MAS - Advanced Testing Technologies Inc. - GS07F211AA

BRAT ®

An Authorized Federal Supply Schedule

Advanced Testing Technologies, Inc. 110 Ricefield Lane, Hauppauge, NY 11788Advanced Testing Technologies, Inc. 110 Ricefield Lane, Hauppauge, NY 11788

07F-211AA

General Services Administration Federal Supply Service

GSA Advantage prices are Net (Discount taken plus IFF)

APPENDICES

Pricing for these Products can be found in GSA Advantage

Benchtop Reconfigurable Automatic Tester

Multiple Award Schedule (MAS)

Page i

2024 GSA Catalog Price List

All Prices Are “Out Of The Box” FOB N.Y. And Include Instrument Software Drivers. Prices Subject To Change without Notice. Individual Items Can Not Be Ordered To Form a System.

Source Selection Information - SEE FAR 3.104

MOD0108 I.indd Effective Date: 05-30-24

General Contract Information

Schedule Title: Multiple Award Schedule (MAS)

Contract Number: GS-07F-211AA

Modification Number: 0108

Contract Period: April 1, 2013 - April 1, 2028

Business Size: Small

Socioeconomic Indicators: None

Table of Awarded SINs:

SIN Description

334515 Avionics Test Equipment

NEW Introduction of New Services/Products (INSP)

334515 Equipment Maintenance and Repair

334515 Post-Purchase Calibration or Calibration Traceability

334515 Extended Warranty

532490ESA Service Agreement

611430TTS Technical Training and Support (TTS)

541990TAD Technical/Application Development Support (TADS)

334515 Leasing of Equipment

Page ii

All Prices Are “Out Of The Box” FOB N.Y. And Include Instrument Software Drivers. Prices Subject To Change without Notice. Individual Items Can Not Be Ordered To Form a System.

Source Selection Information - SEE FAR 3.104

MOD0108 I.indd Effective Date: 05-30-24

General Contract Information

Lowest Priced Model Number and Price for Each SIN:

(Government Net Price Plus IFF Based on a Unit of One)

SIN Description Price

334515 04000040-01 115.00

NEW SEOM-O-01 357,000.00

334515 RS95650702-01 1,062.00

334515 FSC93000293-01 924.00

334515 W511B 12,830.00

532490ESA DCPS INTERCONNECT 957.00

611430TTS BTS-01 2000.00

541990TAD JT-1006 16.18

Maximum Order: $300,000 per SIN and $300,000 per order

Minimum Order: None

Point of Production: Hauppauge, New York 11788-2008

Quantity Discount(s): 6% for 5-10 units plus the IFF

Prompt Payment Terms: Net 30

Payment Address: Same as contractor

Foreign Items: As applicable or none

Time of Delivery: Shipped 180 days after receipt of order

Expedited Delivery: Contact contractor’s representative

Overnight and 2-Day Delivery: If available, contact contractor for rates

Page iii

All Prices Are “Out Of The Box” FOB N.Y. And Include Instrument Software Drivers. Prices Subject To Change without Notice. Individual Items Can Not Be Ordered To Form a System.

Source Selection Information - SEE FAR 3.104

MOD0108 I.indd Effective Date: 05-30-24

General Contract Information

F.O.B. Point: Destination

Ordering Address: Same as contractor

Export Packing Charges: Not applicable

Terms and Conditions of None Government Purchase Card Acceptance:

Terms and Conditions of Rental, As applicable Maintenance, and Repair:

Terms and Conditions of Installation: As applicable

Terms and Conditions of Repair Parts N/A or as applicable Indicating Date of Parts Price Lists and Any Discounts from List Prices:

Terms and Conditions for Any N/A or as applicable Other Services:

List of Service and Distribution Points: N/A or as applicable

List of Participating Dealers: None

Preventative Maintenance: Not applicable

Special Attributes such as Not applicable Environmental Attributes:

Section 508 Compliance for EIT: As applicable

UEI Number: SP9SDCSMMX78

Notification Regarding Registration in Contractor has an active registration in the SAM database System for Award Management (SAM) Database:

Standard Software License Terms and Appendix A Conditions Apply to Catalog Items as Indicated in the Item Nomenclature:

Test Program Set (TPS) Terms and Appendix B Conditions:

BRAT Contractor Support - BRAT Tester Appendix C All Inclusive Support and Repairs Terms and Conditions:

Page iv

All Prices Are “Out Of The Box” FOB N.Y. And Include Instrument Software Drivers. Prices Subject To Change without Notice. Individual Items Can Not Be Ordered To Form a System.

Source Selection Information - SEE FAR 3.104

MOD0108 I.indd Effective Date: 05-30-24

General Contract Information

Leasing: Appendix D

BRAT Contractor Support - BRAT Tester Appendix E All Inclusive Support, Repair and Calibration Terms and Conditions:

Obsolescence Mitigation: Appendix G

Products - Without Qualification Test Appendix H Procedures and Reverse Engineering:

Sustaining Engineering with Appendix I Obsolescence Mitigation - Base Year:

Sustaining Engineering with Appendix J Obsolescence Mitigation - Option Year:

Cable and DDSM Repairs - Special Appendix K Conditions:

All prices are “Out Of The Box” FOB N.Y. and include instrument software drivers. Prices subject to change without notice. Individual items can not be ordered to form a system.

Source Selection Information - SEE FAR 3.104

MOD0108.indd Effective Date: 05-30-24

A1

Appendix A ICSS Software License Agreement Terms and Conditions

This Software License Agreement is entered into by and between ICS Systems, Inc. (“ICSS”) and the Government of the United States of America (“Licensee”) effective as of the date that the Licensee purchases any software product on this GSA schedule.

Licensee has acquired the right to use one or more of the following: ICSS TCASE Run-Time Software (protected by Mitigator® Technology), ICSS TCASE Development Software (protected by Mitigator® Technology), a TCASE update or upgrade or other ICSS software (collectively, the “Software”). This License Agreement governs any and all Software in use by the Licensee. The Software may be provided with user manuals and other materials provided by ICSS or Advanced Testing Technologies, Inc. (“ATTI”) that describe one or more aspects of the Software (collectively, the “Documentation”). ATTI has provided or will provide to Licensee a USB device that is required to run the Software (the “Dongle”). The Licensee will use the Software at a U.S. Government facility (the “Designated Facility”).

1. GRANT OF LICENSE

1.1 ICSS hereby grants to Licensee a single user license to use the Software in object code form only on one computer at one time.

The Software must be used with the Dongle installed in the computer and may only be used at a Designated Facility. The Software must be used in accordance with Documentation. Licensee shall not make any Software available on any timesharing, service bureau, rental or similar basis. Licensee shall not disassemble, decompile, decrypt, extract or reverse engineer any Software (including, for example, monitoring the inputs and outputs of the Software in whole or in part for the purpose of understanding the operation of the Software), nor cause or permit anyone else to do so. The term “Software” includes both the object and source code versions, all executable files, drivers and utilities, and all updates, modifications or adaptations made to the Software by any person or party.

1.2 This license does not include the right to grant sublicenses or any right to the source code version of the Software. Licensee shall not modify or copy the Software, except that Licensee may make one copy for back-up purposes. The Software and Documentation are licensed with the express understanding of the Licensee that they are commercial computer software and commercial computer software documentation licensed subject to this License Agreement in accordance with DFARS

227.7202. Licensee shall reproduce the following legend on all back-up copies:

ICS Systems, Inc. All Rights Reserved. Use, duplication or disclosure by the U.S. Government of this Commercial Software is subject to restrictions as set forth in a License Agreement, in accordance with DFARS 227.7202. The manufacturer of this Commercial Software is ICS Systems, Inc., P.O. Box 12391, Hauppauge, New York 11788.

1.3 All Software and Documentation are and shall remain the

exclusive property of ICSS, and are restricted by U.S. copyright laws and international treaty provisions. Licensee shall have no rights in the Software or Documentation, other than the license granted hereunder.

ICSS reserves all rights with respect to the Software and Documentation under all applicable laws for the protection of proprietary information, including, but not limited to, trade secrets, copyrights, trademarks and patents.

1.4 Except as otherwise provided in this Agreement, Licensee shall not cause or permit copying, reproduction or disclosure of any portion of the Software or any Documentation, or the delivery or distribution of any part thereof to any third person or entity, for any purpose whatsoever, without the prior written permission of ICSS;

provided, however, that Licensee may disclose Software and the Documentation to a contractor, company or consultant providing services for Licensee (“Contractor”) for use at a Designated Facility in order to perform work for Licensee, provided Contractor agrees in writing to the terms and conditions of this Agreement and such written agreement is delivered to ICSS at least 30 days prior to access by the Contractor. Licensee may transfer its rights under this License on a permanent basis provided (a) Licensee transfers this License, the software and documentation and retains no copies, (b) the recipient agrees to the terms of this License Agreement, and (c) Licensee notifies ICSS in writing of the name, address and business activity of the transferee at least 30 days before the proposed transfer. ICSS shall have the right to prohibit a proposed transfer to a competitor of ICSS or on other reasonable grounds.

2. OBLIGATIONS OF ICSS

2.1 ICSS warrants that for a period of six (6) months after the date of this Agreement (“Warranty Period”), the Software will conform, in all material respects, to the Documentation. Any material deviation between the Software and the Documentation is referred to herein as an “Error.” ICSS shall use commercially reasonable efforts to correct Errors at no charge to Licensee, provided that the Error is brought to ICSS’ attention, in writing, during the Warranty Period. Errors may be corrected by ICSS’ by providing to Licensee appropriate media containing corrected versions of the affected ICSS Software. ICSS does not warrant that the Software will operate uninterrupted or be error-free.

2.2 The warranty set forth in section 2.1 is the sole and exclusive warranty made by ICSS with respect to the software and the sole and exclusive remedy of licensee in the event the software fails to conform, in all material respects, to its documentation, and all other warranties, express or implied, including, without limitation, warranties of merchantability or fitness for a particular purpose, are hereby expressly disclaimed. In no event shall ICSS be liable for any incidental, special, consequential or exemplary damages, irrespective of whether ICSS has been informed of, knew of, or

All prices are “Out Of The Box” FOB N.Y. and include instrument software drivers. Prices subject to change without notice. Individual items can not be ordered to form a system.

Source Selection Information - SEE FAR 3.104

MOD0108.indd Effective Date: 05-30-24

A2

Appendix A ICSS Software License Agreement Terms and Conditions should have known of the likelihood of such damages. ICSS’ liability for any loss whatsoever, regardless of the cause, shall not exceed the license fees paid to ICSS for the use of the software.

2.3 ICSS will indemnify and hold Licensee harmless against any damages finally awarded against Licensee to the extent such damages are based on any claim that the Software, or any portion thereof, infringes a patent, trademark, copyright, trade secret or other proprietary right of a third party, provided that Licensee provides ICSS with timely written notice of the claim. In the event any Software is held to infringe, ICSS shall, at its option and sole expense, (a) obtain for Licensee a license to continue using the Software, (b) modify or replace the Software so that it is non-infringing, or (c) refund the license fees paid to ICSS for the Software, based on five (5) year straight line depreciation from the date of installation. ICSS shall have no obligation for any claim of infringement based, in whole or in part on Licensee’s combination or use of the Software with software or equipment not furnished by ATTI or a modification to the Software made by Licensee. This Section states ICSS’ exclusive responsibility and liability with respect to infringement claims arising out of Licensee’s use of the Software.

3. COVENANTS AND OBLIGATIONS OF CONTRACTOR

3.1 Prior to access or use of the Software, Contractor shall deliver to ICSS, at P.O. Box 12391, Hauppauge, New York 11788, its written agreement to all covenants and obligations of the Licensee contained in this Agreement, including without limitations the restrictions on the use of the Software in Section 1. Further, Contractor agrees to the provisions in paragraph (c) of DFARS 252.227-7025. If Contractor desires rights to create or modify test program sets (“TPSs”), Contractor must license TCASE Development Software from ICSS before Contractor may use the Software to create or modify TPSs. Contractor may not, without written permission by ICSS, replace, modify, update, wrap or bypass through any means any of the Software in part or in whole.

3.2 Contractor shall defend, indemnify and hold ICSS and its

subcontractors, affiliates from and third party vendors harmless from all losses, damages, costs, and expenses, and Contract shall pay ICSS’ attorneys’ fees and court costs to defend or pursue a claim, arising from or in connection with (a) the use of the Software in a manner not intended or prescribed in the Documentation or the misuse of the Software by Contractor, or (b) any breach of any representation or covenant of Contractor under this Agreement.

3.3 Any and all disputes between ICSS and Contractor shall be governed by, construed in accordance with and enforceable under the applicable Federal laws, rules and regulations and the State laws governing a commercial agreement between private contracting parties entered into and performed in the State of New York.

3.4 Contractor agrees that any breach of Article 1 by Contractor would irreparably harm ICSS and monetary damages would be inadequate compensation. Contractor agrees that ICSS will be entitled to injunctive relief without the obligation to post bond.

4. GENERAL PROVISIONS

4.1 This Agreement shall become effective on the effective date first set forth above and shall continue in full force and effect until terminated upon thirty (30) days written notice. Articles 2 and 3 shall survive termination and will remain binding after the termination of this Agreement.

4.2 Licensee may terminate this Agreement at any time with or without cause. ICSS may terminate this Agreement upon any breach of Article 1, if Licensee has been provided with notice and reasonable opportunity to cure said breach. Upon termination of this Agreement, Licensee shall promptly purge all copies of the Software from any computers and storage device and return to ICSS or destroy all originals and copies of the Documentation and back-up copies of the Software. At ICSS’ request, Licensee shall certify that it has complied fully with its obligation under this Section.

4.3 This Agreement represents, constitutes and expresses the

entire agreement between the parties with respect to the use of the Software and supersedes any previous oral or written communications, representations, understandings or agreements with respect thereto.

If any provision of the Agreement is declared to be invalid, the parties agree that such invalidity shall not affect the validity of the remaining provisions of this Agreement, and further agree to substitute for the invalid provision a valid provision which approximates the intent and economic effect of the invalid provisions as closely as possible. This Agreement: (a) is subject to the Contract Disputes Act of 1978 and the Disputes clause of the Contract, if any; and (b) shall be governed by and construed in accordance with the laws and regulations governing contracts by the United States Government. Licensee shall abide by all laws, rules and regulations applicable to the Software, including all export controls laws and regulations.

All prices are “Out Of The Box” FOB N.Y. and include instrument software drivers. Prices subject to change without notice. Individual items can not be ordered to form a system.

Source Selection Information - SEE FAR 3.104

MOD0108.indd Effective Date: 05-30-24

TPS Development Each grouping may consist of 15 levels of development ranging from Complexity 0 to Complexity 14, with level 14 the most complex. Within each complexity, nine additional subcomplexity levels exist.

Example: RF TPS Development - LRU - Complexity 4.0 to 4.9

Microelectronics Simulation Analysis (MESA) for TPS Development MESA is defined as the Digital or Analog Simulation files necessary to supply stimulus and the expected output of a digital or analog SRU.

These digital or analog stimulus and response patterns or signatures can be generated by either Automatic Test Program Generation (ATPG), Automatic Waveform Analysis (AWA) generation, or Manual Test Program Generation (MTPG). Automatic Waveform Analysis or LASAR generates the corresponding output response files used to make the Automatic Test Equipment (ATE) digital or analog patterns or signatures.

On complex circuits with hybrids and gate arrays, the internal circuitry of these chips must be modeled separately or purchased. MTPG requires an intimate knowledge of the functional characteristics of all the SRU circuits. During MTPG, engineering may need to analyze the SRU circuitry and develop a functional and timing relationship between circuits. These stimulus and response patterns or signatures are used to develop the executable code utilized by ATE. Complexity is assigned from 0-6. MESA is complete when all circuits in the SRU have been modeled with either Automated Waveform Analysis, ATPG, or MTPG and the resulting digital or analog patterns or signature files have been converted which can be utilized by the ATE.

SRUs

LRUs

TPS Updates - Minor - SRUs

TPS Updates - Minor - LRUs

SRU ITAs

LRU ITAs

Complex Rollup ITAs

PADS TPS Development for SRUs or LRUs This group consists of five levels of development ranging from Complexity 1 to Complexity 5, with level 5 the most complex. Within each complexity, nine additional subcomplexity levels exist.

Example: PADS TPS Development - SRU - Complexity 1.0 to 1.9

Variant TPS Development This group consists of 11 levels of development ranging from Complexity 0 to Complexity 10, with level 10 the most complex. Within each complexity, nine additional subcomplexity levels exist.

Example: Variant TPS Development - Complexity 1.0 to 1.9

Very Complex ITA Enhancements The Very Complex ITA Enhancements consist of five levels ranging from Complexity 1 to Complexity 5, with level 5 the most complex. Within each complexity, nine additional subcomplexity levels exist.

Example: Very Complex ITA Enhancement - Complexity 1.0 to 1.9

Holding Fixtures for LRU/SRU Contact ATTI for a description of Complexity Levels.

92103985-10 CSU (Central Switching Unit) ITA Upgraded Cable Set

TPS Upgrades

TPS Rehosting

Appendix B Test Program Sets (TPS) - Terms and Conditions

B1

All prices are “Out Of The Box” FOB N.Y. and include instrument software drivers. Prices subject to change without notice. Individual items can not be ordered to form a system.

Source Selection Information - SEE FAR 3.104

MOD0108.indd Effective Date: 05-30-24

General GSA price for TPS consists of either TPS with Diagnostics or Go/ NoGo TPS which includes two (2) Program and Technical reviews and acceptance to be held at ATTI facility. GSA price includes TPS installation and checkout at one designated Buyer’s facility. Conus only, non-conus travel and per diem extra.

TPS Complexity is based upon the UUT technical evaluation using furnished data. Estimates of TPS Complexity and completion do not include reverse engineering of TPS requirements. The Buyer must provide complete technical data (Technical Order, Schematics, Test Procedures, Wire Lists, Parts Lists, and Test Requirements Document).

Buyer Furnished Equipment and Data The Buyer shall provide two (2) UUTs of each configuration 60 days ARO for the duration of the contract.

The Buyer is responsible for UUT Maintenance and Repair.

The Buyer is responsible to provide UUT data consisting of Schematics, Wire Lists, Test Specifications, and Specification Control Drawings.

The Buyer shall provide the ATE system (BRAT® or PADS) for TPS integration 60 days ARO for the duration of the program. Buyer must provide ATE Users Guide, Programming Manual, Specifications sufficient for TPS development.

TPS Acceptance Testing TPS Acceptance Testing shall be performed at ATTI facilities using ATTI commercial ATP.

Acceptance Testing consists of fault insertion and end-to-end testing.

The Buyer shall select five (5) faults per UUT for the fault insertion part of the Acceptance Test.

TPS Documentation TPS includes ITA Drawings (sufficient for ITA repair), and TPS Test Strategy Report.

Additional Buyer requested data, such as Technical Manuals, Test Requirements Documents, Logistic Support Documentation is not included, and must be separately priced.

TPS Delivery The following delivery schedule applies:

Contact ATTI for a description of Complexity Levels.

Travel Additional charges for travel and per diem will be in accordance with the Joint Travel Regulations and permission from Buyer.

Appendix B Test Program Sets (TPS) - Terms and Conditions

B2

All prices are “Out Of The Box” FOB N.Y. and include instrument software drivers. Prices subject to change without notice. Individual items can not be ordered to form a system.

Source Selection Information - SEE FAR 3.104

MOD0108.indd Effective Date: 05-30-24

C1

Appendix C BRAT Contractor Support BRAT Tester All Inclusive Support & Repairs Terms & Conditions

Description These GSA items provide program management, logistics services, repair, calibration, maintenance, data tracking of BRAT equipment, and software support (software deficiency updates). Government generated Trouble Reports (TRs) are used to initiate contractor maintenance actions. These GSA items provide Program Services (described below) and individual BRAT Trouble Report (TR) equipment maintenance, repair, and/or calibration.

Period of Performance This GSA item provides the following services for a period of performance based upon the BRAT Tester Contractor Support item chosen (i.e., 3 months, 6 months, 12 months).

Program Services ATTI will coordinate resources which will consist of repairs, calibration;

maintenance scheduling, reporting, tracking; and status reports.

Logistics Services consist of program and administrative efforts in support of equipment maintenance, repair, and calibration; and Trouble Reporting (TR) system status updates.

Government Furnished Equipment (GFE) Management The government will provide GFE in support of this contract. GFE will include BRAT testers, PATEC, and an instrument spares pool inventory.

The GFE will consist of BRAT R405B, BRAT 405BJ, PATEC, and the rotable spares pool stored as GFE at ATTI in New York. The GFE BRAT testers and PATEC will be used by ATTI to verify TR replacement and to perform calibration verification. The GFE spares pool inventory will be used to support repair and calibration TRs. Government may add additional spares as it deems necessary.

ATTI will provide for the stocking, storing, and inventorying of GFE and/ or Contractor Acquired Property (CAP). ATTI will maintain an inventory database of all Government Furnished Equipment (GFE). The ATTI GFE Database System is maintained and updated with all the information and movement associated with each asset as it travels between ATTI, the vendors used for repairs and calibrations and the various USAF sites as required by ATTI’s Policies and Procedures.

ATTI is responsible for return to the Government only the quantity of property identified in the GFE inventory schedule.

Common Maintenance Activity System (CMAS), BRAT Edition Under this GSA item, the government will continue to provide ATTI access to the CMAS, BRAT Edition. For the maintenance and support of BRAT failed items, ATTI will use the ATTI TR Tracker in conjunction with the CMAS BRAT Edition trouble reporting system provided by the government.

All BRAT users from the different USAF sites will report product failures as Trouble Reports (TR) through CMAS. A TR is generated by BRAT users when equipment in the field fails and requires instrument repair, instrument calibration, and/or cable assembly replacement. ATTI will monitor the CMAS on a daily basis and use the ATTI TR Tracker System to track failed units from TR inception, through item repair, to TR closure.

The ATTI TR Tracker System will monitor events according to contract specifications including:

REPAIR Trouble Report (TR) The following procedure applies for Repair TRs:

Procedure The procedure for the TR Process is a four (4) step process identified below:

All prices are “Out Of The Box” FOB N.Y. and include instrument software drivers. Prices subject to change without notice. Individual items can not be ordered to form a system.

Source Selection Information - SEE FAR 3.104

MOD0108.indd Effective Date: 05-30-24

C2

Appendix C BRAT Contractor Support BRAT Tester All Inclusive Support & Repairs Terms & Conditions

will advance the TR status in CMAS to “Action Taken” and update the TR System to internally closed status.

An e-mail is automatically generated upon government signature receipt.

• Upon delivery or receipt of the replacement unit, the customer will either ship the defective unit or give it directly to the field ATTI personnel. In turn, ATTI will repair or replace the defective unit.

• All of the actions taken on every single TR are tracked in the ATTI TR Tracker System.

Action Taken is updated by ATTI, the TR is closed by the Government C.O.R. It is required that the TR is closed within seven (7) days.

Government closed date.

- Once the TR is Government Closed, ATTI accounting personnel is notified by email.

out for the replacement part.

A Repair TR will be considered satisfied with the delivery of a successful self test print out for the replacement instrument. The applicable TR will be closed.

Repair Items Appendix C-1, Full Service Repair Services list details the Repair items by description and GSA part number covered by this GSA service.

Appendix C-3, Full Service Cable Assemblies list details the BRAT Cable Assemblies and miscellaneous BRAT System Assemblies by description and GSA part number covered by this GSA service. If the repair item or the cable assembly is not listed, it is not included.

CALIBRATION Trouble Report (TR) Each Instrument Calibration requires a government generated TR. All calibrated instruments require a Calibration TR to be submitted with each Repair TR submitted.

The following procedure applies for Calibration TRs:

Procedure The procedure for the BRAT instrument Calibration TR Process is a four

(4) step process identified below:

items require two (2) TRs. The BRAT user is required to submit one Calibration TR and one Repair TR.

(Contracting Officer Representative) is required to approve it by placing the TR “In Work”.

- ATTI is automatically notified of a pending TR by a system generated email.

- ATTI also tracks the CMAS on a daily basis for new TRs.

receipt of a request for replacement calibrated instrument.

The process to complete the calibration is as follows:

spares and is tested according to the TR requirement:

the customer via a commercial shipper or to ATTI’s field offices and the item will be drop shipped by ATTI’s personnel. A print out of the Calibration results along with a Government DD 1149 is included with the unit.

• Upon receipt of the item by Government personnel, ATTI will advance the TR status in CMAS to “Action Taken” and update the TR System to internally closed status. An e-mail is automatically generated upon government signature receipt.

• Upon delivery or receipt of the replacement calibrated instrument, the customer will either ship the defective unit or give it directly to the field ATTI personnel. In turn, ATTI will calibrate as required.

• All of the actions taken on every single TR is tracked in the ATTI TR Tracker System.

Action Taken is updated by ATTI, the TR is closed by the Government C.O.R.. It is required that the TR is closed within seven (7) days.

Government closed date.

- Once the TR is Government Closed, ATTI accounting personnel is notified by email.

All prices are “Out Of The Box” FOB N.Y. and include instrument software drivers. Prices subject to change without notice. Individual items can not be ordered to form a system.

Source Selection Information - SEE FAR 3.104

MOD0108.indd Effective Date: 05-30-24

C3

Appendix C BRAT Contractor Support BRAT Tester All Inclusive Support & Repairs Terms & Conditions

A Calibration TR will be considered satisfied with the delivery of a successful calibration print out for the replacement instrument. The applicable TR will be closed.

Calibration Items Appendix C-2, Full Service Calibration list details the BRAT instruments by instrument description and GSA part number covered by this GSA service. If the calibration item is not listed, it is not included.

Installation Failure In cases where a replacement item fails upon installation, the user will generate a new TR.

Items Beyond Repair Equipment may be deemed unrepairable or beyond repair due to information obtained from and provided to ATTI by the OEM.

Commercial documentation supporting the non-repairability and/ or non-supportability of an item will be provided to the BRAT PMO.

The government will provide instructions for the non-repairable item.

Turn Around Time (TAT) ATTI will ensure all TRs are completed and /or resolved within 15 working days from the date the TR is approved for contractor action.

If ATTI is unable to resolve the failure within 15 working days, ATTI will provide the government an explanation of the problem with an estimated repair date. TAT commences on the TR approval date in CMAS and is concluded by delivery to USAF custody.

SOFTWARE

(Applicable only to BRAT Tester Contractor Support - All Inclusive)

Scope – Software Updates This GSA item provides BRAT software updates necessary to support operational use of the BRAT. The software updates will be provided in support of potential BRAT software problems (software problem reports) or deficiencies (software deficiency reports). The updates will consist of BRAT commercial software, as well as, updates to government owned software; and will be limited to existing TPS’ and existing hardware. All proposed software changes will be approved by the government. Deliverables will be provided as new CPINs.

The following table identifies the ATTI COTS software and Government owned software included in this GSA item:

ATTI Commercial Software

Noun CPIN

S/W Development System 85T BRAT/SOFTWAREDEVELOPMENT- S001-00A

BRAT General Purpose ATS 85T-BRAT/WINXGENPUR/ATS-F001-00A

BRAT Self-Test 85T-BRAT/SELFTEST-S001-00A

ATTI commercial (COTS) software is subject to applicable ATTI license agreements and will be provided as runtime software only (does not include source code).

Customer Owned Software

Noun CPIN

Calibration TPS 85T-BRAT/CALIBRATION-S001-00A/D

BRAT Alignment TPS 85T-BRAT/ALIGNMENT-S001-00A/D

Customer owned BRAT TPS

Updates to Customer software will be provided with unlimited rights.

Software Deficiency Report (SDR) Identification and Submission ATTI will perform software investigation of reported potential software deficiencies of BRAT COTS software and government owned software.

Software deficiency reports (SDRs) requiring investigation may be submitted by the government or ATTI. SDRs will be limited to existing TPS’ and hardware. The BRAT Program Office (BPO) will provide work authorization for all new SDRs and will filter and prioritize SDR investigation prior to ATTI investigation and resolution. ATTI will determine the root cause of the SDR(s) and provide recommended solution(s). ATTI will perform investigation, perform testing, and provide a resolution. The government will provide technical data pertinent to the SDR(s) to the maximum extent possible. There may be situations where additional data gathering will be required by the contractor in order to adequately determine the root cause of the SDR and to develop a solution. The potential need for this additional data gathering by ATTI will be dictated by the level of detail required by the contractor to resolve the SDR.

Integration and Testing ATTI will conduct integration and testing of the proposed software changes, iteratively evaluate the test results, perform quality audit of the software, and provide a new CPIN when software updates are needed. In cases where a software update is not required, a report will be provided to the government detailing the cause of the SDR and a recommended resolution. Integration and testing will be performed using necessary hardware, software, and documentation.

All prices are “Out Of The Box” FOB N.Y. and include instrument software drivers. Prices subject to change without notice. Individual items can not be ordered to form a system.

Source Selection Information - SEE FAR 3.104

MOD0108.indd Effective Date: 05-30-24

C4

Appendix C BRAT Contractor Support BRAT Tester All Inclusive Support & Repairs Terms & Conditions

BRAT COTS Software Applicable BRAT COTS software includes instrument drivers, test executive and self-test. Updates to the BRAT COTS software are to be integrated, tested, and verified on a configured BRAT tester. Software updates will be provided as runtime software (CPIN) only and does not include source code.

Government Owned Software

1. BRAT Calibration and Alignment Software - Updates to the

BRAT Calibration and Alignment Software will be performed using the configured BRAT tester, PATEC, and the existing Calibration and Alignment CPIN software. The government must provide ATTI the latest approved CPIN software and ITA hardware when requested by ATTI. Software updates will be provided as a revised CPIN including source and executable code (CPIN-00A/D). Documentation updates will be limited to T.O. red-lined changes, if required.

2. UUT TPS on the BRAT - Applicable BRAT UUT TPS’ consist of existing approved LRU or SRU CPINs. Integration testing will be performed using a configured BRAT system capable of supporting the UUT TPS. The government must provide ATTI the latest approved CPIN software, a functional UUT, and ITA hardware when requested by ATTI. Software updates will be provided as a revised CPIN including source and executable code (CPIN -00A/D). Documentation updates will be limited to T.O. red-lined changes, if required.

Acceptance Test ATTI will conduct acceptance testing in accordance with an Acceptance Test Procedure (ATP), which will provide for performance testing and verification. The ATP will provide pass/fail criteria for the acceptance testing. The tests will be conducted at the ATTI’s facility, Hauppauge, New York. A final Acceptance Test Report summarizing the results of the acceptance testing will be submitted and will constitute finalization of the item.

All prices are “Out Of The Box” FOB N.Y. and include instrument software drivers. Prices subject to change without notice. Individual items can not be ordered to form a system.

Source Selection Information - SEE FAR 3.104

MOD0108.indd Effective Date: 05-30-24

C5

Appendix C-1 BRAT Contractor Support Full Service Repair Services (Replacement Instrument Acceptable)

Repair Services

Repair Services

Services FSR02200132-30 Vacuum Pump (Modified) Full Service Repair

Services FSR02200132-50 Compressor (Modified) Full Service Repair

Services FSR02200206-10 Air Data Test Set Case Assembly Full Service

Repair Services FSR02200207-10 Compressor/Vacuum Pump Case Assembly Full

Service Repair Services

Service Repair Services

Services FSR02300530-01 C-Size VXI Mainframe - 4 Slots Full Service Repair

Services FSR07030001-10 Z50 Digital VXI Module Full Service Repair

Services FSR07040313-10 RF Controller (RF Deck) Obsolescence Mitigation

Replacement - SW subject to License (Appendix A) Full Service Repair Services

FSR07040313-30 RF Controller (Enhanced Phase Noise) Obsolescence Mitigation Replacement - SW subject to License (Appendix A) Full Service Repair Services

FSR07040313-90 RF Controller (Comm/Nav) Full Service Repair Services

FSR07040317-10 Phase Noise Measurement Module (Enhanced) Obsolescence Mitigation Replacement - SW subject to License (Appendix A) Full Service Repair Services

FSR92103573-01 Single-Phase AC Programmable Power Supply Full Service Repair Services

Services FSR92103851-01 20 MHz Pattern I/O Module Full Service Repair

Services FSR92103852-01 Terminating 20 MHz Pattern I/O Module Full

Service Repair Services

Service Repair Services

Repair Services

Distribution Box Full Service Repair Services FSR93000068-01 QUAD 8-Bit Digital Input/Output Latch Full

Service Repair Services FSR93000069-01 A/B to C-Size Module Carrier Full Service Repair

Services FSR93000074-01 64-Channel Relay Multiplexer Full Service Repair

Services

Services FSR93000078-01 High-Performance Universal Counter Full Service

Repair Services FSR93000079-01 1-GSa/s Digitizing Oscilloscope Full Service

Repair Services FSR93000080-01 Arbitrary Function Generator Full Service Repair

Services FSR93000081-01 21 MHz Synthesized Function/Sweep Generator

Full Service Repair Services

Services

Resolution Full Service Repair Services FSR93000172-01 RF Section (100 Hz to 22 GHz) Full Service Repair

Services FSR93000173-01 IF Section (10 Hz to 300 KHz) Full Service Repair

Services FSR93000200-01 Preamplifier (26.5 GHz) Full Service Repair

Services

Services

Repair Services FSR93000550-30 Three-Phase AC Programmable Power Supply Full

Service Repair Services FSR94000104-10 RF Interface Unit (RFIU) Mainframe Full Service

Repair Services

All prices are “Out Of The Box” FOB N.Y. and include instrument software drivers. Prices subject to change without notice. Individual items can not be ordered to form a system.

Source Selection Information - SEE FAR 3.104

MOD0108.indd Effective Date: 05-30-24

C6

Appendix C-1 BRAT Contractor Support Full Service Repair Services (Replacement Instrument Acceptable)

Services

Services FSR94000855-01 Microwave Signal Generator Full Service Repair

Services FSR94000887-01 DC Power Supply Frame Full Service Repair

Services FSR94000888-01 0 to 7 V Module for DC Power Supply Full

Service Repair Services FSR94000889-01 0 to 20 V Module for DC Power Supply Full

Service Repair Services FSR94000890-01 0 to 32 V Module for DC Power Supply Full

Service Repair Services FSR94000891-01 0 to 320 V Module for DC Power Supply Full

Service Repair Services FSR94000982-01 Precision Frequency Reference with Internal

Amplifier Full Service Repair Services FSR94100500-130 Electronic Power Control Center - Single Phase

Full Service Repair Services FSR94100500-370/-50 Electronic Power Control Center - RF Rack/Single

Phase Full Service Repair Services FSR94100554-10 Phase Balance Module Full Service Repair

Services

Services FSR94100751-01 Three-Phase Power Supply (Master) Full Service

Repair Services FSR94100752-01 Three-Phase Power Supply (Slave) Full Service

Repair Services FSR94100766-10 Timing Generator Module Full Service Repair

Services FSR94101013-50 Phase Noise Measurement System Reference

Source Unit Full Service Repair Services FSR94101130-01 Phase Noise Measurement System Full Service

Repair Services FSR94101177-01 136-Channel Logic Analyzer Full Service Repair

Services FSR95000018-03 Microwave Network Analyzer Full Service Repair

Services FSR95000019-03 MIL-STD-1553A/B Bus Analyzer Simulator Full

Service Repair Services FSR95000045-01 0 to 160 V Module for DC Power Supply Full

Service Repair Services

Service Repair Services FSR95000340-01 Microwave Network Analyzer Calibration Kit Full

Service Repair Services FSR95000450-10 Auxiliary RF Signal Processor/Matrix Full Service

Repair Services FSR95000450-50 Auxiliary RF Signal Processor/Matrix Full Service

Repair Services FSR96000001-01 50 MHz Digital Interface Timing Module Full

Service Repair Services FSR96000001-03 50 MHz Timing/Control Module Full Service

Repair Services FSR96000002-01 50 MHz TTL/CMOS/ECL Pattern Module Full

Service Repair Services FSR96000007-01 50 MHz Variable Level Pattern Module Full

Service Repair Services FSR96000012-01 32-Channel Differential ECL I/O Module Full

Service Repair Services FSR96000013-01 Timing Module Extension Card (Dual) Full Service

Repair Services FSR96000013-03 Timing Module Extension Card (Single) Full

Service Repair Services FSR96000014-01 High Power Mainframe - 6 Slots Full Service

Repair Services FSR96000014-03 High Power Mainframe - 13 Slots Full Service

Repair Services FSR96000015-01 Current Sharing Power Supply Full Service Repair

Services

Repair Services FSR96000021-01 1 KW Programmable Power Supply Full…