from the General Services Administration (GSA) Federal Supply Schedule Contract(s) ____________________.
Federal Supply Schedule contract BPAs eliminate contracting and open market costs such as: search for sources; the development of technical documents, solicitations and the evaluation of offers. Teaming Arrangements are permitted with Federal Supply Schedule Contractors in accordance with Federal Acquisition Regulation (FAR) 9.6.
This BPA will further decrease costs, reduce paperwork, and save time by eliminating the need for repetitive, individual purchases from the schedule contract. The end result is to create a purchasing mechanism for the ordering activity that works better and costs less.
Signatures
Ordering Activity Date Contractor Date
BPA NUMBER_____________
(CUSTOMER NAME)
BLANKET PURCHASE AGREEMENT
Pursuant to GSA Federal Supply Schedule Contract Number(s)____________, Blanket Purchase Agreements, the Contractor agrees to the following terms of a Blanket Purchase Agreement (BPA) EXCLUSIVELY WITH (ordering activity):
| (1) | The following contract items can be ordered under this BPA. All orders placed against this BPA are subject to the terms and conditions of the contract, except as noted below: | |
| MODEL NUMBER/PART NUMBER | *SPECIAL BPA DISCOUNT/PRICE |
| (2) | Delivery: | |
| DESTINATION | DELIVERY SCHEDULES / DATES |
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .