MAS - Technology, Automation & Management, Inc. - GS35F058DA

AUTHORIZED

INFORMATION TECHNOLOGY SCHEDULE PRICELIST

GENERAL PURPOSE COMMERCIAL INFORMATION TECHNOLOGY

EQUIPMENT, SOFTWARE, AND SERVICES

Special Item No. 54151S Information Technology Professional Services Special Item No. 54151H Health Information Technology Services Special Item No. 511210 Software Licenses

FPDS CODE D301 FPDS CODE D302

FPDS CODE D306 FPDS CODE D307

FPDS CODE D308 FPDS CODE D310

FPDS CODE D311 FPDS CODE 313

FPDS CODE D316 FPDS CODE D399

Note 1: All non-professional labor categories must be incidental to and used solely to support hardware, software and/or professional services, and cannot be purchased separately.

Note 2: Offerors and Agencies are advised that the Group 70 – Information Technology Schedule is not to be used as a means to procure services which properly fall under the Brooks Act. These services include, but are not limited to, architectural, engineering, mapping, cartographic production, remote sensing, geographic information systems, and related services. FAR 36.6 distinguishes between mapping services of an A/E nature and mapping services which are not connected nor incidental to the traditionally accepted A/E Services.

Note 3: This solicitation is not intended to solicit for the reselling of IT Professional Services, except for the provision of implementation, maintenance, integration, or training services in direct support of a product.

Under such circumstances the services must be performance by the publisher or manufacturer or one of their authorized agents.

Technology, Automation & Management, Inc. (TeAM) 8280 Willow Oaks Corporate Drive, Suite 620 Fairfax, VA 22031 www.teamconsult.com

Telephone No. (703) 347-7501

Contract Number: GS-35F-058DA Period Covered by Contract: 11/23/2015 – 11/22/2020

General Services Administration Federal Supply Service

Pricelist current through Modification # PS-0021, dated 05/20/2020.

Products and ordering information in this Authorized FSS INFORMATION TECHNOLOGY Schedule Pricelist are also available on the GSA Advantage ! System.

at http://www.fss.gsa.gov/.

Table of Contents

INFORMATION FOR ORDERING OFFICES

TERMS AND CONDITIONS APPLICABLE TO SOFTWARE LICENSES AND SOFTWARE

MAINTENANCE

(SPECIAL ITEM NUMBER 511210)

TERMS AND CONDITIONS APPLICABLE TO INFORMATION TECHNOLOGY (IT)

PROFESSIONAL SERVICES

(SPECIAL ITEM NUMBER 54151S)

TERMS AND CONDITIONS APPLICABLE TO HEALTH INFORMATION TECHNOLOGY

SERVICES (SPECIAL ITEM NUMBER 54151H)

LABOR CATEGORY DESCRIPTIONS

TeAM GSA Pricelist

BLANKET PURCHASE AGREEMENT FEDERAL SUPPLY SCHEDULE

SOFTWARE LICENSE AGREEMENT

LNKNXTGEN TERMS OF USE

INFORMATION FOR ORDERING OFFICES

SPECIAL NOTICE TO AGENCIES:

Small Business Participation

SBA strongly supports the participation of small business concerns in the Federal Supply Schedules Program. To enhance Small Business Participation SBA policy allows agencies to include in their procurement base and goals, the dollar value of orders expected to be placed against the Federal Supply Schedules, and to report accomplishments against these goals.

For orders exceeding the micro-purchase threshold, FAR 8.404 requires agencies to consider the catalogs/pricelists of at least three schedule contractors or consider reasonably available information by using the GSA Advantage! on-line shopping service (www.fss.gsa.gov). The catalogs/pricelists, GSA Advantage! and the Federal Supply Service Home Page (www.fss.gsa.gov) contain information on a broad array of products and services offered by small business concerns.

This information should be used as a tool to assist ordering activities in meeting or exceeding established small business goals. It should also be used as a tool to assist in including small, small disadvantaged, and women-owned small businesses among those considered when selecting pricelists for a best value determination.

For orders exceeding the micro-purchase threshold, customers are to give preference to small business concerns when two or more items at the same delivered price will satisfy their requirement.

1. Geographic Scope: The geographic scope of this proposal is the 48 contiguous states, District of Columbia, Hawaii, Alaska and Puerto Rico and OCONUS locations.

2. Contractor’s Ordering Address and Payment Information:

Technology, Automation & Management, Inc. (TeAM) 8280 Willow Oaks Corporate Drive, Suite 620 Fairfax, VA 22031

Attn: Accounting Department, Letitia Janifer

Government Purchase cards will be acceptable for payment above the micro-purchase threshold.

In addition, bank account information for wire transfer payments will be shown on the invoice.

The following telephone number can be used by ordering agencies to obtain technical and/ or ordering assistance:

(703) 347-7501, Point of Contact: Letitia Janifer

3. Liability for Injury or Damage

The Contractor shall not be liable for any injury to Government personnel or damage to Government property arising from the use of equipment maintained by the Contractor, unless such injury or damage is due to the fault or negligence of the Contractor.

4. Statistical Data for Government Ordering Office Completion of Standard Form 279:

Block 9: G. Order/Modification Under Federal Schedule Block16: Data Universal Numbering System (DUNS) Number: 14-7004451 Block 30: Type of Contractor- A. Veteran Owned Small Disadvantaged Business Block 31: Woman Owned Business- NO

4a. CAGE Code: 013E5 4b. Contractor has registered with the Central Contractor Registration Database.

5. FOB: Destination (Conus and OConus)

6. Delivery Schedule

TIME OF DELIVERY: The Contractor shall deliver to destination within the number of calendar days after receipt of order (ARO), as set forth below:

SPECIAL ITEM NUMBER DELIVERY TIME (Days ARO)

54151S 30 Days 54151H 30 Days 511210 30 Days

URGENT REQUIREMENTS: when the Federal Supply Schedule contract delivery period does not meet the bona fide urgent delivery requirements of an ordering agency, agencies are encouraged, if time permits, to contact the Contractor for the purpose of obtaining accelerated delivery. The Contractor shall replay to the inquiry within 3 workdays after receipt. (Telephonic replies shall be confirmed by the Contractor in writing.) If the Contractor offers an accelerated delivery frame acceptable to the ordering agency, any order(s) placed pursuant to the agreed upon accelerated delivery time frame shall be delivered within this shorter delivery time and in accordance with all other terms and conditions of the contract.

7. Discounts: Prices shown are NET Prices; Basic Discounts have been deducted.

Prompt Payment: 1% 20 Days/Net 30 days from receipt of invoice or date of acceptance, whichever is later.

Quantity Discount for SIN 511210 o 50-300 users - $29.95 o 301-550 users - $27.95 o 551-800 users - $25.95 o 801-1050 users - $23.95

Quantity Discount for SIN 54151S, 54151H – $50,000 - $69,999 – Additional 1% $70,000 - $99,000 – Additional 2% $100,000 or greater – Additional 2.5%

Dollar Volume – None Government Educational Institutions – offered the same discounts as all other

Government customers.

Discount for use of Government Commercial Credit Card – None.

Other – None.

8. Trade Agreements Act of 1979, as amended:

All items are U.S. made end products, designated country end products, Caribbean Basin country end products, Canadian end products, or Mexican end products as defined in the Trade Agreements Act of 1979, as amended.

9. Statement Concerning Availability of Export Packing: N/A.

10. Small Requirements:

The minimum dollar value of orders to be issued is $100.00 per order.

11. Maximum Order:

(All dollar amounts are exclusive of any discount for prompt payment.) The maximum for the following Special Item Numbers (SINs) is:

Special Item 54151S - $500,000 Special Item 54151H - $500,000 Special Item 511210 - $500,000

12. USE OF FEDERAL SUPPLY SERVICE INFORMATION TECHNOLOGY

SCHEDULE CONTRACTS.

Ordering activities shall use the ordering procedures of Federal Acquisition Regulations FAR

8.405 when placing an order or establishing a BPA for supplies or services. These procedures apply to all schedules.

Orders placed pursuant to a Multiple Award Schedule (MAS), using the procedures in FAR 8.404, are considered to be issued pursuant to full and open competition. Therefore, when placing orders under Federal Supply Schedules, ordering offices need not seek further competition, synopsize the requirement, make a separate determination of fair and reasonable pricing, or consider small business set-asides in accordance with subpart 19.5. GSA has already determined the prices of items under schedule contracts to be fair and reasonable. By placing an order against a schedule using the procedures outlined below, the ordering office has concluded that the order represents the best value and results in the lowest overall cost alternative (considering price, special features, administrative costs, etc.) to meet the Government’s needs.

FAR 8.405-1 Ordering procedures for supplies, and services not requiring a Statement of Work.

FAR 8.405-2 Ordering procedures for services requiring a Statement of Work.

13. FEDERAL INFORMATION TECHNOLOGY/TELECOMMUNICATION STANDARDS

REQUIREMENTS:

Federal departments and agencies acquiring products from this Schedule must comply with the provisions of the Federal Standards Program, as appropriate (reference: NIST Federal Standards Index). Inquiries to determine whether or not specific products listed herein comply with Federal Information Processing Standards (FIPS) or Federal Telecommunication Standards (FED-STDS), which are cited by ordering offices, shall be responded to promptly by the Contractor.

13.1 FEDERAL INFORMATION PROCESSING STANDARDS

PUBLICATIONS (FIPS PUBS):

Information Technology products under this Schedule that do not conform to Federal Information Processing Standards (FIPS) should not be acquired unless a waiver has been granted in accordance with the applicable "FIPS Publication."

Federal Information Processing Standards Publications (FIPS PUBS) are issued by the U.S. Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security Act. Information concerning their availability and applicability should be obtained from the National Technical Information Service (NTIS), 5285 Port Royal Road, Springfield, Virginia 22161.

FIPS PUBS include voluntary standards when these are adopted for Federal use.

Individual orders for FIPS PUBS should be referred to the NTIS Sales Office, and orders for subscription service should be referred to the NTIS Subscription Officer, both at the above address, or telephone number (703) 487-4650.

13.2FEDERAL TELECOMMUNICATION STANDARDS (FED-STDS):

Telecommunication products under this Schedule that do not conform to Federal Telecommunication Standards (FED-STDS) should not be acquired unless a waiver has been granted in accordance with the applicable "FED-STD." Federal Telecommunication Standards are issued by the U.S. Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security Act. Ordering information and information concerning the availability of FED-STDS should be obtained from the GSA, Federal Supply Service, Specification Section, 470 East L’Enfant Plaza, Suite 8100, SW, Washington, DC 20407, telephone number (202) 619-8925. Please include a self-addressed mailing label when requesting information by mail. Information concerning their applicability can be obtained by writing or calling the U.S. Department of Commerce, National Institute of Standards and Technology, Gaithersburg, MD 20899, telephone number (301) 975-2833.

14. SECURITY REQUIREMENTS.

In the event security requirements are necessary, the ordering activities may incorporate, in their delivery orders, a security clause in accordance with current laws, regulations, and individual agency policy; however, the burden of administering the security requirements shall be with the ordering agency. If any costs are incurred as a result of the inclusion of security requirements, such costs will not exceed ten percent (10%) or $100,000, of the total dollar value of the order, whichever is less.

(a) Security Clearances: The Contractor may be required to obtain/possess varying levels of security clearances in the performance of orders issued under this contract.

All costs associated with obtaining/possessing such security clearances should be factored into the price offered under the Multiple Award Schedule.

(b) Travel: The Contractor may be required to travel in performance of orders issued under this contract. Allowable travel and per diem charges are governed by Pub .L. 99-234 and FAR Part 31, and are reimbursable by the ordering agency or can be priced as a fixed price item on orders placed under the Multiple Award

Schedule. Travel in performance of a task order will only be reimbursable to the extent authorized by the ordering agency. The Industrial Funding Fee does NOT apply to travel and per diem charges.

(c) Certifications, Licenses and Accreditations: As a commercial practice, the Contractor may be required to obtain/possess any variety of certifications, licenses and accreditations for specific FSC/service code classifications offered. All costs associated with obtaining/ possessing such certifications, licenses and accreditations should be factored into the price offered under the Multiple Award Schedule program.

(d) Insurance: As a commercial practice, the Contractor may be required to obtain/possess

15. CONTRACT ADMINISTRATION FOR ORDERING OFFICES:

Any ordering office, with respect to any one or more delivery orders placed by it under this contract, may exercise the same rights of termination as might the GSA Contracting Officer under provisions of FAR 52.212-4, paragraphs (l) Termination for the Government’s convenience, and (m) Termination for Cause (See 52.212-4.)

16. GSA Advantage!

GSA Advantage! is an on-line, interactive electronic information and ordering system that provides on-line access to vendors' schedule prices with ordering information. GSA Advantage! will allow the user to perform various searches across all contracts including, but not limited to:

(1) Manufacturer;

(2) Manufacturer's Part Number; and

(3) Product categories.

Agencies can browse GSA Advantage! by accessing the Internet World Wide Web utilizing a browser (ex.: NetScape). The Internet address is http://www.gsaadvantage.gov.

17. PURCHASE OF OPEN MARKET ITEMS

NOTE: Open Market Items are also known as incidental items, non-contract items, non- Schedule items, and items not on a Federal Supply Schedule contract. ODCs (Other Direct Costs) are not part of this contract and should be treated at open market purchases. Ordering Activities procuring open market items must follow FAR 8.401(d).

For administrative convenience, an ordering office contracting officer may add items not on the Federal Supply Multiple Award Schedule (MAS) -- referred to as open market items -- to a Federal Supply Schedule blanket purchase agreement (BPA) or an individual task or delivery order, only if-

(1) All applicable acquisition regulations pertaining to the purchase of the items not on the Federal Supply Schedule have been followed (e.g., publicizing (Part 5), competition requirements (Part 6), acquisition of commercial items (Part 12), contracting methods (Parts 13, 14, and 15), and small business programs (Part 19));

(2) The ordering office contracting officer has determined the price for the items not on the Federal Supply Schedule is fair and reasonable;

(3) The items are clearly labeled on the order as items not on the Federal Supply Schedule; and

(4) All clauses applicable to items not on the Federal Supply Schedule are included in the order.

18. CONTRACTOR COMMITMENTS, WARRANTIES AND REPRESENTATIONS

a. For the purpose of this contract, commitments, warranties and representations include, in addition to those agreed to for the entire schedule contract:

(1) Time of delivery/installation quotations for individual orders;

(2) Technical representations and/or warranties of products concerning performance, total system performance and/or configuration, physical, design and/or functional characteristics and capabilities of a product/equipment/ service/software package submitted in response to requirements which result in orders under this schedule contract.

(3) Any representations and/or warranties concerning the products made in any literature, description, drawings and/or specifications furnished by the Contractor.

b. The above is not intended to encompass items not currently covered by the GSA Schedule contract.

19. OVERSEAS ACTIVITIES

The terms and conditions of this contract shall apply to all orders for installation, maintenance and repair of equipment in areas listed in the pricelist outside the 48 contiguous states and the District of Columbia, except as indicated below:

N/A

Upon request of the Contractor, the Government may provide the Contractor with logistics support, as available, in accordance with all applicable Government regulations. Such Government support will be provided on a reimbursable basis, and will only be provided to the Contractor's technical personnel whose services are exclusively required for the fulfillment of the terms and conditions of this contract.

20. BLANKET PURCHASE AGREEMENTS (BPAs)

The use of BPAs under any schedule contract to fill repetitive needs for supplies or services is allowable. BPAs may be established with one or more schedule contractors. The number of BPAs to be established is within the discretion of the ordering activity establishing the BPA and should be based on a strategy that is expected to maximize the effectiveness of the BPA(s). Ordering activities shall follow FAR 8.405-3 when creating and implementing BPA(s).

21. CONTRACTOR TEAM ARRANGEMENTS

Contractors participating in contractor team arrangements must abide by all terms and conditions of their respective contracts. This includes compliance with Clauses 552.238- 74, Industrial Funding Fee and Sales Reporting, i.e., each contractor (team member) must report sales and remit the IFF for all products and services provided under its individual contract.

22. INSTALLATION, DEINSTALLATION, REINSTALLATION

The Davis-Bacon Act (40 U.S.C. 276a-276a-7) provides that contracts in excess of $2,000 to which the United States or the District of Columbia is a party for construction, alteration, or repair (including painting and decorating) of public buildings or public works with the United States, shall contain a clause that no laborer or mechanic employed directly upon the site of the work shall received less than the prevailing wage rates as determined by the Secretary of Labor. The requirements of the Davis-Bacon Act do not apply if the construction work is incidental to the furnishing of supplies, equipment, or services. For example, the requirements do not apply to simple installation or alteration of a public building or public work that is incidental to furnishing supplies or equipment under a supply contract. However, if the construction, alteration or repair is segregable and exceeds $2,000, then the requirements of the Davis-Bacon Act applies.

The requisitioning activity issuing the task order against this contract will be responsible for proper administration and enforcement of the Federal labor standards covered by the Davis-Bacon Act. The proper Davis-Bacon wage determination will be issued by the ordering activity at the time a request for quotations is made for applicable construction classified installation, deinstallation, and reinstallation services under SIN 132-8 or 132- 9.

23. SECTION 508 COMPLIANCE.

If applicable, Section 508 compliance information on the supplies and services in this contract are available in Electronic and Information Technology (EIT) at the following:

www.teamconsult.com

24. PRIME CONTRACTOR ORDERING FROM FEDERAL SUPPLY

SCHEDULES.

Prime Contractors (on cost reimbursement contracts) placing orders under Federal Supply Schedules, on behalf of a Federal Agency, shall follow the terms of the applicable schedule and authorization and include with each order –

(a) A copy of the authorization from the Agency with whom the contractor has the prime contract (unless a copy was previously furnished to the Federal Supply Schedule contractor); and

(b) The following statement:

This order is placed under written authorization from dated . In the event of any inconsistency between the terms and conditions of this order and those of your Federal Supply Schedule contract, the latter will govern.

25. INSURANCE-WORK ON A GOVERNMENT INSTALLATION (JAN 1997)

(FAR 52.228-5)

(a) The Contractor shall, at its own expense, provide and maintain during the entire performance of this contract, at least the kinds and minimum amounts of insurance required in the Schedule or elsewhere in the contract.

(b) Before commencing work under this contract, the Contractor shall notify the Contracting Officer in writing that the required insurance has been obtained. The policies evidencing required insurance shall contain an endorsement to the effect that any cancellation or any material change adversely affecting the Government's interest shall not be effective—

(1) For such period as the laws of the State in which this contract is to be performed prescribe; or

(2) Until 30 days after the insurer or the Contractor gives written notice to the Contracting Officer, whichever period is longer.

(c) The Contractor shall insert the substance of this clause, including this paragraph (c), in subcontracts under this contract that require work on a Government installation and shall require subcontractors to provide and maintain the insurance required in the Schedule or elsewhere in the contract. The Contractor shall maintain a copy of all subcontractors' proofs of required insurance, and shall make copies available to the Contracting Officer upon request.

26. SOFTWARE INTEROPERABILITY.

Offerors are encouraged to identify within their software items any component interfaces that support open standard interoperability. An item’s interface may be identified as interoperable on the basis of participation in a Government agency-sponsored program or in an independent organization program. Interfaces may be identified by reference to an interface registered in the component registry located at http://www.core.gov.

27. ADVANCE PAYMENTS

A payment under this contract to provide a service or deliver an article for the United States Government may not be more than the value of the service already provided or the article already delivered. Advance or pre-payment is not authorized or allowed under this contract. (31 U.S.C. 3324).

TERMS AND CONDITIONS APPLICABLE TO SOFTWARE

LICENSES AND SOFTWARE MAINTENANCE

(SPECIAL ITEM NUMBER 511210)

INSPECTION/ACCEPTANCE

The Contractor shall only tender for acceptance those items that conform to the requirements of this contract.

The ordering activity reserves the right to inspect or test any software that has been tendered for acceptance. The ordering activity may require repair or replacement of nonconforming software at no increase in contract price. The ordering activity must exercise its post acceptance rights (1) within a reasonable time after the defect was discovered or should have been discovered; and (2) before any substantial change occurs in the condition of the software, unless the change is due to the defect in the software.

2. ENTERPRISE USER LICENSE AGREEMENTS REQUIREMENTS (EULA)

The Contractor shall provide all Enterprise User License Agreements in an editable Microsoft Office (Word) format.

3. GUARANTEE/WARRANTY

a. Unless specified otherwise in this contract, the Contractor’s standard commercial guarantee/warranty as stated in the contract’s commercial pricelist will apply to this contract.

b. The Contractor warrants and implies that the items delivered hereunder are merchantable and fit for use for the particular purpose described in this contract.

c. Limitation of Liability. Except as otherwise provided by an express or implied warranty, the Contractor will not be liable to the ordering activity for consequential damages resulting from any defect or deficiencies in accepted items.

4. TECHNICAL SERVICES

The Contractor, without additional charge to the ordering activity, shall provide a hot line technical support number for the purpose of providing user assistance and guidance in the implementation of the software.

5. SOFTWARE MAINTENANCE

a. Software maintenance as it is defined: (select software maintenance type) :

X . Software Maintenance as a Product (SIN 511210)

Software maintenance as a product includes the publishing of bug/defect fixes via patches and updates/upgrades in function and technology to maintain the operability and usability of the software product. It may also include other no charge support that are included in the purchase price of the product in the commercial marketplace. No charge support includes items such as user blogs, discussion forums, on-line help libraries and FAQs (Frequently Asked Questions), hosted chat rooms, and limited telephone, email and/or web-based general technical support for user’s self diagnostics.

Software maintenance as a product does NOT include the creation, design, implementation, integration, etc. of a software package. These examples are considered software maintenance as a service.

Software Maintenance as a product is billed at the time of purchase.

X 2. Software Maintenance as a Service (SIN 511210)

Software maintenance as a service creates, designs, implements, and/or integrates customized changes to software that solve one or more problems and is not included with the price of the software. Software maintenance as a service includes person-to-person communications regardless of the medium used to communicate: telephone support, on-line technical support, customized support, and/or technical expertise which are charged commercially. Software maintenance as a service is billed arrears in accordance with 31 U.S.C. 3324.

Software maintenance as a service is billed in arrears in accordance with 31 U.S.C. 3324.

b. Invoices for maintenance service shall be submitted by the Contractor on a quarterly or monthly basis, after the completion of such period. Maintenance charges must be paid in arrears (31 U.S.C. 3324). PROMPT PAYMENT DISCOUNT, IF APPLICABLE, SHALL BE

SHOWN ON THE INVOICE.

6. PERIODS OF TERM LICENSES (SIN 511210) AND MAINTENANCE (SIN

54151)

a. The Contractor shall honor orders for periods for the duration of the contract period or a lessor period of time.

b. Term licenses and/or maintenance may be discontinued by the ordering activity on thirty (30) calendar days written notice to the Contractor.

c. Annual Funding. When annually appropriated funds are cited on an order for term licenses and/or maintenance, the period of the term licenses and/or maintenance shall automatically expire on September 30 of the contract period, or at the end of the contract period, whichever occurs first. Renewal of the term licenses and/or maintenance orders citing the new appropriation shall be required, if the term licenses and/or maintenance is to be continued during any remainder of the contract period.

d. Cross-Year Funding Within Contract Period. Where an ordering activity’s specific appropriation authority provides for funds in excess of a 12 month (fiscal year) period, the ordering activity may place an order under this schedule contract for a period up to the expiration of the contract period, notwithstanding the intervening fiscal years.

e. Ordering activities should notify the Contractor in writing thirty (30) calendar days prior to the expiration of an order, if the term licenses and/or maintenance is to be terminated at that time. Orders for the continuation of term licenses and/or maintenance will be required if the term licenses and/or maintenance is to be continued during the subsequent period.

7. CONVERSION FROM TERM LICENSE TO PERPETUAL LICENSE – NOT

APPLICABLE

a. The ordering activity may convert term licenses to perpetual licenses for any or all software at any time following acceptance of software. At the request of the ordering activity the Contractor shall furnish, within ten (l0) calendar days, for each software product that is contemplated for conversion, the total amount of conversion credits which have accrued while the software was on a term license and the date of the last update or enhancement.

b. Conversion credits which are provided shall, within the limits specified, continue to accrue from one contract period to the next, provided the software remains on a term license within the ordering activity.

c. The term license for each software product shall be discontinued on the day immediately preceding the effective date of conversion from a term license to a perpetual license.

d. The price the ordering activity shall pay will be the perpetual license price that prevailed at the time such software was initially ordered under a term license, or the perpetual license price prevailing at the time of conversion from a term license to a perpetual license, whichever is the less, minus an amount equal to % of all term license payments during the period that the software was under a term license within the ordering activity.

8. TERM LICENSE CESSATION – NOT APPLICABLE

a. After a software product has been on a continuous term license for a period of , a fully paid-up, non-exclusive, perpetual license for the software product shall automatically accrue to the ordering activity. The period of continuous term license for automatic accrual of a fully paid-up perpetual license does not have to be achieved during a particular fiscal year; it is a written Contractor commitment which continues to be available for software that is initially ordered under this contract, until a fully paid-up perpetual license accrues to the ordering activity. However, should the term license of the software be discontinued before the specified period of the continuous term license has been satisfied, the perpetual license accrual shall be forfeited.

b. The Contractor agrees to provide updates and maintenance service for the software after a perpetual license has accrued, at the prices and terms of Special Item Number l32-34, if the licensee elects to order such services. Title to the software shall remain with the Contractor.

9. e.) Utilization Limitations for Perpetual Licenses – NOT APPLICABLE i.) Software Asset Identification Tags (SWID) (Option 1 Perpetual License)

1.) Option 1 is applicable when the Offeror agrees to include the International Organization for Standardization/International Electrotechnical Commission 19770-2 (ISO/IEC 19770- 2:2015) standard identification tag (SWID Tag) as an embedded element in the software. An ISO/IEC 19970-2 tag is a discoverable identification element in software that provides licensees enhanced asset visibility. Enhance visibility supports both the goals of better software asset management and license compliance. Offerors may use the National Institute of Standards and Technology (NIST) document “NISTIR 8060: Guidelines for Creation of Interoperable Software Identification (SWID) Tags,” December 2015 to determine if they are in compliance with the ISO/IEC 19770-2 standard.

2.) Section 837 of The Federal Information Technology Acquisition Reform Act (FITARA) of 2014, requires GSA to seek agreements with software vendors that enhance government- wide acquisition, shared use, and dissemination of software, as well as compliance with end user license agreements. The Megabyte Act of 2016 requires agencies to inventory software assets and to make informed decisions prior to new software acquisitions. In June of 2016, the Office of Management and Budget issued guidance on software asset management requiring each CFO Act (Public Law 101-576 – 11/15/1990) agency to begin software inventory management (M-16-12). To support these requirements, Offerors may elect to include the terms of Option 1 and/or Option 2, which support software asset management and government-wide reallocation or transferability of perpetually licensed software. ii.)

Reallocation of Perpetual Software (Option 2 Perpetual License) 1.) The purpose of SIN 511210 OPTION 2 is to allow ordering activities to transfer software assets for a pre-negotiated charge to other ordering activities. 2.) When an ordering activity becomes aware that a reusable software asset may be available for transfer, it shall contact the Contractor, identify the software license or licenses in question, and request that these licenses be reallocated or otherwise made available to the new ordering activity.

3.) Contractors shall release the original ordering activity from all future obligations under the original license agreement and shall present the new ordering activity with an equivalent license agreement. When the new ordering activity agrees to the license terms, henceforth any subsequent infringement or breach of licensing obligations by the new ordering activity shall be a matter exclusively between the new ordering activity and the Contractor.

4.) The original ordering activity shall de-install, and/or make unusable all of the software assets that are to be transferred. It shall have no continuing right to use the software and any usage shall be considered a breach of the Contractor’s intellectual property and a matter of dispute between the original ordering activity/original license grantee and the licensor.

5.) As a matter of convenience, once the original licenses are deactivated, di-installed, or made otherwise unusable by the original ordering activity or license grantee, the Contractor may elect to issue new licenses to the new ordering activity to replace the old licenses. When new licenses are not issued, the Contractor shall provide technical advice on how best to achieve the functional transfer of the software assets.

6.) Software assets that are eligible for transfer that have lapsed Software Maintenance Services (SIN 54151) may require a maintenance reinstatement fee, chargeable to the new ordering activity or license grantee. When such a fee is paid, the new ordering activity shall receive all the rights and benefits of Software Maintenance Services.

7.) When software assets are eligible for transfer, and are fully covered under pre-paid Software Maintenance Services (SIN 54151), the new ordering activity shall not be required to pay maintenance for those license assets prior to the natural termination of the paid for maintenance period. The rights associated with paid for current Software Maintenance Services shall automatically transfer with the software licenses without fee. When the maintenance period expires, the new ordering activity or license grantee shall have the option to renew maintenance.

8.) The administrative fee to support the transfer of licenses, exclusive of any new incremental licensing or maintenance costs shall be ______ percentage (%) of the original license fee. The fee shall be paid only at the time of transfer. In applying the transfer fee, the Software Contractor shall provide transactional data that supports the original costs of the licenses.

9.) Fill-in data and specific terms shall be attached to the GSA Price List (I-FSS-600 CONTRACT PRICE LISTS (OCT 2016). f.) Software Conversions: Full monetary credit will be allowed to the ordering activity when conversion from one version of the software to another is made as a result of a change in operating system, or from one computer system to another. Under a perpetual license, the purchase price of the new software shall be reduced by the amount that was paid to purchase the earlier version. Under a term license, if conversion credits had accrued while the earlier version was under a term license, those credits shall carry forward and remain available as conversion credits which may be applied towards the perpetual license price of the new version.

TERMS AND CONDITIONS APPLICABLE TO

INFORMATION TECHNOLOGY (IT) PROFESSIONAL

SERVICES

(SPECIAL ITEM NUMBER 54151S)

1. SCOPE

a. The prices, terms and conditions stated under Special Item Number 54151S Information Technology Professional Services apply exclusively to IT Services within the scope of this Information Technology Schedule.

b. The Contractor shall provide services at the Contractor’s facility and/or at the Government location, as agreed to by the Contractor and the ordering office.

2. PERFORMANCE INCENTIVES

a. Performance incentives may be agreed upon between the Contractor and the ordering office on individual fixed price orders or Blanket Purchase Agreements, for fixed price tasks, under this contract in accordance with this clause.

b. The ordering office must establish a maximum performance incentive price for these services and/or total solutions on individual orders or Blanket Purchase Agreements.

c. To the maximum extent practicable, ordering offices shall consider establishing incentives where performance is critical to the agency’s mission and incentives are likely to motivate the contractor. Incentives shall be based on objectively measurable tasks.

3. ORDER

a. Agencies may use written orders, EDI orders, blanket purchase agreements, individual purchase orders, or task orders for ordering services under this contract.

Blanket Purchase Agreements shall not extend beyond the end of the contract period; all services and delivery shall be made and the contract terms and conditions shall continue in effect until the completion of the order. Orders for tasks which extend beyond the fiscal year for which funds are available shall include FAR 52.232-19 (Deviation – May 2003) Availability of Funds for the

Next Fiscal Year. The purchase order shall specify the availability of funds and the period for which funds are available.

b. All task orders are subject to the terms and conditions of the contract. In the event of conflict between a task order and the contract, the contract will take precedence.

4. PERFORMANCE OF SERVICES

a. The Contractor shall commence performance of services on the date agreed to by the Contractor and the ordering office.

b. The Contractor agrees to render services only during normal working hours, unless otherwise agreed to by the Contractor and the ordering office.

c. The Agency should include the criteria for satisfactory completion for each task in the Statement of Work or Delivery Order. Services shall be completed in a good and workmanlike manner.

d. Any Contractor travel required in the performance of IT Services must comply with the Federal Travel Regulation or Joint Travel Regulations, as applicable, in effect on the date(s) the travel is performed. Established Federal Government per diem rates will apply to all Contractor travel. Contractors cannot use GSA city pair contracts.

5. STOP-WORK ORDER (FAR 52.242-15) (AUG 1989)

a. The Contracting Officer may, at any time, by written order to the Contractor, require the Contractor to stop all, or any part, of the work called for by this contract for a period of 90 days after the order is delivered to the Contractor, and for any further period to which the parties may agree. The order shall be specifically identified as a stop-work order issued under this clause. Upon receipt of the order, the Contractor shall immediately comply with its terms and take all reasonable steps to minimize the incurrence of costs allocable to the work covered by the order during the period of work stoppage. Within a period of 90 days after a stop-work is delivered to the Contractor, or within any extension of that period to which the parties shall have agreed, the Contracting Officer shall either-

(1) Cancel the stop-work order; or

(2) Terminate the work covered by the order as provided in the Default, or the Termination for Convenience of the Government, clause of this contract.

b. If a stop-work order issued under this clause is canceled or the period of the order or any extension thereof expires, the Contractor shall resume work. The Contracting Officer shall make an equitable adjustment in the delivery schedule or contract price, or both, and the contract shall be modified, in writing, accordingly, if-

(3) The stop-work order results in an increase in the time required for, or in the Contractor's cost properly allocable to, the performance of any part of this contract;

and

(4) The Contractor asserts its right to the adjustment within 30 days after the end of the period of work stoppage; provided, that, if the Contracting Officer decides the facts justify the action, the Contracting Officer may receive and act upon the claim submitted at any time before final payment under this contract.

c. If a stop-work order is not canceled and the work covered by the order is terminated for the convenience of the Government, the Contracting Officer shall allow reasonable costs resulting from the stop-work order in arriving at the termination settlement.

d. If a stop-work order is not canceled and the work covered by the order is terminated for default, the Contracting Officer shall allow, by equitable adjustment or otherwise, reasonable costs resulting from the stop-work order.

6. INSPECTION OF SERVICES

The Inspection of Services–Fixed Price (AUG 1996) (Deviation 1 – May 2003) clause at FAR 52.246-4 applies to firm-fixed price orders placed under this contract. The Inspection–Time-and-Materials and Labor-Hour (May 2001) (Deviation 1 – May 2003) clause at FAR 52.246-6 applies to time-and-materials and labor-hour orders placed under this contract.

7. RESPONSIBILITIES OF THE CONTRACTOR

The Contractor shall comply with all laws, ordinances, and regulations (Federal, State, City, or otherwise) covering work of this character. If the end product of a task order is software, then FAR 52.227-14 (Deviation – Dec 2007) Rights in Data – General, may apply.

8. RESPONSIBILITIES OF ORDERING ACTIVITY

Subject to security regulations, the ordering activity shall permit Contractor access to all facilities necessary to perform the requisite IT/IAM Professional Services.

9. INDEPENDENT CONTRACTOR

All IT Services performed by the Contractor under the terms of this contract shall be as an independent Contractor, and not as an agent or employee of the Government.

10. ORGANIZATIONAL CONFLICTS OF INTEREST

a. Definitions.

“Contractor” means the person, firm, unincorporated association, joint venture, partnership, or corporation that is a party to this contract.

“Contractor and its affiliates” and “Contractor or its affiliates” refers to the Contractor, its chief executives, directors, officers, subsidiaries, affiliates, subcontractors at any tier, and consultants and any joint venture involving the Contractor, any entity into or with which the Contractor subsequently merges or affiliates, or any other successor or assignee of the Contractor.

An “Organizational conflict of interest” exists when the nature of the work to be performed under a proposed Government contract, without some restriction on activities by the Contractor and its affiliates, may either (i) result in an unfair competitive advantage to the Contractor or its affiliates or (ii) impair the Contractor’s or its affiliates’ objectivity in performing contract work.

b. To avoid an organizational or financial conflict of interest and to avoid prejudicing the best interests of the Government, ordering offices may place restrictions on the Contractors, its affiliates, chief executives, directors, subsidiaries and subcontractors at any tier when placing orders against schedule contracts. Such restrictions shall be consistent with FAR 9.505 and shall be designed to avoid, neutralize, or mitigate organizational conflicts of interest that might otherwise exist in situations related to individual orders placed against the schedule contract. Examples of situations, which may require restrictions, are provided at FAR 9.508.

11. INVOICES

The Contractor, upon completion of the work ordered, shall submit invoices for IT services. Progress payments may be authorized by the ordering office on individual orders, if appropriate. Progress payments shall be based upon completion of defined milestones or interim products. Invoices shall be submitted monthly for recurring services performed during the preceding month.

12. PAYMENTS

For firm-fixed price orders the ordering activity shall pay the Contractor, upon submission of proper invoices or vouchers, the prices stipulated in this contract for service rendered and accepted. Progress payments shall be made only when authorized by the order. For time-and-materials orders, the Payments under Time-and-Materials and Labor-Hour Contracts at FAR 52.212-4 (OCT 2008) (ALTERNATE I – OCT 2008) (DEVIATION I – FEB 2007) applies to time-and-materials orders placed under this contract. For labor-hour orders, the Payment under Time-and-Materials and Labor-Hour Contracts at FAR 52.212-4 (OCT 2008) (ALTERNATE I – OCT 2008) (DEVIATION I

– FEB 2007) applies to labor-hour orders placed under this contract. 52.216-31(Feb 2007) Time-and-Materials/Labor-Hour Proposal Requirements—Commercial Item Acquisition As prescribed in 16.601(e)(3), insert the following provision:

a. The Government contemplates award of a Time-and-Materials or Labor-Hour type of contract resulting from this solicitation.

b. The offeror must specify fixed hourly rates in its offer that include wages, overhead, general and administrative expenses, and profit. The offeror must specify whether the fixed hourly rate for each labor category applies to labor performed by—

(5) The offeror;

(6) Subcontractors; and/or

(7) Divisions, subsidiaries, or affiliates of the offeror under a common control.

13. RESUMES

Resumes shall be provided to the GSA Contracting Officer or the user agency upon request.

14. INCIDENTAL SUPPORT COSTS

Incidental support costs are available outside the scope of this contract. The costs will be negotiated separately with the ordering agency in accordance with the guidelines set forth in the FAR.

15. APPROVAL OF SUBCONTRACTS

The ordering activity may require that the Contractor receive, from the ordering activity's Contracting Officer, written consent before placing any subcontract for furnishing any of the work called for in a task order.

16. DESCRIPTION OF IT SERVICES AND PRICING

a. The Contractor shall provide a description of each type of IT/IAM Service offered under Special Item Numbers 54151S IT/IAM Professional Services should be presented in the same manner as the Contractor sells to its commercial and other ordering activity customers. If the Contractor is proposing hourly rates, a description of all corresponding commercial job titles (labor categories) for those individuals who will perform the service should be provided.

b. Pricing for all IT/IAM Professional Services shall be in accordance with the Contractor’s customary commercial practices; e.g., hourly rates, monthly rates, term rates, and/or fixed prices.

The following is an example of the manner in which the description of a commercial job title should be presented:

EXAMPLE: Commercial Job Title: System Engineer Minimum/General Experience: Three (3) years of technical experience which applies to systems analysis and design techniques for complex computer systems. Requires competence in all phases of systems analysis techniques, concepts and methods; also requires knowledge of available hardware, system software, input/output devices, structure and management practices.

Functional Responsibility: Guides users in formulating requirements, advises alternative approaches, conducts feasibility studies.

Minimum Education: Bachelor’s Degree in Computer Science

TERMS AND CONDITIONS APPLICABLE TO HEALTH

INFORMATION TECHNOLOGY SERVICES (SPECIAL

ITEM NUMBER 54151H)

1. SCOPE

a. The prices, terms and conditions stated under Special Item Number Special Item Number 54151H Health Information Technology Services apply exclusively to Health IT Services within the scope of this Information Technology Schedule.

b. The Contractor shall provide services at the Contractor’s facility and/or at the ordering activity location, as agreed to by the Contractor and the ordering activity.

2. PERFORMANCE INCENTIVES I-FSS-60 Performance Incentives (April 2000)

a. Performance incentives may be agreed upon between the Contractor and the ordering activity on individual fixed price orders or Blanket Purchase Agreements under this contract.

b. The ordering activity must establish a maximum performance incentive price for these services and/or total solutions on individual orders or Blanket Purchase Agreements.

c. Incentives should be designed to relate results achieved by the contractor to specified targets. To the maximum extent practicable, ordering activities shall consider establishing incentives where performance is critical to the ordering activity’s mission and incentives are likely to motivate the contractor. Incentives shall be based on objectively measurable tasks.

3. ORDER

a. Agencies may use written orders, EDI orders, blanket purchase agreements, individual purchase orders, or task orders for ordering services under this contract.

Blanket Purchase Agreements shall not extend beyond the end of the contract period; all services and delivery shall be made and the contract terms and conditions shall continue in effect until the completion of the order. Orders for tasks which extend beyond the fiscal year for which funds are available shall include FAR 52.232-19 (Deviation – May 2003) Availability of Funds for the Next Fiscal Year.

The purchase order shall specify the availability of funds and the period for which funds are available.

b. All task orders are subject to the terms and conditions of the contract. In the event of conflict between a task order and the contract, the contract will take precedence.

4. PERFORMANCE OF SERVICES

a. The Contractor shall commence performance of services on the date agreed to by the Contractor and the ordering activity.

b. The Contractor agrees to render services only during normal working hours, unless otherwise agreed to by the Contractor and the ordering activity.

c. The ordering activity…