MAS - Data-Pages, Inc. - GS35F0010S

GENERAL SERVICES ADMINISTRATION

FEDERAL SUPPLY SERVICE

AUTHORIZED FEDERAL SUPPLY SCHEDULE CATALOG/PRICE LIST

On-line access to contract ordering information, terms and conditions, up-to-date pricing, and the option to create an electronic delivery order is available through GSA Advantage!, a menu-driven database system. The

INTERNET address for GSA Advantage! is http://www.gsaadvantage.gov

SCHEDULE TITLE: Multiple Award Schedule

FSC Classes/Product Codes:

Special Item No. 33411 Purchasing of new electronic equipment

Special Item No. 811212 Maintenance of Equipment, Repair Services and/or Repair/Spare Parts

Special Item No. 511210 Software Licenses

CONTRACT NUMBER:

GS-35F-0010S

CONTRACT PERIOD:

October 6, 2005-October 5, 2025

For more information on ordering from Federal Supply Schedules click on the FSS Schedules button at:

http://fss.gsa.gov/.

CONTRACTOR:

Data-Pages, inc.

159 East Main St.

Rockaway, NJ 07866

Telephone: 973-989-0400; Fax: 973-989-8830

Email: gsasales@data-pages.com

Internet: www.data-pages.com

CONTRACTOR’S ADMINISTRATION SOURCE:

Robin Moore (GSA Administratror)

159 East Main St.

Rockaway, NJ 07866

Tel: 800-669-4966

Fax: 973-989-8830 www.datapages.com

BUSINESS SIZE:

Woman Owned Small Business http://www.gsaadvantage.gov/ http://fss.gsa.gov/

CUSTOMER INFORMATION:

1a. TABLE OF AWARDED SPECIAL ITEM NUMBERS (SINs)/NAICS

33411 - Purchasing of New Electronic Equipment Includes desktop, laptop, tablet computers (including rugged), servers, storage equipment, hyperconverged integrated systems, supercomputers, routers, switches and other communications equipment, IT security equipment (hardware based firewalls), audio and video (AV) equipment, public address systems, monitors/displays, sensors and other Internet of Things (IOT) devices, printers and Multi-Function Device (MFD) equipment, broadcast band radio, two-way radio (LMR), microwave radio equipment, satellite communications equipment, radio transmitters/receivers (airborne), radio navigation equipment/antennas, optical/imaging systems, and associated peripherals required for operations (such as controllers, connectors, cables, drivers, adapters, etc., ancillary installation of any equipment purchased. NOTE:

Subject to Cooperative Purchasing

511210 - Software Licenses Includes both term and perpetual software licenses and maintenance. NOTE:

Subject to Cooperative Purchasing

811212 - Maintenance of Equipment, Repair Services and/or Repair/Spare Parts Maintenance, Repair Service, and Repair Parts/Spare Parts for Government-Owned General Purpose Commercial Information Technology

Equipment, Radio/Telephone Equipment NOTE: Subject to Cooperative Purchasing

OLM - Order-Level Materials (OLM) OLMs are supplies and/or services acquired in direct support of an individual task or delivery order placed against a Federal Supply Schedule (FSS) program contract or BPA.

OLM pricing is not established at the FSS contract, but at the order level. Since OLMs are identified and acquired at the order or BPA level, the ordering contracting officer (OCO) is responsible for making a fair and reasonable price determination for all OLMs using FAR 15.404 techniques for commercial price determinations.

Using this procedure, ancillary supplies and services that are unknown at the time of the Schedule contract award may be included and priced at the order level or BPA level. OLMs are not items awarded under ancillary supplies/services or other direct cost (ODC) SINs (these items are defined, priced, and awarded at the FSS contract level). NOTE: When used in conjunction with a Cooperative Purchasing eligible SIN, this SIN is

Cooperative Purchasing Eligible.

1b. LOWEST PRICED MODEL NUMBER AND PRICE FOR EACH SIN:

(Government net price based on a unit of one)

GSA Pricelist is on page 15

1c. HOURLY RATES (Services only):

GSA Pricelist is on page 15

2. MAXIMUM ORDER*: The Maximum Order value for the following Special Item Numbers (SINs) is $500,000:

Special Item Number 33411 - Purchasing of new electronic equipment Page 4 Special Item Number 811212 – Maintenance of Equipment, Repair Services and/or Repair/Spare Parts Special Item Number 511210- Software Licenses

NOTE TO ORDERING ACTIVITIES: *If the best value selection places your order over the Maximum Order identified in this catalog/pricelist, you have an opportunity to obtain a better schedule contract price. Before placing your order, contact the aforementioned contactor for a better price. The contractor may (1) offer a new price for this requirement (2) offer the lowest price available under this contract or (3) decline the order. A delivery order that exceeds the maximum order may be placed under the schedule contract in accordance with FAR 8.404.

3. MINIMUM ORDER: $300 for Sin 33411, Sin 811212 and Sin 511210

4. GEOGRAPHIC COVERAGE: Domestic - The 48 contiguous States and the District of Columbia only, and to a CONUS port or consolidation point for orders received from overseas activities.

5. POINT(S) OF PRODUCTION: -for products only- APC-USA, Archtech-USA, Cables to Go (CTG)-USA, Digi-Rep of Korea, US and Singapore, Fellowes-USA, Taiwan, Germany, Rep of Korea, GN Netcom-USA, Great Lakes-

USA, Gruber Ind-USA, IBM/Imation-USA, Mexico, Taiwan, Rep of Korea, Japan, InformaticsWasp-USA and Taiwan, Innovation First-USA, Liebert-Germany, Hungary, Mexico, Taiwan, USA, Remee Products-USA, Rose Electronics-USA, Sony-USA and Japan, Sumitomo-USA and Japan, Transition Networks-USA, Taiwan, Tripplite-USAand Taiwan, Turn-

Key-USA, Great Britain, Taiwan, Verbatim-Japan, USA, Mexico and Rep of Korea, and Viewsonic-USA, Japan, Taiwan and Germany

6. DISCOUNT FROM LIST PRICES: GSA Net Prices are shown on the attached GSA Pricelist. Negotiated discount has been applied and the IFF has been added.

7. QUANTITY DISCOUNT(S): $25,000 per line item.

8. PROMPT PAYMENT TERMS: Net 30 days

9. FOREIGN ITEMS: Any overseas production points are within the scope of the TAA.

10a. TIME OF DELIVERY: As negotiated with agency, up to 20 days

10b. EXPEDITED DELIVERY: Items available for expedited delivery are noted in this price list.

10c. OVERNIGHT AND 2-DAY DELIVERY: Overnight and 2-day delivery are available. Contact the

Contractor for rates.

10d. URGENT REQUIRMENTS: Agencies can contact the Contractor’s representative to affect a faster delivery. Customers are encouraged to contact the contractor for the purpose of requesting accelerated delivery.

11. FOB POINT: Destination

12a. ORDERING ADDRESS: Data-Pages, inc. 159 East Main St. Rockaway, NJ 07866

The following telephone number can be used by ordering activities to obtain technical and/or ordering assistance: 973-989-0400, 800-669-4966.

12b. ORDERING PROCEDURES: Ordering activities shall use the ordering procedures described in

Federal Acquisition Regulation 8.405-3 when placing an order or establishing a BPA for supplies or services.

The ordering procedures, information on Blanket Purchase Agreements (BPA’s) and a sample BPA can be found at the GSA/FSS Schedule Homepage (fss.gsa.gov/schedules).

13. PAYMENT ADDRESS: Data-Pages, inc. 159 East Main St. Rockaway, NJ 07866

14. WARRANTY PROVISION: Standard Commercial Warranty.

15. EXPORT PACKING CHARGES: NA

16. TERMS AND CONDITIONS OF RENTAL, MAINTENANCE, AND REPAIR (IF

APPLICABLE):

NA

17. TERMS AND CONDITIONS OF INSTALLATION (IF APPLICABLE): NA

18a. TERMS AND CONDITIONS OF REPAIR PARTS INDICATING DATE OF PARTS PRICE

LISTS AND ANY DISCOUNTS FROM LIST PRICES (IF AVAILABLE): NA

18b. TERMS AND CONDITIONS FOR ANY OTHER SERVICES (IF APPLICABLE): NA

19. LIST OF SERVICE AND DISTRIBUTION POINTS (IF APPLICABLE): NA

20. LIST OF PARTICIPATING DEALERS (IF APPLICABLE): NA

21. PREVENTIVE MAINTENANCE (IF APPLICABLE): NA

22a. SPECIAL ATTRIBUTES SUCH AS ENVIRONMENTAL ATTRIBUTES (e.g. recycled content, energy efficiency, and/or reduced pollutants): NA

22b. Section 508 Compliance for Electronic and Information Technology (EIT): Section 508 compliance information on the supplies and services in this contract are available at the following website address (URL): [http://www.XXXXi.com/] The EIT standard can be found at: www.Section508.gov/.

23. SAM UEI: RMM1ZVBZ2KE3

24. NOTIFICATION REGARDING REGISTRATION IN SYSTEM FOR AWARD

MANAGEMENT (SAM) DATABASE: Contractor has an Active Registration in the SAM database.

http://www.section508.gov/

1. MATERIAL AND WORKMANSHIP

All equipment furnished hereunder must satisfactorily perform the function for which it is intended.

2. ORDER

Written orders, EDI orders (GSA Advantage! and FACNET), credit card orders, and orders placed under blanket purchase agreements (BPA) agreements shall be the basis for purchase in accordance with the provisions of this contract. If time of delivery extends beyond the expiration date of the contract, the

Contractor will be obligated to meet the delivery and installation date specified in the original order.

For credit card orders and BPAs, telephone orders are permissible.

3. TRANSPORTATION OF EQUIPMENT

FOB DESTINATION. Prices cover equipment delivery to destination, for any location within the geographic scope of this contract.

4. INSTALLATION AND TECHNICAL SERVICES

a. INSTALLATION. When the equipment provided under this contract is not normally self-installable, the

Contractor's technical personnel shall be available to the ordering activity, at the ordering activity's location, to install the equipment and to train ordering activity personnel in the use and maintenance of the equipment.

The charges, if any, for such services are listed below, or in the price schedule:

See price schedule

b. INSTALLATION, DEINSTALLATION, REINSTALLATION. The Davis-Bacon Act (40 U.S.C. 276a-

276a-7) provides that contracts in excess of $2,000 to which the United States or the District of Columbia is a party for construction, alteration, or repair (including painting and decorating) of public buildings or public works with the United States, shall contain a clause that no laborer or mechanic employed directly upon the site of the work shall received less than the prevailing wage rates as determined by the Secretary of Labor.

The requirements of the Davis-Bacon Act do not apply if the construction work is incidental to the furnishing of supplies, equipment, or services. For example, the requirements do not apply to simple installation or alteration of a public building or public work that is incidental to furnishing supplies or equipment under a supply contract. However, if the construction, alteration or repair is segregable and exceeds $2,000, then the requirements of the Davis-Bacon Act applies.

The ordering activity issuing the task order against this contract will be responsible for proper administration and enforcement of the Federal labor standards covered by the Davis-Bacon Act. The proper Davis-Bacon wage determination will be issued by the ordering activity at the time a request for quotations is made for applicable construction classified installation, deinstallation, and reinstallation services under SIN 33411.

c. OPERATING AND MAINTENANCE MANUALS. The Contractor shall furnish the ordering activity with one (1) copy of all operating and maintenance manuals which are normally provided with the equipment being purchased.

5. INSPECTION/ACCEPTANCE

The Contractor shall only tender for acceptance those items that conform to the requirements of this contract.

The ordering activity reserves the right to inspect or test any equipment that has been tendered for acceptance. The ordering activity may require repair or replacement of nonconforming equipment at no increase in contract price. The ordering activity must exercise its postacceptance rights (1) within a

TERMS AND CONDITIONS APPLICABLE TO PURCHASE OF

GENERAL PURPOSE COMMERCIAL INFORMATION TECHNOLOGY EQUIPMENT

(SPECIAL ITEM NUMBER 33411)

reasonable time after the defect was discovered or should have been discovered; and (2) before any substantial change occurs in the condition of the item, unless the change is due to the defect in the item.

6. WARRANTY

a. Unless specified otherwise in this contract, the Contractor’s standard commercial warranty as stated in the contract’s commercial pricelist will apply to this contract.

b. The Contractor warrants and implies that the items delivered hereunder are merchantable and fit for use for the particular purpose described in this contract.

c. Limitation of Liability. Except as otherwise provided by an express or implied warranty, the Contractor will not be liable to the ordering activity for consequential damages resulting from any defect or deficiencies in accepted items.

d. If inspection and repair of defective equipment under this warranty will be performed at the Contractor's plant, the address is as follows: Data-Pages, inc., 159 East Main Street, Rockaway, NJ 07866

7. PURCHASE PRICE FOR ORDERED EQUIPMENT

The purchase price that the ordering activity will be charged will be the ordering activity purchase price in effect at the time of order placement, or the ordering activity purchase price in effect on the installation date (or delivery date when installation is not applicable), whichever is less.

8. RESPONSIBILITIES OF THE CONTRACTOR

The Contractor shall comply with all laws, ordinances, and regulations (Federal, State, City or otherwise) covering work of this character, and shall include all costs, if any, of such compliance in the prices quoted in this offer.

9. TRADE-IN OF INFORMATION TECHNOLOGY EQUIPMENT

When an ordering activity determines that Information Technology equipment will be replaced, the ordering activity shall follow the contracting policies and procedures in the Federal Acquisition Regulation (FAR), the policies and procedures regarding disposition of information technology excess personal property in the

Federal Property Management Regulations (FPMR) (41 CFR 101-43.6), and the policies and procedures on exchange/sale contained in the FPMR (41 CFR part 101-46).

(SPECIAL ITEM NUMBER 811212)

1. SERVICE AREAS

a. The maintenance and repair service rates listed herein are applicable to any ordering activity location within a

100 mile radius of the Contractor's service points. If any additional charge is to apply because of the greater distance from the Contractor's service locations, the mileage rate or other distance factor shall be stated in paragraphs 8.d and 9.d of this Special Item Number 811212.

b. When repair services cannot be performed at the ordering activity installation site, the repair services will be performed at the Contractor's plant(s) listed below:

Data-Pages, 159 East Main St., Rockaway, NJ 07866, or manufacturer’s designated repair facility.

2. MAINTENANCE ORDER

a. Agencies may use written orders, EDI orders, credit card orders, or BPAs, for ordering maintenance under this contract. The Contractor shall confirm orders within fifteen (15) calendar days from the date of receipt, TERMS AND CONDITIONS APPLICABLE TO MAINTENANCE, REPAIR SERVICE AND REPAIR

PARTS/SPARE PARTS FOR GOVERNMENT- OWNED GENERAL PURPOSE COMMERCIAL

INFORMATION

TECHNOLOGY EQUIPMENT (AFTER EXPIRATION OF

GUARANTEE/WARRANTY PROVISIONS AND/ OR WHEN REQUIRED

SERVICE IS NOT COVERED BY GUARANTEE/WARRANTY

PROVISIONS) AND FOR LEASED EQUIPMENT

except that confirmation of orders shall be considered automatic for renewals for maintenance (Special Item

Number 811212). Automatic acceptance of order renewals for maintenance service shall apply for machines which may have been discontinued from use for temporary periods of time not longer than 120 calendar days.

If the order is not confirmed by the Contractor as prescribed by this paragraph, the order shall be considered to be confirmed by the Contractor.

b. The Contractor shall honor orders for maintenance for the duration of the contract period or a lessor period of time, for the equipment shown in the pricelist. Maintenance service shall commence on a mutually agreed upon date, which will be written into the maintenance order. Maintenance orders shall not be made effective before the expiration of any applicable maintenance and parts guarantee/warranty period associated with the purchase of equipment. Orders for maintenance service shall not extend beyond the end of the contract period.

c. Maintenance may be discontinued by the ordering activity on thirty (30) calendar days written notice, or shorter notice when agreed to by the Contractor; such notice to become effective thirty (30) calendar days from the date on the notification. However, the ordering activity may extend the original discontinuance date upon written notice to the Contractor, provided that such notice is furnished at least ten (10) calendar days prior to the original discontinuance date.

d. Annual Funding. When annually appropriated funds are cited on a maintenance order, the period of maintenance shall automatically expire on September 30th of the contract period, or at the end of the contract period, whichever occurs first. Renewal of a maintenance order citing the new appropriation shall be required, if maintenance is to continue during any remainder of the contract period.

e. Cross-year Funding Within Contract Period. Where an ordering activity's specific appropriation authority provides for funds in excess of a 12 month, fiscal year period, the ordering activity may place an order under this schedule contract for a period up to the expiration of the contract period, notwithstanding the intervening fiscal years.

f. Ordering activities should notify the Contractor in writing thirty (30) calendar days prior to the expiration of maintenance service, if maintenance is to be terminated at that time. Orders for continued maintenance will be required if maintenance is to be continued during the subsequent period.

3. REPAIR SERVICE AND REPAIR PARTS/SPARE PARTS ORDERS

a. Agencies may use written orders, EDI orders, credit card orders, blanket purchase agreements (BPAs), or small order procedures for ordering repair service and/or repair parts/spare parts under this contract. Orders for repair service shall not extend beyond the end of the contract period.

b. When repair service is ordered, only one chargeable repairman shall be dispatched to perform repair service, unless the ordering activity agrees, in advance, that additional repair personnel are required to effect repairs.

4. LOSS OR DAMAGE

When the Contractor removes equipment to his establishment for repairs, the Contractor shall be responsible for any damage or loss, from the time the equipment is removed from the ordering activity installation, until the equipment is returned to such installation.

5. SCOPE

a. The Contractor shall provide maintenance for all equipment listed herein, as requested by the ordering activity during the contract term. Repair service and repair parts/spare parts shall apply exclusively to the equipment types/models within the scope of this Information Technology Schedule.

b. Equipment placed under maintenance service shall be in good operating condition.

(1) In order to determine that the equipment is in good operating condition, the equipment shall be subject to inspection by the Contractor, without charge to the ordering activity.

(2) Costs of any repairs performed for the purpose of placing the equipment in good operating condition shall be borne by the Contractor, if the equipment was under the Contractor's guarantee/warranty or maintenance responsibility prior to the effective date of the maintenance order.

(3) If the equipment was not under the Contractor's responsibility, the costs necessary to place the equipment in proper operating condition are to be borne by the ordering activity, in accordance with the provisions of Special Item Number 811212 (or outside the scope of this contract).

6. RESPONSIBILITIES OF THE ORDERING ACTIVITY

a. Ordering activity personnel shall not perform maintenance or attempt repairs to equipment while such equipment is under the purview of a maintenance order, unless agreed to by the Contractor.

b. Subject to security regulations, the ordering activity shall permit access to the equipment which is to be maintained or repaired.

c. If the Ordering Activity desires a factory authorized/certified service personnel then this should be clearly stated in the task or delivery order.

7. RESPONSIBILITIES OF THE CONTRACTOR

a. For equipment not covered by a maintenance contract or warranty, the Contractor's repair service personnel shall complete repairs as soon as possible after notification by the ordering activity that service is required.

Within the service areas, this repair service should normally be done within 4 hours after notification.

b. If the Ordering Activity task or delivery order specifies a factory authorized/certified service personnel then the Contractor is obligated to provide such a factory authorized/certified service personnel for the equipment to be repaired or serviced, unless otherwise agreed to in advance between the Agency and the Contractor. or equipment not covered by a maintenance contract or warranty, the Contractor's repair service personnel shall complete repairs as soon as possible after notification by the ordering activity that service is required. Within the service areas, this repair service should normally be done within 4 hours after notification.

8. MAINTENANCE RATE PROVISIONS

a. The Contractor shall bear all costs of maintenance, including labor, parts, and such other expenses as are necessary to keep the equipment in good operating condition, provided that the required repairs are not occasioned by fault or negligence of the ordering activity.

b. REGULAR HOURS

The basic monthly rate for each make and model of equipment shall entitle the ordering activity to maintenance service during a mutually agreed upon nine (9) hour principal period of maintenance, Monday through Friday, exclusive of holidays observed at the ordering activity location.

c. AFTER HOURS

Should the ordering activity require that maintenance be performed outside of Regular Hours, charges for such maintenance, if any, will be specified in the pricelist. Periods of less than one hour will be prorated to the nearest quarter hour.

d. TRAVEL AND TRANSPORTATION

If any charge is to apply, over and above the regular maintenance rates, because of the distance between the ordering activity location and the Contractor's service area, the charge will be:

NONE

e. QUANTITY DISCOUNTS

Quantity discounts from listed maintenance service rates for multiple equipment owned and/or leased by an ordering activity are indicated below: None.

9. REPAIR SERVICE RATE PROVISIONS

a. CHARGES. Charges for repair service will include the labor charge, computed at the rates set forth below, for the time during which repairmen are actually engaged in work, and, when applicable, the charge for travel or transportation.

b. MULTIPLE MACHINES. When repairs are ordered by a ordering activity on two or more machines located in one or more buildings within walking distance of each other, the charges will be computed from the time the repairman commences work on the first machine, until the work is completed on the last machine. The time required to go from one machine to another, or from one building to another, will be considered actual work performance, and chargeable to the ordering activity, provided the time consumed in going between machines (or buildings) is reasonable.

c. TRAVEL OR TRANSPORTATION

(1) AT THE CONTRACTOR'S SHOP

(a) When equipment is returned to the Contractor's shop for adjustments or repairs which are not covered by the guarantee/warranty provision, the cost of transportation, packing, etc., from the ordering activity location to the Contractor's plant, and return to the ordering activity location, shall be borne by the ordering activity.

(b) The ordering activity should not return defective equipment to the Contractor for adjustments and repairs or replacement without his prior consultation and instruction.

(2) AT THE ORDERING ACTIVITY LOCATION (Within Established Service Areas)

When equipment is repaired at the ordering activity location, and repair service rates are established for service areas or zones, the listed rates are applicable to any ordering activity location within such service areas or zones. No extra charge, time, or expense will be allowed for travel or transportation of repairmen or machines to or from the ordering activity office; such overhead is included in the repair service rates listed.

(3) AT THE ORDERING ACTIVITY LOCATION (Outside Established Service Areas)

(a) If repairs are to be made at the ordering activity location, and the location is outside the service area as shown in paragraph 1.a, the repair service and mileage rates negotiated per subparagraphs 1.a and 8.d will apply.

(b) When the overall travel charge computed at the above mileage rate is unreasonable

(considering the time required for travel, actual and necessary transportation costs, and the allowable ordering activity per diem rate for each night the repairman is required to remain overnight at the ordering activity location), the ordering activity shall have the option of reimbursing the Contractor for actual costs, provided that the actual costs are reasonable and allowable. The Contractor shall furnish the ordering activity with a report of travel performed and related expenses incurred. The report shall include departure and arrival dates, times, and the applicable mode of travel.

d. LABOR RATES

(1) REGULAR HOURS

The Regular Hours repair service rates listed herein shall entitle the ordering activity to repair service during the period 8:00 a.m. to 5:00 p.m., Monday through Friday, exclusive of holidays observed at the ordering activity location. There shall be no additional charge for repair service which was requested during Regular

Hours, but performed outside the Regular Hours defined above, at the convenience of the Contractor.

(2) AFTER HOURS

When the ordering activity requires that repair service be performed outside the Regular Hours defined above, except Sundays and Holidays observed at the ordering activity location, the After Hours repair service rates listed herein shall apply. The Regular Hours rates defined above shall apply when repair service is requested during Regular Hours, but performed After Hours at the convenience of the Contractor.

(3) SUNDAYS AND HOLIDAYS

When the ordering activity requires that repair service be performed on Sundays and Holidays observed at the ordering activity location, the Sundays and Holidays repair service rates listed herein shall apply. When repair service is requested to be performed during Regular Hours and/or After Hours, but is performed at the convenience of the Contractor on Sundays or Holidays observed at the ordering activity location, the Regular

Hours and/or After Hours repair service rates, as applicable, shall apply.

REPAIR SERVICE RATES

REGULAR AFTER SUNDAYS AND

MINIMUM HOURS HOURS HOLIDAYS

LOCATION CHARGE* PER HOUR** PER HOUR** PER HOUR

CONTRACTOR'S SHOP $60.00

ORDERING ACTIVITY LOCATION

(WITHIN ESTABLISHED

SERVICE AREAS) $180.00

ORDERING ACTIVITY LOCATION

(OUTSIDE ESTABLISHED

$60.00 N/A N/A

$60.00 N/A N/A

SERVICE AREAS) N/A N/A N/A N/A

*MINIMUM CHARGES INCLUDE _1_ FULL HOUR ON THE JOB.

**FRACTIONAL HOURS, AT THE END OF THE JOB, WILL BE PRORATED TO THE NEAREST QUARTER

HOUR.

10. REPAIR PARTS/SPARE PARTS RATE PROVISIONS

All parts, furnished as spares or as repair parts in connection with the repair of equipment, unless otherwise indicated in this pricelist, shall be new, standard parts manufactured by the equipment manufacturer. All parts shall be furnished at prices indicated in the Contractor's commercial pricelist dated 05/1/2014, etc. , at a discount of 0% from such listed prices.

11. GUARANTEE/WARRANTY—REPAIR SERVICE AND REPAIR PARTS/SPARE PARTS

a. REPAIR SERVICE

All repair work will be guaranteed/warranted for a period of 30 days.

b. REPAIR PARTS/SPARE PARTS

All parts, furnished either as spares or repairs parts will be guaranteed/warranted for a period of 90 days.

12. INVOICES AND PAYMENTS

a. Maintenance Service

(1) Invoices for maintenance service shall be submitted by the Contractor on a quarterly or monthly basis, after the completion of such period. Maintenance charges must be paid in arrears (31 U.S.C.

3324). PROMPT PAYMENT DISCOUNT, IF APPLICABLE, SHALL BE SHOWN ON THE

INVOICE.

(2) Payment for maintenance service of less than one month's duration shall be prorated at 1/30th of the monthly rate for each calendar day.

b. Repair Service and Repair Parts/Spare Parts

Invoices for repair service and parts shall be submitted by the Contractor as soon as possible after completion of work. Payment under blanket purchase agreements will be made quarterly or monthly, except where cash payment procedures are used. Invoices shall be submitted separately to each ordering activity office ordering services under the contract. The cost of repair parts shall be shown as a separate item on the invoice, and shall be priced in accordance with paragraph #10, above. PROMPT PAYMENT DISCOUNT, IF APPLICABLE, SHALL BE SHOWN ON THE INVOICE.

1. INSPECTION/ACCEPTANCE

The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The ordering activity reserves the right to inspect or test any software that has been tendered for acceptance. The ordering activity may require repair or replacement of nonconforming software at no increase in contract price. The ordering activity must exercise its post acceptance rights (1) within a reasonable time after the defect was discovered or should have been discovered; and (2) before any substantial change occurs in the condition of the software, unless the change is due to the defect in the software.

2. ENTERPRISE USER LICENSE AGREEMENTS REQUIREMENTS (EULA)

The Contractor shall provide all Enterprise User License Agreements in an editable Microsoft Office (Word) format.

3. GUARANTEE/WARRANTY

a. Unless specified otherwise in this contract, the Contractor’s standard commercial guarantee/warranty as stated in the contract’s commercial pricelist will apply to this contract.

b. The Contractor warrants and implies that the items delivered hereunder are merchantable and fit for use for the particular purpose described in this contract.

c. Limitation of Liability. Except as otherwise provided by an express or implied warranty, the Contractor will not be liable to the ordering activity for consequential damages resulting from any defect or deficiencies in accepted items.

4. TECHNICAL SERVICES

The Contractor, without additional charge to the ordering activity, shall provide a hot line technical support number

973-989-0400 for the purpose of providing user assistance and guidance in the implementation of the software. The technical support number is available from 9:00 am Eastern Time to 5:00 pm Eastern Time

5. SOFTWARE MAINTENANCE

a. Software maintenance as it is defined:

XXX 1. Software Maintenance as a Product SIN 511210

Software maintenance as a product includes the publishing of bug/defect fixes via patches and updates/upgrades in function and technology to maintain the operability and usability of the software product. It may also include other no charge support that are included in the purchase price of the product in the commercial marketplace. No charge support includes items such as user blogs, discussion forums, on-line help libraries and FAQs (Frequently Asked Questions), hosted chat rooms, and limited telephone, email and/or web-based general technical support for user’s self diagnostics.

Software maintenance as a product does NOT include the creation, design, implementation, integration, etc. of a software package. These examples are considered software maintenance as a service.

Software Maintenance as a product is billed at the time of purchase.

2. Software Maintenance as a Service (SIN 511210)

TERMS AND CONDITIONS APPLICABLE TO

PERPETUAL SOFTWARE LICENSES (SPECIAL ITEM NUMBER 511210)

Software maintenance as a service creates, designs, implements, and/or integrates customized changes to software that solve one or more problems and is not included with the price of the software. Software maintenance as a service includes person-to-person communications regardless of the medium used to communicate: telephone support, on-line technical support, customized support, and/or technical expertise which are charged commercially. Software maintenance as a service is billed arrears in accordance with 31 U.S.C. 3324.

Software maintenance as a service is billed in arrears in accordance with 31 U.S.C. 3324.

b. Invoices for maintenance service shall be submitted by the Contractor on a quarterly or monthly basis, after the completion of such period. Maintenance charges must be paid in arrears (31 U.S.C. 3324). PROMPT

PAYMENT DISCOUNT, IF APPLICABLE, SHALL BE SHOWN ON THE INVOICE.

6. PERIODS OF TERM LICENSES (SIN 511210) AND MAINTENANCE (SIN 511210)

a. The Contractor shall honor orders for periods for the duration of the contract period or a lessor period of time.

b. Term licenses and/or maintenance may be discontinued by the ordering activity on thirty (30) calendar days written notice to the Contractor.

c. Annual Funding. When annually appropriated funds are cited on an order for term licenses and/or maintenance, the period of the term licenses and/or maintenance shall automatically expire on September 30 of the contract period, or at the end of the contract period, whichever occurs first. Renewal of the term licenses and/or maintenance orders citing the new appropriation shall be required, if the term licenses and/or maintenance is to be continued during any remainder of the contract period.

d. Cross-Year Funding Within Contract Period. Where an ordering activity’s specific appropriation authority provides for funds in excess of a 12 month (fiscal year) period, the ordering activity may place an order under this schedule contract for a period up to the expiration of the contract period, notwithstanding the intervening fiscal years.

e. Ordering activities should notify the Contractor in writing thirty (30) calendar days prior to the expiration of an order, if the term licenses and/or maintenance is to be terminated at that time. Orders for the continuation of term licenses and/or maintenance will be required if the term licenses and/or maintenance is to be continued during the subsequent period.

7. CONVERSION FROM TERM LICENSE TO PERPETUAL LICENSE

a. The ordering activity may convert term licenses to perpetual licenses for any or all software at any time following acceptance of software. At the request of the ordering activity the Contractor shall furnish, within ten (l0) calendar days, for each software product that is contemplated for conversion, the total amount of conversion credits which have accrued while the software was on a term license and the date of the last update or enhancement.

b. Conversion credits which are provided shall, within the limits specified, continue to accrue from one contract period to the next, provided the software remains on a term license within the ordering activity.

c. The term license for each software product shall be discontinued on the day immediately preceding the effective date of conversion from a term license to a perpetual license.

d. The price the ordering activity shall pay will be the perpetual license price that prevailed at the time such software was initially ordered under a term license, or the perpetual license price prevailing at the time of conversion from a term license to a perpetual license, whichever is the less, minus an amount equal to

% of all term license payments during the period that the software was under a term license within the ordering activity.

8. TERM LICENSE CESSATION

After a software product has been on a continuous term license for a period of * months, a fully paid-up, non-exclusive, perpetual license for the software product shall automatically accrue to the ordering activity. The period of continuous term license for automatic accrual of a fully paid-up perpetual license does not have to be achieved during a particular fiscal year; it is a written Contractor commitment which continues to be available for software that is initially ordered under this contract, until a fully paid-up perpetual license accrues to the ordering activity. However, should the term license of the software be discontinued before the specified period of the continuous term license has been satisfied, the perpetual license accrual shall be forfeited.

9. UTILIZATION LIMITATIONS - (SIN 511210)

a. Software acquisition is limited to commercial computer software defined in FAR Part 2.101.

b. When acquired by the ordering activity, commercial computer software and related documentation so legend shall be subject to the following:

(1) Title to and ownership of the software and documentation shall remain with the Contractor, unless otherwise specified.

(2) Software licenses are by site and by ordering activity. An ordering activity is defined as a cabinet level or independent ordering activity. The software may be used by any subdivision of the ordering activity (service, bureau, division, command, etc.) that has access to the site the software is placed at, even if the subdivision did not participate in the acquisition of the software. Further, the software may be used on a sharing basis where multiple agencies have joint projects that can be satisfied by the use of the software placed at one ordering activity's site. This would allow other agencies access to one ordering activity's database. For ordering activity public domain databases, user agencies and third parties may use the computer program to enter, retrieve, analyze and present data. The user ordering activity will take appropriate action by instruction, agreement, or otherwise, to protect the

Contractor's proprietary property with any third parties that are permitted access to the computer programs and documentation in connection with the user ordering activity's permitted use of the computer programs and documentation. For purposes of this section, all such permitted third parties shall be deemed agents of the user ordering activity.

(3) Except as is provided in paragraph 8.b(2) above, the ordering activity shall not provide or otherwise make available the software or documentation, or any portion thereof, in any form, to any third party without the prior written approval of the Contractor. Third parties do not include prime Contractors, subcontractors and agents of the ordering activity who have the ordering activity's permission to use the licensed software and documentation at the facility, and who have agreed to use the licensed software and documentation only in accordance with these restrictions. This provision does not limit the right of the ordering activity to use software, documentation, or information therein, which the ordering activity may already have or obtains without restrictions.

(4) The ordering activity shall have the right to use the computer software and documentation with the computer for which it is acquired at any other facility to which that computer may be transferred, or in cases of Disaster Recovery, the ordering activity has the right to transfer the software to another site if the ordering activity site for which it is acquired is deemed to be unsafe for ordering activity personnel; to use the computer software and documentation with a backup computer when the primary computer is inoperative; to copy computer programs for safekeeping (archives) or backup purposes; to transfer a copy of the software to another site for purposes of benchmarking new hardware and/or software; and to modify the software and documentation or combine it with other software, provided that the unmodified portions shall remain subject to these restrictions.

(5) "Commercial Computer Software" may be marked with the Contractor's standard commercial restricted rights legend, but the schedule contract and schedule pricelist, including this clause, "Utilization Limitations" are the only governing terms and conditions, and shall take precedence and supersede any different or additional terms and conditions included in the standard commercial legend.

10. SOFTWARE CONVERSIONS - (SIN 511210)

Full monetary credit will be allowed to the ordering activity when conversion from one version of the software to another is made as the result of a change in operating system, or from one computer system to another. Under a perpetual license (511210), the purchase price of the new software shall be reduced by the amount that was paid to purchase the earlier version. Under a term license (511210), conversion credits which accrued while the earlier version was under a term license shall carry forward and remain available as conversion credits which may be applied towards the perpetual license price of the new version.

11. DESCRIPTIONS AND EQUIPMENT COMPATIBILITY

The Contractor shall include, in the schedule pricelist, a complete description of each software product and a list of equipment on which the software can be used. Also, included shall be a brief, introductory explanation of the modules and documentation which are offered.

12. RIGHT-TO-COPY PRICING

The Contractor shall insert the discounted pricing for right-to-copy licenses.