Federal Supply Schedule GS35F0519J

AUTHORIZED FEDERAL SUPPLY SERVICE

INFORMATION TECHNOLOGY SCHEDULE 70 PRICELIST

GENERAL PURPOSE COMMERCIAL INFORMATION TECHNOLOGY

EQUIPMENT

Special Item No. 132-8/132-8STLOC/132-8ROC Commercial Information Technology Equipment Special Item No. 132-9/132-9STLOC/132-9ROC Used and Refurbished IT Equipment

A&T Marketing, Inc.

DBA A&T Networks

9861 Broken Land Pkwy, Ste 154 Columbia, MD 21046

Telephone No. (410) 312-9900

Fax No. (240) 399-1330 http://www.atnetworks.com gsasales@atnetworks.com

Contract Number: GS-35F-0519J

Period Covered by Contract: 6/15/2009 THRU 3/14/2015

General Services Administration Federal Supply Service

Price list current through Modification # __P00055____, dated ___01/13/2014__.

Products and ordering information in this Authorized FSS INFORMATION TECHNOLOGY Schedule 70 Price list are also available on the GSA Advantage System.

Agencies can browse GSAAdvantage by accessing the Federal Supply Service’s Home Page via the Internet at http://www.gsaadvantage.gov.

http://www.atnetworks.com/

TABLE OF CONTENTS

Information for Ordering Offices

Terms and Conditions Applicable to Purchase of General Purpose Commercial Information Technology Equipment (SIN 132-8 & 132-9)

Blanket Purchase Agreement

Teaming Agreement

Return Policy

Information for Ordering Offices

SPECIAL NOTICE TO AGENCIES:

Small Business Participation

SBA strongly supports the participation of small business concerns in the Federal Supply Schedules Program. To enhance Small Business Participation SBA policy allows agencies to include in their procurement base and goals, the dollar value of orders expected to be placed against the Federal Supply Schedules, and to report accomplishments against these goals.

For orders exceeding the micropurchase threshold, FAR 8.404 requires agencies to consider the catalogs/pricelists of at least three schedule contractors or consider reasonably available information by using the GSA Advantage! On-line shopping service (www.fss.gsa.gov). The catalogs/pricelists, GSA Advantage! and the Federal Supply Service Home Page (www.fss.gsa.gov) contain information on a broad array of products and services offered by small business concerns.

This information should be used as a tool to assist ordering activities in meeting or exceeding established small business goals. It should also be used as a tool to assist in including small, small disadvantaged, and women-owned small businesses among those considered when selecting pricelists for a best value determination.

For orders exceeding the micropurchase threshold, customers are to give preference to small business concerns when two or more items at the same delivered price will satisfy their requirement.

1. Geographic Scope of Contract:

The geographic scope of the contract includes the 48 contiguous states, the District of Columbia. Prices do not include shipping cost to AK, HI & PR.

2. Contractor's Ordering Address and Payment Information:

Ordering Address: Payment Address:

A&T Marketing, Inc. A&T Marketing, Inc.

(DBA A&T Networks) 9861 Broken Land Pkwy, Ste 154 9861 Broken Land Pkwy, Ste 154 Columbia, MD 21046 Columbia, MD 21046 Contractors are required to accept the Government purchase card for payments equal to or less than the micro-purchase threshold for oral or written delivery orders. Government purchase cards will be acceptable for payment above the micro-purchase threshold. In addition, bank account information for wire transfer payments will be shown on the invoice.

The following email address and telephone number (s) can be used by ordering agencies to obtain technical and/or ordering assistance:

gsasales@atnetworks.com, orders@atnetworks.com

Phone: (410) 312-9900 Fax: (240) 399-1330

3. Liability for Injury or Damage

The Contractor shall not be liable for any injury to Government personnel or damage to Government property arising from the use of equipment maintained by the Contractor, unless such injury or damage is due to the fault or negligence of the Contractor.

4. Statistical Data for Government Ordering Office Completion of Standard Form 279:

Block 9: G. Order/Modification Under Federal Schedule

Block 16: Contractor Establishment Code (DUNS): 85-978-2419

Block 30: Type of Contractor - B. Small Business

Block 31: Woman-Owned Small Business - YES

Block 36: Contractor's Taxpayer Identification Number (TIN) – 52-1773897

4a. CAGE Code: 0ZPX2

5. FOB: Destination

6. DELIVERY SCHEDULE

a. TIME OF DELIVERY: The Contractor shall deliver to destination within the number of calendar days after receipt of order (ARO), as set forth below:

SPECIAL ITEM NUMBER DELIVERY TIME (Days ARO)

132-8 15 to 30 days 132-9 15 to 30 days mailto:gsasales@atnetworks.com mailto:orders@atnetworks.com

Special order items, built to order items and backorder items might take longer than normal. Customer is advised to check availability before ordering. Expedited delivery are available by phone, 410-312-9900 opt. 1

b. URGENT REQUIREMENTS: When the Federal Supply Schedule contract delivery period does not meet the bona fide urgent delivery requirements of an ordering agency, agencies are encouraged, if time permits, to contact the Contractor for the purpose of obtaining accelerated delivery. The Contractor shall reply to the inquiry within 3 workdays after receipt. (Telephonic replies shall be confirmed by the Contractor in writing.) If the Contractor offers an accelerated delivery time acceptable to the ordering agency, any order(s) placed pursuant to the agreed upon accelerated delivery time frame shall be delivered within this shorter delivery time and in accordance with all other terms and conditions of the contract.

7. Discounts: Prices shown are NET Prices; Basic Discounts have been deducted.

a. Prompt Payment: 0% - N/A days from receipt of invoice or date of acceptance, whichever is later.

b. Quantity Discounts – None.

c. Dollar Volume Discounts – None.

d. Government Educational Institutions – Same as Schedule pricing.

e. Discount for use of Government Commercial Credit Card – None.

f. Other – None.

8. Trade Agreements Act of 1979, as amended:

All items are U.S. made end products, designated country end products, Caribbean Basin country end products, Canadian end products, or Mexican end products as defined in the Trade Agreements Act of 1979, as amended.

9. Statement Concerning Availability of Export Packing: N/A.

10. Small Requirements: The minimum dollar value of orders to be issued is

$200.00 per order.

11. Maximum Order: (All dollar amounts are exclusive of any discount for prompt payment.)

a. Special Item 132-8 – Purchase of Equipment

The maximum dollar value per order for all purchased equipment will be $500,000.

b. Special Item 132-9 – Purchase of Used/Refurbished Equipment.

The maximum dollar value per order for for all purchased used and refurbished equipment will be $500,000.

12. USE OF FEDERAL SUPPLY SERVICE INFORMATION TECHNOLOGY

SCHEDULE CONTRACTS. In accordance with FAR 8.404:

Orders placed pursuant to a Multiple Award Schedule (MAS), using the procedures in FAR 8.404, are considered to be issued pursuant to full and open competition. Therefore, when placing orders under Federal Supply Schedules, ordering offices need not seek further competition, synopsize the requirement, make a separate determination of fair and reasonable pricing, or consider small business set-asides in accordance with subpart 19.5.

GSA has already determined the prices of items under schedule contracts to be fair and reasonable. By placing an order against a schedule using the procedures outlined below, the ordering office has concluded that the order represents the best value and results in the lowest overall cost alternative (considering price, special features, administrative costs, etc.) to meet the Government’s needs.

a. Orders placed at or below the micro-purchase threshold. Ordering offices can place orders at or below the micro-purchase threshold with any Federal Supply Schedule Contractor.

b. Orders exceeding the micro-purchase threshold but not exceeding the maximum order threshold. Orders should be placed with the Schedule Contractor that can provide the supply or service that represents the best value. Before placing an order, ordering offices should consider reasonably available information about the supply or service offered under MAS contracts by using the “GSA Advantage!” on-line shopping service, or by reviewing the catalogs/pricelists of at least three Schedule Contractors and selecting the delivery and other options available under the schedule that meets the agency’s needs. In selecting the supply or service representing the best value, the ordering office may consider--

(1) Special features of the supplies that are required in effective program performance and that are not provided by a comparable supply;

(2) Trade-in considerations;

(3) Probable life of the item selected as compared with that of a comparable item;

(4) Warranty considerations;

(5) Maintenance availability;

(6) Past performance; and

(7) Environmental and energy efficiency considerations.

c. Orders exceeding the maximum order threshold. Each schedule contract has an established maximum order threshold. This threshold represents the point where it is advantageous for the ordering office to seek a price reduction. In addition to following the procedures in paragraph b, above, and before placing an order that exceeds the maximum order threshold, ordering offices shall--

(1) Review additional Schedule Contractors’ catalogs/pricelists or use the “GSA Advantage!” on-line shopping service;

(2) Based upon the initial evaluation, generally seek price reductions from the Schedule Contractor(s) appearing to provide the best value (considering price and other factors); and

(3) After price reductions have been sought, place the order with the Schedule Contractor that provides the best value and results in the lowest overall cost alternative. If further price reductions are not offered, an order may still be placed, if the ordering office determines that it is appropriate.

NOTE: For orders exceeding the maximum order threshold, the Contractor may:

(1) Offer a new lower price for this requirement (the Price Reductions clause is not applicable to orders placed over the maximum order in FAR 52.216-19 Order Limitations);

(2) Offer the lowest price available under the contract; or

(3) Decline the order (orders must be returned in accordance with FAR 52.216-19).

d. Blanket purchase agreements (BPAs). The establishment of Federal Supply Schedule BPAs is permitted when following the ordering procedures in FAR

8.404. All schedule contracts contain BPA provisions. Ordering offices may use BPAs to establish accounts with Contractors to fill recurring requirements. BPAs should address the frequency of ordering and invoicing, discounts, and delivery locations and times.

e. Price reductions. In addition to the circumstances outlined in paragraph c, above, there may be instances when ordering offices will find it advantageous to request a price reduction. For example, when the ordering office finds a schedule supply or service elsewhere at a lower price or when a BPA is being established to fill recurring requirements, requesting a price reduction could be advantageous. The potential volume of orders under these agreements, regardless of the size of the individual order, may offer the ordering office the opportunity to secure greater discounts. Schedule Contractors are not required to pass on to all schedule users a price reduction extended only to an individual agency for a specific order.

f. Small business. For orders exceeding the micro-purchase threshold, ordering offices should give preference to the items of small business concerns when two or more items at the same delivered price will satisfy the requirement.

g. Documentation. Orders should be documented, at a minimum, by identifying the Contractor the item was purchased from, the item purchased, and the amount paid. If an agency requirement in excess of the micro-purchase threshold is defined so as to require a particular brand name, product, or feature of a product peculiar to one manufacturer, thereby precluding consideration of a product manufactured by another company, the ordering office shall include an explanation in the file as to why the particular brand name, product, or feature is essential to satisfy the agency’s needs.

13. FEDERAL INFORMATION TECHNOLOGY/TELECOMMUNICATION

STANDARDS REQUIREMENTS: Federal departments and agencies acquiring products from this Schedule must comply with the provisions of the Federal Standards Program, as appropriate (reference: NIST Federal Standards Index).

Inquiries to determine whether or not specific products listed herein comply with Federal Information Processing Standards (FIPS) or Federal Telecommunication Standards (FED-STDS), which are cited by ordering offices, shall be responded to promptly by the Contractor.

13.1 FEDERAL INFORMATION PROCESSING STANDARDS

PUBLICATIONS (FIPS PUBS): Information Technology products under this Schedule that do not conform to Federal Information Processing Standards (FIPS) should not be acquired unless a waiver has been granted in accordance with the applicable "FIPS Publication." Federal Information Processing Standards Publications (FIPS PUBS) are issued by the U.S. Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security Act. Information concerning their availability and applicability should be obtained from the National Technical Information Service (NTIS), 5285 Port Royal Road, Springfield, Virginia 22161. FIPS PUBS include voluntary standards when these are adopted for Federal use. Individual orders for FIPS PUBS should be referred to the NTIS Sales Office, and orders for subscription service should be referred to the NTIS Subscription Officer, both at the above address, or telephone number (703) 487-4650.

13.2 FEDERAL TELECOMMUNICATION STANDARDS (FED-STDS):

Telecommunication products under this Schedule that do not conform to Federal Telecommunication Standards (FED-STDS) should not be acquired unless a waiver has been granted in accordance with the applicable "FED-STD." Federal Telecommunication Standards are issued by the U.S. Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security Act. Ordering information and information concerning the availability of FED-STDS should be obtained from the GSA, Federal Supply Service, Specification Section, 470 East L’Enfant Plaza, Suite 8100, SW, Washington, DC 20407, telephone number (202)619- 8925. Please include a self-addressed mailing label when requesting information by mail.

Information concerning their applicability can be obtained by writing or calling the U.S.

Department of Commerce, National Institute of Standards and Technology, Gaithersburg, MD 20899, telephone number (301)975-2833.

14. SECURITY REQUIREMENTS. In the event security requirements are necessary, the ordering activities may incorporate, in their delivery orders, a security clause in accordance with current laws, regulations, and individual agency policy;

however, the burden of administering the security requirements shall be with the ordering agency. If any costs are incurred as a result of the inclusion of security requirements, such costs will not exceed ten percent (10%) or $100,000, of the total dollar value of the order, whichever is lessor.

15. CONTRACT ADMINISTRATION FOR ORDERING OFFICES: Any ordering office, with respect to any one or more delivery orders placed by it under this contract, may exercise the same rights of termination as might the GSA Contracting Officer under provisions of FAR 52.212-4, paragraphs (l) Termination for the Government’s convenience, and (m) Termination for Cause (See C.1.)

16. GSA Advantage!

GSA Advantage! is an on-line, interactive electronic information and ordering system that provides on-line access to vendors' schedule prices with ordering information. GSA Advantage! will allow the user to perform various searches across all contracts including, but not limited to:

(1) Manufacturer;

(2) Manufacturer's Part Number; and

(3) Product categories.

Agencies can browse GSA Advantage! by accessing the Internet World Wide Web utilizing a browser (ex.: Internet Explorer or Firefox). The Internet address is http://www.gsaadvantage.gov/.

17. PURCHASE OF INCIDENTAL, NON-SCHEDULE ITEMS

For administrative convenience, open market (non-contract) items may be added to a Federal Supply Schedule Blanket Purchase Agreement (BPA) or an individual order, provided that the items are clearly labeled as such on the order, all applicable regulations have been followed, and price reasonableness has been determined by the ordering activity for the open market (non-contract) items.

18. CONTRACTOR COMMITMENTS, WARRANTIES AND

REPRESENTATIONS

a. For the purpose of this contract, commitments, warranties and representations include, in addition to those agreed to for the entire schedule contract:

(1) Time of delivery/installation quotations for individual orders;

(2) Technical representations and/or warranties of products concerning performance, total system performance and/or configuration, physical, design and/or functional characteristics and capabilities of a product/equipment/ service/software package submitted in response to requirements which result in orders under this schedule contract.

(3) Any representations and/or warranties concerning the products made in any literature, description, drawings and/or specifications furnished by the Contractor.

b. The above is not intended to encompass items not currently covered by the GSA Schedule contract.

19. OVERSEAS ACTIVITIES

The terms and conditions of this contract shall apply to all orders for equipment in areas listed in the pricelist outside the 48 contiguous states and the District of Columbia, except as indicated below:

N/A

Upon request of the Contractor, the Government may provide the Contractor with logistics support, as available, in accordance with all applicable Government regulations.

Such Government support will be provided on a reimbursable basis, and will only be provided to the Contractor's technical personnel whose services are exclusively required for the fulfillment of the terms and conditions of this contract.

20. YEAR 2000 WARRANTY — COMMERCIAL SUPPLY ITEMS

(a) As used in this clause, “Year 2000 compliant” means, with respect to information technology, that the information technology accurately processes date/time data (including, but not limited to, calculating, comparing, and sequencing) from, into, and between the twentieth and twenty-first centuries, and the years 1999 and 2000 and leap year calculations, to the extent that other information technology used in combination with other information technology, shall accurately process date/time data if the other information technology being acquired, properly exchanges date/time data with it.

(b) The Contractor shall warrant that each hardware, software, and firmware product delivered under this contract shall be able to accurately process date data (including, but not limited to, calculating, comparing, and sequencing) from, into, and between the twentieth and twenty-first centuries, including leap year calculations, when used in accordance with the product documentation provided by the Contractor, provided that all products (e.g. hardware, software, firmware) used in combination with products properly exchange date data with it. If the contract requires that specific listed products must perform as a system in accordance with the foregoing warranty, then that warranty shall apply to those listed products as a system. The duration of this warranty and the remedies available under this warranty shall include repair or replacement of any product whose non-compliance is discovered and made known to the Contractor in writing within ninety (90) days after acceptance (installation is considered acceptance). The Contractor may offer an extended warranty to the Government to include repair or replacement of any product whose non-compliance is discovered and made known to the Contractor in writing at any time prior to June 1, 2000, or for a period of six months following acceptance (installation is considered acceptance) whichever is later. Nothing in this warranty shall be construed to limit any rights or remedies the Government may otherwise have under this contract with respect to defects other than Year 2000 performance.

21. BLANKET PURCHASE AGREEMENTS (BPAs)

Federal Acquisition Regulation (FAR) 13.201(a) defines Blanket Purchase Agreements (BPAs) as “…a simplified method of filling anticipated repetitive needs for supplies or services by establishing ‘charge accounts’ with qualified sources of supply.” The use of Blanket Purchase Agreements under the Federal Supply Schedule Program is authorized in accordance with FAR 13.202(c)(3), which reads, in part, as follows:

“BPAs may be established with Federal Supply Schedule Contractors, if not inconsistent with the terms of the applicable schedule contract.”

Federal Supply Schedule contracts contain BPA provisions to enable schedule users to maximize their administrative and purchasing savings. This feature permits schedule users to set up “accounts” with Schedule Contractors to fill recurring requirements. These accounts establish a period for the BPA and generally address issues such as the frequency of ordering and invoicing, authorized callers, discounts, delivery locations and times.

Agencies may qualify for the best quantity/volume discounts available under the contract, based on the potential volume of business that may be generated through such an agreement, regardless of the size of the individual orders. In addition, agencies may be able to secure a discount higher than that available in the contract based on the aggregate volume of business possible under a BPA. Finally, Contractors may be open to a progressive type of discounting where the discount would increase once the sales accumulated under the BPA reach certain prescribed levels. Use of a BPA may be particularly useful with the new Maximum Order feature. See the Suggested Format, contained in this Schedule Pricelist, for customers to consider when using this purchasing tool.

22. CONTRACTOR TEAM ARRANGEMENTS

Federal Supply Schedule Contractors may use “Contractor Team Arrangements” (see FAR 9.6) to provide solutions when responding to a customer agency requirements. The policy and procedures outlined in this part will provide more flexibility and allow innovative acquisition methods when using the Federal Supply Schedules. See the additional information regarding Contractor Team Arrangements in this Schedule Pricelist.

I. TERMS AND CONDITIONS APPLICABLE TO PURCHASE OF

GENERAL PURPOSE COMMERCIAL INFORMATION TECHNOLOGY

EQUIPMENT

(SPECIAL ITEM NUMBER 132-8)

1. MATERIAL AND WORKMANSHIP

All equipment furnished hereunder must satisfactorily perform the function for which it is intended.

2. ORDER

Written orders, EDI orders (GSA Advantage! and FACNET), credit card orders, and orders placed under blanket purchase agreements (BPA) agreements shall be the basis for purchase in accordance with the provisions of this contract. If time of delivery extends beyond the expiration date of the contract, the Contractor will be obligated to meet the delivery and installation date specified in the original order.

For credit card orders and BPAs, telephone orders are permissible.

3. TRANSPORTATION OF EQUIPMENT

FOB DESTINATION. Prices cover equipment delivery to destination, for any location within the geographic scope of this contract.

4. OPERATING AND MAINTENANCE MANUALS. The Contractor shall furnish the Government with one (1) copy of all operating and maintenance manuals which are normally provided with the equipment being purchased.

5. INSPECTION/ACCEPTANCE

The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The Government reserves the right to inspect or test any equipment that has been tendered for acceptance. The Government may require repair or replacement of nonconforming equipment at no increase in contract price. The Government must exercise its postacceptance rights (1) within a reasonable time after the defect was discovered or should have been discovered; and (2) before any substantial change occurs in the condition of the item, unless the change is due to the defect in the item.

6. WARRANTY

a. Unless specified otherwise in this contract, the Contractor’s standard commercial warranty as stated in the contract’s commercial pricelist will apply to this contract.

**Contractor’s standard Warranty is the standard commercial warranty offered by the manufacturer.**

b. The Contractor warrants and implies that the items delivered hereunder are merchantable and fit for use for the particular purpose described in this contract.

c. Limitation of Liability. Except as otherwise provided by an express or implied warranty, the Contractor will not be liable to the Government for consequential damages resulting from any defect or deficiencies in accepted items.

d. If inspection and repair of defective equipment under this warranty will be performed at the Manufacturer's location on the warranty registration card that is included in the package.

7. PURCHASE PRICE FOR ORDERED EQUIPMENT

The purchase price that the Government will be charged will be the Government purchase price in effect at the time of order placement, or the Government purchase price in effect on the installation date (or delivery date when installation is not applicable), whichever is less.

8. RESPONSIBILITIES OF THE CONTRACTOR

The Contractor shall comply with all laws, ordinances, and regulations (Federal, State, City or otherwise) covering work of this character, and shall include all costs, if any, of such compliance in the prices quoted in this offer.

9. TRADE-IN OF INFORMATION TECHNOLOGY EQUIPMENT

When an agency determines that Information Technology equipment will be replaced, the agency shall follow the contracting policies and procedures in the Federal Acquisition Regulation (FAR), the policies and procedures regarding disposition of information technology excess personal property in the Federal Property Management Regulations (FPMR) (41 CFR 101-43.6), and the policies and procedures on exchange/sale contained in the FPMR (41 CFR part 101-46).

USA COMMITMENT TO PROMOTE

SMALL BUSINESS PARTICIPATION

PROCUREMENT PROGRAMS

PREAMBLE

A&T Marketing, Inc. provides commercial products to the Federal Government. We are committed to promoting participation of small, small disadvantaged and women-owned small businesses in our contracts. We pledge to provide opportunities to the small business community through reselling opportunities, mentor-protégé programs, joint ventures, teaming arrangements, and subcontracting.

COMMITMENT

To actively seek and partner with small businesses.

To identify, qualify, mentor and develop small, small disadvantaged and women-owned small businesses by purchasing from these businesses whenever practical.

To develop and promote company policy initiatives that demonstrate our support for awarding contracts and subcontracts to small business concerns.

To undertake significant efforts to determine the potential of small, small disadvantaged and women-owned small business to supply products and services to our company.

To insure procurement opportunities are designed to permit the maximum possible participation of small, small disadvantaged, and women-owned small businesses.

To attend business opportunity workshops, minority business enterprise seminars, trade fairs, procurement conferences, etc., to identify and increase small businesses with whom to partner.

To publicize in our marketing publications our interest in meeting small businesses that may be interested in subcontracting opportunities.

We signify our commitment to work in partnership with small, small disadvantaged and women-owned small businesses to promote and increase their participation in Federal Government contracts. To accelerate potential opportunities please contact Tony Gharbawi, phone number 410-312-9900, e-mail address tonyg@atnetworks.com and fax number 240-399-1330.

mailto:tonyg@atnetworks.com

BEST VALUE

BLANKET PURCHASE AGREEMENT

FEDERAL SUPPLY SCHEDULE

(Insert Customer Name)

In the spirit of the Federal Acquisition Streamlining Act (Agency) and A&T Marketing, Inc.. enter into a cooperative agreement to further reduce the administrative costs of acquiring commercial items from the General Services Administration (GSA) Federal Supply Schedule Contract(s) ____________________.

Federal Supply Schedule contract BPAs eliminate contracting and open market costs such as: search for sources; the development of technical documents, solicitations and the evaluation of offers. Teaming Arrangements are permitted with Federal Supply Schedule Contractors in accordance with Federal Acquisition Regulation (FAR) 9.6.

This BPA will future decrease costs, reduce paperwork, and save time by eliminating the need for repetitive, individual purchases from the schedule contract. The end result is to create a purchasing mechanism for the Government that works better and costs less.

Signatures

AGENCY DATE A&T Marketing, Inc. DATE

BPA NUMBER_____________

(CUSTOMER NAME)

BLANKET PURCHASE AGREEMENT

Pursuant to GSA Federal Supply Schedule Contract Number(s)____________, Blanket Purchase Agreements, the Contractor agrees to the following terms of a Blanket Purchase Agreement (BPA) EXCLUSIVELY WITH (Ordering Agency):

(1) The following contract items can be ordered under this BPA. All orders placed against this BPA are subject to the terms and conditions of the contract, except as noted below:

MODEL NUMBER/PART NUMBER *SPECIAL BPA

DISCOUNT/PRICE

132-8 132-9

(2) Delivery:

DESTINATION DELIVERY SCHEDULE/DATES

FOB 15-30 days

(3) The Government estimates, but does not guarantee, that the volume of purchases through this agreement will be ______________.

(4) This BPA does not obligate any funds.

(5) This BPA expires on _________________ or at the end of the contract period, whichever is earlier.

(6) The following office(s) is hereby authorized to place orders under this BPA:

OFFICE POINT OF CONTACT

(7) Orders will be placed against this BPA via Electronic Data Interchange (EDI), FAX, or paper.

(8) Unless otherwise agreed to, all deliveries under this BPA must be accompanied by delivery tickets or sales slips that must contain the following information as a minimum:

(a) Name of Contractor;

(b) Contract Number;

(c) BPA Number;

(d) Model Number or National Stock Number (NSN);

(e) Purchase Order Number;

(f) Date of Purchase;

(g) Quantity, Unit Price, and Extension of Each Item (unit prices and extensions need not be shown when incompatible with the use of automated systems; provided, that the invoice is itemized to show the information); and

(h) Date of Shipment.

(9) The requirements of a proper invoice are specified in the Federal Supply Schedule contract. Invoices will be submitted to the address specified within the purchase order transmission issued against this BPA.

(10) The terms and conditions included in this BPA apply to all purchases made pursuant to it. In the event of an inconsistency between the provisions of this BPA and the Contractor’s invoice, the provisions of this BPA will take precedence.

BASIC GUIDELINES FOR USING

“CONTRACTOR TEAM ARRANGEMENTS”

Federal Supply Schedule Contractors may use “Contractor Team Arrangements” (see FAR 9.6) to provide solutions when responding to a customer agency requirements.

These Team Arrangements can be included under a Blanket Purchase Agreement (BPA).

BPAs are permitted under all Federal Supply Schedule contracts.

Orders under a Team Arrangement are subject to terms and conditions or the Federal Supply Schedule Contract.

Participation in a Team Arrangement is limited to Federal Supply Schedule Contractors.

Customers should refer to FAR 9.6 for specific details on Team Arrangements.

Here is a general outline on how it works:

• The customer identifies their requirements.

• Federal Supply Schedule Contractors may individually meet the customers needs, or -

• Federal Supply Schedule Contractors may individually submit a Schedules “Team Solution” to meet the customer’s requirement.

• Customers make a best value selection.

TEAMING AGREEMENT

NO TEAMING AGREEMENTS FOR THE CURRENT PERIOD.

For questions, please contact

Tony Gharbawi – Contract Administrator tonyg@atnetworks.com P: 410-312-9900 X 301 F: 240-399-1330 mailto:tonyg@atnetworks.com

RETURN POLICY

All claims have to be submitted within 30 days from upon receipt of order in writing to the emails below. A return Authorization number must be obtained before shipping your item(s) to the returns center for that particular item.

For faster service, please email us at CS@atnetworks.com and/or gsasales@atnetworks.com, and we will process your request per the guidelines below.

Put the PO# XXX in the subject line.

List the items that you need to return. (Quantities and part numbers).

The condition of each item. (Factory sealed/unopened or opened with a reason).

Credit requested or exchange for each p/n.

A refund will be issued upon receipt and acceptance of your items for each condition below. A credit memo will be issued and used to refund your credit card, mail you a check or applied as a payment towards the replacement order.

Any questions please contact cs@atnetworks.com

Returns Guidelines

1. Unopened/Factory Sealed Return (in fully resellable condition - i.e. no stickers, markings, etc.)

a. Customer can request a return within 30 days of shipment by email.

b. Memory can only be exchanged from A&T.

c. Shipping and credit card charges are not refundable. Restocking fees might apply.

2. Defective or Dead on Arrival (DOA)

A&T will replace the product at no cost to the customer under the following conditions.

a. Customer contacts A&T Tech Support to verify that the issue cannot be resolved over the phone.

b. Item must be packaged in original box with all package contents.

c. No stickers or markings on the item or the box.

3. Freight Lost or Damage

A case will be issued with the carrier.

mailto:CS@atnetworks.com mailto:gsasales@atnetworks.com

a. If a shipment is lost the carrier will issue a trace on it. If the shipment is retrieved A&T will close the case and consider the order completed, otherwise A&T will replace the lost item at no cost to the customer as soon as the trace ticket is closed.

b. If the item is damaged the customer will package the item in the same condition it came in and A&T will replace the item at no cost to the customer.

4. Overgoods

Products not authorized for return, did not meet the guidelines of an RMA or opened/used shall be defined as "overgoods." Overgoods may be returned to you at your expense. If A&T and customer agrees on the return conditions, A&T will issue a credit for the last purchase price, or the current price or the cost of goods less a restocking fee.