MAS - Advanced Computer Concepts Inc. - GS35F0202N

GSA Product List

Contract Number

GS-35F-0202N

Valid through December 22, 2022

Valid through Modification #: PS-0195

Date: 06/15/2022

Advanced Computer Concepts

Page 2 4/10/2013

Table of Contents

INFORMATION FOR ORDERING ACTIVITIES APPLICABLE TO ALL SPECIAL ITEM NUMBERS 4

1. GEOGRAPHIC SCOPE OF CONTRACT:

2. CONTRACTOR’S ORDERING ADDRESS AND PAYMENT INFORMATION:

3. LIABILITY FOR INJURY OR DAMAGE

4. STATISTICAL DATA FOR GOVERNMENT ORDERING OFFICE COMPLETION OF

STANDARD FORM 279:

5. FOB

6. DELIVERY SCHEDULE

7. DISCOUNTS

8. TRADE AGREEMENTS ACT OF 1979, as amended:

9. STATEMENT CONCERNING AVAILABILITY OF EXPORT PACKING:

10. Small Requirements

11. MAXIMUM ORDER

12. ORDERING PROCEDURES FOR FEDERAL SUPPLY SCHEDULE CONTRACTS

13. FEDERAL INFORMATION TECHNOLOGY/TELECOMMUNICATION STANDARDS

REQUIREMENTS

14. CONTRACTOR TASKS / SPECIAL REQUIREMENTS (C-FSS-370) (NOV 2003)

15. CONTRACT ADMINISTRATION FOR ORDERING ACTIVITIES

16. GSA ADVANTAGE!

17. PURCHASE OF OPEN MARKET ITEMS

18. CONTRACTOR COMMITMENTS, WARRANTIES AND REPRESENTATIONS

19. OVERSEAS ACTIVITIES

20. BLANKET PURCHASE AGREEMENTS (BPAs)

21. CONTRACTOR TEAM ARRANGEMENTS

22. INSTALLATION, DEINSTALLATION, REINSTALLATION

23. SECTION 508 COMPLIANCE

24. PRIME CONTRACTOR ORDERING FROM FEDERAL SUPPLY SCHEDULES

25. INSURANCE—WORK ON A GOVERNMENT INSTALLATION (JAN 1997)(FAR 52.228-5)

26. SOFTWARE INTEROPERABILITY

27. ADVANCE PAYMENTS

TERMS AND CONDITIONS APPLICABLE TO PURCHASE OF GENERAL PURPOSE

COMMERCIAL INFORMATION TECHNOLOGY NEW EQUIPMENT (SPECIAL ITEM NUMBER

132-8)

1. MATERIAL AND WORKMANSHIP

2. ORDER

3. TRANSPORTATION OF EQUIPMENT

4. INSTALLATION AND TECHNICAL SERVICES

5. INSPECTION/ACCEPTANCE

6. WARRANTY

7. PURCHASE PRICE FOR ORDERED EQUIPMENT

8. RESPONSIBILITIES OF THE CONTRACTOR

9. TRADE-IN OF INFORMATION TECHNOLOGY EQUIPMENT

TERMS AND CONDITIONS APPLICABLE TO MAINTENANCE, REPAIR SERVICE AND REPAIR

PARTS/SPARE PARTS FOR GOVERNMENT-OWNED GENERAL PURPOSE COMMERCIAL

INFORMATION TECHNOLOGY EQUIPMENT, RADIO/TELEPHONE EQUIPMENT, (AFTER

EXPIRATION OF GUARANTEE/WARRANTY PROVISIONS AND/OR WHEN REQUIRED SERVICE

IS NOT COVERED BY GUARANTEE/WARRANTY PROVISIONS) AND FOR LEASED

EQUIPMENT (SPECIAL ITEM NUMBER 132-12)

1. SERVICE AREAS

2. MAINTENANCE ORDER

3. REPAIR SERVICE AND REPAIR PARTS/SPARE PARTS ORDERS

Page 3 4/10/2013

4. LOSS OR DAMAGE

5. SCOPE

6. RESPONSIBILITIES OF THE ORDERING ACTIVITY

7. RESPONSIBILITIES OF THE CONTRACTOR

8. MAINTENANCE RATE PROVISIONS

9. REPAIR SERVICE RATE PROVISIONS

10. REPAIR PARTS/SPARE PARTS RATE PROVISIONS

11. GUARANTEE/WARRANTY—REPAIR SERVICE AND REPAIR PARTS/SPARE PARTS .20

12. INVOICES AND PAYMENTS

TERMS AND CONDITIONS APPLICABLE TO TERM SOFTWARE LICENSES (SPECIAL ITEM

NUMBER 132-32), PERPETUAL SOFTWARE LICENSES (SPECIAL ITEM NUMBER 132-33) AND

MAINTENANCE AS A SERVICE (SPECIAL ITEM NUMBER 132-34) OF GENERAL PURPOSE

COMMERCIAL INFORMATION TECHNOLOGY SOFTWARE

1. INSPECTION/ACCEPTANCE

2. GUARANTEE/WARRANTY

3. TECHNICAL SERVICES

4. SOFTWARE MAINTENANCE

5. PERIODS OF TERM LICENSES (SIN 132 32) AND MAINTENANCE (SIN 132 34)

6. CONVERSION FROM TERM LICENSE TO PERPETUAL LICENSE

7. TERM LICENSE CESSATION

8. UTILIZATION LIMITATIONS (SIN 132 32, SIN 132 33, AND SIN 132 34)

9. SOFTWARE CONVERSIONS (SIN 132 32 AND SIN 132 33)

10. DESCRIPTIONS AND EQUIPMENT COMPATIBILITY

11. RIGHT TO COPY PRICING

USA COMMITMENT TO PROMOTE

SMALL BUSINESS PARTICIPATION

PROCUREMENT PROGRAMS

PREAMBLE

COMMITMENT

BEST VALUE

BLANKET PURCHASE AGREEMENT

FEDERAL SUPPLY SCHEDULE

BASIC GUIDELINES FOR USING

“CONTRACTOR TEAM ARRANGEMENTS”

GSA Price List

Page 4 4/10/2013

INFORMATION FOR ORDERING ACTIVITIES

APPLICABLE TO ALL SPECIAL ITEM NUMBERS

1. GEOGRAPHIC SCOPE OF CONTRACT:

Domestic delivery is delivery within the 48 contiguous states, Alaska, Hawaii, Puerto Rico, Washington, DC, and U.S. Territories. Domestic delivery also includes a port or consolidation point, within the aforementioned areas, for orders received from overseas activities.

Overseas delivery is delivery to points outside of the 48 contiguous states, Washington, DC, Alaska, Hawaii, Puerto Rico, and U.S. Territories.

Offerors are requested to check one of the following boxes:

[ ] The Geographic Scope of Contract will be domestic and overseas delivery.

[ ] The Geographic Scope of Contract will be overseas delivery only.

[X ] The Geographic Scope of Contract will be domestic delivery only.

2. CONTRACTOR’S ORDERING ADDRESS AND PAYMENT INFORMATION:

Advanced Computer Concepts 7927 Jones Branch Drive, Suite 600 N Mclean, VA 22102

Contractor must accept the credit card for payments equal to or less than the micro-purchase for oral or written orders under this contract. The Contractor and the ordering agency may agree to use the credit card for dollar amounts over the micro-purchase threshold (See GSAR 552.232-79 Payment by Credit Card). In addition, bank account information for wire transfer payments will be shown on the invoice.

The following telephone number(s) can be used by ordering activities to obtain technical and/or ordering assistance:

(571) 395-4174

(571) 395-4157

3. LIABILITY FOR INJURY OR DAMAGE

The Contractor shall not be liable for any injury to ordering activity personnel or damage to ordering activity property arising from the use of equipment maintained by the Contractor, unless such injury or damage is due to the fault or negligence of the Contractor.

4. STATISTICAL DATA FOR GOVERNMENT ORDERING OFFICE COMPLETION OF STANDARD

FORM 279:

Block 9: G. Order/Modification Under Federal Schedule Contract Block 16: Data Universal Numbering System (DUNS) Number: 116193400 Block 30: Type of Contractor: Other Small Business Block 31: Woman-Owned Small Business - Yes Block 37: Contractor's Taxpayer Identification Number (TIN): 54-1287667

Page 5 4/10/2013

Block 40: Veteran Owned Small Business (VOSB): No 4a. CAGE Code: 0L850 4b. Contractor has registered with the Central Contractor Registration Database.

5. FOB

DESTINATION

6. DELIVERY SCHEDULE

a. TIME OF DELIVERY: The Contractor shall deliver to destination within the number of calendar days after receipt of order (ARO), as set forth below:

SPECIAL ITEM NUMBER DELIVERY TIME (Days ARO) 132-8 15 Days 132-12 15 Days 132-33 15 Days 132-34 15 Days

b. URGENT REQUIREMENTS: When the Federal Supply Schedule contract delivery period does not meet the bona fide urgent delivery requirements of an ordering activity, ordering activities are encouraged, if time permits, to contact the Contractor for the purpose of obtaining accelerated delivery. The Contractor shall reply to the inquiry within 3 workdays after receipt. (Telephonic replies shall be confirmed by the Contractor in writing.) If the Contractor offers an accelerated delivery time acceptable to the ordering activity, any order(s) placed pursuant to the agreed upon accelerated delivery time frame shall be delivered within this shorter delivery time and in accordance with all other terms and conditions of the contract.

c. i. SIN 132-54 and SIN 132-55, ACCELERATED SERVICE DELIVERY (7 calendar days or less): the time required for COMSATCOM services to be available after order award. Under Accelerated Service Task Orders, service acceptance testing, unless otherwise required by the satellite provider or host nation, shall be deferred until Ordering Activity operations permit.

ii. SIN 132-54 and SIN 132-55, TIME-CRITICAL DELIVERY (4 hours or less):

the time required for COMSATCOM services to be available after order award.

Under Time-Critical Task Orders, service acceptance testing unless otherwise required by the satellite provider or host nation shall be deferred until Ordering Activity operations permit. Time-Critical Delivery shall be predicated on the availability of COMSATCOM transponded capacity (contracted bandwidth and power, pre-arranged Host Nation Agreements, frequency clearance) or COMSATCOM subscription services (bandwidth, terminals, network resources, etc.).

iii. For SIN 132-54 and SIN 132-55, EXTENDED SERVICE DELIVERY TIMES:

the time required under extenuating circumstances for COMSATCOM services to be available after order award. Such extenuating circumstances may include extended time required for host nation agreements or landing rights, or other time intensive service delivery requirements as defined in the individual

Page 6 4/10/2013 requirement. Any such extended delivery times will be negotiated between the Ordering Activity and Contractor.

7. DISCOUNTS

Prices shown are NET Prices; Basic Discounts have been deducted.

8. TRADE AGREEMENTS ACT OF 1979, as amended:

All items are U.S. made end products, designated country end products, Caribbean Basin country end products, Canadian end products, or Mexican end products as defined in the Trade Agreements Act of 1979, as amended.

9. STATEMENT CONCERNING AVAILABILITY OF EXPORT PACKING:

Export packing is available for an additional fee outside of the scope of this contract.

10. Small Requirements

The minimum dollar value of orders to be issued is $ 100.00

11. MAXIMUM ORDER

(All dollar amounts are exclusive of any discount for prompt payment.)

a. The Maximum Order value for the following Special Item Numbers (SINs) is

$500,000:

Special Item Number 132-8 - Purchase of Equipment Special Item Number 132-12 - Equipment Maintenance Special Item Number 132-32 - Term Software Licenses Special Item Number 132-33 - Perpetual Software Licenses Special Item Number 132-34 - Maintenance of Software as a Service

12. ORDERING PROCEDURES FOR FEDERAL SUPPLY SCHEDULE CONTRACTS

Ordering activities shall use the ordering procedures of Federal Acquisition Regulation (FAR)

8.405 when placing an order or establishing a BPA for supplies or services. These procedures apply to all schedules.

a. FAR 8.405-1 Ordering procedures for supplies, and services not requiring a statement of work.

b. FAR 8.405-2 Ordering procedures for services requiring a statement of work.

13. FEDERAL INFORMATION TECHNOLOGY/TELECOMMUNICATION STANDARDS

REQUIREMENTS

Ordering activities acquiring products from this Schedule must comply with the provisions of the Federal Standards Program, as appropriate (reference: NIST Federal Standards Index). Inquiries to determine whether or not specific products listed herein comply with Federal Information Processing Standards (FIPS) or Federal Telecommunication Standards (FED-STDS), which are cited by ordering activities, shall be responded to promptly by the Contractor.

13.1 FEDERAL INFORMATION PROCESSING STANDARDS PUBLICATIONS (FIPS PUBS)

Information Technology products under this Schedule that do not conform to Federal Information Processing Standards (FIPS) should not be acquired unless a waiver has

Page 7 4/10/2013 been granted in accordance with the applicable "FIPS Publication." Federal Information Processing Standards Publications (FIPS PUBS) are issued by the U.S. Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security Act. Information concerning their availability and applicability should be obtained from the National Technical Information Service (NTIS), 5285 Port Royal Road, Springfield, Virginia 22161. FIPS PUBS include voluntary standards when these are adopted for Federal use. Individual orders for FIPS PUBS should be referred to the NTIS Sales Office, and orders for subscription service should be referred to the NTIS Subscription Officer, both at the above address, or telephone number (703) 487-4650.

13.2 FEDERAL TELECOMMUNICATION STANDARDS (FED-STDS): Telecommunication products under this Schedule that do not conform to Federal Telecommunication Standards (FED-STDS) should not be acquired unless a waiver has been granted in accordance with the applicable "FED-STD." Federal Telecommunication Standards are issued by the U.S. Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security Act. Ordering information and information concerning the availability of FED-STDS should be obtained from the GSA, Federal Acquisition Service, Specification Section, 470 East L’Enfant Plaza, Suite 8100, SW, Washington, DC 20407, telephone number (202)619-8925. Please include a self-addressed mailing label when requesting information by mail. Information concerning their applicability can be obtained by writing or calling the U.S. Department of Commerce, National Institute of Standards and Technology, Gaithersburg, MD 20899, telephone number (301)975-2833.

14. CONTRACTOR TASKS / SPECIAL REQUIREMENTS (C-FSS-370) (NOV 2003)

(a) Security Clearances: The Contractor may be required to obtain/possess varying levels of security clearances in the performance of orders issued under this contract. All costs associated with obtaining/possessing such security clearances should be factored into the price offered under the Multiple Award Schedule.

(b) Travel: The Contractor may be required to travel in performance of orders issued under this contract. Allowable travel and per diem charges are governed by Pub .L. 99-234 and FAR Part 31, and are reimbursable by the ordering agency or can be priced as a fixed price item on orders placed under the Multiple Award Schedule. Travel in performance of a task order will only be reimbursable to the extent authorized by the ordering agency. The Industrial Funding Fee does NOT apply to travel and per diem charges.

(c) Certifications, Licenses and Accreditations: As a commercial practice, the Contractor may be required to obtain/possess any variety of certifications, licenses and accreditations for specific FSC/service code classifications offered. All costs associated with obtaining/ possessing such certifications, licenses and accreditations should be factored into the price offered under the Multiple Award Schedule program.

(d) Insurance: As a commercial practice, the Contractor may be required to obtain/possess insurance coverage for specific FSC/service code classifications offered.

All costs associated with obtaining/possessing such insurance should be factored into the price offered under the Multiple Award Schedule program.

Page 8 4/10/2013

(e) Personnel: The Contractor may be required to provide key personnel, resumes or skill category descriptions in the performance of orders issued under this contract.

Ordering activities may require agency approval of additions or replacements to key personnel.

(f) Organizational Conflicts of Interest: Where there may be an organizational conflict of interest as determined by the ordering agency, the Contractor’s participation in such order may be restricted in accordance with FAR Part 9.5.

(g) Documentation/Standards: The Contractor may be requested to provide products or services in accordance with rules, regulations, OMB orders, standards and documentation as specified by the agency’s order.

(h) Data/Deliverable Requirements: Any required data/deliverables at the ordering level will be as specified or negotiated in the agency’s order.

(i) Government-Furnished Property: As specified by the agency’s order, the Government may provide property, equipment, materials or resources as necessary.

(j) Availability of Funds: Many Government agencies’ operating funds are appropriated for a specific fiscal year. Funds may not be presently available for any orders placed under the contract or any option year. The Government’s obligation on orders placed under this contract is contingent upon the availability of appropriated funds from which payment for ordering purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are available to the ordering Contracting Officer.

(k) Overtime: For professional services, the labor rates in the Schedule should not vary by virtue of the Contractor having worked overtime. For services applicable to the Service Contract Act (as identified in the Schedule), the labor rates in the Schedule will vary as governed by labor laws (usually assessed a time and a half of the labor rate).

15. CONTRACT ADMINISTRATION FOR ORDERING ACTIVITIES

Any ordering activity, with respect to any one or more delivery orders placed by it under this contract, may exercise the same rights of termination as might the GSA Contracting Officer under provisions of FAR 52.212-4, paragraphs (l) Termination for the ordering activity’s convenience, and (m) Termination for Cause (See 52.212-4)

16. GSA ADVANTAGE!

GSA Advantage! is an on-line, interactive electronic information and ordering system that provides on-line access to vendors' schedule prices with ordering information. GSA Advantage! will allow the user to perform various searches across all contracts including, but not limited to:

(1) Manufacturer;

(2) Manufacturer's Part Number; and

(3) Product categories.

Agencies can browse GSA Advantage! by accessing the Internet World Wide Web utilizing a browser (ex.: NetScape). The Internet address is http://www.gsaadvantage.gov

17. PURCHASE OF OPEN MARKET ITEMS

NOTE: Open Market Items are also known as incidental items, noncontract items, non- Schedule items, and items not on a Federal Supply Schedule contract. ODCs (Other

Page 9 4/10/2013

Direct Costs) are not part of this contract and should be treated as open market purchases. Ordering Activities procuring open market items must follow FAR 8.402(f).

For administrative convenience, an ordering activity contracting officer may add items not on the Federal Supply Multiple Award Schedule (MAS) -- referred to as open market items -- to a Federal Supply Schedule blanket purchase agreement (BPA) or an individual task or delivery order, only if-

(1) All applicable acquisition regulations pertaining to the purchase of the items not on the Federal Supply Schedule have been followed (e.g., publicizing (Part 5), competition requirements (Part 6), acquisition of commercial items (Part 12), contracting methods (Parts 13, 14, and 15), and small business programs (Part 19));

(2) The ordering activity contracting officer has determined the price for the items not on the Federal Supply Schedule is fair and reasonable;

(3) The items are clearly labeled on the order as items not on the Federal Supply Schedule; and

(4) All clauses applicable to items not on the Federal Supply Schedule are included in the order.

18. CONTRACTOR COMMITMENTS, WARRANTIES AND REPRESENTATIONS

a. For the purpose of this contract, commitments, warranties and representations include, in addition to those agreed to for the entire schedule contract:

(1) Time of delivery/installation quotations for individual orders;

(2) Technical representations and/or warranties of products concerning performance, total system performance and/or configuration, physical, design and/or functional characteristics and capabilities of a product/equipment/ service/software package submitted in response to requirements which result in orders under this schedule contract.

(3) Any representations and/or warranties concerning the products made in any literature, description, drawings and/or specifications furnished by the Contractor.

b. The above is not intended to encompass items not currently covered by the GSA Schedule contract.

19. OVERSEAS ACTIVITIES

The terms and conditions of this contract shall apply to all orders for installation, maintenance and repair of equipment in areas listed in the pricelist outside the 48 contiguous states and the District of Columbia, except as indicated below:

Upon request of the Contractor, the ordering activity may provide the Contractor with logistics support, as available, in accordance with all applicable ordering activity regulations. Such ordering activity support will be provided on a reimbursable basis, and will only be provided to the Contractor's technical personnel whose services are exclusively required for the fulfillment of the terms and conditions of this contract.

20. BLANKET PURCHASE AGREEMENTS (BPAs) The use of BPAs under any schedule contract to fill repetitive needs for supplies or services is allowable. BPAs may be established with one or more schedule contractors. The number of

Page 10 4/10/2013

BPAs to be established is within the discretion of the ordering activity establishing the BPA and should be based on a strategy that is expected to maximize the effectiveness of the BPA(s).

Ordering activities shall follow FAR 8.405-3 when creating and implementing BPA(s).

21. CONTRACTOR TEAM ARRANGEMENTS

Contractors participating in contractor team arrangements must abide by all terms and conditions of their respective contracts. This includes compliance with Clauses 552.238-74, Industrial Funding Fee and Sales Reporting, i.e., each contractor (team member) must report sales and remit the IFF for all products and services provided under its individual contract.

22. INSTALLATION, DEINSTALLATION, REINSTALLATION

The Davis-Bacon Act (40 U.S.C. 276a-276a-7) provides that contracts in excess of $2,000 to which the United States or the District of Columbia is a party for construction, alteration, or repair (including painting and decorating) of public buildings or public works with the United States, shall contain a clause that no laborer or mechanic employed directly upon the site of the work shall received less than the prevailing wage rates as determined by the Secretary of Labor.

The requirements of the Davis-Bacon Act do not apply if the construction work is incidental to the furnishing of supplies, equipment, or services. For example, the requirements do not apply to simple installation or alteration of a public building or public work that is incidental to furnishing supplies or equipment under a supply contract. However, if the construction, alteration or repair is segregable and exceeds $2,000, then the requirements of the Davis-Bacon Act applies.

The ordering activity issuing the task order against this contract will be responsible for proper administration and enforcement of the Federal labor standards covered by the Davis-Bacon Act.

The proper Davis-Bacon wage determination will be issued by the ordering activity at the time a request for quotations is made for applicable construction classified installation, deinstallation, and reinstallation services under SIN 132-8 or 132-9.

23. SECTION 508 COMPLIANCE.

If applicable, Section 508 compliance information on the supplies and services in this contract are available in Electronic and Information Technology (EIT) at the following:

The EIT standard can be found at: www.Section508.gov/.

24. PRIME CONTRACTOR ORDERING FROM FEDERAL SUPPLY SCHEDULES.

Prime Contractors (on cost reimbursement contracts) placing orders under Federal Supply Schedules, on behalf of an ordering activity, shall follow the terms of the applicable schedule and authorization and include with each order –

(a) A copy of the authorization from the ordering activity with whom the contractor has the prime contract (unless a copy was previously furnished to the Federal Supply Schedule contractor); and

(b) The following statement:

This order is placed under written authorization from _______ dated _______. In the event of any inconsistency between the terms and conditions of this order and those of your Federal Supply Schedule contract, the latter will govern.

http://www.section508.gov/

Page 11 4/10/2013

25. INSURANCE—WORK ON A GOVERNMENT INSTALLATION (JAN 1997)(FAR 52.228-5)

(a) The Contractor shall, at its own expense, provide and maintain during the entire performance of this contract, at least the kinds and minimum amounts of insurance required in the Schedule or elsewhere in the contract.

(b) Before commencing work under this contract, the Contractor shall notify the Contracting Officer in writing that the required insurance has been obtained. The policies evidencing required insurance shall contain an endorsement to the effect that any cancellation or any material change adversely affecting the Government's interest shall not be effective—

(1) For such period as the laws of the State in which this contract is to be performed prescribe; or

(2) Until 30 days after the insurer or the Contractor gives written notice to the Contracting Officer, whichever period is longer.

(c) The Contractor shall insert the substance of this clause, including this paragraph (c), in subcontracts under this contract that require work on a Government installation and shall require subcontractors to provide and maintain the insurance required in the Schedule or elsewhere in the contract. The Contractor shall maintain a copy of all subcontractors' proofs of required insurance, and shall make copies available to the Contracting Officer upon request.

26. SOFTWARE INTEROPERABILITY.

Offerors are encouraged to identify within their software items any component interfaces that support open standard interoperability. An item’s interface may be identified as interoperable on the basis of participation in a Government agency-sponsored program or in an independent organization program. Interfaces may be identified by reference to an interface registered in the component registry located at http://www.core.gov.

27. ADVANCE PAYMENTS

A payment under this contract to provide a service or deliver an article for the United States Government may not be more than the value of the service already provided or the article already delivered. Advance or pre-payment is not authorized or allowed under this contract. (31 U.S.C. 3324)

Page 12 4/10/2013

TERMS AND CONDITIONS APPLICABLE TO PURCHASE OF GENERAL PURPOSE COMMERCIAL

INFORMATION TECHNOLOGY NEW EQUIPMENT (SPECIAL ITEM NUMBER 132-8)

1. MATERIAL AND WORKMANSHIP

All equipment furnished hereunder must satisfactorily perform the function for which it is intended.

2. ORDER

Written orders, EDI orders (GSA Advantage! and FACNET), credit card orders, and orders placed under blanket purchase agreements (BPA) agreements shall be the basis for purchase in accordance with the provisions of this contract. If time of delivery extends beyond the expiration date of the contract, the Contractor will be obligated to meet the delivery and installation date specified in the original order.

For credit card orders and BPAs, telephone orders are permissible.

3. TRANSPORTATION OF EQUIPMENT

FOB DESTINATION. Prices cover equipment delivery to destination, for any location within the geographic scope of this contract.

4. INSTALLATION AND TECHNICAL SERVICES

a. INSTALLATION. When the equipment provided under this contract is not normally self-installable, the Contractor's technical personnel shall be available to the ordering activity, at the ordering activity's location, to install the equipment and to train ordering activity personnel in the use and maintenance of the equipment. The charges, if any, for such services are listed below, or in the price schedule:

On site installation is available at a reduce rate of $75.00 per hour plus travel expenses.

b. INSTALLATION, DEINSTALLATION, REINSTALLATION. The Davis-Bacon Act (40 U.S.C. 276a-276a-7) provides that contracts in excess of $2,000 to which the United States or the District of Columbia is a party for construction, alteration, or repair (including painting and decorating) of public buildings or public works with the United States, shall contain a clause that no laborer or mechanic employed directly upon the site of the work shall received less than the prevailing wage rates as determined by the Secretary of Labor. The requirements of the Davis-Bacon Act do not apply if the construction work is incidental to the furnishing of supplies, equipment, or services. For example, the requirements do not apply to simple installation or alteration of a public building or public work that is incidental to furnishing supplies or equipment under a supply contract. However, if the construction, alteration or repair is segregable and exceeds $2,000, then the requirements of the Davis-Bacon Act applies.

The ordering activity issuing the task order against this contract will be responsible for proper administration and enforcement of the Federal labor standards covered by the Davis-Bacon Act. The proper Davis-Bacon wage determination will be issued by the ordering activity at the time a request for quotations is made for applicable construction classified installation, deinstallation, and reinstallation services under SIN 132-8 or SIN 132-9.

Page 13 4/10/2013

c. OPERATING AND MAINTENANCE MANUALS. The Contractor shall furnish the ordering activity with one (1) copy of all operating and maintenance manuals which are normally provided with the equipment being purchased.

5. INSPECTION/ACCEPTANCE

The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The ordering activity reserves the right to inspect or test any equipment that has been tendered for acceptance. The ordering activity may require repair or replacement of nonconforming equipment at no increase in contract price. The ordering activity must exercise its postacceptance rights (1) within a reasonable time after the defect was discovered or should have been discovered; and (2) before any substantial change occurs in the condition of the item, unless the change is due to the defect in the item.

6. WARRANTY

a. Unless specified otherwise in this contract, the Contractor’s standard commercial warranty as stated in the contract’s commercial pricelist will apply to this contract.

b. The Contractor warrants and implies that the items delivered hereunder are merchantable and fit for use for the particular purpose described in this contract.

c. Limitation of Liability. Except as otherwise provided by an express or implied warranty, the Contractor will not be liable to the ordering activity for consequential damages resulting from any defect or deficiencies in accepted items.

d. If inspection and repair of defective equipment under this warranty will be performed at the Contractor's plant, the address is as follows:

7927 Jones Branch Drive

Mclean, VA 22102

7. PURCHASE PRICE FOR ORDERED EQUIPMENT

The purchase price that the ordering activity will be charged will be the ordering activity purchase price in effect at the time of order placement, or the ordering activity purchase price in effect on the installation date (or delivery date when installation is not applicable), whichever is less.

8. RESPONSIBILITIES OF THE CONTRACTOR

The Contractor shall comply with all laws, ordinances, and regulations (Federal, State, City or otherwise) covering work of this character, and shall include all costs, if any, of such compliance in the prices quoted in this offer.

9. TRADE-IN OF INFORMATION TECHNOLOGY EQUIPMENT

When an ordering activity determines that Information Technology equipment will be replaced, the ordering activity shall follow the contracting policies and procedures in the Federal Acquisition Regulation (FAR), the policies and procedures regarding disposition of information

Page 14 4/10/2013 technology excess personal property in the Federal Property Management Regulations (FPMR) (41 CFR 101-43.6), and the policies and procedures on exchange/sale contained in the FPMR (41 CFR part 101-46).

Page 15 4/10/2013

TERMS AND CONDITIONS APPLICABLE TO MAINTENANCE, REPAIR SERVICE AND REPAIR

PARTS/SPARE PARTS FOR GOVERNMENT-OWNED GENERAL PURPOSE COMMERCIAL

INFORMATION TECHNOLOGY EQUIPMENT, RADIO/TELEPHONE EQUIPMENT, (AFTER

EXPIRATION OF GUARANTEE/WARRANTY PROVISIONS AND/OR WHEN REQUIRED SERVICE IS

NOT COVERED BY GUARANTEE/WARRANTY PROVISIONS) AND FOR LEASED EQUIPMENT

(SPECIAL ITEM NUMBER 132-12)

1. SERVICE AREAS

a. The maintenance and repair service rates listed herein are applicable to any ordering activity location within a 50 mile radius of the Contractor’s service points. If any additional charge is to apply because of the greater distance from the Contractor’s service locations, the mileage rate or other distance factor shall be negotiated at the Task Order level.

b. When repair services cannot be performed at the ordering activity installation site, the repair services will be performed at the Contractor's plant(s) listed below:

7927 Jones Branch Drive Mclean, VA 22102

2. MAINTENANCE ORDER

a. Agencies may use written orders, EDI orders, credit card orders, or BPAs, for ordering maintenance under this contract. The Contractor shall confirm orders within fifteen (15) calendar days from the date of receipt, except that confirmation of orders shall be considered automatic for renewals for maintenance (Special Item Number 132-12). Automatic acceptance of order renewals for maintenance service shall apply for machines which may have been discontinued from use for temporary periods of time not longer than 120 calendar days. If the order is not confirmed by the Contractor as prescribed by this paragraph, the order shall be considered to be confirmed by the Contractor.

b. The Contractor shall honor orders for maintenance for the duration of the contract period or a lessor period of time, for the equipment shown in the pricelist. Maintenance service shall commence on a mutually agreed upon date, which will be written into the maintenance order. Maintenance orders shall not be made effective before the expiration of any applicable maintenance and parts guarantee/warranty period associated with the purchase of equipment.

Orders for maintenance service shall not extend beyond the end of the contract period.

c. Maintenance may be discontinued by the ordering activity on thirty (30) calendar days written notice, or shorter notice when agreed to by the Contractor; such notice to become effective thirty (30) calendar days from the date on the notification. However, the ordering activity may extend the original discontinuance date upon written notice to the Contractor, provided that such notice is furnished at least ten (10) calendar days prior to the original discontinuance date.

Page 16 4/10/2013

d. Annual Funding. When annually appropriated funds are cited on a maintenance order, the period of maintenance shall automatically expire on September 30th of the contract period, or at the end of the contract period, whichever occurs first. Renewal of a maintenance order citing the new appropriation shall be required, if maintenance is to continue during any remainder of the contract period.

e. Cross-year Funding Within Contract Period. Where an ordering activity's specific appropriation authority provides for funds in excess of a 12 month, fiscal year period, the ordering activity may place an order under this schedule contract for a period up to the expiration of the contract period, notwithstanding the intervening fiscal years.

f. Ordering activities should notify the Contractor in writing thirty (30) calendar days prior to the expiration of maintenance service, if maintenance is to be terminated at that time. Orders for continued maintenance will be required if maintenance is to be continued during the subsequent period.

3. REPAIR SERVICE AND REPAIR PARTS/SPARE PARTS ORDERS

a. Agencies may use written orders, EDI orders, credit card orders, blanket purchase agreements (BPAs), or small order procedures for ordering repair service and/or repair parts/spare parts under this contract. Orders for repair service shall not extend beyond the end of the contract period.

b. When repair service is ordered, only one chargeable repairman shall be dispatched to perform repair service, unless the ordering activity agrees, in advance, that additional repair personnel are required to effect repairs.

4. LOSS OR DAMAGE

When the Contractor removes equipment to his establishment for repairs, the Contractor shall be responsible for any damage or loss, from the time the equipment is removed from the ordering activity installation, until the equipment is returned to such installation.

5. SCOPE

a. The Contractor shall provide maintenance for all equipment listed herein, as requested by the ordering activity during the contract term. Repair service and repair parts/spare parts shall apply exclusively to the equipment types/models within the scope of this Information Technology Schedule.

b. Equipment placed under maintenance service shall be in good operating condition.

(1) In order to determine that the equipment is in good operating condition, the equipment shall be subject to inspection by the Contractor, without charge to the ordering activity.

(2) Costs of any repairs performed for the purpose of placing the equipment in good operating condition shall be borne by the Contractor, if the equipment was under the Contractor's guarantee/warranty or maintenance responsibility prior to the effective date of the maintenance order.

Page 17 4/10/2013

(3) If the equipment was not under the Contractor's responsibility, the costs necessary to place the equipment in proper operating condition are to be borne by the ordering activity, in accordance with the provisions of Special Item Number 132-12 (or outside the scope of this contract).

6. RESPONSIBILITIES OF THE ORDERING ACTIVITY

a. Ordering activity personnel shall not perform maintenance or attempt repairs to equipment while such equipment is under the purview of a maintenance order, unless agreed to by the Contractor.

b. Subject to security regulations, the ordering activity shall permit access to the equipment which is to be maintained or repaired.

c. If the Ordering Activity desires a factory authorized/certified service personnel then this should be clearly stated in the task or delivery order.

7. RESPONSIBILITIES OF THE CONTRACTOR

a. For equipment not covered by a maintenance contract or warranty, the Contractor's repair service personnel shall complete repairs as soon as possible after notification by the ordering activity that service is required. Within the service areas, this repair service should normally be done within 4 hours after notification.

b. If the Ordering Activity task or delivery order specifies a factory authorized/certified service personnel then the Contractor is obligated to provide such a factory authorized/certified service personnel for the equipment to be repaired or serviced, unless otherwise agreed to in advance between the Agency and the Contractor.

8. MAINTENANCE RATE PROVISIONS

a. The Contractor shall bear all costs of maintenance, including labor, parts, and such other expenses as are necessary to keep the equipment in good operating condition, provided that the required repairs are not occasioned by fault or negligence of the ordering activity.

b. REGULAR HOURS

The basic monthly rate for each make and model of equipment shall entitle the ordering activity to maintenance service during a mutually agreed upon nine (9) hour principal period of maintenance, Monday through Friday, exclusive of holidays observed at the ordering activity location.

c. AFTER HOURS

Should the ordering activity require that maintenance be performed outside of Regular Hours, charges for such maintenance, if any, will be specified in the pricelist. Periods of less than one hour will be prorated to the nearest quarter hour.

d. TRAVEL AND TRANSPORTATION If any charge is to apply, over and above the regular maintenance rates, because of the distance between the ordering activity location and the Contractor’s service area, the charge will be negotiated at the Task Order level.

Page 18 4/10/2013

e. QUANTITY DISCOUNTS Quantity discounts from listed maintenance service rates for multiple equipment owned and/or leased by a ordering activity are indicated below:

Quantity Range Discounts ________ Units ________% ________ Units ________% ________ Units ________%

9. REPAIR SERVICE RATE PROVISIONS

a. CHARGES. Charges for repair service will include the labor charge, computed at the rates set forth below, for the time during which repairmen are actually engaged in work, and, when applicable, the charge for travel or transportation.

b. MULTIPLE MACHINES. When repairs are ordered by a ordering activity on two or more machines located in one or more buildings within walking distance of each other, the charges will be computed from the time the repairman commences work on the first machine, until the work is completed on the last machine. The time required to go from one machine to another, or from one building to another, will be considered actual work performance, and chargeable to the ordering activity, provided the time consumed in going between machines (or buildings) is reasonable.

c. TRAVEL OR TRANSPORTATION

(1) AT THE CONTRACTOR'S SHOP

(a) When equipment is returned to the Contractor's shop for adjustments or repairs which are not covered by the guarantee/warranty provision, the cost of transportation, packing, etc., from the ordering activity location to the Contractor's plant, and return to the ordering activity location, shall be borne by the ordering activity.

(b) The ordering activity should not return defective equipment to the Contractor for adjustments and repairs or replacement without his prior consultation and instruction.

(2) AT THE ORDERING ACTIVITY LOCATION (Within Established Service Areas) When equipment is repaired at the ordering activity location, and repair service rates are established for service areas or zones, the listed rates are applicable to any ordering activity location within such service areas or zones. No extra charge, time, or expense will be allowed for travel or transportation of repairmen or machines to or from the ordering activity office; such overhead is included in the repair service rates listed.

(3) AT THE ORDERING ACTIVITY LOCATION (Outside Established Service Areas)

(a) If repairs are to be made at the ordering activity location, and the location is outside the service area as shown in paragraph 1.a, the

Page 19 4/10/2013 repair service and mileage rates negotiated per subparagraphs 1.a and 8.d will apply.

(b) When the overall travel charge computed at the above mileage rate is unreasonable (considering the time required for travel, actual and necessary transportation costs, and the allowable ordering activity per diem rate for each night the repairman is required to remain overnight at the ordering activity location), the ordering activity shall have the option of reimbursing the Contractor for actual costs, provided that the actual costs are reasonable and allowable. The Contractor shall furnish the ordering activity with a report of travel performed and related expenses incurred. The report shall include departure and arrival dates, times, and the applicable mode of travel.

d. LABOR RATES

(1) REGULAR HOURS

The Regular Hours repair service rates listed herein shall entitle the ordering activity to repair service during the period 8:00 a.m. to 5:00 p.m., Monday through Friday, exclusive of holidays observed at the ordering activity location. There shall be no additional charge for repair service which was requested during Regular Hours, but performed outside the Regular Hours defined above, at the convenience of the Contractor.

(2) AFTER HOURS

When the ordering activity requires that repair service be performed outside the Regular Hours defined above, except Sundays and Holidays observed at the ordering activity location, the After Hours repair service rates listed herein shall apply. The Regular Hours rates defined above shall apply when repair service is requested during Regular Hours, but performed After Hours at the convenience of the Contractor.

(3) SUNDAYS AND HOLIDAYS

When the ordering activity requires that repair service be performed on Sundays and Holidays observed at the ordering activity location, the Sundays and Holidays repair service rates listed herein shall apply.

When repair service is requested to be performed during Regular Hours and/or After Hours, but is performed at the convenience of the Contractor on Sundays or Holidays observed at the ordering activity location, the Regular Hours and/or After Hours repair service rates, as applicable, shall apply.

Page 20 4/10/2013

REPAIR SERVICE RATES

REGULAR AFTER SUNDAYS AND

MINIMUM HOURS HOURS HOLIDAYS

LOCATION CHARGE* PER HOUR** PER HOUR** PER HOUR

CONTRACTOR'S SHOP $ 55.00 $ 55.00 $ 75.00 $ 95.00

ORDERING ACTIVITY LOCATION

(WITHIN ESTABLISHED

SERVICE AREAS) $ 75.00 $ 75.00 $ 75.00 $ 125.00

ORDERING ACTIVITY LOCATION

(OUTSIDE ESTABLISHED

SERVICE AREAS) $ 100.00 $ 100.00 $ 125.00 $ 125.00

*MINIMUM CHARGES INCLUDE 1 FULL HOURS ON THE JOB.

**FRACTIONAL HOURS, AT THE END OF THE JOB, WILL BE PRORATED TO THE NEAREST QUARTER

HOUR.

10. REPAIR PARTS/SPARE PARTS RATE PROVISIONS

All parts, furnished as spares or as repair parts in connection with the repair of equipment, unless otherwise indicated in this pricelist, shall be new, standard parts manufactured by the equipment manufacturer. All parts shall be furnished at prices indicated in the Contractor's commercial pricelist current at the time of service, with a markup of 7% over contractor’s cost.

11. GUARANTEE/WARRANTY—REPAIR SERVICE AND REPAIR PARTS/SPARE PARTS

a. REPAIR SERVICE All repair work will be guaranteed/warranted for a period of One Year.

b. REPAIR PARTS/SPARE PARTS All parts, furnished either as spares or repairs parts will be guaranteed/warranted for a period equal to the manufacturer’s commercial warranty.

12. INVOICES AND PAYMENTS

a. Maintenance Service

(1) Invoices for maintenance service shall be submitted by the Contractor on a quarterly or monthly basis, after the completion of such period.

Maintenance charges must be paid in arrears (31 U.S.C. 3324). PROMPT

PAYMENT DISCOUNT, IF APPLICABLE, SHALL BE SHOWN ON THE

INVOICE.

(2) Payment for maintenance service of less than one month's duration shall be prorated at 1/30th of the monthly rate for each calendar day.

b. Repair Service and Repair Parts/Spare Parts Invoices for repair service and parts shall be submitted by the Contractor as soon as possible after completion of work. Payment under blanket purchase agreements will be made quarterly or monthly, except where cash payment procedures are used. Invoices shall be submitted separately to each ordering

Page 21 4/10/2013 activity office ordering services under the contract. The cost of repair parts shall be shown as a separate item on the invoice, and shall be priced in accordance with paragraph #10, above. PROMPT PAYMENT DISCOUNT, IF APPLICABLE, SHALL BE SHOWN ON THE INVOICE.

Page 22 4/10/2013

TERMS AND CONDITIONS APPLICABLE TO TERM SOFTWARE LICENSES (SPECIAL ITEM NUMBER

132-32), PERPETUAL SOFTWARE LICENSES (SPECIAL ITEM NUMBER 132-33) AND

MAINTENANCE AS A SERVICE (SPECIAL ITEM NUMBER 132-34) OF GENERAL PURPOSE

COMMERCIAL INFORMATION TECHNOLOGY SOFTWARE

1. INSPECTION/ACCEPTANCE

The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The ordering activity reserves the right to inspect or test any software that has been tendered for acceptance. The ordering activity may require repair or replacement of nonconforming software at no increase in contract price. The ordering activity must exercise its post acceptance rights (1) within a reasonable time after the defect was discovered or should have been discovered; and (2) before any substantial change occurs in the condition of the software, unless the change is due to the defect in the software.

2. GUARANTEE/WARRANTY

a. Unless specified otherwise in this contract, the Contractor’s standard commercial guarantee/warranty as stated in the contract’s commercial pricelist will apply to this contract.

b. The Contractor warrants and implies that the items delivered hereunder are merchantable and fit for use for the particular purpose described in this contract.

c. Limitation of Liability. Except as otherwise provided by an express or implied warranty, the Contractor will not be liable to the ordering activity for consequential damages resulting from any defect or deficiencies in accepted items.

3. TECHNICAL SERVICES

The Contractor, without additional charge to the ordering activity, shall provide a hot line technical support number (703) 276-7800 for the purpose of providing user assistance and guidance in the implementation of the software. The technical support number is available from 10:00 am to 04:00 pm Eastern time Monday through Friday.

4. SOFTWARE MAINTENANCE

a. Software maintenance as it is defined: (select software maintenance type) :

____X____ 1. Software Maintenance as a Product (SIN 132-32 or SIN 132-33)

Software maintenance as a product includes the publishing of bug/defect fixes via patches and updates/upgrades in function and technology to maintain the operability and usability of the software product. It may also include other no charge support that are included in the purchase price of the product in the commercial marketplace. No charge support includes items such as user blogs, discussion forums, on-line help libraries and FAQs (Frequently Asked Questions), hosted chat rooms, and limited telephone, email and/or web-based general technical support for user’s self diagnostics.

Page 23 4/10/2013

Software maintenance as a product does NOT include the creation, design, implementation, integration, etc. of a software package. These examples are considered software maintenance as a service.

Software Maintenance as a product is billed at the time of purchase.

------------ 2. Software Maintenance as a Service (SIN 132-34)

Software maintenance as a service creates, designs, implements, and/or integrates customized changes to software that solve one or more problems and is not included with the price of the software. Software maintenance as a service includes person-to-person communications regardless of the medium used to communicate: telephone support, on-line technical support, customized support, and/or technical expertise which are charged commercially. Software maintenance as a service is billed arrears in accordance with 31 U.S.C. 3324.

Software maintenance as a service is billed in arrears in accordance with 31 U.S.C. 3324.

b. Invoices for maintenance service shall be submitted by the Contractor on a quarterly or monthly basis, after the completion of such period. Maintenance charges must be paid in arrears (31 U.S.C. 3324). PROMPT PAYMENT

DISCOUNT, IF APPLICABLE, SHALL BE SHOWN ON THE INVOICE.

5. PERIODS OF TERM LICENSES (SIN 132 32) AND MAINTENANCE (SIN 132 34)

a. The Contractor shall honor orders for periods for the duration of the contract period or a lessor period of time.

b. Term licenses and/or maintenance may be discontinued by the ordering activity on…