MAS - J2 Associates, LLC - GS35F004AA

AUTHORIZED

INFORMATION TECHNOLOGY SCHEDULE PRICELIST

GENERAL PURPOSE COMMERCIAL INFORMATION TECHNOLOGY

EQUIPMENT, SOFTWARE AND SERVICES

Special Item Number (SIN) 54151S

Information Technology (IT) Professional Services FPDS CODE(s)

D301 IT Facility Operation and Maintenance

D302 IT Systems Development Services

D306 IT Systems Analysis Services

D308 Programming Services

D310 IT Backup and Security Services

D313 Computer Aided Design/Computer Aided Manufacturing (CAD/CAM) Services

D316 IT Network Management Services

D399 Other Information Technology Services, Not Elsewhere Classified

Note 1: All non-professional labor categories must be incidental to and used solely to support hardware, software and/or professional services, and cannot be purchased separately.

Note 2: Offerors and Agencies are advised that the Group 70 – Information Technology Schedule is not to be used as a means to procure services which properly fall under the Brooks Act. These services include, but are not limited to, architectural, engineering, mapping, cartographic production, remote sensing, geographic information systems, and related services. FAR 36.6 distinguishes between mapping services of an A/E nature and mapping services which are not connected nor incidental to the traditionally accepted A/E Services.

Note 3: This solicitation is not intended to solicit for the reselling of IT Professional Services, except for the provision of implementation, maintenance, integration, or training services in direct support of a product. Under such circumstances the services must be performance by the publisher or manufacturer or one of their authorized agents.

J2 Associates, LLC

4732 Wooded Ridge Road, Suite 515, Raleigh, NC 27606

919-949-4707 www.j2assoc.com

Contract Number: GS-35F-004AA

Period Covered by Contract: 04 October 2022 to 03 October 2026

General Services Administration Federal Acquisition Service

Pricelist current through Modification #46, dated July 27, 2022

Products and ordering information in this Authorized Information Technology Schedule Pricelist are also available on the GSA Advantage! System (http://www.gsaadvantage.gov).

http://www.j2assoc.com/

CONTENTS PAGE

INFORMATION FOR ORDERING ACTIVITIES APPLICABLE TO ALL SPECIAL ITEM

NUMBERS

TERMS AND CONDITIONS APPLICABLE TO INFORMATION TECHNOLOGY (IT)

PROFESSIONAL SERVICES (SPECIAL ITEM NUMBER 54151S)

LABOR CATEGORY PRICING

DESCRIPTION OF IT PROFESSIONAL SERVICES LABOR CATEGORIES

USA COMMITMENT TO PROMOTE SMALL BUSINESS PARTICIPATION PROCUREMENT

PROGRAMS

BEST VALUE BLANKET PURCHASE AGREEMENT FEDERAL SUPPLY SCHEDULE

BASIC GUIDELINES FOR USING “CONTRACTOR TEAM ARRANGEMENTS”

TABLE OF CONTENTS

INFORMATION FOR ORDERING ACTIVITIES

APPLICABLE TO ALL SPECIAL ITEM NUMBERS

SPECIAL NOTICE TO AGENCIES: Small Business Participation

SBA strongly supports the participation of small business concerns in the Federal Acquisition Service. To enhance

Small Business Participation SBA policy allows agencies to include in their procurement base and goals, the dollar value of orders expected to be placed against the Federal Supply Schedules, and to report accomplishments against these goals.

For orders exceeding the micro purchase threshold, FAR 8.404 requires agencies to consider the catalogs/pricelists of at least three schedule contractors or consider reasonably available information by using the GSA Advantage! on-line shopping service (www.gsaadvantage.gov). The catalogs/pricelists, GSA Advantage! and the Federal Acquisition

Service Home Page (www.gsa.gov/fas) contain information on a broad array of products and services offered by small business concerns.

This information should be used as a tool to assist ordering activities in meeting or exceeding established small business goals. It should also be used as a tool to assist in including small, small disadvantaged, and women-owned small businesses among those considered when selecting pricelists for a best value determination.

For orders exceeding the micro purchase threshold, customers are to give preference to small business concerns when two or more items at the same delivered price will satisfy their requirement.

1. GEOGRAPHIC SCOPE OF CONTRACT:

Domestic delivery is delivery within the 48 contiguous states, Alaska, Hawaii, Puerto Rico, Washington, DC, and U.S.

Territories. Domestic delivery also includes a port or consolidation point, within the aforementioned areas, for orders received from overseas activities.

Overseas delivery is delivery to points outside of the 48 contiguous states, Washington, DC, Alaska, Hawaii, Puerto Rico, and U.S. Territories.

Offerors are requested to check one of the following boxes:

[X] The Geographic Scope of Contract will be domestic and overseas delivery.

[ ] The Geographic Scope of Contract will be overseas delivery only.

[ ] The Geographic Scope of Contract will be domestic delivery only.

For Special Item Number 54151S Wireless Services ONLY, if awarded, list the limited geographic coverage area:

2. CONTRACTOR’S ORDERING ADDRESS AND PAYMENT INFORMATION:

PAYMENT ADDRESS:

J2 Associates, LLC

4732 Wooded Ridge Road, Suite 515, Raleigh, NC 27606

919-949-4707

Contractor must accept the credit card for payments equal to or less than the micro-purchase for oral or written orders under this contract. The Contractor and the ordering agency may agree to use the credit card for dollar amounts over the micro-purchase threshold (See GSAR 552.232-79 Payment by Credit Card). In addition, bank account information for wire transfer payments will be shown on the invoice.

http://www.gsa.gov/fas)

The following telephone number(s) can be used by ordering activities to obtain technical and/or ordering assistance:

Attn: John Johnston

Phone: 919-949-4707

Fax: 1-866-264-5252

E-mail: jjohnston@j2assoc.com

When Authorized Dealers are allowed by the Contractor to bill ordering activities and accept payment, the order and/or payment must be in the name of the Contractor, in care of the Authorized Dealer.

3. LIABILITY FOR INJURY OR DAMAGE

The Contractor shall not be liable for any injury to ordering activity personnel or damage to ordering activity property arising from the use of equipment maintained by the Contractor, unless such injury or damage is due to the fault or negligence of the Contractor.

4. STATISTICAL DATA FOR GOVERNMENT ORDERING OFFICE COMPLETION OF

STANDARD FORM 279:

Block 9: G. Order/Modification under Federal schedule

Block 16: Data Universal Numbering System (DUNS) Number: 826409679

Block 30: Type of Contractor: A. Small Disadvantaged Business

B. Other Small Business

Block 31: Woman-Owned Small Business: No

Block 37: Contractor's Taxpayer Identification Number (TIN): 26-2526146

Block 40: Veteran Owned Small Business (VOSB): A. Service Disabled Veteran Owned

Small Business

4a. CAGE Code: 53AS4

4b. Contractor has registered with the Central Contractor Registration Database.

5. FOB DESTINATION

6. DELIVERY SCHEDULE

a. TIME OF DELIVERY: The Contractor shall deliver to destination within the number of calendar days after receipt of order (ARO), as set forth below:

SPECIAL ITEM NUMBER DELIVERY TIME (Days ARO)

IT Services (54151S) – Expedited As negotiated with Ordering Agency

IT Services (54151S) – Normal As negotiated with Ordering Agency mailto:jjohnston@j2assoc.com

b. URGENT REQUIREMENTS: When the Federal Supply Schedule contract delivery period does not meet the bona fide urgent delivery requirements of an ordering activity, ordering activities are encouraged, if time permits, to contact the Contractor for the purpose of obtaining accelerated delivery. The Contractor shall reply to the inquiry within 3 workdays after receipt. (Telephonic replies shall be confirmed by the Contractor in writing.) If the Contractor offers an accelerated delivery time acceptable to the ordering activity, any order(s) placed pursuant to the agreed upon accelerated delivery time frame shall be delivered within this shorter delivery time and in accordance with all other terms and conditions of the contract.

c. i. SIN 54151S and SIN OLM, ACCELERATED SERVICE DELIVERY (7 calendar days or less): the time required for COMSATCOM services to be available after order award. Under Accelerated Service Task Orders, service acceptance testing, unless otherwise required by the satellite provider or host nation, shall be deferred until Ordering

Activity operations permit.

ii. SIN 54151S and SIN OLM, TIME-CRITICAL DELIVERY (4 hours or less): the time required for

COMSATCOM services to be available after order award. Under Time-Critical Task Orders, service acceptance testing unless otherwise required by the satellite provider or host nation shall be deferred until Ordering Activity operations permit. Time-Critical Delivery shall be predicated on the availability of COMSATCOM transponder capacity

(contracted bandwidth and power, pre-arranged Host Nation Agreements, frequency clearance) or COMSATCOM subscription services (bandwidth, terminals, network resources, etc.).

iii. For SIN 54151S and SIN OLM, EXTENDED SERVICE DELIVERY TIMES: the time required under extenuating circumstances for COMSATCOM services to be available after order award. Such extenuating circumstances may include extended time required for host nation agreements or landing rights, or other time intensive service delivery requirements as defined in the individual requirement. Any such extended delivery times will be negotiated between the Ordering Activity and Contractor.

7. DISCOUNTS: Prices shown are NET Prices; Basic Discounts have been deducted.

a. Prompt Payment: 3% - 15 days from receipt of invoice

0% - 30 days from receipt of invoice

b. Quantity: None

c. Dollar Volume: On a case by case basis at the maximum dollar threshold

d. Other: None

8. TRADE AGREEMENTS ACT OF 1979, as amended:

All items are U.S. made end products, designated country end products, Caribbean Basin country end products, Canadian end products, or Mexican end products as defined in the Trade Agreements Act of 1979, as amended.

9. STATEMENT CONCERNING AVAILABILITY OF EXPORT PACKING:

2. Small Requirements: The minimum dollar value of orders to be issued is $100.00.

10. MAXIMUM ORDER (All dollar amounts are exclusive of any discount for prompt payment.)

a. The Maximum Order for the following Special Item Numbers (SINs) is $500,000:

Special Item Number 54151S - Information Technology Professional Services

11. ORDERING PROCEDURES FOR FEDERAL SUPPLY SCHEDULE CONTRACTS

Ordering activities shall use the ordering procedures of Federal Acquisition Regulation (FAR) 8.405 when placing an order or establishing a BPA for supplies or services. These procedures apply to all schedules.

a. FAR 8.405-1 Ordering procedures for supplies, and services not requiring a statement of work.

b. FAR 8.405-2 Ordering procedures for services requiring a statement of work.

12. FEDERAL INFORMATION TECHNOLOGY/TELECOMMUNICATION STANDARDS

REQUIREMENTS: ordering activities acquiring products from this Schedule must comply with the provisions of the

Federal Standards Program, as appropriate (reference: NIST Federal Standards Index). Inquiries to determine whether or not specific products listed herein comply with Federal Information Processing Standards (FIPS) or Federal

Telecommunication Standards (FED-STDS), which are cited by ordering activities, shall be responded to promptly by the Contractor.

13.1 FEDERAL INFORMATION PROCESSING STANDARDS PUBLICATIONS (FIPS PUBS):

Information Technology products under this Schedule that do not conform to Federal Information Processing Standards

(FIPS) should not be acquired unless a waiver has been granted in accordance with the applicable "FIPS Publication."

Federal Information Processing Standards Publications (FIPS PUBS) are issued by the U.S. Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security Act. Information concerning their availability and applicability should be obtained from the National Technical Information Service (NTIS), 5285

Port Royal Road, Springfield, Virginia 22161. FIPS PUBS include voluntary standards when these are adopted for

Federal use. Individual orders for FIPS PUBS should be referred to the NTIS Sales Office, and orders for subscription service should be referred to the NTIS Subscription Officer, both at the above address, or telephone number (703) 487-

4650.

13.2 FEDERAL TELECOMMUNICATION STANDARDS (FED-STDS): Telecommunication products under this Schedule that do not conform to Federal Telecommunication Standards (FED-STDS) should not be acquired unless a waiver has been granted in accordance with the applicable "FED-STD." Federal Telecommunication Standards are issued by the U.S. Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to

National Security Act. Ordering information and information concerning the availability of FED-STDS should be obtained from the GSA, Federal Acquisition Service, Specification Section, 470 East L’Enfant Plaza, Suite 8100, SW, Washington, DC 20407, telephone number (202)619-8925. Please include a self-addressed mailing label when requesting information by mail. Information concerning their applicability can be obtained by writing or calling the

U.S. Department of Commerce, National Institute of Standards and Technology, Gaithersburg, MD 20899, telephone number (301)975-2833.

13. CONTRACTOR TASKS / SPECIAL REQUIREMENTS (C-FSS-370) (NOV 2003)

(a) Security Clearances: The Contractor may be required to obtain/possess varying levels of security clearances in the performance of orders issued under this contract. All costs associated with obtaining/possessing such security clearances should be factored into the price offered under the Multiple Award Schedule.

(b) Travel: The Contractor may be required to travel in performance of orders issued under this contract. Allowable travel and per diem charges are governed by Pub .L. 99-234 and FAR Part 31, and are reimbursable by the ordering agency or can be priced as a fixed price item on orders placed under the Multiple Award Schedule.

Travel in performance of a task order will only be reimbursable to the extent authorized by the ordering agency.

The Industrial Funding Fee does NOT apply to travel and per diem charges.

(c) Certifications, Licenses and Accreditations: As a commercial practice, the Contractor may be required to obtain/possess any variety of certifications, licenses and accreditations for specific FSC/service code classifications offered. All costs associated with obtaining/ possessing such certifications, licenses and accreditations should be factored into the price offered under the Multiple Award Schedule program.

(d) Insurance: As a commercial practice, the Contractor may be required to obtain/possess insurance coverage for specific FSC/service code classifications offered. All costs associated with obtaining/possessing such insurance should be factored into the price offered under the Multiple Award Schedule program.

(e) Personnel: The Contractor may be required to provide key personnel, resumes or skill category descriptions in the performance of orders issued under this contract. Ordering activities may require agency approval of additions or replacements to key personnel.

(f) Organizational Conflicts of Interest: Where there may be an organizational conflict of interest as determined by the ordering agency, the Contractor’s participation in such order may be restricted in accordance with FAR Part

9.5.

(g) Documentation/Standards: The Contractor may be requested to provide products or services in accordance with rules, regulations, OMB orders, standards and documentation as specified by the agency’s order.

(h) Data/Deliverable Requirements: Any required data/deliverables at the ordering level will be as specified or negotiated in the agency’s order.

(i) Government-Furnished Property: As specified by the agency’s order, the Government may provide property, equipment, materials or resources as necessary.

(j) Availability of Funds: Many Government agencies’ operating funds are appropriated for a specific fiscal year.

Funds may not be presently available for any orders placed under the contract or any option year. The

Government’s obligation on orders placed under this contract is contingent upon the availability of appropriated funds from which payment for ordering purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are available to the ordering Contracting Officer.

(k) Overtime: For professional services, the labor rates in the Schedule should not vary by virtue of the Contractor having worked overtime. For services applicable to the Service Contract Act (as identified in the Schedule), the labor rates in the Schedule will vary as governed by labor laws (usually assessed a time and a half of the labor rate).

14. CONTRACT ADMINISTRATION FOR ORDERING ACTIVITIES: Any ordering activity, with respect to any one or more delivery orders placed by it under this contract, may exercise the same rights of termination as might the GSA Contracting Officer under provisions of FAR 52.212-4, paragraphs (l) Termination for the ordering activity’s convenience, and (m) Termination for Cause (See 52.212-4)

15. GSA ADVANTAGE!

GSA Advantage! is an on-line, interactive electronic information and ordering system that provides on-line access to vendors' schedule prices with ordering information. GSA Advantage! will allow the user to perform various searches across all contracts including, but not limited to:

(1) Manufacturer;

(2) Manufacturer's Part Number; and

(3) Product categories.

Agencies can browse GSA Advantage! by accessing the Internet World Wide Web utilizing a browser (ex.: NetScape).

The Internet address is http://www.gsaadvantage.gov

16. PURCHASE OF OPEN MARKET ITEMS

NOTE: Open Market Items are also known as incidental items, noncontract items, non-Schedule items, and items not on a Federal Supply Schedule contract. Ordering Activities procuring open market items must follow FAR 8.402(f).

For administrative convenience, an ordering activity contracting officer may add items not on the Federal Supply

Multiple Award Schedule (MAS) -- referred to as open market items -- to a Federal Supply Schedule blanket purchase agreement (BPA) or an individual task or delivery order, only if-

(1) All applicable acquisition regulations pertaining to the purchase of the items not on the Federal

Supply Schedule have been followed (e.g., publicizing (Part 5), competition requirements (Part 6), acquisition of commercial items (Part 12), contracting methods (Parts 13, 14, and 15), and small business programs (Part

19));

(2) The ordering activity contracting officer has determined the price for the items not on the Federal

Supply Schedule is fair and reasonable;

(3) The items are clearly labeled on the order as items not on the Federal Supply Schedule; and

(4) All clauses applicable to items not on the Federal Supply Schedule are included in the order.

17. CONTRACTOR COMMITMENTS, WARRANTIES AND REPRESENTATIONS

a. For the purpose of this contract, commitments, warranties and representations include, in addition to those agreed to for the entire schedule contract:

(1) Time of delivery/installation quotations for individual orders;

(2) Technical representations and/or warranties of products concerning performance, total system performance and/or configuration, physical, design and/or functional characteristics and capabilities of a product/equipment/ service/software package submitted in response to requirements which result in orders under this schedule contract.

(3) Any representations and/or warranties concerning the products made in any literature, description, drawings and/or specifications furnished by the Contractor.

b. The above is not intended to encompass items not currently covered by the GSA Schedule contract.

c. The maintenance/repair service provided is the standard commercial terms and conditions for the type of products and/or services awarded.

18. OVERSEAS ACTIVITIES

The terms and conditions of this contract shall apply to all orders for installation, maintenance and repair of equipment in areas listed in the pricelist outside the 48 contiguous states and the District of Columbia, except as indicated below:

http://www.gsaadvantage.gov/

Upon request of the Contractor, the ordering activity may provide the Contractor with logistics support, as available, in accordance with all applicable ordering activity regulations. Such ordering activity support will be provided on a reimbursable basis, and will only be provided to the Contractor's technical personnel whose services are exclusively required for the fulfillment of the terms and conditions of this contract.

19. BLANKET PURCHASE AGREEMENTS (BPAs)

The use of BPAs under any schedule contract to fill repetitive needs for supplies or services is allowable. BPAs may be established with one or more schedule contractors. The number of BPAs to be established is within the discretion of the ordering activity establishing the BPA and should be based on a strategy that is expected to maximize the effectiveness of the BPA(s). Ordering activities shall follow FAR 8.405-3 when creating and implementing BPA(s).

20. CONTRACTOR TEAM ARRANGEMENTS

Contractors participating in contractor team arrangements must abide by all terms and conditions of their respective contracts. This includes compliance with Clauses 552.238-74, Industrial Funding Fee and Sales Reporting, i.e., each contractor (team member) must report sales and remit the IFF for all products and services provided under its individual contract.

21. INSTALLATION, DEINSTALLATION, REINSTALLATION

The Davis-Bacon Act (40 U.S.C. 276a-276a-7) provides that contracts in excess of $2,000 to which the United States or the District of Columbia is a party for construction, alteration, or repair (including painting and decorating) of public buildings or public works with the United States, shall contain a clause that no laborer or mechanic employed directly upon the site of the work shall receive less than the prevailing wage rates as determined by the Secretary of Labor.

The requirements of the Davis-Bacon Act do not apply if the construction work is incidental to the furnishing of supplies, equipment, or services. For example, the requirements do not apply to simple installation or alteration of a public building or public work that is incidental to furnishing supplies or equipment under a supply contract. However, if the construction, alteration or repair is agreeable and exceeds $2,000, then the requirements of the Davis-Bacon Act applies.

The ordering activity issuing the task order against this contract will be responsible for proper administration and enforcement of the Federal labor standards covered by the Davis-Bacon Act. The proper Davis-Bacon wage determination will be issued by the ordering activity at the time a request for quotations is made for applicable construction classified installation, de-installation, and reinstallation services under SIN 54151S or OLM.

22. SECTION 508 COMPLIANCE.

I certify that in accordance with 508 of the Rehabilitation Act of 1973, as amended (29 U.S.C. 794d), FAR 39.2, and the

Architectural and Transportation Barriers Compliance Board Electronic and Information Technology (EIT)

Accessibility Standards (36 CFR 1194) General Services Administration (GSA), that all IT hardware/software/services are 508 compliant:

Yes X

No

The offeror is required to submit with its offer a designated area on its website that outlines the Voluntary Product

Accessibility Template (VPAT) or equivalent qualification, which ultimately becomes the Government Product

Accessibility Template (GPAT). Section 508 compliance information on the supplies and services in this contract are available at the following website address (URL):

www.j2assoc.com

The EIT standard can be found at: www.Section508.gov/.

23. PRIME CONTRACTOR ORDERING FROM FEDERAL SUPPLY SCHEDULES.

Prime Contractors (on cost reimbursement contracts) placing orders under Federal Supply Schedules, on behalf of an ordering activity, shall follow the terms of the applicable schedule and authorization and include with each order –

(a) A copy of the authorization from the ordering activity with whom the contractor has the prime contract (unless a copy was previously furnished to the Federal Supply Schedule contractor); and

(b) The following statement:

This order is placed under written authorization from dated . In the event of any inconsistency between the terms and conditions of this order and those of your Federal Supply

Schedule contract, the latter will govern.

24. INSURANCE—WORK ON A GOVERNMENT INSTALLATION (JAN 1997)(FAR 52.228-5)

(a) The Contractor shall, at its own expense, provide and maintain during the entire performance of this contract, at least the kinds and minimum amounts of insurance required in the Schedule or elsewhere in the contract.

(b) Before commencing work under this contract, the Contractor shall notify the Contracting Officer in writing that the required insurance has been obtained. The policies evidencing required insurance shall contain an endorsement to the effect that any cancellation or any material change adversely affecting the Government's interest shall not be effective—

(1) For such period as the laws of the State in which this contract is to be performed prescribe; or

(2) Until 30 days after the insurer or the Contractor gives written notice to the Contracting Officer, whichever period is longer.

(c) The Contractor shall insert the substance of this clause, including this paragraph (c), in subcontracts under this contract that require work on a Government installation and shall require subcontractors to provide and maintain the insurance required in the Schedule or elsewhere in the contract. The Contractor shall maintain a copy of all subcontractors' proofs of required insurance, and shall make copies available to the

Contracting Officer upon request.

25. SOFTWARE INTEROPERABILITY.

Offerors are encouraged to identify within their software items any component interfaces that support open standard interoperability. An item’s interface may be identified as interoperable on the basis of participation in a Government agency-sponsored program or in an independent organization program. Interfaces may be identified by reference to an interface registered in the component registry located at http://www.core.gov.

26. ADVANCE PAYMENTS

A payment under this contract to provide a service or deliver an article for the United States Government may not be more than the value of the service already provided or the article already delivered. Advance or pre-payment is not authorized or allowed under this contract. (31 U.S.C. 3324) http://www.section508.gov/ http://www.core.gov/

TERMS AND CONDITIONS APPLICABLE TO INFORMATION TECHNOLOGY (IT)

PROFESSIONAL SERVICES (SPECIAL ITEM NUMBER 54151S)

****NOTE: All non-professional labor categories must be incidental to, and used solely to support professional services, and cannot be purchased separately.

1. SCOPE

a. The prices, terms and conditions stated under Special Item Number 54151S Information Technology

Professional Services apply exclusively to IT Professional Services within the scope of this Information Technology

Schedule.

b. The Contractor shall provide services at the Contractor’s facility and/or at the ordering activity location, as agreed to by the Contractor and the ordering activity.

2. PERFORMANCE INCENTIVES I-FSS-60 Performance Incentives (April 2000)

a. Performance incentives may be agreed upon between the Contractor and the ordering activity on individual fixed price orders or Blanket Purchase Agreements under this contract.

b. The ordering activity must establish a maximum performance incentive price for these services and/or total solutions on individual orders or Blanket Purchase Agreements.

c. Incentives should be designed to relate results achieved by the contractor to specified targets. To the maximum extent practicable, ordering activities shall consider establishing incentives where performance is critical to the ordering activity’s mission and incentives are likely to motivate the contractor. Incentives shall be based on objectively measurable tasks.

3. ORDER

a. Agencies may use written orders, EDI orders, blanket purchase agreements, individual purchase orders, or task orders for ordering services under this contract. Blanket Purchase Agreements shall not extend beyond the end of the contract period; all services and delivery shall be made and the contract terms and conditions shall continue in effect until the completion of the order. Orders for tasks which extend beyond the fiscal year for which funds are available shall include FAR 52.232-19 (Deviation – May 2003) Availability of Funds for the Next Fiscal Year. The purchase order shall specify the availability of funds and the period for which funds are available.

b. All task orders are subject to the terms and conditions of the contract. In the event of conflict between a task order and the contract, the contract will take precedence.

4. PERFORMANCE OF SERVICES

a. The Contractor shall commence performance of services on the date agreed to by the Contractor and the ordering activity.

b. The Contractor agrees to render services only during normal working hours, unless otherwise agreed to by the

Contractor and the ordering activity.

c. The ordering activity should include the criteria for satisfactory completion for each task in the Statement of

Work or Delivery Order. Services shall be completed in a good and workmanlike manner.

d. Any Contractor travel required in the performance of IT Services must comply with the Federal Travel Regulation or Joint Travel Regulations, as applicable, in effect on the date(s) the travel is performed. Established

Federal Government per diem rates will apply to all Contractor travel. Contractors cannot use GSA city pair contracts.

5. STOP-WORK ORDER (FAR 52.242-15) (AUG 1989)

(a) The Contracting Officer may, at any time, by written order to the Contractor, require the Contractor to stop all, or any part, of the work called for by this contract for a period of 90 days after the order is delivered to the Contractor, and for any further period to which the parties may agree. The order shall be specifically identified as a stop-work order issued under this clause. Upon receipt of the order, the Contractor shall immediately comply with its terms and take all reasonable steps to minimize the incurrence of costs allocable to the work covered by the order during the period of work stoppage. Within a period of 90 days after a stop-work is delivered to the Contractor, or within any extension of that period to which the parties shall have agreed, the Contracting Officer shall either-

(1) Cancel the stop-work order; or

(2) Terminate the work covered by the order as provided in the Default, or the Termination for

Convenience of the Government, clause of this contract.

(b) If a stop-work order issued under this clause is canceled or the period of the order or any extension thereof expires, the Contractor shall resume work. The Contracting Officer shall make an equitable adjustment in the delivery schedule or contract price, or both, and the contract shall be modified, in writing, accordingly, if-

(1) The stop-work order results in an increase in the time required for, or in the Contractor's cost properly allocable to, the performance of any part of this contract; and

(2) The Contractor asserts its right to the adjustment within 30 days after the end of the period of work stoppage; provided, that, if the Contracting Officer decides the facts justify the action, the Contracting Officer may receive and act upon the claim submitted at any time before final payment under this contract.

(c) If a stop-work order is not canceled and the work covered by the order is terminated for the convenience of the

Government, the Contracting Officer shall allow reasonable costs resulting from the stop-work order in arriving at the termination settlement.

(d) If a stop-work order is not canceled and the work covered by the order is terminated for default, the

Contracting Officer shall allow, by equitable adjustment or otherwise, reasonable costs resulting from the stop-work order.

6. INSPECTION OF SERVICES

In accordance with FAR 52.212-4 CONTRACT TERMS AND CONDITIONS--COMMERCIAL ITEMS (MAR

2009) (DEVIATION I - FEB 2007) for Firm-Fixed Price orders and FAR 52.212-4 CONTRACT TERMS AND

CONDITIONS COMMERCIAL ITEMS (MAR 2009) (ALTERNATE I OCT 2008) (DEVIATION I – FEB

2007) applies to Time-and-Materials and Labor-Hour Contracts orders placed under this contract.

7. RESPONSIBILITIES OF THE CONTRACTOR

The Contractor shall comply with all laws, ordinances, and regulations (Federal, State, City, or otherwise) covering work of this character. If the end product of a task order is software, then FAR 52.227-14 (Dec 2007) Rights in Data –

General, may apply.

8. RESPONSIBILITIES OF THE ORDERING ACTIVITY

Subject to security regulations, the ordering activity shall permit Contractor access to all facilities necessary to perform the requisite IT Professional Services.

9. INDEPENDENT CONTRACTOR

All IT Professional Services performed by the Contractor under the terms of this contract shall be as an independent

Contractor, and not as an agent or employee of the ordering activity.

10. ORGANIZATIONAL CONFLICTS OF INTEREST

a. Definitions.

“Contractor” means the person, firm, unincorporated association, joint venture, partnership, or corporation that is a party to this contract.

“Contractor and its affiliates” and “Contractor or its affiliates” refers to the Contractor, its chief executives, directors, officers, subsidiaries, affiliates, subcontractors at any tier, and consultants and any joint venture involving the

Contractor, any entity into or with which the Contractor subsequently merges or affiliates, or any other successor or assignee of the Contractor.

An “Organizational conflict of interest” exists when the nature of the work to be performed under a proposed ordering activity contract, without some restriction on ordering activities by the Contractor and its affiliates, may either (i) result in an unfair competitive advantage to the Contractor or its affiliates or (ii) impair the Contractor’s or its affiliates’ objectivity in performing contract work.

b. To avoid an organizational or financial conflict of interest and to avoid prejudicing the best interests of the ordering activity, ordering activities may place restrictions on the Contractors, its affiliates, chief executives, directors, subsidiaries and subcontractors at any tier when placing orders against schedule contracts. Such restrictions shall be consistent with FAR 9.505 and shall be designed to avoid, neutralize, or mitigate organizational conflicts of interest that might otherwise exist in situations related to individual orders placed against the schedule contract. Examples of situations, which may require restrictions, are provided at FAR 9.508.

11. INVOICES

The Contractor, upon completion of the work ordered, shall submit invoices for IT Professional services. Progress payments may be authorized by the ordering activity on individual orders if appropriate. Progress payments shall be based upon completion of defined milestones or interim products. Invoices shall be submitted monthly for recurring services performed during the preceding month.

12. PAYMENTS

For firm-fixed price orders the ordering activity shall pay the Contractor, upon submission of proper invoices or vouchers, the prices stipulated in this contract for service rendered and accepted. Progress payments shall be made only when authorized by the order. For time-and-materials orders, the Payments under Time-and-Materials and Labor-Hour

Contracts at FAR 52.212-4 (MAR 2009) (ALTERNATE I – OCT 2008) (DEVIATION I – FEB 2007) applies to time-and-materials orders placed under this contract. For labor-hour orders, the Payment under Time-and-Materials and

Labor-Hour Contracts at FAR 52.212-4 (MAR 2009) (ALTERNATE I – OCT 2008) (DEVIATION I – FEB 2007) applies to labor-hour orders placed under this contract. 52.216-31(Feb 2007) Time-and-Materials/Labor-Hour Proposal

Requirements—Commercial Item Acquisition As prescribed in 16.601(e)(3), insert the following provision:

(a) The Government contemplates award of a Time-and-Materials or Labor-Hour type of contract resulting from this solicitation.

(b) The offeror must specify fixed hourly rates in its offer that include wages, overhead, general and administrative expenses, and profit. The offeror must specify whether the fixed hourly rate for each labor category applies to labor performed by—

(1) The offeror;

(2) Subcontractors; and/or

(3) Divisions, subsidiaries, or affiliates of the offeror under a common control.

13. RESUMES

Resumes shall be provided to the GSA Contracting Officer or the user ordering activity upon request.

14. INCIDENTAL SUPPORT COSTS

Incidental support costs are available outside the scope of this contract. The costs will be negotiated separately with the ordering activity in accordance with the guidelines set forth in the FAR.

15. APPROVAL OF SUBCONTRACTS

The ordering activity may require that the Contractor receive, from the ordering activity's Contracting Officer, written consent before placing any subcontract for furnishing any of the work called for in a task order.

16. DESCRIPTION OF IT PROFESSIONAL SERVICES AND PRICING

a. The Contractor shall provide a description of each type of IT Service offered under Special Item Numbers

54151S IT Professional Services should be presented in the same manner as the Contractor sells to its commercial and other ordering activity customers. If the Contractor is proposing hourly rates, a description of all corresponding commercial job titles (labor categories) for those individuals who will perform the service should be provided.

b. Pricing for all IT Professional Services shall be in accordance with the Contractor’s customary commercial practices; e.g., hourly rates, monthly rates, term rates, and/or fixed prices, minimum general experience and minimum education.

The following is an example of the manner in which the description of a commercial job title should be presented:

EXAMPLE: Commercial Job Title: System Engineer

Minimum/General Experience: Three (3) years of technical experience which applies to systems analysis and design techniques for complex computer systems. Requires competence in all phases of systems analysis techniques, concepts and methods; also requires knowledge of available hardware, system software, input/output devices, structure and management practices.

Functional Responsibility: Guides users in formulating requirements, advises alternative approaches, conducts feasibility studies.

Minimum Education: Bachelor’s Degree in Computer Science

LABOR CATEGORY PRICING

J2 Associates, LLC INFORMATION TECHNOLOGY SERVICES

PRODUCTS & SERVICES PRICE LIST SIN 54151S

Period: October 4, 2017 – October 3, 2026

J2 GSA Labor Categories GSA Rate Oct 4, 2022

GSA Rate Oct 4, 2023

GSA Rate Oct 4, 2024

GSA Rate Oct 4, 2025

GSA Rate Oct 4, 2026

Subject Matter Expert $233.09 $240.08 $247.28 $254.70 $262.34

Program Manager $196.38 $202.27 $208.34 $214.59 $210.03

Operations Manager $182.90 $188.38 $194.03 $199.85 $205.85

System Architect $181.65 $187.10 $192.71 $198.49 $204.44

Network Manager/Administrator $179.11 $184.48 $190.01 $195.71 $201.58

Project/Task Order Manager $170.59 $175.70 $180.97 $186.40 $191.99

System Security Engineer $153.54 $158.15 $162.89 $167.78 $172.81

Network Engineer $140.73 $144.95 $149.30 $153.78 $158.39

Computer Programmer $138.29 $142.44 $146.71 $151.11 $155.64

Software Engineer $137.36 $141.48 $145.72 $150.09 $154.59

Security Risk/Threat Specialist $130.50 $134.41 $138.44 $142.59 $146.87

Database Specialist $125.38 $129.14 $133.01 $137.00 $141.11

Information Engineer $115.54 $119.00 $122.57 $126.25 $130.04

Systems Analyst $112.58 $115.96 $119.44 $123.02 $119.44

Systems Engineer $112.34 $117.95 $121.49 $125.13 $128.88

Network Technician $111.85 $115.20 $118.66 $122.22 $125.89

Communications Manager $111.59 $114.94 $118.39 $121.94 $125.60

Technical Writer $110.03 $113.33 $116.73 $120.23 $123.84

Technical Training Specialist $108.26 $111.50 $114.85 $118.30 $121.85

Communications Network

Technician

$102.35 $105.42 $108.58 $111.84 $115.20

Program Security Specialist $98.73 $101.69 $104.74 $107.88 $111.12

Financial Analyst $94.42 $97.25 $100.17 $103.17 $106.26

Data Communications Control

Technician

$93.61 $96.42 $99.31 $102.29 $105.36

Quality Specialist $90.45 $93.16 $95.95 $98.83 $101.79

Electronics/Computer Technician $89.91 $92.60 $95.38 $98.24 $101.19

Engineering Technician $89.56 $92.25 $95.02 $97.87 $100.81

Systems Operator $67.05 $69.06 $71.13 $73.26 $75.46

Administrative Assistant $59.80 $61.59 $63.44 $65.34 $67.30

Administrative Support Specialist $54.74 $56.38 $58.07 $59.81 $61.60

Data Specialist $47.41 $48.83 $50.29 $51.80 $53.35

DESCRIPTION OF IT PROFESSIONAL SERVICES LABOR CATEGORIES

IT-001 Commercial Job Title: Subject Matter Expert

Minimum/General Experience: Eight years direct experience, in the last ten years.

Functional Responsibility: Defines problems and analyzes and develops plans and requirements in the subject matter area for complex systems. Coordinates and manages the preparation of analysis, evaluations, and recommendations for proper implementation of programs and system specifications in the following areas: Information Systems Architecture, Automation, Telecommunications, Networking, Communication

Protocols, Software, Electronic Email, Modeling and Simulation, Data Storage and Retrieval, etc.

Minimum Education: Bachelor’s Degree. With at least 15 years of general experience of which 12 years is directly related experience, a degree is not required.

IT-002 Commercial Job Title: Program Manager

Minimum/General Experience: Fifteen years direct experience in the last 20 years.

Functional Responsibility: Accountable for all aspects of program performance. Directs the performance of a variety of related projects, which may be organized by technology, program or client. Oversees the technology development and/or application, marketing, and resource allocation within program client base.

Program areas typically represent more than three functional areas that may include engineering, systems analysis, quality control, administration, etc. Typically reports to a senior manager or corporate officer.

Minimum Education: Advanced degree in a relevant discipline. With at least 25 years of general experience of which 20 years is directly related experience, an advanced degree is not required.

IT-003 Commercial Job Title: Operations Manager

Minimum/General Experience: Five years direct experience in the last seven years.

Functional Responsibility: Supervises and administers computer operations. Schedules machine time and directs data entry efforts. Provides users with computer output. Ensures production schedules are met.

Ensures computer system resources are used effectively. Coordinates the resolution of production-related problems. Ensures proper relationships are established between customers, teaming partners, and vendors to facilitate the delivery of information technology services. Provides users with computer output. Supervises staff operations.

Minimum Education: Associate’s degree in a relevant discipline. With at least ten years of general experience of which eight years is directly related experience, a degree is not required.

LABOR CATEGORY DESCRIPTIONS

IT-004 Commercial Job Title: System Architect

Minimum/General Experience: Seven years direct experience in the last ten years.

Functional Responsibility: Plans and performs systems and networking engineering research, design development, and other assignments in conformance with system and network design, engineering, and customer specifications. Provides assistance and performs general technical tasks for computer/telephony integration. Performs general technical support in one or more specific areas of research associated with computer or telecommunications network interoperability or integration. Supervises teams of Senior Systems

Engineers, Network Engineers, Senior Network Engineers, and Network Engineers through project completion and is considered a Subject Matter Expert (SME) in one or more specific areas of computer system design and networking. Responsible for highly complex technical/engineering projects.

Independently performs a variety of system design and engineering tasks which are broad in nature and are concerned with design and implementation of major enterprise systems development and integration, including supporting personnel, hardware, software, and support facilities and/or equipment.

Minimum Education: Advanced degree in a related discipline. With at least 12 years of general experience of which nine years is directly related experience, an advanced degree is not required.

IT-005 Commercial Job Title: Network Manager/Administrator

Minimum/General Experience: Four years direct experience in the last five years.

Functional Responsibility: Responsible for developing, evaluating and maintaining the configuration and operation of Local Area Networks (LAN) and Wide Area Networks (WAN), and supporting telecommunications systems. Responsible for implementing, archiving, backup, and restoration procedures.

Performs capacity analysis and optimization studies. Researches and evaluates new LAN and WAN products to determine to enhance network performance. Recommends purchase, configuration, and installation of hardware, software and telecommunication equipment. Manages LAN and WAN security and network performance. Establishes and implements LAN policies, procedures, and standards and ensures their conformance with information systems and client objectives. Develops and writes procedures for installation, use and solving problems of communications hardware and software. Instructs users in use of equipment.

May oversee or assist in installation of communications hardware components. May oversee and participate in the design, creation and maintenance of Internet products and systems.

Minimum Education: Associate’s Degree in a relevant discipline. With at least twelve years of general experience of which ten years is directly related experience, a degree is not required.

IT-006 Commercial Job Title: Project/Task Order Manager

Minimum/General Experience: Eight years direct experience in the last ten years.

Functional Responsibility: Accountable for all aspects of project or task order performance. Provides overall direction to all project level activity and personnel interfaces with client personnel. Ensures schedules are met. Monitors performance indicators such as cost, timing and manpower loading. Keeps management informed of project status and deviations. Demonstrates strong oral and written communication skills.

Typically reports to the Program Manager or other senior management.

Minimum Education: Bachelor’s Degree in a relevant discipline. With at least 15 years of general experience of which 12 years is directly related experience, a degree is not required.

IT-007 Commercial Job Title: System Security Engineer

Minimum/General Experience: Five years direct experience, in the last seven years.

Functional Responsibility: Advises customer and/or performs tasks to ensure cost-effective system design and development, with integrated/embedded security features that are compliant with required certification/accreditation standards. May be required to evaluate, develop, recommend, test, modify, and change software/hardware configurations in order to meet government service level computer security requirements. May supervise more junior System Security Engineers.

Minimum Education: Bachelor’s Degree and formal AIS security training. With at least ten years of general experience of which eight years is directly related experience, a degree is not required.

IT-008 Commercial Job Title: Network Engineer

Minimum/General Experience: Five years direct experience in the last eight years.

Functional Responsibility: Performs a variety of network engineering tasks, either independently or under supervision, which are broad in nature and are concerned with the design and implementation of integrated networks, including personnel, hardware, software and support facilities and/or equipment. Supervises team of Network Engineers through project completion. Plans and performs network engineering research, design development, and other assignments in conformance with network design, engineering and customer specifications. Supervises Network Engineers through project completion. Responsible for major technical/engineering projects of higher complexity and importance than those normally assigned to lower level engineers. Performs with great latitude for unreviewed actions and decisions. Coordinates the activities of Network Engineers and Network Technicians assigned to specific network engineering projects. May perform other duties as assigned.

Minimum Education: Bachelor’s Degree in a relevant discipline. With at least ten years of general

IT-009 Commercial Job Title: Computer Programmer

Minimum/General Experience: Three years direct experience in the last five years.

Functional Responsibility: Analyzes business applications and design specifications. Develops block diagrams and logic flow charts. Translates detailed design into computer software. Tests, debugs and refines the computer software to produce the required product. Resolves a variety of nonstandard operating problems. Prepares required documentation including program-level and system-level documentation.

Prepares instructions for computer operators. Enhances software to reduce operating time or improve efficiency. Provides software conversion and implementation support to include continuing Y2K support.

May provide technical direction to more junior programmers.

Minimum Education: Bachelor’s Degree in a relevant discipline. With at least eight years of general experience of which six years is directly related experience, a degree is…