Federal Supply Schedule GS35F0099W

AUTHORIZED

INFORMATION TECHNOLOGY SCHEDULE PRICELIST

GENERAL PURPOSE COMMERCIAL INFORMATION TECHNOLOGY

EQUIPMENT, SOFTWARE AND SERVICES

SPECIAL ITEM NUMBER 132-8 PURCHASE OF EQUIPMENT

FSC CLASS 7010 - SYSTEM CONFIGURATION

End User Computers/Desktop Computers Professional Workstations Servers Laptop/Portable/Notebook Computers Large Scale Computers Optical and Imaging Systems Other Systems Configuration Equipment, Not Elsewhere Classified

FSC CLASS 7025 - INPUT/OUTPUT AND STORAGE DEVICES

Printers Display Graphics, including Video Graphics, Light Pens, Digitizers, Scanners, and Touch Screens Network Equipment Other Communications Equipment Optical Recognition Input/Output Devices Storage Devices including Magnetic Storage, Magnetic Tape Storage and Optical Disk Storage Other Input/Output and Storage Devices, Not Elsewhere Classified

FSC Class 7042 - MINI AND MICRO COMPUTER CONTROL DEVICES

Microcomputer Control Devices Telephone Answering and Voice Messaging Systems

FSC Class 5805 - TELEPHONE AND TELEGRAPH EQUIPMENT

Telephone Equipment Audio and Video Teleconferencing Equipment

FSC CLASS 5810 - COMMUNICATIONS SECURITY EQUIPMENT AND COMPONENTS

Communications Security Equipment

FSC CLASS 5815 - TELETYPE AND FACSIMILE EQUIPMENT

Facsimile Equipment (FAX)

FSC CLASS 5895 - MISCELLANEOUS COMMUNICATION EQUIPMENT

Miscellaneous Communications Equipment

- Special Physical, Visual, Speech, and Hearing Aid Equipment– Not Offered

- Installation (FPDS Code N070) for Equipment Offered– Not Offered

- Deinstallation (FPDS N070) – Not Offered

- Reinstallation (FPDS N070) – Not Offered

NOTE: Installation must be incidental to, in conjunction with and in direct support of the products sold under SIN 132-8 of this contract and cannot be purchased separately. If the construction, alteration or repair is segregable and exceeds $2,000, then the requirements of the Davis-Bacon Act apply. In applying the Davis-Bacon Act, ordering activities are required to incorporate wage rate determinations into orders, as applicable.

Atman Inc.

1325 E. El Segundo Blvd. El Segundo, CA 90245

(888)205-777 x5144 pcRUSH.com

Contract Number: ___GS-35F-0099W________________________

Period Covered by Contract: ___Nov. 16, 2009 – Nov. 16, 2014______

General Services Administration Federal Acquisition Service

Pricelist current through Modification #__2_____, dated __June 29, 2010___.

Products and ordering information in this Authorized FSS Information Technology Schedule Pricelist are also available on the GSA Advantage! System (http://www.gsaadvantage.gov).

Table of Contents:

Introduction of Special Item Number 132-8 ……………………………..1.

Introduction of Atman, Inc dba pcRush.com …………………………….3.

Geographic Scope of Contract……………………………………………3.

Contractor’s Ordering Address and Payment Information……………….4.

Liability for Injury or Damage……………………………………………4.

Statistical Data for Government Ordering Office Completion of Standard Form 279……………………………………….4.

FOB Destination………………………………………………………….5.

Delivery Schedule………………………………………………………...5.

Discounts……………………………………………………………….....5.

Trade Agreements Act of 1979…………………………………………...5.

Statement Concerning Availability of Export Packing…………………...5.

Ordering Procedures for Federal Supply Schedule Contracts……………6.

Federal Information Technology/Telecommunication Standards Requirements………………………………………………..…6

Federal Information Processing Standard Publications…………………..6.

Federal Telecommunication Standards…………………………………...6.

Contractor Tasks / Special Requirements (C-FSS-370)……………….…6.

Contract Administration for Ordering Activities…………………………7.

GSA Advantage…………………………………………………………..8.

Purchase of Open Market Items…………………………………………..8.

Contractor Commitments, Warranties and Representations……………...8.

Overseas Activities……………………………………………………….8.

Blank Purchase Agreement (BPAs)………………………………………8.

Contractor Team Arrangements…………………………………………..9.

Installation, Deinstallation, Reinstallation………………………………..9.

Section 508 Compliance……………………………………………….....9.

Prime Contractor Ordering from Federal Supply Schedules……………..9.

Insurance – Work on a Government Installation (FAR 52.228-5)…….....9.

Software Interoperability………………………………………………..10

Advance Payments………………………………………………………10.

Terms and Conditions………………………………………………..11-13.

GSA Pricing………………………………………………………….14-17.

Small Business Participation……………………………………………18.

Blanket Purchase Agreement……………………………………………19.

INFORMATION FOR ORDERING ACTIVITIES

APPLICABLE TO ALL SPECIAL ITEM NUMBERS

SPECIAL NOTICE TO AGENCIES: Small Business Participation

SBA strongly supports the participation of small business concerns in the Federal Acquisition Service. To enhance Small Business Participation SBA policy allows agencies to include in their procurement base and goals, the dollar value of orders expected to be placed against the Federal Supply Schedules, and to report accomplishments against these goals.

For orders exceeding the micropurchase threshold, FAR 8.404 requires agencies to consider the catalogs/pricelists of at least three schedule contractors or consider reasonably available information by using the GSA Advantage! on-line shopping service (www.gsaadvantage.gov). The catalogs/pricelists, GSA Advantage! and the Federal Acquisition Service Home Page (www.fss.gsa.gov) contain information on a broad array of products and services offered by small business concerns.

This information should be used as a tool to assist ordering activities in meeting or exceeding established small business goals. It should also be used as a tool to assist in including small, small disadvantaged, and women-owned small businesses among those considered when selecting pricelists for a best value determination.

For orders exceeding the micropurchase threshold, customers are to give preference to small business concerns when two or more items at the same delivered price will satisfy their requirement.

1. GEOGRAPHIC SCOPE OF CONTRACT:

Domestic delivery is delivery within the 48 contiguous states, Alaska, Hawaii, Puerto Rico, Washington, DC, and U.S. Territories. Domestic delivery also includes a port or consolidation point, within the aforementioned areas, for orders received from overseas activities.

Overseas delivery is delivery to points outside of the 48 contiguous states, Washington, DC, Alaska, Hawaii, Puerto Rico, and U.S. Territories.

Offerors are requested to check one of the following boxes:

[ ] The Geographic Scope of Contract will be domestic and overseas delivery.

[ ] The Geographic Scope of Contract will be overseas delivery only.

[x] The Geographic Scope of Contract will be domestic delivery only.

2. CONTRACTOR’S ORDERING ADDRESS AND PAYMENT INFORMATION:

Frank Khalili

Government Division

Atman, Inc. dba/pcRUSH.com

1325 E. El Segundo Blvd.

El Segundo, CA 90245 Contractor must accept the credit card for payments equal to or less than the micro-purchase for oral or written orders under this contract. Credit cards will be acceptable for payments above micro purchase threshold (See GSAR

552.232-79 Payment by Credit Card). In addition, bank account information for wire transfer payments will be shown on the invoice.

The following telephone number(s) can be used by ordering activities to obtain technical and/or ordering assistance:

Direct: (310) 356-5144

Toll Free: (888) 205-7777

Fax: (310) 356-5160

Email: gsa@pcrush.com

When Authorized Dealers are allowed by the Contractor to bill ordering activities and accept payment, the order and/or payment must be in the name of the Contractor, in care of the Authorized Dealer.

3. LIABILITY FOR INJURY OR DAMAGE

The Contractor shall not be liable for any injury to ordering activity personnel or damage to ordering activity property arising from the use of equipment maintained by the Contractor, unless such injury or damage is due to the fault or negligence of the Contractor.

4. STATISTICAL DATA FOR GOVERNMENT ORDERING OFFICE COMPLETION OF

STANDARD FORM 279:

Block 9: G. Order/Modification Under Federal Schedule Block 16: Data Universal Numbering System (DUNS) Number: 016830429 Block 30: Type of Contractor - Other Small Business Block 31: Woman-Owned Small Business - No Block 36: Contractor's Taxpayer Identification Number (TIN): 95-4660646

4a. CAGE Code: 1QAC3 4b. Contractor has registered with the Central Contractor Registration Database.

5. FOB: DESTINATION

6. DELIVERY SCHEDULE

a. TIME OF DELIVERY: The Contractor shall deliver to destination within the number of calendar days after receipt of order (ARO), as set forth below:

SPECIAL ITEM NUMBER DELIVERY TIME (Days ARO)

132.8 20 9__ Days

Next day, two day, and three day shipping are also available at an additional cost. Expedited shipping costs will be based off rates charged by shipping company.

b. URGENT REQUIREMENTS: When the Federal Supply Schedule contract delivery period does not meet the bona fide urgent delivery requirements of an ordering activity, ordering activities are encouraged, if time permits, to contact the Contractor for the purpose of obtaining accelerated delivery. The Contractor shall reply to the inquiry within 3 workdays after receipt. (Telephonic replies shall be confirmed by the Contractor in writing.) If the Contractor offers an accelerated delivery time acceptable to the ordering activity, any order(s) placed pursuant to the agreed upon accelerated delivery time frame shall be delivered within this shorter delivery time and in accordance with all other terms and conditions of the contract.

7. DISCOUNTS: Prices shown are NET Prices; Basic Discounts have been deducted.

a. Prompt Payment: 0% - 30 days from receipt of invoice or date of acceptance, whichever is later.

b. Quantity - None

c. Dollar Volume - None

d. Government Educational Institutions – Government Educational Institutions are offered the same discounts as all other Government customers.

e. Ot her: None

8. TRADE AGREEMENTS ACT OF 1979, as amended:

All items are U.S. made end products, designated country end products, Caribbean Basin country end products, Canadian end products, or Mexican end products as defined in the Trade Agreements Act of 1979, as amended.

9. STATEMENT CONCERNING AVAILABILITY OF EXPORT PACKING:

10. Small Requirements: The minimum dollar value of orders to be issued is $ 100.

11. MAXIMUM ORDER (All dollar amounts are exclusive of any discount for prompt payment.)

a. The Maximum Order value for the following Special Item Numbers (SINs) is $500,000:

Special Item Number 132-8 - Purchase of Equipment

12. ORDERING PROCEDURES FOR FEDERAL SUPPLY SCHEDULE CONTRACTS

Ordering activities shall use the ordering procedures of Federal Acquisition Regulation (FAR) 8.405 when placing an order or establishing a BPA for supplies or services. These procedures apply to all schedules.

a. FAR 8.405-1 Ordering procedures for supplies, and services not requiring a statement of work.

b. FAR 8.405-2 Ordering procedures for services requiring a statement of work.

13. FEDERAL INFORMATION TECHNOLOGY/TELECOMMUNICATION STANDARDS

REQUIREMENTS: ordering activities acquiring products from this Schedule must comply with the provisions of the Federal Standards Program, as appropriate (reference: NIST Federal Standards Index). Inquiries to determine whether or not specific products listed herein comply with Federal Information Processing Standards (FIPS) or Federal Telecommunication Standards (FED-STDS), which are cited by ordering activities, shall be responded to promptly by the Contractor.

13.1 FEDERAL INFORMATION PROCESSING STANDARDS PUBLICATIONS (FIPS PUBS):

Information Technology products under this Schedule that do not conform to Federal Information Processing Standards (FIPS) should not be acquired unless a waiver has been granted in accordance with the applicable "FIPS Publication." Federal Information Processing Standards Publications (FIPS PUBS) are issued by the U.S.

Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security Act. Information concerning their availability and applicability should be obtained from the National Technical Information Service (NTIS), 5285 Port Royal Road, Springfield, Virginia 22161. FIPS PUBS include voluntary standards when these are adopted for Federal use. Individual orders for FIPS PUBS should be referred to the NTIS Sales Office, and orders for subscription service should be referred to the NTIS Subscription Officer, both at the above address, or telephone number (703) 487-4650.

13.2 FEDERAL TELECOMMUNICATION STANDARDS (FED-STDS): Telecommunication products under this Schedule that do not conform to Federal Telecommunication Standards (FED-STDS) should not be acquired unless a waiver has been granted in accordance with the applicable "FED-STD." Federal Telecommunication Standards are issued by the U.S. Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security Act. Ordering information and information concerning the availability of FED-STDS should be obtained from the GSA, Federal Acquisition Service, Specification Section, 470 East L’Enfant Plaza, Suite 8100, SW, Washington, DC 20407, telephone number (202)619-8925. Please include a self-addressed mailing label when requesting information by mail. Information concerning their applicability can be obtained by writing or calling the U.S. Department of Commerce, National Institute of Standards and Technology, Gaithersburg, MD 20899, telephone number (301)975-2833.

14. CONTRACTOR TASKS / SPECIAL REQUIREMENTS (C-FSS-370) (NOV 2003)

(a) Security Clearances: The Contractor may be required to obtain/possess varying levels of security clearances in the performance of orders issued under this contract. All costs associated with obtaining/possessing such security clearances should be factored into the price offered under the Multiple Award Schedule.

(b) Travel: The Contractor may be required to travel in performance of orders issued under this contract.

Allowable travel and per diem charges are governed by Pub .L. 99-234 and FAR Part 31, and are reimbursable by the ordering agency or can be priced as a fixed price item on orders placed under the Multiple Award Schedule. Travel in performance of a task order will only be reimbursable to the extent authorized by the ordering agency. The Industrial Funding Fee does NOT apply to travel and per diem charges.

(c) Certifications, Licenses and Accreditations: As a commercial practice, the Contractor may be required to obtain/possess any variety of certifications, licenses and accreditations for specific FSC/service code classifications offered. All costs associated with obtaining/ possessing such certifications, licenses and accreditations should be factored into the price offered under the Multiple Award Schedule program.

(d) Insurance: As a commercial practice, the Contractor may be required to obtain/possess insurance coverage for specific FSC/service code classifications offered. All costs associated with obtaining/possessing such insurance should be factored into the price offered under the Multiple Award Schedule program.

(e) Personnel: The Contractor may be required to provide key personnel, resumes or skill category descriptions in the performance of orders issued under this contract. Ordering activities may require agency approval of additions or replacements to key personnel.

(f) Organizational Conflicts of Interest: Where there may be an organizational conflict of interest as determined by the ordering agency, the Contractor’s participation in such order may be restricted in accordance with FAR Part 9.5.

(g) Docum entation/Standards: The Contractor may be requested to provide products or services in accordance with rules, regulations, OMB orders, standards and documentation as specified by the agency’s order.

(h) Data/Deliverable Requirements: Any required data/deliverables at the ordering level will be as specified or negotiated in the agency’s order.

(i) Government-Furnished Property: As specified by the agency’s order, the Government may provide property, equipment, materials or resources as necessary.

(j) Availability of Funds: Many Government agencies’ operating funds are appropriated for a specific fiscal year.

Funds may not be presently available for any orders placed under the contract or any option year. The Government’s obligation on orders placed under this contract is contingent upon the availability of appropriated funds from which payment for ordering purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are available to the ordering Contracting Officer.

(k) Overtime: For professional services, the labor rates in the Schedule should not vary by virtue of the Contractor having worked overtime. For services applicable to the Service Contract Act (as identified in the Schedule), the labor rates in the Schedule will vary as governed by labor laws (usually assessed a time and a half of the labor rate).

15. CONTRACT ADMINISTRATION FOR ORDERING ACTIVITIES: Any ordering activity, with respect to any one or more delivery orders placed by it under this contract, may exercise the same rights of termination as might the GSA Contracting Officer under provisions of FAR 52.212-4, paragraphs (l) Termination for the ordering activity’s convenience, and (m) Termination for Cause (See 52.212-4)

16. GSA ADVANTAGE!

GSA Advantage! is an on-line, interactive electronic information and ordering system that provides on-line access to vendors' schedule prices with ordering information. GSA Advantage! will allow the user to perform various searches across all contracts including, but not limited to:

(1) M anufacturer;

(2) Manufacturer's Part Number; and

(3) Product categories.

Agencies can browse GSA Advantage! by accessing the Internet World Wide Web utilizing a browser (ex.:

NetScape). The Internet address is http://www.gsaadvantage.gov

17. PURCHASE OF OPEN MARKET ITEMS

NOTE: Open Market Items are also known as incidental items, noncontract items, non-Schedule items, and items not on a Federal Supply Schedule contract. ODCs (Other Direct Costs) are not part of this contract and should be treated as open market purchases. Ordering Activities procuring open market items must follow FAR 8.402(f).

For administrative convenience, an ordering activity contracting officer may add items not on the Federal Supply Multiple Award Schedule (MAS) -- referred to as open market items -- to a Federal Supply Schedule blanket purchase agreement (BPA) or an individual task or delivery order, only if-

(1) All applicable acquisition regulations pertaining to the purchase of the items not on the Federal Supply Schedule have been followed (e.g., publicizing (Part 5), competition requirements (Part 6), acquisition of commercial items (Part 12), contracting methods (Parts 13, 14, and 15), and small business programs (Part 19));

(2) The ordering activity contracting officer has determined the price for the items not on the Federal Supply Schedule is fair and reasonable;

(3) The items are clearly labeled on the order as items not on the Federal Supply Schedule; and

(4) All clauses applicable to items not on the Federal Supply Schedule are included in the order.

18. CONTRACTOR COMMITMENTS, WARRANTIES AND REPRESENTATIONS

a. For the purpose of this contract, commitments, warranties and representations include, in addition to those agreed to for the entire schedule contract:

(1) Time of delivery/installation quotations for individual orders;

(2) Technical representations and/or warranties of products concerning performance, total system performance and/or configuration, physical, design and/or functional characteristics and capabilities of a product/equipment/ service/software package submitted in response to requirements which result in orders under this schedule contract.

(3) Any representations and/or warranties concerning the products made in any literature, description, drawings and/or specifications furnished by the Contractor.

b. The above is not intended to encompass items not currently covered by the GSA Schedule contract.

19. OVERSEAS ACTIVITIES

The terms and conditions of this contract shall apply to all orders for installation, maintenance and repair of equipment in areas listed in the pricelist outside the 48 contiguous states and the District of Columbia, except as indicated below:

Domestic only

Upon request of the Contractor, the ordering activity may provide the Contractor with logistics support, as available, in accordance with all applicable ordering activity regulations. Such ordering activity support will be provided on a reimbursable basis, and will only be provided to the Contractor's technical personnel whose services are exclusively required for the fulfillment of the terms and conditions of this contract.

20. BLANKET PURCHASE AGREEMENTS (BPAs)

The use of BPAs under any schedule contract to fill repetitive needs for supplies or services is allowable. BPAs may be established with one or more schedule contractors. The number of BPAs to be established is within the discretion of the ordering activity establishing the BPA and should be based on a strategy that is expected to maximize the effectiveness of the BPA(s). Ordering activities shall follow FAR 8.405-3 when creating and implementing BPA(s).

21. CONTRACTOR TEAM ARRANGEMENTS

Contractors participating in contractor team arrangements must abide by all terms and conditions of their respective contracts. This includes compliance with Clauses 552.238-74, Industrial Funding Fee and Sales Reporting, i.e., each contractor (team member) must report sales and remit the IFF for all products and services provided under its individual contract.

22. INSTALLATION, DEINSTALLATION, REINSTALLATION

The Davis-Bacon Act (40 U.S.C. 276a-276a-7) provides that contracts in excess of $2,000 to which the United States or the District of Columbia is a party for construction, alteration, or repair (including painting and decorating) of public buildings or public works with the United States, shall contain a clause that no laborer or mechanic employed directly upon the site of the work shall received less than the prevailing wage rates as determined by the Secretary of Labor. The requirements of the Davis-Bacon Act do not apply if the construction work is incidental to the furnishing of supplies, equipment, or services. For example, the requirements do not apply to simple installation or alteration of a public building or public work that is incidental to furnishing supplies or equipment under a supply contract.

However, if the construction, alteration or repair is segregable and exceeds $2,000, then the requirements of the Davis-Bacon Act applies.

The ordering activity issuing the task order against this contract will be responsible for proper administration and enforcement of the Federal labor standards covered by the Davis-Bacon Act. The proper Davis-Bacon wage determination will be issued by the ordering activity at the time a request for quotations is made for applicable construction classified installation, deinstallation, and reinstallation services under SIN 132-8

23. SECTION 508 COMPLIANCE.

If applicable, Section 508 compliance information on the supplies and services in this contract are available in Electronic and Information Technology (EIT) at the following:

pcRush.com Terms and Conditions: http://www.pcrush.com/legal.asp

The EIT standard can be found at: www.Section508.gov/.

24. PRIME CONTRACTOR ORDERING FROM FEDERAL SUPPLY SCHEDULES.

Prime Contractors (on cost reimbursement contracts) placing orders under Federal Supply Schedules, on behalf of an ordering activity, shall follow the terms of the applicable schedule and authorization and include with each order –

(a) A copy of the authorization from the ordering activity with whom the contractor has the prime contract (unless a copy was previously furnished to the Federal Supply Schedule contractor); and

(b) The following statement:

This order is placed under written authorization from _______ dated _______. In the event of any inconsistency between the terms and conditions of this order and those of your Federal Supply Schedule contract, the latter will govern.

25. INSURANCE—WORK ON A GOVERNMENT INSTALLATION (JAN 1997)(FAR 52.228-5)

(a) The Contractor shall, at its own expense, provide and maintain during the entire performance of this contract, at least the kinds and minimum amounts of insurance required in the Schedule or elsewhere in the contract.

(b) Before commencing work under this contract, the Contractor shall notify the Contracting Officer in writing that the required insurance has been obtained. The policies evidencing required insurance shall contain an endorsement to the effect that any cancellation or any material change adversely affecting the Government's interest shall not be effective—

(1) For such period as the laws of the State in which this contract is to be performed prescribe; or

(2) Until 30 days after the insurer or the Contractor gives written notice to the Contracting Officer, whichever period is longer.

(c) The Contractor shall insert the substance of this clause, including this paragraph (c), in subcontracts under this contract that require work on a Government installation and shall require subcontractors to provide and maintain the insurance required in the Schedule or elsewhere in the contract. The Contractor shall maintain a copy of all subcontractors' proofs of required insurance, and shall make copies available to the Contracting Officer upon request.

26. SOFTWARE INTEROPERABILITY.

Offerors are encouraged to identify within their software items any component interfaces that support open standard interoperability. An item’s interface may be identified as interoperable on the basis of participation in a Government agency-sponsored program or in an independent organization program. Interfaces may be identified by reference to an interface registered in the component registry located at http://www.core.gov.

27. ADVANCE PAYMENTS

A payment under this contract to provide a service or deliver an article for the United States Government may not be more than the value of the service already provided or the article already delivered. Advance or pre-payment is not authorized or allowed under this contract. (31 U.S.C. 3324)

TERMS AND CONDITIONS APPLICABLE TO PURCHASE OF

GENERAL PURPOSE COMMERCIAL INFORMATION TECHNOLOGY NEW

EQUIPMENT(SPECIAL ITEM NUMBER 132-8)

1. MATERIAL AND WORKMANSHIP

All equipment furnished hereunder must satisfactorily perform the function for which it is intended.

2. ORDER

Written orders, EDI orders (GSA Advantage! and FACNET), credit card orders, and orders placed under blanket purchase agreements (BPA) agreements shall be the basis for purchase in accordance with the provisions of this contract. If time of delivery extends beyond the expiration date of the contract, the Contractor will be obligated to meet the delivery and installation date specified in the original order.

For credit card orders and BPAs, telephone orders are permissible.

3. TRANSPORTATION OF EQUIPMENT

FOB DESTINATION. Prices cover equipment delivery to destination, for any location within the geographic scope of this contract.

4. INSTALLATION AND TECHNICAL SERVICES

a. INSTALLATION. When the equipment provided under this contract is not normally self-installable, the Contractor's technical personnel shall be available to the ordering activity, at the ordering activity's location, to install the equipment and to train ordering activity personnel in the use and maintenance of the equipment. The charges, if any, for such services are listed below, or in the price schedule:

All items offered are self-installable.

b. INSTALLATION, DEINSTALLATION, REINSTALLATION. The Davis-Bacon Act (40 U.S.C. 276a- 276a-7) provides that contracts in excess of $2,000 to which the United States or the District of Columbia is a party for construction, alteration, or repair (including painting and decorating) of public buildings or public works with the United States, shall contain a clause that no laborer or mechanic employed directly upon the site of the work shall received less than the prevailing wage rates as determined by the Secretary of Labor. The requirements of the Davis- Bacon Act do not apply if the construction work is incidental to the furnishing of supplies, equipment, or services.

For example, the requirements do not apply to simple installation or alteration of a public building or public work that is incidental to furnishing supplies or equipment under a supply contract. However, if the construction, alteration or repair is segregable and exceeds $2,000, then the requirements of the Davis-Bacon Act applies. The ordering activity issuing the task order against this contract will be responsible for proper administration and enforcement of the Federal labor standards covered by the Davis-Bacon Act. The proper Davis-Bacon wage determination will be issued by the ordering activity at the time a request for quotations is made for applicable construction classified installation, deinstallation, and reinstallation services under SIN 132-8.

c. OPERATING AND MAINTENANCE MANUALS. The Contractor shall furnish the ordering activity with one (1) copy of all operating and maintenance manuals which are normally provided with the equipment being purchased.

5. INSPECTION/ACCEPTANCE

The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The ordering activity reserves the right to inspect or test any equipment that has been tendered for acceptance. The ordering activity may require repair or replacement of nonconforming equipment at no increase in contract price.

The ordering activity must exercise its postacceptance rights (1) within a reasonable time after the defect was discovered or should have been discovered; and (2) before any substantial change occurs in the condition of the item, unless the change is due to the defect in the item.

6. WARRANTY

a. Unless specified otherwise in this contract, the Contractor’s standard commercial warranty as stated in the contract’s commercial pricelist will apply to this contract.

All services provided for in a manufacturer's warranties are direct with the end-user. Upon request, pcRUSH may help to facilitate warranty service and/or assist in communications with the manufacturer.

b. The Contractor warrants and implies that the items delivered hereunder are merchantable and fit for use for the particular purpose described in this contract.

c. Limitation of Liability. Except as otherwise provided by an express or implied warranty, the Contractor will not be liable to the ordering activity for consequential damages resulting from any defect or deficiencies in accepted items.

d. If inspection and repair of defective equipment under this warranty will be performed at the Contractor's plant, the address is as follows: 1325 E. El Segundo, El Segundo, CA 90245

7. PURCHASE PRICE FOR ORDERED EQUIPMENT

The purchase price that the ordering activity will be charged will be the ordering activity purchase price in effect at the time of order placement, or the ordering activity purchase price in effect on the installation date (or delivery date when installation is not applicable), whichever is less.

8. RESPONSIBILITIES OF THE CONTRACTOR

The Contractor shall comply with all laws, ordinances, and regulations (Federal, State, City or otherwise) covering work of this character, and shall include all costs, if any, of such compliance in the prices quoted in this offer.

9. TRADE-IN OF INFORMATION TECHNOLOGY EQUIPMENT

When an ordering activity determines that Information Technology equipment will be replaced, the ordering activity shall follow the contracting policies and procedures in the Federal Acquisition Regulation (FAR), the policies and procedures regarding disposition of information technology excess personal property in the Federal Property Management Regulations (FPMR) (41 CFR 101-43.6), and the policies and procedures on exchange/sale contained in the FPMR (41 CFR part 101-46).

SIN 132-8 PRICING

Atman, Inc. DBA pcRush.com GS-35F-0099W

MFR

Internal Item#

MFR

Part #

Product Description

GSA

Price MSRP

County of

Origin Warran ty Axis 266542 0302-004 Axis M1011 Network Camera $165.96 $175.96 USA 2 Year

$ $Axis 266540 0300-004 Axis M1031-W Network Camera $258.70 $268.70 USA 2 Year

Axis 83977 24889 Axis Outdoor Fixed Housing $277.25 $287.25 USA 2 Year Axis 276280 5015-101 Axis T92A10 Outdoor Housing for

211 221 223M $277.25 $287.25 USA 2 Year

Fellowes 121565 3205701 Fellowes Poweshred P-57Cs Confetti Cut Shredder

$85.47 $95.47 USA 2 Year

Fellowes 121564 3216701 Fellowes Poweshred P-67Cs $137.91 $147.91 USA 3 YearFellowes 121564 3216701 Fellowes Poweshred P 67Cs Confetti Cut Shredder

$137.91 $147.91 USA 3 Year

Fellowes 121580 3219001 Fellowes Powershred SB 80 Paper/CD Shredder

$195.65 $205.65 USA 3 Year

Fellowes 133964 3227901 Fellowes Intellishred PS-79Ci Shredder

$209.17 $219.17 USA 3 Year

Wasp 154154 633808091040 Wasp WCS3905 Bar Code Reader

$161.39 $171.39 USA 2 Year

Wasp 136265 633808121341 Wasp WPS150 Bar Code Reader $278 84 $288 84 USA 2 YearWasp 136265 633808121341 Wasp WPS150 Bar Code Reader $278.84 $288.84 USA 2 Year

Wasp 130690 633808390389 Wasp WLR8905 Handheld Bar Code Reader

$234.94 $244.94 USA 2 Year

Wasp 95683 633808181000 Wasp CCD LR Handheld Bar Code Reader

$194.70 $204.70 USA 2 Year

Wasp 130689 633808390372 Wasp WCS 3905 Bar Code Reader

$177.98 $187.98 USA 1 Year

Micronet 280039 MGT-08SC08A MicroNet Genesis V Tower 8 Bay

U320 SCSI - SATA II - 8TB RAID

Storage System

$2,773.89 $2,999.00 USA 3 Year

Micronet 626933 MGT-08SC16A MicroNet Genesis V Tower 8 Bay

U320 SCSI - SATA II - 16TB

RAID Storage System

$3,328.89 $3,529.00 USA 3 Year

Micronet 280040 MGR-08SC08A MicroNet Genesis V 2U 8 Bay

U320 SCSI - SATA II - 8TB RAID

$2,773.89 $2,999.00 USA 3 Year

U320 SCSI - SATA II - 8TB RAID

Rackmount Storage System

Micronet 626934 MGR-08SC16A MicroNet Genesis V 2U 8 Bay

U320 SCSI - SATA II - 16TB

RAID Rackmount Storage System

$3,328.89 $3,529.00 USA 3 Year

Micronet 302366 MGR-12SC12A MicroNet Genesis V 2U 12 Bay $3,994.89 $4,239.00 USA 3 Year

U320 SCSI - SATA II - 12TB

RAID Rackmount Storage System

Micronet 626950 MGR-12SC24A MicroNet Genesis V 2U 12 Bay

U320 SCSI - SATA II - 24TB

RAID Rackmount Storage System

$4,949.49 $5,249.00 USA 3 Year

Atman, Inc. DBA pcRush.com GS-35F-0099W

MFR

Internal Item#

MFR

Part #

Product Description

GSA

Price MSRP

County of

Origin Warran ty Micronet 280041 MGR-12FC12A MicroNet Genesis V 2U 12 Bay

S $4,716.39 $4,999.00 USA 3 Year

Fibre - SATA II - 12TB RAID Rackmount Storage System

Micronet 626935 MGR-12FC24A MicroNet Genesis V 2U 12 Bay Fibre - SATA II - 24TB RAID Rackmount Storage System

$5,770.89 $6,119.00 USA 3 Year

Micronet 280036 MGR-16FC16A MicroNet Genesis V 3U 16 Bay $7,657.89 $8,119.00 USA 3 YearMicronet 280036 MGR 16FC16A MicroNet Genesis V 3U 16 Bay Fibre - SAS/SATA II - 16TB RAID Rackmount Storage System

$7,657.89 $8,119.00 USA 3 Year

Micronet 626936 MGR-16FC32A MicroNet Genesis V 3U 16 Bay Fibre - SAS/SATA II - 32TB RAID Rackmount Storage System

$8,318.96 $9,419.00 USA 3 Year

Micronet 280037 MGR 16SS16A MicroNet Genesis V 3U 16 Ba $6 825 39 $7 239 00 USA 3 YearMicronet 280037 MGR-16SS16A MicroNet Genesis V 3U 16 Bay

SAS - SAS/SATA II - 16TB RAID

Rackmount Storage System

$6,825.39 $7,239.00 USA 3 Year

Micronet 626937 MGR-16SS32A MicroNet Genesis V 3U 16 Bay

SAS - SAS/SATA II - 32TB RAID

Rackmount Storage System

$8,068.59 $8,549.00 USA 3 Year

Micronet 280038 MGD-16FC16A MicroNet Genesis V 3U 16 Bay Fibre - SAS/SATA II -16TB DUAL 4Gb FC Controller Active-Active

RAID

$10,765.89 $11,419.00 USA 3 Year

Micronet 626938 MGD-16FC32A MicroNet Genesis V 3U 16 Bay Fibre - SAS/SATA II -32TB DUAL 4Gb FC Controller Active-Active

RAID

$11,764.89 $12,469.00 USA 3 Year

RAID

Micronet 102827 PR2500SATA Micronet 2.5TB Platinum RAID SATA, Desktop with e-SATA HBA

$1,186.92 $1,375.00 USA 2 Year

Micronet 102828 PR5000SATA Micronet 5TB Platinum RAID SATA, Desktop with e-SATA HBA

$1,284.12 $1,399.00 USA 2 Year

Micronet 626939 PR7500SATA Micronet 7.5TB Platinum RAID $1,597.32 $1,739.00 USA 2 Year SATA, Desktop with e-SATA HBA

Micronet 501547 PR10000SATA Micronet 10TB Platinum RAID SATA, Desktop with e-SATA HBA

$1,942.92 $1,969.00 USA 2 Year

Micronet 261881 SATA-PCIe2 Micronet 2 Port e-SATA PCI- Express Host bus adpater

$46.44 $59.00 USA 2 Year

Micronet 627089 SATA-PCIx3+1 Micronet 3+1 Port e-SATA PCI-X $59.40 $75.00 USA 2 YearMicronet 627089 SATA-PCIx3+1 Micronet 3+1 Port e-SATA PCI-X Host bus adapter - 1 External and 3 internal ports

$59.40 $75.00 USA 2 Year

Atman, Inc. DBA pcRush.com GS-35F-0099W

MFR

Internal Item#

MFR

Part #

Product Description

GSA

Price MSRP

County of

Origin Warran ty Micronet 236056 SATA-PCIx4 Micronet 4 Port e-SATA PCI-X $73.44 $89.00 USA 2 Year

Host bus adapter Micronet 80892 PR2500SC320 Micronet 2.5TB Platinum RAID

SCSI Desktop SATA-Ultra320 SCSI Hardware RAID

$1,330.89 $1,419.00 USA 1 Year

Micronet 151686 PR5000SC320 Micronet 5TB Platinum RAID SCSI Desktop SATA-Ultra320 SCSI Hardware RAID

$1,552.89 $1,649.00 USA 1 Year

Micronet 625364 PR7500SC320 Micronet 7.5TB Platinum RAID $1,774.89 $1,889.00 USA 1 YearMicronet 625364 PR7500SC320 Micronet 7.5TB Platinum RAID SCSI Desktop SATA-Ultra320 SCSI Hardware RAID

$1,774.89 $1,889.00 USA 1 Year

Micronet 501546 PR10000SC320 Micronet 10TB Platinum RAID SCSI Desktop SATA-Ultra320 SCSI Hardware RAID

$1,996.89 $2,119.00 USA 1 Year

Micronet 85472 PR2500PRO MicroNet 2.5TB Platinum RAID PRO Desktop e-SATA+ FW800 +

USB 2 0

$1,275.39 $1,359.00 USA 1 Year

USB 2.0

Micronet 383972 PR2500U2F Micronet 2.5TB Platinum RAID

Desktop FireWire 800 + USB 2.0 Hardware RAID

$1,197.33 $1,319.00 USA 1 Year

Micronet 155744 PR5000U2F Micronet 5TB Platinum RAID Desktop FireWire 800 + USB 2.0 Hardware RAID

$1,397.49 $1,489.00 USA 1 Year

Micronet 625363 PRDM-500 Micronet 500GB Drive Module for $112.32 $130.00 USA 2 Year Platinum RAID for FW, U2F, and SC Platinum RAIDs

Micronet 625373 PRDM-750 Micronet 750GB Drive Module for Platinum RAID for FW, U2F, and SC Platinum RAIDs

$219.24 $255.00 USA 2 Year

Micronet 312370 PRDM-500SA Micronet 500GB Drive Module for Platinum RAID SATA-U320, Pro, and SATA

$159.43 $189.00 USA 2 Year and SATA.

Micronet 625374 PRDM-750SA Micronet 750GB Drive Module for

Platinum RAID SATA-U320, Pro, and SATA.

$225.33 $255.00 USA 2 Year

Micronet 625375 PRDM-1000SA Micronet 1TB Drive Module for Platinum RAID SATA-U320, U2F, Pro, and SATA

$173.16 $195.00 USA 2 Year

Micronet 627073 PRDM-1500SA Micronet 1.5TB Drive Module for $231.99 $265.00 USA 2 Year Platinum RAID SATA-U320, U2F, Pro, and SATA

Micronet 627074 PRDM-2000SA Micronet 2.0TB Drive Module for Platinum RAID SATA-U320, U2F, Pro, and SATA

$365.19 $411.00 USA 2 Year

Micronet 77537 PRWAR1 Micronet Additional 1 year Extended Warranty for Platinum

RAID

$271.41 $315.00 USA 1 Year

RAID

Atman, Inc. DBA pcRush.com GS-35F-0099W

MFR

Internal Item#

MFR

Part #

Product Description

GSA

Price MSRP

County of

Origin Warran ty Micronet 77538 PRWAR2 Micronet Additional 2 year f $592.92 $689.00 USA 2 Year

Extended Warranty for Platinum

RAID

Transition Networks

222744 M/E-PSW-FX-01-

NA

Stand Alone Media Converter 10/100 RJ45 - 100FX Multimode

ST

$141.17 $150.47 USA Lifetime

Transition Networks

222186 M/E-PSW-FX-

01(SC)-NA

Stand Alone Media Converter 10/100 RJ45 - 100FX Multimode

SC

$141.08 $150.38 USA Lifetime

SC

Transition Networks

222664 M/E-PSW-FX-

01(SM)-NA

Stand Alone Media Converter 10/100 RJ45 - 100FX Singlemode

SC

$331.53 $353.38 USA Lifetime

Transition Networks

222742 E-100BTX-FX-

05-NA

Stand alone media Converter 100 RJ45 - 100FX Multimode ST

$221.46 $236.07 USA Lifetime

Transition Networks

222436 E-100BTX-FX-

05(SC)NA

Stand alone media Converter 100 RJ45 100FX Multimode SC

$215.73 $229.96 USA Lifetime Networks 05(SC)NA RJ45 - 100FX Multimode SC

Transition Networks

222661 SGETF1013-

110-NA

Stand alone media Converter 1000 RJ45 - 1000SX Multimode

SC

$417.98 $445.54 USA Lifetime

Transition Networks

222630 SGETF1014-

110-NA

Stand alone media Converter 1000 RJ45 - 1000SX Singlemode

SC

$695.65 $741.52 USA Lifetime

Transition Networks

222657 SGETF1040-

110-NA

Stand alone media Converter

1000 RJ45 - SFP GBIC

Multimode

$332.37 $354.29 USA Lifetime

USA COMMITMENT TO PROMOTE

SMALL BUSINESS PARTICIPATION

PROCUREMENT PROGRAMS

PREAMBLE

Atman, Inc. dba pcRush.com provides commercial products and services to ordering activities. We are committed to promoting participation of small, small disadvantaged and women-owned small businesses in our contracts. We pledge to provide opportunities to the small business community through reselling opportunities, mentor-protégé programs, joint ventures, teaming arrangements, and subcontracting.

COMMITMENT

To actively seek and partner with small businesses.

To identify, qualify, mentor and develop small, small disadvantaged and women-owned small businesses by purchasing from these businesses whenever practical.

To develop and promote company policy initiatives that demonstrate our support for awarding contracts and subcontracts to small business concerns.

To undertake significant efforts to determine the potential of small, small disadvantaged and women-owned small business to supply products and services to our company.

To insure procurement opportunities are designed to permit the maximum possible participation of small, small disadvantaged, and women-owned small businesses.

To attend business opportunity workshops, minority business enterprise seminars, trade fairs, procurement conferences, etc., to identify and increase small businesses with whom to partner.

To publicize in our marketing publications our interest in meeting small businesses that may be interested in subcontracting opportunities.

We signify our commitment to work in partnership with small, small disadvantaged and women-owned small businesses to promote and increase their participation in ordering activity contracts. To accelerate potential opportunities please contact

Atman, Inc. dba pcRush.com

Frank Khalili Government Division 1325 E. El Segundo Blvd.

El Segundo, CA 90245

Direct: (310) 356-5100 Toll Free: (888) 205-7777, x5144 Fax: (310) 356-5160 Email: gsa@pcrush.com

BEST VALUE

BLANKET PURCHASE AGREEMENT

FEDERAL SUPPLY SCHEDULE

(Insert Customer Name)

In the spirit of the Federal Acquisition Streamlining Act (ordering activity) and Atman, Inc. dba pcRush.com enter into a cooperative agreement to further reduce the administrative costs of acquiring commercial items from the General Services Administration (GSA) Federal Supply Schedule Contract(s).

Federal Supply Schedule contract BPAs eliminate contracting and open market costs such as: search for sources; the development of technical documents, solicitations and the evaluation of offers. Teaming Arrangements are permitted with Federal Supply Schedule Contractors in accordance with Federal Acquisition Regulation (FAR) 9.6.

This BPA will further decrease costs, reduce paperwork, and save time by eliminating the need for repetitive, individual purchases from the schedule contract. The end result is to create a purchasing mechanism for the ordering activity that works better and costs less.

Signatures

Ordering Activity Date Contractor Date

BPA NUMBER_____________