Federal Supply Schedule GS35F0194U

AUTHORIZED

INFORMATION TECHNOLOGY SCHEDULE PRICELIST

GENERAL PURPOSE COMMERCIAL INFORMATION TECHNOLOGY

EQUIPMENT, SOFTWARE AND SERVICES

SPECIAL ITEM NUMBER 132-8 PURCHASE OF NEW EQUIPMENT

FSC CLASS 7010 - SYSTEM CONFIGURATION

End User Computers/Desktop Computers Professional Workstations Servers Laptop/Portable/Notebook Computers

Large Scale Computers Optical and Imaging Systems Other Systems Configuration Equipment, Not Elsewhere Classified

FSC CLASS 7025 - INPUT/OUTPUT AND STORAGE DEVICES

Printers Display Graphics, including Video Graphics, Light Pens, Digitizers, Scanners, and Touch Screens Network Equipment Other Communications Equipment

Optical Recognition Input/Output Devices Storage Devices including Magnetic Storage, Magnetic Tape Storage and Optical Disk Storage Other Input/Output and Storage Devices, Not Elsewhere Classified

FSC CLASS 5820 - RADIO AND TELEVISION COMMUNICATION EQUIPMENT, EXCEPT AIRBORNE

Two-Way Radio Transmitters/Receivers/Antennas Broadcast Band Radio Transmitters/Receivers/Antennas Microwave Radio Equipment/Antennas and Waveguides Satellite Communications Equipment

SPECIAL ITEM NUMBER 132-12 - EQUIPMENT MAINTENANCE

- Maintenance

- Repair Service

- Repair Parts/Spare Parts

SPECIAL ITEM NUMBER 132-52 - ELECTRONIC COMMERCE (EC) SERVICES

FPDS Code D304 Internet Access Services FPDS Code D399 Other Data Transmission Services, Not Elsewhere Classified - Except “Voice” and Pager Services

SPECIAL ITEM NUMBER 132-51 - INFORMATION TECHNOLOGY (IT) PROFESSIONAL SERVICES

FPDS Code D302 IT Systems Development Services FPDS Code D306 IT Systems Analysis Services FPDS Code D307 Automated Information Systems Design and Integration Services FPDS Code D310 IT Backup and Security Services FPDS Code D316 IT Network Management Services FPDS Code D317 Creation/Retrieval of IT Related Automated News Services, Data Services, or

Other Information Services (All other information services belong under Schedule 76) FPDS Code D399 Other Information Technology Services, Not Elsewhere Classified

SPECIAL ITEM NO. 132-54 COMMERCIAL SATELLITE COMMUNICATIONS (COMSATCOM) TRANSPONDED CAPACITY

FPDS CODE D304 Includes dedicated bandwidth and power on a commercial satellite in any commercially available COMSATCOM frequency band, including, but not limited to, L-, S-, C-, X-, Ku-, extended Ku, Ka-, and UHF

SPECIAL ITEM NO. 132-55 COMMERCIAL SATELLITE COMMUNICATIONS (COMSATCOM) SUBSCRIPTION SERVICES.

FPDS CODE D304 Includes pre-existing, pre-engineered Fixed Satellite Service and/or Mobile Satellite Service solutions, typically including shared satellite resources and contractor-specified equipment, in any commercially available COMSATCOM frequency band, including, but limited to, L-, S-, C-, X-, Ku-, extended Ku, Ka- and UHF.

Note 1: All non-professional labor categories must be incidental to and used solely to support hardware, software and/or professional services, and cannot be purchased separately.

Note 2: Offerors and Agencies are advised that the Group 70 – Information Technology Schedule is not to be used as a means to procure services which properly fall under the Brooks Act. These services include, but are not limited to, architectural, engineering, mapping, cartographic production, remote sensing, geographic information systems, and related services. FAR 36.6 distinguishes between mapping services of an A/E nature and mapping services which are not connected nor incidental to the traditionally accepted A/E Services.

Note 3: This solicitation is not intended to solicit for the reselling of IT Professional Services, except for the provision of implementation, maintenance, integration, or training services in direct support of a product. Under such circumstances the services must be performance by the publisher or manufacturer or one of their authorized agents.

MTN Government Services, Inc.

161 Fort Evans Road NE, Suite 220

Leesburg, VA 20176-3372 Telephone: 703-443-6738

Fax: 703-443-1739 www.MTNGS.com

Contract Number: GS-35F-0194U Period Covered by Contract: 01/10/2008 through 01/09/2018

General Services Administration

Pricelist current through Modification #PA-0031 dated March 10. 2015 and Refresh 34

Products and ordering information in this Authorized Information Technology Schedule Pricelist are also available on the GSA Advantage! System (http://www.gsaadvantage.gov).

TABLE OF CONTENTS

INFORMATION FOR ORDERING ACTIVITIES

TERMS AND CONDITIONS APPLICABLE TO PURCHASE OF GENERAL PURPOSE COMMERCIAL

INFORMATION TECHNOLOGY NEW EQUIPMENT (SPECIAL ITEM NUMBER 132-8)

TERMS AND CONDITIONS APPLICABLE TO MAINTENANCE, REPAIR SERVICE AND REPAIR PARTS/SPARE

PARTS FOR GOVERNMENT OWNED GENERAL PURPOSE COMMERCIAL INFORMATION TECHNOLOGY

(IT) EQUIPMENT 132-12

TERMS AND CONDITIONS APPLICABLE TO INFORMATION TECHNOLOGY PROFESSIONAL SERVICES

(SPECIAL IDENTIFICATION NUMBER 132-51)

MTNGS PROFESSIONAL SERVICES LABOR CATEGORY DESCRIPTIONS

MTNGS GSA AUTHORIZED PROFESSIONAL SERVICES RATES

TERMS AND CONDITIONS APPLICABLE TO ELECTRONIC-COMMERCE

(EC) (SPECIAL IDENTIFICATION NUMBER 132-52)

TERMS AND CONDITIONS APPLICABLE TO COMMERCIAL SATELLITE COMMUNICATIONS

(COMSATCOM) SERVICES (SPECIAL ITEM NUMBER 132-54 AND 132-55

USA COMMITMENT TO PROMOTE SMALL BUSINESS PARTICIPATION PROCUREMENT PROGRAMS

BEST VALUE BLANKET PURCHASE AGREEMENT FEDERAL SUPPLY SCHEDULE

MTNGS BLANKET PURCHASE AGREEMENT .................................................................................................... …162

BASIC GUIDELINES FOR USING “CONTRACTOR TEAM ARRANGEMENTS”

http://www.mtngs.com/

SPECIAL NOTICE TO AGENCIES:

Small Business Participation

SPECIAL NOTICE TO AGENCIES: Small Business Participation SBA strongly supports the participation of small business concerns in the Federal Acquisition Service. To enhance Small Business Participation SBA policy allows agencies to include in their procurement base and goals, the dollar value of orders expected to be placed against the Federal Supply Schedules, and to report accomplishments against these goals.

For orders exceeding the micropurchase threshold, FAR 8.404 requires agencies to consider the catalogs/pricelists of at least three schedule contractors or consider reasonably available information by using the GSA Advantage! on-line shopping service (www.gsaadvantage.gov). The catalogs/pricelists, GSA Advantage! and the Federal Acquisition Service Home Page (www.fss.gsa.gov) contains information on a broad array of products and services offered by small business concerns.

This information should be used as a tool to assist ordering activities in meeting or exceeding established small business goals. It should also be used as a tool to assist in including small, small disadvantaged, and women-owned small businesses among those considered when selecting pricelists for a best value determination.

For orders exceeding the micropurchase threshold, customers are to give preference to small business concerns when two or more items at the same delivered price will satisfy their requirement.

1. GEOGRAPHIC SCOPE OF CONTRACT:

Domestic delivery is delivery within the 48 contiguous states, Alaska, Hawaii, Puerto Rico, Washington, DC, and U.S. Territories. Domestic delivery also includes a port or consolidation point, within the aforementioned areas, for orders received from overseas activities.

Overseas delivery is delivery to points outside of the 48 contiguous states, Washington, DC, Alaska, Hawaii, Puerto Rico, and U.S. Territories.

Offerors are requested to check one of the following boxes:

[XX ] The Geographic Scope of Contract will be domestic and overseas delivery.

[ ] The Geographic Scope of Contract will be overseas delivery only.

[ ] The Geographic Scope of Contract will be domestic delivery only.

For Special Item Number 132-53 Wireless Services ONLY, if awarded, list the limited geographic coverage area:

2. CONTRACTOR’S ORDERING ADDRESS:

ATTN: Order Processing MTN Government Services, Inc.

161 Fort Evans Road, NE Leesburg, VA 20176-3372

(703) 443-6738 Tel

(703) 443-1739 FAX

www.mtngs.com

Contractor’s Service Area: All Ordering activity locations within the scope of the contract.

INFORMATION FOR ORDERING ACTIVITIES

MTNGS GS-35F-0194U Page 3 703-443-6738

Contractor’s Payment Address:

ATTN: Accounts Payable MTN Government Services, Inc.

161 Fort Evans Road, NE Leesburg, VA 20176-3372

(703) 443-6738 Tel

(703) 443-1739 FAX

www.mtngs.com

Contractors are required to accept the credit card for payments equal to or less that the micro-purchase threshold for oral or written delivery orders. Credit cards will be acceptable for payment above the micro-purchase threshold. In addition, bank account information for wire transfer payments will be shown on the invoice.

The following telephone number (s) can be used by ordering activities to obtain technical and/or ordering assistance:

703-443-6738

When Authorized Dealers are allowed by the Contractor to bill ordering activities and accept payment, the order and/or payment must be in the name of the Contractor, in care of the Authorized Dealer.

3. LIABILITY FOR INJURY OR DAMAGE

The Contractor shall not be liable for any injury to Ordering activity personnel or damage to Ordering activity property arising from the use of equipment maintained by the Contractor, unless such injury or damage is due to the fault or negligence of the Contractor.

4. STATISTICAL DATA FOR GOVERNMENT ORDERING OFFICE COMPLETION OF

STANDARD FORM 279

Block 9: G. Order/Modification Under Federal Schedule Block 16: Data Universal Numbering System (DUNS): 830-061-094 Block 30: Type of Contractor: B. Large Business Block 31: Woman-Owned Small Business: No Block 36: Contractor's Taxpayer Identification Number (TIN): 84-1289974

4a. CAGE CODE: 5FTC3

4b. Contractor has registered with the Central Contractor Registration Database.

5. FOB - DESTNATION

6. DELIVERY SCHEDULE

a. Time of Delivery: The contractor shall deliver to destination within the number of calendar days after receipt of order (ARO), as set forth below.

Items or Groups of Items (SIN or Delivery Time Nomenclature) (Days ARO)

132-8 30 Days

132-12 30 Days 132-51 30 Days 132-52 30 Days 132-54 15 Days 132-55 15 Days

MTNGS GS-35F-0194U Page 4

b. Urgent Requirements: When the Federal Supply Schedule contract delivery period does not meet the bona fide urgent delivery requirements of an ordering activity, ordering activities are encouraged, if time permits, to contact the contractor for the purpose of obtaining accelerated delivery. The contractor shall reply to the inquiry within 3 workdays after receipt. (Telephonic replies shall be confirmed by the contractor in writing.) If the contractor offers an accelerated delivery time acceptable to the ordering activity, any order(s) placed pursuant to the agreed upon accelerated delivery time frame shall be delivered within this shorter delivery time and in accordance with all other terms and conditions of the contract.

c. i. SIN 132-54 and SIN 132-55, ACCELERATED SERVICE DELIVERY (7 calendar days or less): the time required for COMSATCOM services to be available after order award. Under Accelerated Service Task Orders, service acceptance testing, unless otherwise required by the satellite provider or host nation, shall be deferred until Ordering Activity operations permit.

ii. SIN 132-54 and SIN 132-55, TIME-CRITICAL DELIVERY (4 hours or less): the time required for COMSATCOM services to be available after order award. Under Time-Critical Task Orders, service acceptance testing unless otherwise required by the satellite provider or host nation shall be deferred until Ordering Activity operations permit. Time-Critical Delivery shall be predicated on the availability of COMSATCOM transponded capacity (contracted bandwidth and power, pre-arranged Host Nation Agreements, frequency clearance) or COMSATCOM subscription services (bandwidth, terminals, network resources, etc.).

iii. For SIN 132-54 and SIN 132-55, EXTENDED SERVICE DELIVERY TIMES: the time required under extenuating circumstances for COMSATCOM services to be available after order award. Such extenuating circumstances may include extended time required for host nation agreements or landing rights, or other time intensive service delivery requirements as defined in the individual requirement. Any such extended delivery times will be negotiated between the Ordering Activity and Contractor.

SINs 132-54 and 132-55

Emergency Delivery Terms 7 Days Accelerated Delivery Terms 4 Hours or Less

7. DISCOUNTS: Prices shown are NET Prices; Basic Discounts have been deducted.

a. Prompt Payment: SINs 132-54 and 132-55 only : 1% 20Days/Net 30;

All other SINs: None – 0% - 30 days from receipt of invoice or date of acceptance, whichever is later.

b. Quantity: None

c. Dollar Volume: SINs 132-54 and 132-55 only - 2% for single orders of $5 Million + All other SINs: None

d. Other Special Discounts (i.e. Government Education Discounts, etc.): None.

8. TRADE AGREEMENTS ACT OF 1979, AS AMENDED: All items are U.S. made end products, designated country end products, Caribbean Basin country end products, Canadian end products, or Mexican end products as defined in the Trade Agreements Act of 1979, as amended.

9. STATEMENT CONCERNING AVAILABILITY OF EXPORT PACKING: Not applicable.

10. SMALL REQUIREMENTS: The minimum dollar value of orders to be issued is $100.00.

11. MAXIMUM ORDER: (All dollar amounts are exclusive of any discount for prompt payment.)

a. The Maximum Order value for the following Special Item Numbers (SINs) is $500,000:

Special Item Number 132-8 - Purchase of Equipment Special Item Number 132-12 – Equipment Maintenance Special Item Number 132-51 – Professional Services Special Item Number 132-52 – Electronic Commerce (EC) Services

MTNGS GS-35F-0194U Page 5

Special Item Number 132-54 – Commercial Satellite Communications (COMSATCOM) Transponded Capacity Special Item Number 132-55 – Commercial Satellite Communications (COMSATCOM) Subscription Services

12. ORDERING PROCEDURES FOR FEDERAL SUPPLY SCHEDULE CONTRACTS

Ordering activities shall use the ordering procedures of Federal Acquisition Regulation (FAR) 8.405 when placing an order or establishing a BPA for supplies or services. These procedures apply to all schedules.

a. FAR 8.405-1 Ordering procedures for supplies, and services not requiring a statement of work.

b. FAR 8.405-2 Ordering procedures for services requiring a statement of work.

13. FEDERAL INFORMATION TECHNOLOGY/TELECOMMUNICATION STANDARDS

REQUIREMENTS: Ordering activities acquiring products from this Schedule must comply with the provisions of the Federal Standards Program, as appropriate (reference: NIST Federal Standards Index).

Inquiries to determine whether or not specific products listed herein comply with Federal Information Processing Standards (FIPS) or Federal Telecommunication Standards (FED-STDS), which are cited by ordering activities, shall be responded to promptly by the Contractor.

13.1 FEDERAL INFORMATION PROCESSING STANDARDS PUBLICATIONS (FIPS PUBS):

Information Technology products under this Schedule that do not conform to Federal Information Processing Standards (FIPS) should not be acquired unless a waiver has been granted in accordance with the applicable "FIPS Publication." Federal Information Processing Standards Publications (FIPS PUBS) are issued by the U.S. Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security Act. Information concerning their availability and applicability should be obtained from the National Technical Information Service (NTIS), 5285 Port Royal Road, Springfield, Virginia 22161. FIPS PUBS include voluntary standards when these are adopted for Federal use.

Individual orders for FIPS PUBS should be referred to the NTIS Sales Office, and orders for subscription service should be referred to the NTIS Subscription Officer, both at the above address, or telephone number

(703) 487-4650.

13.2 FEDERAL TELECOMMUNICATION STANDARDS (FED-STDS): Telecommunication products under this Schedule that do not conform to Federal Telecommunication Standards (FED-STDS) should not be acquired unless a waiver has been granted in accordance with the applicable "FED-STD." Federal Telecommunication Standards are issued by the U.S. Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security Act. Ordering information and information concerning the availability of FED-STDS should be obtained from the GSA, Federal Supply Service, Specification Section, 470 East L’Enfant Plaza, Suite 8100, SW, Washington, DC 20407, telephone number (202)619-8925. Please include a self-addressed mailing label when requesting information by mail. Information concerning their applicability can be obtained by writing or calling the U.S. Department of Commerce, National Institute of Standards and Technology, Gaithersburg, MD 20899, telephone number (301)975-2833.

14. CONTRACTOR TASKS / SPECIAL REQUIREMENTS (C-FSS-370) (NOV 2001)

(a) Security Clearances: The Contractor may be required to obtain/possess varying levels of security clearances in the performance of orders issued under this contract. All costs associated with obtaining/possessing such security clearances should be factored into the price offered under the Multiple Award Schedule.

(b) Travel: The Contractor may be required to travel in performance of orders issued under this contract.

Allowable travel and per diem charges are governed by Pub .L. 99-234 and FAR Part 31, and are reimbursable by the ordering agency or can be priced as a fixed price item on orders placed under the Multiple Award Schedule. Travel in performance of a task order will only be reimbursable to the extent authorized by the ordering agency. The Industrial Funding Fee does NOT apply to travel and per diem charges.

MTNGS GS-35F-0194U Page 6

(c) Certifications, Licenses and Accreditations: As a commercial practice, the Contractor may be required to obtain/possess any variety of certifications, licenses and accreditations for specific FSC/service code classifications offered. All costs associated with obtaining/ possessing such certifications, licenses and accreditations should be factored into the price offered under the Multiple Award Schedule program.

(d) Insurance: As a commercial practice, the Contractor may be required to obtain/possess insurance coverage for specific FSC/service code classifications offered. All costs associated with obtaining/possessing such insurance should be factored into the price offered under the Multiple Award Schedule program.

(e) Personnel: The Contractor may be required to provide key personnel, resumes or skill category descriptions in the performance of orders issued under this contract. Ordering activities may require agency approval of additions or replacements to key personnel.

(f) Organizational Conflicts of Interest: Where there may be an organizational conflict of interest as determined by the ordering agency, the Contractor’s participation in such order may be restricted in accordance with FAR Part 9.5.

(g) Documentation/Standards: The Contractor may be requested to provide products or services in accordance with rules, regulations, OMB orders, standards and documentation as specified by the agency’s order.

(h) Data/Deliverable Requirements: Any required data/deliverables at the ordering level will be as specified or negotiated in the agency’s order.

(i) Government-Furnished Property: As specified by the agency’s order, the Government may provide property, equipment, materials or resources as necessary.

(j) Availability of Funds: Many Government agencies’ operating funds are appropriated for a specific fiscal year. Funds may not be presently available for any orders placed under the contract or any option year.

The Government’s obligation on orders placed under this contract is contingent upon the availability of appropriated funds from which payment for ordering purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are available to the ordering Contracting Officer.

(k) Overtime: For professional services, the labor rates in the Schedule should not vary by virtue of the Contractor having worked overtime. For services applicable to the Service Contract Act (as identified in the Schedule), the labor rates in the Schedule will vary as governed by labor laws (usually assessed a time and a half of the labor rate).

15. CONTRACT ADMINISTRATION FOR ORDERING ACTIVITIES: Any ordering activity, with respect to any one or more delivery orders placed by it under this contract, may exercise the same rights of termination as might the GSA Contracting Officer under provisions of FAR 52.212-4, paragraphs (l) Termination for the ordering activity’s convenience, and (m) Termination for Cause (See 52.212-4)

16. GSA ADVANTAGE!: GSA Advantage! is an on-line, interactive electronic information and ordering system that provides on-line access to vendors' schedule prices with ordering information. GSA Advantage! Will allow the user to perform various searches across all contracts including, but not limited to:

(a) Manufacturer

(b) Manufacturer’s Part Number; and

(c) Product category(ies).

Agencies can browse GSA Advantage! by accessing the Internet World Wide Web utilizing a browser (ex:

NetScape). The Internet address is http://www.fss.gsa.gov.

17. PURCHASE OF OPEN MARKET ITEMS

MTNGS GS-35F-0194U Page 7

NOTE: Open Market Items are also known as incidental items, noncontract items, non-Schedule items, and items not on a Federal Supply Schedule contract. Ordering Activities procuring open market items must follow FAR 8.402(f).

For administrative convenience, an ordering activity contracting officer may add items not on the Federal Supply Multiple Award Schedule (MAS) -- referred to as open market items -- to a Federal Supply Schedule blanket purchase agreement (BPA) or an individual task or delivery order, only if-

(1) All applicable acquisition regulations pertaining to the purchase of the items not on the Federal Supply Schedule have been followed (e.g., publicizing (Part 5), competition requirements (Part 6), acquisition of commercial items (Part 12), contracting methods (Parts 13, 14, and 15), and small business programs (Part 19));

(2) The ordering activity contracting officer has determined the price for the items not on the Federal Supply Schedule is fair and reasonable;

(3) The items are clearly labeled on the order as items not on the Federal Supply Schedule; and

(4) All clauses applicable to items not on the Federal Supply Schedule are included in the order.

18. CONTRACTOR COMMITMENTS, WARRANTIES AND REPRESENTATIONS:

a. For the purpose of this contract, commitments, warranties and representations include, in addition to those agreed to for the entire schedule contract:

(1) Time of delivery/installation quotations for individual orders;

(2) Technical representations and/or warranties of products concerning performance, total system performance and/or configuration, physical, design and/or functional characteristics and capabilities of a product/equipment/ service/software package submitted in response to requirements which result in orders under this schedule contract.

(3) Any representations and/or warranties concerning the products made in any literature, description, drawings and/or specifications furnished by the Contractor.

b. The above is not intended to encompass items not currently covered by the GSA Schedule contract.

c. The maintenance/repair service provided is the standard commercial terms and conditions for the type of products and/or services awarded.

19. OVERSEAS ACTIVITIES:

The terms and conditions of this contract shall apply to all orders for installation, maintenance and repair of equipment in areas listed in the pricelist outside the 48 contiguous states and the District of Columbia, except as indicated below:

N/A

Upon request of the contractor, the Ordering activity may provide the contractor with logistics support, as available, in accordance with all applicable Ordering activity regulations. Such Ordering activity support will be provided on a reimbursable basis, and will only be provided to the Contractor's technical personnel whose services are exclusively required for the fulfillment of the terms and conditions of this contract.

20. BLANKET PURCHASE AGREEMENTS (BPAs)

The use of BPAs under any schedule contract to fill repetitive needs for supplies or services is allowable.

BPAs may be established with one or more schedule contractors. The number of BPAs to be established is within the discretion of the ordering activity establishing the BPA and should be based on a strategy that is expected to maximize the effectiveness of the BPA(s). Ordering activities shall follow FAR 8.405-3 when creating and implementing BPA(s).

MTNGS GS-35F-0194U Page 8

21. CONTRACTOR TEAM ARRANGEMENTS

Contractors participating in contractor team arrangements must abide by all terms and conditions of their respective contracts. This includes compliance with Clauses 552.238-74, Industrial Funding Fee and Sales Reporting, i.e., each contractor (team member) must report sales and remit the IFF for all products and services provided under its individual contract.

22. INSTALLATION, DEINSTALLATION, REINSTALLATION

The Davis-Bacon Act (40 U.S.C. 276a-276a-7) provides that contracts in excess of $2,000 to which the United States or the District of Columbia is a party for construction, alteration, or repair (including painting and decorating) of public buildings or public works with the United States, shall contain a clause that no laborer or mechanic employed directly upon the site of the work shall received less than the prevailing wage rates as determined by the Secretary of Labor. The requirements of the Davis-Bacon Act do not apply if the construction work is incidental to the furnishing of supplies, equipment, or services. For example, the requirements do not apply to simple installation or alteration of a public building or public work that is incidental to furnishing supplies or equipment under a supply contract. However, if the construction, alteration or repair is segregable and exceeds $2,000, then the requirements of the Davis-Bacon Act applies.

The ordering activity issuing the task order against this contract will be responsible for proper administration and enforcement of the Federal labor standards covered by the Davis-Bacon Act. The proper Davis-Bacon wage determination will be issued by the ordering activity at the time a request for quotations is made for applicable construction classified installation, deinstallation, and reinstallation services under SIN 132-8 or 132-9.

23. SECTION 508 COMPLIANCE.

I certify that in accordance with 508 of the Rehabilitation Act of 1973, as amended (29 U.S.C. 794d), FAR 39.2, and the Architectural and Transportation Barriers Compliance Board Electronic and Information Technology (EIT) Accessibility Standards (36 CFR 1194) General Services Administration (GSA), that all IT hardware/software/services are 508 compliant:

Yes _______ No_______

The offeror is required to submit with its offer a designated area on its website that outlines the Voluntary Product Accessibility Template (VPAT) or equivalent qualification, which ultimately becomes the Government Product Accessibility Template (GPAT). Section 508 compliance information on the supplies and services in this contract are available at the following website address (URL):

www.MTNGS.com

The EIT standard can be found at: www.Section508.gov/.

24. PRIME CONTRACTOR ORDERING FROM FEDERAL SUPPLY SCHEDULES.

Prime Contractors (on cost reimbursement contracts) placing orders under Federal Supply Schedules, on behalf of an ordering activity, shall follow the terms of the applicable schedule and authorization and include with each order –

(a) A copy of the authorization from the ordering activity with whom the contractor has the prime contract (unless a copy was previously furnished to the Federal Supply Schedule contractor); and

(b) The following statement:

This order is placed under written authorization from _______ dated _______. In the event of any inconsistency between the terms and conditions of this order and those of your Federal Supply Schedule contract, the latter will govern.

25. INSURANCE-WORK ON A ORDERING ACTIVITY INSTALLATION (JAN 1997)(FAR 52.228-5)

(a) The Contractor shall, at its own expense, provide and maintain during the entire performance of this contract, at least the kinds and minimum amounts of insurance required in the Schedule or elsewhere in the contract.

(b) Before commencing work under this contract, the Contractor shall notify the Contracting Officer in writing that the required insurance has been obtained. The policies evidencing required insurance shall contain an endorsement to the effect that any cancellation or any material change adversely affecting the Government's interest shall not be effective—

(1) For such period as the laws of the State in which this contract is to be performed prescribe; or

MTNGS GS-35F-0194U Page 9 http://www.section508.gov/

(2) Until 30 days after the insurer or the Contractor gives written notice to the Contracting Officer, whichever period is longer.

(c) The Contractor shall insert the substance of this clause, including this paragraph (c), in subcontracts under this contract that require work on a Government installation and shall require subcontractors to provide and maintain the insurance required in the Schedule or elsewhere in the contract.

The Contractor shall maintain a copy of all subcontractors' proofs of required insurance, and shall make copies available to the Contracting Officer upon request.

26. SOFTWARE INTEROPERABILITY.

Offerors are encouraged to identify within their software items any component interfaces that support open standard interoperability. An item’s interface may be identified as interoperable on the basis of participation in a Government agency-sponsored program or in an independent organization program.

Interfaces may be identified by reference to an interface registered in the component registry located at http://www.core.gov.

27. ADVANCE PAYMENTS

A payment under this contract to provide a service or deliver an article for the United States Government may not be more than the value of the service already provided or the article already delivered. Advance or pre-payment is not authorized or allowed under this contract. (31 U.S.C. 3324)

MTNGS GS-35F-0194U Page 10 http://www.core.gov/

TERMS AND CONDITIONS APPLICABLE TO PURCHASE OF

GENERAL PURPOSE COMMERCIAL INFORMATION TECHNOLOGY NEW EQUIPMENT

(SPECIAL ITEM NUMBER 132-8)

1. MATERIAL AND WORKMANSHIP

All equipment furnished hereunder must satisfactorily perform the function for which it is intended.

2. ORDER

Written orders, EDI orders (GSA Advantage! and FACNET), credit card orders, and orders placed under blanket purchase agreements (BPA) agreements shall be the basis for purchase in accordance with the provisions of this contract. If time of delivery extends beyond the expiration date of the contract, the Contractor will be obligated to meet the delivery and installation date specified in the original order.

For credit card orders and BPAs, telephone orders are permissible.

3. TRANSPORTATION OF EQUIPMENT

FOB DESTINATION. Prices cover equipment delivery to destination, for any location within the geographic scope of this contract.

4. INSTALLATION AND TECHNICAL SERVICES

a. INSTALLATION. When the equipment provided under this contract is not normally self-installable, the Contractor's technical personnel shall be available to the ordering activity, at the ordering activity's location, to install the equipment and to train ordering activity personnel in the use and maintenance of the equipment. The charges, if any, for such services are listed below, or in the price schedule:

Commercial Practices for Installation, Deinstallation and Reinstallation: Rapid Suitcase

b. INSTALLATION, DEINSTALLATION, REINSTALLATION. The Davis-Bacon Act (40 U.S.C. 276a- 276a-7) provides that contracts in excess of $2,000 to which the United States or the District of Columbia is a party for construction, alteration, or repair (including painting and decorating) of public buildings or public works with the United States, shall contain a clause that no laborer or mechanic employed directly upon the site of the work shall received less than the prevailing wage rates as determined by the Secretary of Labor. The requirements of the Davis-Bacon Act do not apply if the construction work is incidental to the furnishing of supplies, equipment, or services. For example, the requirements do not apply to simple installation or alteration of a public building or public work that is incidental to furnishing supplies or equipment under a supply contract. However, if the construction, alteration or repair is segregable and exceeds $2,000, then the requirements of the Davis-Bacon Act applies.

The ordering activity issuing the task order against this contract will be responsible for proper administration and enforcement of the Federal labor standards covered by the Davis-Bacon Act. The proper Davis-Bacon wage determination will be issued by the ordering activity at the time a request for quotations is made for applicable construction classified installation, deinstallation, and reinstallation services under SIN 132-8 or SIN 132-9.

c. OPERATING AND MAINTENANCE MANUALS. The Contractor shall furnish the ordering activity with one (1) copy of all operating and maintenance manuals which are normally provided with the equipment being purchased.

5. INSPECTION/ACCEPTANCE

The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The ordering activity reserves the right to inspect or test any equipment that has been tendered for acceptance. The ordering activity may require repair or replacement of nonconforming equipment at no increase in contract price.

The ordering activity must exercise its postacceptance rights (1) within a reasonable time after the defect was discovered or should have been discovered; and (2) before any substantial change occurs in the condition of the item, unless the change is due to the defect in the item.

6. WARRANTY

MTNGS GS-35F-0194U Page 11

a. Unless specified otherwise in this contract, the Contractor’s standard commercial warranty as stated in the contract’s commercial pricelist will apply to this contract.

b. The Contractor warrants and implies that the items delivered hereunder are merchantable and fit for use for the particular purpose described in this contract.

c. Limitation of Liability. Except as otherwise provided by an express or implied warranty, the Contractor will not be liable to the ordering activity for consequential damages resulting from any defect or deficiencies in accepted items.

d. If inspection and repair of defective equipment under this warranty will be performed at the Contractor's plant.

7. PURCHASE PRICE FOR ORDERED EQUIPMENT

The purchase price that the ordering activity will be charged will be the ordering activity purchase price in effect at the time of order placement, or the ordering activity purchase price in effect on the installation date (or delivery date when installation is not applicable), whichever is less.

8. RESPONSIBILITIES OF THE CONTRACTOR

The Contractor shall comply with all laws, ordinances, and regulations (Federal, State, City or otherwise) covering work of this character, and shall include all costs, if any, of such compliance in the prices quoted in this offer.

9. TRADE-IN OF INFORMATION TECHNOLOGY EQUIPMENT

When an ordering activity determines that Information Technology equipment will be replaced, the ordering activity shall follow the contracting policies and procedures in the Federal Acquisition Regulation (FAR), the policies and procedures regarding disposition of information technology excess personal property in the Federal Property Management Regulations (FPMR) (41 CFR 101-43.6), and the policies and procedures on exchange/sale contained in the FPMR (41 CFR part 101-46).

MTNGS GS-35F-0194U Page 12

SIN Product No.

MTN Product Name

Frequ Band Product Description

GSA Price

Antenna Systems ( ADE + BDE )

132-8

MTN-G1.0-

KT8D

1.0 M Seatel

Stabilized Turn-key System (domestic rack power) Ku-Band

1.0 meter antenna, stabilized pedestal to enable mobility, 48 inch radome, 8 watt Block Up Converter (BUC), linear Ku-band feed, Low Noise Block-down converter (LNB), satellite modem, rack-mountable spectrum monitor for troubleshooting, laptop (for monitoring purposes), 24-port Ethernet switch, GPS antenna, rack-mountable cooling fan, small rack enclosure with 110V (3 feet high), inter facility link kit (transmit, receive, power, GPS and Gyro cables), 1.5KVA Uninterruptible Power Supply (UPS), lifting slings for radome and rack accessories. Includes assembly, integration and test of the antenna system and all its components.

Data Configuration. Voice options available. (MTN-GV-4A, MTN-GV-12A, or MTN-GV-1TE1) Crated for international shipping. (Price per System) $ 81,259.91

132-8

MTN-G1.0-

KT8I

1.0 M Seatel

Stabilized Turn-key System (international rack power) Ku-Band

1.0 meter antenna, stabilized pedestal to enable mobility, 48 inch radome, 8 watt Block Up Converter (BUC), linear Ku-band feed, Low Noise Block-down converter, satellite modem, rack-mountable spectrum monitor for troubleshooting, laptop (for monitoring purposes), 24-port Ethernet switch, GPS antenna, rack-mountable cooling fan, small rack enclosure with 220V (3 feet high), inter facility link kit (transmit, receive, power, GPS and Gyro cables), 1.5KVA Uninterruptible Power Supply (UPS), lifting slings for radome and rack accessories. Includes assembly, integration and test of the antenna system and all its components. Data Configuration. Voice options available. (MTN-GV-4A, MTN-GV-12A, or MTN-GV- 1TE1) Crated for international shipping. (Price per System) $ 82,260.11

132-8

MTN-G1.0-

INST

1.0 M Antenna

System Installation Ku-Band

On site installation and system commissioning of MTN-supplied 1.0 M Stabilized Antenna System. System commissioning applicable in conjunction with MTN Satellite Service. Travel and living expenses billed in accordance with JFTR. Up to five days on site. (Price per Install) $ 9,140.54

MTNGS GS-35F-0194U Page 13

Name

Frequ Band Product Description

GSA Price

132-8

MTN-G2.4S-

CET80

2.4 M Seatel

Stabilized Enhanced Turn-key System C-Band

2.4 meter antenna, stabilized pedestal to enable mobility, 144 inch radome, 80 watt Block Up Converter (BUC), circular and linear C-Band feeds, Low Noise Block-down converter, satellite modem, rack-mountable spectrum monitor for troubleshooting, laptop (for monitoring purposes), 24-port Ethernet switch, GPS antenna, rack-mountable cooling fan, full rack enclosure (6 feet high), inter facility link kit (transmit, receive, power, GPS and Gyro cables), 5KVA Uninterruptible Power Supply (UPS), lifting slings for radome and rack accessories. Includes assembly, integration and test of the antenna system and all its components. Data Configuration. Voice options available. (MTN-GV-4A, MTN-GV-12A, or MTN-GV-1TE1) Crated for international shipping. (Price per System) $176,555.11

132-8

MTN-G2.4-

INST

2.4 M Antenna

System Installation C-Band

On site installation and system commissioning of MTN-supplied 2.4 M Stabilized Antenna System. System commissioning applicable in conjunction with MTN Satellite Service. Travel and living expenses billed in accordance with JFTR. Up to eight days on site. (Price per Install) $ 13,710.82

132-8

MTN-GOS-

SURVEY Site Survey C/Ku- Band

On-site survey to verify proper interfaces, physical location of indoor and outdoor equipment, inter facility link (IFL) cable routing, antenna location, special mounting requirements, environmental and AC power requirements. A detailed report will be provided upon completion. Travel and living expenses billed in accordance with JFTR. Site survey required with purchase of MTN-G1.0-INST and

MTN-G2.4-INST $ 1,435.69

132-8

MTN-RDT-

K-A Rapid Deployable Terminal (suitcase) Ku-Band

Rapid Deploy (nominally 15 minute set up), auto-acquisition 1.0 m Ku-band antenna, antenna control unit, satellite modem, 24 port Ethernet switch, and 7 watt Block Up Converter. Complete with three hard transit cases and cables.

Step by step training video included. Voltage 110V. Data Configuration. Voice options available. (MTN-GV-4A, MTN-GV-12A, or MTN-GV-1TE1) Crated for international shipping. (Price per System) $ 78,311.97

MTNGS GS-35F-0194U Page 14

Name

Frequ Band Product Description

GSA Price

Optional Items

132-8

MTN-G1.0-

KSP

Spares Kit for Seatel 4006, 1.0 meter Antenna Ku Band

Includes GPS antenna, power supply assembly, PCU enclosure assembly, hall effect sensor assembly, level cage assembly, modem pedestal (3 channel), modem base (3 channel, 75RF), dual channel Kelvin rotary joint (coaxial), belt kit, shielded polling relay assembly, level cage motor with wiring, polling pot assembly and foam-lined case. Recommended for MTN-G1.0-KT8D and MTN-

G1.0-KT8I. $ 8,274.35

132-8

MTN-G2.4-

CSP

Spares Kit for Seatel 9797-67,

2.4 meter Antenna C-Band

Includes GPS antenna, 10 foot RF cable assembly, C-Band Low Noise Block-down converter (LNB), Antenna Control Unit (ACU) motherboard assembly, level cage motor assembly with pulley, modem assembly base (3 channel, 50 ohm), pedestal modem assembly (3 channel, 50 ohm), modem assembly pedestal (3 channel, 50 ohm), diamond rotary joint (dual coaxial), modem assembly polling, pulley replacement hardware kit, DVB receiver assembly, polling pot assembly and foam-lined case. Recommended for MTN-G2.4S-CET80.

$ 8,632.77

132-8 MTN-GV-4A

Small ( 4 analog voice lines) C/Ku Band

Rack-mountable Voice Gateway with fast Ethernet port and 4 analog voice ports.

Enabling voice calls over C/Ku-Band Antenna Systems. $ 6,221.31

132-8

MTN-GV-

12A Medium (5-12 analog voice lines) C/Ku Band

Rack-mountable Voice Gateway with fast Ethernet port and 12 analog voice ports. Enabling voice calls over C/Ku-Band Antenna Systems. $ 8,657.20

132-8

MTN-GV-

1TE1

Large Digital T1( up to 30 voice lines) C/Ku Band

Rack-mountable Voice Gateway with fast Ethernet port and digital voice interface (T1/E1). Enabling voice calls over C/Ku-Band Antenna Systems. $ 13,160.47

132-8

MTN-GR-

1T1

Hardware for Terrestrial Backhaul to Customer Facility C/Ku Band Rack-mountable router with fast Ethernet and built-in T1 CSU module $ 10,671.94

MTNGS GS-35F-0194U Page 15

Name

Frequ Band Product Description

GSA Price

Satellite Services

132-8

MTN-GSC-

K64

DirectNet Americas Ku Band (64K CIR) Ku-Band

CONUS Ku-Band DirectNet Service. Service includes Duplex Bandwidth on Demand (BOD) circuit satellite space segment for 64Kbps Committed Information Rate (CIR) with burst capability to a Maximum Information Rate (MIR) of 128Kbps, uplink and downlink Ku-Band interfaces, teleport service for BOD, redundant, protected, with generator, UPS backup, 24 hour technician manned.

Includes Network Operations Center monitor and control 24x7x365. Internet access with one public, routable IP address provided. Data demarcation at MTN PoP. Price per month. $ 2,655.06

132-8

MTN-GSC-

K128

DirectNet Americas Ku Band (128K CIR) Ku-Band

CONUS Ku-Band DirectNet Service. Service includes Duplex Bandwidth on Demand (BOD) circuit satellite space segment for 128Kbps Committed Information Rate (CIR) with burst capability to a Maximum Information Rate (MIR) of 256Kbps, uplink and downlink Ku-Band interfaces, teleport service for BOD, redundant, protected, with generator, UPS backup, 24 hour technician manned. Includes Network Operations Center monitor and control 24x7x365.

Internet access with one public, routable IP address provided. Data demarcation at MTN PoP. Price per month. $ 3,566.25

132-8

MTN-GSC-

K256

DirectNet Americas Ku Band (256K CIR) Ku-Band

CONUS Ku-Band DirectNet Service. Service includes Duplex Bandwidth on Demand (BOD) circuit satellite space segment for 256Kbps Committed Information Rate (CIR) with burst capability to a Maximum Information Rate (MIR) of 384Kbps, uplink and downlink Ku-Band interfaces, teleport service for BOD, redundant, protected, with generator, UPS backup, 24 hour technician manned. Includes Network Operations Center monitor and control 24x7x365.

Internet access with one public, routable IP address provided. Data demarcation at MTN PoP. Price per month. $ 7,130.58

132-8

MTN-GSE-

K64 DirectNet Europe Ku Band (64K CIR) Ku-Band

European Ku-Band DirectNet Service. Service includes Duplex Bandwidth on Demand (BOD) circuit satellite space segment for 64Kbps Committed Information Rate (CIR) with burst capability to a Maximum Information Rate (MIR) of 128Kbps, uplink and downlink Ku-Band interfaces, teleport service for BOD, redundant, protected, with generator, UPS backup, 24 hour technician manned.

Includes Network Operations Center monitor and control 24x7x365. Internet access with one public, routable IP address provided. Data demarcation at MTN PoP. Price per month. $ 2,107.59

MTNGS GS-35F-0194U Page 16

Name

Frequ Band Product Description

GSA Price

132-8

MTN-GSE-

K128

DirectNet Europe Ku Band (128K CIR) Ku-Band

European Ku-Band DirectNet Service. Service includes Duplex Bandwidth on Demand (BOD) circuit satellite space segment for 128Kbps Committed Information Rate (CIR) with burst capability to a Maximum Information Rate (MIR) of 256Kbps, uplink and downlink Ku-Band interfaces, teleport service for BOD, redundant, protected, with generator, UPS backup, 24 hour technician manned. Includes Network Operations Center monitor and control 24x7x365.

Internet access with one public, routable IP address provided. Data demarcation at MTN PoP. Price per month. $ 2,836.92

132-8

MTN-GSE-

K256

DirectNet Europe Ku Band (256K CIR) Ku-Band

European Ku-Band DirectNet Service. Service includes Duplex Bandwidth on Demand (BOD) circuit satellite space segment for 256Kbps Committed Information Rate (CIR) with burst capability to a Maximum Information Rate (MIR) of 384Kbps, uplink and downlink Ku-Band interfaces, teleport service for BOD, redundant, protected, with generator, UPS backup, 24 hour technician manned. Includes Network Operations Center monitor and control 24x7x365.

Internet access with one public, routable IP address provided. Data demarcation at MTN PoP. Price per month. $ 5,673.84

132-8

MTN-GSA-

C64 DirectNet AOR C- Band (64K CIR) C-Band

Atlantic Ocean Regional C-Band DirectNet Service. Service includes Duplex Bandwidth on Demand (BOD) circuit satellite space segment for 64Kbps Committed Information Rate (CIR) with burst capability to a Maximum Information Rate (MIR) of 128Kbps, uplink and downlink Ku-Band interfaces, teleport service for BOD, redundant, protected, with generator, UPS backup, 24 hour technician manned. Includes Network Operations Center monitor and control 24x7x365. Internet access with one public, routable IP address provided.

Data demarcation at MTN PoP. Price per month. $ 2,890.52

MTNGS GS-35F-0194U Page 17

Name

Frequ Band Product Description

GSA Price

132-8

MTN-GSA-

C128 DirectNet AOR C- Band (128K CIR) C-Band

Atlantic Ocean Region C-Band DirectNet Service. Service includes Duplex Bandwidth on Demand (BOD) circuit satellite space segment for 128Kbps Committed Information Rate (CIR) with burst capability to a Maximum Information Rate (MIR) of 256Kbps, uplink and downlink Ku-Band interfaces, teleport service for BOD, redundant, protected, with generator, UPS backup, 24 hour technician manned. Includes Network Operations Center monitor and control 24x7x365. Internet access with one public, routable IP address provided.

Data demarcation at MTN PoP. Price per month. $ 3,878.27

132-8

MTN-GSA-

C256 DirectNet AOR C- Band (256K CIR) C-Band

Atlantic Ocean Region C-Band DirectNet Service. Service includes Duplex Bandwidth on Demand (BOD) circuit satellite space segment for 256Kbps Committed Information Rate (CIR) with burst capability to a Maximum Information Rate (MIR) of 384Kbps, uplink and downlink Ku-Band interfaces, teleport service for BOD, redundant, protected, with generator, UPS backup, 24 hour technician manned. Includes Network Operations Center monitor and control 24x7x365. Internet access with one public, routable IP address provided.

Data demarcation at MTN PoP. Price per month. $ 7,752.71

132-8

MTN-GSP-

C64 DirectNet POR C- Band (64K CIR) C-Band

Pacific Ocean Region C-Band DirectNet Service. Service includes Duplex Bandwidth on Demand (BOD) circuit satellite space segment for 64Kbps Committed Information Rate (CIR) with burst capability to a Maximum Information Rate (MIR) of 128Kbps, uplink and downlink Ku-Band interfaces, teleport service for BOD, redundant, protected, with generator, UPS backup, 24 hour technician manned. Includes Network Operations Center monitor and control 24x7x365. Internet access with one public, routable IP address provided.

Data demarcation at MTN PoP. Price per month. $ 5,340.76

MTNGS GS-35F-0194U Page 18

Name

Frequ Band Product Description

GSA Price

132-8

MTN-GSP-

C128 DirectNet POR C- Band (128K CIR) C-Band

Pacific Ocean Region C-Band DirectNet Service. Service includes Duplex Bandwidth on Demand (BOD) circuit satellite space segment for 128Kbps Committed Information Rate (CIR) with burst capability to a Maximum Information Rate (MIR) of 256Kbps, uplink and downlink Ku-Band interfaces, teleport service for BOD, redundant, protected, with generator, UPS backup, 24 hour technician manned. Includes Network Operations Center monitor and control 24x7x365. Internet access with one public, routable IP address provided.

Data demarcation at MTN PoP. Price per month. $ 7,142.07

132-8

MTN-GSP-

C256 DirectNet POR C- Band (256K CIR) C-Band

Pacific Ocean Region C-Band DirectNet Service. Service includes Duplex Bandwidth on Demand (BOD) circuit satellite space segment for 256Kbps Committed Information Rate (CIR) with burst capability to a Maximum Information Rate (MIR) of 384Kbps, uplink and downlink Ku-Band interfaces, teleport service for BOD, redundant, protected, with generator, UPS backup, 24 hour technician manned. Includes Network Operations Center monitor and control 24x7x365.