Federal Supply Schedule GS35F0152N

Authorized Information Technology Schedule Pricelist General Purpose Commercial Information Technology Equipment, Software and Services

General Description of the Commodities and Services Offered Application SIN, FSC Classes and FPDS Codes

DESCRIPTION FSC CLASS/FPDS CODE

SIN 132-51 Information Technology Professional Services

D301, D302, D306, D308, D311, D316, D399

Note 1: All non-professional labor categories must be incidental to and used solely to support hardware, software and/or professional services, and cannot be purchased separately.

Note 2: Offerors and Agencies are advised that the Group 70 – Information Technology Schedule is not to be used as a means to procure services which properly fall under the Brooks Act. These services include, but are not limited to, architectural, engineering, mapping, cartographic production, remote sensing, geographic information systems, and related services. FAR 36.6 distinguishes between mapping services of an A/E nature and mapping services which are not connected nor incidental to the traditionally accepted A/E Services.

Note 3: This solicitation is not intended to solicit for the reselling of IT Professional Services, except for the provision of implementation, maintenance, integration, or training services in direct support of a product. Under such circumstances the services must be performance by the publisher or manufacturer or one of their authorized agents.

SRA International, Inc.

4300 Fair Lakes Court

Fairfax, Virginia 22033-4232 Phone: (703) 803-1500

Fax: (703) 803-1509 e-mail: schedules@sra.com SRA Website: www.sra.com

Business Size: Large

Contract Number: GS-35F-0152N Period Covered by Contract: December 4, 2002 through June 1, 2013

General Services Administration Federal Acquisition Service Pricelist current through Modification #PA-0035 effective April 22, 2013 Products and ordering information in this Authorized Information Technology Schedule Pricelist are also available on the GSA Advantage! System (http://www.gsaadvantage.gov).

Table of Contents Information for Ordering Activities Special Notice to Agencies Small Business Participation

1. Geographic Scope of Contract

2. Contractor’s Ordering Address and Payment Information

3. Liability for Injury or Damage

4. Statistical Data for Government Ordering Office Completion of Standard Form 279

5. FOB Destination

6. Delivery Schedule

7. Discounts

8. Trade Agreements Act of 1979, as amended

9. Statement Concerning Availability of Export Packing

10. Small Requirements

11. Maximum Order

12. Use of Federal Acquisition Service Information Technology Schedule Contracts. In Accordance with

FAR 8.404

13. Federal Information Technology/Telecommunication Standards Requirements 13.1.Federal Information Processing Standards Publications (FIPS Pubs) 13.2.Federal Telecommunication Standards (Fed-Stds)

14. Contractor Tasks/Special Requirements

15. Contract Administration For Ordering Activities

16. GSA Advantage!

17. Purchase of Open Market Items

18. Contractor Commitments, Warranties and Representations

19. Overseas Activities

20. Blanket Purchase Agreements (BPAs)

21. Contractor Team Arrangements

22. Installation, Deinstallation, Reinstallation

23. Section 508 Compliance

24. Prime Contractor Ordering From Federal Supply Schedules

25. Insurance – Work on a Government Installation

26. Software Interoperability

27. Advance Payments

TERMS AND CONDITIONS APPLICABLE TO INFORMATION TECHNOLOGY (IT) PROFESSIONAL

SERVICES (SIN 132-51)

1. Scope

2. Performance Incentives

3. Order

4. Performance of Services

5. Stop-Work Order

6. Inspection of Services

7. Responsibilities of SRA International, Inc

8. Responsibilities of the Ordering Activity

9. Independent Contractor

10. Organizational Conflicts of Interest

11. Invoices

12. Payments

13. Resumes

14. Incidental Support Costs

15. Approval of Subcontracts

16. Description of IT Services 16A.Overview 16B.Professional Services Pricing 16C.Description of IT Services

USA COMMITMENT TO PROMOTE SMALL BUSINESS PARTICIPATION PROCUREMENT

PROGRAMS

BEST VALUE BLANKET PURCHASE AGREEMENT FEDERAL ACQUISITION SERVICE SCHEDULE 18

BLANKET PURCHASE AGREEMENT

BASIC GUIDELINES FOR USING “CONTRACTOR TEAM ARRANGEMENTS

Information for Ordering Activities

SPECIAL NOTICE TO AGENCIES: Small Business Participation SBA strongly supports the participation of small business concerns in the Federal Acquisition Service. To enhance Small Business Participation SBA policy allows agencies to include in their procurement base and goals, the dollar value of orders expected to be placed against the Federal Supply Schedules, and to report accomplishments against these goals.

For orders exceeding the micropurchase threshold, FAR 8.404 requires agencies to consider the catalogs/pricelists of at least three schedule contractors or consider reasonably available information by using the GSA Advantage! on-line shopping service (www.gsaadvantage.gov). The catalogs/pricelists, GSA Advantage! and the Federal Acquisition Service Home Page (www.gsa.gov/fas) contain information on a broad array of products and services offered by small business concerns.

This information should be used as a tool to assist ordering activities in meeting or exceeding established small business goals. It should also be used as a tool to assist in including small, small disadvantaged, and women-owned small businesses among those considered when selecting pricelists for a best value determination.

For orders exceeding the micropurchase threshold, customers are to give preference to small business concerns when two or more items at the same delivered price will satisfy their requirement.

1. Geographic Scope of Contract Domestic delivery is delivery within the 48 contiguous states, Alaska, Hawaii, Puerto Rico, Washington, DC, and U.S. Territories. Domestic delivery also includes a port or consolidation point, within the aforementioned areas, for orders received from overseas activities.

Overseas delivery is delivery to points outside of the 48 contiguous states, Washington, DC, Alaska, Hawaii, Puerto Rico, and U.S. Territories.

Offerors are requested to check one of the following boxes:

[X] The Geographic Scope of Contract will be domestic and overseas delivery.

[ ] The Geographic Scope of Contract will be overseas delivery only.

[ ] The Geographic Scope of Contract will be domestic delivery only.

2. Ordering Address and Payment Information:

SRA International, Inc.

Attn: Accounts Receivable P.O. Box 742213 Atlanta, GA 30374-2213

Payment Information: Contractor must accept the credit card for payments equal to or less than the micro-purchase for oral or written orders under this contract. The Contractor and the ordering agency may agree to use the credit card for dollar amounts over the micro-purchase threshold (See GSAR 552.232-79 Payment by Credit Card). In addition, bank account information for wire transfer payments will be shown on the invoice.

The following telephone number(s) can be used by ordering agencies to obtain technical and/or ordering assistance:

Ordering Phone Number: (703) 502-1232

FAX: (703) 803-1509

3. Liability for Injury or Damage The Contractor shall not be liable for any injury to ordering activity personnel or damage to ordering activity property arising from the use of equipment maintained by the Contractor, unless such injury or damage is due to the fault or negligence of the Contractor.

4. Statistical Data for Government Ordering Office Completion of Standard Form 279 Block 9: G. Order/Modification Under Federal Schedule Block 16: Data Universal Numbering System (DUNS) Number: 00-704-3933

Block 30: Type of Contractor – C. Large Business Block 31: Woman-Owned Small Business - No Block 36: Contractor's Taxpayer Identification Number: 54-1959254 4a. CAGE Code – 1UYN9 4b. SRA International, Inc. is registered in the System for Award Management (SAM) database.

5. FOB Destination FOB Destination available in continental US only.

6. Delivery Schedule

a. TIME OF DELIVERY: The contractor shall deliver to destination within the number of calendar days after receipt of order (ARO), as negotiated between the ordering agency and SRA International, Inc.

Expedited Delivery Time: Expedited deliveries will be addressed on a case-by-case basis.

Overnight and 2-Day Delivery Times: Schedule customers may require overnight or two-day delivery.

Contact SRA International, Inc. to check on the availability of personnel to fulfill the service.

b. URGENT REQUIREMENTS: When the Federal Acquisition Service Schedule contract delivery period does not meet the bona fide urgent delivery requirements of an ordering agency, agencies are encouraged, if time permits, to contact SRA International, Inc. for the purpose of obtaining accelerated delivery. SRA International, Inc. shall reply to the inquiry within 3 workdays after receipt. (Telephonic replies shall be confirmed by SRA International, Inc. in writing.) If SRA International, Inc. offers an accelerated delivery time acceptable to the ordering agency, any order(s) placed pursuant to the agreed upon accelerated delivery time frame shall be delivered within this shorter delivery time and in accordance with all other terms and conditions of the contract.

7. Discounts Prices shown are NET Prices; Basic Discounts have been applied.

a. Prompt Payment: None

b. Quantity: None

c. Dollar Volume: None

d. Other Special Discounts (i.e. Government Education Discounts, etc.): None

8. Trade Agreements Act of 1979, as amended All items are U.S. made end products, designated country end products, Caribbean Basin country end products, Canadian end products, or Mexican end products as defined in the Trade Agreements Act of 1979, as amended.

9. Statement Concerning Availability of Export Packing: None.

10. Small Requirements: The minimum dollar value of orders to be issued is $100.00.

11. Maximum Order (All dollar amounts are exclusive of any discount for prompt payment.)

SIN 132-51 - 51—Information Technology Professional Services: The maximum dollar value per order for all IT Professional Services will be $500,000.

12. Use of Federal Acquisition Service Information Technology Schedule Contracts. In Accordance With FAR 8.404:

Ordering activities shall use the ordering procedures of Federal Acquisition Regulation (FAR) 8.405 when placing an order or establishing a BPA for supplies or services. These procedures apply to all schedules.

a. FAR 8.405-1 Ordering procedures for supplies, and services not requiring a statement of work.

b. FAR 8.405-2 Ordering procedures for services requiring a statement of work.

13. Federal Information Technology/Telecommunication Standards Requirements Federal departments and agencies acquiring products from this Schedule must comply with the provisions of the Federal Standards Program, as appropriate (reference: NIST Federal Standards Index).

Inquiries to determine whether or not specific products listed herein comply with Federal Information

Processing Standards (FIPS) or Federal Telecommunication Standards (FED-STDS), which are cited by ordering activities, shall be responded to promptly by the Contractor.

13.1 Federal Information Processing Standards Publications (FIPS PUBs) Information Technology products under this Schedule that do not conform to Federal Information Processing Standards (FIPS) should not be acquired unless a waiver has been granted in accordance with the applicable "FIPS Publication." Federal Information Processing Standards Publications (FIPS PUBS) are issued by the U.S. Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security Act. Information concerning their availability and applicability should be obtained from the National Technical Information Service (NTIS), 5285 Port Royal Road, Springfield, Virginia 22161. FIPS PUBS include voluntary standards when these are adopted for Federal use.

Individual orders for FIPS PUBS should be referred to the NTIS Sales Office, and orders for subscription service should be referred to the NTIS Subscription Officer, both at the above address, or telephone number (703) 487-4650.

13.2 Federal Telecommunication Standards (FED-STDs)

Telecommunication products under this Schedule that do not conform to Federal Telecommunication Standards (FED-STDS) should not be acquired unless a waiver has been granted in accordance with the applicable "FED-STD." Federal Telecommunication Standards are issued by the U.S. Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security Act.

Ordering information and information concerning the availability of FED-STDS should be obtained from the GSA, Federal Acquisition Service, Specification Section, 470 East L’Enfant Plaza, Suite 8100, SW, Washington, DC 20407, telephone number (202) 619-8925. Please include a self-addressed mailing label when requesting information by mail. Information concerning their applicability can be obtained by writing or calling the U.S. Department of Commerce, National Institute of Standards and Technology, Gaithersburg, MD 20899, telephone number (301) 975-2833.

14. Contractor Tasks/Special Requirements (C-FSS-370) (NOV 2001)

(a) Security Clearances: The Contractor may be required to obtain/possess varying levels of security clearances in the performance of orders issued under this contract. All costs associated with obtaining/possessing such security clearances should be factored into the price offered under the Multiple Award Schedule.

(b) Travel: The Contractor may be required to travel in performance of orders issued under this contract.

Allowable travel and per diem charges are governed by Pub .L. 99-234 and FAR Part 31, and are reimbursable by the ordering agency or can be priced as a fixed price item on orders placed under the Multiple Award Schedule. The Industrial Funding Fee does NOT apply to travel and per diem charges.

NOTE: Refer to FAR Part 31.205-46 Travel Costs, for allowable costs that pertain to official company business travel in regards to this contract.

(c) Certifications, Licenses and Accreditations: As a commercial practice, the Contractor may be required to obtain/possess any variety of certifications, licenses and accreditations for specific FSC/service code classifications offered. All costs associated with obtaining/ possessing such certifications, licenses and accreditations should be factored into the price offered under the Multiple Award Schedule program.

(d) Insurance: As a commercial practice, the Contractor may be required to obtain/possess insurance coverage for specific FSC/service code classifications offered. All costs associated with obtaining/possessing such insurance should be factored into the price offered under the Multiple Award Schedule program.

(e) Personnel: The Contractor may be required to provide key personnel, resumes or skill category descriptions in the performance of orders issued under this contract. Ordering activities may require agency approval of additions or replacements to key personnel.

(f) Organizational Conflicts of Interest: Where there may be an organizational conflict of interest as determined by the ordering agency, the Contractor’s participation in such order may be restricted in accordance with FAR Part 9.5.

(g) Documentation/Standards: The Contractor may be requested to provide products or services in accordance with rules, regulations, OMB orders, standards and documentation as specified by the agency’s order.

(h) Data/Deliverable Requirements: Any required data/deliverables at the ordering level will be as specified or negotiated in the agency’s order.

(i) Government-Furnished Property: As specified by the agency’s order, the Government may provide property, equipment, materials or resources as necessary.

(j) Availability of Funds: Many Government agencies’ operating funds are appropriated for a specific fiscal year. Funds may not be presently available for any orders placed under the contract or any option year. The Government’s obligation on orders placed under this contract is contingent upon the availability of appropriated funds from which payment for ordering purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are available to the ordering Contracting Officer.

15. Contract Administration for Ordering Activities Any ordering office, with respect to any one or more delivery orders placed by it under this contract, may exercise the same rights of termination as might the GSA Contracting Officer under provisions of FAR 52.212-4, paragraphs (l) Termination for the Government’s convenience, and (m) Termination for Cause (See C.1.)

16. GSA Advantage!

GSA Advantage! is an on-line, interactive electronic information and ordering system that provides on-line access to vendors' schedule prices with ordering information. GSA Advantage! will allow the user to perform various searches across all contracts including, but not limited to:

(1) Manufacturer;

(2) Manufacturer's Part Number; and

(3) Product categories.

Agencies can browse GSA Advantage! by accessing the Internet World Wide Web utilizing a browser (ex.: NetScape). The Internet address is http://www.gsaadvantage.gov

17. PURCHASE OF OPEN MARKET ITEMS

NOTE: Open Market Items are also known as incidental items, noncontract items, non-Schedule items, and items not on a Federal Supply Schedule contract. Ordering Activities procuring open market items must follow FAR 8.402(f).

For administrative convenience, an ordering activity contracting officer may add items not on the Federal Supply Multiple Award Schedule (MAS) -- referred to as open market items -- to a Federal Supply Schedule blanket purchase agreement (BPA) or an individual task or delivery order, only if-

(1) All applicable acquisition regulations pertaining to the purchase of the items not on the Federal Supply Schedule have been followed (e.g., publicizing (Part 5), competition requirements (Part 6), acquisition of commercial items (Part 12), contracting methods (Parts 13, 14, and 15), and small business programs (Part 19));

(2) The ordering activity contracting officer has determined the price for the items not on the Federal Supply Schedule is fair and reasonable;

(3) The items are clearly labeled on the order as items not on the Federal Supply Schedule; and

(4) All clauses applicable to items not on the Federal Supply Schedule are included in the order.

18. Contractor Commitments, Warranties and Representations

a. For the purpose of this contract, commitments, warranties and representations include, in addition to those agreed to for the entire schedule contract:

(1) Time of delivery/installation quotations for individual orders;

(2) Technical representations and/or warranties of products concerning performance, total system performance and/or configuration, physical, design and/or functional characteristics and capabilities of a product/equipment/ service/software package submitted in response to requirements which result in orders under this schedule contract.

(3) Any representations and/or warranties concerning the products made in any literature, description, drawings and/or specifications furnished by the Contractor.

b. The above is not intended to encompass items not currently covered by the GSA Schedule contract.

19. Overseas Activities The terms and conditions of this contract shall apply to all orders for installation, maintenance and repair of equipment in areas listed in the pricelist outside the 48 contiguous states and the District of Columbia, except as indicated below: None

Upon request of the Contractor, the ordering activity may provide the Contractor with logistics support, as available, in accordance with all applicable ordering activity regulations. Such ordering activity support will be provided on a reimbursable basis, and will only be provided to the Contractor's technical personnel whose services are exclusively required for the fulfillment of the terms and conditions of this contract.

20. Blanket Purchase Agreements (BPAs) The use of BPAs under any schedule contract to fill repetitive needs for supplies or services is allowable.

BPAs may be established with one or more schedule contractors. The number of BPAs to be established is within the discretion of the ordering activity establishing the BPA and should be based on a strategy that is expected to maximize the effectiveness of the BPA(s). Ordering activities shall follow FAR 8.405-3 when creating and implementing BPA(s).

21. Contractor Team Arrangements Contractors participating in contractor team arrangements must abide by all terms and conditions of their respective contracts. This includes compliance with Clauses 552.238-74, Industrial Funding Fee and Sales Reporting, i.e., each contractor (team member) must report sales and remit the IFF for all products and services provided under its individual contract.

22. Installation, Deinstallation, Reinstallation The Davis-Bacon Act (40 U.S.C. 276a-276a-7) provides that contracts in excess of $2,000 to which the United States or the District of Columbia is a party for construction, alteration, or repair (including painting and decorating) of public buildings or public works with the United States, shall contain a clause that no laborer or mechanic employed directly upon the site of the work shall receive less than the prevailing wage rates as determined by the Secretary of Labor. The requirements of the Davis-Bacon Act do not apply if the construction work is incidental to the furnishing of supplies, equipment, or services. For example, the requirements do not apply to simple installation or alteration of a public building or public work that is incidental to furnishing supplies or equipment under a supply contract. However, if the construction, alteration or repair is segregable and exceeds $2,000, then the requirements of the Davis- Bacon Act applies.

The ordering activity issuing the task order against this contract will be responsible for proper administration and enforcement of the Federal labor standards covered by the Davis-Bacon Act. The proper Davis-Bacon wage determination will be issued by the ordering activity at the time a request for quotations is made for applicable construction classified installation, deinstallation, and reinstallation services under SIN 132-8 or 132-9.

23. Section 508 Compliance I certify that in accordance with 508 of the Rehabilitation Act of 1973, as amended (29 U.S.C. 794d), FAR 39.2, and the Architectural and Transportation Barriers Compliance Board Electronic and Information

Technology (EIT) Accessibility Standards (36 CFR 1194) General Services Administration (GSA), that all IT hardware/software/services are 508 compliant:

Yes __X___ No _______

Section 508 compliance information on the supplies and services in this contract are available at the following website address: http://www.sra.com/contracts/gsa-schedule/docs/section508.php

The EIT standard can be found at: www.Section508.gov.

24. PRIME CONTRACTOR ORDERING FROM FEDERAL SUPPLY SCHEDULES

Prime Contractors (on cost reimbursement contracts) placing orders under Federal Supply Schedules, on behalf of an ordering activity, shall follow the terms of the applicable schedule and authorization and include with each order –

(a) A copy of the authorization from the ordering activity with whom the contractor has the prime contract (unless a copy was previously furnished to the Federal Supply Schedule contractor); and

(b) The following statement:

This order is placed under written authorization from _______ dated _______. In the event of any inconsistency between the terms and conditions of this order and those of your Federal Supply Schedule contract, the latter will govern.

25. Insurance—Work on a Government Installation (JAN 1997)(FAR 52.228-5)

(a) The Contractor shall, at its own expense, provide and maintain during the entire performance of this contract, at least the kinds and minimum amounts of insurance required in the Schedule or elsewhere in the contract.

(b) Before commencing work under this contract, the Contractor shall notify the Contracting Officer in writing that the required insurance has been obtained. The policies evidencing required insurance shall contain an endorsement to the effect that any cancellation or any material change adversely affecting the Government's interest shall not be effective—

(1) For such period as the laws of the State in which this contract is to be performed prescribe; or

(2) Until 30 days after the insurer or the Contractor gives written notice to the Contracting Officer, whichever period is longer.

(c) The Contractor shall insert the substance of this clause, including this paragraph (c), in subcontracts under this contract that require work on a Government installation and shall require subcontractors to provide and maintain the insurance required in the Schedule or elsewhere in the contract. The Contractor shall maintain a copy of all subcontractors' proofs of required insurance, and shall make copies available to the Contracting Officer upon request.

26. Software Interoperability.

Offerors are encouraged to identify within their software items any component interfaces that support open standard interoperability. An item’s interface may be identified as interoperable on the basis of participation in a Government agency-sponsored program or in an independent organization program.

Interfaces may be identified by reference to an interface registered in the component registry located at http://www.core.gov.

27. Advance Payments A payment under this contract to provide a service or deliver an article for the United States Government may not be more than the value of the service already provided or the article already delivered. Advance or pre-payment is not authorized or allowed under this contract. (31 U.S.C. 3324)

TERMS AND CONDITIONS APPLICABLE TO INFORMATION TECHNOLOGY (IT) PROFESSIONAL

SERVICES (SIN 132-51)

1. Scope

a. The prices, terms and conditions stated under Special Item Number 132-51 Information Technology Professional Services apply exclusively to IT Services within the scope of this Information Technology Schedule.

b. The Contractor shall provide services at the Contractor’s facility and/or at the Government location, as agreed to by the Contractor and the ordering office.

2. PERFORMANCE INCENTIVES I-FSS-60 Performance Incentives (April 2000)

a. Performance incentives may be agreed upon between the Contractor and the ordering activity on individual fixed price orders or Blanket Purchase Agreements under this contract.

b. The ordering activity must establish a maximum performance incentive price for these services and/or total solutions on individual orders or Blanket Purchase Agreements.

c. Incentives should be designed to relate results achieved by the contractor to specified targets. To the maximum extent practicable, ordering activities shall consider establishing incentives where performance is critical to the ordering activity’s mission and incentives are likely to motivate the contractor. Incentives shall be based on objectively measurable tasks.

3. Order

a. Agencies may use written orders, EDI orders, blanket purchase agreements, individual purchase orders, or task orders for ordering services under this contract. Blanket Purchase Agreements shall not extend beyond the end of the contract period; all services and delivery shall be made and the contract terms and conditions shall continue in effect until the completion of the order. Orders for tasks which extend beyond the fiscal year for which funds are available shall include FAR 52.232-19 Availability of Funds for the Next Fiscal Year. The purchase order shall specify the availability of funds and the period for which funds are available.

b. All task orders are subject to the terms and conditions of the contract. In the event of conflict between a task order and the contract, the contract will take precedence.

4. Performance of Services

a. SRA International, Inc. shall commence performance of services on the date agreed to by the Contractor and the ordering office.

b. SRA International, Inc. agrees to render services only during normal working hours, unless otherwise agreed to by the Contractor and the ordering office.

c. The Agency should include the criteria for satisfactory completion for each task in the Statement of Work or Delivery Order. Services shall be completed in a good and workmanlike manner.

d. Any SRA International, Inc. travel required in the performance of IT Services must comply with the Federal Travel Regulation or Joint Travel Regulations, as applicable, in effect on the date(s) the travel is performed. Established Federal Government per diem rates will apply to all Contractor travel. Contractors cannot use GSA city pair contracts.

5. Stop-Work Order (FAR 52.242-15) (AUG 1989)

(a) The Contracting Officer may, at any time, by written order to the Contractor, require the Contractor to stop all, or any part, of the work called for by this contract for a period of 90 days after the order is delivered to the Contractor, and for any further period to which the parties may agree. The order shall be specifically identified as a stop-work order issued under this clause. Upon receipt of the order, the Contractor shall immediately comply with its terms and take all reasonable steps to minimize the incurrence of costs allocable to the work covered by the order during the period of work stoppage. Within a period of 90 days after a stop-work is delivered to the Contractor, or within any extension of that period to which the parties shall have agreed, the Contracting Officer shall either-

(1) Cancel the stop-work order; or

(2) Terminate the work covered by the order as provided in the Default, or the Termination for Convenience of the Government, clause of this contract.

(b) If a stop-work order issued under this clause is canceled or the period of the order or any extension thereof expires, the Contractor shall resume work. The Contracting Officer shall make an equitable adjustment in the delivery schedule or contract price, or both, and the contract shall be modified, in writing, accordingly, if-

(1) The stop-work order results in an increase in the time required for, or in the Contractor's cost properly allocable to, the performance of any part of this contract; and

(2) The Contractor asserts its right to the adjustment within 30 days after the end of the period of work stoppage; provided, that, if the Contracting Officer decides the facts justify the action, the Contracting Officer may receive and act upon the claim submitted at any time before final payment under this contract.

(c) If a stop-work order is not canceled and the work covered by the order is terminated for the convenience of the Government, the Contracting Officer shall allow reasonable costs resulting from the stop-work order in arriving at the termination settlement.

(d) If a stop-work order is not canceled and the work covered by the order is terminated for default, the Contracting Officer shall allow, by equitable adjustment or otherwise, reasonable costs resulting from the stop-work order.

6. Inspection of Services In accordance with FAR 52.212-4 CONTRACT TERMS AND CONDITIONS--COMMERCIAL ITEMS (MAR 2009) (DEVIATION I - FEB 2007) for Firm-Fixed Price orders and FAR 52.212-4 CONTRACT

TERMS AND CONDITIONS �COMMERCIAL ITEMS (MAR 2009) (ALTERNATE I ��OCT 2008)

(DEVIATION I – FEB 2007) applies to Time-and-Materials and Labor-Hour Contracts orders placed under this contract.

7. Responsibilities of SRA International, Inc.

The Contractor shall comply with all laws, ordinances, and regulations (Federal, State, City, or otherwise) covering work of this character. If the end product of a task order is software, then FAR 52.227-14 (Deviation – May 2003) Rights in Data – General, may apply.

8. RESPONSIBILITIES OF THE ORDERING ACTIVITY

Subject to security regulations, the ordering activity shall permit Contractor access to all facilities necessary to perform the requisite IT Professional Services.

9. Independent Contractor All IT Services performed by SRA International, Inc. under the terms of this contract shall be as an independent Contractor, and not as an agent or employee of the ordering activity.

10. Organizational Conflicts Of Interest

a. Definitions.

“Contractor” means the person, firm, unincorporated association, joint venture, partnership, or corporation that is a party to this contract.

“Contractor and its affiliates” and “Contractor or its affiliates” refers to the Contractor, its chief executives, directors, officers, subsidiaries, affiliates, subcontractors at any tier, and consultants and any joint venture involving the Contractor, any entity into or with which the Contractor subsequently merges or affiliates, or any other successor or assignee of the Contractor.

An “Organizational conflict of interest” exists when the nature of the work to be performed under a proposed Government contract, without some restriction on activities by the Contractor and its affiliates, may either (i) result in an unfair competitive advantage to the Contractor or its affiliates or (ii) impair the Contractor’s or its affiliates’ objectivity in performing contract work.

b. To avoid an organizational or financial conflict of interest and to avoid prejudicing the best interests of the Government, ordering activities may place restrictions on the Contractors, its affiliates, chief executives, directors, subsidiaries and subcontractors at any tier when placing orders against schedule contracts. Such restrictions shall be consistent with FAR 9.505 and shall be designed to avoid, neutralize, or mitigate organizational conflicts of interest that might otherwise exist in situations related to individual orders placed against the schedule contract. Examples of situations, which may require restrictions, are provided at FAR 9.508.

11. Invoices SRA International, Inc., upon completion of the work ordered, shall submit invoices for IT Professional services. Progress payments may be authorized by the ordering office on individual orders if appropriate.

Progress payments shall be based upon completion of defined milestones or interim products. Invoices shall be submitted monthly for recurring services performed during the preceding month.

12. Payments

For firm-fixed price orders the ordering activity shall pay the Contractor, upon submission of proper invoices or vouchers, the prices stipulated in this contract for service rendered and accepted. Progress payments shall be made only when authorized by the order. For time-and-materials orders, the Payments under Time-and-Materials and Labor-Hour Contracts at FAR 52.212-4 (MAR 2009) (ALTERNATE I – OCT 2008) (DEVIATION I – FEB 2007) applies to time-and-materials orders placed under this contract. For labor-hour orders, the Payment under Time-and-Materials and Labor-Hour Contracts at FAR 52.212-4 (MAR 2009) (ALTERNATE I – OCT 2008) (DEVIATION I – FEB 2007) applies to labor-hour orders placed under this contract. 52.216-31(Feb 2007) Time-and-Materials/Labor-Hour Proposal Requirements—Commercial Item Acquisition. As prescribed in 16.601(e)(3), insert the following provision:

(a) The Government contemplates award of a Time-and-Materials or Labor-Hour type of contract resulting from this solicitation.

(b) The offeror must specify fixed hourly rates in its offer that include wages, overhead, general and administrative expenses, and profit. The offeror must specify whether the fixed hourly rate for each labor category applies to labor performed by—

(1) The offeror;

(2) Subcontractors; and/or

(3) Divisions, subsidiaries, or affiliates of the offeror under a common control.

13. Resumes Resumes shall be provided to the GSA Contracting Officer or the user agency upon request.

14. Incidental Support Costs Incidental support costs are available outside the scope of this contract. The costs will be negotiated separately with the ordering agency in accordance with the guidelines set forth in the FAR.

15. Approval of Subcontracts The ordering activity may require that the Contractor receive, from the ordering activity's Contracting Officer, written consent before placing any subcontract for furnishing any of the work called for in a task order.

16. Description of IT Services A. SRA International, Inc. is a Virginia-based Information Technology Services company that has grown rapidly since its incorporation in 1998. SRA International has successfully demonstrated for both commercial and government customers its ability to quickly provide practical solutions for information systems project with demanding requirements and deadlines. SRA International’ Core Competencies are: distributed web application development, information management and design, and application integration services.

The following tasks have been repeatedly accomplished for clients:

Project Management Application Design and Development Web Application Design and Development Database Design and Development Application Integration Software Testing Documentation

Our solutions are built on a foundation of open, standards-based technologies that free our clients from reliance on proprietary approaches. Our designs always favor open, well documented, and widely supported standards that promote interoperability and maintainability.

B. Professional Services Pricing The hourly rates specified below shall apply regardless of whether the services are performed by SRA International, Inc. or its subcontractors, as long as the individuals performing the services meet the education, experience and expertise requirements for the applicable category.

Labor Category Hourly Rate

Project Manager I $193.99

Principal Engineer III $182.90

Principal Engineer I $166.26

Application Engineer III $145.52

Application Engineer I $127.24

Application Developer IV $118.12

Application Developer III $115.54

Application Developer II $101.70

Analyst III $91.63

Analyst II $87.71

Administrative Assistant $42.84

C. Description of IT Services

1) Project Manager I - Minimum/General Experience: Ten (10) years of experience leading large and complex engagements, client relationships, and/or work segments. Typically has technical or functional expertise/authority on major firm methodologies. Demonstrates expertise or thought leadership in a given market area or service line, and has organizational responsibility for client service delivery and performance. Functional Responsibility: Provides executive experience and guidance to an engagement. Functional service delivery roles include Program Director, Program Manager, Department Manager, Lead Financial Analyst and Lead Technology Strategist. Education: BS/BA. Equivalent technical training and/or experience may be substituted for education using the relationship of one year of training and/or experience for each year of education.

SRA measures experience as full time employment in the specific discipline or related discipline. If the candidate has a Master’s degree in a directly related discipline, SRA counts that specific degree as equivalent to two years experience. A Master’s degree in an unrelated discipline is counted as one year experience. A Doctorate degree in a directly related discipline is counted as three years experience. A Doctorate in an unrelated discipline is counted as two years experience. These substitutions reflect the candidate’s coursework associate with the higher education.

2) Principal Engineer I - Minimum/General Experience: Eight (8) years of experience in the area of systems analysis and design services, requirements analysis, migration services, technical project management, customer business consulting, system architecture consulting, or problem analysis skills.

May possess specific experience in the type of complex solutions or licensed products to be used on a specific services order Functional Responsibility: Designs, develops documents and analyzes customer operational and application systems. Includes but is not limited to database consulting, network consulting, programming, solutions design, web-based applications, graphics, reports, documentation and client server applications. Functional service delivery roles include Software Developer, Software Engineer, Database Developer, Computer Specialist, Programmer, QA Specialist, Training Specialist, Program/Project Manager and/or Technology Specialist. Minimum Education: BA/BS. Equivalent technical training and/or experience may be substituted for education using the relationship of one year of training and/or experience for each year of education.

3) Principal Engineer III - Minimum/General Experience: Ten (10) years of experience in the area of systems analysis and design services, requirements analysis, migration services, technical project management, customer business consulting, system architecture consulting, or problem analysis skills.

May possess specific experience in the type of complex solutions or licensed products to be used on a specific services order Functional Responsibility: Designs, develops documents and analyzes customer operational and application systems. Includes but is not limited to database consulting, network consulting, programming, solutions design, web-based applications, graphics, reports, documentation and client server applications. Functional service delivery roles include Software Developer, Software Engineer, Database Developer, Program/Project Manager, Sr. Computer Specialist, Sr. Programmer and/or Sr. Technology Specialist. Minimum Education: BA/BS. Equivalent technical training and/or experience may be substituted for education using the relationship of one year of training and/or experience for each year of education

4) Application Engineer III - Minimum/General Experience: Eight (8) years of experience in the area of systems analysis and design services, requirements analysis, migration services, technical project management, customer business consulting, system architecture consulting, or problem analysis skills.

May possess specific experience in the type of complex solutions or licensed products to be used on a specific services order. Functional Responsibility: Designs, develops documents and analyzes customer operational and application systems. Includes but is not limited to database consulting, network consulting, programming, solutions design, web-based applications, graphics, reports, documentation and client server applications. Provide customers with technical support in the proper selection and application of products. Functional service delivery roles include Software Developer, Software Engineer, Database Developer, Computer Specialist, Programmer, QA Specialist, Training Specialist, Program/Project Manager and/or Technology Specialist. Minimum Education: BA/BS. Equivalent technical training and/or experience may be substituted for education using the relationship of one year of training and/or experience for each year of education.

5) Application Engineer I - Minimum/General Experience: Four (4) years of experience * in the area of systems analysis and design services, requirements analysis, migration services, technical project management, customer business consulting, system architecture consulting, or problem analysis skills.

May possess specific experience in the type of complex solutions or licensed products to be used on a specific services order. Functional Responsibility: Designs, develops documents and analyzes customer operational and application systems. Includes but is not limited to database consulting, network consulting, programming, solutions design, web-based applications, graphics, reports, documentation and client server applications. Provide customers with technical support in the proper selection and application of products. Functional service delivery roles include Software Developer, Software Engineer, Database Developer, Computer Specialist, Programmer, QA Specialist, Training Specialist, Program/Project Manager and/or Technology Specialist. Minimum Education: BA/BS. Equivalent technical training and/or experience may be substituted for education using the relationship of one year of training and/or experience for each year of education.

6) Application Developer IV - Minimum/General Experience*: Six (6) years as an Application Developer or success in a similar position inside or outside of the company; Strong knowledge of relational database concepts using stored procedures; Experience in application development using C++, C#, .NET, Java and COM; Knowledge of trading protocols such as FIX, CMS etc.; Ability to develop applications using Internet Communication Protocols (CP/IP ); Strong knowledge of MS Office suite of applications. Knowledge of such programming languages as Visual C++, C#, STL, .NET and ATL.

Functional Responsibility: Programs, tests and debugs all applications in appropriate QA environment, adhering to departmental standards, policies and procedures. Technical understanding of all hardware, server O/S, and application connectivity between servers, the Internet and CRI is required. Software knowledge base should include Windows 2000 Server, SQL 2000, HTML, JavaScript, ASP,NET, VB, Visual C++, C#, and TCP communication protocols. Work with other staff application members, as well as business and product departments to develop and write application systems and programs. Work within production control guidelines for web postings and/or production application changes. Document programs in accordance with development standards and procedures. Create and/or modify current documentation. Functional service delivery roles include Software Engineer, Database Administrator, Programmer, QA Specialist, Training Specialist, Program/Project Manager and/or Technology Specialist.

Minimum Education: BA/BS. Equivalent technical training and/or experience may be substituted for education using the relationship of one year of training and/or experience for each year of education.

7) Application Developer III - Minimum/General Experience: Four (4) years as an Application Developer or success in a similar position inside or outside of the company; Strong knowledge of relational database concepts using stored procedures; Experience in application development using C++, C#, .NET, Java and COM; Knowledge of trading protocols such as FIX, CMS etc.; Ability to develop applications using Internet Communication Protocols (CP/IP ); Strong knowledge of MS Office suite of applications. Knowledge of such programming languages as Visual C++, C#, STL, .NET and ATL.

Functional Responsibility: Programs, tests and debugs all applications in appropriate QA environment, adhering to departmental standards, policies and procedures. Technical understanding of all hardware, server O/S, and application connectivity between servers, the Internet and CRI is required. Software knowledge base should include Windows 2000 Server, SQL 2000, HTML, JavaScript, ASP,NET, VB, Visual C++, C#, and TCP communication protocols. Work with other staff application members, as well as business and product departments to develop and write application systems and programs. Work within production control guidelines for web postings and/or production application changes. Document programs in accordance with development standards and procedures. Create and/or modify current documentation. Functional service delivery roles include Software Engineer, Database Administrator, Programmer, QA Specialist, Training Specialist, Program/Project Manager and/or Technology Specialist.

Minimum Education: BA/BS. Equivalent technical training and/or experience may be substituted for education using the relationship of one year of training and/or experience for each year of education.

8) Application Developer II - Minimum/General Experience: Two (2) years as an Application Developer I or success in a similar position inside or outside of the company; Strong knowledge of relational database concepts using stored procedures; Experience in application development using C++, C#, .NET, Java and COM; Knowledge of trading protocols such as FIX, CMS etc.; Ability to develop applications using Internet Communication Protocols (CP/IP ); Strong knowledge of MS Office suite of applications. Knowledge of such programming languages as Visual C++, C#, STL, .NET and ATL.

Functional Responsibility: Programs, tests and debugs all applications in appropriate QA environment, adhering to departmental standards, policies and procedures. Technical understanding of all hardware, server O/S, and application connectivity between servers, the Internet and CRI is required. Software knowledge base should include Windows 2000 Server, SQL 2000, HTML, JavaScript, ASP,NET, VB, Visual C++, C#, and TCP communication protocols. Work with other staff application members, as well as business and product departments to develop and write application systems and programs. Work within production control guidelines for web postings and/or production application changes. Document programs in accordance with development standards and procedures. Create and/or modify current documentation. Functional service delivery roles include Software Engineer, Database Administrator, Programmer, QA Specialist, Training Specialist, Program/Project Manager and/or Technology Specialist.

Minimum Education: BA/BS. Equivalent technical training and/or experience may be substituted for education using the relationship of one year of training and/or experience for each year of education.

9) Analyst III - Minimum/General Experience: Four (4) years in project life cycle support. Functional Responsibility: Develops and supports client/server and web-based software systems, codes and maintains business applications, programs in business languages, analyzes and troubleshoots software;

participates in formal and informal reviews at pre-determined points throughout the project life cycle.

Develops and executes unit test scripts and supports other quality control activities. Supports the Project Manager in coordinating development activities.