MAS - The Datatech Group. Inc. - GS35F0191M

Version 2.1 i

AUTHORIZED FEDERAL SUPPLY SERVICE

INFORMATION TECHNOLOGY SCHEDULE PRICELIST

GENERAL PURPOSE COMMERCIAL INFORMATION

TECHNOLOGY

EQUIPMENT, SOFTWARE AND SERVICES

SIN 132-51 - INFORMATION TECHNOLOGY (IT) PROFESSIONAL SERVICES

FPDS Code D302 IT Systems Development Services

FPDS Code D306 IT Systems Analysis Services

FPDS Code D307 Automated Information Systems Design and Integration Services

FPDS Code D308 Programming Services

FPDS Code D310 IT Backup and Security Services

FPDS Code D311 IT Data Conversion Services

FPDS Code D316 IT Network Management Services

FPDS Code D317 Automated News Services, Data Services, or Other Information Services

FPDS Code D399 Other Information Technology Services, Not Elsewhere Classified

Note 1: This solicitation is not intended to solicit for the reselling of IT Professional Services, except for the provision of implementation, maintenance, integration, or training services in direct support of a product. Under such circumstances the services must be performed by the publisher or manufacturer or one of their authorized agents.

807 West Highway 50, Suite 2

O Fallon, IL 62269 url: www.datatechgroup.com

Telephone: 618-632-4017

Fax: 618-632-4017

Contract Number: GS-35F-0191M

Period of Performance: January 10, 2017 to Jan 9, 2022

General Services Administration

Federal Supply Service

Pricelist current through Modification #P0-0016

On-line access to contract ordering information, terms and conditions, up-to-date pricing, and the option to create an electronic delivery order are available through GSA Advantage!®, a menu-driven database system. The INTERNET address GSA Advantage!® is: GSAAdvantage.gov.

http://www.datatechgroup.com/

Version 2.1 ii

Table of Contents

1 INFORMATION FOR ORDERING OFFICES

2 TERMS AND CONDITIONS

3 PRICELIST

PROFESSIONAL SERVICES (132-51)

LABOR CATEGORY DESCRIPTIONS

3.1.1 Staff Consultant

Experience Education Functional Responsibility Programming‡ Database Management Systems‡ Systems Analysis‡

3.1.2 Consultant

Experience Education Functional Responsibility Programming‡ Database Management Systems‡ Systems Analysis‡

3.1.3 Senior Consultant

Experience Education Functional Responsibility Programming‡ Database Management Systems‡ Systems Analysis‡

3.1.4 Industry Consultant

Experience Education Functional Responsibility

3.1.5 Project Manager

Experience Education Functional Responsibility‡

3.1.6 Senior Project Manager

Experience Education Functional Responsibility‡

3.1.7 Technical Writer

Experience Education Functional Responsibility

4 USA COMMITMENT TO PROMOTE SMALL BUSINESS PARTICIPATION

PROCUREMENT PROGRAMS

Version 2.1 iii

5 BEST VALUE BLANKET PURCHASE AGREEMENT FEDERAL SUPPLY SCHEDULE

6 BASIC GUIDELINES FOR USING “CONTRACTOR TEAM ARRANGEMENTS”

Version 2.1 iv

(This Page Intentionally Left Blank)

Version 2.1 1

1 INFORMATION FOR ORDERING OFFICES

SPECIAL NOTICE TO AGENCIES:

Small Business Participation

SBA strongly supports the participation of small business concerns in the Federal Supply Schedules

Program. To enhance Small Business Participation SBA policy allows agencies to include in their procurement base and goals, the dollar value of orders expected to be placed against the Federal Supply

Schedules, and to report accomplishments against these goals.

For orders exceeding the micro-purchase threshold, FAR 8.404 requires agencies to consider the catalogs/pricelists of at least three schedule contractors or consider reasonably available information by using the GSA Advantage! on-line shopping service (www.fss.gsa.gov). The catalogs/pricelists, GSA

Advantage! and the Federal Supply Service Home Page (www.fss.gsa.gov) contain information on a broad array of products and services offered by small business concerns.

This information should be used as a tool to assist ordering activities in meeting or exceeding established small business goals. It should also be used as a tool to assist in including small, small disadvantaged, and women-owned small businesses among those considered when selecting pricelists for a best value determination.

For orders exceeding the micro-purchase threshold, customers are to give preference to small business concerns when two or more items at the same delivered price will satisfy their requirement.

1. Geographic Scope of Contract:

This contract covers the 48 contiguous states, the District of Columbia, Alaska, Hawaii,

2. Contractor's Ordering Address and Payment Information:

(a). Ordering Address

The DataTech Group, Inc.

807 W HWY 50, Suite 2

O Fallon, IL 62269

Phone: 618-632-4016

(b). Payment Address

The DataTech Group, Inc.

807 W HWY 50, Suite 2

O Fallon, IL 62269

Phone: 618-632-4016

Contractors are required to accept the Government purchase card for payments equal to or less than the micro-purchase threshold for oral or written delivery orders. Government purchase cards will be acceptable for payment above the micro-purchase threshold. In addition, bank account information for wire transfer payments will be shown on the invoice.

The following telephone number(s) can be used by ordering agencies to obtain technical and/or ordering assistance:

618-632-4016 (v), 618-632-4017 (fax)

3. LIABILITY FOR INJURY OR DAMAGE

Version 2.1 2

The Contractor shall not be liable for any injury to Government personnel or damage to Government property arising from the use of equipment maintained by the Contractor, unless such injury or damage is due to the fault or negligence of the Contractor.

4. Statistical Data for Government Ordering Office Completion of Standard Form 279:

Block 9: G. Order/Modification Under Federal Schedule

Block 16: Data Universal Numbering System (DUNS) 071803758

Block 30: Type of Contractor - A. Small Business

Block 31: Woman-Owned Small Business - Yes

Block 36: Contractor's Taxpayer Identification Number (TIN) 58-237-0656

4a. CAGE Code: 1QBR3

4b. Contractor has registered with the System for Award Management (SAM).

5. FOB Destination

6. DELIVERY SCHEDULE

a. TIME OF DELIVERY: The Contractor shall deliver to destination within the number of calendar days after receipt of order (ARO), as set forth below:

SPECIAL ITEM

NUMBER

DELIVERY TIME

(Days ARO)

132-51 As agreed upon between DataTech and ordering agency

b. URGENT REQUIREMENTS: When the Federal Supply Schedule contract delivery period does not meet the bona fide urgent delivery requirements of an ordering agency, agencies are encouraged, if time permits, to contact the Contractor for the purpose of obtaining accelerated delivery. The Contractor shall replay to the inquiry within 3 workdays after receipt. (Telephonic replies shall be confirmed by the Contractor in writing.) If the Contractor offers an accelerated delivery time acceptable to the ordering agency, any order(s) placed pursuant to the agreed upon accelerated delivery time frame shall be delivered within this shorter delivery time and in accordance with all other terms and conditions of the contract.

7. Discounts: Prices shown are NET Prices; Basic Discounts have been deducted. IFF (Industrial

Funding Fee) is included in the NET Prices.

Government Educational Institutions are offered the same discounts as all other Government customers.

8. Trade Agreements Act of 1979, as amended:

All items are U.S. made end products, designated country end products, Caribbean Basin country end products, Canadian end products, or Mexican end products as defined in the Trade Agreements Act of

1979, as amended.

9. Statement Concerning Availability of Export Packing:

10. Small Requirements: The minimum dollar value of orders to be issued is $500.

11. Maximum Order (All dollar amounts are exclusive of any discount for prompt payment.)

a. The Maximum Order value for the following Special Item Numbers (SINs) 132-51 is $500,000:

Version 2.1 3

12. USE OF FEDERAL SUPPLY SERVICE INFORMATION TECHNOLOGY SCHEDULE

CONTRACTS. In accordance with FAR 8.404:

[NOTE: Special ordering proceedures have been established for Special Item Numbers (SINs) 132-

51 IT Professional Services and 132-52 EC Services; refer to the terms and conditions for those

SINs.]

Orders placed pursuant to a Multiple Award Schedule (MAS), using the procedures in FAR 8.404, are considered to be issued pursuant to full and open competition. Therefore, when placing orders under

Federal Supply Schedules, ordering offices need not seek further competition, synopsize the requirement, make a separate determination of fair and reasonable pricing, or consider small business set-asides in accordance with subpart 19.5. GSA has already determined the prices of items under schedule contracts to be fair and reasonable. By placing an order against a schedule using the procedures outlined below, the ordering office has concluded that the order represents the best value and results in the lowest overall cost alternative (considering price, special features, administrative costs, etc.) to meet the Government’s needs.

a. Orders placed at or below the micro-purchase threshold. Ordering offices can place orders at or below the micro-purchase threshold with any Federal Supply Schedule Contractor.

b. Orders exceeding the micro-purchase threshold but not exceeding the maximum order threshold.

Orders should be placed with the Schedule Contractor that can provide the supply or service that represents the best value. Before placing an order, ordering offices should consider reasonably available information about the supply or service offered under MAS contracts by using the “GSA Advantage!” on-line shopping service, or by reviewing the catalogs/pricelists of at least three Schedule Contractors and selecting the delivery and other options available under the schedule that meets the agency’s needs. In selecting the supply or service representing the best value, the ordering office may consider--

(1) Special features of the supply or service that are required in effective program performance and that are not provided by a comparable supply or service;

(2) Trade-in considerations;

(3) Probable life of the item selected as compared with that of a comparable item;

(4) Warranty considerations;

(5) Maintenance availability;

(6) Past performance; and

(7) Environmental and energy efficiency considerations.

c. Orders exceeding the maximum order threshold. Each schedule contract has an established maximum order threshold. This threshold represents the point where it is advantageous for the ordering office to seek a price reduction. In addition to following the procedures in paragraph b, above, and before placing an order that exceeds the maximum order threshold, ordering offices shall--

Review additional Schedule Contractors’

(1) catalogs/pricelists or use the “GSA Advantage!” on-line shopping service;

(2) Based upon the initial evaluation, generally seek price reductions from the Schedule

Contractor(s) appearing to provide the best value (considering price and other factors); and

(3) After price reductions have been sought, place the order with the Schedule Contractor that provides the best value and results in the lowest overall cost alternative. If further price reductions are not offered, an order may still be placed, if the ordering office determines that it is appropriate.

NOTE: For orders exceeding the maximum order threshold, the Contractor may:

(1) Offer a new lower price for this requirement (the Price Reductions clause is not applicable to orders placed over the maximum order in FAR 52.216-19 Order Limitations);

(2) Offer the lowest price available under the contract; or

Version 2.1 4

(3) Decline the order (orders must be returned in accordance with FAR 52.216-19).

d. Blanket purchase agreements (BPAs). The establishment of Federal Supply Schedule BPAs is permitted when following the ordering procedures in FAR 8.404. All schedule contracts contain BPA provisions. Ordering offices may use BPAs to establish accounts with Contractors to fill recurring requirements. BPAs should address the frequency of ordering and invoicing, discounts, and delivery locations and times.

e. Price reductions. In addition to the circumstances outlined in paragraph c, above, there may be instances when ordering offices will find it advantageous to request a price reduction. For example, when the ordering office finds a schedule supply or service elsewhere at a lower price or when a BPA is being established to fill recurring requirements, requesting a price reduction could be advantageous. The potential volume of orders under these agreements, regardless of the size of the individual order, may offer the ordering office the opportunity to secure greater discounts. Schedule Contractors are not required to pass on to all schedule users a price reduction extended only to an individual agency for a specific order.

f. Small business. For orders exceeding the micro-purchase threshold, ordering offices should give preference to the items of small business concerns when two or more items at the same delivered price will satisfy the requirement.

g. Documentation. Orders should be documented, at a minimum, by identifying the Contractor the item was purchased from, the item purchased, and the amount paid. If an agency requirement in excess of the micro-purchase threshold is defined so as to require a particular brand name, product, or feature of a product peculiar to one manufacturer, thereby precluding consideration of a product manufactured by another company, the ordering office shall include an explanation in the file as to why the particular brand name, product, or feature is essential to satisfy the agency’s needs.

13. FEDERAL INFORMATION TECHNOLOGY/TELECOMMUNICATION STANDARDS

REQUIREMENTS: Federal departments and agencies acquiring products from this Schedule must comply with the provisions of the Federal Standards Program, as appropriate (reference: NIST Federal

Standards Index). Inquiries to determine whether or not specific products listed herein comply with

Federal Information Processing Standards (FIPS) or Federal Telecommunication Standards (FED-STDS), which are cited by ordering offices, shall be responded to promptly by the Contractor.

13.1 FEDERAL INFORMATION PROCESSING STANDARDS PUBLICATIONS (FIPS

PUBS): Information Technology products under this Schedule that do not conform to Federal Information

Processing Standards (FIPS) should not be acquired unless a waiver has been granted in accordance with the applicable "FIPS Publication." Federal Information Processing Standards Publications (FIPS PUBS) are issued by the U.S. Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security Act. Information concerning their availability and applicability should be obtained from the National Technical Information Service (NTIS), 5285 Port Royal Road, Springfield, Virginia 22161. FIPS PUBS include voluntary standards when these are adopted for Federal use.

Individual orders for FIPS PUBS should be referred to the NTIS Sales Office, and orders for subscription service should be referred to the NTIS Subscription Officer, both at the above address, or telephone number

(703) 487-4650.

13.2 FEDERAL TELECOMMUNICATION STANDARDS (FED-STDS): Telecommunication products under this Schedule that do not conform to Federal Telecommunication Standards (FED-STDS) should not be acquired unless a waiver has been granted in accordance with the applicable "FED-STD."

Federal Telecommunication Standards are issued by the U.S. Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security Act. Ordering information and information concerning the availability of FED-STDS should be obtained from the GSA, Federal Supply

Service, Specification Section, 470 East L’Enfant Plaza, Suite 8100, SW, Washington, DC 20407, telephone number (202)619-8925. Please include a self-addressed mailing label when requesting information by mail. Information concerning their applicability can be obtained by writing or calling the

Version 2.1 5

U.S. Department of Commerce, National Institute of Standards and Technology, Gaithersburg, MD 20899, telephone number (301)975-2833.

14. SECURITY REQUIREMENTS. In the event security requirements are necessary, the ordering activities may incorporate, in their delivery orders, a security clause in accordance with current laws, regulations, and individual agency policy; however, the burden of administering the security requirements shall be with the ordering agency. If any costs are incurred as a result of the inclusion of security requirements, such costs will not exceed ten percent (10%) or $100,000, of the total dollar value of the order, whichever is less.

15. CONTRACT ADMINISTRATION FOR ORDERING OFFICES: Any ordering office, with respect to any one or more delivery orders placed by it under this contract, may exercise the same rights of termination as might the GSA Contracting Officer under provisions of FAR 52.212-4, paragraphs (l)

Termination for the Government’s convenience, and (m) Termination for Cause (See C.1.)

16. GSA Advantage!

GSA Advantage! is an on-line, interactive electronic information and ordering system that provides on-line access to vendors' schedule prices with ordering information. GSA Advantage! will allow the user to perform various searches across all contracts including, but not limited to:

(1) Manufacturer;

(2) Manufacturer's Part Number; and

(3) Product categories.

Agencies can browse GSA Advantage! by accessing the Internet World Wide Web utilizing a browser (ex.:

NetScape). The Internet address is http://www.gsaadvantage.gov/.

17. PURCHASE OF INCIDENTAL, NON-SCHEDULE ITEMS

For administrative convenience, open market (non-contract) items may be added to a Federal Supply

Schedule Blanket Purchase Agreement (BPA) or an individual order, provided that the items are clearly labeled as such on the order, all applicable regulations have been followed, and price reasonableness has been determined by the ordering activity for the open market (non-contract) items.

18. CONTRACTOR COMMITMENTS, WARRANTIES AND REPRESENTATIONS

a. For the purpose of this contract, commitments, warranties and representations include, in addition to those agreed to for the entire schedule contract:

(1) Time of delivery/installation quotations for individual orders;

(2) Technical representations and/or warranties of products concerning performance, total system performance and/or configuration, physical, design and/or functional characteristics and capabilities of a product/equipment/ service/software package submitted in response to requirements which result in orders under this schedule contract.

(3) Any representations and/or warranties concerning the products made in any literature, description, drawings and/or specifications furnished by the Contractor.

b. The above is not intended to encompass items not currently covered by the GSA Schedule contract.

19. OVERSEAS ACTIVITIES

Version 2.1 6

The terms and conditions of this contract shall apply to all orders for installation, maintenance and repair of equipment in areas listed in the pricelist outside the 48 contiguous states and the District of Columbia, except as indicated below:

NONE

Upon request of the Contractor, the Government may provide the Contractor with logistics support, as available, in accordance with all applicable Government regulations. Such Government support will be provided on a reimbursable basis, and will only be provided to the Contractor's technical personnel whose services are exclusively required for the fulfillment of the terms and conditions of this contract.

20. BLANKET PURCHASE AGREEMENTS (BPAs)

Federal Acquisition Regulation (FAR) 13.303-1(a) defines Blanket Purchase Agreements (BPAs) as “…a simplified method of filling anticipated repetitive needs for supplies or services by establishing ‘charge accounts’ with qualified sources of supply.” The use of Blanket Purchase Agreements under the Federal

Supply Schedule Program is authorized in accordance with FAR 13.303-2(c)(3), which reads, in part, as follows:

“BPAs may be established with Federal Supply Schedule Contractors, if not inconsistent with the terms of the applicable schedule contract.”

Federal Supply Schedule contracts contain BPA provisions to enable schedule users to maximize their administrative and purchasing savings. This feature permits schedule users to set up “accounts” with

Schedule Contractors to fill recurring requirements. These accounts establish a period for the BPA and generally address issues such as the frequency of ordering and invoicing, authorized callers, discounts, delivery locations and times. Agencies may qualify for the best quantity/volume discounts available under the contract, based on the potential volume of business that may be generated through such an agreement, regardless of the size of the individual orders. In addition, agencies may be able to secure a discount higher than that available in the contract based on the aggregate volume of business possible under a BPA.

Finally, Contractors may be open to a progressive type of discounting where the discount would increase once the sales accumulated under the BPA reach certain prescribed levels. Use of a BPA may be particularly useful with the new Maximum Order feature. See the Suggested Format, contained in this

Schedule Pricelist, for customers to consider when using this purchasing tool.

Version 2.1 7

21. CONTRACTOR TEAM ARRANGEMENTS

Contractors participating in contractor team arrangements must abide by all terms and conditions of their respective contracts. This includes compliance with Clauses 552.238-74, Contractor’s Reports of Sales and

552.238-76, Industrial Funding Fee, i.e., each contractor (team member) must report sales and remit the IFF for all products and services provided under its individual contract.

22. INSTALLATION, DEINSTALLATION, REINSTALLATION

The Davis-Bacon Act (40 U.S.C. 276a-276a-7) provides that contracts in excess of $2,000 to which the

United States or the District of Columbia is a party for construction, alteration, or repair (including painting and decorating) of public buildings or public works with the United States, shall contain a clausae that no laborer or mechanic employed directly upon the site of the work shall received less than the prevailing wage rates as determined by the Secretary of Labor. The requirements of the Davis-Bacon Act do not apply if the construction work is incidental to the furnishing of supplies, equipment, or services. For example, the requirements do not apply to simple installation or alteration of a public building or public work that is incidental to furnishing supplies or equipment under a supply contract. However, if the construction, alteration or repair is segregable and exceeds $2,000, then the requirements of the Davis-

Bacon Act applies.

The requisitioning activity issuing the task order against this contract will be responsible for proper administration and enforcement of the Federal labor standards covered by the Davis-Bacon Act. The proper Davis-Bacon wage determination will be issued by the ordering activity at the time a request for quotations is made for applicable construction classified installation, deinstallation, and reinstallation services under SIN 132-8.

23. SECTION 508 COMPLIANCE.

If applicable, Section 508 compliance information on the supplies and services in this contract are available in Electronic and Information Technology (EIT) at the following: N/A

The EIT standard can be found at: www.Section508.gov/.

http://www.section508.gov/

Version 2.1 8

2 TERMS AND CONDITIONS

APPLICABLE TO INFORMATION TECHNOLOGY (IT) PROFESSIONAL SERVICES (SPECIAL

ITEM NUMBER 132-51)

1. SCOPE

a. The prices, terms and conditions stated under Special Item Number 132-51 Information

Technology Professional Services apply exclusively to IT Services within the scope of this Information

Technology Schedule.

b. The Contractor shall provide services at the Contractor’s facility and/or at the Government location, as agreed to by the Contractor and the ordering office.

2. PERFORMANCE INCENTIVES

a. When using a performance based statement of work, performance incentives may be agreed upon between the Contractor and the ordering office on individual fixed price orders or Blanket Purchase

Agreements, for fixed price tasks, under this contract in accordance with this clause.

b. The ordering office must establish a maximum performance incentive price for these services and/or total solutions on individual orders or Blanket Purchase Agreements.

c. To the maximum extent practicable, ordering offices shall consider establishing incentives where performance is critical to the agency’s mission and incentives are likely to motivate the contractor.

Incentives shall be based on objectively measurable tasks.

d. The above procedures do not apply to Time and Material or labor hour orders.

3. ORDERING PROCEDURES FOR SERVICES (REQUIRING A STATEMENT OF

WORK)

FAR 8.402 contemplates that GSA may occasionally find it necessary to establish special ordering procedures for individual Federal Supply Schedules or for some Special Item Numbers (SINs) within a

Schedule. GSA has established special ordering procedures for services that require a Statement of Work.

These special ordering procedures take precedence over the procedures in FAR 8.404 (b)(2) through (b)(3).

GSA has determined that the prices for services contained in the contractor’s price list applicable to this

Schedule are fair and reasonable. However, the ordering office using this contract is responsible for considering the level of effort and mix of labor proposed to perform a specific task being ordered and for making a determination that the total firm-fixed price or ceiling price is fair and reasonable.

(a) When ordering services, ordering offices shall—

(1) Prepare a Request (Request for Quote or other communication tool):

(i) A statement of work (a performance-based statement of work is preferred) that outlines, at a minimum, the work to be performed, location of work, period of performance, deliverable schedule, applicable standards, acceptance criteria, and any special requirements (i.e., security clearances, travel, special knowledge, etc.) should be prepared.

(ii) The request should include the statement of work and request the contractors to submit either a firm-fixed price or a ceiling price to provide the services outlined in the statement of work. A firm-fixed price order shall be requested, unless the ordering office makes a determination that it is not possible at the time of placing the order to estimate accurately the extent or duration of the work or to anticipate cost with any reasonable degree of confidence. When such a determination is made, a labor hour or time-and-materials proposal may be requested. The firm-fixed price shall be based on the rates in

Version 2.1 9 the schedule contract and shall consider the mix of labor categories and level of effort required to perform the services described in the statement of work. The firm-fixed price of the order should also include any travel costs or other incidental costs related to performance of the services ordered, unless the order provides for reimbursement of travel costs at the rates provided in the Federal Travel or Joint Travel Regulations. A ceiling price must be established for labor-hour and time-and-materials orders.

(iii) The request may ask the contractors, if necessary or appropriate, to submit a project plan for performing the task, and information on the contractor’s experience and/or past performance performing similar tasks.

(iv) The request shall notify the contractors what basis will be used for selecting the contractor to receive the order. The notice shall include the basis for determining whether the contractors are technically qualified and provide an explanation regarding the intended use of any experience and/or past performance information in determining technical qualification of responses. If consideration will be limited to schedule contractors who are small business concerns as permitted by paragraph (2)(i) below, the request shall notify the contractors that will be the case.

(2) Transmit the Request to Contractors:

(i) Based upon an initial evaluation of catalogs and price lists, the ordering office should identify the contractors that appear to offer the best value (considering the scope of services offered, pricing and other factors such as contractors’ locations, as appropriate). When buying IT professional services under SIN 132—51 ONLY, the ordering office, at its discretion, may limit consideration to those schedule contractors that are small business concerns. This limitation is not applicable when buying supplies and/or services under other SINs as well as SIN 132-51. The limitation may only be used when at least three (3) small businesses that appear to offer services that will meet the agency’s needs are available, if the order is estimated to exceed the micro-purchase threshold.

(ii) The request should be provided to three (3) contractors if the proposed order is estimated to exceed the micro-purchase threshold, but not exceed the maximum order threshold. For proposed orders exceeding the maximum order threshold, the request should be provided to additional contractors that offer services that will meet the agency’s needs. Ordering offices should strive to minimize the contractors’ costs associated with responding to requests for quotes for specific orders. Requests should be tailored to the minimum level necessary for adequate evaluation and selection for order placement. Oral presentations should be considered, when possible.

(3) Evaluate Responses and Select the Contractor to Receive the Order:

After responses have been evaluated against the factors identified in the request, the order should be placed with the schedule contractor that represents the best value. (See FAR 8.404)

(b) The establishment of Federal Supply Schedule Blanket Purchase Agreements (BPAs) for recurring services is permitted when the procedures outlined herein are followed. All BPAs for services must define the services that may be ordered under the BPA, along with delivery or performance time frames, billing procedures, etc. The potential volume of orders under BPAs, regardless of the size of individual orders, may offer the ordering office the opportunity to secure volume discounts. When establishing BPAs, ordering offices shall—

(1) Inform contractors in the request (based on the agency’s requirement) if a single BPA or multiple BPAs will be established, and indicate the basis that will be used for selecting the contractors to be awarded the BPAs.

(i) SINGLE BPA: Generally, a single BPA should be established when the ordering office can define the tasks to be ordered under the BPA and establish a firm-fixed price or ceiling price for individual tasks or services to be ordered. When this occurs, authorized users may place the order directly under the established BPA when the need for service

Version 2.1 10 arises. The schedule contractor that represents the best value should be awarded the BPA.

(See FAR 8.404)

(ii) MULTIPLE BPAs: When the ordering office determines multiple BPAs are needed to meet its requirements, the ordering office should determine which contractors can meet any technical qualifications before establishing the BPAs. When multiple

BPAs are established, the authorized users must follow the procedures in (a)(2)(ii) above and then place the order with the Schedule contractor that represents the best value.

(2) Review BPAs Periodically: Such reviews shall be conducted at least annually. The purpose of the review is to determine whether the BPA still represents the best value. (See FAR

8.404)

(c) The ordering office should give preference to small business concerns when two or more contractors can provide the services at the same firm-fixed price or ceiling price.

(d) When the ordering office’s requirement involves both products as well as executive, administrative and/or professional, services, the ordering office should total the prices for the products and the firm-fixed price for the services and select the contractor that represents the best value. (See FAR

8.404)

The ordering office, at a minimum, should document orders by identifying the contractor from which the services were purchased, the services purchased, and the amount paid. If other than a firm-fixed price order is placed, such documentation should include the basis for the determination to use a labor-hour or time-and-materials order. For agency requirements in excess of the micro-purchase threshold, the order file should document the evaluation of Schedule contractors’ quotes that formed the basis for the selection of the contractor that received the order and the rationale for any trade-offs made in making the selection.

Ordering procedures for other services available on schedule at fixed prices for specifically defined services or tasks should use the procedures in FAR 8.404. These procedures are listed in the pricelist, under “Information for Ordering Offices,” paragraph #12.

4. ORDER

a. Agencies may use written orders, EDI orders, blanket purchase agreements, individual purchase orders, or task orders for ordering services under this contract. Blanket Purchase Agreements shall not extend beyond the end of the contract period; all services and delivery shall be made and the contract terms and conditions shall continue in effect until the completion of the order. Orders for tasks which extend beyond the fiscal year for which funds are available shall include FAR 52.232-19 Availability of Funds for the Next Fiscal Year. The purchase order shall specify the availability of funds and the period for which funds are available.

b. All task orders are subject to the terms and conditions of the contract. In the event of conflict between a task order and the contract, the contract will take precedence.

5. PERFORMANCE OF SERVICES

a. The Contractor shall commence performance of services on the date agreed to by the Contractor and the ordering office.

b. The Contractor agrees to render services only during normal working hours, unless otherwise agreed to by the Contractor and the ordering office.

c. The Agency should include the criteria for satisfactory completion for each task in the Statement of Work or Delivery Order. Services shall be completed in a good and workmanlike manner.

d. Any Contractor travel required in the performance of IT Services must comply with the Federal

Travel Regulation or Joint Travel Regulations, as applicable, in effect on the date(s) the travel is performed.

Established Federal Government per diem rates will apply to all Contractor travel. Contractors cannot use

GSA city pair contracts.

Version 2.1 11

6. INSPECTION OF SERVICES

The Inspection of Services–Fixed Price (AUG 1996) clause at FAR 52.246-4 applies to firm-fixed price orders placed under this contract. The Inspection–Time-and-Materials and Labor-Hour (JAN 1986) clause at FAR 52.246-6 applies to time-and-materials and labor-hour orders placed under this contract.

7. RESPONSIBILITIES OF THE CONTRACTOR

The Contractor shall comply with all laws, ordinances, and regulations (Federal, State, City, or otherwise) covering work of this character. If the end product of a task order is software, then FAR 52.227-14 Rights in Data – General, may apply.

8. RESPONSIBILITIES OF THE GOVERNMENT

Subject to security regulations, the ordering office shall permit Contractor access to all facilities necessary to perform the requisite IT Services.

9. INDEPENDENT CONTRACTOR

All IT Services performed by the Contractor under the terms of this contract shall be as an independent

Contractor, and not as an agent or employee of the Government.

10. ORGANIZATIONAL CONFLICTS OF INTEREST

a. Definitions.

“Contractor” means the person, firm, unincorporated association, joint venture, partnership, or corporation that is a party to this contract.

“Contractor and its affiliates” and “Contractor or its affiliates” refers to the Contractor, its chief executives, directors, officers, subsidiaries, affiliates, subcontractors at any tier, and consultants and any joint venture involving the Contractor, any entity into or with which the Contractor subsequently merges or affiliates, or any other successor or assignee of the Contractor.

An “Organizational conflict of interest” exists when the nature of the work to be performed under a proposed Government contract, without some restriction on activities by the Contractor and its affiliates, may either (i) result in an unfair competitive advantage to the Contractor or its affiliates or (ii) impair the

Contractor’s or its affiliates’ objectivity in performing contract work.

b. To avoid an organizational or financial conflict of interest and to avoid prejudicing the best interests of the Government, ordering offices may place restrictions on the Contractors, its affiliates, chief executives, directors, subsidiaries and subcontractors at any tier when placing orders against schedule contracts. Such restrictions shall be consistent with FAR 9.505 and shall be designed to avoid, neutralize, or mitigate organizational conflicts of interest that might otherwise exist in situations related to individual orders placed against the schedule contract. Examples of situations, which may require restrictions, are provided at FAR 9.508.

11 INVOICES

The Contractor, upon completion of the work ordered, shall submit invoices for IT services. Progress payments may be authorized by the ordering office on individual orders if appropriate. Progress payments shall be based upon completion of defined milestones or interim products. Invoices shall be submitted monthly for recurring services performed during the preceding month.

Version 2.1 12

12. PAYMENTS

For firm-fixed price orders the Government shall pay the Contractor, upon submission of proper invoices or vouchers, the prices stipulated in this contract for service rendered and accepted. Progress payments shall be made only when authorized by the order. For time-and-materials orders, the Payments under

Time-and-Materials and Labor-Hour Contracts (Alternate I (APR 1984)) at FAR 52.232-7 applies to time-and-materials orders placed under this contract. For labor-hour orders, the Payment under

Time-and-Materials and Labor-Hour Contracts (FEB 1997) (Alternate II (JAN 1986)) at FAR 52.232-7 applies to labor-hour orders placed under this contract.

13. RESUMES

Resumes shall be provided to the GSA Contracting Officer or the user agency upon request.

14. INCIDENTAL SUPPORT COSTS

Incidental support costs are available outside the scope of this contract. The costs will be negotiated separately with the ordering agency in accordance with the guidelines set forth in the FAR.

15. APPROVAL OF SUBCONTRACTS

The ordering activity may require that the Contractor receive, from the ordering activity's Contracting

Officer, written consent before placing any subcontract for furnishing any of the work called for in a task order.

16. DESCRIPTION OF IT SERVICES AND PRICING

a. The Contractor shall provide a description of each type of IT Service offered under Special Item

Numbers 132-51. IT Services should be presented in the same manner as the Contractor sells to its commercial and other Government customers. If the Contractor is proposing hourly rates, a description of all corresponding commercial job titles (labor categories) for those individuals who will perform the service should be provided.

b. Pricing for all IT Services shall be in accordance with the Contractor’s customary commercial practices; e.g., hourly rates, monthly rates, term rates, and/or fixed prices.

Version 2.1 13

3 PRICELIST

PROFESSIONAL SERVICES (132-51)

AS A SOLUTION PROVIDER:

The following hourly rates apply across all IT product ID’s, where The DataTech Group or its consultants are responsible for one or more client or end program deliverables.

2016 GSA Hourly Rates

Staff Consultant $175.72

Consultant $219.76

Senior Consultant $243.67

Technical Writer $84.53

Additional discounts are available based on following volume:

Volume (in Service Hours) Discount Code/Description Additional discount

Less than 924 hours per year Basic Engagement (BASIC) 0 % discount

924 – 1848 hours per year 6 Month Engagement (6MNTH) 5% discount

Greater than 1848 hours per year 12 Month Engagement (12MNTH) 15% discount

AS A STAFF AUGMENTATION PROVIDER:

This service is currently not available under GSA Schedule.

Version 2.1 14

LABOR CATEGORY DESCRIPTIONS

3.1.1 Staff Consultant

Experience

Less than 5 years of systems analysis, database management OR programming experience.

Education

BS/BA-CS, CIS, Engineering, Math

Functional Responsibility

Experience with one OR more of the following skill sets‡:

Programming‡

1. Able to code from program specifications or low-level design documents. Able to prepare component designs from general requirements statements. Able to develop component test cases and scenarios and execute application tests at the unit level.

Able to develop design documentation at the component level and prepare program documentation

2. Working knowledge of operating system concepts and familiarity with several operating environments. Understands principles of design and code inspection techniques, group design sessions and code walk-throughs. Familiar with several programming languages with expert knowledge in one. Able to estimate and plan own work at a task level and report work progress

3. Able to diagnose application problems and identify appropriate fixes. Familiar with general-purpose utilities and editors. Able to debug and repair flowcharts.

4. Able to work independently at the task level. Participates in a project team environment. Coordinates and interfaces with other team members

5. Knowledge and experience of web related technologies.

Database Management Systems‡

1. Skilled in data dictionary analysis and design as well as operational processes such as backup and restore functions. Able to establish and document data standards. Able to maintain central data repository. Basic skills in dictionary analysis and maintenance functions.

2. Able to support application systems development life cycle and participate in the design and development of database components.

3. Working knowledge of at least one industry standard database development tool.

Systems Analysis‡

1. Able to utilize established fact finding approaches in collecting data for analysis.

Good knowledge of pertinent work processes and procedures. Familiarity with related computer programming practices, system software, computer equipment, work processes, and applicable regulations. Requires competence in most phases of system analysis.

Labor Category description: Staff Consultant (continued)

Version 2.1 15

2. Able to analyze data, compare alternatives in terms of cost, time, availability of equipment/personnel and recommend alternative courses of action. Able to prepare specs for development of computer programs. Able to determine and resolve data processing problems and coordinate work plans. Able to adapt design approaches used successfully in precedent systems. Able to research routine user problems and solve by modifying existing systems. Able to work independently under overall project objectives and requirements. Able to adapt guides to specific situations and resolve problems and deviations according to established practices.

3. For moderately complex assignments, able to recognize probable interactions of related computer systems and predict impact of change on assigned system. For larger or more complex assignments, able to assist a more senior systems analyst by preparing detailed specifications.

4. Able to work in a project team environment or independently. May be required to supervise and give direction to technicians.

Version 2.1 16

3.1.2 Consultant

Experience

5 to 10 years of systems analysis, database management or programming experience.

Previous experience with Data Warehouse development a plus.

Education

BS/BA-CS, CIS, Engineering, Math

Functional Responsibility

1. Experience with Programming OR Database Management Systems

2. Experience with Systems Analysis

Programming‡

1. Able to perform all duties specified for Staff Consultant Programming skills.

2. Able to prepare application requirements from user input and prepare system documentation. Able to plan development effort by component and phase and estimate work for a small team. Able to lead a small team and report team’s work progress at a phase level.

3. Able to create and execute system level test plans and design drivers to test integrated modules. Familiar and proficient with several programming languages and operating systems. Able to lead group design sessions and code walkthroughs at the component level. Sound knowledge of application methodologies and processes.

4. Able to provide debugging, problem determination and system tuning assistance to application developers.

5. Able to provide assistance and training to junior team members. Able to be accountable for moderately complex technical directions to a small group of programmers.

6. Routine contacts with programmers outside the core programming team. Has proven leadership experience

7. Knowledge and experience of web related technologies.

Database Management Systems‡

1. Able to perform all duties of Staff Consultant Database Management skills.

2. Experience with business systems analysis and design, logical data modeling techniques and productivity tools and software. Knowledgeable of data analysis, DBMS and database management techniques.

3. Working knowledge of several industry standard database tools.

4. Able to work as a lead on the database component of an application development project. Able to mentor more junior staff. Able to provide some technical leadership on database issues.

Systems Analysis‡

1. Able to perform all duties specified for Staff Consultant Systems Analysis skills.

Labor Category description: Consultant (continued)

Version 2.1 17

2. Able to apply systems analysis in design techniques to complex computer systems in a broad area. Competent in all phases of systems analysis techniques, concepts and methods.

3. Able to recognize probable conflicts in integrating diverse data sources. Able to produce innovative solutions for a variety of complex problems. Maintains and modifies complex systems or develops new subsystems. Guides users in formulating requirements. Able to advice on alternatives and implications of new/revised data processing systems.

4. Able to analyze project proposals and identify omissions or errors in requirements. Conducts feasibility studies. Recommends optimum approach and develops system design.

5. Able to lead a small project or major component of a large project. Able to provide functional direction and technical assistance to junior staff. Able to serve as lead analyst in a design subgroup.

Version 2.1 18

3.1.3 Senior Consultant

Experience

More than 10 years of systems analysis, database management and programming experience. Must have a previous data warehouse experience

Education

BS/BA-CS, CIS, Engineering, Math

Functional Responsibility

Experience with Programming, Database Management Systems and Systems Analysis

Programming‡

1. Able to perform all duties specified for Staff Consultant Programmer skills.

2. Able to assume complete responsibility for a project or major task. Able to conceive, analyze and design data processing systems. Able to perform feasibility studies, system and requirements analysis, external and internal systems design. Able to manage software development and implementation projects.

3. Able to offer "expert" (extensive knowledge) answers in their area of expertise.

Analyze and recommend data processing system solutions in areas of specialty.

Sufficient general expertise to provide in-depth system wide support and consulting. Able to perform complex system diagnosis, problem determination and problem-source-identification.

4. Able to provide technical direction to a group of programmers and lead and direct a large development team.

5. Knowledge and experience of web related technologies.

Database Management Systems‡

1. Able to perform all duties of Staff Consultant Database Management skills.

2. Highly skilled in database design, installation and conversion. Able to define database backup and recovery procedures, access security, database integrity controls, data storage and management.

3. Able to assess and recommend a DBMS product. Skilled in maintaining database performance and tuning. Knowledge of a wide variety of database technologies and DBMS products.

4. Able to manage the technical components of a database project. Able to consult and provide technical leadership on all aspects of data analysis, modeling, design and conversion/migration.

Version 2.1 19

Labor Category description: Senior Consultant (continued)

Systems Analysis‡

1. Able to perform all duties specified for Staff Consultant Systems Analysis skills.

2. Able to apply expert systems analysis and design techniques to complex systems development in a specialized area. Broad knowledge of data sources/flow, interactions of complex systems, capabilities/limitations of systems software and computer equipment.

3. As team or project leader, able to guide development in broad unprecedented computer systems, devise completely new ways to locate/develop data sources, establish new factors/criteria for subject matter decisions and coordinate fact finding, analysis, design of systems. Able to provide systems design in a specialized design area, establish framework of new computer systems from feasibility studies to post implementation evaluation, devise new sources of data and develop new approaches/ techniques and serve as technical authority for a design area.

4. As a staff specialist, able to plan and conduct analyzes of unique problems in a broad system, prepare overall project recommendations, determine a design strategy, design and monitor testing and implementation plans, study broad areas of projected work processes which cut across systems and conduct continuing review of computer technological developments applicable to system design. Able to prepare long range forecasts for analysis and design issues.

5.…