PES - Engility Services, LLC - GS23F0008K

General Services Administration

Federal Supply Service

Authorized Federal Supply Schedule Price List

On-line access to contract ordering information, terms and conditions, up-to-date pricing, and the option to create an electronic delivery order are available through GSA Advantage! ®, a menu-driven database system. The INTERNET address GSA Advantage! ® is: GSAAdvantage.gov.

Professional Engineering Services

Standard Industry Group: 871

Contract Number: GS-23F-0008K

For more information on ordering from Federal Supply Schedules click on the FSS Schedules button at fss.gsa.gov.

Period Covered by Contract:

October 14, 1999 through October 13, 2019

Updated through Modification PO-0019, approved March 19, 2015

TASC Inc.

35 New England Business Ctr. Dr. Ste. 200

Andover, MA 01810 www.tasc.com

Contractor Business Size Classification: Large http://www.tasc.com/

GSA Contract # GS-23F-0008K (05/2015)

GSA PES Schedule Price List

Table of Contents

Section Page

Customer Information 1

About TASC 3

Special Item Number (SIN) Descriptions 5

Primary Engineering Disciplines Descriptions 7

Engineering Services Available Matrix of TASC SINs and Primary Disciplines 11

TASC Labor Category Descriptions 12

Contractor Site Pricing March 30, 2015 through March 30, 2019 59

Government Site Pricing March 30, 2015 through March 30, 2019 64

TASC, Inc.

Customer Information

1. A. Table of Awarded Special Item Numbers (SINs): See Page 5 for Descriptions SIN # - Page 5 TITLE

871-1 Strategic Planning for Technology Programs 871-1RC Strategic Planning for Technology Programs 871-2 Concept Development and Requirements Analysis 871-2RC Concept Development and Requirements Analysis 871-3 System Design, Engineering and Integration 871-3RC System Design, Engineering and Integration 871-4 Test and Evaluation 871-4RC Test and Evaluation 871-5 Integrated Logistics Support 871-5RC I Integrated Logistics Support 871-6 Acquisition and Life-cycle Management 871-6RC Acquisition and Life-cycle Management

B. Labor Rates – Page 59 C. Labor Category Descriptions – Page 12

2. Maximum Order: $1,000,000

3. Minimum Order: $100

4. Geographic Coverage: Worldwide

5. Points of Production: U.S.A.

6. Discounts from Pricelists: All prices herein are net

7. Other Discounts: A discount of 2% is applicable to new orders (excluding orders under existing Blanket Purchase Agreements) exceeding $1 million in value awarded on or after April 14, 2010.

8. Prompt Payment Terms: Net 30

9a. Government Commercial Credit Card (At or Below the Micropurchase Threshold): Accepted

9b. Government Commercial Credit Card (Above the Micropurchase Threshold): Accepted

10. Foreign Items: Not Applicable

11. A. Time of Delivery: specified on the Task Order

B. Expedited Delivery: Not applicable

C. Overnight and 2-day Delivery: Not applicable

D. Urgent Requirements: Not applicable

12. F.O.B Point(s): Destination

13a. Ordering Address: TASC Inc.

35 New England Business Ctr. Dr. Ste. 200 Andover, MA 01810.

Contract Administrator Program Manager TASC Inc. TASC Inc.

4801 Stonecroft Blvd 4801 Stonecroft Blvd Chantilly VA 20151 Chantilly VA 20151 Attn: Victoria Nguyen Attn: Robert Dallen Phone: 703-449-3064 Phone: 703-653-5706 Fax: 703-449-9352 Fax: 703-449-9352 victoria.nguyen@tasc.com robert.dallen@tasc.com mailto:victoria.nguyen@tasc.com mailto:robert.dallen@tasc.com

13b. Ordering Procedures: For supplies and services, the ordering procedures information on Blanket Purchase Agreements (BPA’s) are found in Federal Acquisition Regulation (FAR) 8.405-3.

14. Payment Addresses

Mailing Address Electronic Funds Transfer (EFT)

TASC Inc. JP Morgan Chase Bank PO Box 26712 New York, NY 10017 New York, NY 10087-6712 ACH Trans Service: 813-881-8630

ABA Routing #: See Invoice Account Type:

EFT Method:

Account Number: See Invoice Account Name: TASC Inc.

Reference: Contract # Invoice #

Overnight Mailing Address

JP Morgan Chase Bank 4 Metro Tech Center, 7th Floor Attn: Lockbox Processing Box #26712 Brooklyn, NY 11245 Phone Number: 1-800-562-5002

15. Warranty Provision: Not applicable.

16. Export Packing Charges: Not applicable.

17. Terms & Conditions of Government Purchase Card Acceptance (any thresholds above the micro-purchase level): None.

18. Terms & Conditions of rental, maintenance, and repair: Not applicable.

19. Terms & conditions of installation: Not Applicable.

20. Terms and conditions of repair parts indicating date of parts price lists and any discounts from list prices: Not applicable.

20a. Terms and conditions for any other services: None.

21. List of service and distribution points: Not applicable.

22. List of participating dealers: Not applicable.

23. Preventive Maintenance: Not applicable.

24a. Special attributes such as environmental attributes (e.g., recycled content, energy efficiency, and/or reduced pollutants): Not applicable.

24b. Section 508: TASC Inc. shall comply with Section 508 standards and requirements as specified in each Statement of Work (SOW) and its associated individual task/delivery order. Each SOW must specifically state the standards that must be met for accessibility relative to the product or service requested. More information regarding Section 508 can be found at the Government's web site, http://www.section508.gov/ .

25. Data Universal Number System (DUNS) Number: 06-934-1972.

26. Central Contractor Registration (CCR) Database: TASC, Inc. is registered in the Central Contractor Registration (CCR) Database.

http://www.section508.gov/

About TASC

Founded in 1966, TASC, Inc. helps solve complex national security and public safety challenges by providing advanced systems engineering, integration and decision-support services to the Intelligence Community, Department of Defense and civilian agencies of the federal government. TASC has partnered with our customers toward one goal—the success of their missions. Our broad portfolio of services includes mission operations, analysis and engineering; system and policy analysis; program, financial and acquisition management; enterprise engineering and integration; advanced concept and technology development; test and evaluation; independent verification and validation; and cybersecurity. With about 5,000 employees in 40 locations, TASC generates $1.5 billion in annual revenue. For more information and career opportunities, visit our website at www.tasc.com.

Our Capabilities

For over 45 years, TASC has provided engineering services to the Department of Defense, the Intelligence Community and civilian agencies of the federal government. Our mission-focused end-to-end systems engineering and analytic expertise enhances operationally deployed systems, guides acquisition of complex systems under development and directs development of future system architectures and technologies. TASC’s depth and breadth of experience are fully capable of supporting all elements of the PES schedule which includes the engineering disciplines of mechanical, electrical, chemical, components of civil engineering and sub-disciplines such as aerospace, nuclear, bioengineering and marine architecture.

Scope of Work

PES was established to provide a streamlined approach for federal agencies to access qualified and experienced firms in the engineering disciplines in accordance with applicable statutes and regulations.

Services specified in a task order may be performed at the contractor’s facilities or the ordering agencies’ facilities. The Government will determine the Contractor’s compensation by any of several different methods (to be specified at the task order level) e.g., a firm-fixed price for services with or without incentives, labor hours or time-and-materials.

There are four primary disciplines in the engineering field and hundreds of sub-disciplines or specialties associated with engineering disciplines. Below is a list of primary engineering disciplines with a partial list of sub-disciplines or specialties contemplated under PES. For specialties asterisked below, see paragraph entitled “Services Not Included”, for limitations on the extent to which the specialty is included.

Sampling of Professional Engineering Tasks

The following is a representative (not all inclusive) list of examples of the kinds of tasks that may be accomplished using the PES Schedule:

The following non-inclusive list represents a sampling of the types of engineering tasks contemplated:

Acquisition and life cycle management

Analysis of program goals, mission, objectives, performance Assessment Support

Computer Aided Design (CAD)

Computer Aided Engineering (CAE)

Computer Aided Management (CAM)

Concept development

D&D (decontamination and decommissioning) Demonstration and Validation

Design/Specifications of engineering nature not associated with real property

Documentation and Information Dissemination

Economic/Business case analysis

Economic impact evaluations http://www.tasc.com/

Education/training

Environmental control for electrical units (e.g., cooling units)

Forensic engineering

Independent Verification and Validation (IV&V)

Information services (studies, impact statements, program development, project documentation, data collection, data analysis/evaluation, etc.)

Instrumentation

Integration

Investigative Engineering Service

Life Cycle Costing

Logistics

Long-term Reliability and Maintainability

Migration Strategy

National Academy of Sciences studies

Operations Research (Non R&D)

Plan, organize, establish, implement, manage, maintain, upgrade and control of technical systems

Privatization

Program and Project management

Prototype development and first article(s) production

Radar/Sonar

Regulatory compliance support

Reliability and Maintainability Analysis

Reverse engineering

Signal processing

Simulation and modeling

Source data development (forward engineering hardware and software systems)

Source data validation (existing hardware and software systems)

TASC, Inc. GSA Contract # GS-23F-0008K (May 2015) 5

Special Item Number (SIN) Descriptions

871– 1/871-1RC Strategic Planning for Technology Programs

Services required under this SIN involve the definition and interpretation of high level organizational engineering performance requirements such as projects, systems, missions, etc., and the objectives and approaches to their achievement. Typical associated tasks include, but are not limited to an analysis of mission, program goals and objectives, program evaluations, analysis of program effectiveness, requirements analysis, organizational performance assessment, special studies and analysis, training, and consulting.

Example: The evaluation and preliminary definition of new and/or improved performance goals for navigation satellites such as launch procedures and costs, multi-user capability, useful service life, accuracy and resistance to natural and man-made electronic interference.

PES does not include architect-engineer services as defined in the Brooks Act and FAR Part 2. PES does not include design or construction services as defined in the Federal Acquisition Regulation Part 36 and Part 2.

871– 2/871-2RC Concept Development and Requirements Analysis

Services required under this SIN involve abstract or concept studies and analysis, requirements definition, preliminary planning, the evaluation of alternative technical approaches and associated costs for the development of enhancement of high level general performance specifications of a system, project, mission or activity. Typical associated tasks include, but are not limited to requirements analysis, cost/cost performance trade-off analysis, feasibility analysis, developing and completing fire safety evaluation worksheets as they relate to professional engineering services, regulatory compliance support, technology/system conceptual designs, training, and consulting.

Example: The development and analysis of the total mission profile and life cycle of the improved satellite including examination of performance and cost tradeoffs.

PES does not include architect-engineer services as defined in the Brooks Act and FAR Part 2. PES does not include design

871– 3/871-3RC System Design, Engineering and Integration

Services required under this SIN involve the translation of a system (or subsystem, program, project, activity) concept into a preliminary and detailed design (engineering plans and specifications), performing risk identification/analysis, mitigation, traceability, and then integrating the various components to produce a working prototype or model of the system. Typical associated tasks include, but are not limited to computer-aided design, e.g. CADD, design studies and analysis, design review services, shop drawing review services, submittal review services, conducting fire protection facility surveys, developing risk reduction strategies and recommendations to mitigate identified risk conditions, fire modeling, performance-based design reviews, high level detailed specification and scope preparation, configuration, management and document control, fabrication, assembly and simulation, modeling, training, and consulting.

Example: The navigation satellite concept produced in the preceding stage will be converted to a detailed engineering design package, performance will be computer simulated and a working model will be built for testing and design verification.

PES does not include architect-engineer services as defined in the Brooks Act and FAR Part 2. PES does not include design

871– 4/871-4RC Test and Evaluation

Services required under this SIN involve the application of various techniques demonstrating that a system (subsystem, program, project or activity) performs in accordance with the objectives outlined in the original design. Typical associated tasks include, but are not limited to testing of a prototype, first article(s) testing, environmental testing, performing inspections and witnessing acceptance testing of fire protection and life safety systems as they relate to professional engineering services, independent verification and validation, reverse engineering, simulation and modeling (to test the feasibility of a concept), system, quality assurance, physical testing of the product system, training, and consulting.

TASC, Inc. GSA Contract # GS-23F-0008K (May 2015) 6

Example: The navigation satellite-working model will be subjected to a series of tests, which may simulate and ultimately duplicate its operational environment.

PES does not include architect-engineer services as defined in the Brooks Act and FAR Part 2. PES does not include design

871– 5/871-5RC Integrated Logistics Support

Services required under this SIN involves the analysis, planning and detailed design of all engineering specific logistics support including material goods, personnel, and operational maintenance and repair of systems throughout their lifecycles, excluding those systems associated with real property. Typical associated tasks include, but are not limited to ergonomic/human performance analysis, feasibility analysis, logistics planning, requirements determination, policy standards/procedures development, conducting research studies, long-term reliability and maintainability, training, and consulting.

Example: The full range of life cycle logistics support for the navigation satellite will be identified and designed in this stage including training, operation and maintenance requirements, and replacement procedures.

PES does not include architect-engineer services as defined in the Brooks Act and FAR Part 2. PES does not include design

871– 6/871-6RC Acquisition and Life-cycle Management

Services required under this SIN involve all of the planning, budget, contract and systems/program management functions required to procure and or/produce, render operational and provide life cycle support (maintenance, repair, supplies, engineering specific logistics) to (technology based) systems, activities, subsystems, projects, etc. Typical associated tasks include, but are not limited to operation and maintenance, evaluation of inspection, testing, and maintenance program for fire protection and life safety systems, program/project management, technology transfer/insertion, training and consulting.

Example: During this stage the actual manufacturing, launch, and performance monitoring of the navigation satellite will be assisted through project management, configuration management, reliability analysis, engineering retrofit improvements and similar functions.

PES does not include architect-engineer services as defined in the Brooks Act and FAR Part 2. PES does not include design

TASC, Inc. GSA Contract # GS-23F-0008K (May 2015) 7

Primary Engineering Disciplines Descriptions

Electrical Engineering:

Planning, design, development, evaluation and operation of electrical principles, models and processes. It includes, but is not limited to, the design, fabrication, measurement and operation of electrical devices, equipment and systems (e.g., signal processing; telecommunication; sensors, microwave, and image processing; micro-fabrication; energy systems and control; micro- and nano-electronics; plasma processing; laser and photonics; satellites, missiles and guidance systems, space vehicles, fiber optics, robotics, etc.).

Within the electrical engineering discipline, there are many specialties within the scope of this work; a partial listing follows:

Aerospace and Electronic Systems Antennas and Propagation Broadcast Technology

Circuits and Systems

Computer Communications

Consumer Electronics Components Packaging, and Manufacturing Technology

Dielectrics and Electrical Insulation Education Control Systems Remote Sensing Engineering Management

Electromagnetic Compatibility

Information Theory

Lasers & Electro-Optics Industrial Electronics

Intelligent Transportation Systems Industry Applications

Instrumentation and Measurement

Nuclear and Plasma Sciences Magnetics Microwave Theory and Techniques

Power Electronics Neural Networks Council Oceanic Engineering

Reliability Robotics & Automation Professional Communication

Solid-State Circuits Systems, Man, and Cybernetics

Vehicular Technology Ultrasonics, Ferroelectrics, and Frequency Control

Signal Processing on Social Implications of Technology

TASC, Inc. GSA Contract # GS-23F-0008K (May 2015) 8

Mechanical Engineering:

Planning, development, evaluation and control of systems and components involving the production and transfer of energy and with the conversion of one form of energy to another. It includes, but is not limited to, planning and evaluation of power plants, analysis of the economical combustion of fuels, conversion of heat energy into mechanical energy, use of mechanical energy to perform useful work, analysis of structures and motion in mechanical systems, and conversion of raw materials into a final product, etc. (e.g., thermodynamics, mechanics, fluid mechanics, jets, rocket engines, internal combustion engines, steam and gas turbines, continuum mechanics, dynamic systems, dynamics fluid mechanics, heat transfer, manufacturing, materials, solid mechanics, reactors, etc.).

Within the mechanical engineering discipline, there are many specialties within the scope of this work; a partial listing

ASME K16-Heat Transfer Advanced Energy Systems Aerospace Engineering

Applied Mechanics Bioengineering Tribology

Dynamic Systems and Control Electrical and Electronic Packaging Fluids Engineering

Fluids Power Systems and Technology Systems

Materials

Management

Nuclear Engineering

Offshore Mechanics and Arctic Engineering

Power

Rail Transportation

Technology and Society

Fuels and Combustion Technologies

Manufacturing Engineering *

Internal Combustion Engineering

Materials Handling Engineering*

Textile Engineering

Non-Destructive Evaluation Engineering

TFTP-MC-990871-B Refresh: 17 Part I - GOODS & SERVICES

Page: 2 of 191

Pressure Vessels and Piping Safety Engineering and Risk Analysis

Heat Transfer International Gas

Turbine Microchannel flow and heat transfer Noise Control and Acoustics

Design/Specification-associated personal property

Ocean Engineering

Process Industries

Solar Energy

TASC, Inc. GSA Contract # GS-23F-0008K (May 2015) 9

Chemical Engineering:

Planning, development, evaluation and operation of chemical, biochemical or physical plants and processes. Changes in composition, energy content, state of aggregation of materials, forces that act on matter, and relationships are examined between new and conventional chemical materials, products and processes are produced and/or manufactured. It includes, but is not limited to, planning, evaluating or operation of chemical plants and petroleum refineries, pollution control systems, biochemical processes, plastics, pharmaceuticals, fibers; analysis of chemical reactions that take place in mixtures; determination of methodologies for the systematic design, control and analysis of processes, evaluating economics, safety, etc.

Within the chemical engineering discipline, there are many specialties within the scope of this work; a partial listing

Refining

Petrochemicals

Food

Pharmaceuticals

Textiles

Pulp and Paper

Ceramics

Electronic Components & Chemicals

Biotechnology

Safety engineering

Civil Engineering:

It includes, but is not limited to, planning, evaluation, operations, production, furnishing, construction, alteration, repai r, processing or assembling of vessels, aircraft, or other kinds of personal property, including heating, ventilation and ai r-conditioning for such vessels and/or aircraft.

Within the civil engineering discipline, there are several specialties within the scope of this work; a partial listing follows:

Geotechnical

Surveying

Note: Surveying as it relates to real property is not appropriate nor is it solicited under this Schedule

TASC, Inc. GSA Contract # GS-23F-0008K (May 2015) 10

Services Not Included:

The following services are not offered under PES Schedule 871

1. Production and Manufacturing:

Mass production or manufacturing of standardized products on production or assembly lines is not being solicited. The manufacture, fabrication, installation or production for the purpose of developing working models or prototypes that may be used for further testing, analysis and evaluation before full scale production begins IS allowed under the PES schedule.

The number of prototypes or working models to be produced is dependent upon the ordering activities requirement for testing and analysis. However, the predominate amount of the work on PES task orders should be performed by professional labor categories.

2. Computer Engineering and Information Technology:

Offerors interested in providing computer/software engineering and information technology services are directed to contact GSAs Group 70 Schedule for Information Technology for additional information at (703) 605-2700.

3. Environmental Advisory Services as listed below are not being solicited:

Environmental Planning Services & Documentation (i.e., environmental impact statements; endangered species, wetlands, watersheds and other natural resource management plans, studies and consultations; archeological, historic and other cultural resources management plans, studies, and consultations; economic, technical, and risk analyses in support of environmental needs)

Environmental compliance services (i.e., environmental compliance audits; compliance management planning; pollution prevention surveys; Environmental/occupational training services specific to environmental planning and environmental compliance as discussed above (i.e., conventional course development and presentation; customized courses to meet specific needs; computer-based interactive course development)

Waste management services (i.e., data collection, data development, analyses of comments, regulatory and economic analyses, feasibility analyses, hazard assessments, exposure assessments, and risk analyses.

Examples include, but are not limited to development of waste characterization studies and recommendations for management strategy including identification of recycling options. Assessments might include studies relating to collection and transfer of waste, source reduction, and evaluation of energy/fuel options. Services could include data collection, data development, analyses of comments, regulatory and economic analyses, feasibility analyses, hazard assessments, exposure assessments and risk analyses.

Hazardous materials management advisory services (i.e., furnishing of Material Safety Data Sheets (MDSD) by compact disc, on-line via Internet, mail or facsimile (FAX); reporting and compliance software, hazardous materials tracking software and other related software/services. Telephone advisory services (i.e., telephone assistance with hazardous material spills, poisons, MSDS, and other related services). Offerors interested in providing environmental advisory services are directed to contact GSAs Group 899 Schedule for additional information (contact 1-800- 241-RAIN).

4. Foundations and Landscaping Engineering:

Offerors interested in providing foundations and landscaping engineering are directed to contact GSAs PBS for additional information.

5. Heating, Ventilation and Air-Conditioning (HVAC) Services Related to Buildings, Structures, or Other Real Property Set Forth for Construction and Architect-Engineering Services Governed by FAR Part 36:

Offerors interested in providing these types of services are directed to contact GSAs Public Buildings Service (PBS), at

(202) 501-1100 or visit www.gsa.gov/pbs for additional information. Please note: HVAC services related to the manufacture, production, furnishing, construction, alteration, repair, processing or assembling of vessels, aircraft, or other kinds of personal property IS included and solicited within the scope of PES.

6. Research and Development as Set Forth in FAR Part 35, which governs open-ended research with no specific deliverables, is not allowed under this schedule. However, research, analysis, and developmental work related to providing a solution to an engineering requirement is allowed under the PES schedule.

http://www.gsa.gov/pbs

TASC, Inc. GSA Contract # GS-23F-0008K (May 2015) 11

Engineering Services Available Matrix of TASC SINs and Primary Disciplines

SIN 871-1 SIN 871-2 SIN 871-3 SIN 871-4 SIN 871-5 SIN 871-6

Strategic Primary

Engineering Discipline

Planning For Technology Programs

Concept and Requirements Development

Sys Design Engineering and

Integration

Test and

Evaluation

Integrated Logistics Support

Acquisition and Life Cycle Management

Electrical

See page 7 examples of

Sub Disciplines

Yes Yes Yes Yes Yes Yes

Mechanical See page 8 examples of

Chemical

See page 9 examples of

Yes Yes Yes

Civil

See page 9 examples of

TASC Engineering Offerings Matrix

TASC, Inc. GSA Contract # GS-23F-0008K (May 2015) 12

TASC Labor Category Descriptions

Staff Qualifications

Consistent with TASCs hiring practices, experience can be substituted for education and education for experience.

Experience, education and description of duties for the service categories in the schedule are provided as a guideline to the typical background for staff to be provided under individual orders.

ENGINEER SPECIALIST LEVEL 3

General Experience: Minimum of 15 years experience in a disciplined branch of engineering. Strong working knowledge in one or more of the following disciplines; systems engineering, electrical engineering, human factors engineering, civil engineering/architecture, optical engineering, materials science & engineering, industrial engineering (manufacturing), electronic packaging, reliability and maintainability (R&M) engineering, structural engineering, CAD/CAM, aeronautical engineering, guidance & navigation, quality engineering, test engineering, training, environmental engineering, Command and Control (C

) systems engineering, or electromagnetic compatibility (EMC).

Specialized Experience: Must have a minimum of 5 years of experience as a lead engineer on complex programs. Works independently and applies expert knowledge of state of the art technologies; provides technical guidance to project leaders and program managers. Regularly serves as an advisor to all levels of staff on problems of unusual complexity. Recognized authority within field of expertise and extensive knowledge of related fields. Guides users in the research, development and systems engineering of specialty systems including analyses and technical documentation development.

Education: Must have a Bachelor’s degree or higher in one or more of the following engineer disciplines: Chemical, Civil, Electrical or Mechanical Engineering. Advanced degree holders will require shorter periods of general experience than holders of Bachelor degrees. For Master degree, general experience required is 10 years. For Doctorate degree holders, general experience required is 7 years. Specialized experience requirements remain the same.

ENGINEER SPECIALIST LEVEL 2

General Experience: Minimum of 10 years experience in a disciplined branch of engineering. Strong working knowledge in one or more of the following disciplines; systems engineering, civil engineering/architecture, electrical engineering, human factors engineering, optical engineering, materials science & engineering, industrial engineering (manufacturing), electronic packaging, reliability and maintainability (R&M) engineering, structural engineering, CAD/CAM, aeronautical engineering, guidance & navigation, quality engineering, test engineering, training, environmental engineering, Command and Control (C

Specialized Experience: Must have a minimum of 3 years experience as a lead engineer on complex programs. Works independently and applies expert knowledge of state of the art technologies; provides technical guidance to project leaders and program managers. Regularly serves as an advisor to all levels of staff on problems of unusual complexity. Recognized authority within field of expertise and extensive knowledge of related fields. Guides users in the research, development and systems engineering of specialty systems including analyses and technical documentation development.

Education: Must have a Bachelor’s degree or higher in one or more of the following engineer disciplines: Chemical, Civil, Electrical or Mechanical Engineering. Advanced degree holders will require shorter periods of general experience than holders of Bachelor degrees. For Masters degree, general experience required is 6 years. For Doctorate degree holders, general experience required is 4 years. Specialized experience requirements remain the same.

ENGINEER SPECIALIST LEVEL 1

General Experience: Minimum of 5 years experience in a disciplined branch of engineering. Strong working knowledge in one or more of the following disciplines; systems engineering, civil engineering/architecture, electrical engineering, human factors engineering, optical engineering, materials science & engineering, industrial engineering (manufacturing), electronic packaging, reliability and maintainability (R&M) engineering, structural engineering, CAD/CAM, aeronautical

TASC, Inc. GSA Contract # GS-23F-0008K (May 2015) 13 engineering, guidance & navigation, quality engineering, test engineering, training, environmental engineering, Command and Control (C

Specialized Experience: Must have a minimum of 1 year experience as a lead engineer on complex programs. Works independently and applies expert knowledge of state of the art technologies; provides technical guidance to project leaders and program managers. Regularly serves as an advisor to all levels of staff on problems of unusual complexity. Recognized authority within field of expertise and extensive knowledge of related fields. Guides users in the research, development and systems engineering of specialty systems including analyses and technical documentation development.

Education: Must have a Bachelor’s degree or higher in one or more of the following engineer disciplines: Chemical, Civil, Electrical or Mechanical Engineering or Computer Science degree. Advanced degree holders will require shorter period s of general experience than holders of Bachelor degrees. For Masters degree, general experience required is 3 years. For Doctorate degree holders, general experience required is 1 year. Specialized experience requirements remain the same.

PRINCIPAL ENGINEER LEVEL 5

General Experience: Minimum of 15 years of experience as an engineer in one or more of the engineering disciplines of Chemical, Civil, Electrical, or Mechanical Engineering or “sub-disciplines” related to them including, but not limited to the following examples: Safety, Bioengineering, Structural, Transportation, Geotechnical, Aerospace and Electronic Systems, Geoscience, Information Theory, Lasers & Electro Optics, Communications, Engineering Management, Industrial, Manufacturing Nuclear, Signal processing, Applied Mechanics, Fluids and Fuels, etc. Duties typically involve performing engineering services that may include but are not limited to the following: engineering studies and analyses; technology planning; systems architecture development; requirements development; concept development; systems design; system development and integration; test and evaluation; systems operation; construction; control of systems and components;

integrated logistics support; modeling and simulation; configuration management; and systems acquisition and life-cycle management in compliance with current Industry and Government practices.

Specialized Experience: Must have a minimum of 5 years professional experience as lead engineer on very complex programs. Works independently; applies expert knowledge of state-of-the-art technologies; provides technical guidance to project leaders and program managers. Regularly serves as an advisor to all levels of staff on problems of unusual complexity. Recognized authority within field of expertise and extensive knowledge of related fields.

Education: Must have a Bachelor's degree or higher in one or more of the engineering disciplines of Chemical, Civil, Electrical, or Mechanical Engineering or “sub-disciplines” related to them as described in the General Experience section above. Advanced degree holders will require shorter periods of general experience than holders of Bachelor degrees. For Masters degrees, general experience required is 13 years. For Doctorate degree holders, general experience required is 10 years. Specialized experience requirements remain the same.

PRINCIPAL ENGINEER LEVEL 4

General Experience: Minimum of 15 years of experience as an engineer in one or more of the engineering disciplines of Chemical, Civil, Electrical, or Mechanical Engineering or “sub-disciplines” related to them including, but not limited to the following examples: Safety, Bioengineering, Structural, Transportation, Geotechnical, Aerospace and Electronic Systems, Geoscience, Information Theory, Lasers & Electro Optics, Communications, Engineering Management, Industrial, Manufacturing Nuclear, Signal processing, Applied Mechanics, Fluids and Fuels, etc. Duties typically involve performing engineering services that may include but are not limited to the following: engineering studies and analyses; technology planning; systems architecture development; requirements development; concept development; systems design; system development and integration; test and evaluation; systems operation; construction; control of systems and components;

integrated logistics support; modeling and simulation; configuration management; and systems acquisition and life-cycle

Specialized Experience: Must have a minimum of 4 years professional experience as lead engineer on very complex programs. Works independently; applies expert knowledge of state-of-the-art technologies; provides technical guidance to project leaders and program managers. Regularly serves as an advisor to all levels of staff on problems of unusual complexity. Recognized authority within field of expertise and extensive knowledge of related fields.

TASC, Inc. GSA Contract # GS-23F-0008K (May 2015) 14

Education: Must have a Bachelor's degree or higher in one or more of the engineering disciplines of Chemical, Civil, Electrical, or Mechanical Engineering or “sub-disciplines” related to them as described in the General Experience section above. Advanced degree holders will require shorter periods of general experience than holders of Bachelor degrees. For Masters degrees, general experience required is 13 years. For Doctorate degree holders, general experience required is

PRINCIPAL ENGINEER LEVEL 3

General Experience: Minimum of 15 years of experience as an engineer in one or more of the engineering disciplines of Chemical, Civil, Electrical, or Mechanical Engineering or “sub-disciplines” related to them including, but not limited to the following examples: Safety, Bioengineering, Structural, Transportation, Geotechnical, Aerospace and Electronic Systems, Geoscience, Information Theory, Lasers & Electro Optics, Communications, Engineering Management, Industrial, Manufacturing Nuclear, Signal processing, Applied Mechanics, Fluids and Fuels, etc. Duties typically involve performing engineering services that may include but are not limited to the following: engineering studies and analyses; technology planning; systems architecture development; requirements development; concept development; systems design; system development and integration; test and evaluation; systems operation; construction; control of systems and components;

integrated logistics support; modeling and simulation; configuration management; and systems acquisition and life-cycle

Specialized Experience: Must have a minimum of 3 years professional experience as lead engineer on very complex programs. Works independently; applies expert knowledge of state-of-the-art technologies; provides technical guidance to project leaders and program managers. Regularly serves as an advisor to all levels of staff on problems of unusual complexity. Recognized authority within field of expertise and extensive knowledge of related fields.

Education: Must have a Bachelor's Degree or higher in one or more of the engineering disciplines of Chemical, Civil, Electrical, or Mechanical Engineering or “sub-disciplines” related to them as described in the General Experience section above. Advanced degree holders will require shorter periods of general experience than holders of Bachelor degrees. For Masters degrees, general experience required is 13 years. For Doctorate degree holders, general experience required is 10 years. Specialized experience requirements remain the same.

PRINCIPAL ENGINEER LEVEL 2

General Experience: Minimum of 15 years of experience as an engineer in one or more of the engineering disciplines of Chemical, Civil, Electrical, or Mechanical Engineering or “sub-disciplines” related to them including, but not limited to the following examples: Safety, Bioengineering, Structural, Transportation, Geotechnical, Aerospace and Electronic Systems, Geoscience, Information Theory, Lasers & Electro Optics, Communications, Engineering Management, Industrial, Manufacturing Nuclear, Signal processing, Applied Mechanics, Fluids and Fuels, etc. Duties typically involve performing engineering services that may include but are not limited to the following: engineering studies and analyses; technology planning; systems architecture development; requirements development; concept development; systems design; system development and integration; test and evaluation; systems operation; construction; control of systems and components;

integrated logistics support; modeling and simulation; configuration management; and systems acquisition and life -cycle

Specialized Experience: Must have a minimum of 2 years professional experience as lead engineer on very complex programs. Works independently; applies expert knowledge of state-of-the-art technologies; provides technical guidance to project leaders and program managers. Regularly serves as an advisor to all levels of staff on problems of unusual complexity. Recognized authority within field of expertise and extensive knowledge of related fields.

Education: Must have a Bachelor's degree or higher in one or more of the engineering disciplines of Chemical, Civil, Electrical, or Mechanical Engineering or “sub-disciplines” related to them as described in the General Experience section above. Advanced degree holders will require shorter periods of general experience than holders of Bachelor degrees. For Masters degrees, general experience required is 13 years. For Doctorate degree holders, general experience required is 10

TASC, Inc. GSA Contract # GS-23F-0008K (May 2015) 15

PRINCIPAL ENGINEER LEVEL 1

General Experience: Minimum of 15 years of experience as an engineer in one or more of the engineering disciplines of Chemical, Civil, Electrical, or Mechanical Engineering or “sub-disciplines” related to them including, but not limited to the following examples: Safety, Bioengineering, Structural, Transportation, Geo-technical, Aerospace and Electronic Systems, Geo-science, Information Theory, Lasers & Electro Optics, Communications, Engineering Management, Industrial, Manufacturing Nuclear, Signal processing, Applied Mechanics, Fluids and Fuels, etc. Duties typically involve performing engineering services that may include but are not limited to the following: engineering studies and analyses; technology planning; systems architecture development; requirements development; concept development; systems design; system development and integration; test and evaluation; systems operation; construction; control of systems and components;

integrated logistics support; modeling and simulation; configuration management; and systems acquisition and life -cycle

Specialized Experience: Must have a minimum of 1 year professional experience as lead engineer on very complex programs. Works independently; applies expert knowledge of state-of-the-art technologies; provides technical guidance to project leaders and program managers. Regularly serves as an advisor to all levels of staff on problems of unusual complexity. Recognized authority within field of expertise and extensive knowledge of related fields.

Education: Must have a Bachelor's degree or higher in one or more of the engineering disciplines of Chemical, Civil, Electrical, or Mechanical Engineering or “sub-disciplines” related to them as described in the General Experience section above. Advanced degree holders will require shorter periods of general experience than holders of Bachelor degrees. For Masters degrees, general experience required is 13 years. For Doctorate degree holders, general experience required is

SENIOR ENGINEER LEVEL 5

General Experience: Minimum of 10 years of experience as an engineer in one or more of the engineering disciplines of Chemical, Civil, Electrical, or Mechanical Engineering or “sub-disciplines” related to them including, but not limited to the following examples: Safety, Bioengineering, Structural, Transportation, Geo-technical, Aerospace and Electronic Systems, Geo-science, Information Theory, Lasers & Electro Optics, Communications, Engineering Management, Industrial, Manufacturing Nuclear, Signal processing, Applied Mechanics, Fluids and Fuels, etc. Duties typically involve performing engineering services that may include but are not limited to the following: engineering studies and analyses; technology planning; systems architecture development; requirements development; concept development; systems design; system development and integration; test and evaluation; systems operation; construction; control of systems and components;

integrated logistics support; modeling and simulation; configuration management; and systems acquisition and life-cycle

Specialized Experience: Must have a minimum of 5 years professional experience as an engineer on complex programs.

Works independently; applies expert knowledge of state-of-the-art technologies; provides technical guidance to project leaders and program managers. Serves as a technical advisor on complex problems to other staff members; stimulates others through ideas and information.

Education: Must have a Bachelor's degree or higher in Engineering, Chemical Engineering, Civil Engineering, Electrical Engineering, Mechanical Engineering, “sub-disciplines” related to them as described in the General Experience section above. Advanced degree holders will require shorter periods of general experience than holders of Bachelor degrees. For Masters degrees, general experience required is 8 years. For Doctorate degree holders, general experience required is 5

SENIOR ENGINEER LEVEL 4

General Experience: Minimum of 10 years of experience as an engineer in one or more of the engineering disciplines of Chemical, Civil, Electrical, or Mechanical Engineering or “sub-disciplines” related to them including, but not limited to the following examples: Safety, Bioengineering, Structural, Transportation, Geo-technical, Aerospace and Electronic Systems, Geo-science, Information Theory, Lasers & Electro Optics, Communications, Engineering Management, Industrial, Manufacturing Nuclear, Signal processing, Applied Mechanics, Fluids and Fuels, etc. Duties typically involve performing

TASC, Inc. GSA Contract # GS-23F-0008K (May 2015) 16 engineering services that may include but are not limited to the following: engineering studies and analyses; technology planning; systems architecture development; requirements development; concept development; systems design; system development and integration; test and evaluation; systems operation; construction; control of systems and components;

integrated logistics support; modeling and simulation; configuration management; and systems acquisition and life -cycle

Specialized Experience: Must have a minimum of 4 years professional experience as an engineer on complex programs.

Works independently; applies expert knowledge of state-of-the-art technologies; provides technical guidance to project leaders and program managers. Serves as a technical advisor on complex problems to other staff members; stimulates

Education: Must have a Bachelor's degree or higher in Engineering, Chemical Engineering, Civil Engineering, Electrical Engineering, Mechanical Engineering, or “sub-disciplines” related to them as described in the General Experience section above. Advanced degree holders will require shorter periods of general experience than holders of Bachelor degrees. For Masters degrees, general experience required is 8 years. For Doctorate degree holders, general experience required is 5

SENIOR ENGINEER LEVEL 3

General Experience: Minimum of 10 years of experience as an engineer in one or more of the engineering disciplines of Chemical, Civil, Electrical, or Mechanical Engineering or “sub-disciplines” related to them including, but not limited to the following examples: Safety, Bioengineering, Structural, Transportation, Geo-technical, Aerospace and Electronic Systems, Geo-science, Information Theory, Lasers & Electro Optics, Communications, Engineering Management, Industrial, Manufacturing Nuclear, Signal processing, Applied Mechanics, Fluids and Fuels, etc. Duties typically involve performing engineering services that may include but are not limited to the following: engineering studies and analyses; technology planning; systems architecture development; requirements development; concept development; systems design; system development and integration; test and evaluation; systems operation; construction; control of systems and components;

integrated logistics support; modeling and simulation; configuration management; and systems acquisition and life -cycle

Specialized Experience: Must have a minimum of 3 years professional experience as an engineer on complex programs.

Works independently; applies expert knowledge of state-of-the-art technologies; provides technical guidance to project leaders and program managers. Serves as a technical advisor on complex problems to other staff members; stimulates

Education: Must have a Bachelor's degree or higher in Engineering, Chemical Engineering, Civil Engineering, Electrical Engineering, Mechanical Engineering, “sub-disciplines” related to them as described in the General Experience section above. Advanced degree holders will require shorter periods of general experience than holders of Bachelor degrees. For Masters degrees, general experience required is 8 years. For Doctorate degree holders, general experience required is 5

SENIOR ENGINEER LEVEL 2

General Experience: Minimum of 10 years of experience as an engineer in one or more of the engineering disciplines of Chemical, Civil, Electrical, or Mechanical Engineering or “sub-disciplines” related to them including, but not limited to the following examples: Safety, Bioengineering, Structural, Transportation, Geo-technical, Aerospace and Electronic Systems, Geo-science, Information Theory, Lasers & Electro Optics, Communications, Engineering Management, Industrial, Manufacturing Nuclear, Signal processing, Applied Mechanics, Fluids and Fuels, etc. Duties typically involve performing engineering services that may include but are not limited to the following: engineering studies and analyses; technology planning; systems architecture development; requirements development; concept development; systems design; system development and integration; test and evaluation; systems operation; construction; control of systems and components;

integrated logistics support; modeling and simulation; configuration management; and systems acquisition and life -cycle

TASC, Inc. GSA Contract # GS-23F-0008K (May 2015) 17

Specialized Experience: Must have a minimum of 2 years professional experience as an engineer on complex programs.

Works independently; applies expert knowledge of state-of-the-art technologies; provides technical guidance to project leaders and program managers. Serves as a technical advisor on complex problems to other staff members; stimulates

Education: Must have a Bachelor's degree or higher in Engineering, Chemical Engineering, Civil Engineering, Electrical Engineering, Mechanical Engineering, or “sub-disciplines” related to them as described in the General Experience section above.