MAS - Labvantage Solutions Inc. - GS35F0139U

MULTIPLE AWARD SCHEDULE – MAS

GENERAL PURPOSE COMMERCIAL INFORMATION

TECHNOLOGY EQUIPMENT, SOFTWARE AND SERVICES

LABVANTAGE Solutions, Inc., is an innovative provider of enterprise laboratory informatics software, headquartered in the US, with offices around the world. These solutions automate workflows, facilitate decision support, and enhance compliance within research, development, and manufacturing operations across multiple industries. We offer Software, IT Professional Services, Training plus

Maintenance and Support for our LABVANTAGE product under the following Special Item Numbers:

Special Item No. 511210 Perpetual Software Licenses

Special Item No. 54151 Maintenance of Software as a Service

Special Item No. 611420Training Courses

Special Item No. 54151S Information Technology Professional Services

LABVANTAGE Solutions Inc. does not offer any of the following under Special Item Number 33411.

- Special Physical, Visual, Speech, and Hearing Aid Equipment

- Installation (FPDS Code N070) for Equipment Offered

- Deinstallation (FPDS N070 and N058)

- Reinstallation (FPDS N070 and N058)

NOTE: Installation must be incidental to, in conjunction with and in direct support of the products sold under SIN 33411 of this contract and cannot be purchased separately. If the construction, alteration or repair is segregable and exceeds $2,000, then the requirements of the Davis-Bacon Act apply. In applying the Davis-Bacon Act, ordering activities are required to incorporate wage rate determinations into orders, as applicable.

LABVANTAGE Solutions Inc. does not offer any of the following under Special Item Number 33411REF.

- Special Physical, Visual, Speech, and Hearing Aid Equipment

- Installation (FPDS Code N070) for Equipment Offered

- Deinstallation (FPDS N070 and N058)

- Reinstallation (FPDS N070 and N058)

NOTE: Installation must be incidental to, in conjunction with and in direct support of the products sold under 33411REF of this contract and cannot be purchased separately. If the construction, alteration or repair is segregable and exceeds $2,000, then the requirements of the Davis-Bacon Act apply. In applying the Davis-Bacon Act, ordering activities are required to incorporate wage rate determinations into orders, as applicable.

LABVANTAGE Solutions Inc. offers the following:

SPECIAL ITEM NUMBER 511210 - PERPETUAL SOFTWARE LICENSES

Software maintenance as a product includes the publishing of bug/defect fixes via patches and updates/upgrades in function and technology to maintain the operability and usability of the software product. It may also include other no charge support that are included in the purchase price of the product in the commercial marketplace. No charge support includes items such as user blogs, discussion forums, on-line help libraries and FAQs (Frequently Asked Questions), hosted chat rooms, and limited telephone, email and/or web-based general technical support for user’s self diagnostics.

Software maintenance as a product does NOT include the creation, design, implementation, integration, etc. of a software package.

These examples are considered software maintenance as a service.

FSC CLASS 7030 - INFORMATION TECHNOLOGY SOFTWARE

Large Scale Computers

Application Software

Communications Software

Microcomputers

Application Software

Communications Software

NOTE: Offerors are encouraged to identify within their software items any component interfaces that support open standard interoperability. An item’s interface may be identified as interoperable on the basis of participation in a Government agency-sponsored program or in an independent organization program. Interfaces may be identified by reference to an interface registered in the component registry located at http://www.core.gov.

SPECIAL ITEM NUMBER 54151 - MAINTENANCE OF SOFTWARE AS A SERVICE

Software maintenance as a service creates, designs, implements, and/or integrates customized changes to software that solve one or more problems and is not included with the price of the software. Software maintenance as a service includes person-to-person communications regardless of the medium used to communicate: telephone support, on-line technical support, customized support, and/or technical expertise which are charged commercially.

Software maintenance as a service is billed arrears in accordance with 31 U.S.C. 3324.

SPECIAL ITEM NUMBER 611420 - TRAINING COURSES (FPDS Code U012)

SPECIAL ITEM NUMBER 54151S - INFORMATION TECHNOLOGY (IT) PROFESSIONAL SERVICES

FPDS Code D306 IT Systems Analysis Services

FPDS Code D308 Programming Services

Note 1: All non-professional labor categories must be incidental to and used solely to support hardware, software and/or professional services, and cannot be purchased separately.

Note 2: Offerors and Agencies are advised that the MAS – Information Technology Schedule is not to be used as a means to procure services which properly fall under the Brooks Act. These services include, but are not limited to, architectural, engineering, mapping, cartographic production, remote sensing, geographic information systems, and related services. FAR 36.6 distinguishes between mapping services of an A/E nature and mapping services which are not connected nor incidental to the traditionally accepted A/E

Services.

Note 3: This solicitation is not intended to solicit for the reselling of IT Professional Services, except for the provision of implementation, maintenance, integration, or training services in direct support of a product. Under such circumstances the services must be performance by the publisher or manufacturer or one of their authorized agents.

LABVANTAGE Solutions Inc.

265 Davidson Avenue, Suite 220

Somerset, NJ 08873

908-707-4100 www.LABVANTAGE.com http://www.core.gov/ http://www.labvantage.com/

Contract Number: GS-35F-0139U

Period Covered by Contract: December 12, 2017 through December 11, 2022

General Services Administration

Federal Acquisition Service

Pricelist current through Mass Mod A812, dated March 9, 2020 .

Products and ordering information in this Authorized Information Technology Schedule Pricelist are also available on the GSA

Advantage! System (http://www.gsaadvantage.gov).

INFORMATION FOR ORDERING ACTIVITIES APPLICABLE TO ALL SPECIAL ITEM NUMBERS

TERMS AND CONDITIONS APPLICABLE TO TERM SOFTWARE LICENSES (SPECIAL ITEM NUMBER 511210), PERPETUAL SOFTWARE LICENSES (SPECIAL ITEM NUMBER 511210) AND MAINTENANCE (SPECIAL ITEM NUMBER

54151) OF GENERAL PURPOSE COMMERCIAL INFORMATION TECHNOLOGY SOFTWARE

TERMS AND CONDITIONS APPLICABLE TO PURCHASE OF TRAINING COURSES FOR GENERAL PURPOSE

COMMERCIAL INFORMATION TECHNOLOGY EQUIPMENT AND SOFTWARE (SPECIAL ITEM NUMBER 611420)

TERMS AND CONDITIONS APPLICABLE TO INFORMATION TECHNOLOGY (IT) PROFESSIONAL SERVICES (SPECIAL

ITEM NUMBER 54151S)

USA COMMITMENT TO PROMOTE SMALL BUSINESS PARTICIPATION PROCUREMENT

PROGRAMS

BLANKET PURCHASE AGREEMENT (BPA)

BPA FORMAT GUIDELINES

CONTRACTOR TEAM ARRANGEMENTS

LABVANTAGE SOLUTIONS, INC.’S INFORMATION TECHNOLOGY

TRAINING COURSE DESCRIPTIONS

LABVANTAGE SOLUTIONS, INC.’S INFORMATION TECHNOLOGY

LABOR CATEGORY DESCRIPTIONS

LABVANTAGE SOLUTIONS, INC.’S AWARDED GSA PRICING

TABLE OF CONTENTS

INFORMATION FOR ORDERING ACTIVITIES

APPLICABLE TO ALL SPECIAL ITEM NUMBERS

SPECIAL NOTICE TO AGENCIES: Small Business Participation

SBA strongly supports the participation of small business concerns in the Federal Acquisition Service. To enhance Small Business

Participation SBA policy allows agencies to include in their procurement base and goals, the dollar value of orders expected to be placed against the Federal Supply Schedules, and to report accomplishments against these goals.

For orders exceeding the micropurchase threshold, FAR 8.404 requires agencies to consider the catalogs/pricelists of at least three schedule contractors or consider reasonably available information by using the GSA Advantage! on-line shopping service

(www.gsaadvantage.gov). The catalogs/pricelists, GSA Advantage! and the Federal Acquisition Service Home Page

(www.gsa.gov/fas) contain information on a broad array of products and services offered by small business concerns.

This information should be used as a tool to assist ordering activities in meeting or exceeding established small business goals. It should also be used as a tool to assist in including small, small disadvantaged, and women-owned small businesses among those considered when selecting pricelists for a best value determination.

For orders exceeding the micropurchase threshold, customers are to give preference to small business concerns when two or more items at the same delivered price will satisfy their requirement.

1. GEOGRAPHIC SCOPE OF CONTRACT:

Domestic delivery is delivery within the 48 contiguous states, Alaska, Hawaii, Puerto Rico, Washington, DC, and U.S. Territories.

Domestic delivery also includes a port or consolidation point, within the aforementioned areas, for orders received from overseas activities.

Overseas delivery is delivery to points outside of the 48 contiguous states, Washington, DC, Alaska, Hawaii, Puerto Rico, and U.S.

Territories.

Offerors are requested to check one of the following boxes:

[ ] The Geographic Scope of Contract will be domestic and overseas delivery.

[ ] The Geographic Scope of Contract will be overseas delivery only.

[X ] The Geographic Scope of Contract will be domestic delivery only.

For Special Item Number 517312 Wireless Services ONLY, if awarded, list the limited geographic coverage area:

2. CONTRACTOR’S ORDERING ADDRESS AND PAYMENT INFORMATION:

LABVANTAGE Solutions Inc.

265 Davidson Avenue, Suite 220

Somerset, NJ 08873

Phone: (888) 346-5467; Fax: (732) 560-0121 www.labvantage.com

Contractor must accept the credit card for payments equal to or less than the micro-purchase for oral or written orders under this contract. The Contractor and the ordering agency may agree to use the credit card for dollar amounts over the micro-purchase threshold (See GSAR 552.232-79 Payment by Credit Card). In addition, bank account information for wire transfer payments will be shown on the invoice.

The following telephone number(s) can be used by ordering activities to obtain technical and/or ordering assistance:

US Toll Free: (888) 346-5467 http://www.gsa.gov/fas)

3. LIABILITY FOR INJURY OR DAMAGE

The Contractor shall not be liable for any injury to ordering activity personnel or damage to ordering activity property arising from the use of equipment maintained by the Contractor, unless such injury or damage is due to the fault or negligence of the Contractor.

4. STATISTICAL DATA FOR GOVERNMENT ORDERING OFFICE COMPLETION OF STANDARD FORM 279:

Block 9: G. Order/Modification Under Federal Schedule Contract

Block 16: Data Universal Numbering System (DUNS) Number:

Block 30: Type of Contractor: _B. Other Small Business_

Block 31: Woman-Owned Small Business - No

79-327-5504

Block 37: Contractor's Taxpayer Identification Number (TIN): 13-3733484

Block 40: Veteran Owned Small Business (VOSB): No

4a. CAGE Code: 1G6S5

4b. Contractor has with the Central Contractor Registration Database.

5. FOB DESTINATION

6. DELIVERY SCHEDULE

a. TIME OF DELIVERY: The Contractor shall deliver to destination within the number of calendar days after receipt of order

(ARO), as set forth below:

SPECIAL ITEM NUMBER DELIVERY TIME (Days ARO)

511210 3 Days

54151 3 Days

611420 ** Days

54151S ** Days

** Delivery to be negotiated between Ordering Activity and Contractor

b. URGENT REQUIREMENTS: When the Federal Supply Schedule contract delivery period does not meet the bona fide urgent delivery requirements of an ordering activity, ordering activities are encouraged, if time permits, to contact the Contractor for the purpose of obtaining accelerated delivery. The Contractor shall reply to the inquiry within 3 workdays after receipt. (Telephonic replies shall be confirmed by the Contractor in writing.) If the Contractor offers an accelerated delivery time acceptable to the ordering activity, any order(s) placed pursuant to the agreed upon accelerated delivery time frame shall be delivered within this shorter delivery time and in accordance with all other terms and conditions of the contract.

** Expected Delivery to be negotiated between Ordering Activity and Contractor

7. DISCOUNTS: Prices shown are NET Prices; Basic Discounts have been deducted.

a. Prompt Payment: 0% - 30 days from receipt of invoice or date of acceptance, whichever is later.

b. Quantity: None

c. Dollar Volume: See the Volume Discounts below

d. Other Special Discounts Government Education Institutions are offered the same discounts as all other

Government customers.

8. TRADE AGREEMENTS ACT OF 1979, as amended:

All items are U.S. made end products, designated country end products, Caribbean Basin country end products, Canadian end products, or Mexican end products as defined in the Trade Agreements Act of 1979, as amended.

9. STATEMENT CONCERNING AVAILABILITY OF EXPORT PACKING:

10. Small Requirements: The minimum dollar of orders to be issued is $100.

11. MAXIMUM ORDER (All dollar amounts are exclusive of any discount for prompt payment.)

a. The Maximum Order for the following Special Item Numbers (SINs) is $500,000:

Special Item Number 511210 - Perpetual Software Licenses

Special Item Number 54151 - Maintenance of Software as a Service

Special Item Number 54151S - Information Technology Professional Services

b. The Maximum Order for the following Special Item Numbers (SINs) is $25,000:

Special Item Number 611420 - Training Courses

12. ORDERING PROCEDURES FOR FEDERAL SUPPLY SCHEDULE CONTRACTS

Ordering activities shall use the ordering procedures of Federal Acquisition Regulation (FAR) 8.405 when placing an order or establishing a BPA for supplies or services. These procedures apply to all schedules.

a. FAR 8.405-1 Ordering procedures for supplies, and services not requiring a statement of work.

b. FAR 8.405-2 Ordering procedures for services requiring a statement of work.

13. FEDERAL INFORMATION TECHNOLOGY/TELECOMMUNICATION STANDARDS REQUIREMENTS:

ordering activities acquiring products from this Schedule must comply with the provisions of the Federal Standards Program, as appropriate (reference: NIST Federal Standards Index). Inquiries to determine whether or not specific products listed herein comply with Federal Information Processing Standards (FIPS) or Federal Telecommunication Standards (FED-STDS), which are cited by ordering activities, shall be responded to promptly by the Contractor.

13.1 FEDERAL INFORMATION PROCESSING STANDARDS PUBLICATIONS (FIPS PUBS): Information Technology products under this Schedule that do not conform to Federal Information Processing Standards (FIPS) should not be acquired unless a waiver has been granted in accordance with the applicable "FIPS Publication." Federal Information Processing Standards

Publications (FIPS PUBS) are issued by the U.S. Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security Act. Information concerning their availability and applicability should be obtained from the National

Technical Information Service (NTIS), 5285 Port Royal Road, Springfield, Virginia 22161. FIPS PUBS include voluntary standards when these are adopted for Federal use. Individual orders for FIPS PUBS should be referred to the NTIS Sales Office, and orders for subscription service should be referred to the NTIS Subscription Officer, both at the above address, or telephone number (703) 487-

4650.

13.2 FEDERAL TELECOMMUNICATION STANDARDS (FED-STDS): Telecommunication products under this Schedule that do not conform to Federal Telecommunication Standards (FED-STDS) should not be acquired unless a waiver has been granted in accordance with the applicable "FED-STD." Federal Telecommunication Standards are issued by the U.S. Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security Act. Ordering information and information concerning the availability of FED-STDS should be obtained from the GSA, Federal Acquisition Service, Specification Section, 470

East L’Enfant Plaza, Suite 8100, SW, Washington, DC 20407, telephone number (202)619-8925. Please include a self-addressed mailing label when requesting information by mail. Information concerning their applicability can be obtained by writing or calling the U.S. Department of Commerce, National Institute of Standards and Technology, Gaithersburg, MD 20899, telephone number

(301)975-2833.

14. CONTRACTOR TASKS / SPECIAL REQUIREMENTS (C-FSS-370) (NOV 2003)

(a) Security Clearances: The Contractor may be required to obtain/possess varying levels of security clearances in the performance of orders issued under this contract. All costs associated with obtaining/possessing such security clearances should be factored into the price offered under the Multiple Award Schedule.

(b) Travel: The Contractor may be required to travel in performance of orders issued under this contract. Allowable travel and per diem charges are governed by Pub .L. 99-234 and FAR Part 31, and are reimbursable by the ordering agency or can be priced as a fixed price item on orders placed under the Multiple Award Schedule. Travel in performance of a task order will only be reimbursable to the extent authorized by the ordering agency. The Industrial Funding Fee does NOT apply to travel and per diem charges.

(c) Certifications, Licenses and Accreditations: As a commercial practice, the Contractor may be required to obtain/possess any variety of certifications, licenses and accreditations for specific FSC/service code classifications offered. All costs associated with obtaining/ possessing such certifications, licenses and accreditations should be factored into the price offered under the

Multiple Award Schedule program.

(d) Insurance: As a commercial practice, the Contractor may be required to obtain/possess insurance coverage for specific

FSC/service code classifications offered. All costs associated with obtaining/possessing such insurance should be factored into the price offered under the Multiple Award Schedule program.

(e) Personnel: The Contractor may be required to provide key personnel, resumes or skill category descriptions in the performance of orders issued under this contract. Ordering activities may require agency approval of additions or replacements to key personnel.

(f) Organizational Conflicts of Interest: Where there may be an organizational conflict of interest as determined by the ordering agency, the Contractor’s participation in such order may be restricted in accordance with FAR Part 9.5.

(g) Documentation/Standards: The Contractor may be requested to provide products or services in accordance with rules, regulations, OMB orders, standards and documentation as specified by the agency’s order.

(h) Data/Deliverable Requirements: Any required data/deliverables at the ordering level will be as specified or negotiated in the agency’s order.

(i) Government-Furnished Property: As specified by the agency’s order, the Government may provide property, equipment, materials or resources as necessary.

(j) Availability of Funds: Many Government agencies’ operating funds are appropriated for a specific fiscal year. Funds may not be presently available for any orders placed under the contract or any option year. The Government’s obligation on orders placed under this contract is contingent upon the availability of appropriated funds from which payment for ordering purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are available to the ordering

Contracting Officer.

(k) Overtime: For professional services, the labor rates in the Schedule should not vary by virtue of the Contractor having worked overtime. For services applicable to the Service Contract Act (as identified in the Schedule), the labor rates in the Schedule will vary as governed by labor laws (usually assessed a time and a half of the labor rate).

15. CONTRACT ADMINISTRATION FOR ORDERING ACTIVITIES: Any ordering activity, with respect to any one or more delivery orders placed by it under this contract, may exercise the same rights of termination as might the GSA Contracting

Officer under provisions of FAR 52.212-4, paragraphs (l) Termination for the ordering activity’s convenience, and (m) Termination for Cause (See 52.212-4)

16. GSA ADVANTAGE!

GSA Advantage! is an on-line, interactive electronic information and ordering system that provides on-line access to vendors' schedule prices with ordering information. GSA Advantage! will allow the user to perform various searches across all contracts including, but not limited to:

(1) Manufacturer;

(2) Manufacturer's Part Number; and

(3) Product categories.

Agencies can browse GSA Advantage! by accessing the Internet World Wide Web utilizing a browser (ex.: NetScape). The Internet address is http://www.gsaadvantage.gov

17. PURCHASE OF OPEN MARKET ITEMS

NOTE: Open Market Items are also known as incidental items, noncontract items, non-Schedule items, and items not on a Federal

Supply Schedule contract. Ordering Activities procuring open market items must follow FAR 8.402(f).

For administrative convenience, an ordering activity contracting officer may add items not on the Federal Supply Multiple Award

Schedule (MAS) -- referred to as open market items -- to a Federal Supply Schedule blanket purchase agreement (BPA) or an individual task or delivery order, only if-

(1) All applicable acquisition regulations pertaining to the purchase of the items not on the Federal Supply Schedule have been followed (e.g., publicizing (Part 5), competition requirements (Part 6), acquisition of commercial items (Part 12), contracting methods (Parts 13, 14, and 15), and small business programs (Part 19));

(2) The ordering activity contracting officer has determined the price for the items not on the Federal Supply Schedule is fair and reasonable;

(3) The items are clearly labeled on the order as items not on the Federal Supply Schedule; and

(4) All clauses applicable to items not on the Federal Supply Schedule are included in the order.

18. CONTRACTOR COMMITMENTS, WARRANTIES AND REPRESENTATIONS

a. For the purpose of this contract, commitments, warranties and representations include, in addition to those agreed to for the entire schedule contract:

(1) Time of delivery/installation quotations for individual orders;

(2) Technical representations and/or warranties of products concerning performance, total system performance and/or configuration, physical, design and/or functional characteristics and capabilities of a product/equipment/ service/software package submitted in response to requirements which result in orders under this schedule contract.

(3) Any representations and/or warranties concerning the products made in any literature, description, drawings and/or specifications furnished by the Contractor.

b. The above is not intended to encompass items not currently covered by the GSA Schedule contract.

c. The maintenance/repair service provided is the standard commercial terms and conditions for the type of products and/or services awarded.

19. OVERSEAS ACTIVITIES

The terms and conditions of this contract shall apply to all orders for installation, maintenance and repair of equipment in areas listed in the pricelist outside the 48 contiguous states and the District of Columbia, except as indicated below:

NOT APPLICABLE

Upon request of the Contractor, the ordering activity may provide the Contractor with logistics support, as available, in accordance with all applicable ordering activity regulations. Such ordering activity support will be provided on a reimbursable basis and will only be provided to the Contractor's technical personnel whose services are exclusively required for the fulfillment of the terms and conditions of this contract.

20. BLANKET PURCHASE AGREEMENTS (BPAs)

The use of BPAs under any schedule contract to fill repetitive needs for supplies or services is allowable. BPAs may be established with one or more schedule contractors. The number of BPAs to be established is within the discretion of the ordering activity establishing the BPA and should be based on a strategy that is expected to maximize the effectiveness of the BPA(s). Ordering http://www.gsaadvantage.gov/ activities shall follow FAR 8.405-3 when creating and implementing BPA(s).

21. CONTRACTOR TEAM ARRANGEMENTS

Contractors participating in contractor team arrangements must abide by all terms and conditions of their respective contracts. This includes compliance with Clauses 552.238-74, Industrial Funding Fee and Sales Reporting, i.e., each contractor (team member) must report sales and remit the IFF for all products and services provided under its individual contract.

22. INSTALLATION, DEINSTALLATION, REINSTALLATION

The Davis-Bacon Act (40 U.S.C. 276a-276a-7) provides that contracts in excess of $2,000 to which the United States or the District of

Columbia is a party for construction, alteration, or repair (including painting and decorating) of public buildings or public works with the United States, shall contain a clause that no laborer or mechanic employed directly upon the site of the work shall receive less than the prevailing wage rates as determined by the Secretary of Labor. The requirements of the Davis-Bacon Act do not apply if the construction work is incidental to the furnishing of supplies, equipment, or services. For example, the requirements do not apply to simple installation or alteration of a public building or public work that is incidental to furnishing supplies or equipment under a supply contract. However, if the construction, alteration or repair is segregable and exceeds $2,000, then the requirements of the

Davis-Bacon Act applies.

The ordering activity issuing the task order against this contract will be responsible for proper administration and enforcement of the

Federal labor standards covered by the Davis-Bacon Act. The proper Davis-Bacon wage determination will be issued by the ordering activity at the time a request for quotations is made for applicable construction classified installation, deinstallation, and reinstallation services under SIN 33411 or 33411REF.

23. SECTION 508 COMPLIANCE.

I certify that in accordance with 508 of the Rehabilitation Act of 1973, as amended (29 U.S.C. 794d), FAR 39.2, and the Architectural and Transportation Barriers Compliance Board Electronic and Information Technology (EIT) Accessibility Standards (36 CFR 1194)

General Services Administration (GSA), that all IT hardware/software/services are 508 compliant:

Yes X_

The offeror is required to submit with its offer a designated area on its website that outlines the Voluntary Product Accessibility

Template (VPAT) or equivalent qualification, which ultimately becomes the Government Product Accessibility Template (GPAT).

Section 508 compliance information on the supplies and services in this contract are available at the following website address (URL):

www.LABVANTAGE.com

The EIT standard can be found at: www.Section508.gov/.

24. PRIME CONTRACTOR ORDERING FROM FEDERAL SUPPLY SCHEDULES.

Prime Contractors (on cost reimbursement contracts) placing orders under Federal Supply Schedules, on behalf of an ordering activity, shall follow the terms of the applicable schedule and authorization and include with each order –

(a) A copy of the authorization from the ordering activity with whom the contractor has the prime contract (unless a copy was previously furnished to the Federal Supply Schedule contractor); and

(b) The following statement:

This order is placed under written authorization from dated . In the event of any inconsistency between the terms and conditions of this order and those of your Federal Supply Schedule contract, the latter will govern.

25. INSURANCE—WORK ON A GOVERNMENT INSTALLATION (JAN 1997) (FAR 52.228-5)

(a) The Contractor shall, at its own expense, provide and maintain during the entire performance of this contract, at least the kinds and minimum amounts of insurance required in the Schedule or elsewhere in the contract.

http://www.section508.gov/

(b) Before commencing work under this contract, the Contractor shall notify the Contracting Officer in writing that the required insurance has been obtained. The policies evidencing required insurance shall contain an endorsement to the effect that any cancellation or any material change adversely affecting the Government's interest shall not be effective—

(1) For such period as the laws of the State in which this contract is to be performed prescribe; or

(2) Until 30 days after the insurer or the Contractor gives written notice to the Contracting Officer, whichever period is longer.

(c) The Contractor shall insert the substance of this clause, including this paragraph (c), in subcontracts under this contract that require work on a Government installation and shall require subcontractors to provide and maintain the insurance required in the

Schedule or elsewhere in the contract. The Contractor shall maintain a copy of all subcontractors' proofs of required insurance and shall make copies available to the Contracting Officer upon request.

26. SOFTWARE INTEROPERABILITY.

Offerors are encouraged to identify within their software items any component interfaces that support open standard interoperability.

An item’s interface may be identified as interoperable on the basis of participation in a Government agency-sponsored program or in an independent organization program. Interfaces may be identified by reference to an interface registered in the component registry located at http://www.core.gov.

27. ADVANCE PAYMENTS

A payment under this contract to provide a service or deliver an article for the United States Government may not be more than the value of the service already provided or the article already delivered. Advance or pre-payment is not authorized or allowed under this contract. (31 U.S.C. 3324) http://www.core.gov/

1. INSPECTION/ACCEPTANCE

The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The ordering activity reserves the right to inspect or test any software that has been tendered for acceptance. The ordering activity may require repair or replacement of nonconforming software at no increase in contract price. The ordering activity must exercise its postacceptance rights

(1) within a reasonable time after the defect was discovered or should have been discovered; and (2) before any substantial change occurs in the condition of the software, unless the change is due to the defect in the software.

2. ENTERPRISE USER LICENSE AGREEMENTS REQUIREMENTS (EULA)

The Contractor shall provide all Enterprise User License Agreements in an editable Microsoft Office (Word) format.

3. GUARANTEE/WARRANTY

a. Unless specified otherwise in this contract, the Contractor’s standard commercial guarantee/warranty as stated in the contract’s commercial pricelist will apply to this contract.

LABVANTAGE Solutions, Inc.’s Standard Commercial Warranty: For a period of ninety (90) days following the Effective

Date, LABVANTAGE warrants that the shipped version of the Software shall substantially comply with the specifications in its documentation under normal use on the minimum configuration, provided that there are no modifications or other changes to the Software not made or authorized in writing by LABVANTAGE. Upon notice of a defect during such period, LABVANTAGE shall, at LABVANTAGE’s expense and as Customer’s sole remedy, use commercially reasonable efforts to correct or replace the defective Software.

b. The Contractor warrants and implies that the items delivered hereunder are merchantable and fit for use for the particular purpose described in this contract.

c. Limitation of Liability. Except as otherwise provided by an express or implied warranty, the Contractor will not be liable to the ordering activity for consequential damages resulting from any defect or deficiencies in accepted items.

4. TECHNICAL SERVICES

The Contractor, without additional charge to the ordering activity, shall provide a hot line technical support number 877-477-5467 and email address support@labvantage.com for the purpose of providing user assistance and guidance in the implementation of the software. The technical support number is available from 8am to 8am EST.

5. SOFTWARE MAINTENANCE

For 15% of the Software cost - Annual Maintenance & Support Services beginning after expiration of the 90 day warranty period and ending one (1) year thereafter. Software Maintenance & Support includes access to Patches, Interim Releases, Major Releases, Updates and Supporting Documentation as made available.

a. Software maintenance as it is defined: (select software maintenance type) :

X

2. Software Maintenance as a Service (SIN 54151)

Software maintenance as a service creates, designs, implements, and/or integrates customized changes to software that solve one or more problems and is not included with the price of the software. Software maintenance as a

TERMS AND CONDITIONS APPLICABLE TO TERM SOFTWARE LICENSES PERPETUAL

SOFTWARE LICENSES (SPECIAL ITEM NUMBER 511210) AND MAINTENANCE AS A

SERVICE (SPECIAL ITEM NUMBER 54151) OF GENERAL PURPOSE COMMERCIAL

INFORMATION TECHNOLOGY SOFTWARE

mailto:support@labvantage.com service includes person-to-person communications regardless of the medium used to communicate: telephone support, on-line technical support, customized support, and/or technical expertise which are charged commercially.

Software maintenance as a service is billed arrears in accordance with 31 U.S.C. 3324.

Software maintenance as a service is billed in arrears in accordance with 31 U.S.C. 3324.

b. Invoices for maintenance service shall be submitted by the Contractor on a quarterly or monthly basis, after the completion of such period. Maintenance charges must be paid in arrears (31 U.S.C. 3324). PROMPT PAYMENT DISCOUNT, IF APPLICABLE, SHALL BE SHOWN ON THE INVOICE.

6. PERIODS OF TERM LICENSES (SIN 511210) AND MAINTENANCE (SIN 54151)

a. The Contractor shall honor orders for periods for the duration of the contract period or a lessor period of time.

b. Maintenance may be discontinued by the ordering activity on thirty (30) calendar days written notice to the Contractor.

c. Annual Funding. When annually appropriated funds are cited on an order for maintenance, the period of the maintenance shall automatically expire on September 30 of the contract period, or at the end of the contract period, whichever occurs first.

Renewal of the maintenance orders citing the new appropriation shall be required, if the term maintenance is to be continued during any remainder of the contract period.

d. Cross-Year Funding Within Contract Period. Where an ordering activity’s specific appropriation authority provides for funds in excess of a 12 month (fiscal year) period, the ordering activity may place an order under this schedule contract for a period up to the expiration of the contract period, notwithstanding the intervening fiscal years.

e. Ordering activities should notify the Contractor in writing thirty (30) calendar days prior to the expiration of an order, if the maintenance is to be terminated at that time. Orders for the continuation of term licenses and/or maintenance will be required if the maintenance is to be continued during the subsequent period.

7. CONVERSION FROM TERM LICENSE TO PERPETUAL LICENSE

a. The ordering activity may convert term licenses to perpetual licenses for any or all software at any time following acceptance of software. At the request of the ordering activity the Contractor shall furnish, within ten (l0) calendar days, for each software product that is contemplated for conversion, the total amount of conversion credits which have accrued while the software was on a term license and the date of the last update or enhancement.

b. Conversion credits which are provided shall, within the limits specified, continue to accrue from one contract period to the next, provided the software remains on a term license within the ordering activity.

c. The term license for each software product shall be discontinued on the day immediately preceding the effective date of conversion from a term license to a perpetual license.

d. The price the ordering activity shall pay will be the perpetual license price that prevailed at the time such software was initially ordered under a term license, or the perpetual license price prevailing at the time of conversion from a term license to a perpetual license, whichever is the less, minus an amount equal to NOT APPLICABLE % of all term license payments during the period that the software was under a term license within the ordering activity.

8. TERM LICENSE CESSATION

a. After a software product has been on a continuous term license for a period of NOT APPLICABLE months, a fully paid-up, non-exclusive, perpetual license for the software product shall automatically accrue to the ordering activity. The period of continuous term license for automatic accrual of a fully paid-up perpetual license does not have to be achieved during a particular fiscal year; it is a written Contractor commitment which continues to be available for software that is initially ordered under this contract, until a fully paid-up perpetual license accrues to the ordering activity. However, should the term license of the software be discontinued before the specified period of the continuous term license has been satisfied, the perpetual license accrual shall be forfeited.

b. The Contractor agrees to provide updates and maintenance service for the software after a perpetual license has accrued, at the prices and terms of Special Item Number 54151, if the licensee elects to order such services. Title to the software shall remain with the Contractor.

9. UTILIZATION LIMITATIONS - (SIN 511210, SIN 511210, AND SIN 54151)

a. Software acquisition is limited to commercial computer software defined in FAR Part 2.101.

b. When acquired by the ordering activity, commercial computer software and related documentation so legend shall be subject to the following:

(1) Title to and ownership of the software and documentation shall remain with the Contractor, unless otherwise specified.

(2) Software licenses are by site and by ordering activity. An ordering activity is defined as a cabinet level or independent ordering activity. The software may be used by any subdivision of the ordering activity (service, bureau, division, command, etc.) that has access to the site the software is placed at, even if the subdivision did not participate in the acquisition of the software. Further, the software may be used on a sharing basis where multiple agencies have joint projects that can be satisfied by the use of the software placed at one ordering activity's site. This would allow other agencies access to one ordering activity's database. For ordering activity public domain databases, user agencies and third parties may use the computer program to enter, retrieve, analyze and present data. The user ordering activity will take appropriate action by instruction, agreement, or otherwise, to protect the Contractor's proprietary property with any third parties that are permitted access to the computer programs and documentation in connection with the user ordering activity's permitted use of the computer programs and documentation. For purposes of this section, all such permitted third parties shall be deemed agents of the user ordering activity.

(3) Except as is provided in paragraph 8.b(2) above, the ordering activity shall not provide or otherwise make available the software or documentation, or any portion thereof, in any form, to any third party without the prior written approval of the

Contractor. Third parties do not include prime Contractors, subcontractors and agents of the ordering activity who have the ordering activity's permission to use the licensed software and documentation at the facility, and who have agreed to use the licensed software and documentation only in accordance with these restrictions. This provision does not limit the right of the ordering activity to use software, documentation, or information therein, which the ordering activity may already have or obtains without restrictions.

(4) The ordering activity shall have the right to use the computer software and documentation with the computer for which it is acquired at any other facility to which that computer may be transferred, or in cases of Disaster Recovery, the ordering activity has the right to transfer the software to another site if the ordering activity site for which it is acquired is deemed to be unsafe for ordering activity personnel; to use the computer software and documentation with a backup computer when the primary computer is inoperative; to copy computer programs for safekeeping (archives) or backup purposes; to transfer a copy of the software to another site for purposes of benchmarking new hardware and/or software; and to modify the software and documentation or combine it with other software, provided that the unmodified portions shall remain subject to these restrictions.

(5) "Commercial Computer Software" may be marked with the Contractor's standard commercial restricted rights legend, but the schedule contract and schedule pricelist, including this clause, "Utilization Limitations" are the only governing terms and conditions, and shall take precedence and supersede any different or additional terms and conditions included in the standard commercial legend.

10. SOFTWARE CONVERSIONS - (SIN 511210 AND SIN 511210)

Full monetary credit will be allowed to the ordering activity when conversion from one version of the software to another is made as the result of a change in operating system , or from one computer system to another. Under a perpetual license (511210), the purchase price of the new software shall be reduced by the amount that was paid to purchase the earlier version. Under a term license

(511210), conversion credits which accrued while the earlier version was under a term license shall carry forward and remain available as conversion credits which may be applied towards the perpetual license price of the new version.

11. DESCRIPTIONS AND EQUIPMENT COMPATIBILITY

The Contractor shall include, in the schedule pricelist, a complete description of each software product and a list of equipment on which the software can be used. Also, included shall be a brief, introductory explanation of the modules and documentation which are offered.

12. RIGHT-TO-COPY PRICING

The Contractor shall insert the discounted pricing for right-to-copy licenses.

1. SCOPE

a. The Contractor shall provide training courses normally available to commercial customers, which will permit ordering activity users to make full, efficient use of general purpose commercial IT products. Training is restricted to training courses for those products within the scope of this solicitation.

b. The Contractor shall provide training at the Contractor's facility and/or at the ordering activity's location, as agreed to by the

Contractor and the ordering activity.

2. ORDER

Written orders, EDI orders (GSA Advantage! and FACNET), credit card orders, and orders placed under blanket purchase agreements

(BPAs) shall be the basis for the purchase of training courses in accordance with the terms of this contract. Orders shall include the student's name, course title, course date and time, and contracted dollar amount of the course.

3. TIME OF DELIVERY

The Contractor shall conduct training on the date (time, day, month, and year) agreed to by the Contractor and the ordering activity.

4. CANCELLATION AND RESCHEDULING

a. The ordering activity will notify the Contractor at least seventy-two (72) hours before the scheduled training date, if a student will be unable to attend. The Contractor will then permit the ordering activity to either cancel the order or reschedule the training at no additional charge. In the event the training class is rescheduled, the ordering activity will modify its original training order to specify the time and date of the rescheduled training class.

b. In the event the ordering activity fails to cancel or reschedule a training course within the time frame specified in paragraph a, above, the ordering activity will be liable for the contracted dollar amount of the training course. The Contractor agrees to permit the ordering activity to reschedule a student who fails to attend a training class within ninety (90) days from the original course date, at no additional charge.

c. The ordering activity reserves the right to substitute one student for another up to the first day of class.

d. In the event the Contractor is unable to conduct training on the date agreed to by the Contractor and the ordering activity, the

Contractor must notify the ordering activity at least seventy-two (72) hours before the scheduled training date.

5. FOLLOW-UP SUPPORT

The Contractor agrees to provide each student with unlimited telephone support or online support for a period of one (1) year from the completion of the training course. During this period, the student may contact the Contractor's instructors for refresher assistance and answers to related course curriculum questions.

6. PRICE FOR TRAINING

The price that the ordering activity will be charged will be the ordering activity training price in effect at the time of order placement, or the ordering activity price in effect at the time the training course is conducted, whichever is less.

TERMS AND CONDITIONS APPLICABLE TO PURCHASE OF

TRAINING COURSES FOR GENERAL PURPOSE COMMERCIAL

INFORMATION TECHNOLOGY EQUIPMENT AND SOFTWARE

(SPECIAL ITEM NUMBER 611420)

7. INVOICES AND PAYMENT

Invoices for training shall be submitted by the Contractor after ordering activity completion of the training course. Charges for training must be paid in arrears (31 U.S.C. 3324). PROMPT PAYMENT DISCOUNT, IF APPLICABLE, SHALL BE SHOWN ON

THE INVOICE.

8. FORMAT AND CONTENT OF TRAINING

a. The Contractor shall provide written materials (i.e., manuals, handbooks, texts, etc.) normally provided with course offerings.

Such documentation will become the property of the student upon completion of the training class.

b. **If applicable** For hands-on training courses, there must be a one-to-one assignment of IT equipment to students.

c. The Contractor shall provide each student with a Certificate of Training at the completion of each training course.

d. The Contractor shall provide the following information for each training course offered:

(1) The course title and a brief description of the course content, to include the course format (e.g., lecture, discussion, hands-on training);

(2) The length of the course;

(3) Mandatory and desirable prerequisites for student enrollment;

(4) The minimum and maximum number of students per class;

(5) The locations where the course is offered;

(6) Class schedules; and

(7) Price (per student, per class (if applicable)).

e. For those courses conducted at the ordering activity’s location, instructor travel charges (if applicable), including mileage and daily living expenses (e.g., per diem charges) are governed by Pub. L. 99-234 and FAR Part 31.205-46, and are reimbursable by the ordering activity on orders placed under the Multiple Award Schedule, as applicable, in effect on the date(s) the travel is performed.

Contractors cannot use GSA city pair contracts. The Industrial Funding Fee does NOT apply to travel and per diem charges.

f. For Online Training Courses, a copy of all training material must be available for electronic download by the students.

9. “NO CHARGE” TRAINING

The Contractor shall describe any training provided with equipment and/or software provided under this contract, free of charge, in the space provided below.

NONE

1. SCOPE

a. The prices, terms and conditions stated under Special Item Number 54151S Information Technology Professional Services apply exclusively to IT/IAM Professional Services within the scope of this Information Technology Schedule.

b. The Contractor shall provide services at the Contractor’s facility and/or at the ordering activity location, as agreed to by the

Contractor and the ordering activity.

2. PERFORMANCE INCENTIVES I-FSS-60 Performance Incentives (April 2000)

a. Performance incentives may be agreed upon between the Contractor and the ordering activity on individual fixed price orders or Blanket Purchase Agreements under this contract.

b. The ordering activity must establish a maximum performance incentive price for these services and/or total solutions on individual orders or Blanket Purchase Agreements.

c. Incentives should be designed to relate results achieved by the contractor to specified targets. To the maximum extent practicable, ordering activities shall consider establishing incentives where performance is critical to the ordering activity’s mission and incentives are likely to motivate the contractor. Incentives shall be based on objectively measurable tasks.

3. ORDER

a. Agencies may use written orders, EDI orders, blanket purchase agreements, individual purchase orders, or task orders for ordering services under this contract. Blanket Purchase Agreements shall not extend beyond the end of the contract period; all services and delivery shall be made and the contract terms and conditions shall continue in effect until the completion of the order.

Orders for tasks which extend beyond the fiscal year for which funds are available shall include FAR 52.232-19 (Deviation – May

2003) Availability of Funds for the Next Fiscal Year. The purchase order shall specify the availability of funds and the period for which funds are available.

b. All task orders are subject to the terms and conditions of the contract. In the event of conflict between a task order and the contract, the contract will take precedence.

4. PERFORMANCE OF SERVICES

a. The Contractor shall commence performance of services on the date agreed to by the Contractor and the ordering activity.

b. The Contractor agrees to render services only during normal working hours, unless otherwise agreed to by the…