MAS - Applied Technical Systems, Inc. - GS35F0535W

GSA Multiple Award Schedule IT Professional Services SIN 54151S

Effective:

March 30, 2020

GSA Price List for:

MAS Solicitation Number: 47QSMD20R0001 Refresh: 0005

Mass Modification A812, signed February 21, 2020

Prepared for:

US General Services Administration

Prepared by:

Ms. Felicia Hudlow Applied Technical Systems, Inc. (ATS) 9307 Bayshore Drive NW, Suite 301 Silverdale, WA 98383 Phone: 360.989.3349 Fax: 360.989.3387 felicia.hudlow@atsid.com

Cage Code: 2T143 Facility Cage Code: 2T143 DUNS Number: 004821021

The named individual above is authorized to negotiate and sign on behalf of ATS, a CVE certified Service Disabled Veteran Owned Small Business. We agree to comply with all terms, conditions, and provisions included in the solicitation and agree to furnish any or all items upon which prices are offered at the price set opposite each item.

AUTHORIZED FEDERAL SUPPLY SERVICE INFORMATION

IT PROFESSIONAL SERVICES PRICELIST

SIN 54151S – INFORMATION TECHNOLOGY (IT) PROFESSIONAL SERVICES

FPDS Code D301 IT Facility Operation and Maintenance FPDS Code D302 IT Systems Development Services FPDS Code D306 IT Systems Analysis Services FPDS Code D307 Automated Information Systems Design and Integration Services FPDS Code D308 Programming Services FPDS Code D310 IT Backup and Security Services FPDS Code D311 IT Data Conversion Services FPDS Code D313 Computer Aided Design/Computer Aided Manufacturing (CAD/CAM) Services FPDS Code D316 IT Network Management Services FPDS Code D317 Creation/Retrieval of IT Related Automated News Services, Data Services, or

Other Information Services (All other information services belong under Schedule 76)

FPDS Code D399 Other Information Technology Services, Not Elsewhere Classified

Note 1: All non-professional labor categories must be incidental to and used solely to support hardware, software and/or professional services, and cannot be purchased separately.

Note 2: Offerors and Agencies are advised that the Group 70 – Information Technology Schedule is not to be used to procure services which properly fall under the Brooks Act. These services include, but are not limited to, architectural, engineering, mapping, cartographic production, remote sensing, geographic information systems, and related services. FAR 36.6 distinguishes between mapping services of an A/E nature and mapping services which are not connected nor incidental to the traditionally accepted A/E Services.

Note 3: This solicitation is not intended to solicit for the reselling of IT Professional Services, except for the provision of implementation, maintenance, integration, or training services in direct support of a product. Under such circumstances the services must be performance by the publisher or manufacturer or one of their authorized agents.

Applied Technical Systems, Inc.

9307 Bayshore Drive NW, Suite 301 Silverdale, WA 98383

(p) 360.989.3349

(f) 360.989.3387 Website: www.atsid.com

Contract Number: GS-35F-0535W Contract Term: 7/14/2010 – 7/13/2025

Pricelist current from date of award through Modification

#PO-0035

Socio-Economic status: CVE Certified Service Disabled Veteran

Owned Small Business (SDVOSB)

Products and ordering information in this Authorized FSS Information Technology Schedule Pricelist are also available on the GSA Advantage! System (http://www.gsaadvantage.gov).

Table of Contents

1. Information for Ordering Activities

2. Geographic Scope of Contract

3. Contractor's Ordering Address and Payment Information:

4. LIABILITY FOR INJURY OR DAMAGE

5. Statistical Data for Government Ordering Office Completion of Standard Form 279

6. CAGE Code: 2T143

7. Contractor has registered with the Central Contractor Registration Database

8. FOB Destination

9. DELIVERY SCHEDULE

10. Discounts: Prices shown are NET Prices; Basic Discounts have been deducted

11. Trade Agreements Act of 1979, as amended

12. Statement Concerning Availability of Export Packing:

13. Small Requirements:

14. Maximum Order

15. ORDERING PROCEDURES FOR FEDERAL SUPPLY SCHEDULE CONTRACTS

16. FEDERAL INFORMATION TECHNOLOGY/TELECOMMUNICATION STANDARDS REQUIREMENTS

17. FEDERAL INFORMATION PROCESSING STANDARDS PUBLICATIONS (FIPS PUBS)

18. FEDERAL TELECOMMUNICATION STANDARDS (FED-STDS)

19. CONTRACT TASKS / SPECIAL REQUIREMENTS (C-FSS-370) (NOV 2003)

20. CONTRACT ADMINISTRATION FOR ORDERING ACTIVITIES

21. GSA Advantage!

22. PURCHASE OF OPEN MARKET ITEMS

23. CONTRACTOR COMMITMENTS, WARRANTIES AND REPRESENTATIONS

24. OVERSEAS ACTIVITIES

25. BLANKET PURCHASE AGREEMENTS (BPAs)

26. CONTRACTOR TEAM ARRANGEMENTS

27. INSTALLATION, DEINSTALLATION, REINSTALLATION

28. SECTION 508 COMPLIANCE

29. PRIME CONTRACTOR ORDERING FROM FEDERAL SUPPLY SCHEDULES

30. INSURANCE—WORK ON A GOVERNMENT INSTALLATION (JAN 1997)(FAR 52.228-5)

31. SOFTWARE INTEROPERABILITY

32. ADVANCE PAYMENTS

33. Terms and Conditions Applicable IT Professional Services (SIN 54151S)

34. SCOPE

35. PERFORMANCE INCENTIVES I-FSS-60 Performance Incentives (April 2000)

36. ORDER

37. PERFORMANCE OF SERVICES

38. STOP-WORK ORDER (FAR 52.242-15) (AUG 1989)

39. INSPECTION OF SERVICES

40. RESPONSIBILITIES OF THE CONTRACTOR

41. RESPONSIBILITIES OF THE ORDERING ACTIVITY

42. INDEPENDENT CONTRACTOR

43. ORGANIZATIONAL CONFLICTS OF INTEREST

44. INVOICES

45. PAYMENTS

46. RESUMES

47. INCIDENTAL SUPPORT COSTS

48. APPROVAL OF SUBCONTRACTS

49. DESCRIPTION OF IT/IAM PROFESSIONAL SERVICES AND PRICING

50. PROFESSIONAL SERVICES IT LABOR CATEGORY / POSITION DESCRIPTIONS

51. PROFESSIONAL SERVICES IT LABOR CATEGORY / PRICE LIST (Includes IFF)

52. USA COMMITMENT TO PROMOTE SMALL BUSINESS PARTICIPATION PROCUREMENT PROGRAMS

GSA Price List 03.30.2020 6

1. Information for Ordering Activities SPECIAL NOTICE TO AGENCIES: Small Business Participation: SBA strongly supports the participation of small business concerns in the Federal Supply Schedules Program. To enhance Small Business Participation SBA policy allows agencies to include in their procurement base and goals, the dollar value of orders expected to be placed against the Federal Supply Schedules, and to report accomplishments against these goals.

For orders exceeding the micro purchase threshold, FAR 8.404 requires agencies to consider the catalogs/pricelists of at least three schedule contractors or consider reasonably available information by using the GSA Advantage!™ on-line shopping service (www.fss.gsa.gov). The catalogs/pricelists, GSA Advantage!™ and the Federal Supply Service Home Page (www.fss.gsa.gov) contains information on a broad array of products and services offered by small business concerns.

This information should be used as a tool to assist ordering activities in meeting or exceeding established small business goals. It should also be used as a tool to assist in including small, small disadvantaged, and women-owned small businesses among those considered when selecting pricelists for a best value determination.

For orders exceeding the micro purchase threshold, customers are to give preference to small business concerns when two or more items at the same delivered price will satisfy their requirement.

2. Geographic Scope of Contract:

The geographic scope of this contract is the 48 contiguous states, Alaska, Hawaii, Puerto Rico, Washington DC and U.S. Territories and overseas.

3. Contractor's Ordering Address and Payment Information:

Ordering Information:

Attn: Ms. Felicia Hudlow 9307 Bayshore Drive NW, Suite 301 Silverdale, WA 98383 Phone: 360.989.3370 felicia.hudlow@atsid.com

Applied Technical Systems, Inc. (ATS) Payment Address:

Attn: Erica Krueger 9307 Bayshore Drive NW, Suite 301 Silverdale, WA 98383 Phone: 360.989.3349 billing@atsid.com

GSA Price List 03.30.2020 7

Contractors are required to accept credit cards for payments equal to or less than the micro-purchase threshold for oral or written delivery orders. Credit cards will be acceptable for payment above the micro purchase threshold. In addition, bank account information for wire transfer payments will be shown on the invoice.

The following telephone number(s) can be used by ordering activities to obtain technical and/or ordering assistance: TELEPHONE: 360.989.3349 FAX: 360.989.3387

4. LIABILITY FOR INJURY OR DAMAGE

The Contractor shall not be liable for any injury to ordering activity personnel or damage to order activity property arising from the use of equipment maintained by the Contractor, unless such injury or damage is due to the fault or negligence of the Contractor.

5. Statistical Data for Government Ordering Office Completion of Standard Form 279

• Block 9: G. Order/Modification under Federal Schedule

• Block 16: Data Universal Numbering System (DUNS) Number: 00-482-1021

• Block 30: Type of Contractor – B

• Block 31: Woman-Owned Small Business – No

• Block 36: Contractor’s Taxpayer Identification Number (TIN): 91-1098556

• Block 40: Veteran Owned Small Business (VOSB) – A (Service Disabled VOSB)

6. CAGE Code: 2T143

7. Contractor has registered with the Central Contractor Registration Database

8. FOB Destination

9. DELIVERY SCHEDULE

TIME OF DELIVERY: The Contractor shall deliver to destination within the number of calendar days after receipt of order (ARO), as set forth below:

SPECIAL ITEM NUMBER DELIVERY TIME (Days ARO) 54151S As Negotiated for Each Task Order URGENT REQUIREMENTS: When the Federal Supply Schedule contract delivery period does not meet the bona fide urgent delivery requirements of an ordering activity, ordering activities are encouraged, if time permits, to contact the Contractor for the purpose of obtaining accelerated delivery. The Contractor shall reply to the inquiry within 3 workdays after receipt. (Telephonic replies shall be confirmed by the Contractor in writing.) If the Contractor offers an accelerated delivery time acceptable to the ordering activity, any order(s) placed pursuant to the agreed upon accelerated delivery time frame shall be delivered within this shorter delivery time and in accordance with all other terms and conditions of the contract.

GSA Price List 03.30.2020 8

10. Discounts: Prices shown are NET Prices; Basic Discounts have been deducted.

a. Prompt Payment: 0% Net 30

b. Quantity: The price for any labor category may be negotiated at the time of order depending on the quantity, duration, and location of service.

c. Dollar Volume: 0% on all orders.

d. Government Educational Institutions: Same discounts as all other Government customers.

e. Other: None

11. Trade Agreements Act of 1979, as amended:

All items are U.S. made end products, designated country end products, Caribbean Basin country end products, Canadian end products, or Mexican end products as defined in the Trade Agreements Act of 1979, as amended.

12. Statement Concerning Availability of Export Packing:

Not applicable to service offering

13. Small Requirements:

The minimum dollar value of orders to be issued is $100.

14. Maximum Order The Maximum Order value for the following Special Item Numbers (SINs) is $500,000: Special Item Number 54151S - Information Technology (IT) Professional Services for Orders that exceed the maximum order value, Government Agencies may seek special price discounts in accordance with

FAR 8.404.

15. ORDERING PROCEDURES FOR FEDERAL SUPPLY SCHEDULE CONTRACTS

Ordering activities shall use the ordering procedures of Federal Acquisition Regulation (FAR)

8.405 when placing an order or establishing a BPA for supplies or services. These procedures apply to all schedules.

FAR 8.405-1 Ordering procedures for supplies, and services not requiring a statement of work.

FAR 8.405-2 Ordering procedures for services requiring a statement of work.

16. FEDERAL INFORMATION TECHNOLOGY/TELECOMMUNICATION STANDARDS

REQUIREMENTS:

Ordering activities acquiring products from this Schedule must comply with the provisions of the Federal Standards Program, as appropriate (reference: NIST Federal Standards Index). Inquiries to determine whether specific products listed herein comply with Federal Information Processing Standards (FIPS) or Federal Telecommunication Standards (FED-STDS), which are cited by ordering activities, shall be responded to promptly by the Contractor.

GSA Price List 03.30.2020 9

17. FEDERAL INFORMATION PROCESSING STANDARDS PUBLICATIONS (FIPS PUBS):

Information Technology products under this Schedule that do not conform to Federal Information Processing Standards (FIPS) should not be acquired unless a waiver has been granted in accordance with the applicable "FIPS Publication." Federal Information Processing Standards Publications (FIPS PUBS) are issued by the U.S. Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security Act. Information concerning their availability and applicability should be obtained from the National Technical Information Service (NTIS), 5285 Port Royal Road, Springfield, Virginia 22161. FIPS PUBS include voluntary standards when these are adopted for Federal use. Individual orders for FIPS PUBS should be referred to the NTIS Sales Office, and orders for subscription service should be referred to the NTIS Subscription Officer, both at the above address, or telephone number (703) 487-4650.

18. FEDERAL TELECOMMUNICATION STANDARDS (FED-STDS):

Telecommunication products under this Schedule that do not conform to Federal Telecommunication Standards (FED-STDS) should not be acquired unless a waiver has been granted in accordance with the applicable "FED-STD." Federal Telecommunication Standards are issued by the U.S. Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security Act. Ordering information and information concerning the availability of FED- STDS should be obtained from the GSA, Federal Acquisition Service, Specification Section, 470 East L’Enfant Plaza, Suite 8100, SW, Washington, DC 20407, telephone number (202)619-8925. Please include a self-addressed mailing label when requesting information by mail. Information concerning their applicability can be obtained by writing or calling the U.S.

Department of Commerce, National Institute of Standards and Technology, Gaithersburg, MD 20899, telephone number (301)975-2833.

19. CONTRACT TASKS / SPECIAL REQUIREMENTS (C-FSS-370) (NOV 2003)

Security Clearances: The Contractor may be required to obtain/possess varying levels of security clearances in the performance of orders issued under this contract. All costs associated with obtaining/possessing such security clearances should be factored into the price offered under the Multiple Award Schedule.

Travel: The Contractor may be required to travel in performance of orders issued under this contract. Allowable travel and per diem charges are governed by Pub. L. 99-234 and FAR Part 31 and are reimbursable by the ordering agency or can be priced as a fixed price item on orders placed under the Multiple Award Schedule. Travel in performance of a task order will only be reimbursable to the extent authorized by the ordering agency. The Industrial Funding Fee does NOT apply to travel and per diem charges.

Certifications, Licenses and Accreditations: As a commercial practice, the Contractor may be required to obtain/possess any variety of certifications, licenses and accreditations for specific FSC/service code classifications offered. All costs associated with obtaining/ possessing such certifications, licenses and accreditations should be factored into the price offered under the Multiple Award Schedule program.

GSA Price List 03.30.2020 10

Insurance: As a commercial practice, the Contractor may be required to obtain/possess insurance coverage for specific FSC/service code classifications offered. All costs associated with obtaining/possessing such insurance should be factored into the price offered under the Multiple Award Schedule program.

Personnel: The Contractor may be required to provide key personnel, resumes or skill category descriptions in the performance of orders issued under this contract. Ordering activities may require agency approval of additions or replacements to key personnel.

Organizational Conflicts of Interest: Where there may be an organizational conflict of interest as determined by the ordering agency, the Contractor’s participation in such order may be restricted in accordance with FAR Part 9.5.

Documentation/Standards: The Contractor may be requested to provide products or services in accordance with rules, regulations, OMB orders, standards and documentation as specified by the agency’s order.

Data/Deliverable Requirements: Any required data/deliverables at the ordering level will be as specified or negotiated in the agency’s order.

Government-Furnished Property: As specified by the agency’s order, the Government may provide property, equipment, materials, or resources, as necessary.

Availability of Funds: Many Government agencies’ operating funds are appropriated for a specific fiscal year. Funds may not be presently available for any orders placed under the contract or any option year. The Government’s obligation on orders placed under this contract is contingent upon the availability of appropriated funds from which payment for ordering purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are available to the ordering Contracting Officer.

Overtime: For professional services, the labor rates in the Schedule should not vary by virtue of the Contractor having worked overtime. For services applicable to the Service Contract Act (as identified in the Schedule), the labor rates in the Schedule will vary as governed by labor laws (usually assessed a time and a half of the labor rate).

20. CONTRACT ADMINISTRATION FOR ORDERING ACTIVITIES:

Any ordering activity, with respect to any one or more delivery orders placed by it under this contract, may exercise the same rights of termination as might the GSA Contracting Officer under provisions of FAR 52.212-4, paragraphs (l) Termination for the ordering activity’s convenience, and

(m) Termination for Cause (See 52.212-4)

21. GSA Advantage!

GSA Advantage! is an on-line, interactive electronic information and ordering system that provides on-line access to vendors' schedule prices with ordering information. GSA Advantage! will allow

GSA Price List 03.30.2020 11 the user to perform various searches across all contracts including, but not limited to:

(1) Manufacturer.

(2) Manufacturer's Part Number; and

(3) Product categories.

Agencies can browse GSA Advantage! by accessing the Internet World Wide Web utilizing a browser (ex.: Netscape). The Internet address is http://www.fss.gsa.gov/.

22. PURCHASE OF OPEN MARKET ITEMS

NOTE: Open Market Items are also known as incidental items, noncontract items, non-Schedule items, and items not on a Federal Supply Schedule contract.

For administrative convenience, an ordering activity contracting officer may add items not on the Federal Supply Multiple Award Schedule (MAS) -- referred to as open market items -- to a Federal Supply Schedule blanket purchase agreement (BPA) or an individual task or delivery order, only if-

(1) All applicable acquisition regulations pertaining to the purchase of the items not on the Federal Supply Schedule have been followed (e.g., publicizing (Part 5), competition requirements (Part 6), acquisition of commercial items (Part 12), contracting methods (Parts 13, 14, and 15), and small business programs (Part 19));

(2) The ordering activity contracting officer has determined the price for the items not on the Federal Supply Schedule is fair and reasonable.

(3) The items are clearly labeled on the order as items not on the Federal Supply Schedule;

and,

(4) All clauses applicable to items not on the Federal Supply Schedule are included in the order.

23. CONTRACTOR COMMITMENTS, WARRANTIES AND REPRESENTATIONS

For the purpose of this contract, commitments, warranties, and representations include, in addition to those agreed to for the entire schedule contract:

(1) Time of delivery/installation quotations for individual orders.

(2) Technical representations and/or warranties of products concerning performance, total system performance and/or configuration, physical, design and/or functional characteristics and capabilities of a product/equipment/ service/software package submitted in response to requirements which result in orders under this schedule contract.

(3) Any representations and/or warranties concerning the products made in any literature, description, drawings and/or specifications furnished by the Contractor.

The above is not intended to encompass items not currently covered by the GSA Schedule contract.

24. OVERSEAS ACTIVITIES

The terms and conditions of this contract shall apply to all orders for installation, maintenance, and repair of equipment in areas listed in the pricelist outside the 48 contiguous states and the District of Columbia, except as indicated below:

Applied Technical Systems, Inc. (ATS) will consider providing services at U.S. Military Installations

GSA Price List 03.30.2020 12

Overseas, when required and as negotiated with the Government customer.

Upon request of the Contractor, the ordering activity may provide the Contractor with logistics support, as available, in accordance with all applicable ordering activity regulations. Such ordering activity support will be provided on a reimbursable basis and will only be provided to the Contractor's technical personnel whose services are exclusively required for the fulfillment of the terms and conditions of this contract.

25. BLANKET PURCHASE AGREEMENTS (BPAs) The use of BPAs under any schedule contract to fill repetitive needs for supplies or services is allowable. BPAs may be established with one or more schedule contractors. The number of BPAs to be established is within the discretion of the ordering activity establishing the BPA and should be based on a strategy that is expected to maximize the effectiveness of the BPA(s). Ordering activities shall follow FAR 8.405-3 when creating and implementing BPA(s).

26. CONTRACTOR TEAM ARRANGEMENTS

Contractors participating in contractor team arrangements must abide by all terms and conditions of their respective contracts. This includes compliance with Clauses 552.238-74, Industrial Funding Fee and Sales Reporting, i.e., each contractor (team member) must report sales and remit the IFF for all products and services provided under its individual contract.

27. INSTALLATION, DEINSTALLATION, REINSTALLATION

The Davis-Bacon Act (40 U.S.C. 276a-276a-7) provides that contracts in excess of $2,000 to which the United States or the District of Columbia is a party for construction, alteration, or repair (including painting and decorating) of public buildings or public works with the United States, shall contain a clause that no laborer or mechanic employed directly upon the site of the work shall receive less than the prevailing wage rates as determined by the Secretary of Labor. The requirements of the Davis-Bacon Act do not apply if the construction work is incidental to the furnishing of supplies, equipment, or services. For example, the requirements do not apply to simple installation or alteration of a public building or public work that is incidental to furnishing supplies or equipment under a supply contract. However, if the construction, alteration, or repair is segregable and exceeds $2,000, then the requirements of the Davis- Bacon Act applies.

The ordering activity issuing the task order against this contract will be responsible for proper administration and enforcement of the Federal labor standards covered by the Davis-Bacon Act.

The proper Davis-Bacon wage determination will be issued by the ordering activity at the time a request for quotations is made for applicable construction classified installation, deinstallation, and reinstallation services under SIN 132-8 or 132-9.

28. SECTION 508 COMPLIANCE.

If applicable, Section 508 compliance information on the supplies and services in this contract are available in Electronic and Information Technology (EIT) at the following:

The EIT standard can be found at: www.Section508.gov/.

GSA Price List 03.30.2020 13

29. PRIME CONTRACTOR ORDERING FROM FEDERAL SUPPLY SCHEDULES.

Prime Contractors (on cost reimbursement contracts) placing orders under Federal Supply Schedules, on behalf of an ordering activity, shall follow the terms of the applicable schedule and authorization and include with each order –

(a) A copy of the authorization from the ordering activity with whom the contractor has the prime contract (unless a copy was previously furnished to the Federal Supply Schedule contractor);

and

(b) The following statement:

This order is placed under written authorization from dated . In the event of any inconsistency between the terms and conditions of this order and those of your Federal Supply Schedule contract, the latter will govern.

30. INSURANCE—WORK ON A GOVERNMENT INSTALLATION (JAN 1997)(FAR 52.228-5)

The Contractor shall, at its own expense, provide and maintain during the entire performance of this contract, at least the kinds and minimum amounts of insurance required in the Schedule or elsewhere in the contract.

Before commencing work under this contract, the Contractor shall notify the Contracting Officer in writing that the required insurance has been obtained. The policies evidencing required insurance shall contain an endorsement to the effect that any cancellation or any material change adversely affecting the Government's interest shall not be effective—

For such period as the laws of the State in which this contract is to be performed prescribe;

or Until 30 days after the insurer or the Contractor gives written notice to the Contracting Officer, whichever period is longer.

The Contractor shall insert the substance of this clause, including this paragraph (c), in subcontracts under this contract that require work on a Government installation and shall require subcontractors to provide and maintain the insurance required in the Schedule or elsewhere in the contract. The Contractor shall maintain a copy of all subcontractors' proofs of required insurance and shall make copies available to the Contracting Officer upon request.

31. SOFTWARE INTEROPERABILITY.

Offerors are encouraged to identify within their software items any component interfaces that support open standard interoperability. An item’s interface may be identified as interoperable based on participation in a Government agency-sponsored program or in an independent organization program. Interfaces may be identified by reference to an interface registered in the component registry located at http://www.core.gov.

32. ADVANCE PAYMENTS

A payment under this contract to provide a service or deliver an article for the United States Government may not be more than the value of the service already provided or the article already

GSA Price List 03.30.2020 14 delivered. Advance or pre-payment is not authorized or allowed under this contract (31U.S.C.

3324).

33. Terms and Conditions Applicable IT Professional Services (SIN 54151S)

34. SCOPE

The prices, terms and conditions stated under Special Item Number 54151S Information Technology Professional Services apply exclusively to IT Professional Services within the scope of this Information Technology Schedule.

The Contractor shall provide services at the Contractor’s facility and/or at the ordering activity location, as agreed to by the Contractor and the ordering activity.

35. PERFORMANCE INCENTIVES I-FSS-60 Performance Incentives (April 2000) Performance incentives may be agreed upon between the Contractor and the ordering activity on individual fixed price orders or Blanket Purchase Agreements under this contract.

The ordering activity must establish a maximum performance incentive price for these services and/or total solutions on individual orders or Blanket Purchase Agreements.

Incentives should be designed to relate results achieved by the contractor to specified targets. To the maximum extent practicable, ordering activities shall consider establishing incentives where performance is critical to the ordering activity’s mission and incentives are likely to motivate the contractor. Incentives shall be based on objectively measurable tasks.

36. ORDER

Agencies may use written orders, EDI orders, blanket purchase agreements, individual purchase orders, or task orders for ordering services under this contract. Blanket Purchase Agreements shall not extend beyond the end of the contract period; all services and delivery shall be made, and the contract terms and conditions shall continue in effect until the completion of the order. Orders for tasks which extend beyond the fiscal year for which funds are available shall include FAR 52.232-19 (Deviation – May 2003) Availability of Funds for the Next Fiscal Year. The purchase order shall specify the availability of funds and the period for which funds are available.

All task orders are subject to the terms and conditions of the contract. In the event of conflict between a task order and the contract, the contract will take precedence.

37. PERFORMANCE OF SERVICES

The Contractor shall commence performance of services on the date agreed to by the Contractor and the ordering activity.

The Contractor agrees to render services only during normal working hours, unless otherwise agreed to by the Contractor and the ordering activity.

GSA Price List 03.30.2020 15

The ordering activity should include the criteria for satisfactory completion for each task in the Statement of Work or Delivery Order. Services shall be completed in a good and workmanlike manner.

Any Contractor travel required in the performance of IT/IAM Services must comply with the Federal Travel Regulation or Joint Travel Regulations, as applicable, in effect on the date(s) the travel is performed. Established Federal Government per diem rates will apply to all Contractor travel. Contractors cannot use GSA city pair contracts.

38. STOP-WORK ORDER (FAR 52.242-15) (AUG 1989)

The Contracting Officer may, at any time, by written order to the Contractor, require the Contractor to stop all, or any part, of the work called for by this contract for a period of 90 days after the order is delivered to the Contractor, and for any further period to which the parties may agree. The order shall be specifically identified as a stop-work order issued under this clause.

Upon receipt of the order, the Contractor shall immediately comply with its terms and take all reasonable steps to minimize the incurrence of costs allocable to the work covered by the order during the period of work stoppage. Within a period of 90 days after a stop-work is delivered to the Contractor, or within any extension of that period to which the parties shall have agreed, the Contracting Officer shall either-

Cancel the stop-work order; or terminate the work covered by the order as provided in the Default, or the Termination for Convenience of the Government, clause of this contract.

If a stop-work order issued under this clause is canceled or the period of the order or any extension thereof expires, the Contractor shall resume work. The Contracting Officer shall make an equitable adjustment in the delivery schedule or contract price, or both, and the contract shall be modified, in writing, accordingly.

If the stop-work order results in an increase in the time required for, or in the Contractor's cost properly allocable to, the performance of any part of this contract; and the Contractor asserts its right to the adjustment within 30 days after the end of the period of work stoppage; provided that, if the Contracting Officer decides the facts justify the action, the Contracting Officer may receive and act upon the claim submitted at any time before final payment under this contract.

If a stop-work order is not canceled and the work covered by the order is terminated for the convenience of the Government, the Contracting Officer shall allow reasonable costs resulting from the stop-work order in arriving at the termination settlement.

If a stop-work order is not canceled and the work covered by the order is terminated for default, the Contracting Officer shall allow, by equitable adjustment or otherwise, reasonable costs resulting from the stop-work order.

GSA Price List 03.30.2020 16

39. INSPECTION OF SERVICES

The Inspection of Services–Fixed Price (AUG 1996) (Deviation 1 – May 2003) clause at FAR 52.246- 4 applies to firm-fixed price orders placed under this contract. The Inspection– Time-and-Materials and Labor-Hour (May 2001) (Deviation 1 – May 2003) clause at FAR 52.246- 6 applies to time-and-materials and labor-hour orders placed under this contract.

40. RESPONSIBILITIES OF THE CONTRACTOR

The Contractor shall comply with all laws, ordinances, and regulations (Federal, State, City, or otherwise) covering work of this character. If the product of a task order is software, then FAR 52.227-14 (Deviation – Dec 2007) Rights in Data – General, may apply.

41. RESPONSIBILITIES OF THE ORDERING ACTIVITY

Subject to security regulations, the ordering activity shall permit Contractor access to all facilities necessary to perform the requisite IT/IAM Professional Services.

42. INDEPENDENT CONTRACTOR

All IT/IAM Professional Services performed by the Contractor under the terms of this contract shall be as an independent Contractor, and not as an agent or employee of the ordering activity.

43. ORGANIZATIONAL CONFLICTS OF INTEREST

Definitions.

“Contractor” means the person, firm, unincorporated association, joint venture, partnership, or corporation that is a party to this contract. “Contractor and its affiliates” and “Contractor or its affiliates” refers to the Contractor, its chief executives, directors, officers, subsidiaries, affiliates, subcontractors at any tier, and consultants and any joint venture involving the Contractor, any entity into or with which the Contractor subsequently merges or affiliates, or any other successor or assignee of the Contractor. An “Organizational conflict of interest” exists when the nature of the work to be performed under a proposed ordering activity contract, without some restriction on ordering activities by the Contractor and its affiliates, may either (i) result in an unfair competitive advantage to the Contractor or its affiliates or (ii) impair the Contractor’s or its affiliates’ objectivity in performing contract work.

To avoid an organizational or financial conflict of interest and to avoid prejudicing the best interests of the ordering activity, ordering activities may place restrictions on the Contractors, its affiliates, chief executives, directors, subsidiaries and subcontractors at any tier when placing orders against schedule contracts. Such restrictions shall be consistent with FAR 9.505 and shall be designed to avoid, neutralize, or mitigate organizational conflicts of interest that might otherwise exist in situations related to individual orders placed against the schedule contract. Examples of situations, which may require restrictions, are provided at FAR 9.508.

44. INVOICES

The Contractor, upon completion of the work ordered, shall submit invoices for IT/IAM

GSA Price List 03.30.2020 17

Professional Services. Progress payments may be authorized by the ordering activity on individual orders if appropriate. Progress payments shall be based upon completion of defined milestones or interim products. Invoices shall be submitted monthly for recurring services performed during the preceding month.

45. PAYMENTS

For firm-fixed price orders the ordering activity shall pay the Contractor, upon submission of proper invoices or vouchers, the prices stipulated in this contract for service rendered and accepted. Progress payments shall be made only when authorized by the order. For time-and-materials orders, the Payments under Time-and-Materials and Labor-Hour Contracts at FAR 52.212-4 (OCT 2008) (ALTERNATE I – OCT 2008) (DEVIATION I – FEB 2007) applies to time-and-materials orders placed under this contract. For labor-hour orders, the Payment under Time-and- Materials and Labor-Hour Contracts at FAR 52.212-4 (OCT 2008) (ALTERNATE I – OCT 2008) (DEVIATION I – FEB 2007) applies to labor-hour orders placed under this contract. 52.216-31 (Feb 2007) Time-and-Materials/Labor-Hour Proposal Requirements—Commercial Item Acquisition As prescribed in 16.601(e)(3), insert the following provision:

The Government contemplates award of a Time-and-Materials or Labor-Hour type of contract resulting from this solicitation.

The offeror must specify fixed hourly rates in its offer that include wages, overhead, general, and administrative expenses, and profit. The offeror must specify whether the fixed hourly rate for each labor category applies to labor performed by—

• The offeror.

• Subcontractors; and/or

• Divisions, subsidiaries, or affiliates of the offeror under a common control.

46. RESUMES

Resumes shall be provided to the GSA Contracting Officer or the user ordering activity upon request.

47. INCIDENTAL SUPPORT COSTS

Incidental support costs are available outside the scope of this contract. The costs will be negotiated separately with the ordering activity in accordance with the guidelines set forth in the FAR.

48. APPROVAL OF SUBCONTRACTS

The ordering activity may require that the Contractor receive, from the ordering activity's Contracting Officer, written consent before placing any subcontract for furnishing any of the work called for in a task order.

49. DESCRIPTION OF IT/IAM PROFESSIONAL SERVICES AND PRICING

The Contractor shall provide a description of each type of IT/IAM Service offered under Special Item Numbers 54151S IT/IAM Professional Services should be presented in the same manner as the Contractor sells to its commercial and other ordering activity customers. If the Contractor is

GSA Price List 03.30.2020 18 proposing hourly rates, a description of all corresponding commercial job titles (labor categories) for those individuals who will perform the service should be provided.

Pricing for all IT/IAM Professional Services shall be in accordance with the Contractor’s customary commercial practices, e.g., hourly rates, monthly rates, term rates, and/or fixed prices.

50. IT PROFESSIONAL SERVICES LABOR CATEGORY / POSITION DESCRIPTIONS

Business Analyst Principal Duties and Responsibilities:

Provide Project Management support to include project scope, cost control, schedule, resource leveling, project phase management, risk milestone tracking, and deliverables. Assist with data collection and development of proposals, project plans, business case analysis, and other written material and documentation. Conduct research and exploration and be able to present findings and provide recommendations related to new concepts and/or new department efforts or initiatives. Conduct analysis of data, processes and concept papers and provide solutions via report or presentation. Produce high quality and timely business analysis deliverables. Bachelor’s degree in business, accounting, finance, or information systems Effectively elicit and analyze requirements to ensure true business goals and objectives are met.

Job Specifications:

Bachelor’s degree in business, accounting, finance, or information systems, with a minimum of 3-5 years’ experience in business processes and solutions. Solid ability to communicate clearly and concisely, both orally and in writing. Demonstrate ability to balance multiple priorities. Must have excellent communication skills. Strong Microsoft Suite knowledge.

Data Modeler, Senior Principal Duties and Responsibilities:

Well versed in database architecture, systems analytics, and extract / transform / load (ETL) development methodologies. Collect customer data needs, identify data sources, and coordinate with source systems to obtain data, create data models, document metadata, and guide development team through ETL development to make the data available for use within an enterprise.

Job Specifications:

Minimum/General Experience: Five (5) years of experience performing data modeling using industry standard data modeling tools; OR • Bachelor's Degree in Computer Science, Information Systems, Engineering, or other scientific or technical discipline plus three (3) years of relevant experience; OR • Associates Degree in Computer Science, Information Systems, Engineering, or other scientific or technical discipline plus four (4) years of relevant experience. Design and develop logical, physical, and semantic data models, participate in change control, problem management, and communication among associated team members, and participate in process development to ensure a consistent, well-managed, and integrated data infrastructure.

GSA Price List 03.30.2020 19

Database Administrator

Performs database administration and configuration management functions including: Installing and upgrading the DBMS and its associated products, to include applications tools. Allocating system storage and planning future storage requirements for the database system. Creating primary database storage structures: Creating objects once applications developers have designed an application. Modifying the database structure from information given by the application developers. Implementing and maintaining database security. Ensuring compliance with applicable license agreements. Controlling and monitoring user access to the database. Monitoring and optimizing the performance of the database.

Job Specifications:

An associate's degree and 5 years practical experience as a database administrator in Oracle, SQL, Sybase or related database system will be considered equivalent or a high school diploma and related professional training courses and 6 years of experience as a database administrator in Oracle, SQL Server, Sybase, and related database system will be considered equivalent.

Database Subject Matter Expert III

Expert at applying database technologies to business problems; leveraging and enhancing current processes with new capabilities. Design, manage, and utilize high performance relational or object-oriented databases to solve customer requirements. Perform enterprise database analysis, planning, scheduling, tasking assignment, and monitoring technical implementation of new databases. Exceptional analytical skills and experience with data models, administration, development, warehousing and mining, excellent verbal and written communication skills are essential.

Job Specifications:

Bachelor's Degree in Computer Science, Information Systems, Engineering, or other Scientific or Technical discipline directly related to the labor category plus five (5) years of relevant experience of which three (3) years must be specialized.

Engineer, Senior

Analyzing system software requirements and design specifications, designing the software implementation, translating the architecture and detailed design into computer software using formal specifications, database management systems and other software development environments, analyzing and developing corrective actions, preparing required documentation, enhancing software, provide supervision, training and quality assurance to junior personnel, support program management.

Job Specifications:

Master’s Degree in Computer Science, Information Systems, Engineering, or other Scientific or Technical discipline directly related to the labor category plus eight (8) years relevant experience, GSA Price List 03.30.2020 20

OR Bachelor’s Degree in the above discipline plus ten (10) years’ experience; OR Associates Degree in the above disciplines plus twelve (12) years relevant experience, OR Fourteen (14) years relevant experience.

Interaction Designer

Provide user interface design ideas, create wireframes to illustrate design alternatives, facilitate feedback sessions with users and stakeholders to progressively refine the designs, and work collaboratively with graphic designers and developers throughout the iterative user-centered design process.

Job Specifications:

Minimum/General Experience: Minimum of eight (8) years of education and/or technical experience in creating UI elements flexible enough to be displayed across multiple browsers, screen sizes, platforms, and devices. Have extensive knowledge of computer equipment, scripting languages, frameworks, and ability to satisfy design objectives for product users to instinctively interact with the UI with minimal supervision. Minimum Education/Experience: Bachelor’s Degree in Computer Science, Information Systems, Graphic Design or other scientific or technical discipline directly related to the labor category plus four (4) years relevant experience, OR Associates Degree Computer Science, Information Systems, Graphic Design or other scientific or technical discipline directly related to the labor category plus six (6) years relevant experience, OR Eight (8) years of relevant experience.

Interaction Designer, Senior

Provide user interface design ideas, create wireframes to illustrate design alternatives, facilitate feedback sessions with users and stakeholders to progressively refine the designs, and work collaboratively with graphic designers and developers throughout the iterative user-centered design process. Provide direction and oversight to junior Interaction Designers.

Job Specifications:

Minimum/General Experience: Minimum of ten (10) years of education and/or technical experience in creating UI elements flexible enough to be displayed across multiple browsers, screen sizes, platforms, and devices. Have extensive knowledge of computer equipment, scripting languages, frameworks, and ability to satisfy design objectives for product users to instinctively interact with the UI with minimal supervision. Minimum Education/Experience: Bachelor’s Degree in Computer Science, Information Systems, Graphic Design or other scientific or technical discipline directly related to the labor category + six (6) years relevant experience, OR Associates Degree Computer Science, Information Systems, Graphic Design or other scientific or technical discipline directly related to the labor category + eight (8) years relevant experience, OR Ten (10) years of relevant experience.

GSA Price List 03.30.2020 21

Lead Specialist, Senior

Knowledge of government contract environment; ability to work in groups and teams;

collaborative and participative management style. Must be able to manage personnel and project objectives with minimal supervision. Management of small to medium size project or major tasks within a larger program. Responsible for cost and schedule objectives; project personnel management, customer interface and satisfaction. Responsible for early problem identification, reporting, and resolution. Responsible for project level reports and presentations to senior management on project status.

Job Specifications:

Nine (9) years education and management and supervisory experience. Bachelor’s Degree in Management, Computer Science, Information Systems, Engineering, or other Scientific or Technical discipline directly related to the labor category plus five (5) years relevant experience, OR Associate Degree in the above disciplines plus five (5) years relevant experience, OR Relevant military training and/or three (3) years relevant military experience + an additional six (6) years of relevant military and/or commercial experience, OR Seven (7) years relevant experience.

Program Manager

Management of small to medium size project or major task within a large project/program.

Responsible for cost and schedule objectives; personnel management; customer interface and satisfaction. Responsible for project level reports and presentations to senior management.

Job Specifications:

Bachelor’s Degree in Management, Computer Science, Information Systems, Engineering, or other Scientific or Technical discipline plus five (5) years relevant experience, OR Associate Degree in the above disciplines plus seven (7) years relevant experience, OR Nine (9) years relevant experience.

Program Manager, Senior

Management of medium to large size project or multiple major tasks within a large project/program. Responsible for cost and schedule objectives; personnel management; customer interface and satisfaction. Responsible for project level reports and presentations to senior management. Provide guidance to and experience to subordinate Program Managers and Senior Technical Leads.

Job Specifications:

Master’s Degree in Management, Computer Science, Information Systems, Engineering, or other Scientific or Technical Discipline plus five (5) years of relevant experience, OR Bachelor’s Degree in Management, Computer Science, Information Systems, Engineering, or other Scientific or technical discipline plus seven (7) years relevant experience, OR Associate Degree in the above disciplines plus nine (9) years relevant experience, OR Eleven (11) years relevant experience.

GSA Price List 03.30.2020 22

Programmer I

Translating detailed designs into computer software; testing and debugging computer software;

producing both program level and user level documentation; enhancing software to reduce operating time or improve efficiency; supporting program management and other senior staff as required.

Job Specifications:

Associate degree in Computer Science, Information Systems, Engineering, or other Scientific or Technical discipline directly related to the labor category plus one (1) years relevant experience, OR Three (3) years relevant experience.

Programmer II

Translating detailed designs into computer software; testing and debugging computer software;

producing both program level and user level documentation; enhancing software to reduce operating time or improve efficiency; providing supervision, training and quality assurance to junior personnel; supporting program management and other senior staff as required.

Job Specifications:

Bachelor’s Degree in Computer Science, Information Systems, Engineering, or other Scientific or Technical discipline directly related to the labor category plus two (2) years relevant experience, OR Associate Degree in the above disciplines plus four (4) years relevant experience, OR Six (6) years relevant experience.

Programmer III

Translating…