MAS - Nika Technologies Inc. - GS23F0010R

GENERAL SERVICES ADMINISTRATION

Federal Supply Service Authorized Federal Supply Schedule Price List

On-line access to contract ordering information, terms and conditions, up-to-date pricing, and the option to create an electronic delivery order is available through GSA Advantage!™, a menu-driven database system. The INTERNET address for GSA Advantage!™ is: http://www.GSAAdvantage.gov.

Schedule for Multiple Award Schedule Federal Supply Group: Engineering Services Class: R425

Contract Number: GS-23F-0010R

Contract Option Period 3: 10/14/2019 to 10/13/2024

Effective as of the acceptance of Mass Modification A821

Contractor: NIKA Technologies, Inc.; dba NIKA Architects & Engineers; DBQA NIKA 2000 Tower Oaks Boulevard, 6th Floor

Rockville, MD 20852

Business Size: Minority-Owned Small Business

Telephone: (301) 770-3520 FAX Number: (301) 770-3521 Web Site: www.nikasolutions.com E-mail: rcruz@nikasolujtions.com Contract Administration: Rosanna Cruz

For more information on ordering from Federal Supply Schedules click on the FSS Schedules button at http://www.gsa.gov/schedules-ordering

CUSTOMER INFORMATION:

1a. Table of Awarded Special Item Number(s) with appropriate cross-reference to page numbers:

SIN SIN Description

541330ENG/

541330ENGRC Engineering Services

561210FAC/

561210FACRC Facilities Maintenance and Repair

OLM/ OLMRC Order Level Material OLMSTLOC Order Level Material

1b. Identification of the lowest priced model number and lowest unit price for that model for each special item number awarded in the contract. This price is the Government price based on a unit of one, exclusive of any quantity/dollar volume, prompt payment, or any other concession affecting price.

Those contracts that have unit prices based on the geographic location of the customer, should show the range of the lowest price, and cite the areas to which the prices apply. See below.

1c. If the Contractor is proposing hourly rates a description of all corresponding commercial job titles, experience, functional responsibility and education for those types of employees or subcontractors who will perform services shall be provided. If hourly rates are not applicable, indicate “Not applicable” for this item. See below.

2. Maximum Order: Refer to 52.216-19 within the Sol.

3. Minimum Order: Refer to 52.216-19 within the Sol.

4. Geographic Coverage (delivery Area): Domestic (please check FSS online or D2)

5. Point(s) of production (city, county, and state or foreign country): Same as company address

6. Discount from list prices or statement of net price: Government net prices (discounts already deducted).

7. Quantity discounts: 1% for task orders that exceed $750,000

8. Prompt payment terms: Net 30 days

Information for Ordering Offices: Prompt payment terms cannot be negotiated out of the contractual agreement in exchange for other concessions.

9a. Notification that Government purchase cards are accepted up to the micro-purchase threshold: Yes

9b. Notification whether Government purchase cards are accepted or not accepted above the micro-purchase threshold: Yes

10. Foreign items (list items by country of origin): None

11a. Time of Delivery (Contractor insert number of days): Specified on the Task Order

11b. Expedited Delivery. The Contractor will insert the sentence “Items available for expedited delivery are noted in this price list.” under this heading. The Contractor may use a symbol of its choosing to highlight items in its price list that have expedited delivery: Contact Contractor

11c. Overnight and 2-day delivery. The Contractor will indicate whether overnight and 2-day delivery are available. Also, the Contractor will indicate that the schedule customer may contact the Contractor for rates for overnight and 2-day delivery: Contact Contractor

11d. Urgent Requirements. The Contractor will note in its price list the “Urgent Requirements” clause of its contract and advise agencies that they can also contact the Contractor’s representative to effect a faster delivery: Contact Contractor

12. F.O.B Points(s): Destination

13a. Ordering Address(es): Same as Contractor

13b. Ordering procedures: For supplies and services, the ordering procedures, information on Blanket Purchase

Agreements (BPA’s) are found in Federal Acquisition Regulation (FAR) 8.405-3.

14. Payment address(es): Same as company address

15. Warranty provision.: Contractor’s standard comm]ercial warranty.

16. Export Packing Charges (if applicable): N/A

17. Terms and conditions of Government purchase card acceptance (any thresholds above the micro-purchase level): Contact Contractor

18. Terms and conditions of rental, maintenance, and repair (if applicable): N/A

19. Terms and conditions of installation (if applicable): N/A

20. Terms and conditions of repair parts indicating date of parts price lists and any discounts from list prices (if applicable): N/A

20a. Terms and conditions for any other services (if applicable): N/A

21. List of service and distribution points (if applicable): N/A

22. List of participating dealers (if applicable): N/A

23. Preventive maintenance (if applicable): N/A

24a. Special attributes such as environmental attributes (e.g., recycled content, energy efficiency, and/or reduced pollutants). N/A

24b. If applicable, indicate that Section 508 compliance information is available on Electronic and

Information Technology (EIT) supplies and services and show where full details can be found (e.g.

contactor’s website or other location.) The EIT standards can be found at: www.Section508.gov/.

25. Data Universal Numbering System (DUNS) number: 022016658

26. Notification regarding registration in System for Award Management (SAM) database: Registered

27. Final Pricing:

The rates shown below include the Industrial Funding Fee (IFF) of 0.75%.

SINs Labor Category GSA

PRICE +

IFF

Current Year 16

GSA

PRICE +

IFF

Year 17

GSA

PRICE +

IFF

Year 18

GSA

PRICE +

IFF

Year 19

GSA

PRICE +

IFF

Year 20

541330ENG/561210FAC Accounting Clerk I ** $47.93 $48.88 $49.86 $50.86 $51.88

541330ENG/561210FAC Accounting Clerk II ** $41.85 $42.68 $43.54 $44.41 $45.30

541330ENG/561210FAC Accounting Clerk III ** $57.90 $59.06 $60.24 $61.44 $62.67

541330ENG/561210FAC Admin Assistant $69.55 $70.94 $72.36 $73.81 $75.29

541330ENG/561210FAC Appliance Mechanic ** $67.16 $68.50 $69.87 $71.27 $72.69

541330ENG/561210FAC Architect $142.09 $144.93 $147.83 $150.78 $153.80

541330ENG/561210FAC Boiler Tender ** $81.58 $83.21 $84.88 $86.57 $88.31

541330ENG/561210FAC CAD Operator ** $77.45 $79.00 $80.58 $82.19 $83.83

541330ENG/561210FAC Carpenter, Maintenance ** $66.47 $67.80 $69.15 $70.53 $71.95

541330ENG/561210FAC Civil Engineer $144.95 $147.85 $150.80 $153.82 $156.90

541330ENG/561210FAC Civil Engineering Technician ** $71.66 $73.10 $74.56 $76.05 $77.57

541330ENG/561210FAC Computer Operator I ** $52.60 $53.65 $54.72 $55.82 $56.93

541330ENG/561210FAC Computer Operator II ** $58.37 $59.54 $60.73 $61.94 $63.18

541330ENG/561210FAC Computer Operator III ** $49.89 $50.89 $51.90 $52.94 $54.00

541330ENG/561210FAC Computer Operator IV ** $70.18 $71.58 $73.02 $74.48 $75.97

541330ENG/561210FAC Computer Operator V ** $76.77 $78.30 $79.87 $81.46 $83.09

541330ENG/561210FAC Construction Quality Manager $154.85 $157.94 $161.10 $164.33 $167.61

541330ENG/561210FAC Contract Executive $221.35 $225.77 $230.29 $234.90 $239.59

541330ENG/561210FAC Cost Estimator $142.09 $144.93 $147.83 $150.78 $153.80

541330ENG/561210FAC Data Entry Operator I ** $44.77 $45.66 $46.58 $47.51 $48.46

541330ENG/561210FAC Data Entry Operator II ** $48.01 $48.97 $49.95 $50.95 $51.97

541330ENG/561210FAC Drafter/CAD Operator III ** $71.53 $72.96 $74.42 $75.91 $77.43

541330ENG/561210FAC Drafter/CAD Operator IV ** $81.47 $83.09 $84.76 $86.45 $88.18

541330ENG/561210FAC Electrical Engineer $150.44 $153.45 $156.52 $159.65 $162.85

541330ENG/561210FAC Electrician - Foreman $107.93 $110.08 $112.29 $114.53 $116.82

541330ENG/561210FAC Electrician - Journeyman $98.33 $100.30 $102.31 $104.35 $106.44

541330ENG/561210FAC Electronics Technician Maintenance I ** $69.31 $70.70 $72.11 $73.55 $75.02

541330ENG/561210FAC Electronics Technician Maintenance II ** $73.37 $74.84 $76.33 $77.86 $79.42

541330ENG/561210FAC Electronics Technician Maintenance III ** $76.82 $78.36 $79.93 $81.53 $83.16

541330ENG/561210FAC Engineering Technician I ** $62.07 $63.31 $64.58 $65.87 $67.19

541330ENG/561210FAC Engineering Technician II ** $68.60 $69.97 $71.37 $72.80 $74.26

541330ENG/561210FAC Engineering Technician III ** $75.67 $77.19 $78.73 $80.31 $81.91

541330ENG/561210FAC Engineering Technician IV ** $91.62 $93.45 $95.32 $97.23 $99.17

541330ENG/561210FAC Engineering Technician V ** $108.56 $110.73 $112.95 $115.21 $117.51

541330ENG/561210FAC Engineering Technician VI ** $131.30 $133.92 $136.60 $139.33 $142.12

541330ENG/561210FAC Environmental Engineer $147.90 $150.86 $153.87 $156.95 $160.09

541330ENG/561210FAC Environmental Technician ** $68.92 $70.30 $71.70 $73.14 $74.60

541330ENG/561210FAC Facilities Maintenance Manager $133.10 $135.76 $138.47 $141.24 $144.07

541330ENG/561210FAC Facility Maintenance Technician 1 $39.86 $40.65 $41.47 $42.30 $43.14

541330ENG/561210FAC Facility Maintenance Technician 2 $45.76 $46.68 $47.61 $48.56 $49.54

541330ENG/561210FAC Facility Maintenance Technician 3 $52.55 $53.60 $54.67 $55.77 $56.88

541330ENG/561210FAC Facility Maintenance Technician 4 $60.37 $61.58 $62.81 $64.06 $65.35

541330ENG/561210FAC Facility Maintenance Technician 5 $69.37 $70.75 $72.17 $73.61 $75.08

541330ENG/561210FAC Facility Manager, Assistant $60.37 $61.58 $62.81 $64.06 $65.35

541330ENG/561210FAC Facility Security Lead $52.55 $53.60 $54.67 $55.77 $56.88

541330ENG/561210FAC Facility Security Manager 1 $79.65 $81.24 $82.86 $84.52 $86.21

541330ENG/561210FAC Facility Security Manager 2 $91.52 $93.35 $95.21 $97.12 $99.06

541330ENG/561210FAC Fire Alarm System Mechanic ** $69.60 $70.99 $72.41 $73.86 $75.33

541330ENG/561210FAC Fire Protection Engineer $147.90 $150.86 $153.87 $156.95 $160.09

541330ENG/561210FAC Foreman $97.20 $99.15 $101.13 $103.15 $105.21

541330ENG/561210FAC Forklift Operator ** $54.87 $55.96 $57.08 $58.22 $59.39

541330ENG/561210FAC Fuel Distribution System Mechanic ** $73.40 $74.86 $76.36 $77.89 $79.45

541330ENG/561210FAC Fuel Distribution System Operator ** $63.70 $64.97 $66.27 $67.60 $68.95

541330ENG/561210FAC Gardener ** $53.31 $54.38 $55.47 $56.58 $57.71

541330ENG/561210FAC General Clerk I ** $47.72 $48.68 $49.65 $50.65 $51.66

541330ENG/561210FAC General Clerk II ** $52.23 $53.28 $54.34 $55.43 $56.54

541330ENG/561210FAC General Clerk III ** $61.89 $63.13 $64.39 $65.68 $66.99

541330ENG/561210FAC General Maintenance Worker ** $62.66 $63.91 $65.19 $66.49 $67.82

541330ENG/561210FAC Guard I ** $41.49 $42.32 $43.17 $44.03 $44.91

541330ENG/561210FAC Guard II ** $56.07 $57.19 $58.34 $59.50 $60.69

541330ENG/561210FAC Heavy Equipment Mechanic ** $69.60 $70.99 $72.41 $73.86 $75.33

541330ENG/561210FAC Heavy Equipment Operator ** $69.60 $70.99 $72.41 $73.86 $75.33

541330ENG/561210FAC Housekeeping Aide ** $39.72 $40.52 $41.33 $42.15 $43.00

541330ENG/561210FAC HVAC Mechanic ** $93.33 $95.20 $97.11 $99.05 $101.03

541330ENG/561210FAC HVAC Technician - Senior $68.92 $70.30 $71.70 $73.14 $74.60

541330ENG/561210FAC Information Mng Specialist ** $53.89 $54.96 $56.06 $57.19 $58.33

541330ENG/561210FAC Instrument Mechanic ** $69.60 $70.99 $72.41 $73.86 $75.33

541330ENG/561210FAC Inventory Clerk $30.20 $30.80 $31.42 $32.05 $32.69

541330ENG/561210FAC Laboratory Technician ** $66.66 $67.99 $69.35 $70.74 $72.15

541330ENG/561210FAC Laborer ** $47.70 $48.65 $49.62 $50.62 $51.63

541330ENG/561210FAC LAN Administrator 1 $52.55 $53.60 $54.67 $55.77 $56.88

541330ENG/561210FAC LAN Administrator 2 $69.37 $70.75 $72.17 $73.61 $75.08

541330ENG/561210FAC Locksmith ** $63.12 $64.38 $65.67 $66.98 $68.32

541330ENG/561210FAC Logistics Manager $91.52 $93.35 $95.21 $97.12 $99.06

541330ENG/561210FAC Logistics Specialist 1 $26.31 $26.84 $27.38 $27.92 $28.48

541330ENG/561210FAC Logistics Specialist 2 $34.72 $35.41 $36.12 $36.84 $37.58

541330ENG/561210FAC Logistics Specialist 3 $45.76 $46.68 $47.61 $48.56 $49.54

541330ENG/561210FAC Logistics Specialist 4 $60.37 $61.58 $62.81 $64.06 $65.35

541330ENG/561210FAC Logistics Specialist 5 $69.37 $70.75 $72.17 $73.61 $75.08

541330ENG/561210FAC Logistics Supervisor $79.65 $81.24 $82.86 $84.52 $86.21

541330ENG/561210FAC Machinery Maintenance Mechanic ** $90.09 $91.89 $93.73 $95.60 $97.52

541330ENG/561210FAC Maintenance Foreman $60.37 $61.58 $62.81 $64.06 $65.35

541330ENG/561210FAC Maintenance Technician $39.86 $40.65 $41.47 $42.30 $43.14

541330ENG/561210FAC Maintenance Trades Helper ** $51.65 $52.68 $53.74 $54.81 $55.91

541330ENG/561210FAC Manager $138.69 $141.46 $144.29 $147.17 $150.12

541330ENG/561210FAC Material Coordinator ** $67.00 $68.34 $69.71 $71.10 $72.53

541330ENG/561210FAC Material Expediter ** $50.64 $51.66 $52.69 $53.74 $54.82

541330ENG/561210FAC Material Handling Laborer ** $44.71 $45.60 $46.52 $47.45 $48.40

541330ENG/561210FAC Mechanical Engineer $147.90 $150.86 $153.87 $156.95 $160.09

541330ENG/561210FAC Motor Vehicle Mechanic ** $66.81 $68.15 $69.51 $70.90 $72.32

541330ENG/561210FAC Office Administration Lead $52.55 $53.60 $54.67 $55.77 $56.88

541330ENG/561210FAC Office Manager $75.10 $76.61 $78.14 $79.70 $81.30

541330ENG/561210FAC Operating Engineer $69.37 $70.75 $72.17 $73.61 $75.08

541330ENG/561210FAC Order Clerk I ** $50.62 $51.63 $52.66 $53.71 $54.79

541330ENG/561210FAC Order Clerk II ** $54.98 $56.08 $57.20 $58.35 $59.51

541330ENG/561210FAC Order Filler ** $45.76 $46.68 $47.61 $48.56 $49.54

541330ENG/561210FAC Painter, Maintenance ** $66.47 $67.80 $69.15 $70.53 $71.95

541330ENG/561210FAC Personnel Assistant (Employment) I ** $52.60 $53.65 $54.72 $55.82 $56.93

541330ENG/561210FAC Personnel Assistant (Employment) II ** $58.37 $59.54 $60.73 $61.94 $63.18

541330ENG/561210FAC Personnel Assistant (Employment) III ** $67.83 $69.18 $70.57 $71.98 $73.42

541330ENG/561210FAC Pest Controller ** $47.77 $48.73 $49.70 $50.70 $51.71

541330ENG/561210FAC Pipefitter, Maintenance ** $80.81 $82.42 $84.07 $85.75 $87.47

541330ENG/561210FAC Plumber, Maintenance ** $68.27 $69.63 $71.02 $72.44 $73.89

541330ENG/561210FAC Principal (Engineering) - $124.16 $126.65 $129.18 $131.76 $134.40

541330ENG/561210FAC Production Control Clerk ** $67.65 $69.01 $70.39 $71.79 $73.23

541330ENG/561210FAC Program Manager $185.89 $189.61 $193.40 $197.27 $201.22

541330ENG/561210FAC Project Manager $177.64 $181.19 $184.82 $188.51 $192.28

541330ENG/561210FAC Property Clerk $34.72 $35.41 $36.12 $36.84 $37.58

541330ENG/561210FAC Property Control Specialist 1 $45.76 $46.68 $47.61 $48.56 $49.54

541330ENG/561210FAC Property Control Specialist 2 $52.55 $53.60 $54.67 $55.77 $56.88

541330ENG/561210FAC Property Disposal Specialist 2 $60.37 $61.58 $62.81 $64.06 $65.35

541330ENG/561210FAC Property Support Assistant $39.86 $40.65 $41.47 $42.30 $43.14

541330ENG/561210FAC Purchasing Agent 1 $45.76 $46.68 $47.61 $48.56 $49.54

541330ENG/561210FAC Purchasing Agent 2 $60.37 $61.58 $62.81 $64.06 $65.35

541330ENG/561210FAC Purchasing Agent 3 $69.37 $70.75 $72.17 $73.61 $75.08

541330ENG/561210FAC Purchasing Manager $69.37 $70.75 $72.17 $73.61 $75.08

541330ENG/561210FAC Quality Assurance Assistant $34.72 $35.41 $36.12 $36.84 $37.58

541330ENG/561210FAC Quality Assurance Inspector $123.89 $126.37 $128.89 $131.47 $134.10

541330ENG/561210FAC Quality Assurance Manager $126.99 $129.53 $132.12 $134.76 $137.45

541330ENG/561210FAC Quality Assurance Officer $60.37 $61.58 $62.81 $64.06 $65.35

541330ENG/561210FAC Quality Assurance Specialist $60.37 $61.58 $62.81 $64.06 $65.35

541330ENG/561210FAC Quality Assurance Technician 1 $60.37 $61.58 $62.81 $64.06 $65.35

541330ENG/561210FAC Quality Assurance Technician 2 $69.37 $70.75 $72.17 $73.61 $75.08

541330ENG/561210FAC Quality Control Auditor $45.76 $46.68 $47.61 $48.56 $49.54

541330ENG/561210FAC Quality Manager $91.52 $93.35 $95.21 $97.12 $99.06

541330ENG/561210FAC Quality Support Supervisor $79.65 $81.24 $82.86 $84.52 $86.21

541330ENG/561210FAC Quality/Safety Manager $84.49 $86.17 $87.90 $89.66 $91.45

541330ENG/561210FAC Recycling Laborer ** $52.69 $53.75 $54.82 $55.92 $57.04

541330ENG/561210FAC Recycling Specialist ** $57.06 $58.20 $59.36 $60.55 $61.76

541330ENG/561210FAC Refuse Collector ** $45.29 $46.20 $47.12 $48.07 $49.03

541330ENG/561210FAC Scheduler $123.89 $126.37 $128.89 $131.47 $134.10

541330ENG/561210FAC Scheduler, Maintenance ** $52.60 $53.65 $54.72 $55.82 $56.93

541330ENG/561210FAC Secretary I ** $54.48 $55.57 $56.68 $57.82 $58.97

541330ENG/561210FAC Secretary II ** $58.71 $59.89 $61.09 $62.31 $63.55

541330ENG/561210FAC Secretary III ** $67.83 $69.18 $70.57 $71.98 $73.42

541330ENG/561210FAC Security and Safety Officer $91.52 $93.35 $95.21 $97.12 $99.06

541330ENG/561210FAC Security Engineer $150.44 $153.45 $156.52 $159.65 $162.85

541330ENG/561210FAC Security Officer 1 $52.55 $53.60 $54.67 $55.77 $56.88

541330ENG/561210FAC Security Officer 2 $60.37 $61.58 $62.81 $64.06 $65.35

541330ENG/561210FAC Service Order Dispatcher ** $53.66 $54.73 $55.83 $56.94 $58.08

541330ENG/561210FAC Shipping/Receiving Clerk ** $49.82 $50.82 $51.83 $52.87 $53.93

541330ENG/561210FAC Site Superintendent $71.79 $73.22 $74.69 $76.18 $77.71

541330ENG/561210FAC Small Engine Mechanic ** $65.60 $66.91 $68.25 $69.61 $71.00

541330ENG/561210FAC Specification Writer $142.09 $144.93 $147.83 $150.78 $153.80

541330ENG/561210FAC Sr. Architect $159.80 $163.00 $166.26 $169.58 $172.98

541330ENG/561210FAC Sr. CAD Operator ** $94.70 $96.59 $98.52 $100.50 $102.51

541330ENG/561210FAC Sr. Civil Engineer $167.52 $170.87 $174.28 $177.77 $181.33

541330ENG/561210FAC Sr. Construction Engineer $139.40 $142.18 $145.03 $147.93 $150.89

541330ENG/561210FAC Sr. Cost Estimator $154.49 $157.58 $160.73 $163.94 $167.22

541330ENG/561210FAC Sr. Electrical Engineer $176.99 $180.53 $184.14 $187.82 $191.58

541330ENG/561210FAC Sr. Environmental Engineer $166.49 $169.82 $173.22 $176.68 $180.22

541330ENG/561210FAC Sr. Fire Protection Engineer $176.99 $180.53 $184.14 $187.82 $191.58

541330ENG/561210FAC Sr. Mechanical Engineer $166.49 $169.82 $173.22 $176.68 $180.22

541330ENG/561210FAC Sr. Scheduler $139.40 $142.18 $145.03 $147.93 $150.89

541330ENG/561210FAC Sr. Security Engineer $176.99 $180.53 $184.14 $187.82 $191.58

541330ENG/561210FAC Sr. Structural Engineer $167.52 $170.87 $174.28 $177.77 $181.33

541330ENG/561210FAC Stationary Engineer ** $81.58 $83.21 $84.88 $86.57 $88.31

541330ENG/561210FAC Stock Clerk ** $40.92 $41.74 $42.57 $43.42 $44.29

541330ENG/561210FAC Structural Engineer $144.95 $147.85 $150.80 $153.82 $156.90

541330ENG/561210FAC Supply Clerk $34.72 $35.41 $36.12 $36.84 $37.58

541330ENG/561210FAC Supply Technician ** $69.58 $70.97 $72.39 $73.84 $75.31

541330ENG/561210FAC Telecommunications Mechanic I ** $77.98 $79.54 $81.13 $82.75 $84.41

541330ENG/561210FAC Telecommunications Mechanic II ** $81.69 $83.32 $84.99 $86.69 $88.42

541330ENG/561210FAC Tools And Parts Attendant ** $56.96 $58.10 $59.26 $60.45 $61.66

541330ENG/561210FAC Tractor Operator ** $49.06 $50.05 $51.05 $52.07 $53.11

541330ENG/561210FAC Transportation Clerk $52.55 $53.60 $54.67 $55.77 $56.88

541330ENG/561210FAC Truckdriver, Heavy ** $60.94 $62.16 $63.41 $64.67 $65.97

541330ENG/561210FAC Truckdriver, Light ** $48.20 $49.17 $50.15 $51.15 $52.18

541330ENG/561210FAC Truckdriver, Medium ** $57.24 $58.38 $59.55 $60.74 $61.96

541330ENG/561210FAC Truckdriver, Tractor-Trailer ** $60.94 $62.16 $63.41 $64.67 $65.97

541330ENG/561210FAC Utility Operator $52.55 $53.60 $54.67 $55.77 $56.88

541330ENG/561210FAC Vehicle Dispatcher $39.86 $40.65 $41.47 $42.30 $43.14

541330ENG/561210FAC Ventilation Equipment Tender ** $61.29 $62.51 $63.76 $65.04 $66.34

541330ENG/561210FAC Warehouse Lead $60.37 $61.58 $62.81 $64.06 $65.35

541330ENG/561210FAC Warehouse Specialist ** $45.76 $46.68 $47.61 $48.56 $49.54

541330ENG/561210FAC Warehouse Supervisor $69.37 $70.75 $72.17 $73.61 $75.08

541330ENG/561210FAC Warehouse Worker $39.86 $40.65 $41.47 $42.30 $43.14

541330ENG/561210FAC Warehousing Manager $69.37 $70.75 $72.17 $73.61 $75.08

541330ENG/561210FAC Warehousing Manager, Assistant $79.65 $81.24 $82.86 $84.52 $86.21

541330ENG/561210FAC Water Treatment Plant Operator ** $68.08 $69.45 $70.83 $72.25 $73.70

541330ENG/561210FAC Welder - Journeyman ** $92.93 $94.79 $96.68 $98.62 $100.59

541330ENG/561210FAC Window Cleaner ** $40.92 $41.74 $42.57 $43.42 $44.29

541330ENG/561210FAC Woodcraft Worker ** $69.60 $70.99 $72.41 $73.86 $75.33

541330ENG/561210FAC Woodworker ** $55.58 $56.70 $57.83 $58.99 $60.17

541330ENG/561210FAC Work Control Assistant $39.86 $40.65 $41.47 $42.30 $43.14

541330ENG/561210FAC Work Control Dispatcher $39.86 $40.65 $41.47 $42.30 $43.14

541330ENG/561210FAC Work Control Manager $94.42 $96.30 $98.23 $100.20 $102.20

541330ENG/561210FAC Work Order Clerk $34.72 $35.41 $36.12 $36.84 $37.58

541330ENG/561210FAC Technician I ** $69.68 $71.07 $72.49 $73.94 $75.42

541330ENG/561210FAC Technician II ** $78.82 $80.40 $82.00 $83.64 $85.32

541330ENG/561210FAC Clerk ** $52.52 $53.57 $54.65 $55.74 $56.85

LABOR CATEGORY DESCRIPTIONS

**Labor Categories that are subject to under Service Contract Labor Standard (SCLS)

Labor Category Minimum Education

Minimum Years of

Experience Description

Accounting Clerk I ** High School 1

Performing one or more routine accounting clerical operations such as: examining, verifying, and correcting various accounting documents to ensure completeness and accuracy of data in accordance to accounting procedures. Specific tasks/duties are assigned under adequate supervision. Entry-level reconciliation and posting will be assigned under detailed guidance. In most instances, an employee in this position will rely on the supervisors' instructions. Completed work will be reviewed for accuracy and compliance with procedure.

Accounting Clerk II ** High School 2

This position uses knowledge of double entry bookkeeping in performing one or more of the following: posting actions to journals, identifying subsidiary accounts affected, making debit and credit entries, and assigning proper codes. The Accounting Clerk II may review computer printouts against manually maintained journals, detect and correct erroneous postings, and prepare documents to adjust accounting classifications and other data, or review lists of transactions rejected by an automated system. In this instance, the Accounting Clerk II will determine reasons for rejections, and prepare necessary correcting material. On routine assignments, an employee will select and apply established procedures and techniques. Detailed instructions are provided for difficult or unusual assignments. Completed work and methods used, are reviewed for technical accuracy.

Accounting Clerk III

Bachelors 3

The Accounting Clerk III maintains journals or subsidiary ledgers of an accounting system and balances and reconciles accounts. Typical duties include one or both of the following: 1) reviewing invoices and statements verifying information, ensuring sufficient funds have been obligated, and if questionable, resolving with the submitting unit determining accounts involved. The review will include coding transactions, and processing material through data processing for application in the accounting system; 2) analysis and reconciliation of computer printouts with operating unit reports (contacting units, researching causes of discrepancies, and taking action to ensure that accounts balance). Supervisor provides suggestions for handling unusual or non-recurring transactions. Conformance with requirements and technical soundness of completed work are reviewed by the supervisor or are controlled by mechanisms built into the accounting processes.

Admin Assistant Associates 4

In addition to secretarial duties (filing, taking phone calls, scheduling appointments, making travel arrangements), this position will provide administrative support to executive staff with office management responsibilities to include budgeting, personnel records and payroll. The Administrative Assistant may be required to work independently on projects requiring research and preparation of briefing charts and other presentation materials. Responsibilities for this position include using judgment to determine the most appropriate and expedient way to resolve a portfolio of delinquent accounts in order to maximize collection. The Collection Specialist requests and analyzes credit reports for use in determining ways to resolve delinquent accounts, determines whether write-off tools are necessary, and recommends them to immediate supervisor when debts are uncollectible, (i.e., in case of bankruptcy). This position monitors payments made by debtors and minimizes the number of delinquent accounts.

Appliance Mechanic

High School 1

The Appliance Mechanic installs, services and repairs stoves, refrigerators, dishwashing machines, and other electrical household or commercial appliances, using hand tools, test equipment and following wiring diagrams and manufacturer's specifications. This person connects appliance to power source and test meters, such as wattmeter, ammeter, or voltmeter, observes readings on meters and graphic recorders, examines appliance during operating cycle to detect excess vibration, overheating, fluid leaks and loose parts, and disassembles appliances and examines mechanical and electrical parts. The worker traces electrical circuits, following diagram and locates shorts and grounds, using ohmmeter, calibrates timers, thermostats and adjusts contact points, and cleans and washes parts, using wire brush, buffer, and solvent to remove carbon, grease and dust. This person replaces worn or defective parts, such as switches, pumps, bearings, transmissions, belts, gears, blowers and defective wiring, repairs and adjusts appliance motors, reassembles appliance, adjusts pulleys and lubricates moving parts, using hand tools and lubricating equipment.

Architect Masters 2

Responsible for minor or small architectural projects.

Selects, evaluates, and implements architectural procedures and techniques used to complete projects.

Prepares reports and specifications as requested. May supervise and guide the work of lower-level architects.

Typically requires the use of more advanced techniques.

Requires a bachelor's degree of architecture. Typically reports to a supervisor or manager.

Boiler Tender ** High School 1

The Boiler Tender tends one or more boilers to produce steam or high-temperature water for use in an establishment, fires boiler, observes and interprets readings on gauges, meters, and charts which register various aspects of boiler operation, adjusts controls to insure safe and efficient boiler operation and to meet demands for steam or high-temperature water. This incumbent may also do one or more of the following:

maintain a log in which various aspects of boiler operation are recorded; clean, oil, make minor repairs or assist in repair to boiler room equipment; and following prescribed methods, treat boiler water with chemicals and analyze boiler water for such things as acidity, causticity, and alkalinity.

CAD Operator ** Associates 2

Supports facility department activities. Creates original AutoCAD drawings from sketches or red-lined architectural drawings. Creates electrical and architectural drawings.

Modifies existing AutoCAD drawings to reflect as- built red line changes.

Carpenter, Maintenance **

High School 1

The Carpenter, Maintenance performs the carpentry duties necessary to maintain in good repair building woodwork and equipment such as bins, cribs, counters, benches, partitions, doors. Work involves most of the following: planning and laying out of work from blueprints, drawings, models, or verbal instructions, using a variety of carpenter's hand tools, portable power tools and standard measuring instruments, and making standard shop computations relating to dimensions of work; and selecting materials necessary for the work. In general, the work of the maintenance carpenter requires rounded training and experience usually acquired through a formal apprenticeship or equivalent training and experience.

Civil Engineer Bachelors 2

This technician assists the Civil Engineer in application of principles, methods, and techniques of civil engineering technology, reviews project specifications and confers with the Civil Engineer concerning assistance required, such as plan preparation, acceptance testing, and evaluation of field conditions, design changes, and reports. This worker conducts materials testing and analysis, using tools and equipment and applying engineering knowledge necessary to conduct tests, prepares reports detailing tests conducted and their results. The Civil Engineering Technician surveys project sites to obtain and analyze topographical details of sites, using maps and surveying equipment, drafts detailed dimensional drawings such as those needed for highway plans, structural steel fabrication, and water control projects. This work involves performing duties as described under Drafter, and calculating dimensions, profile specifications, and quantities of materials such as steel, concrete, and asphalt, using calculator.

Civil Engineering Technician **

High School 1

This technician assists the Civil Engineer in application of principles, methods, and techniques of civil engineering technology, reviews project specifications and confers with the Civil Engineer concerning assistance required, such as plan preparation, acceptance testing, and evaluation of field conditions, design changes, and reports. This worker conducts materials testing and analysis, using tools and equipment and applying engineering knowledge necessary to conduct tests, prepares reports detailing tests conducted and their results. The Civil Engineering Technician surveys project sites to obtain and analyze topographical details of sites, using maps and surveying equipment, drafts detailed dimensional drawings such as those needed for highway plans, structural steel fabrication, and water control projects. This work involves performing duties as described under Drafter, and calculating dimensions, profile specifications, and quantities of materials such as steel, concrete, and asphalt, using calculator.

Computer Operator I

High School 1

The Computer Operator monitors and operates the control console of either a mainframe digital computer or a group of minicomputers, in accordance with operating instructions, to process data. Work is characterized by the following: Studies operating instructions to determine equipment setup needed. Loads equipment with required items (tapes, cards, paper, etc.). Switches necessary auxiliary equipment into system; Diagnoses and corrects equipment malfunctions; Reviews error messages and makes corrections during operation or refers problems;

Maintains operating record. This operator may test run new or modified programs and assists in modifying systems or programs. Included within the scope of this definition are fully qualified Computer Operators, trainees working to become fully qualified operators, and lead operators providing technical assistance to lower level positions. The Computer Operator I works under close personal supervision and is provided detailed written or oral guidance before and during assignments.

As instructed, this worker resolves common operating problems and may serve as an assistant operator working under close supervision or performing a portion of a more senior operator's work.

Computer Operator II

High School 2

The Computer Operator monitors and operates the control console of either a mainframe digital computer or a group of minicomputers, in accordance with operating instructions, to process data. Work is characterized by the following: Studies operating instructions to determine equipment setup needed. Loads equipment with required items (tapes, cards, paper, etc.). Switches necessary auxiliary equipment into system; Diagnoses and corrects equipment malfunctions; Reviews error messages and makes corrections during operation or refers problems;

Maintains operating record. This operator may test run new or modified programs and assists in modifying systems or programs. Included within the scope of this definition are fully qualified Computer Operators, trainees working to become fully qualified operators, and lead operators providing technical assistance to lower level positions. The Computer Operator II processes scheduled routines that present few difficult operating problems (e.g., infrequent or easily resolved error conditions). In response to computer output instructions or error conditions, this worker applies standard operating or corrective procedure, refers problems that do not respond to preplanned procedure, and may serve as an assistant operator, working under general supervision.

Computer Operator

III **

High School 3

The Computer Operator III processes a range of scheduled routines. In addition to operating the system and resolving common error conditions, this worker diagnoses and acts on machine stoppage and error conditions not fully covered by existing procedures and guidelines (e.g., resetting switches and other controls or making mechanical adjustments to maintain or restore equipment operations). In response to computer output instructions or error conditions, the Computer Operator III may deviate from standard procedures if standard procedures do not provide a solution and refers problems which do not respond to corrective procedures to a person of supervisory or higher individual contributor level.

Computer Operator IV ** High School 5

The Computer Operator IV adapts to a variety of nonstandard problems that require extensive operator intervention (e.g., frequent introduction of new programs, applications, or procedures). In response to computer output instructions or error conditions, this worker chooses or devises a course of action from among several alternatives and alters or deviates from standard procedures if standard procedures do not provide a solution (e.g., reassigning equipment in order to work around faulty equipment or transfer channels); then refers problems if necessary. Typically, completed work is submitted to users without supervisory review.

Computer Operator V ** High School 7

The Computer Operator V resolves a variety of difficult operating problems (e.g. making unusual equipment connections and rarely used equipment and channel configurations to direct processing through or around problems in equipment, circuits, or channels or reviewing test run requirements and developing unusual system configurations that will allow test programs to process without interfering with ongoing job requirements). In response to computer output instructions and error conditions or to avoid loss of information or to conserve computer time, operator deviates from standard procedures. Such actions may materially alter the computer unit's production plans. This operator may spend considerable time away from the control station providing technical assistance to lower level operators and assisting programmers, systems analysts, and subject matter specialists with resolution of problems.

Construction Quality Manager

High School 7

Manage project quality requirements in construction.

Responsibilities include daily quality control reporting, subcontractor management, submittal management, conducting quality phase meetings and frequent field quality control inspections aimed at preventing contract non-conformance. Must be able to demonstrate and be champion of continuous process improvement throughout the project and company.

Contract Executive Bachelors 7

Ensuring that exposure to legal and technical risks is minimized. Clarification of tender and contract requirements with other processes or enterprises of the Company for negotiation scope and cost with required subcontractors, agents and partners. Preparation of proposal and contract specific documentation with the support of the relevant business, operational or supporting departments, subcontractors and partners. • Reviewing and suggesting legal terms & conditions together with the Enterprise Legal. • To ensure that all legal, as well as insurance requirements that could not be resolved during contract negotiations are known and addressed appropriately. • Request names for responsible of Project Manager for each awarded contract from the Project Management department

Cost Estimator High School 2

Estimates costs for engineering projects based on an analysis of project technical requirements. Collects and analyzes all project costs, including raw materials, labor, equipment and tooling to ensure estimates are accurate.

Identifies and quantifies potential cost uncertainties to ensure costing models capture the full range of potential costs. Updates costs as necessary based on new information and project scope changes. Requires interface with project management, engineering, and procurement departments.

Data Entry Operator I

High School 1

This position operates keyboard-controlled data entry devices such as a computer, key-operated magnetic tape, or disc encoder to transcribe data into a format suitable for computer processing. Job task requires skill in operating an alphanumeric keyboard, and an understanding of transcribing procedures and relevant data entry equipment. Positions are classified into levels based on the following definitions: This position works under close supervision and follows specific procedures or detailed instructions. The Data Entry Operator I works from various standardized source documents that have been coded and require little or no selecting, coding or interpreting of data. Problems such as erroneous items and codes, or missing information are resolved at the supervisory level. Work is routine and repetitive.

Data Entry Operator

II **

High School 3

This position requires the application of experience and judgment in selecting procedures to be followed, and searching for interpreting, selecting, or coding items to be entered from a variety of document sources. The Data Entry Operator II may occasionally perform routine work as described for Data Entry Operator I. Excluded are operators above Level II using the key entry controls to access, read, and evaluate the substance of specific records to take substantive actions, or to make entices requiring a similar level of knowledge.

Drafter/CAD Operator III **

High School 3

The Draft/CAD Operator performs drafting work manually or using a computer, requiring knowledge and skill in drafting methods, procedures, and techniques, prepares drawings of structures, facilities, land profiles, water systems, mechanical and electrical equipment, pipelines, duck systems, and similar equipment, systems, and assemblies. Drawings are used to communicate engineering ideas, design, and information. This operator uses recognized systems of symbols, legends, shadings, and lines having specific meanings in drawings. The Draft/CAD Operator III makes arithmetic computations using standard formulas. Familiar or recurring work is assigned in general terms. Unfamiliar assignments include information on methods, procedures, sources of information, and precedents to follow. Simple revisions to existing drawings or computer models may be assigned with a verbal explanation of the desired results. More complex revisions are produced from sketches, computer models or specifications that clearly depict the desired product.

Drafter/CAD Operator IV **

High School 5

This operator works closely with design originators preparing drawings or computer models of unusual, complex, or original designs that require a high degree of precision, performs unusually difficult assignments requiring considerable initiative, resourcefulness, and drafting expertise. This incumbent assures that anticipated problems in manufacture, assembly, installation, and operation are resolved by the drawing produced, exercises independent judgment in selecting and interpreting data based on knowledge of the design intent. Although working primarily as a drafter, this worker may occasionally interpret general designs prepared by others to complete minor details, may provide advice and guidance to lower level drafters or serve as coordinator and planner for large and complex drafting projects.

Electrical Engineer Bachelors 2

Designs, develops, and tests electrical equipment, components, or systems. Applies mathematical and engineering principles and methods to electrical system designs. Conducts research to produce design solutions, improvements, and new products. Demonstrates expertise in a variety of the field's concepts, practices, and procedures to junior engineer.

Electrician - Foreman High School 3

An Electrician performs a variety of electrical trade functions such as the installation, maintenance, or repair of equipment for the generation, distribution, or utilization of electric energy. Work involves most of the following:

installing or repairing any of a variety of electrical equipment such as generators, transformers, switchboards, controllers, circuit breakers, motors, heating units, conduit systems, or other transmission equipment;

working from blueprints, drawings, layouts, or other specifications, locating and diagnosing trouble in the electrical system or equipment, working standard computations relating to load requirements of wiring or electrical equipment, and using a variety of electrician's hand tools and measuring and testing instruments. In general, the work of the maintenance electrician requires rounded training and experience usually acquired through a formal apprenticeship or equivalent training and experience.

Electrician - Journeyman High School 7

Performs maintenance and service repairs on electrical systems. Installs new units or replacement parts for existing units according to specifications and established safety guidelines. Familiar with a variety of the field's concepts, practices, and procedures. Relies on experience and judgment to plan and accomplish goals. Performs a variety of complicated tasks. May lead and direct the work of others. Typically reports to a supervisor or manager. A wide degree of creativity and latitude is expected

Electronics Technician Maintenance I **

High School 1

The Electronics Technician, Maintenance maintains, repairs, troubleshoots, modifies and installs various types of electronic equipment and related devices such as electronic transmitting and receiving equipment (e.g., radar, radio, television, telecommunication, sonar, and navigational aids); personal and main frame computers and terminals, industrial, medical, measuring, and controlling equipment; and industrial robotic devices. The successful incumbent applies technical knowledge of electronics principles in determining equipment malfunctions, and applies skill in restoring equipment operation, evaluates performance and reliability of prototype or production mode, and recommends changes in circuitry or installation specifications to simplify assembly and maintenance. The Electronics Technician Maintenance I applies basic technical knowledge to perform simple or routine tasks following detailed instructions, performs such tasks as replacing components, wiring circuits, repairing simple electronic equipment; and taking test readings using common instruments such as digital multi-meters, signal generators, semiconductor testers, curve tracers, and oscilloscopes. This person works under close supervision receiving technical guidance from supervisor or higher-level technician. Work is checked frequently for accuracy.

Electronics Technician Maintenance II **

High School 3

The Electronics Technician, Maintenance maintains, repairs, troubleshoots, modifies and installs various types of electronic equipment and related devices such as electronic transmitting and receiving equipment (e.g., radar, radio, television, telecommunication, sonar, and navigational aids); personal and main frame computers and terminals, industrial, medical, measuring, and controlling equipment; and industrial robotic devices. The successful incumbent applies technical knowledge of electronics principles in determining equipment malfunctions, and applies skill in restoring equipment operation, evaluates performance and reliability of prototype or production mode, and recommends changes in circuitry or installation specifications to simplify assembly and maintenance. The Electronics Technician Maintenance II applies basic and some advanced technical knowledge to solve routine problems by interpreting manufacturers’ manuals or similar documents. Work requires familiarity with the interrelationships of circuits and judgment in planning work sequence, in selecting tools, testing instruments, and is reviewed for compliance with accepted practices.

This technician works under immediate supervision and achieves technical guidance, as required, from supervisor or higher-level technician.

Electronics Technician Maintenance III **

High School 5

The Electronics Technician, Maintenance maintains, repairs, troubleshoots, modifies and installs various types of electronic equipment and related devices such as electronic transmitting and receiving equipment (e.g., radar, radio, television, telecommunication, sonar, and navigational aids); personal and main frame computers and terminals, industrial, medical, measuring, and controlling equipment; and industrial robotic devices. The successful incumbent applies technical knowledge of electronics principles in determining equipment malfunctions, and applies skill in restoring equipment operation, evaluates performance and reliability of prototype or production mode, and recommends changes in circuitry or installation specifications to simplify assembly and maintenance. The Electronics Technician Maintenance III applies advanced technical knowledge to solve complex problems that typically cannot be solved solely by referencing manufacturers’ manuals or similar documents. Examples of such problems include determining the location and density of circuitry, evaluating electromagnetic radiation, isolating malfunctions, and incorporating engineering; changes.

Work typically requires an understanding of the interrelationships of circuits, exercising independent judgment in performing such tasks as making circuit analyses, calculating wave forms, and tracing relationships in signal flow, using complex test instruments such as high frequency pulse generators, frequency synthesizers, distortion analyzers, and complex computer control equipment. Work may be reviewed by supervisor for general compliance with accepted practices. This position may provide technical guidance to lower level technicians.

Engineering Technician I **

High School 1

This technician performs simple routine tasks under close supervision or from detailed procedures. Work is checked in progress or on completion. This person performs one or a combination of such typical duties as: 1. Assembling or installing equipment or parts requiring simple wiring, soldering, or connecting. 2. Performing simple or routine tasks or tests such as tensile or hardness tests; operating and adjusting simple test equipment; records test data. 3.

Gathering and maintaining specified records of engineering data such as tests, drawings, etc.; performing computations by substituting numbers in specified formulas; plotting data and draws simple curves and graphs.

Engineering Technician II **

High School 3

The Engineering Technician II performs standardized or prescribed assignments involving a sequence of related operations, follows standard work methods on recurring assignments but receives explicit instructions on unfamiliar assignments. Technical adequacy of routine work is reviewed on completion; non-routine work may be reviewed in progress. This technician performs at this level, one or a combination of such typical duties as: 1.

Following specific instructions, assembles or constructs simple or standard equipment or parts, servicing or repairing simple instruments or equipment; 2. Conducting a variety of tests using established methods, preparing test specimens, adjusting and operating equipment, recording test data, and pointing out deviations resulting from equipment malfunction or observational errors; 3.

Extracting engineering data from various prescribed but non-standardized sources, processing the data following well-defined methods including elementary algebra and geometry, and presenting the data in prescribed form.

Engineering Technician III **

High School 5

The Engineering Technician III performs assignments that are not completely standardized or prescribed, selects or adapts standard procedures or equipment, using fully applicable precedents, receives initial instructions, equipment requirements, and advice from supervisor or engineer as needed, performs recurring work independently. Work is reviewed for technical adequacy or conformity with instructions. This technician performs at this level one or a combination of such typical duties as: 1.

Constructing components, subunits, or simple models or adapts standard equipment; may troubleshoot and correct malfunctions; 2. Following specific layout and scientific diagrams to construct and package simple devices and subunits of equipment. 3. Conducting various tests or experiments which may require minor modifications in test setups or procedures as well as subjective judgments in measurement, selecting, preparing, and operating standard test equipment and records test data; 4.

Extracting and compiling a variety of engineering data from field notes, manuals, lab reports, etc., processing data, identifying errors or inconsistencies, selecting methods of data presentation. 5. Assisting in design modification by compiling data related to design, specifications, and materials that are pertinent to specific items of equipment or component parts; developing information concerning previous operational failures and modifications, and using judgment and initiative to recognize inconsistencies or gaps in data and seek sources to clarify information.

Engineering Technician IV **

High School 7

The Engineering Technician IV performs non-routine assignments of…