Federal Supply Schedule GS35F0356R

Proposed change page, 2-4-09, DH

AUTHORIZED FEDERAL SUPPLY SERVICE

INFORMATION TECHNOLOGY SCHEDULE PRICELIST

GENERAL PURPOSE COMMERCIAL INFORMATION TECHNOLOGY

EQUIPMENT, SOFTWARE AND SERVICES

Tactronics is a proven leader in ultra-rugged tactical integrated electronic systems that support the operational goal of force interoperability (fusing of data, sensors, systems and people within the larger scheme of information superiority). As a key supplier to the United States Special Forces (SOF), Tactronics is firmly grounded in the lastest leading edge technologies and disciplines, delivering the “best value” in the next generation electronic systems today.

Special Item No. 132-8 Purchase of Equipment Special Item No. 132-12 Maintenance, Repair Service and Repair Parts/Spare Parts Special Item No. 132-51 Information Technology Professional Services

Note: All non-professional labor categories must be incidental to and used solely to support hardware, software and/or professional services, and cannot be purchased separately.

ODCs (Other Direct Costs) are not part of this contract and should be treated as open market purchases. Ordering Activities procuring open market items must follow FAR 8.401(d).

SIN 132-8 PURCHASE OF EQUIPMENT

FSC CLASS 7010 - SYSTEM CONFIGURATION

Laptop/Portable/Notebook Computers

FSC CLASS 7025 - INPUT/OUTPUT AND STORAGE DEVICES

PrintersDisplay Network Equipment Storage Devices including Magnetic Storage, Magnetic Tape Storage and Optical Disk Storage

FSC CLASS 5995 - CABLE, CORD, AND WIRE ASSEMBLIES: COMMUNICATIONS EQUIPMENT

Communications Equipment Cables

FSC CLASS 5830 - INTERCOMMUNICATION AND PUBLIC ADDRESS SYSTEMS, EXCEPT

AIRBORNE

Pagers and Public Address Systems (wired and wireless transmissions, including background music systems)

FSC CLASS 5895 - MISCELLANEOUS COMMUNICATION EQUIPMENT

Miscellaneous Communications Equipment

Tactronic’s www.tactronic.com Pg 2

SIN 132-12 - MAINTENANCE OF EQUIPMENT, REPAIR SERVICE, AND REPAIR PARTS/SPARE

PARTS (FPDS Code J070 - Maintenance and Repair Service)(Repair Parts/Spare Parts - See FSC Class for basic equipment)

- Repair Service

- Repair Parts/Spare Parts

SIN 132-51 - INFORMATION TECHNOLOGY (IT) PROFESSIONAL SERVICES

FPDS Code D308 Programming Services FPDS Code D399 Other Information Technology Services, Not Elsewhere Classified

Note 1: All non-professional labor categories must be incidental to and used solely to support hardware, software and/or professional services, and cannot be purchased separately.

Note 2: Offerors and Agencies are advised that the Group 70 – Information Technology Schedule is not to be used as a means to procure services which properly fall under the Brooks Act. These services include, but are not limited to, architectural, engineering, mapping, cartographic production, remote sensing, geographic information systems, and related services. FAR 36.6 distinguishes between mapping services of an A/E nature and mapping services which are not connected nor incidental to the traditionally accepted A/E Services.

Note 3: This solicitation is not intended to solicit for the reselling of IT Professional Services, except for the provision of implementation, maintenance, integration, or training services in direct support of a product.

Under such circumstances the services must be performance by the publisher or manufacturer or one of their authorized agents.

Tactronics Group International LLC, dba Tactronics Div

10 Pinehurst Drive

Bellport, NY 11713

631.775.2100 www.tactronics.com

Contract Number: GS-35F-0356R

Period Covered by Contract: February 16, 2005 through February 15, 2010

Current through GSA mod PO-0004, effective 6-4-09

General Services Administration Federal Acquistion Service

Products and ordering information in this Authorized FAS Information Technology Schedule Pricelist are also available on the GSA Advantage! System. Agencies can browse GSA Advantage! by accessing the Federal Supply Service’s Home Page via the Internet at http://www.fss.gsa.gov/

Tactronic’s www.tactronic.com Pg 3

Table of Contents

Page(s)

1. INFORMATION FOR ORDERING OFFICES. 4-12

2. TERMS AND CONDITIONS APPLICABLE PURCHASE OF GENERAL PURCHASE 13-14

COMMERCIAL INFORMATION TECHNOLOGY EQUIPMENT (SIN 132-8).

3. TERMS AND CONDITIONS APPLICABLE TO MAINTENANCE AND REPAIR 15-18

(SIN 132-12).

4. TERMS AND CONDITIONS APPLICABLE TO INFORMATION TECHNOLOGY (IT) 19-25

PROFESSIONAL SERVICES (SPECIAL ITEM NUMBER 132-51).

5. USA COMMITMENT TO PROMOTE SMALL BUSINESS PARTICIPATION 26

PROCUREMENT PROGRAMS.

6. AUTHORIZED INFORMATION TECHNOLOGY SCHEDULE PRICELIST (ATTACHED) 27-45

Tactronic’s www.tactronic.com Pg 4

INFORMATION FOR ORDERING ACTIVITIES

APPLICABLE TO ALL SPECIAL ITEM NUMBERS

SPECIAL NOTICE TO AGENCIES: Small Business Participation

SBA strongly supports the participation of small business concerns in the Federal Supply Schedules Program. To enhance Small Business Participation SBA policy allows agencies to include in their procurement base and goals, the dollar value of orders expected to be placed against the Federal Supply Schedules, and to report accomplishments against these goals.

For orders exceeding the micropurchase threshold, FAR 8.404 requires agencies to consider the catalogs/pricelists of at least three schedule contractors or consider reasonably available information by using the GSA Advantage!™ on-line shopping service (www.fss.gsa.gov). The catalogs/pricelists, GSA Advantage!™ and the Federal Supply Service Home Page (www.fss.gsa.gov) contain information on a broad array of products and services offered by small business concerns.

This information should be used as a tool to assist ordering activities in meeting or exceeding established small business goals. It should also be used as a tool to assist in including small, small disadvantaged, and women-owned small businesses among those considered when selecting pricelists for a best value determination.

For orders exceeding the micropurchase threshold, customers are to give preference to small business concerns when two or more items at the same delivered price will satisfy their requirement.

1. GEOGRAPHIC SCOPE OF CONTRACT:

Domestic delivery is delivery within the 48 contiguous states, Alaska, Hawaii, Puerto Rico, Washington, DC, and U.S. Territories. Domestic delivery also includes a port or consolidation point, within the aforementioned areas, for orders received from overseas activities.

Overseas delivery is delivery to points outside of the 48 contiguous states, Washington, DC, Alaska, Hawaii, Puerto Rico, and U.S. Territories.

Offerors are requested to check one of the following boxes:

[ X ] The Geographic Scope of Contract will be domestic and overseas delivery.

2. CONTRACTOR'S ORDERING ADDRESS AND PAYMENT INFORMATION:

Contractors are required to accept credit cards for payments equal to or less than the micro-purchase threshold for oral or written delivery orders. Credit cards willbe acceptable for payment above the micro-purchase threshold. In addition, bank account information for wire transfer payments will be shown on the invoice.

The following telephone number(s) can be used by ordering activities to obtain technical and/or ordering assistance:

631-775.2100

Tactronic’s www.tactronic.com Pg 5

When Authorized Dealers are allowed by the Contractor to bill ordering activities and accept payment, the order and/or payment must be in the name of the Contractor, in care of the Authorized Dealer.

Dealer Agents

BLK Technologies

2 South Main Street

Suite 104

Middletown, MA 01949

978-777-7339

POC: Jim Davis, jim@blktechnologies.com

Bruhn NewTech

10420 Little Patuxent Parkway

Suite 301

Columbia, MD 21044

410-884-1700

POC: Bruce Windesheim, bpw@bruhn-newtech.com

PFU Systems, Inc

206 New Edition Court

Cary, NC 27511-4451

919-390-0900

POC: Jim Pierce, jim.pierce@pfusystems.com

Unitronix

P.O. Box 486

Mosisett NSW 2264

Australia

61-24977-3511

POC: Tim Marshall, tmarshall@unitronix.com

3. LIABILITY FOR INJURY OR DAMAGE

The Contractor shall not be liable for any injury to ordering activity personnel or damage to ordering activity property arising from the use of equipment maintained by the Contractor, unless such injury or damage is due to the fault or negligence of the Contractor.

Tactronic’s www.tactronic.com Pg 6

4. STATISTICAL DATA FOR GOVERNMENT ORDERING OFFICE COMPLETION OF

STANDARD FORM 279:

Block 9: G. Order/Modification Under Federal Schedule Block 16: Data Universal Numbering System (DUNS) Number: 87-692-7513 Block 30: Type of Contractor - B. Other Small Business

Block 31: Woman-Owned Small Business - No Block 36: Contractor's Taxpayer Identification Number (TIN): 52-2137194

4a. CAGE CODE: 1RVQ3

4b. Contractor has registered with the Central Contractor Registration Database.

5. FOB DESTINATION for Continental United States (CONUS) and FOB Destination to Port of Embarkation for Outside Continental United States (OCONUS).

6. DELIVERY SCHEDULE

a. TIME OF DELIVERY: The Contractor shall deliver to destination within the number of calendar days after receipt of order (ARO), as set forth below:

SPECIAL ITEM NUMBER DELIVERY TIME (Days ARO)

132-8 30 Days

132-12 30 Days

132-51 As mutually agreed

Expediated delivery of products and/or services will be quoted, when requested and when available and shall be FOB Origin for 132-8 and 132-12 (Repair Parts).

b. URGENT REQUIREMENTS: When the Federal Supply Schedule contract delivery period does not meet the bona fide urgent delivery requirements of an ordering activity, ordering activities are encouraged, if time permits, to contact the Contractor for the purpose of obtaining accelerated delivery. The Contractor shall reply to the inquiry within 3 workdays after receipt. (Telephonic replies shall be confirmed by the Contractor in writing.) If the Contractor offers an accelerated delivery time acceptable to the ordering activity, any order(s) placed pursuant to the agreed upon accelerated delivery time frame shall be delivered within this shorter delivery time and in accordance with all other terms and conditions of the contract.

7. DISCOUNTS: Prices shown are NET Prices; Basic Discounts have been deducted.

a. Prompt Payment: Net 30 days from receipt of invoice or date of acceptance, whichever is later.

b. Quantity-None

c. Dollar Volume-None

d. Government Educational Institutions are offered the same discounts as all other Government customers.

8. TRADE AGREEMENTS ACT OF 1979, AS AMENDED:

All items are U.S. made end products, designated country end products, Caribbean Basin country end products, Canadian end products, or Mexican end products as defined in the Trade Agreements Act of 1979, as amended.

Tactronic’s www.tactronic.com Pg 7

9. STATEMENT CONCERNING AVAILABILITY OF EXPORT PACKING: Not applicable.

10. SMALL REQUIREMENTS: The minimum dollar value of orders to be issued is $100.

11. Maximum Order (All dollar amounts are exclusive of any discount for prompt payment.)

a. The Maximum Order value for the following Special Item Numbers (SINs) is $500,000:

Special Item Number 132-8 - Purchase of Equipment Special Item Number 132-12 – Maintenance of Equipment Special Item Number 132-51 - Information Technology (IT) Professional Services

12. USE OF FEDERAL SUPPLY SERVICE INFORMATION TECHNOLOGY SCHEDULE

CONTRACTS.

Ordering activities shall use the ordering procedures of Federal Acquisition Regulation (FAR) 8.405 when placing an order or establishing a BPA for supplies or services. These procedures apply to all schedules.

a. FAR 8.405-1 Ordering procedures for supplies, and services not requiring a statement of work.

b. FAR 8.405-2 Ordering procedures for services requiring a statement of work.

13. FEDERAL INFORMATION TECHNOLOGY/TELECOMMUNICATION STANDARDS

REQUIREMENTS: ordering activities acquiring products from this Schedule must comply with the provisions of the Federal Standards Program, as appropriate (reference: NIST Federal Standards Index). Inquiries to determine whether or not specific products listed herein comply with Federal Information Processing Standards (FIPS) or Federal Telecommunication Standards (FED-STDS), which are cited by ordering activities, shall be responded to promptly by the Contractor.

13.1 FEDERAL INFORMATION PROCESSING STANDARDS PUBLICATIONS (FIPS PUBS):

Information Technology products under this Schedule that do not conform to Federal Information Processing Standards (FIPS) should not be acquired unless a waiver has been granted in accordance with the applicable "FIPS Publication." Federal Information Processing Standards Publications (FIPS PUBS) are issued by the U.S.

Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security Act. Information concerning their availability and applicability should be obtained from the National Technical Information Service (NTIS), 5285 Port Royal Road, Springfield, Virginia 22161. FIPS PUBS include voluntary standards when these are adopted for Federal use. Individual orders for FIPS PUBS should be referred to the NTIS Sales Office, and orders for subscription service should be referred to the NTIS Subscription Officer, both at the above address, or telephone number (703) 487-4650.

13.2 FEDERAL TELECOMMUNICATION STANDARDS (FED-STDS): Telecommunication products under this Schedule that do not conform to Federal Telecommunication Standards (FED-STDS) should not be acquired unless a waiver has been granted in accordance with the applicable "FED-STD." Federal Telecommunication Standards are issued by the U.S. Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security Act. Ordering information and information concerning the availability of FED-STDS should be obtained from the GSA, Federal Acquisition Service, Specification Section, 470 East L’Enfant Plaza, Suite 8100, SW, Washington, DC 20407, telephone number (202)619-8925. Please include a self-addressed mailing label when requesting information by mail. Information concerning their

Tactronic’s www.tactronic.com Pg 8 applicability can be obtained by writing or calling the U.S. Department of Commerce, National Institute of Standards and Technology, Gaithersburg, MD 20899, telephone number (301)975-2833.

14. CONTRACTOR TASKS / SPECIAL REQUIREMENTS (C-FSS-370) (NOV 2003)

(a) Security Clearances: The Contractor may be required to obtain/possess varying levels of security clearances in the performance of orders issued under this contract. All costs associated with obtaining/possessing such security clearances should be factored into the price offered under the Multiple Award Schedule.

(b) Travel: The Contractor may be required to travel in performance of orders issued under this contract.

Allowable travel and per diem charges are governed by Pub .L. 99-234 and FAR Part 31, and are reimbursable by the ordering agency or can be priced as a fixed price item on orders placed under the Multiple Award Schedule. Travel in performance of a task order will only be reimbursable to the extent authorized by the ordering agency. The Industrial Funding Fee does NOT apply to travel and per diem charges.

(c) Certifications, Licenses and Accreditations: As a commercial practice, the Contractor may be required to obtain/possess any variety of certifications, licenses and accreditations for specific FSC/service code classifications offered. All costs associated with obtaining/ possessing such certifications, licenses and accreditations should be factored into the price offered under the Multiple Award Schedule program.

(d) Insurance: As a commercial practice, the Contractor may be required to obtain/possess insurance coverage for specific FSC/service code classifications offered. All costs associated with obtaining/possessing such insurance should be factored into the price offered under the Multiple Award Schedule program.

(e) Personnel: The Contractor may be required to provide key personnel, resumes or skill category descriptions in the performance of orders issued under this contract. Ordering activities may require agency approval of additions or replacements to key personnel.

(f) Organizational Conflicts of Interest: Where there may be an organizational conflict of interest as determined by the ordering agency, the Contractor’s participation in such order may be restricted in accordance with FAR Part 9.5.

(g) Documentation/Standards: The Contractor may be requested to provide products or services in accordance with rules, regulations, OMB orders, standards and documentation as specified by the agency’s order.

(h) Data/Deliverable Requirements: Any required data/deliverables at the ordering level will be as specified or negotiated in the agency’s order.

(i) Government-Furnished Property: As specified by the agency’s order, the Government may provide property, equipment, materials or resources as necessary.

(j) Availability of Funds: Many Government agencies’ operating funds are appropriated for a specific fiscal year.

Funds may not be presently available for any orders placed under the contract or any option year. The Government’s obligation on orders placed under this contract is contingent upon the availability of appropriated funds from which payment for ordering purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are available to the ordering Contracting Officer.

(k) Overtime: For professional services, the labor rates in the Schedule should not vary by virtue of the Contractor having worked overtime. For services applicable to the Service Contract Act (as identified in the Schedule), the labor rates in the Schedule will vary as governed by labor laws (usually assessed a time and a half of the labor rate).

Tactronic’s www.tactronic.com Pg 9

15. CONTRACT ADMINISTRATION FOR ORDERING ACTIVITIES: Any ordering activity, with respect to any one or more delivery orders placed by it under this contract, may exercise the same rights of termination as might the GSA Contracting Officer under provisions of FAR 52.212-4, paragraphs (l) Termination for the ordering activity’s convenience, and (m) Termination for Cause (See 52.212-4)

16. GSA ADVANTAGE!

GSA Advantage! is an on-line, interactive electronic information and ordering system that provides on-line access to vendors' schedule prices with ordering information. GSA Advantage! will allow the user to perform various searches across all contracts including, but not limited to:

(1) Manufacturer;

(2) Manufacturer's Part Number; and

(3) Product categories.

Agencies can browse GSA Advantage! by accessing the Internet World Wide Web utilizing a browser (ex.:

NetScape). The Internet address is http://www.fss.gsa.gov/.

17. PURCHASE OF OPEN MARKET ITEMS

NOTE: Open Market Items are also known as incidental items, noncontract items, non-Schedule items, and items not on a Federal Supply Schedule contract. ODCs (Other Direct Costs) are not part of this contract and should be treated as open market purchases. Ordering Activities procuring open market items must follow FAR 8.402(f).

For administrative convenience, an ordering activity contracting officer may add items not on the Federal Supply Multiple Award Schedule (MAS) -- referred to as open market items -- to a Federal Supply Schedule blanket purchase agreement (BPA) or an individual task or delivery order, only if-

(1) All applicable acquisition regulations pertaining to the purchase of the items not on the Federal Supply Schedule have been followed (e.g., publicizing (Part 5), competition requirements (Part 6), acquisition of commercial items (Part 12), contracting methods (Parts 13, 14, and 15), and small business programs (Part 19));

(2) The ordering activity contracting officer has determined the price for the items not on the Federal Supply Schedule is fair and reasonable;

(3) The items are clearly labeled on the order as items not on the Federal Supply Schedule; and

(4) All clauses applicable to items not on the Federal Supply Schedule are included in the order.

18. CONTRACTOR COMMITMENTS, WARRANTIES AND REPRESENTATIONS

a. For the purpose of this contract, commitments, warranties and representations include, in addition to those agreed to for the entire schedule contract:

(1) Time of delivery/installation quotations for individual orders;

(2) Technical representations and/or warranties of products concerning performance, total system performance and/or configuration, physical, design and/or functional characteristics and capabilities of a

Tactronic’s www.tactronic.com Pg 10 product/equipment/ service/software package submitted in response to requirements which result in orders under this schedule contract.

(3) Any representations and/or warranties concerning the products made in any literature, description, drawings and/or specifications furnished by the Contractor.

b. The above is not intended to encompass items not currently covered by the GSA Schedule contract.

19. OVERSEAS ACTIVITIES

The terms and conditions of this contract shall apply to all orders for installation, maintenance and repair of equipment in areas listed in the pricelist outside the 48 contiguous states and the District of Columbia, except as indicated below:

None.

Upon request of the Contractor, the ordering activity may provide the Contractor with logistics support, as available, in accordance with all applicable ordering activity regulations. Such ordering activity support will be provided on a reimbursable basis, and will only be provided to the Contractor's technical personnel whose services are exclusively required for the fulfillment of the terms and conditions of this contract.

20. BLANKET PURCHASE AGREEMENTS (BPAs)

The use of BPAs under any schedule contract to fill repetitive needs for supplies or services is allowable. BPAs may be established with one or more schedule contractors. The number of BPAs to be established is within the discretion of the ordering activity establishing the BPA and should be based on a strategy that is expected to maximize the effectiveness of the BPA(s). Ordering activities shall follow FAR 8.405-3 when creating and implementing BPA(s).

21. CONTRACTOR TEAM ARRANGEMENTS

Contractors participating in contractor team arrangements must abide by all terms and conditions of their respective contracts. This includes compliance with Clauses 552.238-74, Industrial Funding Fee and Sales Reporting, i.e., each contractor (team member) must report sales and remit the IFF for all products and services provided under its individual contract.

22. INSTALLATION, DEINSTALLATION, REINSTALLATION

The Davis-Bacon Act (40 U.S.C. 276a-276a-7) provides that contracts in excess of $2,000 to which the United States or the District of Columbia is a party for construction, alteration, or repair (including painting and decorating) of public buildings or public works with the United States, shall contain a clause that no laborer or mechanic employed directly upon the site of the work shall received less than the prevailing wage rates as determined by the Secretary of Labor. The requirements of the Davis-Bacon Act do not apply if the construction work is incidental to the furnishing of supplies, equipment, or services. For example, the requirements do not apply to simple installation or alteration of a public building or public work that is incidental to furnishing supplies or equipment under a supply contract. However, if the construction, alteration or repair is segregable and exceeds $2,000, then the requirements of the Davis-Bacon Act applies.

The ordering activity issuing the task order against this contract will be responsible for proper administration and enforcement of the Federal labor standards covered by the Davis-Bacon Act. The proper Davis-Bacon wage determination will be issued by the ordering activity at the time a request for quotations is made for applicable construction classified installation, deinstallation, and reinstallation services under SIN 132-8.

23. SECTION 508 COMPLIANCE.

If applicable, Section 508 compliance information on the supplies and services in this contract are available in Electronic and Information Technology (EIT) at the following:

www.tactronics.com/508.html

The EIT standard can be found at: www.Section508.gov/.

Tactronic’s www.tactronic.com Pg 11

24. PRIME CONTRACTOR ORDERING FROM FEDERAL SUPPLY SCHEDULES.

Prime Contractors (on cost reimbursement contracts) placing orders under Federal Supply Schedules, on behalf of an ordering activity, shall follow the terms of the applicable schedule and authorization and include with each order

(a) A copy of the authorization from the ordering activity with whom the contractor has the prime contract (unless a copy was previously furnished to the Federal Supply Schedule contractor); and

(b) The following statement:

This order is placed under written authorization from _______ dated _______. In the event of any inconsistency between the terms and conditions of this order and those of your Federal Supply Schedule contract, the latter will govern.

25. INSURANCE—WORK ON A GOVERNMENT INSTALLATION (JAN 1997)(FAR 52.228-5)

(a) The Contractor shall, at its own expense, provide and maintain during the entire performance of this contract, at least the kinds and minimum amounts of insurance required in the Schedule or elsewhere in the contract.

(b) Before commencing work under this contract, the Contractor shall notify the Contracting Officer in writing that the required insurance has been obtained. The policies evidencing required insurance shall contain an endorsement to the effect that any cancellation or any material change adversely affecting the Government's interest shall not be effective—

(1) For such period as the laws of the State in which this contract is to be performed prescribe; or

(2) Until 30 days after the insurer or the Contractor gives written notice to the Contracting Officer, whichever period is longer.

(c) The Contractor shall insert the substance of this clause, including this paragraph (c), in subcontracts under this contract that require work on a Government installation and shall require subcontractors to provide and maintain the insurance required in the Schedule or elsewhere in the contract. The Contractor shall maintain a copy of all subcontractors' proofs of required insurance, and shall make copies available to the Contracting Officer upon request.

26. SOFTWARE INTEROPERABILITY.

Offerors are encouraged to identify within their software items any component interfaces that support open standard interoperability. An item’s interface may be identified as interoperable on the basis of participation in a Government agency-sponsored program or in an independent organization program. Interfaces may be identified by reference to an interface registered in the component registry located at http://www.core.gov.

27. ADVANCE PAYMENTS

A payment under this contract to provide a service or deliver an article for the United States Government may not be more than the value of the service already provided or the article already delivered. Advance or pre-payment is not authorized or allowed under this contract. (31 U.S.C. 3324)

Tactronic’s www.tactronic.com Pg 12

24. PRIME CONTRACTOR ORDERING FROM FEDERAL SUPPLY SCHEDULES.

Prime Contractors (on cost reimbursement contracts) placing orders under Federal Supply Schedules, on behalf of an ordering activity, shall follow the terms of the applicable schedule and authorization and include with each order

(a) A copy of the authorization from the ordering activity with whom the contractor has the prime contract (unless a copy was previously furnished to the Federal Supply Schedule contractor); and

(b) The following statement:

This order is placed under written authorization from _______ dated _______. In the event of any inconsistency between the terms and conditions of this order and those of your Federal Supply Schedule contract, the latter will govern.

25. INSURANCE—WORK ON A GOVERNMENT INSTALLATION (JAN 1997)(FAR 52.228-5)

(a) The Contractor shall, at its own expense, provide and maintain during the entire performance of this contract, at least the kinds and minimum amounts of insurance required in the Schedule or elsewhere in the contract.

(b) Before commencing work under this contract, the Contractor shall notify the Contracting Officer in writing that the required insurance has been obtained. The policies evidencing required insurance shall contain an endorsement to the effect that any cancellation or any material change adversely affecting the Government's interest shall not be effective—

(1) For such period as the laws of the State in which this contract is to be performed prescribe; or

(2) Until 30 days after the insurer or the Contractor gives written notice to the Contracting Officer, whichever period is longer.

(c) The Contractor shall insert the substance of this clause, including this paragraph (c), in subcontracts under this contract that require work on a Government installation and shall require subcontractors to provide and maintain the insurance required in the Schedule or elsewhere in the contract. The Contractor shall maintain a copy of all subcontractors' proofs of required insurance, and shall make copies available to the Contracting Officer upon request.

Tactronic’s www.tactronic.com Pg 13

TERMS AND CONDITIONS APPLICABLE TO PURCHASE OF

GENERAL PURPOSE COMMERCIAL INFORMATION TECHNOLOGY EQUIPMENT

(SPECIAL ITEM NUMBER 132-8)

1. MATERIAL AND WORKMANSHIP

All equipment furnished hereunder must satisfactorily perform the function for which it is intended.

2. ORDER

Written orders, EDI orders (GSA Advantage! and FACNET), credit card orders, and orders placed under blanket purchase agreements (BPA) agreements shall be the basis for purchase in accordance with the provisions of this contract. If time of delivery extends beyond the expiration date of the contract, the Contractor will be obligated to meet the delivery and installation date specified in the original order.

For credit card orders and BPAs, telephone orders are permissible.

3. TRANSPORTATION OF EQUIPMENT

FOB DESTINATION. Prices cover equipment delivery to destination, for any location within the geographic scope of this contract.

4. INSTALLATION AND TECHNICAL SERVICES

a. INSTALLATION. When the equipment provided under this contract is not normally self-installable, the Contractor's technical personnel shall be available to the ordering activity, at the ordering activity's location, to install the equipment and to train ordering activity personnel in the use and maintenance of the equipment. The charges, if any, for such services are listed below, or in the price schedule:

The equipment is normally self-installable, however, if the ordering activity requests installation pricing, it will be quoted on an individual open market project basis.

b. INSTALLATION, DEINSTALLATION, REINSTALLATION. The Davis-Bacon Act (40 U.S.C. 276a- 276a-7) provides that contracts in excess of $2,000 to which the United States or the District of Columbia is a party for construction, alteration, or repair (including painting and decorating) of public buildings or public works with the United States, shall contain a clause that no laborer or mechanic employed directly upon the site of the work shall received less than the prevailing wage rates as determined by the Secretary of Labor. The requirements of the Davis-Bacon Act do not apply if the construction work is incidental to the furnishing of supplies, equipment, or services. For example, the requirements do not apply to simple installation or alteration of a public building or public work that is incidental to furnishing supplies or equipment under a supply contract. However, if the construction, alteration or repair is segregable and exceeds $2,000, then the requirements of the Davis-Bacon Act applies.

The ordering activity issuing the task order against this contract will be responsible for proper administration and enforcement of the Federal labor standards covered by the Davis-Bacon Act. The proper Davis-Bacon wage determination will be issued by the ordering activity at the time a request for quotations is made for applicable construction classified installation, deinstallation, and reinstallation services under SIN 132-8.

c. OPERATING AND MAINTENANCE MANUALS. The Contractor shall furnish the ordering activity with one (1) copy of all operating and maintenance manuals which are normally provided with the equipment being purchased.

Tactronic’s www.tactronic.com Pg 14

5. INSPECTION/ACCEPTANCE

The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The ordering activity reserves the right to inspect or test any equipment that has been tendered for acceptance. The ordering activity may require repair or replacement of nonconforming equipment at no increase in contract price.

The ordering activity must exercise its postacceptance rights (1) within a reasonable time after the defect was discovered or should have been discovered; and (2) before any substantial change occurs in the condition of the item, unless the change is due to the defect in the item.

6. WARRANTY

a. Unless specified otherwise in this contract, the Contractor’s standard commercial warranty as stated in the contract’s commercial pricelist will apply to this contract.

All repair work will be guaranteed/warranted for a period of 1 year parts and labor and 2 years parts thereafter, unless an extended warranty has been purchased.

b. The Contractor warrants and implies that the items delivered hereunder are merchantable and fit for use for the particular purpose described in this contract.

c. Limitation of Liability. Except as otherwise provided by an express or implied warranty, the Contractor will not be liable to the ordering activity for consequential damages resulting from any defect or deficiencies in accepted items.

d. If inspection and repair of defective equipment under this warranty will be performed at the Contractor's plant, the address is as follows: 381-12 Old Riverhead Road, Suite 12, Westhampton Beach, NY 11978

7. PURCHASE PRICE FOR ORDERED EQUIPMENT

The purchase price that the ordering activity will be charged will be the ordering activity purchase price in effect at the time of order placement, or the ordering activity purchase price in effect on the installation date (or delivery date when installation is not applicable), whichever is less.

8. RESPONSIBILITIES OF THE CONTRACTOR

The Contractor shall comply with all laws, ordinances, and regulations (Federal, State, City or otherwise) covering work of this character, and shall include all costs, if any, of such compliance in the prices quoted in this offer.

9. TRADE-IN OF INFORMATION TECHNOLOGY EQUIPMENT

When an ordering activity determines that Information Technology equipment will be replaced, the ordering activity shall follow the contracting policies and procedures in the Federal Acquisition Regulation (FAR), the policies and procedures regarding disposition of information technology excess personal property in the Federal Property Management Regulations (FPMR) (41 CFR 101-43.6), and the policies and procedures on exchange/sale contained in the FPMR (41 CFR part 101-46).

Tactronic’s www.tactronic.com Pg 15

TERMS AND CONDITIONS APPLICABLE TO REPAIR

SERVICE AND REPAIR PARTS/SPARE PARTS FOR GOVERNMENT-OWNED

GENERAL PURPOSE COMMERCIAL INFORMATION TECHNOLOGY

EQUIPMENT (AFTER EXPIRATION OF GUARANTEE/WARRANTY

PROVISIONS AND/OR WHEN REQUIRED SERVICE IS NOT COVERED

BY GUARANTEE/WARRANTY PROVISIONS) AND FOR LEASED EQUIPMENT

(SPECIAL ITEM NUMBER 132-12)

1. SERVICE AREAS

a. The repair service rates listed herein are applicable to any ordering activity location within a 100 mile radius of the Contractor's service points. If any additional charge is to apply because of the greater distance from the Contractor's service locations, the mileage rate or other distance factor shall be stated in paragraph 7.c.

b. When repair services cannot be performed at the ordering activity installation site, the repair services will be performed at the Contractor's plant(s) listed below:

381-12 Old Riverhead road, Westhampton Beach, NY 11978 or 704-B Festus Avenue, Fayetteville, NC 28303

The Contractor, without additional charge to the ordering activity, shall provide a hot line technical support number 1-800-927-6627for the purpose of providing user assistance and guidance in the implementation of the hardware.

The technical support number is available from 8am to 5pm Eastern Standard Time (EST). Technical support requirements outlined per contract.

2. REPAIR SERVICE AND REPAIR PARTS/SPARE PARTS ORDERS

a. Agencies may use written orders, EDI orders, credit card orders, blanket purchase agreements (BPAs), or small order procedures for ordering repair service and/or repair parts/spare parts under this contract. Orders for repair service shall not extend beyond the end of the contract period.

b. When repair service is ordered, only one chargeable repairman shall be dispatched to perform repair service, unless the ordering activity agrees, in advance, that additional repair personnel are required to effect repairs.

Service Policy

Non-Warranty Repairs

Non-warranty repairs done at Tactronics’ facility are on a time and materials basis. Tactronics will provide, if requested, an estimate of repair charges at a cost of $65.00 per hours, whether the equipment repaired or returned as received. Defective parts that have been replaced will be returned, if requested, at the time the equipment is returned. The Tactronics shop rate is $65.00 per hours, with a one-hour minimum. Repairs are completed on a first come, first serve basis. Equipment sent to Tactronics for repair must be sent freight pre-paid. Return shipping charges will be added to the final bill. Repaired equipment will be returned by the same shipping method that was used to send it to Tactronics unless otherwise requested.

Repairs are warranted for ninety (90) days from shipment date, and are limited to parts replaced by Tactronics.

Warranty Repairs

Equipment repaired by Tactronics will be returned by the same method as it was shipped to Tactronics. Any equipment that has been returned to Tactronics for warranty repair and is found working properly will be billed for a minimum of one hour of labor at a rate of $65.00, although the equipment may still be within the warranty period.

If a repaired unit is returned to the dealer and does not function properly, a Tactronics service manager should be notified immediately.

Tactronic’s www.tactronic.com Pg 16

Any claims submitted for repairs on equipment received from the Tactronics service department without specific authorization by the Tactronics service manager will not be honored.

RMA issued by Contractor

Call 1-800-927-6627 for the RMA number.

3. LOSS OR DAMAGE

When the Contractor removes equipment to his establishment for repairs, the Contractor shall be responsible for any damage or loss, from the time the equipment is removed from the ordering activity installation, until the equipment is returned to such installation.

4. SCOPE

a. Repair service and repair parts/spare parts shall apply exclusively to the equipment types/models within the scope of this Information Technology Schedule.

5. RESPONSIBILITIES OF THE ORDERING ACTIVITY

a. Ordering activity personnel shall not attempt repairs to equipment, unless agreed to by the Contractor.

b. Subject to security regulations, the ordering activity shall permit access to the equipment which is to be repaired.

6. RESPONSIBILITIES OF THE CONTRACTOR

For equipment not covered by a warranty, the Contractor's repair service personnel shall complete repairs as soon as possible after notification by the ordering activity that service is required. Within the service areas, this repair service should normally be done within 4 hours after notification.

7. REPAIR SERVICE RATE PROVISIONS

a. CHARGES. Charges for repair service will include the labor charge, computed at the rates set forth below, for the time during which repairmen are actually engaged in work, and, when applicable, the charge for travel or transportation.

b. MULTIPLE MACHINES. When repairs are ordered by a ordering activity on two or more machines located in one or more buildings within walking distance of each other, the charges will be computed from the time the repairman commences work on the first machine, until the work is completed on the last machine. The time required to go from one machine to another, or from one building to another, will be considered actual work performance, and chargeable to the ordering activity, provided the time consumed in going between machines (or buildings) is reasonable.

c. TRAVEL OR TRANSPORTATION

(1) AT THE CONTRACTOR'S SHOP

(a) When equipment is returned to the Contractor's shop for adjustments or repairs which are not covered by the guarantee/warranty provision, the cost of transportation, packing, etc., from the ordering activity location to the Contractor's plant, and return to the ordering activity location, shall be borne by the ordering activity.

(b) The ordering activity should not return defective equipment to the Contractor for adjustments and repairs or replacement without his prior consultation and instruction.

Tactronic’s www.tactronic.com Pg 17

(2) AT THE ORDERING ACTIVITY LOCATION (Within Established Service Areas)

When equipment is repaired at the ordering activity location, and repair service rates are established for service areas or zones, the listed rates are applicable to any ordering activity location within such service areas or zones. No extra charge, time, or expense will be allowed for travel or transportation of repairmen or machines to or from the ordering activity office; such overhead is included in the repair service rates listed.

(3) AT THE ORDERING ACTIVITY LOCATION (Outside Established Service Areas)

(a) The repair service rates listed for subparagraph (2) above apply, except that a travel charge of (in accordance with current per diem rate(s)) per mile for repairmen will apply to the round-trip distance between the geographic limits of the applicable service area and the ordering activity location. Such charge will apply as an additional charge, but it will be limited to one round trip for each request that is made by the ordering activity for repair service, regardless of whether repairs are performed at the ordering activity location or at the Contractor's shop.

(b) When the overall travel charge computed at the above mileage rate is unreasonable (considering the time required for travel, actual and necessary transportation costs, and the allowable ordering activity per diem rate for each night the repairman is required to remain overnight at the ordering activity location), the ordering activity shall have the option of reimbursing the Contractor for actual costs, provided that the actual costs are reasonable and allowable. The Contractor shall furnish the ordering activity with a report of travel performed and related expenses incurred. The report shall include departure and arrival dates, times, and the applicable mode of travel.

d. LABOR RATES

(1) REGULAR HOURS

The Regular Hours repair service rates listed herein shall entitle the ordering activity to repair service during the period 8:00 a.m. to 5:00 p.m., Monday through Friday, exclusive of holidays observed at the ordering activity location. There shall be no additional charge for repair service which was requested during Regular Hours, but performed outside the Regular Hours defined above, at the convenience of the Contractor.

REPAIR SERVICE RATES

REGULAR

MINIMUM HOURS

LOCATION CHARGE* PER HOUR**

CONTRACTOR'S SHOP $64.84 $64.84

ORDERING ACTIVITY LOCATION

(WITHIN ESTABLISHED

SERVICE AREAS) $64.84 $64.84

ORDERING ACTIVITY LOCATION

(OUTSIDE ESTABLISHED

SERVICE AREAS) $64.84* $64.84*

*MINIMUM CHARGES INCLUDE __1__ FULL HOURS ON THE JOB.

**FRACTIONAL HOURS, AT THE END OF THE JOB, WILL BE PRORATED TO THE NEAREST QUARTER

HOUR.

Tactronic’s www.tactronic.com Pg 18

8. REPAIR PARTS/SPARE PARTS RATE PROVISIONS

All parts, furnished as spares or as repair parts in connection with the repair of equipment, unless otherwise indicated in this pricelist, shall be new, standard parts manufactured by the equipment manufacturer. All parts shall be furnished at prices indicated in the current Contractor's commercial pricelist, at a discount of 2% from such listed prices.

9. GUARANTEE/WARRANTY—REPAIR SERVICE AND REPAIR PARTS/SPARE PARTS

a. REPAIR SERVICE

All repair work will be guaranteed/warranted for a period of 1 year parts and labor and 2 years parts thereafter, unless an extended warranty has been purchased.

b. REPAIR PARTS/SPARE PARTS

All parts, furnished either as spares or repairs parts will be guaranteed/warranted for a period of 1 year parts and labor and 2 years parts thereafter, unless an extended warranty has been purchased.

10. INVOICES AND PAYMENTS

a. Repair Service and Repair Parts/Spare Parts

Invoices for repair service and parts shall be submitted by the Contractor as soon as possible after completion of work. Payment under blanket purchase agreements will be made quarterly or monthly, except where cash payment procedures are used. Invoices shall be submitted separately to each ordering activity office ordering services under the contract. The cost of repair parts shall be shown as a separate item on the invoice, and shall be priced in accordance with paragraph #7d, above. PROMPT PAYMENT DISCOUNT, IF APPLICABLE, SHALL BE

SHOWN ON THE INVOICE.

Tactronic’s www.tactronic.com Pg 19

TERMS AND CONDITIONS APPLICABLE TO INFORMATION TECHNOLOGY (IT)

PROFESSIONAL SERVICES (SPECIAL ITEM NUMBER 132-51)

1. SCOPE

a. The prices, terms and conditions stated under Special Item Number 132-51 Information Technology Professional Services apply exclusively to IT Services within the scope of this Information Technology Schedule.

b. The Contractor shall provide services at the Contractor’s facility and/or at the ordering activity location, as agreed to by the Contractor and the ordering activity.

2. PERFORMANCE INCENTIVES

a. Performance incentives may be agreed upon between the Contractor and the ordering activity on individual fixed price orders or Blanket Purchase Agreements under this contract in accordance with this clause.

b. The ordering activity must establish a maximum performance incentive price for these services and/or total solutions on individual orders or Blanket Purchase Agreements.

c. Incentives should be designed to relate results achieved by the contractor to specified targets. To the maximum extent practicable, ordering activities shall consider establishing incentives where performance is critical to the ordering activity’s mission and incentives are likely to motivate the contractor. Incentives shall be based on objectively measurable tasks.

3. ORDERING PROCEDURES FOR SERVICES (REQUIRING A STATEMENT OF WORK)

(G-FCI-920) (MAR 2003)

FAR 8.402 contemplates that GSA may occasionally find it necessary to establish special ordering procedures for individual Federal Supply Schedules or for some Special Item Numbers (SINs) within a Schedule. GSA has established special ordering procedures for services that require a Statement of Work. These special ordering procedures take precedence over the procedures in FAR 8.404 (b)(2) through (b)(3).

When ordering services over $100,000, Department of Defense (DOD) ordering offices and non-DOD agencies placing orders on behalf of the DOD must follow the policies and procedures in the Defense Federal Acquisition Regulation Supplement (DFARS) 208.404-70 – Additional ordering procedures for services. When DFARS 208.404-70 is applicable and there is a conflict between the ordering procedures contained in this clause and the additional ordering procedures for services in DFARS 208.404-70, the DFARS procedures take precedence.

GSA has determined that the prices for services contained in the contractor’s price list applicable to this Schedule are fair and reasonable. However, the ordering activity using this contract is responsible for considering the level of effort and mix of labor proposed to perform a specific task being ordered and for making a determination that the total firm-fixed price or ceiling price is fair and reasonable.

(a) When ordering services, ordering activities shall—

(1) Prepare a Request (Request for Quote or other communication tool):

(i) A statement of work (a performance-based statement of work is preferred) that outlines, at a minimum, the work to be performed, location of work, period of performance, deliverable schedule, applicable standards, acceptance criteria, and any special requirements (i.e., security clearances, travel, special knowledge, etc.) should be prepared.

Tactronic’s www.tactronic.com Pg 20

(ii) The request should include the statement of work and request the contractors to submit either a firm-fixed price or a ceiling price to provide the services outlined in the statement of work. A firm-fixed price order shall be requested, unless the ordering activity makes a determination that it is not possible at the time of placing the order to estimate accurately the extent or duration of the work or to anticipate cost with any reasonable degree of confidence.

When such a determination is made, a labor hour or time-and-materials proposal may be requested. The firm-fixed price shall be based on the rates in the schedule contract and shall consider the mix of labor categories and level of effort required to perform the services described in the statement of work. The firm-fixed price of the order should also include any travel costs or other incidental costs related to performance of the services ordered, unless the order provides for reimbursement of travel costs at the rates provided in the Federal Travel or Joint Travel Regulations. A ceiling price must be established for labor-hour and time-and-materials orders.

(iii) The request may ask the contractors, if necessary or appropriate, to submit a project plan for performing the task, and information on the contractor’s experience and/or past performance performing similar tasks.

(iv) The request shall notify the…